Installation Leaflet - AnyBus-PCI Profibus DPV1 Master Rev 1.05 - Part no. SP0781 Web: www.anybus.com HMS Industrial Networks AB AnyBus-PCI Profibus DPV1 Master Package Contents The AnyBus-PCI Profibus DPV1 Master package consists of the following items: Anybus-PCI Profibus DPV1 Master card This installation leaflet CD-ROM containing software drivers, SDK and documentation PCI Card Overview Status LED:s Warning! The AnyBus-PCI Profibus DPV1 Master card contains ESD (Electrostatic Discharge) sensitive components. Be sure to observe ESD precautions when installing the card; do not touch any circuits or connectors, and handle the card only by its edges. # Indication State Meaning 1 Active Off PCI card not active Green PCI card active (i.e. Transport Path open) 2 Application Led - Controlled by software (ABS_SetApplicationLed()) 3 Master Status Green Operate Mode Green, flashing Clear Mode Red Stop Mode Off Offline 4 Token Hold Green Master has the token Off Master does not have the token 5 Database Status Green Database OK Green, flashing Database download in progress Red Database invalid Off No database downloaded 6 Communication Status Green Data exchange with all configured slaves Green, flashing Data exchange with at least one configured slave Red Bus control error (possible short circuit or configuration error) Off No data exchange with any of the configured slaves 1 3 5 2 4 6 PCI Edge Connector Status LED:s Profibus Connector Config Connector
Warning!The AnyBus-PCI Profibus DPV1 Master card contains ESD (Electrostatic Discharge) sensitive components. Be sure to observe ESD precautions when installing the card; do not touch any circuits or connectors, and handle the card only by its edges.
# Indication State Meaning1 Active Off PCI card not active
Green PCI card active (i.e. Transport Path open)2 Application Led - Controlled by software (ABS_SetApplicationLed())3 Master Status Green Operate Mode
4 Token Hold Green Master has the tokenOff Master does not have the token
5 Database Status Green Database OKGreen, flashing Database download in progressRed Database invalidOff No database downloaded
6 Communication Status Green Data exchange with all configured slavesGreen, flashing Data exchange with at least one configured slaveRed Bus control error (possible short circuit or configuration error)Off No data exchange with any of the configured slaves
1. Double click on ‘Setup.exe’.(This file will be executed automat-ically when inserting the supplied software CD-ROM provided that the AutoPlay feature is enabled.)
2. Click ‘Browse’ to select a different installation path, or click ‘Next’ to start the installation process.
3. A progress bar will illustrateprogress of the installation.
4. Finished.Shut down the computer and pro-ceed with the hardware installation steps described on the following pages.
Important:• It is strongly recommended to perform the software installation prior to installing the PCI card into the PC. This
ensures that the software drivers are available when the card is detected by the system.• Administration rights are required when installing the drivers on windows NT, 2000 or XP.• To avoid software conflicts, make sure that no other AnyBus-PCI drivers are installed in the system (e.g. the
2. If present, remove the bracket opposite the PCI slot. Keep the screw for later use.
3. Align the card connector with the slot and press firmly until the card is completely seated
4. Secure the card connector to the chassis using the screw removed earlier
5. Re-attach the system cover and AC power
Warning!Unplug the AC power when adding or removing expansion cards or other system components. Failure to observe this may result in physical injury or damage to computer components.
Important:To ensure trouble-free operation, the front plate of the card must be screwed together with the system cover. The system cover must also be grounded in compliance with local regulations.!
Profibus Interface Details• Optically isolated Profibus RS485 interface• Acyclic communication (DPV1)• Alarm handling (DPV1)• Control up to 125 slaves• Node ID set via fieldbus or by software• Up to 2048 bytes input & output data• 2kB or 4kB DPRAM modes• Extended mode allowing up to 1536 bytes
of I/O to reside in DPRAM
EMC Compliance• Emission: EN 61000-6-4:2001• Immunity: EN 61000-6-2:2001• CE marked
![Everything you ever wanted to know about DPV1 diagnostics ...8452]_2010-_C06... · wanted to know about DPV1 diagnostics … but were afraid to ... Config’ telegram to the ... wanted](https://static.documents.pub/doc/80x56/5a78bd4b7f8b9a273b8e1e96/everything-you-ever-wanted-to-know-about-dpv1-diagnostics-84522010-c06wanted.jpg)
