AR32.30-P-0620A Rear hydraulic suspension pressure accumulator, removal and installation 1.4.10
MODEL 140, 210with CODE (217a) Self-levelling suspension on rear axle with ADSwith CODE (480) Level control system at rearMODEL 202, 203.2, 208 with CODE (480) Level control system at rear
Model Series 140
A Hydraulic suspension pressure accumulator layout on right of vehicles with Code 480
B Layout of hydraulic suspension pressure accumulator on right side of vehicles with Code 217a
P32.30-0216-06
Model Series 202, 208
P32.30-0218-06
Page 1 of 4© Daimler AG, 1/13/13, G/11/12, ar32.30-p-0620a, Rear hydraulic suspension pressure accumulator, removal and installationMODEL 140, 210 with CODE (217a) Self-levelling suspension on rear axle with ADS with CODE (480) Level control system at rear MODEL 202, 203.2, 208 with CODE (480) Level control system at ...
Model Series 210.0
A Layout of hydraulic suspension pressure accumulator on left of vehicles with Code 480
B Layout of hydraulic suspension pressure accumulator on left of vehicles with Code 217a
P32.30-0236-06
Model Series 210.2, 210.6
P32.30-0270-06
Page 2 of 4© Daimler AG, 1/13/13, G/11/12, ar32.30-p-0620a, Rear hydraulic suspension pressure accumulator, removal and installationMODEL 140, 210 with CODE (217a) Self-levelling suspension on rear axle with ADS with CODE (480) Level control system at rear MODEL 202, 203.2, 208 with CODE (480) Level control system at ...
Model 203.2
P32.30-2031-06
Removing, installation notes
Risk of injuryDanger! to skin or eyes from Render the hydraulic system pressureless AS00.00-Z-0013-01Ahydraulic fluid spraying out under pressure. before commencing work on system. Wear Risk of poisoning from swallowing protective clothing and eye protection.hydraulic fluid.
1 Drain hydraulic system AR32.30-P-0630AInstallation: Recharge hydraulic system
General notes for working on vehicles with All models with Code 216b, 216c, 217a, 480 AH32.00-P-0002-01Alevel control / ADS
2 Disconnect pressure lines (S1, P4) from *BA32.30-P-1001-02Aspring actuator
*BA32.30-P-1002-02A
*116589001700
3 Remove the exhaust system from the Model Series 140brackets mounted on the floorpan and attach When removing hydraulic suspension it to a hook to prevent it from tilting pressure accumulator on left side
4 Remove paneling in trunk on left Model Series 202, 208
When removing hydraulic suspension pressure accumulator on left side
5 Remove spare tire cover Model 210.0
Remove hydraulic suspension pressure
accumulator by extracting through the luggage compartment
6 Remove both rear wheelhousing liners
7 Unscrew self-locking nuts (4f) and remove Model Series 202, 208: Remove left-side hydraulic suspension pressure accumulator hydraulic suspension pressure accumulator (4) through the luggage compartment.
8 Remove covers for left and right-side Model 203.2storage compartments
9 Remove bracket for on-board tool kit Protect luggage compartment against dirt
Model Series 203.2: Remove left and right-side hydraulic suspension pressure accumulators through the luggage compartment.Mount rubber spacer (arrow) on both hydraulic suspension pressure accumulators
Model Series 202, 208: Install rubber spacer (arrow) on left hydraulic suspension
pressure accumulator.
10 Reverse the removal sequence to install Installation:Replace self-locking nuts
Drilling into gas-filled assemblies and Wear safety glasses and face mask. AS00.00-Z-0006-01ADanger!components represents a potential injury hazard (the gas itself is not flammable)
11 Dispose of hydraulic suspension pressure accumulator through approved channels
OS32.30-P-0620-01A
Page 3 of 4© Daimler AG, 1/13/13, G/11/12, ar32.30-p-0620a, Rear hydraulic suspension pressure accumulator, removal and installationMODEL 140, 210 with CODE (217a) Self-levelling suspension on rear axle with ADS with CODE (480) Level control system at rear MODEL 202, 203.2, 208 with CODE (480) Level control system at ...
Rear hydraulic suspension pressure accumulator
Number Designation Model Series Model Series 140 with ride- 202 with ride-height control/ height control
ADS
BA32.30-P-1001-02A High-pressure supply line, self-leveling suspension/ADS M10 1 NM 14 14
on hydraulic suspension pressure accumulator (reference figure)
M16 1.5 NM 30 30
BA32.30-P-1002-02A Supply line banjo bolt, for self-leveling suspension NM - 50hydraulic pressure accumulator on left side
Rear hydraulic suspension pressure accumulator
Number Designation Model Series Model Series 203.2 with self- 208 with ride-leveling height control
suspension
BA32.30-P-1001-02A High-pressure supply line, self-leveling suspension/ADS M10 1 NM 14 14on hydraulic suspension pressure accumulator (reference figure)
M16 1.5 NM 30 30
BA32.30-P-1002-02A Supply line banjo bolt, for self-leveling suspension NM 50 50hydraulic pressure accumulator on left side
Rear hydraulic suspension pressure accumulator
Number Designation Model 210 with level control /
ADS
BA32.30-P-1001-02A High-pressure supply line, self-leveling suspension/ADS M10 1 NM 14
on hydraulic suspension pressure accumulator (reference figure)
M16 1.5 NM 30
116 589 00 17 00
Box-end wrench
Page 4 of 4© Daimler AG, 1/13/13, G/11/12, ar32.30-p-0620a, Rear hydraulic suspension pressure accumulator, removal and installationMODEL 140, 210 with CODE (217a) Self-levelling suspension on rear axle with ADS with CODE (480) Level control system at rear MODEL 202, 203.2, 208 with CODE (480) Level control system at ...