April 2017 New Holland U.S. Program...

April 2017 New Holland U.S. Program Index Page

Greetings – Beth Rider 3 U.S. Matrix Hay and Forage Major Products 4

Hay and Forage Supporting Products 5

Boomer™ Series, WORKMASTER™ Series 6

Light Construction 7

TK, T4000 F/V, T4 F/V, PowerStar™, T4, T5, TS6, T6 Series, Telehandlers 8

Combines 9

T7, T8, T9 Series 10

SP Sprayers, Planting, Seeding, Tillage 11

Partner and Power Lease Programs 12-14

Close-Out Programs 15

Certified Pre-Owned Program – Cash Crop Products 16

Trade-In Products 17

Lease Information 18-23

Multi-Unit Purchase Program 24-25

Program Details: Spreader Escalator Program Posted to the Dealer Portal

Rent-To-Rent Policy – CE Posted to the Dealer Portal

Special Rent-To-Rent (RTR) Pay Plan Option – CE Posted to the Dealer Portal

Rent-To-Own Policy – CE Posted to the Dealer Portal

CNH Industrial Capital Loan & Lease Rates – AG Posted to the Dealer Portal

CNH Industrial Capital Loan & Lease Rates – CE Posted to the Dealer Portal Co-op Eligible Minimum Advertised Pricing Updated on the Dealer Portal Program Guidelines Posted to the Dealer Portal

Page 1 of 25

https://portal.cnh.com/dp6/myportal/dealerportal/WholegoodsNav?portlet_content=/casenewholland/wholegoods/programs/monthlypublishedsalesincentivedetails

Published Program Footnotes:

All units originally invoiced 12-31-2013 and prior are not eligible for retail programs. See DML U.S. No. 302/Canada No. 267.

The following applies to all programs -- Not all customers may qualify for the published low rates or interest waivers. A low-rate additive of 2.90%, or a reduced interest period will be required for silver scoring customer transactions. CNH Industrial Capital will inform you of the reduced interest waiver on silver scoring customer transactions.

This low-rate additive does not apply to low rate finance leases, operating leases or consumer contracts. Other Programs (See details on Dealer Portal at Wholegoods / Programs / Monthly Published Sales

Incentive Details) Program Acronyms: BMW – Built My Way CPO – Certified Pre-Owned CQR – Customer Qualified Rate CSA – Cash Settlement Allowance DCA – Dealer Cash Allowance LRF – Low Rate Financing PPP – Purchased Protection Plan QSA – Quick Settlement Allowance RSB – Retail Salesperson Bonus RV – Residual Value

New Holland reserves the right to adjust incentives at any time prior to the announced expiration date. Advanced notice of incentive revisions will be provided, if at all possible. The New Holland Incentive Protection Policy will apply to valid Retail customer orders (YSR) entered prior to the

incentive revision date, unless otherwise noted. Refer to the Dealer Policy Manual, Chapter 4.5 for complete Incentive Protection Policy details.

CONFIDENTIAL – PROPRIETARY INFORMATION

In all instances, program details listed in the Program Bulletins will supersede the following matrix pages.

This information is proprietary and confidential to CNH Industrial and is only approved to be used by its authorized dealers and distributors in facilitating customer sales. It cannot be disclosed to third

parties in any form without New Holland’s prior written consent.

Page 2 of 25

CNH Industrial America LLC

500 Diller Avenue, P.O. Box 1895

New Holland, PA 17557-0903

Telephone: (717) 355-1121

www.newholland.com/na

April 1, 2017 DEALER SALES LETTER, U.S. NO. 820 NEW HOLLAND DEALERS, UNITED STATES SUBJECT: APRIL 2017 INCENTIVE PROGRAMS As we are rolling into the busy season, New Holland is pleased to provide you with an enhanced program package to support this busy selling season. Program highlights include:

10% Spring into Action promotion continues through April. Use this promotion to move out the old inventory to get ready for the new.

10% Cash plus 2.9%/60 months continues on Major Hay and Forage Products and has been introduced on Boomer Tractors, WORKMASTER Tractors and select Mid-Range Tractors

0% for 84 month option is available on select <140hp Tractors Enhancements have been made to Mid-Range Tractor Cash Plus Financing Construction Equipment continues with consistent 0% for 48 month

financing or 10% DCA plus $500 RSBs are available on SSL and CTL units. Order Writing on <140HP Tractors, Cash Crop and Construction Equipment will be re-opening. Be sure to work with your Territory Business Manager to develop a plan to achieve your order writing targets and maximize the program opportunities. Beth Rider Manager, Pricing & Programming New Holland, North America Attachment

Page 3 of 25

http://www.newholland.com/na

RSB Loyalty Trade Competitive Trade Spring Into Action

PIN PIN PIN PIN

8200 8870* 8335* 8083**

Round Balers $300 $1,200 $3,000 10%

Small Square Balers $300 $500 $2,500 -

Disc Mower-Conditioners $300 $1,200 $2,500 -

Sickle Mower-Conditioners $300 $500 $1,000 -

Large Square Balers $500 $4,000 $10,000 -

SP Windrowers $500 $4,000 $10,000 10%

MegaCutter Model 512 Front $300 $500 $1,000 -

MegaCutter Model 530 Rear $300 $1,200 $2,500 -

All Heads for SP Windrower and SMC except HB Series Heads - - - -

HB Series Heads for SP Windrowers - - - -

Low Rate RSB Loyalty Trade Competitive Trade Spring Into Action

Program PIN PIN PIN PIN

9005C 8200 8870* 8335* 8083**

Round Balers 2.9%/60 Months $300 $1,200 $3,000 10%

Small Square Balers 2.9%/60 Months $300 $500 $2,500 -

Disc Mower-Conditioners 2.9%/60 Months $300 $1,200 $2,500 -

Sickle Mower-Conditioners 2.9%/60 Months $300 $500 $1,000 -

Large Square Balers 2.9%/60 Months $500 $4,000 $10,000 -

SP Windrowers 2.9%/60 Months $500 $4,000 $10,000 10%

MegaCutter Model 512 Front 2.9%/60 Months $300 $500 $1,000 -

MegaCutter Model 530 Rear 2.9%/60 Months $300 $1,200 $2,500 -

Heads for SP Windrower & SMC 2.9%/60 Months - - - --

Notes:*Competitive Trade and Loyalty Trade are available on like model trade-in units Model Year 2007 or newer, non Case IH units,

with product information (competitive Manufacturer, Serial Number, Year of Manufacture, and Model in the Manage Trade

section of eSettlements) at time of retail settlement.

**Eligible units invoiced from January 1, 2014 through August 31, 2015.

# **Program ends on April 30, 2017.

10%

DCA

PIN

8000

10%

10%

10%

10%

10%

10%

10%

10%

30%

10%

10%

10%

10%

10%

DCA

8050

PIN

10%

10%

10%

Hay and Forage Major Products

April 1 - June 30, 2017

10%

Option A - Cash Deal

Program Protection: DCA - Yes; RSB - Yes; Loyalty Trade - Yes; Competitive Trade - Yes; Spring Into Action - No

Option B - Cash Plus Low Rate Financing Deal

Program Protection: LRF - Yes; RSB - Yes; Loyalty Trade - Yes; Competitive Trade - Yes; Spring Into Action - No

Page 4 of 25

DCA PIN Loyalty Trade Competitive Trade

8000 8870* 8335*

11% $500 $1,000

6% $500 $1,000

6% - -

7% - -

10% - -

6% $500 $1,000

10% $500 $1,000

20% $500 $1,000

9% $500 $1,000

9% $500 $1,000

16% $500 $1,000

6% - -

10% - -

12% - -

6% - -

12% - -

6% - -

6% - -

6% - -

8% - -

6% - -

6% - -

6% - -

6% - -6% - -

LRF PIN DSA PIN Loyalty Trade Competitive Trade

9006 8100 8870* 8335*

# 0.0%/48 Months 5% $500 $1,000

# 0.0%/48 Months - $500 $1,000

# 0.0%/48 Months - - -

# 0.0%/48 Months - $500 $1,000

# 0.0%/48 Months 4% $500 $1,000

# 0.0%/48 Months 14% $500 $1,000

# 0.0%/48 Months 3% $500 $1,000

# 0.0%/48 Months 3% $500 $1,000

# 0.0%/48 Months 10% $500 $1,000

# 0.0%/48 Months - - -

# 0.0%/48 Months - - -

# 0.0%/48 Months - - -

# 0.0%/48 Months - - -

# 0.0%/48 Months - - -

# 0.0%/48 Months - - -

# 0.0%/48 Months 2% - -

# 0.0%/48 Months - - -

# 0.0%/48 Months - - -

# 0.0%/48 Months - - -

# 0.0%/48 Months - - -

# 0.0%/48 Months - - -

Notes:*Competitive Trade and Loyalty Trade are available on like model trade-in units Model Year 2007 or newer, non

Case IH units, with product information (competitive Manufacturer, Serial Number, Year of Manufacture, and

Model in the Manage Trade section of eSettlements) at time of retail settlement.

