+ All Categories
Home > Documents > Antennas for TETRA Networks

Antennas for TETRA Networks

Date post: 27-Dec-2015
Category:
Upload: santosh-kumar
View: 96 times
Download: 11 times
Share this document with a friend
Description:
Antennas for TETRA Networks
Popular Tags:
12
Antennas for TETRA Networks
Transcript
Page 1: Antennas for TETRA Networks

Antennas for

TETRANetworks

Page 2: Antennas for TETRA Networks

Introduction

Amphenol Antenna Solutions, a division of Amphenol Corporation (APH), designs and manufactures antenna technology for TETRA, PMR, Air Radio, Marine, Automobile and Broadcast industries. With over 80-years of experience, Amphenol’s comprehensive range consists of 600 products serving system integrators, installer- and network operators.

Our Private Networks division offers a bespoke design service to create an antenna product that exactly matches the electrical and mechanical characteristics required by our customers, or, we can make minor modifi cations to existing designs, all tested in-house on our outdoor range and indoor anechoic environments.

Amphenol Antenna Solutions operates from eight strategically located manufacturing and R&D centres around the world: USA (2), Mexico, Brazil, France, UK, India and China. With teams of engineers in each regional market working directly with OEMs, operators, system integrators and installers, Amphenol remains at the forefront of relevant antenna design.

This guide is designed to offer an overview of the product line for TETRA networks. More products and technical data can be found on our website: www.amphenol-antennas.com

Page 3: Antennas for TETRA Networks

Yagi AntennasV-Pol or H-Pol 4 / 6 / 8 Elements

Our Yagi antennas offer a wide frequency band (380-430 MHz) for Trunked Radio TETRA applications. Produced to the highest quality standards, these robust antenna designs will ensure reliable operation in harsh environmental conditions.

Low IMP-rated models provide consistently lower noise floor over the life of the antenna, essential for multi carrier transmission.

380-430 MHz

Characteristics

Part Number 7041410 7042410 7043410

Elements (Qty) 4 6 8

Frequency Band 380-430 MHz 380-430 MHz 380-430 MHz

Polarisation vertical or horizontal

vertical or horizontal

vertical or horizontal

Horizontal Beam Width 90˚ 64˚ 58˚

Vertical Beam Width 60˚ 50˚ 51˚

Gain 7.0 dBd 8.5 dBd 10 dBd

VSWR 1.5:1 1.5:1 1.5:2

IM3 (2 x 20W) -106 dBm -106 dBm -106 dBm

Connector 7/16 female 3m RG214

7/16 female 3m RG214

7/16 female 3m RG214

Length 890mm (35") 115mm (43.9") 1413mm (55.6")

Wind Load @ 160 kph (100 mph)

79 N (17.8 lb ft) 94 N (21.1 lb ft) 102 N (22.9 lb ft)

Page 4: Antennas for TETRA Networks

Colinear AntennasV-Pol 360-degree 3- & 5.5 dBd

A rugged and durable UHF Colinear antenna housed inside a high-strength, glassfibre shroud and includes an integrated mounting clamp allowing easy installation on poles or horizontal rails.

Produced to the highest quality standards, these robust antenna designs will ensure reliable operation in harsh environmental conditions.

Available options include 7/16 female connectors together with RG214 which provide an IMP-rated product.

380-430 MHz

Characteristics

Part Number 7533395 7533400

Frequency Band 380-410 MHz 400-440 MHz

Polarisation vertical vertical

Horizontal Beam Width 360˚ 360˚

Vertical Beam Width 35˚ 35˚

Gain 3.0 dBd 3.0 dBd

VSWR 1.5:1 1.5:1

Connector N female 0.3m RG213 (7/16 and RG214 options)

N female 0.3m RG213 (7/16 and RG214 options)

Length 1500mm (59.1") 1500mm (59.1")

Wind Load @ 160 kph (100 mph)

35 N (7.9 lb ft) 35 N (7.9 lb ft)

Page 5: Antennas for TETRA Networks

Colinear AntennasV-Pol 360-degree 3- & 5.5 dBd

380-430 MHz

Characteristics

Part Number 7536395 7536400

Frequency Band 380-410 MHz 400-430 MHz

Polarisation vertical vertical

Horizontal Beam Width 360˚ 360˚

Vertical Beam Width 17˚ 17˚

Gain 6.0 dBd 6.0 dBd

VSWR 1.5:1 1.5:1

Connector N female 0.3m RG213 (7/16 and RG214 options)

N female 0.3m RG213 (7/16 and RG214 options)

Length 2700mm (106.3") 2700mm (106.3")

Wind Load @ 160 kph (100 mph)

73 N (16.4 lb ft) 73 N (16.4 lb ft)

Page 6: Antennas for TETRA Networks

Heavy Duty/High PerformanceColinear AntennasV-Pol 360-degree 4.9 / 5.4 / 8.9 dBd

A range of heavy-duty “lightning proof” Colinear antenna designed for use in TETRA networks.

Antennas in this range are carefully designed to minimise low passive intermodulation products to help reduce network interference.

These antennas are housed inside a high-strength glassfibre shroud and manufactured to the highest quality standard ensuring long term reliable operation.

