April 2020
“Advanced machinery telematics”series of express webinarsTopic 8. CAN bus tools
820
48.15
ADVANCED VEHICLE TELEMATICS
CAN j1939 Display J1939 i/o modules
Data converters
CAN bus analyzer-simulator
Contactless FMS gateway
2
CAN bus tools
820
48.15
DAC35 Tool
ADVANCED VEHICLE TELEMATICS
Data converters/ Tasks
3
Crocodile Contactless data reader allows to read the vehicle operation data without any interruption into the vehicle electronical systems integrity.
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting information on:
џ fuel consumption;џ engine operation modes;џ sensors state;џ vehicle diagnostics errors;џ other data transmitted via serial
buses.
“Advanced machinery telematics” series of express webinars CAN bus tools
MasterCAN data converters are used for converting data from CAN J1939 and J1708 buses and creating ready-for-use information for telematics system.
џ Selecting and arranging CAN parameters into messages (PGN) easy to read and process by telematics unit (GPS tracker).
џ Converting data from CAN and J1708 to CAN, RS-232, and RS-485 output messages.
џ Continuous data reading from CAN bus (SAE J1939) and J1708 bus (SAE J1587).
ADVANCED VEHICLE TELEMATICS
Terminal
CAN bus
4
Crocodile Contactless data reader allows to read the vehicle operation data without any
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting
Data converters/ Models
MasterCAN CC
for receiving data from onboard CAN j1939/S6 interface, converting received data and sending created FMS and Telematics messages to CAN j1939/S6 interface.
MasterCAN C 232/485
for receiving data from onboard CAN interface, converting received data and sending created messages to RS-232 Modbus and RS-485 Modbus interfaces.
for receiving data from onboard CAN and J1708 interfaces simultaneously, converting received data and sending created FMS and Telematics messages to CAN j1939/S6 interface and messages to RS-232 Modbus interface.
MasterCAN V-GATE
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
5
Crocodile Contactless data reader allows to read the vehicle operation data without any interruption into the vehicle electronical systems integrity.
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting information on:
џ fuel consumption;џ engine operation modes;џ sensors state;џ vehicle diagnostics errors;џ other data transmitted via serial
buses.
Data converters/ Output messages
MasterCAN with CAN 2.0B output interface transmits FMS messages without changing them and forms Telematics messages:
џ oil level;
џ fuel level;
џ engine torque;
џ instant fuel consumption;
џ oil pressure;
џ coolant level;џ engine speed;
џ trip fuel consumption;
џ engine temperature;
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
џ used fuel;
6
Crocodile Contactless data reader allows to read the vehicle operation data without any interruption into the vehicle electronical systems integrity.
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting information on:
џ fuel consumption;џ engine operation modes;џ sensors state;џ vehicle diagnostics errors;џ other data transmitted via serial
buses.
Data converters/ Features
џ organization of telematic CAN bus with maximum needed dataset;
џ signal reception of analog sensors, their digital conversion and transmitting to the CAN bus;
џ identification of the necessary information inside the CAN bus and its transmitting over interfaces that are available in telematic terminal (analog, RS-232, RS-485).
џ Safe data readout of automobile CAN bus;
џ intelligent combining of several CAN buses;
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
7
Crocodile Contactless data reader allows to read the vehicle operation data without any interruption into the vehicle electronical systems integrity.
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting information on:
џ fuel consumption;џ engine operation modes;џ sensors state;џ vehicle diagnostics errors;џ other data transmitted via serial
buses.
CAN j1939 Display Purpose/ CAN j1939 Display Purpose
MasterCAN Display 35 is designed for visual monitoring of operating parameters of vehicle or stationary object.
MasterCAN Display 35 receives and displays current values of: standard CAN bus, additional sensors by CANj1939/S6 interface and two voltage or frequency inputs.
Сhoice from 3800+ parameters:
џ parameters from additional equipment;
џ fuel level in tank;
џ instant fuel consumption, total fuel consumption;
џ total operating time, operation in optimal and overload engine modes;
џ voltage and condition of electrical equipment.
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
8
Crocodile Contactless data reader allows to read the vehicle operation data without any interruption into the vehicle electronical systems integrity.
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting information on:
џ fuel consumption;џ engine operation modes;џ sensors state;џ vehicle diagnostics errors;џ other data transmitted via serial
buses.
MasterCAN Display 35
MasterCAN Display 35
MasterCAN Display 35
CAN j1939 Display Application/
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
9
Crocodile Contactless data reader allows to read the vehicle operation data without any interruption into the vehicle electronical systems integrity.
