Product Information Sheet
1
SUITABILITY GUIDE
Aqua Reef 195, 300, 400 & 525 SERIES 2
Aquarium
The Aqua One AquaReef Series 2 range has everything you need in order for you to enjoy a slice of the coral reef in your home or workplace.
The AquaReef series 2 is a sophisticated marine system that has been rigorously designed and tested to ensure that your marine setup will run efficiently, and provide you with exceptional water quality.
Suitable for: Marine and Fresh water
Features & Benefits:
• New features compared to AquaReef Series 1:
• 1st Series has a wet/dry filter and T5 Lighting
• 2nd Series has a versatile refugium sump and LED Lighting
• High quality low iron white glass to ensure optimum clarity.
• Inbuilt filtration system eliminates unsightly piping running from outside of tank to filter unit. Comes with an Aqua One Filter Sock.
• The included LED light unit provides an energy efficient lighting solution, which enhances the colours of fish in the aquarium, whilst providing a spectrum that enhances coral growth.
• Cabinet comes assembled, and is exclusively manufactured from alloy frame and plastics, to ensure maximum resistance to salt and moisture damage normally associated with marine aquariums.
• Sump incorporates refugium section and top up reservoir.
• All plumbing is included.
YEARGUARANTEE
1+1
53439WH
53440WH
53438BK
53441BK
Product Information Sheet
Code Description
53440BK Aqua reef 195 S2 Marine Set BLACK
53440WH Aqua reef 195 S2 Marine Set WHITE
53438BK Aqua reef 300 S2 Marine Set BLACK
53438WH Aqua reef 300 S2 Marine Set WHITE
53439BK Aqua reef 400 S2 Marine Set BLACK
53439WH Aqua reef 400 S2 Marine Set WHITE
53441BK AquaReef 525 S2 Marine Set 525L BLACK
53441WH AquaReef 525 S2 Marine Set 525L WHITE
Product Description & Price
53440BK 53440WH 53438BK 53438WH 53439BK
53441BK 53441WH53439WH
2
Product Information Sheet
3
Code Description Max Aquarium Volume
OverallDimensions
Light Wattage
Pump Flow Rate Glass Thickness
53440BK AquaReef 195 195L 70 x 52 x 78 cm 40W 2200L/hr 10mm
53438BK AquaReef 300 300L 98 x 50 x 70 cm 80W 3500L/hr 10mm
53439BK AquaReef 400 400L 127 x 50 x 70 cm 95W 3500L/hr 10mm
53441BK AquaReef 525 525L 184.5 x 51.5 x 76cm 135W 4800L/hr 12mm
Technical Information
195 Flow through diagram
Code Description
25017I Impeller Set - 3600 Series 17i
50103 Replacement Filter Sock
Spare Parts 195
25014I
5010325017I
300/400/525 Flow through diagram
Code Description
25014I Impeller set – 2300 Series 14i
50103 Replacement Filter Sock
Spare Parts 300/400
Code Description
50103 Replacement Filter Sock
Spare Parts 525
© C
opyr
ight
201
6 Aq
ua O
ne
Product Information Sheet
4
NOTES, HINTS & TIPS:
• All plumbing components are already glued into place, except where threaded joints are required for assembly into the aquarium or to allow access for maintenance. Two people will be required to connect plumbing through the base of the aquarium.
• Plumbers tape is included on threaded fittings to reduce the risk of small leaks. If the aquarium needs to be disassembled and reassembled, it is recommended to replace the plumbers tape.
• Refer to the instruction manual for equipment placement diagram.
WARNING AND DISCLAIMERS:
• This product is intended for indoor use only.
• The aquarium must be installed upon a level surface and weight bearing cabinet and there upon the level and load bearing flooring. The purchaser must consider the total weight of all the items when installing an aquarium, 1L of water = 1kg of weight.
• It is important to follow the safety guidelines as set out in the instruction manual contained within the packaging of this product. This product is not intended for use by children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with aquarium parts and components.
• Do not use the product for reasons other than the intended use. The use of attachments that are not recommended or sold to the manufacturer may cause the product to be unsafe. This is not recommended.
• Do not overtighten bulkhead fittings. They should be hand tight with one o-ring on either side of the glass. Overtightening may damage fittings leading to a water leak.
• When servicing the return pump, it is recommended that the hose is disconnected at the pump end to avoid putting too much force on the return bulkhead leading to damage.
IMPORTANT INFORMATION!
For installation and set up, please refer to the instruction manual provided with the product. It is important to read and follow all instructions contained within the manual, even if you feel you are familiar with the product. Particular attention should be drawn to the sections concerning “IMPORTANT SAFEGUARDS” and “GUARANTEE CONDITIONS”.
Products to suit this range
Add some colour and life to your aquarium with Aqua One’s Copi Coral ornaments range!Aqua One’s Copi Coral ornament range brightens up any aquarium, making it the perfect addition.
View the full range of products at
www.aquaone.com.au