380-430 MHz

Characteristics

Part Number *7586680 7586700 7549200

Frequency Band 380-400 MHz 380-400 MHz 380-400 MHz

Tilt Options 0,3,6,8,12 degree 0,3,6,8,12 degree 0,6 degree

Polarisation vertical vertical vertical

Power Ratings 300 W 300 W 300 W

Horizontal Beam Width 360˚ 360˚ 360˚

Vertical Beam Width 18˚ 18˚ 18˚

Gain 4.9 dBd 5.4 dBd 8.9 dBd

VSWR 1.5:1 1.5:1 1.5:1

Lightning Protection Yes Yes Yes

PIM (2 x 20W) -110 dBm -110 dBm -110 dBm

Connector 7/16 female 7/16 female 7/16 female

Length x Diameter 2760 x 56mm 2995 x 56mm 5125mm

Wind Load @ 160 kph (100 mph)

35 N (7.9 lb ft) 35 N (7.9 lb ft) 35 N (7.9 lb ft)

Wind Survival 300 kph(180 mph)

300 kph(180 mph)

* Wide Band (380-430 MHz) coming soon

Page 7: Antennas for TETRA Networks

Dual Polarised Panel AntennasX-Pol / 80 degree / fixed downtilt / 11.8 dBd

A high gain, dual-polarised, panel antenna designed for TETRA network applications. These aesthetically pleasing, low-profile antennas are available in a variety of fixed electrical beamtilts to facilitate network optimization.

Produced to the highest quality standards these robust designs will ensure reliable operation in harsh environmental conditions.

380-430 MHz

Characteristics

Part Number 5043XXX

Frequency Band 380-430 MHz

Polarisation 45 degrees

Downtilt Options 0˚,10˚,15˚

Horizontal Beam Width 80˚

Vertical Beam Width 19˚

Gain 11.8 dBd

VSWR 1.5:1

Connector 7/16 DIN female

IM3 <-153 dBc

Dimension 2000 x 400 x 195mm

Wind Load @ 160 Kph (100 mph)

1000N

Page 8: Antennas for TETRA Networks

4 stack Dipole Array AntennasV-Pol / 160-degree / fixed downtilt / 9.0 dB

A heavy-duty array of four centre-fed dipole antennas with phasing harness mounted on an aluminium boom designed for TETRA network applications.

Antennas in this range are carefully designed to minimise low passive intermodulation products to help reduce network interference.

Produced to the highest quality standards, these robust antenna designs will ensure reliable operation in harsh environmental conditions.

380-430 MHz

Characteristics

Part Number 71482XX HD

Frequency Band 380-430 MHz

Polarisation vertical

Downtilt Options 0˚,10˚,15˚

Horizontal Beam Width 160˚

Vertical Beam Width 17˚

Gain 9.0 dBd

VSWR 1.5:1

Connector 7/16 DIN female(4 m RG214)

IM3 <-143 dBc

Dimension 2600 x 132 x 110mm

Wind Load @ 160 Kph (100 mph)

190N

Page 9: Antennas for TETRA Networks

In Building AntennasV-Pol or Linear Pol / 360- or 106-degree /various gains

A range of omni-directional and directional, low profile, fully shrouded UHF antennas for indoor applications. Models available for wall and ceiling mounting, all carefully designed to ensure maximum efficiency with an unobtrusive design to be more aesthetically pleasing.

380-430 MHz

Characteristics

Part number MA100PQ01 5047XXX 5211XXX

Frequency Band 380...430 MHz 380-400or 410-430 MHz

380-395or 410-430 MHz

Polarisation linear vertical vertical

Horizontal Beam Width 360˚ 106˚ 360˚

Vertical Beam Width 80˚ 112˚ 80˚

Gain 0 dBd 2.4 dBd 0 dBd

VSWR 1.5:1 1.5:1 2.1:1

Connector none N female 0.5 m RG303

N female 0.5 m RG58

Dimension 178 x 35mm 305x225x60mm 202x70mm

Page 10: Antennas for TETRA Networks

Amphenol Site Solutions

Amphenol’s business units service the world’s leading mobile operators and OEM’s through a network of offices, agents and manufacturing locations in over 60 countries.

To provide our customers with a complete Site Solutions portfolio, Amphenol Site Solutions offers access to all of these global product lines, providing a one source, single point of contact and support.

For a detailed overview please visit our websitewww.amphenolsitesolutions.com

or email [email protected]

Product Offering Overview Base Station Antennas, Combiners/Filters, TMA’s, Feeder Cable, Jumper Cables, RF connectors, Surge Arrestors, Cable Mounting, Earthing Kits and much more.

Amphenol products are globally approved by all leading OEMS inc Ericsson, Alcatel Lucent, NSN, Huawei and ZTE.

Page 11: Antennas for TETRA Networks

Notes

Page 12: Antennas for TETRA Networks

Contact InformationCustomer Service CentrePrivate Networks

Amphenol Antenna Solutions, Rutherford DrivePark Farm South, WellingboroughNorthamptonshire, NN8 6AX United Kingdom

Tel: +44 (0) 1933-408408 Fax: +44 (0) 1933-408404E-mail: [email protected]: www.amphenol-antennas.comUK Shop: www.amphenolantennasolutions.co.uk

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.


Recommended