**When sold with a new Small Square Baler, the Model 72 Bale Thrower receives the same financing as the base unit.

Hay and Forage Supporting Products

April 1 - June 30, 2017

ProRotor™ Rotary Rake

Rolabar® 57, 256, 258, 260

216 Unitized Bar Rake

38 Crop Chopper

PT Mergers

100 Series Box Spreaders

DuraTank™/HydraBox™/M Series

BF2300 Adapter Frame

Stackcruiser® SP Bale Wagon

Bale Throwers **

PT Forage Harvester & Heads

38 Crop Chopper

F62B Forage Blower

ProTed™ 3625 Tedder

Bale Throwers

H5980 Wheel Rake

ProCart™ 1022, 1225 Wheel Rake

ProRotor™ 3114 Rotary Rake




ProCart™ 819 Wheel Rake

H5920 Wheel Rake

DuraVee™ Wheel Rake

Option B - Low Rate Financing Deal

Program Protection: LRF - Yes; DSA - Yes; Loyalty Trade - Yes; Competitive Trade - Yes

BF2300 Adapter Frame

PT Forage Harvester & Heads

H5980 Wheel Rake

H5920 Wheel Rake

DuraVee™ Wheel Rake

HT152, HT154 Wheel Rake

H6000 Series Disc Mower

HM Series Disc Mower

Tedders

ProCart™ 819 Wheel Rake

ProCart™ 1022, 1225 Wheel Rake

H6000 Series Disc Mower

HM Series Disc Mower


DuraTank™/HydraBox™/M Series

Rolabar® 57, 256, 258, 260 Bar Rakes

216 Unitized Bar Rake

F62B Forage Blower

100 Series Box Spreaders

PT Mergers

Stackcruiser® SP Bale Wagon

HT152, HT154 Wheel Rake


Program Protection: DCA - Yes; Loyalty Trade - Yes; Competitive Trade - Yes

Page 5 of 25

DCA RSB

PIN PIN

Models *8000 8200

(New) Boomer 35, 40, 45, 50, 55 (T4B) 10% $300

(New) WORKMASTER 35, 40 (T4B) 10% $300

(Current) Boomer 24, 33, 37, 41, 47 # 18% $300

Boomer CVT 15% $300

(Current) WORKMASTER 33, 35, 37, 40 # 18% $300

WORKMASTER 45, 55, 65, 75, 50, 60, 70 18% # $300

All Compact Loaders 15% $0

Ag Loader - 600 Series 15% $0

All Implements 10% $0

*PIN 8000 must be taken on loader/implement invoice at settlement.

DCA LRF LRF RSB

PIN PIN PIN PIN

Models *8050 9021C OR **9188 8200

All Compact Tractors (Excludes WM Utility Models) # 5% $300

WORKMASTER 45, 55, 65, 75, 50, 60, 70 # 5% # $300

All Compact Loaders 15% OR 0%/24; 3.9%/36; 4.9%/48; 5.9%/60; 6.9/72 Mo. $0

Ag Loaders - 600 Series 15% OR 0%/24; 3.9%/36; 4.9%/48; 5.9%/60; 6.9/72 Mo. $0

All Implements 10% OR 0%/24; 3.9%/36; 4.9%/48; 5.9%/60; 6.9/72 Mo. $0

Boomer Guard™ - 24 Month/750 Hour base unit. Powertrain - 72 Months/1500 Hour.

DCA LRF LRF RSB

PIN PIN PIN PIN

Models *8070 9022C OR **9188 8200

All Compact Tractors (Excludes WM Utility Models) # 10% $300

WORKMASTER 45, 55, 65, 75, 50, 60, 70 # 10% # $300

All Compact Loaders 15% OR 0%/24; 3.9%/36; 4.9%/48; 5.9%/60; 6.9/72 Mo. $0

Ag Loaders - 600 Series 15% OR 0%/24; 3.9%/36; 4.9%/48; 5.9%/60; 6.9/72 Mo. $0

All Implements 10% OR 0%/24; 3.9%/36; 4.9%/48; 5.9%/60; 6.9/72 Mo. $0


Subject to CNHi Captial Review and Approval; not all customers qualify. Down-payment may be required.

Subject to CNHi Captial Review and Approval; not all customers qualify. Down-payment may be required.

Option C - Cash Plus Low Rate Financing Deal

Program Protection: DCA - Yes; LRF - Yes; RSB - Yes

# 2.9%/60 Mo.

**Tractors do not qualify for PIN 9188.

**All tractors, loaders and implements are eligible with DCA PIN 8070 and PIN 9022C if sold with a base unit OR DCA PIN 8070 and PIN 9188 when sold separately.

**Tractors do not qualify for PIN's 8050 or 9188.

**Loaders and Implements are eligible with DCA PIN 8050 and PIN 9021C if sold with a base unit OR DCA PIN 8050 and PIN 9188 when sold seperately.


Boomer™ Series / WORKMASTER™ Series

April 1 - June 30, 2017

Tractors Include: Boomer 24, 33, 37, 41, 47 / Boomer 35, 40, 45, 50, 55 / Boomer Easydrive 3040, 3045, 3050, 45D, 46D, 50D, 54D /

WORKMASTER 33, 37, 45, 55, 65, 75, 50, 60, 70 / WORKMASTER 35, 40


Program Protection: DCA - Yes; RSB - Yes

Option B - Cash Plus Low Rate Financing Deal

Program Protection: DCA - Yes; LRF - Yes; RSB - Yes

0%/60, # 0.75%/72, 1.25%/84

Mo.

# Please see your FSM for 0% Financing for up to 84 months with DCA give up.

Page 6 of 25

Models DCA QSA RSB

7000 8560 7200

SSL/CTL 10% 2% $500

TLB, TL, CWL, Mini Ex 10% 2% $300

Models LRF LRF *DCA QSA RSB

7004 8560 7200

SSL, CTL 0%/48 2.99%/60 5% 2% $500

TLB, TL, CWL, Mini Ex 0%/48 2.99%/60 5% 2% $300

Models

SSL/CTL

TLB, TL, CWL, Mini Ex

Models RTO

7400

SSL/CTL $1

TLB, TL, CWL, Mini Ex $1

Models

SSL, CTL, TL, TLB, CWL,

Mini Ex

Models

9501L

# See CE RV Matrix for Residual Values and Lease Guidelines.

Option C - Op Lease Deal

Program Protection: LRF - Yes; RSB - Yes

1.50% for 24 Months

SSL, CTL, TL, TLB, CWL,

Mini Ex

2.90% for 36 Months

3.90% for 48 Months

4.50% for 60 Months

9501 ** OR ** 9501C

Option B - Finance Deal

Program Protection: LRF, DCA, QSA - Yes; RSB - Yes

*DCA PIN 7004 is not eligible with PIN 9501. QSA - Units must be settled within 31 days of original invoice

date or requested delivery date; whichever date is later.

RSB

RSB

7200

$500

$300

Option D - Rent To Own

Program Protection: RTO - Yes; RSB - Yes

0% for 36, 1.75% for 48, 3.6% for 60

LRF

QSA - Units must be settled within 31 days of original invoice date or

requested delivery date; whichever date is later.

