• 6000 Series SHURLOK® Adapter Mount Roller Bearing
• Rexnord Couplings
POWER GENERATION
Applied Industrial Technologies and Rexnord Industries, LLCReliable Solutions for Power Generation Applications
Authorized distributor:
Products of:
2 To place an order, call Applied Industrial Technologies at 1-877-279-2799 or visit Applied.com To place an order, call Applied Industrial Technologies at 1-877-279-2799 or visit Applied.com
6000 Series SHURLOK® Adapter Mount Roller Bearing
Applied Industrial Technologies
Typical Power Generation Applications• Tail Pulley / Head Pulleys• Fans
ZA 6000 Series Shaft sizes range from 1-15/16” to 3-15/16”
Available Options:• Auxiliary End Caps (open and closed options) – Protect your operation against
contamination in even the harshest environments• Seals
K Seal – Light contact, single lipM Seal – Heavy contact, spring loaded lip seal to keep out fine coal dustViton® M Seal – For higher temperature and chemical resistance
• High temperature options including additional internal clearance, steel retainers and greases Auxiliary End Caps
Self-aligning spherical roller bearing provides 3 degrees of static and dynamic misalignment
Roller elements machined to best-in-class tolerance provides longer bearing life
Super-finished raceways provide a cool running, quiet, high speed and high-load capacity bearing
Three field interchangeable seal options suit many diverse applications
Rugged, one-piece housing decreases installation/removal time by 80% versus SAF models
Factory pre-set clearances reduce installation time significantly
Factory pre-lubricated elements require 80% less lubrication than SAF models – ISO 14000 friendly!
Hardened Adapter Inner Ring resists fracture under shock and heavy loads
Spyglass® Optical Strain Sensor provides error-free installation
Positive Locking System provides easy installation and removal, even for undersized shafts
Applied Industrial Technologies helps the Power Generation Industry increase operational efficiency and profitability with high-quality Rexnord® products – including the innovative 6000 Series SHURLOK® Adapter Mount Roller Bearing and a complete selection of Rexnord® Couplings.
You can trust that these products are backed by trained Applied® associates who can assist you locally from more than 400 Applied® locations. For product selection and support, contact us at 1-877-279-2799 or visit us online at Applied.com.
Your Trusted Source for Rugged, Reliable Rexnord® Products
ZAF 6000 Series Shaft sizes range from 2-7/16” to 4-15/16”
To place an order, call Applied Industrial Technologies at 1-877-279-2799 or visit Applied.com To place an order, call Applied Industrial Technologies at 1-877-279-2799 or visit Applied.com 3
Rexnord® Couplings
Rexnord® Thomas® Disc Coupling 54RDG• For material handling and boiler feed
pump applications• High torque density• Non-lubricated• Suitable replacement for gear and grid
couplings
Falk™ Orange Peel® Shaft Guards • Recommended for use with all
Rexnord coupling applications• OSHA compliant• Economical• Large variety of shapes and sizes
Rexnord® Thomas® CMR Disc Coupling • For compressor applications• High torque density• Non-lubricated• Ease of installation and replacement
Falk™ Wrapflex® Elastomeric Coupling• For pump applications• High misalignment capabilities• Non-lubricated• Replace-in-place elements• Torsionally flexible
Rexnord® Omega® Coupling • For pump applications• High misalignment capabilities• Non-lubricated• Replace-in-place elements• Torsionally flexible
Rexnord® Thomas® Disc Coupling Series 71• For material handling, boiler feed
pumps, and FD and ID fan applications• High torque density• Non-lubricated• Ease of installation and replacement
Rexnord® Addax® Composite Coupling• For cooling tower applications• Lightweight• High misalignment tolerance• Corrosion resistant
Falk™ Steelflex® Grid Coupling• For pulverizer applications• Long-life lubrication• Ease of replacement• Torsionally flexible
Call 1-877-279-2799 or visit us online at Applied.com
Rexnord® Couplings are designed and manufactured in several styles to suit different applications throughout power generation plants. Whether you need more flexibility, lower maintenance, high torque load protection, simple cost-effective performance or something else, our full selection of Rexnord® couplings can make the critical difference in your operation.
Accessory:
Strategic PartnershipsApplied Industrial Technologies has teamed with Rexnord
Industries, LLC to deliver world-class power transmission
products and innovative solutions that
keep your power generation plant
operating efficiently and profitably.
Products, Services and ExpertiseAnd, if you need other industrial
components and solutions,
Applied® carries a complete stock of
maintenance repair items, including
industrial rubber products, fluid
power components, bearings, linear
components, power transmission
components, specialty maintenance
and mill supplies. In addition, Applied®
provides engineering, design and
systems integration for industrial and
fluid power applications, as well as
customized mechanical, fabricated
rubber and fluid power shop services.
Our network of more than 400
locations ensures that the part you
need is always close by.
Applied® keeps you by delivering the
products, services and expertise – when you need them
the most – to make you more productive and give you
the competitive edge.
Applied® distribution centers
Applied® service centers
Authorized distributor:Contact Your Local Applied® Service Center
1-877-279-2799
© 2008 Applied Industrial Technologies, Inc. All Rights Reserved. IN-1007-15-4225
WARNING: Injury, death, property damage,
and/or equipment failure may result from
the misuse or misapplication of the products
featured in this publication. The information in
this publication is provided “AS IS,” WITHOUT
ANy WARRANTy OF THE INFORMATION’S
ACCURACy OR THE PRODUCTS’ SUITABILITy
FOR ANy PARTICULAR USE.
Corporate Headquarters
1 Applied Plaza
Cleveland, Ohio 44115
Toll Free Phone: 1-877-279-2799
Applied.com
