Ansul

Email us at:[email protected]

HEAD OFFICE -SINGAPORERAAH INTERNATIONAL RAAH INTERNATIONAL PTE LTD UBI Techpark #07-19 (LOBBY B) 10 UBI Crecent, Singapore

BRANCH OFFICEU.S.ABuilding 4 Unit #5, 2860 Ogletown Road,Newark DE 19713 USA

BRANCH OFFICEINDIAOffice No. G-15 , Sacred World Mall , Wanowrie, PUNE -411040, India

BRANCH OFFICEMALAYSIAC-33-2-3, Block C, Jaya One, No. 72A Jalan Universiti, 46200 Petaling Jaya,

BRANCH OFFICEINDONESIAWisma Iskandarsyah A-10, Jalan Iskandarsyah Raya Kavling 12-14, Jakarta

FOAM SYSTEMS MOBILCART

TRAILERS

The Foam Systems Mobilcart is designed to provide mobile reghting foam capability for various hazardous areas where ammable liquids are present. Common applications include tank farms and reneries, loading areas, chemical processing plants, diked areas, warehouse facilities, paint storage areas, and other manufacturing areas where ammable liquids are a hazard.liquids are a hazard.

The Mobilcart is a highly maneuverable wheeled cart consisting of a polyethylene tank with two built-in hose storage locations, an eductor with metering valve, and two lengths of re hose with a choice of foam nozzles.

High volume foam storageHigh capacity owExtremely mobileRugged construction with tandem axle, electric brakes and two rear stabilization jacks5,000 lb (2,268 kg) gross vehicle weight rated trailer meets DOT requirementsHose bins on each sideHose bins on each sideMonitor with low friction-loss and 3 in. valve with position indicator4 in. inlet piping with 2.5 in. wye con-nection on each sideIncludes the ANSUL Master Storage tote is 265 gal (1,003 L) capacity, constructed of high density polyethylene, and protected by a rigid welded galvanized tubular steel gridQuick tote hold down for easy tote transfer

****

**

**







PORTABLE HIGH-EXPANSION FOAM GENERATORS

FOAM MONITORS

Depending on the type of hazard and its congura-tion, Portable High-Expansion Foam Generators may be used for total ooding applications involving three-dimensional hazards. The generators may also be used for local application on spill res or for vapor suppression.Water damage is minimized when using high expanWater damage is minimized when using high expan-sion foam. Common applications for this equipment include warehouses, ship holds, engine rooms, machinery spaces, electric cable ducting, mining, communications switching rooms, basements, cellars and enclosed spaces, LNG spill res and vapor sup-pression, and smoke extraction (with optional smoke extraction ducting).extraction ducting).

Foam Monitors control the horizontal and vertical directions of large capacity discharge streams. Water-oscillating monitors automatically move side-to-side using water pressure as the energy source. Remote controlled monitors use an electric joystick to control horizontal, vertical and stream pattern. Other monitors are operated manually using a tiller bar or housewheel.

Many monitor model are available including manual, FJM (high ow), and water oscillating with a variety of nozzle options including master stream non-aspirated monitor nozzles, and AFN air-aspirating nozzles.







STORAGE TANK PROTECTION EQUIPMENT

HIGH EXPANSION GENERATORS

Foam Chambers and Foam Makers are air-aspirating foam discharge devices designed to protect ammable liquid storage tanks by applying foam down the inside wall of the tank.

Foam Chambers are designed to generate foam and apply Foam Chambers are designed to generate foam and apply the expanded foam to the fuel surface in a manner that lessens submergence and agitation as the foam contacts the fuel.

Foam Makers include High Back-Pressure, Floating Roof Foam Makers, and Rim Seal Foam Pourers.

JET-X High-Expansion Foam Generators deliver large quantities of expanded foam by blowing air through a screen coated with a high-expansion foam solution. Because of its high expansion ratio (up to 1000:1), little water is required to generate large quantities of foam. This dramatically cuts the cost of these systems and has the additional benet of reducing the system footprint.