Program Protection: - Yes

Program Protection: Yes

RTRF

9629

**Full Machine Factory Warranty 3 Year/3000 Hour on SSL and CTL.

12%

Option F - Exit Financing RTR

$500

$300

Option E - Rent To Rent

Program Protection: Yes

RTR

7300

7200

Light Construction

April 1 - June 30, 2017

New Holland Light Construction: SSL, CTL, TLB, TL, CWL, MINI EX


Program Protection: DCA, QSA - Yes; RSB - Yes

Page 7 of 25

Competitive Spring Into Action

Trade PIN PIN

8000 8175** 8200 8201* 8083***

TK Series 14% - # $300 - -

14% - # $300 - -

14% - # $300 - -

14% - # $300 - -

14% - # $300 - -

20% - # $300 - -

PowerStar 10% - # $300 $3,000 -

# 12% - # $300 $3,000 -

# 12% 2% # $300 $3,000 -

# 10% - # $300 $3,000 -

# 10% - # $300 $3,000 -

TS6 Series # 10% - # $300 # $4,000 10%

T6 Series 10% - # $300 $10,000 -

10% - $300 - -

20% - $300 - -

$1,000 - - - -

15% - - - -


Trade PIN PIN

8050 8200 8201* 8083***

TK Series # 0% # $300 - -

T4000 F/V Series # 0% # $300 - -

T4 F/V Series # 0% # $300 - -

PowerStar # 7% # $300 $3,000 -

T4 Series # 7% # $300 $3,000 -

T5 Series # 6% # $300 $3,000 -

TS6 Series # 6% # $300 # $4,000 10%

T6 Series # 6% # $300 $10,000 -

# 0% $300 - -

# 0% $300 - -

$1,000 - -

15% - -


Trade PIN PIN

8070 8200 8201* 8083***

PowerStar 10% $300 $3,000 -

T4 Series 10% $300 $3,000 -

T5 Series 10% $300 $3,000 -

TS6 Series 10% $300 $4,000 10%

T6 Series 10% $300 $10,000 -

# ***Program ends on April 30, 2017.


Program Protection: DCA - Yes; RSB - Yes; Competitive Trade - Yes; Spring Into Action - No

Tractors Include: TK, T4000 F/V, T4 F/V, PowerStar, T4, T5, TS6, T6, Telehandler

# Option B - Cash Plus Low Rate Financing Deal

Program Protection: DCA - Yes; LRF - Yes; RSB - Yes; Competitive Trade - Yes; Spring Into Action - No

Telehander

Family ModelDCA PIN LRF PIN RSB PIN

0%/60, # 0.75%/72, 1.25%/84 Mo.TS6.110/120/125/130/140

T6.140/145/150/155/160/165/175/180

* Competitive Trade is available on like model trade-in units Model Year 2007 or newer, non Case IH units, with product information (competitive

***Eligible units invoiced from January 1, 2014 through August 31, 2015.

Manufacturer, Serial Number, Year of Manufacture, and Model in the Manage Trade section of eSettlements) at time of retail settlement.

The following serial number breaks denote T4 Series units with the 12x12 transmission:

ZxLE5xxxx/ ZxJT5xxxx/ ZxJY5xxxx

(x’s are placeholders)

order codes on invoice: X99802X / 759310

**PIN 8175 can only be used with T4 Series Utility tractors with 12x12 transmissions AND one of the following UTILITY Package

2.9%/60 Mo.

T4.65/75 2.9%/60 Mo.

T4.85/90/95/100/105/110/115/120 2.9%/60 Mo.

T5.95/105/110/115/120 2.9%/60 Mo.

TS6.110/120/125/130/140 2.9%/60 Mo.

T6.140/145/150/155/160/165/175/180

0%/60, # 0.75%/72, 1.25%/84 Mo.

T4.75F/V T4.85F/V T4.95F/V T4.105F/V

Telehander

Ag Loaders600 Series 0%/60, # 0.75%/72, 1.25%/84 Mo.

LM 6.32/7.42 Elite/9.35/5080 0%/60, # 0.75%/72, 1.25%/84 Mo.

800/805 Series 0%/60, # 0.75%/72, 1.25%/84 Mo.

0%/60, # 0.75%/72, 1.25%/84 Mo.

# Please see your FSM for 0% Financing for up to 84 months with DCA give up for the PowerStar, T4, T5, TS6, and T6 Series.

# Option C - Cash Plus Low Rate Financing Deal

Program Protection: DCA - Yes; LRF - Yes; RSB - Yes; Competitive Trade - Yes; Spring Into Action - No

Family

0%/60, # 0.75%/72, 1.25%/84 Mo.

RSB PIN

9041C

Ag Loaders800/805 Series

600 Series

TK 4030V/4050/4050M/4060

T4.65/75

T4000 F/V SeriesT4.75F/85F/95F/105F

T4.75V/85V/95V/105V

T6.140/145/150/155/160/165/175/180

LM 5.25/6.28/5030/5060

TS6.110/120/125/130/140

T4.85/90/95/100/105/110/115/120

Utility Package T4.90/100/110/120 **

T5.95/105/110

T5.115/120

T4 Series

T5 Series

T4 F/V Series

T4.90F/100F/110 F

T4.90V/100V/110V

T4.80 F/V

Mid-Range Tractors

April 1 - June 30, 2017

Family ModelDCA PIN DCA PIN RSB PIN

TK 4030V/4050/4050M/4060

LM 6.32/7.42 Elite/9.35/5080

ModelDCA PIN

0%/60, # 0.75%/72, 1.25%/84 Mo.T4.80 F/V T4.90F/V T4.100F/V T4.110 F/V

0%/60, # 0.75%/72, 1.25%/84 Mo.

T5.95/105/110/115/120 0%/60, # 0.75%/72, 1.25%/84 Mo.

T4.85/90/95/100/105/110/115/120 0%/60, # 0.75%/72, 1.25%/84 Mo.

T4.65/75

LRF PIN

LM 5.25/6.28/5030/5060 0%/60, # 0.75%/72, 1.25%/84 Mo.

9040C

Page 8 of 25

DCA PIN8033

Combines Combines 3%Combine Head Combine Head 3%

Combines

Combine Head

MY17 MY17 MY17

DCA PIN DCA PIN LRF PIN8000 8033 9080C

Combines 3% Combines 0% 3.5% / 60 monthsCombine Head 3% Combine Head 0% 3.5% / 60 months

MY17

DCA PIN 8034

Combines 0%

Combine Head 0%

Combine Heads receive the same financing as settled combine.

MY2016 CR/CX Combines have Serial Numbers less than YGG119800 and XX1978XXX.

MY2016 Combine Heads have a Ship Date Prior to 10/1/16.

QSA - Units must be settled within 31 days of original invoice date or requested delivery date.

Option C - Interest Waiver


MY 2017 BMW Program (see DML U.S. No. 541, Canada No. 489)

Option A - Cash Deal - MY17

Program Protection: DCA - Yes; QSA - Yes

Option B - Cash Plus Low Rate Financing Deal - MY17

Program Protection: DCA - Yes; LRF - Yes; QSA - Yes

12 Month Interest Waiver Followed by CQR

9080W



DCA PIN

8034

3%

3%

April 1 - June 30, 2017Combines

MY 2016 & Prior

INTEREST WAIVER PIN

Option A - Cash Deal - MY16 & Prior Option B - Cash Plus Low Rate Financing Deal - MY16 & Prior

Program Protection: DCA - Yes Program Protection: DCA - Yes; LRF - Yes

Program Protection: DCA - Yes


INTEREST WAIVER PIN

9080W

DCA PIN

8000

6%6%

LRF PIN

9080C

3.5% / 60 months-

MY17

QSA

8973

3%2%

MY17

QSA

8973

3%2%

MY17

QSA

8973

3%2%

Page 9 of 25

DCA PIN8033

T7 SWB T7 SWB 3%

T7 LWB T7 LWB 3%

T8 T8 3%

T9 T9 3%

800/805 Loader 800/805 Loader $1,000

T7 SWB

T7 LWB

T8

T9800/805 Loader

MY17 MY17

DCA PIN DCA PIN8000 8033

T7 SWB 3% T7 SWB 0%

T7 LWB 3% T7 LWB 0%

T8 3% T8 0%

T9 3% T9 0%800/805 Loader $1,000 800/805 Loader $1,000

MY17

DCA PIN 8034

T7 SWB 0%

T7 LWB 0%

T8 0%

T9 0%800/805 Loader $1,000

MY2016 T7 HD Tractors have Serial Numbers Less than ZGEA05832.

MY2016 T7 SWB Tractors have Serial Numbers Less than ZGEN06151, or begin with ZGEN3XXXX.

MY2016 T7 LWB Tractors have Serial Numbers Less than ZGEZ06156, or begin with ZGEZ3XXXX.

MY2016 T8 Tractors have Serial Numbers less than ZGRE05001.

MY2016 T9 Tractors have Serial Numbers less than ZGF403500.




