HUAWEI TECHNOLOGIES CO., LTD.
www.huawei.com
Huawei Confidential
23/4/8
英文标题 :40-47pt
副标题 :26-30pt
字体颜色 : 反白内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :35-47pt
字体 : 黑体 副标题 :24-28pt
字体颜色 : 反白字体 : 细黑体
Security Level:INTERNAL
Optical Network Engineering Dept.
Oct. 2007
Application of the Pathloss Software
HUAWEI TECHNOLOGIES CO., LTD. Page 2Huawei Confidential
Contents
Overview
Importing the Data
Pre-Planning Routes
Outputting the Information
HUAWEI TECHNOLOGIES CO., LTD. Page 3Huawei Confidential
Overview Purpose
1. Masters the basic operations of the Pathloss.
2. Pre-plans the microwave routes by using the Pathloss.
Studied Case
Area: Mauritius, which is located in the east longitude and south latitude,
Southern Hemisphere
Basic information of the site:
High- accuracy electronic map (in the Planet_UTM format): 20-new mauritius
mauritius
HUAWEI TECHNOLOGIES CO., LTD. Page 4Huawei Confidential
Overview The Pathloss software is a comprehensive path design tool based on the radio links. The
Pathloss software operates at frequencies ranging from 30 MHz to 100 GHz. Currently, Pathloss 4.0 is commonly used.
Generally, electronic maps in three formats are used for the Pathloss software. They are described as follows:
1. Electronic map released with the software The accuracy of this map is 900 meters. The map is carried in two disks as follows: Disk 1-map covering the North and South America Disk 2-map covering the Europe, Africa and Asia 2. Electronic map in the SRTM format This kind of map is classified into the following three categories: SRTM 1': The accuracy of this map is 30 meters. Only the electronic map covering part of
the North America is available. SRTM 3':The accuracy of this map is 90 meters. The high-accuracy electronic map
covering the entire globe is available. It is commonly used. SRTM 30': The accuracy of this map is 900 meters. The high-accuracy electronic map
covering the entire globe is available. 3. Electronic map in the Planet_UTM format This kind of map has high accuracy, which ranges from several meters to tens of meters.
You can obtain it form the Radio Network Planning Dept.
HUAWEI TECHNOLOGIES CO., LTD. Page 5Huawei Confidential
OverviewFour versions of the Pathloss Software
PL4B: basic design software for microwave transmission
PL4C: basic design software for microwave transmission + coverage
calculation
PL4I: basic design software for microwave transmission + interference
analysis
PL4CI: basic design software for microwave transmission + coverage
calculation + interference analysis
HUAWEI TECHNOLOGIES CO., LTD. Page 6Huawei Confidential
Overview
Requirements for Installing the Pathloss Software The computer should be of the Pentium series, and should run in the
Windows 95/98 (or a later version) or Windows NT 4.0 (or a later version)
operating system.
The Pathloss software (with few database engines) requires a minimum of 6-
Mbyte hard disk space. More database engines and various data files will
increase the requirement for the hard disk space to 25 Mbytes.
A memory with a capacity of more than 64 Mbytes is required when the
computer runs in the Windows 95/98 operating system, or a memory with a
capacity of more than 128 Mbytes is required when the computer runs in the
Windows NE operating system.
The authentication of license (in a floppy disk or in a dongle) is required.
You can obtain these contents at the website of CTE: www.pathloss.com
HUAWEI TECHNOLOGIES CO., LTD. Page 7Huawei Confidential
OverviewUninstallation of the PathlossLicense in a floppy disk:
Choose Configure > Program > Uninitialize Program from the menu in the Pathloss.
Click Start, and select Control Panel. In the displayed window, choose Add or Remove Programs >
Change or Remove Programs > Pathloss 4.0.
License in a USB
Click Start, and select Control Panel. In the displayed window, choose Add or Remove Programs >
Change or Remove Programs > Pathloss 4.0.