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting information on:
џ fuel consumption;џ engine operation modes;џ sensors state;џ vehicle diagnostics errors;џ other data transmitted via serial
buses.
CAN j1939 Display Models/
MasterCAN Display 35 G – “tractor”, 27 pre-configured screens
MasterCAN Display 35 M – “marine”, 37 pre-configured screens
MasterCAN Display 35 U – “universal”, unlimited configuration
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
MasterCAN Display 35 T – “truck”, 26 pre-configured screens
10
Crocodile Contactless data reader allows to read the vehicle operation data without any interruption into the vehicle electronical systems integrity.
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting information on:
џ fuel consumption;џ engine operation modes;џ sensors state;џ vehicle diagnostics errors;џ other data transmitted via serial
buses.
CAN j1939 Display Flexible configuration/
Screen configuration
MasterCAN Display 35 can show up to 21 group, 10 screens in each group, 1 or 2 parameters on each screen.
Configuring Display Options
Each parameter can be assigned a specific name in accordance with the terminology adopted for a particular type of technology or fleet standards. Each parameter can be assigned a unique “icon” – a graphic symbol for quick identification of a parameter.
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
11
Crocodile Contactless data reader allows to read the vehicle operation data without any interruption into the vehicle electronical systems integrity.
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting information on:
џ fuel consumption;џ engine operation modes;џ sensors state;џ vehicle diagnostics errors;џ other data transmitted via serial
buses.
Contactless FMS gateway/ Purpose
Two in one – contactless reader and FMS interface.
Thus, telematics unit configuration is simplified since unnecessary data from the bus is filtered and only use-ful information for vehicle telematics purposes is sent.
FMSCrocodile safely reads CAN bus data without any electrical contact with CAN wires, automatically generates and sends FMS and Telematics messages to its output CAN 2.0B interface (J1939 protocol).
FMSCrocodile is used within for vehicle telematics system as a ready-made solution for safe integration of data from one or more automotive buses into CAN/S6 Telematics Interface.
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
12
Crocodile Contactless data reader allows to read the vehicle operation data without any interruption into the vehicle electronical systems integrity.
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting information on:
џ fuel consumption;џ engine operation modes;џ sensors state;џ vehicle diagnostics errors;џ other data transmitted via serial
buses.
Contactless FMS gateway/ Application #1
CAN
FMS, Telematics
Tracker
aCAN input
Protects CAN bus from active requestsfrom telematics unit
Generates Trip fuel Counter
CAN
Tracker
Liters per hour
Liters ΣCAN input
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
13
Crocodile Contactless data reader allows to read the vehicle operation data without any interruption into the vehicle electronical systems integrity.
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting information on:
џ fuel consumption;џ engine operation modes;џ sensors state;џ vehicle diagnostics errors;џ other data transmitted via serial
buses.
Contactless FMS gateway/ Application #2
CAN
S6
FMS,Telematics
DFM
DUT-EDUT-E
Tracker
FMS
CAN 1 CAN 2Tracker
Sends FMS and Telematics messagesfrom CAN bus to S6 network
Sends FMS messages from two or more CAN buses to on CAN-port of telematics unit
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
CAN input CAN input
14
J1939 i/o modules/ Purpose
MasterCAN DAC – is smart tool for GPS/GLONASS vehicle monitoring systems, where analogue on-board equipment is used along with digital CAN/S6 equipment.
Simultaneous two-way conversion of signal.
Analog signals of standard sensors CAN j1939/S6 messages
ь Dashboard
ь Axle Load Sensorsь Fluid Temperature Sensorsь Oil and hydraulic pressure sensorsь Analog controllersь Attachment Position Sensors
Dь Telematics Online Gateway
ь Vehicle CAN j1939 busesь Vehicle data interfaces
ь Terminal with CAN interfaceь CAN j1939/S6 interface
ь Flow meters with CAN j1939/S6 interfaceь Fuel level sensors with interface
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
15
Crocodile Contactless data reader allows to read the vehicle operation data without any interruption into the vehicle electronical systems integrity.
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting information on:
џ fuel consumption;џ engine operation modes;џ sensors state;џ vehicle diagnostics errors;џ other data transmitted via serial
buses.
