+ All Categories
Home > Documents > AQUILA 2 Product specifications -...

AQUILA 2 Product specifications -...

Date post: 13-Sep-2018
Category:
Upload: lelien
View: 217 times
Download: 0 times
Share this document with a friend
1
inspired.human.power. Factory 2/5 June Ave Dromana, Victoria 3936 Australia Tel: +61 3 5981 0337 Fax: +61 3 5981 4227 [email protected] www.trisled.com.au AQUILA 2 Product specifications LENGTH: WIDTH: HEIGHT: WEIGHT: TURN CIRCLE: GROUND CLEARANCE: FRAME: FAIRING: SEAT: SEAT PAD: BRAKES: GEARING: CRANKS: TYRES: WHEELS: STEERING: PRICE: OPTIONAL EXTRAS: ORDER NOW: IMPORTANT INFORMATION: Aquila 2 is for teams seriously committed to HPV racing. A small but roomy compartment means you have all the ingredients on hand to go seriously fast! Aquila's Kevlar/Composite vacuum-infused body with built-in roll frames makes this model one of the toughest, lightest and most durable racing HPVs available. The Trisled Racing Team has been racing Aquila since 2010, achieving impressive results. You can be sure that the speed improvements we've made over the years will be included in your vehicle! We’ve made some significant improvements to the fairing and chassis to improve the cornering speed. Now supplied as standard with a replaceable nose cone section, allowing the front to be replaced if necessary after significant damage. 2700MM 770MM 800MM 26KG 8M 50MM AIRCRAFT SPEC 4130 CHROMIUM MOLYBDENUM ALLOY; MIG WELD; POWDER-COATED VACUUM-INFUSED KEVLAR/COMPOSITE WITH BUILT-IN ROLL BARS LONG-BASE CARBON FIBER WITH SEAT-BELT MOUNTS BACTERIA RESISTANT OPEN-CELL FOAM CABLE OPERATED DISC 9 SPEED SHIMANO 105 DERAILLEUR 155MM RHYTHM CRANKS SCHWALBE KOJAK - FRONT, DURANO - REAR FRONT 349MM (16"); REAR 406MM (20") TRISLED 'ALL-IN-ONE' TWO HAND STEERING AND BRAKING AU$9990 FOR RACE-READY ACCESSORIES AND PARTS, SUCH AS MIRRORS, LIGHTS, SPARE WHEELS AND TYRES, PLEASE VISIT OUR ONLINE STORE. TO ORDER, SEND US A SCHOOL PURCHASE ORDER OR EMAIL WITH YOUR PREFERRED COLOUR CHOICE. A DEPOSIT MAY BE REQUIRED WHEN YOU PLACE YOUR ORDER. DELIVERY TIMES MAY VARY DEPENDING ON CURRENT ORDERS.CONTACT US FOR A DELIVERY ESTIMATE. ALL PRICES INCLUDE GST. BUILT WITH PASSION All Trisled racing vehicles are built at our factory on the Mornington Peninsula by people who race HPV’s. New models are tested by our racing team for 6-12, months before we release them to ensure reliablilty, durability and performance. Aquila 2 is a racing HPV and is not suitable for road use. Scrutineering requirements for this vehicle differ between races and are subject to change. While Trisled makes every effort to ensure that our racing models are compliant with Australian HPV racing regulations, we cannot guarantee that our machines will meet scrutineering requirements. “Trisled” is a registered Trademark in Australia owned by Ben’s Big Ideas Pty Ltd. © 2016 Ben’s Big Ideas Pty Ltd trading as Trisled. All rights reserved.
Transcript
Page 1: AQUILA 2 Product specifications - Trisledtrisled.com.au/wp-content/uploads/2016/03/TRI0026_Aquila_Specs... · aquila 2 product specifications length: width: height: weight: turn circle:

inspired. human. power.

Factory 2/5 June Ave Dromana, Victoria 3936 Australia Tel: +61 3 5981 0337 Fax: +61 3 5981 4227 [email protected] www.trisled.com.au

AQUILA 2Product specifications

LENGTH:WIDTH:HEIGHT:WEIGHT:TURN CIRCLE:GROUND CLEARANCE:

FRAME:FAIRING:SEAT:SEAT PAD:BRAKES:GEARING:CRANKS:TYRES:WHEELS:STEERING:

PRICE:

OPTIONAL EXTRAS:

ORDER NOW:

IMPORTANT INFORMATION:

Aquila 2 is for teams seriously committed to HPV racing.

A small but roomy compartment means you have all the ingredients on hand to go seriously fast! Aquila's Kevlar/Composite vacuum-infused body with built-in roll frames makes this model one of the toughest, lightest and most durable racing HPVs available.

The Trisled Racing Team has been racing Aquila since 2010, achieving impressive results. You can be sure that the speed improvements we've made over the years will be included in your vehicle!

We’ve made some significant improvements to the fairing and chassis to improve the cornering speed. Now supplied as standard with a replaceable nose cone section, allowing the front to be replaced if necessary after significant damage.

2700MM770MM800MM26KG8M 50MM

AIRCRAFT SPEC 4130 CHROMIUM MOLYBDENUM ALLOY; MIG WELD; POWDER-COATEDVACUUM-INFUSED KEVLAR/COMPOSITE WITH BUILT-IN ROLL BARSLONG-BASE CARBON FIBER WITH SEAT-BELT MOUNTSBACTERIA RESISTANT OPEN-CELL FOAMCABLE OPERATED DISC 9 SPEED SHIMANO 105 DERAILLEUR155MM RHYTHM CRANKS SCHWALBE KOJAK - FRONT, DURANO - REAR FRONT 349MM (16"); REAR 406MM (20")TRISLED 'ALL-IN-ONE' TWO HAND STEERING AND BRAKING

AU$9990

FOR RACE-READY ACCESSORIES AND PARTS, SUCH AS MIRRORS, LIGHTS, SPARE WHEELS AND TYRES, PLEASE VISIT OUR ONLINE STORE.

TO ORDER, SEND US A SCHOOL PURCHASE ORDER OR EMAIL WITH YOUR PREFERRED COLOUR CHOICE. A DEPOSIT MAY BE REQUIRED WHEN YOU PLACE YOUR ORDER. DELIVERY TIMES MAY VARY DEPENDING ON CURRENT ORDERS.CONTACT US FOR A DELIVERY ESTIMATE. ALL PRICES INCLUDE GST.BUILT WITH PASSION

All Trisled racing vehicles are built at our factory on the Mornington Peninsula by people who race HPV’s. New models are tested by our racing team for 6-12, months before we release them to ensure reliablilty, durability and performance. Aquila 2 is a racing HPV and is not suitable for road use. Scrutineering requirements for this vehicle differ between races and are subject to change. While Trisled makes every effort to ensure that our racing models are compliant with Australian HPV racing regulations, we cannot guarantee that our machines will meet scrutineering requirements. “Trisled” is a registered Trademark in Australia owned by Ben’s Big Ideas Pty Ltd. © 2016 Ben’s Big Ideas Pty Ltd trading as Trisled. All rights reserved.

Recommended