HUAWEI TECHNOLOGIES CO., LTD. Page 8Huawei Confidential
Contents
Overview
Importing the Data
Pre-Planning Routes
Outputting the Information
HUAWEI TECHNOLOGIES CO., LTD. Page 9Huawei Confidential
Importing the Data Processing the Data
Importing the Electronic Map1. Importing the electronic map released with the software Click Start, and choose Program > Pathloss 4.0 to run the software. Choose Configure > Terrain Database from the menu of the Pathloss. (In the displayed dialog box,
according to the format of the map released with the software, GTopo30 Global 30 sec under Primary is generally selected.)
mauritius
HUAWEI TECHNOLOGIES CO., LTD. Page 10Huawei Confidential
Importing the Data Click Setup Primary, and then click Set Directory in the Gtopo30 Global 30 sec dialog box to set the directory that
contains the information of the map to be used in the network planning. When the directory setting is complete, click OK.
Click Close in the GTopo30 Global 30 sec dialog box, and then click OK in the Configure Terrain Database dialog box.
HUAWEI TECHNOLOGIES CO., LTD. Page 11Huawei Confidential
Importing the Data2. Importing the electronic map in the SRTM format
Run the Pathloss software, and choose Configure > Terrain Database from the menu of the
Pathloss. In the displayed dialog box, select SRTM under Primary.
Click Setup Primary, and the SRTM window is displayed. Choose Files > BIL-HDR-BLW to select the
proper map (in the format of *.hgt).
HUAWEI TECHNOLOGIES CO., LTD. Page 12Huawei Confidential
Importing the Data3. Importing the electronic map in the Planet_UTM format Run the Pathloss software, and choose Configure > Geographic Defaults from the menu of the
Pathloss. In the displayed Geographic Defaults dialog box, modify the values in Datum and Ellipsoid to the formats specified in the Projection file. Select the proper items under Latitude, Longitude and Use as required. Under Grid Coordinate System, select Universal Transverse Mercator (UTM). Modify other items according to the actual situation. (In the studied case, Mauritius is located in the east longitude and south latitude, Southern Hemisphere.)
HUAWEI TECHNOLOGIES CO., LTD. Page 13Huawei Confidential
Importing the DataDescriptions of the options:
1. Datum: You should make a selection in the drop-down list after Datum if Datum is selected. Select the proper item in the drop-down list after Datum, according to the attribute of the map that is used.
2. Ellipsoid: You should make a selection in the drop-down list after Ellipsoid if Ellipsoid is selected. Select the proper item in the drop-down list after Ellipsoid, according to the attribute of the map that is used.
3. Longitude
4. Latitude
5. Use: Select Datum or Ellipsoid.
6. Grid Coordinate System: Generally, Universal Transverse Mercator (UTM) is selected.
7. Seconds Format: Generally, Nearest 0.01 Second is selected. (This item does not affect the calculation and the final result.)
8. Allow Non Standard UTM Zones
HUAWEI TECHNOLOGIES CO., LTD. Page 14Huawei Confidential
Importing the Data
The Pathloss software supports various ellipsoid definitions and projection modes.
Projection modes: Approximately 10 projection modes, such as UTM, Gausss Kruger, Gauss Conformal (south Africa), New Zealand Gird, are supported.
Ellipsoid definitions: More than 100 ellipsoid definitions, such as WGS1984, WGS1972, GRS80, Voirol1960, Massawa, Airy1983, and Mahe19871, are supported.
HUAWEI TECHNOLOGIES CO., LTD. Page 15Huawei Confidential
Importing the Data
The maps used in the radio network planning all adopt the UTM projection mode.
The basic contents of the UTM are as follows: heights, clutter, vectors.The projection.txt file in the heights folder includes the information of the digital map, such as the ellipsoid, time zone, projection mode and range. For exampleGRS-1980: ellipsoid definition 29: time zone information of the digital map, that is, Time Zone 29 UTM: projection mode of the map0.0-9.0 500000.0 0.0: range of the map
The maps used in the radio network planning mostly adopt the ellipsoid definitions WGS1984 and GRS1980, and the UTM projection mode.
HUAWEI TECHNOLOGIES CO., LTD. Page 16Huawei Confidential
Importing the Data
The map projection can exhibit the curved earth surface on a flat surface by using the specific mathematics method, according to a certain algorithm, and thus establish mapping relations between the points on the earth surface and the points on the flat surface. When the ellipsoid of the earth is projected on a flat surface, the distortion will occur. According to the shape of the projection plane, the map projection is classified into azimuth projection, cylindrical projection, and conical projection. According to the projection distortion property, the map projection is classified into conformal projection, equivalent projection, and equidistant projection.