MY 2017 BMW Programs (see DML U.S. No. 541, Canada No. 489)

Option A - Cash Deal - MY17 Option B - Cash Plus Low Rate Financing Deal - MY17

9080W





3%

3%

3%

0%

INTEREST WAIVER PIN

Option B - Cash Plus Low Rate Financing Deal - MY16 & Prior

Program Protection: DCA - Yes; LRF - Yes

MY 2016 & Prior

Option A - Cash Deal - MY16 & Prior


INTEREST WAIVER PIN

9080W

$1,000

3%12 Month Interest Waiver Followed by CQR


DCA PIN

8000

6%

6%

6%

9080C

3.5% / 60 months

3.5% / 60 months

3.5% / 60 months


$1,000

LRF PIN

9080C

3.5% / 60 months

3.5% / 60 months

3.5% / 60 months

0%

3%

0%

MY17

QSA

8973


12 Month Interest Waiver Followed by CQR 3%

3.5% / 60 months

T7/T8/T9 Series

April 1 - June 30, 2017

3%

3%

3%

MY17

QSA

8973


LRF PIN


MY17

Program Protection: DCA - Yes; LRF - Yes; QSA - Yes

MY17

QSA

8973

6% 3.5% / 60 months

12 Month Interest Waiver Followed by CQR 3%

3% 3.5% / 60 months 3%

3%

3%

3.5% / 60 months

DCA PIN

8034

3%

3%



Page 10 of 25

DCA PIN BMW DCA PIN MY17 BMW Retail RSB PIN

8000 8171 8235 8200

MY17 BMW YSR Order - 4% See BMW Letter $500

MY17 YIN Inventory 10% - U.S. No. 525A/ $500

MY16 - - Canada No. 472A $500

MY15 - For Details $500

INTEREST WAIVER PIN MY17 BMW Retail RSB PIN

9100W 8235 8200

MY17 BMW YSR Order 24 Month Interest Waiver Followed by CQR See BMW Letter $500

MY17 YIN Inventory 24 Month Interest Waiver Followed by CQR U.S. No. 525A/ $500

MY16 24 Month Interest Waiver Followed by CQR Canada No. 472A $500

MY15 24 Month Interest Waiver Followed by CQR For Details $500

MY17 BMW YSR Orders are MY17 Retail units eligible for the BMW program.

MY17 BMW Retail PIN 8235 only applicable for YSR/YSP orders.

MY17 BMW DCA PIN 8171 only applicable for YSR/YSP orders. This includes invoiced units or new pre-sell orders.

These programs are only eligible for grower end user customers. A grower end user customer is an end user of Application Equipment

who will use the products on its own behalf and not for hire to third parties.

MY17 SP Sprayers: Serial Number YGYM01020 and Above

MY16 SP Sprayers: Serial Number From YFYM00906 To YGYM01019

MY15 SP Sprayers: Serial Number From YEYM00809 To YFYM00905

MY14 SP Sprayers: Serial Number From YDYM00596 To YEYM00808

DCA PIN BMW DCA PIN MY17 BMW Retail RSB PIN

8000 8171 8269 8200

MY17 BMW YSR Order - 3% DCA See BMW Letter $500

MY17 YIN Inventory 4% - U.S. No. 491C $500

MY16 5% - For Details. $500

LRF PIN MY17 BMW Retail RSB PIN

9101C 8269 8200

MY17 BMW YSR Order See BMW Letter $500

MY17 YIN Inventory 0.0%/48 Months U.S. No. 491C $500

MY16 & MY15 0.9%/60 Months For Details. $500

MY14 & Prior 1.9%/72 Months $500

MY17 BMW YSR Orders are MY17 Retail units eligible for the BMW program.

MY17 BMW Retail PIN 8269 only applicable for YSR/YSP orders placed between May 1, 2016 and November 30, 2016.

MY17 BMW DCA PIN 8171 only applicable for YSR/YSP orders placed between May 1, 2016 and November 30, 2016 and taking the BMW PIN 8269.

MY17 Air Carts: Serial Number YGS069000 and Above

MY16 Air Carts: Serial Number From YES057000 To YGS057999

MY15 Air Carts: Serial Number From YES051000 To YES051999

MY14 Air Carts: Serial Number From YDS047000 To YES047999

MY17 Air Drills: Serial Number YGS067000 and Above

MY16 Air Drills: Serial Number From YFS061000 To YGS062999

MY15 Air Drills: Serial Number From YES055000 To YFS056999

MY14 Air Drills: Serial Number From YDS045000 To YES046999

SP SprayersApril 1 - June 30, 2017

Planting, Seeding, Tillage

April 1 - June 30, 2017

Program Protection: RSB - Yes


Program Protection: DCA - Yes; RSB - Yes

Option B - Interest Waiver


Program Protection: DCA - Yes; RSB -Yes

Option B - Low Rate Financing Deal

Program Protection: LRF - Yes; RSB - Yes

All Model Years qualify for any of the 3 Low Rate Financing options listed above.

Page 11 of 25

RSBCompetitive Trade

Loyalty

Trade

Spring Into

Action

Program MY17 MY17 PIN PIN PIN PIN

9005L 300 Hrs 600 Hrs 8200 8335* 8870* 8083**

Term Chart/Rate RV%* RV%*

Round Balers 36 96/0.0% $300 $3,000 $1,200 10%

Large Square Balers 48 108/3.0% $500 $10,000 $4,000 -

60 110/3.5%

36 96/0.0% 61% 54%

48 108/3.0% 55% 45% $500 $10,000 $4,000 10%

60 110/3.5% 41% 29%

*Competitive Trade and Loyalty Trade are available on like model trade-in units Model Year 2007 or newer, non

Case IH units, with product information (competitive Manufacturer, Serial Number, Year of Manufacture, and Model

in the Manage Trade section of eSettlements) at time of retail settlement.



RSB

Program MY17 MY17 PIN

9020L 300 Hrs 600 Hrs 8200

Term Chart/Rate RV%* RV%*

36 110/3.50% 71% 67%

48 114/4.50% 62% 57%

60 118/5.50% 57% 51%

36 110/3.50% 67% 63%

48 114/4.50% 62% 57%

60 118/5.50% 59% 53%

36 110/3.50% 67% 63%

48 114/4.50% 62% 57%

60 118/5.50% 59% 53%

Program MY17 MY17 RSB Competitive

9040L 300 Hrs 600 Hrs PIN Trade PIN PIN

Term Chart/Rate RV%* RV%* 8200 8201* 8083**

36 110/3.50% 67% 63%

48 115/4.75% 62% 57% -

60 118/5.50% 59% 53%

36 110/3.50% 67% 63%

48 115/4.75% 62% 57% 10%

60 118/5.50% 59% 53%

36 110/3.50% 67% 63%

48 115/4.75% 62% 57% -

60 118/5.50% 59% 53%

36 110/3.50% 59% 55%

48 115/4.75% 54% 49% -

60 118/5.50% 51% 45%

36 100/1.00% # 73% # 69%

48 107/2.75% # 68% # 63% -

60 111/3.75% # 65% # 59%

*Competitive Trade is available on like model trade-in units Model Year 2007 or newer, non Case IH

units, with product information (competitive Manufacturer, Serial Number, Year of Manufacture,

and Model in the Manage Trade section of eSettlements) at time of retail settlement.



RSB

Program PIN

9040L 8200

Term Chart/Rate

36 111/3.75%

48 114/4.50%

60 118/5.50%

Models

48%

41%

For MY16 units, deduct 3% from the below published RV%. For all other MY, please refer to the RV Matrices.

OPERATING LEASE

Hay & Forage Major Products -- Partner Lease

Program Protection: Rate - Yes; RV% - No; RSB - Yes; Competitive Trade - Yes; Loyalty Trade - Yes; Spring Into Action - No

*All Partner Lease RV% Below Include Dealer RV% Participation of

(as a % of DNET):

36 7%

48 2%

60 0%

Partner Lease

All Segments

April 1 - June 30, 2017

36%

SP Windrowers

OPERATING LEASE

Pro Work Tools -- Partner Lease

Program Protection: Rate - Yes; RV% - No; RSB - Yes

Models

Boomer Series $300

# $300

$3,000

# $4,000

$3,000

OPERATING LEASE

WORKMASTER Utility # $300

TS6 Tier 3 & 4B

Mid-Range Tractors -- Partner Lease

Program Protection: Rate - Yes; RV% - No; RSB - Yes; Competitive Trade: Yes; Spring Into Action - No

