APPROACH THRESHOLD & END LIGHT–HALOGEN
VAS APL-1 VAS REN-1 VAS APS-1 VAS RTL-1VAS RWB-1
High Intensity Runway Edge Light –Halogen Compliance with Standards: FAA AC 150/5345-46EICAO Annex 14: In full compliance with figs. A2-1, A2-2, A2-3,A2-4, A2-8 for use in Category I, II and III on runwaysIS : In full compliance with IS Specifications IS 7785 Part – I to Vand IS:1913-1969
• Powder coated Aluminum alloy body, light weight, corrosion-resistant
• Dual Glass covers can withstand cold and heat fusion without breaking to withstand blowing dust, heavy rain and snow
• Par lamp is available as option
• Lamp inside the light fitting is clamped by moving the stainless steel spring wire for quick replacement.
• Optimize design for frangible coupling in order to ensure flight safety.
• Secondary lead is inside the light fitting body to ensure safety
• Lamp life is greater than 1000 hours at 6.6A
• 5-step constant current operation
• Average light intensity: >10000 (cd)
• Main beam rang Horizontal 360°
Features ƒ
The VASH alogen fixture used aas Precision Approach Lighting Category I, II, III, white, end red, Threshold and Threshold Wingbar Lighting Category I, II, III and Runway End Lighting.
Applications
www.vardhmanairports.com
• Environmental Temperature : -25 Degree – +55 Degree
• Lights can withstand wind pressure of 370Km/h
The Environmental Condition
• Suitable for use in 6.6A airfield lighting circuits normally supplied from 200/150/100 watt Isolating transformer.
• Fitting can work with existing AFL Runway Circuit having 200/150/100 watt transformers .
Electrical supply
• Relative Humiduty range- 10% to 95% at 55 Degree ambiant temperature
1st & 2nd Floor, Plot No.13/c & 13/3, Rama Road Side, Industrial Area, Najafgarh
Road , Delhi-110015, India+91-9818295444 I F: +91-11-45710588 www.vardhmanairports.com
ISO 9001:2015 Certified Company CIN U62100DL 2014PTC263759
• 200 W /150 W/100W Halogen / 6.6 Amp
Power consumption
• Weight -4 kg
• Carton size 120mm (w) x 120mm
Packaging dataItem No. Parts Name Remarks
1 Front cover Aluminium Alloy
2 Filter (Red, Green, White) Glass with coating
3 Body Aluminium Alloy
4 Seal ring and Gasket Silicone Rubber
5 Halogen Lamp (PK30D) 200 W/150 W/100W - 6.6 Amps
6 Halogen Lamp (PAR ) 200W- 6.6 Amps (Optional)
7 Back Cover Aluminium Alloy
8 Lens Holder Aluminium Alloy
9 Filter Type Clear/Red/Green (as required)
10 Frangible Coupling Cast Aluminium
11 Filter Frame Aluminum Alloy
12 Frangible Coupling V1 Cast Aluminium (Connecting Base Plate)
13 Frangible Coupling V2 Cast Aluminium (connecting Pole)
14 Base Plate Cast Aluminium 300 Dia
• • • Clear Green Red
Lense Options:
The VAS RAL-1 Approach Light can be installed on a transformer housing box having size on 300MM DIA and 450MM Height or mounted on a pole
Elevated Installation Methord
Typical Installation Method
Table
Color Type Average Intensity(cd)
White Approch centerline & crossbars >20000
Green Threshold >10000
Red Runway End >2500
Red Approach side row >5000
Green Threshod Wing Bar >10000
150W/200W
200W
100W/150W/200W
200W
200W
Front View
Tungsten Halogen Lamp
Ø 300
355
V2/V1
Ø 300
6-Ø10
Ø300
45°
ISOLATION TRANSFORMER
2" CONDUIT ENTRANCE
OPTIONAL GROUNDING
BASE PLATE
CONNECTOR KIT
FRANGIBLE
COUPLING
FRONT
VIEW
SIDE
VIEW
MAST1000
4200
1000 1000 1000
150800
1200
100100
950
Photometric ChartRunway Approach Light
Minimum Average =22500
200W
Minimum Average =20300
DegreesVertical
Y
20
16.5
14.513.5
108
5
2.51.5
0
Minimum=1000
Minimum=2000
Main Beam=10000
Main BeamMinimum=1000
Main BeamMinimum=2000Main BeamMinimum=10000
-15 -14 -10-20 -5 0 5 Degrees
Horizontal
X
DegreesVertical
Y
20
16.5
14.513.5
108
5
2.51.5
0
Minimum=1000
Minimum=2000
Main Beam=10000
Main BeamMinimum=1000
Main BeamMinimum=2000Main BeamMinimum=10000
10 14 15 20
150W
-20 -15 -14 -10 -5 0 5 Degrees
Horizontal
X10 14 15 20
0.250
X
10
9
7.5
54.75
-10 -9 -7.5 -6 -5 0 1097.565
Minimum = 125
Main BeamMinimum = 1250
Minimum = 250
Minimum = 125
Minimum = 250
Main BeamMinimum = 1250
Minimum Average=3520
100W
Y
X
0.250
10
9
7.5
5
-10 -9 -7.5 -6 -5 0 1097.565
Minimum = 125
Main BeamMinimum = 1250
Minimum = 250
Minimum = 125
Minimum = 250
Main BeamMinimum = 1250
Miinniimmuumm Average = 4100
150W
Runway End Light
Y
X
0.250
10
9
7.5
5
-10 -9 -7.5 -6 -5 0 1097.565
Minimum = 125
Main BeamMinimum = 1250
Minimum = 250
Minimum = 125
Minimum =250
Main BeamMinimum = 1250
Miinniimmuumm Average = 4770
200W
Y
DegreesVertical
DegreeHorizontal
Y
0
X
1514.5
12.511.5
10
5
1.50.5
-20 -16.5-15 -11.5-10 -7 -5 0 5 7 10 11.5 15 16.5 20
Minimum = 250
Main BeamMinimum = 500
Main BeamMinimum = 2500
Main BeamMinimum = 250
Minimum =500
Main Beam = 2500
Miinniimmum Average = 5500
200W
Runway End Light Runway Approach Siderow Light
DegreesVertical
DegreeHorizontal
Y
0
X
1514
11.5
10
1
-15 -10 -9-7.5-5.5 -5 0 155 5.5 7.5 9 10
Minimum = 500
Main BeamMinimum = 1000
Main BeamMinimum = 5000
Main BeamMinimum = 500
Minimum = 1000
Main Beam= 5000
Minimum Average =10450
200W -16.5 -15 -11.5-10 -7 -5 0 5 7 10 11.5 15 16.500.5
5
1010.511.5
13.5
15
Minimum =500
Main Beam Minimum = 1000 Main Beam Minimum = 5000
Main Beam Minimum = 500
Minimum =1000
Main Beam = 5000
Minimum Average =10600
200W
Runway End Light Runway Approach Siderow Light
DegreesVertical
Y
1st & 2nd Floor, Plot No.13/c & 13/3, Rama Road Side, Industrial Area, Najafgarh
Road , Delhi-110015, India+91-9818295444 I F: +91-11-45710588 www.vardhmanairports.com
ISO 9001:2015 Certified Company CIN U62100DL 2014PTC263759