Map Projection
As the internal substances of the earth are distributed unevenly and the earth surface rolls, the datum cannot be used as the calculation plane of the measurement result. In this case, a rotating ellipsoid that is similar to the earth is usually selected and is expressed in the mathematical way to replace the datum. The ellipsoid is the basis for measurement and map drawing. The rotating ellipsoid that is in best accordance with the datum of the local area (a nation or several nations) is called the reference ellipsoids, such as GRS80, Krassovsky, and WGS84.
Reference Ellipsoid
HUAWEI TECHNOLOGIES CO., LTD. Page 17Huawei Confidential
Importing the DataUniversal Transverse Mercator (UTM)
UTM projection is a conformal, secant, and cylindrical projection. The cylinder intersects the
earth at the two circles of equal altitudes: south altitude 80 degrees and north altitude 84
degrees. After the projection, distortion does not occur to the two intersected longitudes. The
ratio of the two longitudes to the central meridian is 0.9996. The UTM projection is created for
the world war. In 1948, the U.S.A completed the calculation of this universe projection
system. The projection azimuth is not distorted, the central meridian is a straight line and is
the symmetry axis of the projection.
In UTM, earth is divided into 60 zones limited by west longitude 180 degrees, spanning six
degrees of longitude each from the west to the east. UTM is a widely used projection mode.
The satellite image of China often adopts the UTM projection mode.
HUAWEI TECHNOLOGIES CO., LTD. Page 18Huawei Confidential
Importing the Data Choose Configure > Terrain Database from the menu of the Pathloss. In the displayed Configure Terrain Database dialog box, select Odyssey - UTM under Primary.
HUAWEI TECHNOLOGIES CO., LTD. Page 19Huawei Confidential
Importing the Data Click Setup Primary. In the displayed Odyssey - UTM dialog box, select Use special UTM zone, and enter the time zone
number plus N or S in the box. ("N" represents the Northern Hemisphere, and "S" represents the Southern Hemisphere. If you do not enter N or S, it is set to N by default. In the case of Mauritius, you should enter 40S.) If the map contains the information of buildings, select Embedded building data. If the map covers regions that are located in several time zones, you can select Use standard UTM zones in index.
HUAWEI TECHNOLOGIES CO., LTD. Page 20Huawei Confidential
Importing the DataDescriptions of the options: 1. Use standard UTM zones in index: When the map covers regions that are
located in several time zones, you should select this item.2. Use specified index file: When the time zone file is available, you can select
this item. In this case, you should specify the index file that contains the data of the time zone.
3. Use specified UTM zone: When you select this item, enter the accurate time zone number and the letter that indicates the hemisphere where the region is located, for example, 40S
4. Embedded building data: When the map contains the information of buildings, select this item. When the planned links are located in cities, this item has a great impact.
HUAWEI TECHNOLOGIES CO., LTD. Page 21Huawei Confidential
Importing the Data Click Set Directory to specify the directory of the map. In the example, the path is as follows: D:\
Microwave Planning Design Software Training\20-new Mauritius\height. Note that you should select the
Heights folder in the directory of the digital map. Click Index, and choose Files > Import List in the
displayed Odyssey - UTM window. The Define Fields dialog box is displayed as follows:
HUAWEI TECHNOLOGIES CO., LTD. Page 22Huawei Confidential
Importing the Data Click Planet, and the format of the imported data is changed to Planet. In UTM zone, enter the time
zone number plus N or S. Then click OK, select the Index.txt file, and click OK. The map information
list is imported. Choose Files > Close in the Odyssey - UTM window. Click Close and then click OK. Descriptions of the preceding parameters:
Edge units: generally expressed in meters
Byte order: SPARC or INTEL
Bottom up: This item determines whether the map starts from the southwestern corner or from the
northwestern corner. If the imported map is upside down, you need to adjust this item.