Spring Into

Action

WORKMASTER Compacts $300

57%

Models

T4000, PowerStar, T4 Tier

4A, 4B# $300

# $300

T5 Tier 4A, 4B

-

$10,000

Specialty # $300

$30050%

44%

T6 Tier 4A, 4B # $300

Telehandlers -- Partner Lease

Program Protection: Rate - Yes; RV% - No; RSB - Yes

OPERATING LEASE

MY17

800 Hrs RV%

Models

Telehandlers

Page 12 of 25

MY17 MY16 & Prior MY17

Program MY17 MY17 DCA DCA QSA

9081L 300 Hrs 600 Hrs PIN PIN PIN

Term Chart/Rate RV%* RV%* 8821 8821 8973

36 100/1.0% # 73% # 69% 0% 3% 3%

48 110/3.5% # 68% # 63% 0% 3% 3%

60 114/4.5% # 65% # 59% 0% 3% 3%

36 100/1.0% 70% 66% 0% 3% 3%

48 110/3.5% 66% 61% 0% 3% 3%

60 114/4.5% 64% 58% 0% 3% 3%

MY17 MY16 & Prior MY17

Program MY17 MY17 DCA DCA QSA

9080L 300 Hrs 500 Hrs PIN PIN PIN

Term Chart/Rate RV% RV%* 8042 8042 8973

36 118/5.5% 54% 44% 0% 3% 3%

48 120/6.0% 46% 36% 0% 3% 3%

60 122/6.5% 39% 27% 0% 3% 3%

36 118/5.5% - - 0% 3% 2%

48 120/6.0% - - 0% 3% 2%

60 122/6.5% - - 0% 3% 2%

For MY16 units, deduct 3% from the below published RV%. For all other MY, please refer to the RV Matrices.


48

For MY17 units, see DML U.S. No. 541, Canada No. 489.

T7 LWB

2%

60 0%

OPERATING LEASE

*All Partner Lease RV% Below Include Dealer RV% Participation of

(as a % of DNET):

36

Models

T7 SWB

Combine Head

7%

T7 SWB & T7 LWB -- Partner Lease

Partner Lease

All Segments

April 1 - June 30, 2017

Program Protection: Rate - Yes; RV% - No; DCA - Yes; QSA - Yes

Combines -- Partner Lease

Program Protection: Rate - Yes; RV% - No; DCA - Yes; QSA - Yes

Combines

Models

OPERATING LEASE

Page 13 of 25

MY17 DCA MY16 DCA MY15 DCA

Program MY17 MY17 MY17 PIN PIN PIN

9333L 300 Hrs 600 Hrs 900 Hrs 8146 8146 8146

Term Chart/Rate RV% RV% RV%

T8 36* 104/2.00% 72% 68% 63% 4% 9% 11%

T8 48 108/3.00% 66% 61% 55% 4% 9% 11%

T8 60 110/3.50% 63% 57% 49% 4% 9% 11%

T9 36* 104/2.00% 72% 68% 63% 4% 9% 11%

T9 48 108/3.00% 67% 63% 57% 4% 9% 11%

T9 60 110/3.50% 64% 60% 52% 4% 9% 11%

Program MY17 DCA MY16 DCA MY15 DCA

9333P PIN PIN PIN

Rate 8839 8839 8839

T8, T9 Irregular 96 2.90% 4% 9% 11%

Subject to CNHi Capital Credit Review and Approval; Titanium and Platinum scoring customers only.

Cannot be used with any other programs except Demo and EMW pool funds. A maximum of 5% EMW pool funds

MY2015 and Prior T8 Tractors have Serial Numbers less than ZFRE05001.

MY2015 and Prior T9 Tractors have Serial Numbers less than ZFF403003.

MY2016 T8 Tractors have Serial Numbers less than ZGRE5001.

MY2016 T9 Tractors have Serial Numbers less than ZGF403500.

T8 & T9 -- Power Lease

Program Protection: Rate - Yes; RV% - No; MY15/16 DCA - No; MY17 DCA - Yes

OPERATING LEASE

Models PPP

Power Programs

T8 and T9 Series Tractors

April 1 - June 30, 2017

48 month / $750 ded.

T8 & T9 -- Power Purchase

48 month / $750 ded.

*RV% for 36 month term (all annual hour usages) includes Powertrain PPP coverage as shown above.

Additional PPP coverage available for purchase to qualify for 2% pt increased RV with minimum 12 .

mo/acceptable hours PPP remaining at lease end for 48 and 60 month lease terms.

Cannot be used with any other programs except Demo and EMW pool funds. A maximum of 5% EMW pool funds may be used with the Power Lease.

may be used with the Power Purchase.

Contact CNH Industrial Capital for a quote.

RV% includes dealer residual participation of 7% @ 36 months, 2% @ 48 months, 0% @ 60 months as a % of DNET.

Deduct 3% pts from RV% shown above for MY16 units

For all eligible, new units with > 150 to 500 Current Engine Hours, deduct 2% from RV% shown above.

Purchase of eligible Equipment Alley unit required.

Models Pay Schedule Term

Program Protection: Rate - Yes; MY15/16 DCA - No; MY17 DCA - Yes

Retail Loan

Page 14 of 25

DCA PIN

8000

All Rustler Models $500

DCA PIN RSB PIN

8000 8200

T4000 Series

T4040 20% $300

(Serial Numbers: ZEJA05213 & ZEJA05251)

TDF Series

TD4040F 20% $300

(Serial Number: ZEAA03083)

Notes:Cannot be used with any other programs EXCEPT Customer Coupons, RSB and Dealer Pool Funds.


Close Out Programs

April 1 - June 30, 2017


Rustlers

Page 15 of 25

Certified Pre-Owned Programs

Cash Crop Products

April 1 - June 30, 2017

Model Interest Waiver Max Months PPP Total Engine Hours Deductible

CR/CX Combines 24 Month followd by CQR 72 + 12 Months 2000 $0

Qualifier: Qualifier:

Not eligible with any other trade-In financing option. New Holland Certified Pre-Owned Combines

(Base Units Only)

Model Interest Waiver Max Months PPP Total Engine Hours Deductible

T8/T9 Tractors 24 Month followd by CQR 72 + 12 Months 2500 $0

Qualifier: Qualifier:

No dealer participation New Holland Certified Pre-Owned

T8 and T9 Series Tractors

Programs below are EXCLUSIVELY for ONLY New Holland approved Certified Pre-Owned Units.

New Holland Certified Pre-Owned (CPO) Programs are eligible only on MY2012 or newer CR & CX Series combines, T8 & T9 series tractors.

• Combines must have 1,500 or less existing engine hours.

• Tractors must have 2,000 or less existing engine hours.

See Dealer Portal (under "Service" Tab / "Certified Pre-Owned" Link) for Additional Information / Requirements, which includes fluid analysis,

inpsection checklists and more.

New Holland approval required to be eligible for any of these CPO Programs.

Dealer will be charged back if these CPO programs are used on any non-approved New Holland Certified Pre-Owned Unit.

(Chargeback Amount = CPO program vs. Published program cost PLUS $1,000 additional administrative charge).

PPP PIN - 8939

High Horse Power Tractors

Interest Waiver PIN - 9091W

PPP PIN - 8939

Combines

Interest Waiver PIN - 9090W

Program Protection: No

Program Protection: No

Page 16 of 25

PIN Term Rate

24 1.9%

36 2.5%

48 2.9%

60 3.9%

72 4.9%

0.0% Financing for 36 Months – 1% Dealer Participation Required

OR


OR0.0% Financing for 60 Months – 3% Dealer Participation Required

36 3.5%

48 3.9%

60 4.5%

72 4.9%

36 5.9%

48 6.5%

60 6.5%

36 3.9%

48 4.5%

60 4.9%

36 3.5%

48 3.9%

60 4.5%

72 4.9%

PIN

9005UW

9100UW

PIN

36 6.5%

48 6.5%

60 6.5%

60 0.0%

*Units that qualify for programs 9089LR & 9099LR are T8/T9 Tractors that have or will be coming off an existing CNHi Capital lease

All Hay and Forage Products (excluding SP Forage) 9005U

9006UDAll Hay and Forage Products (excluding SP Forage)


9041U

9040U

Combines and Heads sold with a Base Unit (5% dealer

participation required)9080U

9100U

Consumer Products, Mowers, Attachments CNH Industrial Capital Customer Qualified Rate

Under 100 HP PTO Tractors

Trade-In ProductsApril 1 - June 30, 2017

Option A - Fixed Low Rate Deal

Model

Program Protection - No

Telehandlers

SP Sprayers

Over 100 HP PTO Tractors

*Qualifying NH Lease Returns (9098LR)9081U

SP Sprayers

Option B - Interest Waiver Deal

Model

6 month rolling interest waiver followed by CQR

24 Month Interest Waiver followed by CQR.Combines and Heads sold with a Base Unit 9080UW

Total contract term may not exceed 72 months.

