W E L D I N GS C H W E I S S E N W E L D I N GS C H W E I S S E N S C H W E I S S E N
DIX FD 200 M
„PUSH-PULL drive for MIG/MAG welding.“
► extremely compact design
► easy weld joint access
► precise and powerful 4-roll drive
► for gas- and liquid-cooled applications
► pressure system can be opend or closed without readjusting
► for PUSH-PUSH and PUSH-PULL applications
► interfaces with most common power sources
Ideal for robots with low payload!
NEW
W E L D I N GS C H W E I S S E N W E L D I N GS C H W E I S S E N S C H W E I S S E N
FD 2
00 M
10/
2016
Te
chni
cal a
nd/o
r .o
pti
cal c
hang
es a
re
sub
ject
fo
r m
od
ifica
tio
ns
DINSE front drive FD 200 M - a new system for maximum precision
With this product innovation, DINSE delivers an extremely light-weight wire feeding unit with a strong four roll drive. It ensures even more precise wire feeding. The plug and weld solution provides easy connection and simple installation.
Constant wire feed
The powerful drive system positively feeds the softest aluminum and smallest diameters - even over long distances. A stable arc is ensured. Time-consuming reworking at the weld is almost eliminated.
processes: MIG/MAG, pulse, MIG-brazing
weight: approx. 1.65 kg
wire feed speed: 0.4 - 20 m/min
materials: FE, CrNi, Al, CuSi
Easy readjustment
The pressure system can be opened and closed without requiring readjustment afterwards and avoiding accidental changes.
Flexible application
The compact dimensions ensure a wide range of use thanks to the ease compo-nent access. With its only 1.65 kg FD 200 M is ideal for robots with low bearing capacity or hollow wrist robots with low payload.
Applicable in many industries
- Automotive & vehicle industry - Machine systems and apparatus construction - Agricultural equipment - Tanks and Trailers - Heavy Equipment - Railcar - Aircraft construction - Shipbuilding
DINSE G.m.b.H. • Tarpen 36 • 22419 Hamburg • Phone: +49-(0)40 658 75-0 • Fax: -200 • [email protected] • www.dinse.eu