HUAWEI TECHNOLOGIES CO., LTD. Page 23Huawei Confidential
Importing the Data Importing the Data in the Format of CSV
Importing the data of a single layer
Choose Module > Network > Site Data > Site List > Import > Site Text File from the menu of the Pathloss, and the Import Text File
dialog box is displayed.
After you determine the related items in the Import Text File dialog box, click Import. Select the data to be imported (final data format: *.CSV), click Open, and then click Import. Click Close when the process is complete.
HUAWEI TECHNOLOGIES CO., LTD. Page 24Huawei Confidential
Importing the Data Choose Files > Save (in the format of *.gr4) > Site Data > Create Background. The background
file is created.
HUAWEI TECHNOLOGIES CO., LTD. Page 25Huawei Confidential
Importing the Data The background files may not be created when the Pathloss is used.
The possible causes are as follows:
1. The table heading in the saved *.CSV file is not deleted.
2. The path of the map is incorrectly set.
3. The geographical location is incorrectly set.
4. The file is not saved as required, that is, you should choose Files >
Save to save the file in the format of *.gr4.
HUAWEI TECHNOLOGIES CO., LTD. Page 26Huawei Confidential
Importing the DataImporting the data of multiple layers
Click Start, and choose Program > Pathloss 4.0 to run the software. Choose Module > Network > Configure > Terrain Database, and the
Configure Terrain Database dialog box is displayed. Setting the layers: Select Layers to determine the layer where the site is
located, and then click OK. Modifying the legends of sites in batches: Choose Defaults > Site
Legend. Choose Site Data > Site List > Import > Site Text File, and the Import
Text File dialog box is displayed. After you set the attributes of the site in the dialog box, click Import to select the data to be imported (in the format of *.CSV). Click Import, and then click Close when the process is complete.
HUAWEI TECHNOLOGIES CO., LTD. Page 27Huawei Confidential
Contents
Overview
Importing the Data
Pre-Planning Routes
Outputting the Information
HUAWEI TECHNOLOGIES CO., LTD. Page 28Huawei Confidential
Pre-Planning Routes1. Read through the contents on network, transmission and line construction in the
tender document and digest these contents. Sort out the required information. 2. If the clauses that are required for the network planning but are not specified in the
tender document, communicate with the operator and clarify the doubts. 3. Fully understand the bidding strategies of the project team. 4. Determine the required conditions for pre-planning the microwave transmission
routes, based on the requirements of the tender document, the conclusion reached after the communication with the project team, and the output of the radio network planning. These required conditions are described as follows:
Bidding strategies of the project team KPIs Transmission modes of the backbone network (network between cities) Selected microwave products Maximum antenna heights Adopted protection modes
HUAWEI TECHNOLOGIES CO., LTD. Page 29Huawei Confidential
Pre-Planning Routes Risk factor of the microwave BOQ Frequencies Geographical location of the nation, that is, the hemisphere, longitude, and latitude
where the nation is located. Location of each BTS and the requirement of each BTS for the transmission capacity Location of each BSC and the requirement of each BSC for the transmission capacity Subordinating relations between BSCs and BTSs 5. When the Pathloss software is used to pre-plan the microwave transmission routes, the
following aspects are involved: Divide the work of personnel involved in the project microwave planning and design and
making out the plan. Produce the project-level microwave transmission distance calculation table. Determine the graphic example of the project-level microwave planning and design and
outputting the format. Determine the microwave network topology to design the network at different layers,
that is, backbone layer, convergence layer, and access layer. Increase the distance of routes in the SDH backbone network to a proper length to decrease the number of SDH microwave hops, choosing curved profiles, and capitalizing on the local terrain condition.