All Hay and Forage Products (excluding SP Forage) 18 Month Interest Waiver followed by CQR – No Dealer Participation Required

Over 100 HP PTO Tractors

*Qualifying NH Lease Returns (9099LR)9081UW

12 months interest waiver followed by CQR

No Dealer Participation

Telehandlers 9042UNo dealer

Participation

Option C - Seasonal Payments Deal

Model

Page 17 of 25

NEW Operating Lease 6 12 8 10 APRIL 2017

800 64% 57% 53% 46%

300 71% 63% 62% 57%

450 69% 62% 59% 54%

600 67% 60% 57% 51%

900 62% 55% 51% 43%

1200 57% 49% 45% 35%

100 68% 64% 63% 60%

300 67% 61% 62% 59%

450 65% 60% 59% 56%

600 63% 58% 57% 53%

900 58% 53% 51% 45%

1200 53% 47% 45% 37%

300 71% 68% 66% 63%

450 69% 65% 63% 60%

600 67% 63% 61% 57%

900 62% 58% 55% 49%

1200 57% 52% 49% 41%

300 66% 63% 61% 58%

450 64% 60% 58% 55%

600 62% 58% 56% 52%

900 57% 53% 50% 44%

1200 52% 47% 44% 36%

300 64% 59% 61% 59%

450 62% 58% 58% 56%

600 60% 56% 56% 53%

900 55% 51% 50% 45%

1200 50% 45% 44% 37%

200 59% 52% 51% 45%CR6090/CR9040/CX80

40/CX8070$80/hr

300 54% 47% 46% 39%CR7090/CR9060/CX80

60/CR8080$90/hr

500 44% 37% 36% 27% CR9065 $95/hr

CR9070/CR8090 $100/hr

CR9080/CX8080 $110/hr

CX8090/CR9090 $120/hr

300 69% 61% 60% 46% FR480 $130/hr

600 62% 51% 50% 34% FR550 $160/hr

FR650/FR780 $185/hr

FR850 $210/hr

300 61% 56% 55% 41% SR160 $20/hr

600 54% 46% 45% 29% SR220 $30/hr

SR260 $34/hr

Hay & Forage

(Pull-Type)All N/A 48% 42% 41% 36% 12 point deduct for balers baling corn stovers

300 61% 53% 52% 44% SP.260R, SP.300R $75/hr

500 56% 48% 47% 39%SP.295F, SP.300C/F,

SP.345F, SP.400F$100/hr

700 51% 43% 42% 34%

900 39% 31% 30% 22%

Sprayers

(Pull-Type)All N/A 50% 43% 42% 35%

Air Seeder &

DrillsAll N/A 55% 43% 42% 30%

Non-CNH GPS

(See Notes

section on right if

CNH unit)

Telematics, Auto

guidance &

Machine Control

N/A 25% 20% 20% 15%

CNH GPS units (purchased through CNH Industrial Parts &

Service) will receive the same RV % as the main unit.

GPS units must be leased with the primary piece of equipment

that it will be installed on.

Other Ag

Equipment

Qualified by CNH

Industrial CapitalN/A 30% 25% 25% 20%

* Dealer Residual Value Participation Requirements (% of DNET) - included in published Residual Values:

36 Month Term 7% pts




.15/PTO hr

All

48 mo* 60 mo* Excess Usage Charges Notes

.18/PTO hr

42 mo*

T4, T5, TS6,

TV6070,

Workmaster

.25/PTO hr

.15/PTO hr

Construction/Land-Leveling Deduction:

Contact CNH Industrial Capital for construction / land-leveling

usage (does not include snow removal)

Vineyard/Orchard Deduction:

Deduct 8% pts from the published residual for vineyard/orchard

usage and T4 specialty tractor usage

T9 Track Deduction:

Deduct 4% pts from the published residual for T9 units with

tracks.

Deduct 4% pts from the published residual for rice usage

.18/PTO hr

Equipment Series

Annual

Usage

(Hrs)

36 mo*

Compact Tractors Boomers, T1500

All Models

All Models

Combines

(Separator hours)

All Models

Utility and Small

Row Crop

Tractors

Power Lease

Tractors

T8, T9

(If Tracked T9 unit,

see Notes section

on right for

deduct)

All Models

Utility and Small

Row Crop

Tractors

T6, T7 SWB

Large Row Crop

TractorsT7 LWB (220-270) All Models

All

Sprayers

(Self-Propelled)

Windrower

(Self Propelled)

Forage Harvester

(Self-Propelled)

All

All

See Power Lease Program

Contact yourCNH Industrial Capital

ASM/FSM

See next page for additional detailsPage 18 of 25

Lease residual values and purchase options for equipment may be adjusted (increased or decreased) dependent upon factors related to, but not

limited to, equipment specifications, intended usage, customer history, number of units leased or other factors that may impact equipment

values. Adjustments can occur with or without notice at any time, until the contract is signed by the customer and accepted by CNH Industrial

Capital.

The information contained herein is subject to final approval of CNH Industrial Capital, via the execution and approval of an Operating Lease. CNH Industrial Capital reserves all rights and remedies.

NEW Equipment:

Units within the current model year and prior model year, less than 150 hours and not previously retailed.

For prior model year units, deduct 3% pts from the published residuals.

Minimum Lease Sales Price (LSP) (Capitalized Cost): $10,000

Maximum Lease Sales Price (LSP) (Capitalized Cost):

New Equipment* - 120% of DNET less sales allowances/exchange discounts & rental payments, plus PDI & PPP premiums

Maximum Residual Value:

New Equipment* - % of DNET including steel surcharge less freight and exchange discounts

Minimum Residual Value: 18%

DNET = Invoice before discounts/programs, no freight or set up, less exchange

Adding attachments to the main unit (must be listed on a separate line item as the main unit):

A loader and one bucket will be included in the RV of the main unit.

Attachments, typically included after the original invoice (i.e. hitches, PTOs, weights) are included in the RV of the main unit.

Any additional CNH attachment(s) and approved non-CNH attachments must use the ‘Other Ag Equipment’ RV from the

published matrix.

Op Lease Dealer Residual Value Participation Requirements - included in published Residual Values:





Excess Residual Guaranty:

Subject to wholesale credit approval, dealers have the ability to guaranty additional excess residual above the published

Residual Values.

Contact your FSM/ASM if:

Equipment has more than 150 current hours

Lease includes 5 or more like units

Equipment is used in caustic applications (fertilizer, manure, salt, etc.)

Equipment is spec'd outside 'the normal'

For assistance, contact our Leasing Resource at 1-866-330-2869 or your CNH Industrial Capital FSM / ASM

Page 19 of 25

USED Operating Lease 6 12 8 10 APRIL 2017

800 69% 62% 58% 51%

300 76% 68% 67% 62%

450 74% 67% 64% 59%

600 72% 65% 62% 56%

900 67% 60% 56% 48%

1200 62% 54% 50% 40%

100 73% 69% 68% 65%

300 72% 66% 67% 64%

450 70% 65% 64% 61%

600 68% 63% 62% 58%

900 63% 58% 56% 50%

1200 58% 52% 50% 42%

300 76% 73% 71% 68%

450 74% 70% 68% 65%

600 72% 68% 66% 62%

900 67% 63% 60% 54%

1200 62% 57% 54% 46%

300 71% 68% 66% 63%

450 69% 65% 63% 60%

600 67% 63% 61% 57%

900 62% 58% 55% 49%

1200 57% 52% 49% 41%

300 69% 64% 66% 64%

450 67% 63% 63% 61%

600 65% 61% 61% 58%

900 60% 56% 55% 50%

1200 55% 50% 49% 42%

200 64% 57% 56% 50%CR6090/CR9040/CX8

040/CX8070$80/hr

300 59% 52% 51% 44%CR7090/CR9060/CX8

060/CR8080$90/hr

500 49% 42% 41% 32% CR9065 $95/hr

CR9070/CR8090 $100/hr

CR9080/CX8080 $110/hr

CX8090/CR9090 $120/hr

300 74% 66% 65% 51% FR480 $130/hr

600 67% 56% 55% 39% FR550 $160/hr

FR650/FR780 $185/hr

FR850 $210/hr

300 66% 61% 60% 46% SR160 $20/hr

600 59% 51% 50% 34% SR220 $30/hr

SR260 $34/hr

Hay & Forage

(Pull-Type)All N/A 53% 47% 46% 41% 12 point deduct for balers baling corn stovers