The high and medium expansion foam systems offer a The high and medium expansion foam systems offer a re extinguishing procedure that overwhelms the re with the sheer volume of foam. The foam blanket that is produced transports water to the re, suffocates and cools the re, suppresses escaping vapors and encapsu-lates the toxic vapors and particulate.







BLADDER TANKS

BALANCED PRESSURE PUMP PROPORTIONING SYSTEMS (PUMP SKIDS)

Bladder Tanks are a component of a balanced pressure pro-portioning system that includes a pressure-rated tank with an internal elastomeric bladder for foam concentrate storage. Upon system actuation, incoming water applies pressure to the concentrate in the bladder, which supplies pressurized concentrate to the proportioning device. The device meters the foam concentrate into the re water line, creating foam solution. The solution is then piped to the discreating foam solution. The solution is then piped to the dis-charge devices protecting the hazard area.

Bladder tanks have numerous applications, including truck loading racks, aircraft hangers, dip tanks, pump rooms and helipads.

The Balanced Pressure Pump Proportioning System func-tions by maintaining an equal pressure in the foam con-centrate and water inlets to the proportioner, allowing the proportioner to be used over a wide range of ows and pressures. The system connects to an atmospheric storage tank which allows relling during operation. Controls respond quickly and accurately to changes in the water inlet pressures and ow rates.

The system operates by passing the required portion of foam concentrate from a positive displacement pump to a venturi proportioner with the remaining portion recir-culating through a diaphragm valve in the return line to the tank.







IN-LINE BALANCED PRESSURE PROPORTIONERS

PROPORTIONERS

Proportioning Equipment introduces a foam concentrate into a owing stream of water to produce a foam solution. There are many methods of proportioning, but xed foam systems typically use balanced pressure proportioning equipment such as the In-Line Balanced Pressure Propor-tioner. This proportioner is similar to a pump skid except it is a separate assembly that offers the advantage of propor-tioning the foam concentrate at a location remote from the tioning the foam concentrate at a location remote from the tank and pump.

The units are available in six standard sizes to supply pro-portioners ranging from 2 to 8 inches with ow rates from 30 to 5,500 gpm (114 to 2,082 Lpm).

Proportioning Equipment introduces the foam concen-trate into a owing stream of water to produce a foam solution. There are many methods of proportioning, but xed foam systems typically use balanced pressure pro-portioning equipment. All balanced pressure systems use a modied venturi device called a proportioner or ratio controller.

Proportioners are available in a variety of sizes and styles to match required ow ranges and pipe sizes. Each pro-portioner consists of a body, inlet nozzle, and metering orice—all of which are corrosion-resistant brass.

********







INERGEN SYSTEMS - INERT GASES

SAPPHIRE SYSTEMS - HALOCARBON

The INERGEN Fire Suppression System protects enclosed areas where people may be present, re may strike day or night, and damage from conventional agents cannot be tolerated. Upon discharge, INERGEN agent lls the room, mixing with the air to suppress res quickly and effectively. Safe for people, INERGEN agent is non-synthetic and made of naturally occurring gases: nitrogen, argon, and carbon dioxide. Once discharged, it returns to the atmosphere in its natural state.Automated tape storage librariesAutomated tape storage librariesComputer and data processing facilitiesCultural and historical sitesHospital and major medical facilitiesMarine/offshore/navalMuseums and art galleriesPower generation facilitiesTelecommunication facilities

The SAPPHIRE system uses 3M Novec 1230 re protection uid for total ooding applications. The clear, colorless agent has zero ozone depletion potential, an atmospheric lifetime of just ve days, and a global warming potential of 1.0. The SAPPHIRE system suppresses a re before it can be fully engaged and once the re is suppressed, Novec 1230 quickly evaporates without harming any valuable assets.

Effective on Class A, B and C resEffective on Class A, B and C resLong-term, sustainable alternative to Halon, HFCs, and PFCsUL/ULC listed and approvedFM Approved

**********

*****

***

*

*

*****







HIGH PRESSURE CARBON DIOXIDE SYSTEMS

BULK - LOW PRESSURE CARBON DIOXIDE SYSTEMS

Typical hazards protected by carbon dioxide systems include printing presses, vaults, open pits, dip tanks, spray booths, ovens, engine rooms, coating machines, process equipment, hoods and ducts, am-mable gas or liquid storage areas, and generators.