ModelConnection to CAN/S6
interfaceAnalog outputs Analog inputs
MasterCAN DAC 15 + 5 1 input/output
MasterCAN DAC 2113 + 13 21
J1939 i/o modules/ Models
MasterCAN DAC 15 MasterCAN DAC 2113
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
16
Crocodile Contactless data reader allows to read the vehicle operation data without any interruption into the vehicle electronical systems integrity.
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting information on:
џ fuel consumption;џ engine operation modes;џ sensors state;џ vehicle diagnostics errors;џ other data transmitted via serial
buses.
CAN bus analyzer-simulator/ Tasks
MasterCAN Tool is a CAN analyzing-imitation tool for reading and automatic parsing of CAN messages and imitation of CAN J1939 messages from various sources (Sas).
џ Monitoring operational status if equipment employing S6 Technology
џ Design, configuration and testing CAN bus telematics equip-ment (SAE J1939 standard for data exchange)
џ CAN message analysis, automatic parsing and storing data logs when connected to standard vehicle CANbus
џ Reading and identification of electronic control units (ECUs) malfunctions (DTC)
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
17
Crocodile Contactless data reader allows to read the vehicle operation data without any interruption into the vehicle electronical systems integrity.
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting information on:
џ fuel consumption;џ engine operation modes;џ sensors state;џ vehicle diagnostics errors;џ other data transmitted via serial
buses.
Контроль функционирования и обслуживание оборудования по Технологии S6
CAN bus analyzer-simulator/ Application #1
Analyzing data of standard vehicle CANbus
EDC ABSECAS
Шина CAN (SAE J1939)
PGN
USB
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
18
Crocodile Contactless data reader allows to read the vehicle operation data without any interruption into the vehicle electronical systems integrity.
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting information on:
џ fuel consumption;џ engine operation modes;џ sensors state;џ vehicle diagnostics errors;џ other data transmitted via serial
buses.
DFM CAN
DFM CAN
DUT-E CAN
DUT-E CAN DUT-E CAN
CANCrocodile
MasterCAN
Driver’s ID Reader
Tracker
CANMonitor
EDC ABS ECAS
CAN (SAE J1939)
PGN
J1939FMSFMS2
TelematicsS6
DTCEvents
USB
CAN bus analyzer-simulator/ Application #2
Condition check and maintenance of S6 Units
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
19
Crocodile Contactless data reader allows to read the vehicle operation data without any interruption into the vehicle electronical systems integrity.
Crocodile is used in GPS/GLONASS vehicle monitoring systems for safe getting information on:
џ fuel consumption;џ engine operation modes;џ sensors state;џ vehicle diagnostics errors;џ other data transmitted via serial
buses.
CAN bus analyzer-simulator/ Advantages
џ Recording values of parameters to a file (logging)
џ Simple, easy and safe connection to CANbus with CANCrocodile contactless reader
џ An option to enable the terminal resistor of CAN bus using software
џ Power supply from USB of PC or vehicle's onboard electrical network
џ Emulation of individual PGN with SPN that can be edited or creation of PGN groups and their
transmission to CAN bus
џ CAN bus load indicator
џ Parsing and displaying PGNs and SPN names and measurement units as text
џ Configurable send/receive data baud rate – 100/125/250/500/1000 kbit/s
џ Displaying current values of parameters (SPN) in decimal and HEX formats
џ Allows selection between 11/29 bit length identifiers during CAN message emulation
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
20
Technoton has a wide product portfolio for working with CAN bus.
ь MasterCAN data converters – converting data from CAN J1939 and J1708 and creating ready-for-use information for telematics system.
ь MasterCAN Display 35 – visual monitoring of parameters of complex machinery. Recognizing 3800+ operation parameters.
ь FMS contactless gateway – “two-in-one” solution for contactless CAN data reading and FMS messages parsing. Safe integration of data from several CAN buses into S6 telematics interface.
ь MasterCAN Tool – automatic SAE J1939 messages parsing imitation of CAN J1939 messages from various sources (Sas).
ь MasterCAN DAC CAN J1939 i/o module – smart device for converting digital and analog signals for vehicle telematics and stationary object monitoring. Simultaneous “digital-to-analog” and “analog-to-digital” data conversion operation is possible.
Summary
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICS
21
“Advanced machinery telematics” series of express webinars CAN bus tools
ADVANCED VEHICLE TELEMATICSLearn more
Official web-pages
More about S6 Technology
More about IoT Burger Technology
Document center
YouTube channel
Follow us in social media
www.jv-technoton.com
rd-technoton.com
rd-technoton.com
www.docs.jv-technoton.com
/c/technotonen
/company/technoton
/technoton