300 66% 58% 57% 49% SP.260R, SP.300R $75/hr

500 61% 53% 52% 44%SP.295F, SP.300C/F,

SP.345F, SP.400F$100/hr

700 56% 48% 47% 39%

900 44% 36% 35% 27%

Sprayers

(Pull-Type)All N/A 55% 48% 47% 40%

Air Seeder &

DrillsAll N/A 60% 48% 47% 35%

Non-CNH GPS

(See Notes

section on right

if CNH unit)

Telematics, Auto

guidance &

Machine Control

N/A 25% 20% 20% 15%





Other Ag

Equipment

Qualified by CNH

Industrial CapitalN/A 30% 25% 25% 20%





All

Forage Harvester

(Self-Propelled)All

Windrower

(Self Propelled)All

Sprayers

(Self-Propelled)

Deduct 4% pts from the published residual for rice usage

Aged/Used Combine Qualifications:

• Combines less than 5 yrs old and 1,400 current

separator hrs

• Age of equipment cannot exceed 8 years at lease

termination

• A completed, signed condition report is required

Construction/Land-Leveling Deduction:

Contact CNH Industrial Capital for construction / land-leveling

usage (does not include snow removal)

Vineyard/Orchard Deduction:

Deduct 8% pts from the published residual for

vineyard/orchard usage and T4 specialty tractor usage

Aged/Used Tractor Qualifications:

• Tractors less than 5 yrs old and 2,000 current hrs

(please contact your CNH Industrial Capital representative for

units exceeding 2,000 current hours)

• Age of equipment cannot exceed 8 years at lease

termination

• A completed, signed condition report is required

T9 Track Deduction:

Deduct 4% pts from the published residual for T9 units with

tracks.

Utility and Small

Row Crop

Tractors

T4, T5, TS6,

TV6070,

Workmaster

All Models .18/PTO hr

Large Row Crop

Tractors

T7 LWB (220-270),

T8All Models .18/PTO hr

4WD Tractors

Compact

TractorsBoomers, T1500 All Models

Dealer Residual Value Participation Requirements (% of LSP) - included in published Residual Values*:

* EQ Lease (Lease end purchase from Equipment Alley) does not require dealer residual value participation

Equipment Series

Annual

Usage

(Hrs)

36 mo* 48 mo* 60 mo* Excess Usage Charges Notes

.25/PTO hr

T9

(If Tracked unit,

see Notes section

on right for

deduct)

All Models .15/PTO hr

Combines

(Separator

hours)

All

Utility and Small

Row Crop

Tractors

T6, T7 SWB All Models .18/PTO hr

42 mo*

Contact yourCNH Industrial Capital

ASM/FSM


Lease residual values and purchase options for equipment may be adjusted (increased or decreased) dependent upon factors related to, but not

limited to, equipment specifications, intended usage, customer history, number of units leased or other factors that may impact equipment

values. Adjustments can occur with or without notice at any time, until the contract is signed by the customer and accepted by CNH Industrial

Capital.

The information contained herein is subject to final approval of CNH Industrial Capital, via the execution and approval of an Operating Lease. CNH Industrial Capital reserves all rights and remedies.

USED Equipment:

Used if one or more of these conditions are met:

a) 2015 model year and older

b) 150 or more hours

c) previously retailed

Tractors must be less than 5 yrs old and 2,000 current hrs

Combines must be less than 5 yrs old and 1,400 current separator hrs

Age of equipment cannot exceed 8 years at lease termination

All Used units require a condition report

Minimum Lease Sales Price (LSP) (Capitalized Cost): $10,000

Maximum Lease Sales Price (LSP) (Capitalized Cost):

Used Equipment - 120% of current Trade Premium Value.

Maximum Residual Value:

Used Equipment - % of the lesser of Lease Sales Price (LSP) or 110% of Trade Value Premium (TVP)

Minimum Residual Value: 18%

Adding attachments to the main unit (must be listed on a separate line item as the main unit):

A loader and one bucket will be included in the RV of the main unit.

Attachments, typically included after the original invoice (i.e. hitches, PTOs, weights) are included in the RV of the main unit.

Any additional CNH attachment(s) and approved non-CNH attachments must use the ‘Other Ag Equipment’ RV from the

published matrix.

Op Lease Dealer Residual Value Participation Requirements - included in published Residual Values*:

* EQ Lease (Lease end purchase from Equipment Alley) does not require dealer residual value participation





Excess Residual Guaranty:

Subject to wholesale credit approval, dealers have the ability to guaranty additional excess residual above the published

Residual Values.


Lease includes 5 or more like units

Equipment is used in caustic applications (fertilizer, manure, salt, etc.)

Equipment is spec'd outside 'the normal'

For assistance, contact our Leasing Resource at 1-866-330-2869 or your CNH Industrial Capital FSM / ASM

Page 21 of 25

Standard Operating Lease APRIL 20176 8 10

800 44% 42% 40%

1200 42% 40% 38%

1600 38% 36% 34%

2000 34% 32% 30%

800 59% 55% 50%

1200 57% 53% 48%

1600 53% 49% 44%

2000 49% 45% 40%

800 36% 34% 33%

1200 34% 32% 31%

1600 30% 28% 27%

2000 26% 24% 23%

800 58% 53% 49%

1200 56% 51% 47%

1600 52% 47% 43%

2000 48% 43% 39%

800 53% 50% 47%

1200 51% 48% 45%

1600 47% 44% 41%

2000 43% 40% 37%

800 60% 56% 51%

1200 58% 54% 49%

1600 54% 50% 45%

2000 50% 46% 41%

Non-CNH GPS

(See Notes section on

right if CNH unit)

Telematics, Auto

guidance &

Machine Control

N/A 25% 20% N/A





Light 1200 29% 23% 18%

Heavy 2000 29% 23% 18%

Wheel Loaders Compact Compact $10/hr

Excavators Compact Compact $15/hr

Tractor Loaders All Models $15/hr

Skid Steers All

All

All Models $13/hr

All All Models $15/hr

Compact Track Loaders All All Models $17/hr

48 mo. 60 mo.Excess Usage Charges

(Per Hour)Notes

Other CE

AND Aged/Used

2015 Model Year w/ less than 200 hours - see flyer

NAAll16008NHC for enhanced residual values.

2012-2015 Used Model Year: Must have less than 2000 current

hours at lease inception and age of equipment cannot exceed 8

model yrs upon lease termination. A signed, completed condition

report is required.

Type ModelAnnual Usage

(Hrs)36 mo.

Loader Backhoes


Rev 4-1-17 Lease residual values and purchase options for equipment may be adjusted (increased or decreased) dependent upon factors related to, but not limited to, equipment specifications, intended usage, customer history, number of units leased or other factors that may impact equipment values. Adjustments can occur with or without notice at any time, until the contract is signed by the customer and accepted by CNH Industrial Capital. The information contained herein is subject to final approval of CNH Industrial Capital, via the execution and approval of an Operating Lease. CNH Industrial Capital reserves all rights and remedies.

Minimum Lease Sales Price (LSP) (Capitalized Cost): $10,000 Maximum Lease Sales Price (LSP) (Capitalized Cost):

New Equipment* - 120% of DNET less sales allowances/exchange discounts & rental payments, plus PDI & PPP premiums Aged/Used Equipment - 120% of current Trade Premium Value. Maximum Residual Value:

New Equipment* - % of DNET including steel surcharge less freight and exchange discounts Aged/Used Equipment - % of the lesser of Lease Sales Price (LSP) or 110% of Trade Value Premium (TVP) Minimum Residual Value: 18% DNET = Invoice before discounts/programs, no freight or set up, less exchange * New Equipment: Units within the current model year and prior model year. For prior model year units, deduct 3% pts from the published residuals. Condition Report Requirements:

Current model year with >300 current hours Last model year with >300 current hours All other model years and all used Adding attachments to the main unit (must be listed on a separate line item as the main unit):

One bucket will be included in the RV of the main unit. Add-ons, typically included after the original invoice/DNET (i.e. couplers), are included at the RV of the main unit. Additional CNH attachment(s) and approved non-CNH attachments must use the ‘Other CE’ RV from the published matrix. Excess Residual Guaranty:

Subject to wholesale credit approval, dealers have the ability to guaranty an excess residual of up to 10% pts above the Residual % shown.