No residueNon-corrosive and non-conductiveSuitable for Class A, B, and C hazardsFixed nozzle and/or hose reel agent distributionFixed nozzle and/or hose reel agent distributionUL, ULC, and FM approvedRemote manual pull stationsCorner pulleysDoor closuresPressure trips

FM approved and listedAutomatic detection and controlClass A, B, or C resWide range of CO2 storage units available (3 3/4 ton to 46 ton capacity)Hydraulic program for piping design and nozzle sizingCO2 storage units are saddle mountedLow-prole designLow-prole designMeets NFPA 12 requirementsSelector valves with spring-return actuators, solenoid valves, and pneumatic delay timers available-Distribution of CO2 is accomplished through a selector valve, master/selector valve or a hand-hose line arrangementHand-hose lines can be supplied from a separate low pressure storage unit or connected to the same storage unit that supplies a xed pipe system

Transfer switchesTime delaysPneumatic switchesWeighing devicesBells and sirens

**********







AQUASONIC SYSTEM

DRY CHEMICAL PIPED

The AQUASONIC Water-Atomizing Fire Suppression System is a revo-lution in Class B re protection technology. The high performance re suppression system is specically engineered to protect special hazard applications including combustion turbine enclosures, machinery spaces, generator enclosures, and ammable liquid storage areas.

Safe for peopleEnvironmentally safeFM ApprovedEffective suppression of Class B combustiblesMinimal water dischargeOptimized protected volume with minimal piping and system discharge devicesFlexible system piping and atomizer locationFully self-contained skid for volumes up to 9200 ft3 (260.5 m3)Automatic detection and actuation and/or remote manual actuationAutomatic detection and actuation and/or remote manual actuation

The Dry Chemical Piped Fire Suppression Systems are designed to provide full-time re protection in high-risk areas where large, poten-tially disastrous res could occur. They use proven technology for fast knock down of the toughest ammable liquid and gas res and provide a means of detection and suppression for complex hazards that are too difficult and inaccessible for manual means of reghting.

Typical applications include petroleum and petrochemical loading Typical applications include petroleum and petrochemical loading racks, renery processing equipment, product transfer and storage areas and offshore platforms; marine tanker decks, machinery spaces and loading docks; paint spray booths, dip and quench tanks, ware-houses, hazardous materials storage buildings, machinery lubricating systems, and ammable liquid storage areas; and many other settings. For large industrial applications, large xed nozzle piped systems provide up to 3000 lb. (1360.8 kg) of dry chemical extinguishing agent.provide up to 3000 lb. (1360.8 kg) of dry chemical extinguishing agent.







DRY CHEMICAL SKID

I-101 INDUSTRIAL FIRE SUPPRESSION SYSTEM

The ideal dry chemical system should combine the ex-ibility of hand portable re extinguishers with the power to knock down large Class B (ammable liquids and gases) and Class C (energized electrical) res. Featuring large agent capacity and long discharge time, the Large Dry Chemical System offers the chance to use only the amount of agent necessary to suppress the re. Plus, the tremendous dry chemical ow rate provides the power tremendous dry chemical ow rate provides the power needed to ght three-dimensional res and pressurized gas/liquid res.Available in capacities of 50 to 3,000 lb (22.7 to 1360.8 kg), the system is especially effective in areas where hand portable and wheeled extinguishers may not typically provide sufficient capacity.

The I-101 Industrial Fire Suppression System has been pre-engineered for industrial hazards like paint spray booths, dip tanks, and ammable liquid storage rooms.

Designed for exibility and economy, the system features mechanical or electrical detection, total ooding or local application methods, two extinguishing agent options, and multiple tank capacities for Class A, B, and C re hazards in a wide variety of industrial congurations.