HUAWEI TECHNOLOGIES CO., LTD. Page 30Huawei Confidential
Pre-Planning Routes Network Configuration
SDH (large-capacity microwave: STM-1)
PDH (small-capacity microwave: 4xE1, 8xE1, 16xE1)
4xE14xE14xE14xE1 4xE14xE14xE14xE1
2xE2xE112xE2xE11
4xE1
4xE14x
E1
4xE1
8xE1
16xE1
1E11E11E11E1
4xE1
1+1BSC
1xE11xE11xE11xE12xE12xE12xE12xE1
1xE11xE11xE11xE1
2xE12xE12xE12xE1
HUAWEI TECHNOLOGIES CO., LTD. Page 31Huawei Confidential
Pre-Planning RoutesConnecting the BSC at the root node to the nearest site
Start
Check if there is the site with no link configured
YES
NO
Click on the connection line
Terrain Data
Operations
Generate Profile
Close
Module
Antenna Heights
Calculate to adjust the antenna heights at two ends
Check if the line-of-sight Transmissions Between two sites
is available
Adding a Relay Site
YES
NO
Network
YES
END
Flow chart 1
(1)
HUAWEI TECHNOLOGIES CO., LTD. Page 32Huawei Confidential
Pre-Planning Routes
Procedures for Configuring a Link
Connect the BSC to a nearest site, and click on the connection line. Choose Terrain Data > Operations > Generate Profile.
In the displayed Generate Profile dialog box, click Generate and then click Close. Choose Module > Antenna Heights, and click Calculate (check if the line-of-sight transmission between the two sites is available).
Choose Module > Network, and then click Yes.
HUAWEI TECHNOLOGIES CO., LTD. Page 33Huawei Confidential
Pre-Planning Routes Drag the mouse to connect Site38 and Site40. Click on the connection line, and select
Summary. Based on the data in Calculated Distance (km), enter the proper value in Frequency. This hop of link adopts the central frequency point 12996 MHz of the 13 GHz frequency band.
HUAWEI TECHNOLOGIES CO., LTD. Page 34Huawei Confidential
Pre-Planning Routes Choose Module > Terrain Data > Operations > Generate Profile.
HUAWEI TECHNOLOGIES CO., LTD. Page 35Huawei Confidential
Pre-Planning Routes Click Generate in the Generate Profile dialog box, and then click Close. Double-
click the blank area under Structure, and then select Range of Structures. Set the height of the structure (in the example, a tree of 15 meters).
Select any point on the profile, and you can modify the related parameters, for
example, distance, elevation, structure, scale and ground.
HUAWEI TECHNOLOGIES CO., LTD. Page 36Huawei Confidential
Pre-Planning Routes Choose Module > Antenna Heights, and then click .
HUAWEI TECHNOLOGIES CO., LTD. Page 37Huawei Confidential
Pre-Planning Routes Choose Module > Print Profile.
18 07十月
Site38
Latitude 20 11 15.36 SLongitude 057 43 03.36 EAzimuth 298.90Elevation 40 m ASLAntenna CL 28.5 m AGL
Site40
Latitude 20 08 52.08 SLongitude 057 38 28.68 EAzimuth 118.93Elevation 170 m ASLAntenna CL 29.8 m AGL
Frequency (MHz) = 12996.0K = 1.33, 0.67
%F1 = 100.00, 60.00
Path length (9.11 km)
0 1 2 3 4 5 6 7 8 9
Ele
vation (
m)
20
40
60
80
100
120
140
160
180
200
220
HUAWEI TECHNOLOGIES CO., LTD. Page 38Huawei Confidential
Pre-Planning RoutesOperations for the Sites Between Which the Line-of-Sight Transmission Is not Available: Adding a Relay Site
Site Data
Add Site
Click on the locationof the relay site to be
added
Add Site
Enter the name ofthe relay site
OK
Determine thelocation of the relay
site to be added
Flow chart 1-(1)
Flow chart 2Flow chart 2
Flow chart 2
HUAWEI TECHNOLOGIES CO., LTD. Page 39Huawei Confidential
Pre-Planning Routes Deleting a Relay Site
Choose Site Data > Site List, and select the site to be deleted. Choose Edit > Delete
> Import > Close.
Labeling a Link
Labeling a link by default (labeling the site distance only)
Right-click on a link and select Label, and the Label dialog box is displayed. Select
Distance, and deselect Do not draw. Enter the information of the link in the blank of
the dialog box. You can also adjust the font size and position of the characters. After
the process is complete, click OK.
Labeling a link in a customized way (labeling any information on the link)
Right-click on a link and select Label, and the Label dialog box is displayed. Deselect
Do not draw. Enter the information of the link in the blank of the dialog box. You can
also adjust the font size and position of the characters. After the process is complete,
click OK.