Equipment has more than 150 current hours Lease includes 5 or more like units Equipment is used in caustic applications (fertilizer, manure, salt, etc.) Equipment is used in heavy-duty applications (hammer, breaker, mining, quarry, etc.) Equipment is spec'd outside 'the normal' Annual Hour Adjustments:

For hours less than Published, contact your FSM / ASM Exception Request including detailed application information required for anything over 2500 hours per year

For assistance, contact our Leasing Resource at 1-866-330-2869

or your CNH Industrial Capital FSM / ASM

Page 23 of 25

Multi-Unit Purchase Program (3/1/2017 – 12/31/2017) ELIGIBLE CUSTOMERS: Single Legal Entity Customers, Independent/Dealer Owned Rental Yards purchasing and retaining unit(s) in a rolling 12-month period PRODUCT ELIGIBILITY

1. *Group 1 Products can use Group 1 & 2 products as qualifiers. 2. **Group 2 Products can use Group 2 products as qualifiers; they CANNOT use Group 1 units as qualifiers.

Exception: Grape Harvesters are allowed to use T4F/V, T4000F/V, TK4000, and TD4000F from Group 1 as qualifiers. 3. Trade in units or units retailed to new end customers out of rental yards do not count as qualifiers for Multi-Unit

Incentives. 4. All units receiving the Multi-Unit Incentive must meet the required retention period (days and usage hours) to avoid

being charged back. (See Dealer Policy Manual-Chapter 4 for details.) 5. Headers, loaders, implements, and attachments (i.e., Dry Box for SP.300C) purchased with an eligible base unit

receive the same discount as the base unit. They do NOT count as qualifiers. 6. Harvest Lease Return (HLR) units are NOT eligible for Multi-Unit, but DO count as qualifiers. 7. Multi-Unit is not eligible with Major Account or Bid concessions such as NJPA, NH American Ethanol Producers Club

(Growth Energy). 8. Multi-Unit is eligible with Program Protection, Published and Target programs, unless otherwise stated. 9. Multi-Unit Purchase form and Customer-signed retail invoice must be uploaded to eSettlements at time of retail

settlement-Multi-Unit form attached. See DSL# US778-CAN859 for details on using Document Upload feature. Effective March 1, 2017

*GROUP 1 PRODUCTS Number of Units Purchased Group 1 products can use Group 1 & 2 products as qualifiers. 2 3 4 5 6 7 8 9 10+

Tractors: Compacts (including WM 35/40 and Boomer 3000 CVT) PIN # 8094 4% 5% 6% 7% 8% 8% 8% 8% 8%

Tractors: Commercial Mowers/Decks, Commercial Zero-Turn-Radius (ZTR) Mowers, TK4000, T4000F/V Series, T4 F/V, and TD4040F

PIN # 8094 2% 3% 4% 5% 6% 6% 6% 6% 6%

Light CE: SSL, CTL, TL/TLB, Mini Excavators, CWL PIN # 8771 2% 3% 4% 5% 6% 6% 6% 6% 6%

Rustler Utility Vehicles PIN # 8094 2% 3% 3% 3% 3% 3% 3% 3% 3%

**GROUP 2 PRODUCTS Number of Units Purchased Group 2 products can use Group 2 products as qualifiers. Group 1 units do NOT count as qualifiers for Group 2 products. 2 3 4 5 6 7 8 9 10+ Tractors: T4000 (Excluding TK4000, T4000F/V, T4 F/V, & TD4040F-Group 1 Products Only), T4 / T5 Series, T5000, WM 45-75, TS6000, TS6.000, TD5000 Series, and PowerStar Series

PIN # 8094 2% 3% 4% 5% 6% 6% 6% 6% 6%

Tractors: T6000, T7000, T8000, T9000 Series, T6.000, T7.000, T8.000, T9.000

PIN # 8094 1% 3% 4% 5% 6% 7% 7% 7% 7%

Tractors: T8 SmartTrax, T9 with SmartTrax Attachment (MY16 and Prior)

PIN # 8094 1% 3% 4% 5% 6% 6% 6% 6% 6%

Combines: CR-CX Series Combines (Excluded headers: 76C, 88C, 92C, 94C)

PIN # 8094 1% 3% 4% 5% 6% 6% 7% 7% 7%

Grape Harvesters (Exception: T4 F/V, T4000F/V, TK4000, and TD4000F are eligible qualifiers for Grape Harvesters.)

PIN # 8094 1% 1% 2% 2% 2% 3% 3% 3% 4%

Haytools: S.P. Windrowers, Large Square Balers, S.P. Forage Harvesters

PIN # 8186 4% 5% 6% 7% 8% 8% 8% 8% 9%

Haytools: Disc Mower Conditioners, Disc Mowers, Sickle Mower Conditioners and Heads, Mega Cutters, Round Balers, and Small Square Balers

PIN # 8186 2% 3% 4% 5% 6% 6% 6% 6% 7%

S.P. Bale Wagons and TV Bidirectional Tractors PIN # 8094 1% 3% 4% 5% 6% 6% 7% 7% 7%

Crop Production: Air Drills, Air Carts, Pull-Type Sprayers PIN # 8094 2% 3% 4% 4% 4% 4% 4% 4% 4%

Guardian™ Self-Propelled Sprayers PIN # 8094 1% 2% 3% 3% 4% 4% 5% 5% 6%

Telehandlers PIN # 8094 1% 2% 2% 2% 2% 2% 2% 2% 2%

Additional Qualifiers for Group 2 Haytools: Disc Mowers, Pull-Type Forage Harvesters, Box Spreaders, Ag-Bagger: Pull-Type Models G6060/G6170; SP Commercial Model MX1012, SP Professional Model LX124. Seeding: Flexi-Coil, Kinze, Great Plains, CaseIH, Monosem, or Brillion planting equipment purchased in the past 12 months counts as qualifiers for TS6.000/T6/T6000/T7/T8/T9 tractors and combines ONLY. SP Sprayers: Miller branded SP Sprayers purchased in the past 12 months count as a qualifier for a new Guardian™ SP Sprayer purchase.

Group 1 Product Examples Group 2 Product Examples WRKM35 + 215TL + L218 all purchased at same time = 2-unit purchase discount of 4% on WRKM35 & 215TL and 2% on L218. The 215TL loader receives same discount as its base unit WRKM35.

For Dealer Owned and Independent Rental Yards: 3-T8s (current purchase) + CR (purchased 4 mos. prior now retailed to different end customer) = 3-unit purchase (3%) for 3 - T8s. CR now ineligible qualifier, because it is no longer in the rental yard.

T4000F (current purchase) + RST115 (purchased 2 mos. prior) + BC5070 (purchased 8 mos. prior) = 3-unit purchase of (3%) for the T4000F. Other 2 units are qualifiers only for this purchase.

T7 (current purchase) + Disc Mower Conditioner (current purchase) + CaseIH planting equipment (purchased 6 mos. prior) = 3-unit purchase for T7 (3%) and 2-unit purchase for Disc Mower Conditioner (2%). CaseIH model is ONLY an eligible qualifier for the T7 tractor.

Page 24 of 25

Multi-Unit Purchase Program Form

Date ________ Settling Dealer Code ________ Dealer Name ________________________ City/State/Providence___________________________ Retail Customer Name ________________________________________ City/State/Providence_________________________________________ Customer Type: □ PIN # 8094/8186/8771 (Multi-Unit Purchase Program) Current Unit(s) Settled with Multi-Unit PIN: Model Quantity Serial Number Pin# 1 2 3 4 5 6 Unit(s) previously purchased and still owned (or on order): Make Model Serial Number/VIN# Date Purchased/On Order 1 2 3 4 5 6 7 DOCUMENT UPLOAD REQUIREMENTS FOR AUDIT:

Multi-Unit Purchase Program form; completely filled in and signed by dealer Retail invoice/contract for currently settled units listed above--invoice MUST be signed by the customer.

No retail invoice required for Dealer Owned Rental Yards (DORY) units settled to CL011/Premier Rental. Legal, Multi-Customer partnerships MUST complete a Partnership Single Legal Entity form (See Dealer Portal - Forms).

*Dealer Representative Signature__________________________ Date ______________________ *Signature confirms that Multiple Unit meets the qualifications specified on the Multi-Unit Purchase Program Matrix and Dealer Policy Manuals and CONFIRMS customer is a single legal entity. See Dealer Portal - Wholegoods - Policies - Dealer Policy Manual, Chapter 4 for program details. Upload required Multi-Unit Purchase Program documentation to eSettlements at time of retail settlement. Documentation may also be uploaded after settlement. See DSL #US778-CAN859 for instructions. If documentation is not uploaded to the retail settlement, the discount(s) will be subject to chargeback. Questions: email [email protected].

Page 25 of 25

mailto:[email protected]

Date post:	07-Oct-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

April 2017 New Holland U.S. Program...

Documents