SENTRY STORED PRESSURE DRY CHEMICAL EXTINGUISHER

SENTRY HIGH-FLOW STORED-PRESSURE FIRE EXTINGUISHERS

SENTRY Industrial Dry Chemical Extinguishers

SENTRY Carbon Dioxide Extinguishers

SENTRY Water Extinguishers

RED LINE WHEELED UNITS CARBON DIOXIDE

RED LINE Carbon Dioxide Wheeled Fire Extinguishers are designed to protect areas where Class B (ammable liquids and gases) or Class C (energized electrical equipment) res could occur. They may be used indoors where winds and drafts do not affect discharge or where a clean extinguishing agent is required. These extinguishers provide maximum protection in settings such as aircraft hangars, paint spray booths, quench tanks, and metal tube manufacturing.

RED LINE WHEELED UNITS DRY CHEMICAL

These heavy-duty wheeled units have greater extinguishing agent capacities than hand portable re extinguishers, yet are highly mobile and can be fully operated by one person. Large diameter steel wheels quickly and more easily move the unit to the source of the re, while the quick-opening valve option allows for fast, one-step actuation.







RED LINE CARTRIDGE-OPERATED HAND PORTABLES—DRY CHEMICAL

CLEANGUARD CLEAN AGENT EXTINGUISHERS

Ergonomically designed for maximum operator performanceMeets or exceeds requirements of ANSI/UL 299 and 711 or ULC S504 and S508USCG approved with proper bracketFM ApprovedSimple and safe operationMaintenance checks can be easily made on every moving partField rechargeableFour sizes (5, 10, 20, and 30) available with many Field rechargeableFour sizes (5, 10, 20, and 30) available with many optionsField replacement metal cartridge guard option available for 20 and 30 lb extinguishersChoice of dry chemical agents to satisfy specic protection requirementsClass D dry powder agents are available in 30 lb extinguisher models onlyTwelve-year limited warrantySold and serviced through a network of independent distributorsSold and serviced through a network of independent distributors

Meets or exceeds requirements of ANSI/UL 2129 and 711/ULC S508 and S566Listings and approvals include UL, ULC, and FAASimple operation and maintenanceTough, glare-resistant, one-piece mylar nameplatesRechargeableManufactured of durable high quality materialsOperating temperature range is –40 °F to 120 °F (–40 °C to Operating temperature range is –40 °F to 120 °F (–40 °C to 49 °C)Large, easy-to-read pressure gaugeSix-year limited warranty from date of delivery to original end-user purchaser

**

*

*

*

*****

*

*******

*







ANALOG ADDRESSABLE SYSTEMS

Certied for seismic applications when used with the appropriate seismic mounting kitApproved for marine applications when used with listed compatible equipmentIsolated intelligent Signaling Line Circuit (SLC) Style 4, 6, or 7Up to 159 detectors (any mix of ion, photo, thermal, or multi-sensor) and 159 modules (NO manual stations, two wire smoke, notication, or relay); 318 devices maximumA 2x40 character displayFour Notication Appliance Circuits (NAC) providing 1.5 Amps A 2x40 character displayFour Notication Appliance Circuits (NAC) providing 1.5 Amps each with built-in Class A/B wiring options; Selectable System Sensor, Wheelock, or Gentex strobe synchronizationBuilt-in alarm, trouble, and supervisory relaysVeriFire Tools online or offline programming utilityAutoprogramming and Walk Test reportsOptional universal 318-point DACTUp to 32 remote annunciators can be added on Optional universal 318-point DACTUp to 32 remote annunciators can be added on EIA-485 busEIA-485 annunciators, including custom graphicsEIA-232 port for printing or PC connectionHistory le with 800-event capacity in nonvola-tile memory, plus separate 200-event alarm-only leFlashScan intelligent featuresVIEW (Very Intelligent Early Warning) smoke detection technologyAcclimate Plus low-prole intelligent multi-sensorVarious releasing features

AUTOPULSE detection, control and re suppression system release panels provide automatic 24/7 re protection. Agent Releasing Control Panels are designed with modularity and easy system planning. The panels can be congured with just a few devices for small building applications or for a large campus or high-rise application. Peripheral equipment can be added to suit the application.added to suit the application.

