Ap
plic
atio
n n
ote
Save Ballbar 20 data on a network
Overview
There are two ways to save Ballbar data to a network location. One is to manually move the data using the Import / Export function on Ballbar 20, the other is to change the ‘default file path’ for saving data.
It is possible to save Ballbar data to a network location; however, this does not allow the user to run Ballbar 20 software from the network.
To capture data or view data, the Ballbar software must be installed on the PC / laptop being used – Ballbar 20 software cannot be run from the network.
Import / Export (manual method)
The most secure way to save data onto a network PC is to use the ‘Import’ and ‘Export’ function within the Ballbar 20 software to move data to and from the network PC.
Note: It is important that the user exports data immediately after capture to ensure that all data is stored in the order that it was captured.
Using this function will allow the user to:
• Importa‘machinecatalogue’foraspecificmachinefromthenetworktoatestPC/laptop
• Themachinecataloguecaninclude:testparametersforthemachineandprevioustestdata
• Datacanthenbecapturedforthemachineandsavedinthe‘machinecatalogue’
• The‘machinecatalogue’canthenbeexportedfromthetestPC/laptopbacktothenetwork
Detailsforcorrectuseofthisfunctioncanbefoundinthe‘Ballbar20help’bysearching‘Import’.
Import / Export tabs
Change the file path (Automatic method):The alternative is to change the file path for the save location so that every test carried out will automatically be saved to the Network rather than being saved on the test PC / laptop.
All users should be made aware of the following precautions to avoid any data synchronisation issues:
• Onlyasingleusershouldaccessthedataatanytimetoavoidsynchronizationproblems.
• Thenetworkmustbeconnectedatalltimeswhenusingthesoftware(i.e.thereisnodisconnectedmode or local cache).
The following diagrams show the file path for saving data:
Note: The method varies slightly between Windows XP and Vista/7.
For Windows XP:• Select‘Start’>‘ControlPanel’.Atthispoint
the screen below will appear:
• Select‘AddorRemoveprograms’
• Onthenextscreen,findthe‘RenishawBallbar 20’ entry and select ‘Change’
Windows Vista / 7:• Select‘Start’>‘ControlPanel’.Atthispoint
the screen below will appear:
• Select‘Programsandfeatures’
• Onthenextscreen,findthe‘RenishawBallbar 20’ entry and select ‘Change’
For Windows XP:• Select‘Modify’optionandthenselect‘Next’
• Thescreenbelowshouldnowbeshown:The‘DestinationFolder’showsthecurrentlocation where the Ballbar data is stored
• Selectthe‘Browse’tabtochangethesavelocation
• Thescreenbelowwillnowappear:Browseto the new location where data is to be saved and select ‘OK’
• Thescreenabovewillnowbeshowndisplaying the new save location, select ‘Next’ to save the changes
• Alldatawillnowbesavedtothislocation. It will not be saved on the test PC / laptop
Windows Vista / 7:• Select‘Modify’optionandthenselect‘Next’
• Thescreenbelowshouldnowbeshown:The‘DestinationFolder’showsthecurrentlocation where the Ballbar data is stored
• Selectthe‘Browse’tabtochangethesavelocation
• Thescreenbelowwillnowappear:Browseto the new location where data is to be saved and select ‘OK’
• Thescreenabovewillnowbeshowndisplaying the new save location, select ‘Next’ to save the changes
• Alldatawillnowbesavedtothislocation. It will not be saved on the test PC / laptop
This page is intentionally left blank
©2011Renishawplc.Allrightsreserved. RenishawreservestherighttochangespecificationswithoutnoticeRENISHAW®andtheprobeemblemusedintheRENISHAWlogoareregisteredtrademarksofRenishawplcintheUKandothercountries.apply innovation,ProductiveProcessPyramid,ProductiveProcessPatterns,Productivity+,AxiSet,Rengage,TriggerLogic,ToolWise,Sprint,MicroHole,PassiveSeal,SwarfStop,EquatorandVersatilegaugingaretrademarksofRenishawplc.Allotherbrandnamesandproductnamesusedinthisdocumentaretradenames,servicemarks,trademarksorregisteredtrademarksoftheir respective owners.
RENISHAWHASMADECONSIDERABLEEFFORTSTOENSURETHECONTENTOFTHISDOCUMENTISCORRECTATTHEDATEOFPUBLICATIONBUTMAKESNOWARRANTIESORREPRESENTATIONSREGARDINGTHECONTENT.RENISHAWEXCLUDESLIABILITY,HOWSOEVERARISING,FORANYINACCURACIESINTHISDOCUMENT.
Renishaw plc
NewMills,Wotton-under-Edge, Gloucestershire GL128JR United Kingdom
T +44(0)1453524524 F +44(0)1453524901 E [email protected]
www.renishaw.com
Australia
T +61395210922 E [email protected]
Austria
T +432236379790 E [email protected]
Brazil
T +551141952866 E [email protected]
Canada
T +19058280104 E [email protected]
The People’s Republic of China
T +862161806416 E [email protected]
Czech Republic
T +420548216553 E [email protected]
France
T +33164618484 E [email protected]
Germany
T +4971279810 E [email protected]
Hong Kong
T +85227530638 E [email protected]
Hungary
T +3623502183 E [email protected]
India T +918066236000 E [email protected]
Indonesia
T +622125502467 E [email protected]
Israel
T +97249536595 E [email protected]
Italy
T +390119661052 E [email protected]
Japan
T +81353665316 E [email protected]
Malaysia
T +60356314420 E [email protected]
The Netherlands
T +31765431100 E [email protected]
Poland
T +48225771180 E [email protected]
Russia
T +74952311677 E [email protected]
Singapore
T +6568975466 E [email protected]
Slovenia
T +38615272100 E [email protected]
South Korea
T +82221082830 E [email protected]
Spain
T +34936633420 E [email protected]
Sweden
T +46858490880 E [email protected]
Switzerland
T +41554155060 E [email protected]
Taiwan
T +886424733177 E [email protected]
Thailand
T +6627469811 E [email protected]
Turkey
T +902163809240 E [email protected]
UK (Head Office)
T +441453524524 E [email protected]
USA
T +18472869953 E [email protected]
For all other countries
T +441453524524 E [email protected]
Renishaw worldwideAbout RenishawRenishawisanestablishedworld leader in engineering technologies, with a strong history of innovation in product development and manufacturing. Sinceitsformationin1973,thecompanyhassuppliedleading-edge products that increase process productivity, improve productqualityanddelivercost-effective automation solutions.
Aworldwidenetworkofsubsidiarycompanies and distributors provides exceptional service and support for its customers.
Products include:
• Dental CAD/CAM scanning and milling systems.
• Encoder systems for high accuracy linear, angle and rotary position feedback.
• Laser and ballbar systems for performance measurement and calibration of machines.
• Medical devices for neurosurgical applications.
• Probe systems and software for job set-up, tool setting and inspection on CNC machine tools.
• Raman spectroscopy systems for non-destructive material analysis.
• Sensor systems and software for measurement on CMMs (co-ordinate measuring machines).
• Styli for CMM and machine tool probe applications.
*H-8014-1646-01Issued1011Partno.H-8014-1646-01-A