HUAWEI TECHNOLOGIES CO., LTD. Page 40Huawei Confidential
Pre-Planning Routes Labeling a Link by Default (Labeling the Site Distance Only)
HUAWEI TECHNOLOGIES CO., LTD. Page 41Huawei Confidential
Pre-Planning Routes Labeling a Link in a Customized Way (Labeling Any Information on the Link)
HUAWEI TECHNOLOGIES CO., LTD. Page 42Huawei Confidential
Contents
Overview
Importing the Data
Pre-Planning Routes
Outputting the Information
HUAWEI TECHNOLOGIES CO., LTD. Page 43Huawei Confidential
Outputting the Information
Outputting the networking diagram as a PDF document
Outputting the networking diagram as a PDF document
Outputting the antenna height
and site distance
Outputting the antenna height
and site distance
Outputting the profile diagram between sites
Outputting the profile diagram between sites
Outputting the terrain diagram
Outputting the terrain diagram
HUAWEI TECHNOLOGIES CO., LTD. Page 44Huawei Confidential
Outputting the Information Choose Module > Network > Print > Copy from the menu of the Pathloss.
Paste the terrain diagram in the Word and save it in the format of *.doc.
HUAWEI TECHNOLOGIES CO., LTD. Page 45Huawei Confidential
Outputting the Information Outputting the Profile Diagram of a Single Link Click on the link whose profile diagram is to be output between two sites, and choose
Terrain Data > Module > Print Profile > Print > Copy from the menu of the Pathloss. Paste the profile diagram in the Word and save it in the format of *.doc.
18 07十月
Site38
Latitude 20 11 15.36 SLongitude 057 43 03.36 EAzimuth 298.90Elevation 40 m ASLAntenna CL 28.5 m AGL
Site40
Latitude 20 08 52.08 SLongitude 057 38 28.68 EAzimuth 118.93Elevation 170 m ASLAntenna CL 29.8 m AGL
Frequency (MHz) = 12996.0K = 1.33, 0.67
%F1 = 100.00, 60.00
Path length (9.11 km)
0 1 2 3 4 5 6 7 8 9
Ele
vation (
m)
20
40
60
80
100
120
140
160
180
200
220
HUAWEI TECHNOLOGIES CO., LTD. Page 46Huawei Confidential
Outputting the Information Outputting the Profile Diagrams of Multiple Links in Batches Two software programs should be installed: Adobe Acrobat 5.0 and pdfprinter. Double-click Pathloss 4.0. Choose Module > Print Profile > Batch Print, and then
click on a certain link. Press Ctrl+A to select all links, and then click Open. Enter the names of these files, and save them in the format of *.PDF. (The number of files is determined by the number of links. In this case, the PDF documents containing the profile diagrams are generated in batches.)
Double-click on a certain link whose PDF document containing the profile diagram was created previously. Select the PDF document, and select and insert all the other created PDF documents containing the profile diagrams of other links. Click OK. In this way, you can combine multiple PDF documents into one PDF document.
HUAWEI TECHNOLOGIES CO., LTD. Page 47Huawei Confidential
Outputting the Information Outputting the Antenna Height and Site Distance Choose Site Data > Site List > Reports > CSV link list-microwave. Select the site information to be output, and then
click OK. In this case, the report is saved as a CSV file. You should open it in the Excel and save it in the format of *xls.
HUAWEI TECHNOLOGIES CO., LTD. Page 48Huawei Confidential
Outputting the Information
HUAWEI TECHNOLOGIES CO., LTD. Page 49Huawei Confidential
Outputting the Information The networking diagram is output as a PDF document. Do as follows: Click Printer
Setup, and select Acrobat PDFWrite in the Printer Setup dialog box. Set the size of the paper, and then click Properties.
HUAWEI TECHNOLOGIES CO., LTD. Page 50Huawei Confidential
Outputting the Information
HUAWEI TECHNOLOGIES CO., LTD. Page 51Huawei Confidential
Outputting the Information Choose Print > Print to save the file in the format of *.pdf, and then click Save.
Thank youwww.huawei.com