***

*

******

**

**







CONVENTIONAL SYSTEMS

Designed for sprinkler standards NFPA 13, 15, and 16Dual hazard operationManual release/abort combination zoneAdjustable waterow discharge timer and two soak timersCross-zone (double-interlock) capabilitySix programmable Style B (Class B) IDCs (Initiating Device Circuits)System sensor i3 series detectors compatibleFour programmable style Y (Class B) output circuits – (special application power)Four programmable style Y (Class B) output circuits – (special application power)Strobe synchronizationThree programmable Form-C relaysLatching options for relaysPre-discharge relay option7.0 amps total 24 VDC output currentResettable and non-resettable output powerBuilt-in programmerANN-BUS for connection to optional devices80-character LCD display Real-time clock/calendar with daylight savings time controlReal-time clock/calendar with daylight savings time controlHistory log with 256 event storagePiezo sounder for alarm, trouble, and supervisory24 volt DC operationLow AC voltage senseOutputs programmable for releasing circuits or NACsNACs programmable for silence inhibit and many other featuresDisable/enable control per input zone and output zoneExtensive transient protectionExtensive transient protectionAutomatic battery charger with charger supervision

AUTOPULSE detection, control and re suppression system release panels provide automatic 24/7 re protection. Detection options include smoke, heat and ame detection. The control panels process detection signals from protected areas and immediately perform key operations including sounding alarms, shutting down equipment and releasing the re suppression system.system.

*************************







SPILL-X CHEMICAL SPILL CONTROL

Reduces downtime and disposal costsMultiple sizes and formulationsNeutralizes and solidies acids/causticsSuppresses formaldehyde vaporsAdsorbs solventsSingle-step agent applicationRenders neutral salt for clean-up and disposalFree-owing agent can be applied directly from pail, shaker, drum, or with SPILL-GUN Free-owing agent can be applied directly from pail, shaker, drum, or with SPILL-GUN applicatorEasy-open pail cover makes tools unnecessary and reduces spill response timeComplete instructions with pictograms guide the user from start to nish during spill clean-upInstructions include application list of eld-tested chemicalsApplication rates for the most common acid spills included in Spill Guide Treatment bookInstruction, safety equipment, treatment guide, and pH strips provided in Spill Kits

SPILL-X TREATMENT KIT

The SPILL-X Treatment Kit has been developed to eco-nomically treat small spills of many mineral and organic acids, caustics, formaldehyde, and organic solvents or fuels that may occur in laboratories or other work areas where chemicals are used.

The treatment kit provides easy access to the proper spill control agent for a particular chemical spill. Six easy to handle polypropylene containers allow for either a pouring-type application of agent or a shak-er-type application, depending on the nature of the spilled chemical. Each container treats up to a 1/2 gal (1.9 L) spill, or approximately 15 to 20 ft2 (1.4 to 1.9 m2).m2).

********

**

*







SPILL-GUN APPLICATORS

Chemical spills can quickly become hazardous waste situations. ANSUL’s SPILL-X products treat spills and can be applied by means of various application options, includ-ing the rugged and easy-to-use SPILL-GUN Applicators. These versatile applicators can be recharged in the eld. They apply a SPILL-X free-owing, dry chemical agent from a distance of 10 to 12 ft (3.0 to 3.7 m) and can treat up to a 3 gal (11.4 L) spill, or 100 ft2 (9.3 m2). Their application is for use when spills ow underneath equipment and other hard to reach places.

The SC-30 SPILL-GUN applicator can be used with the following agents:

SPILL-X-A—For mineral and organic acids

SPILL-X-C—Ffor caustic and organic bases

SPILL-X-S— For common hydrocarbon solvents and fuels

The spill control applicator consists of a spill control agent container, an expellant gas The spill control applicator consists of a spill control agent container, an expellant gas cartridge, a discharge hose, and a shut-off nozzle. Suitable integral equipment permits uidization of the spill control agent, pressurization of the container, and discharge of the spill control agent from the applicator while being operated from its normal upright position. All spill control applicators are manufactured with corrosion-resistant surfaces.

Date post:	07-Aug-2015
Category:	Engineering
Upload:	fakhri-poonawala-raah-international
View:	100 times
Download:	0 times

Ansul

Engineering