Aramco Asia Korea Limited - Saudi Aramco · product shall conform to saudi aramco export packing...

Material Sourcing List

Region 5: Republic of Korea

5

Item Category Material Description Material Long DescriptionMaterial Number

9COM/9CAT

1Chemicals

(Drilling Fluids)

POLYVINYL/POLYACRYLIC

COMPOUNDS TO 400F

ADMIXTURE: DRILLING MUD; 25 KG PAPER SACKS; SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; POWDER

FORM,POLYACRYLIC,FOR FILTRATE REDUCER FLUID LOSS ADDITIVE,CO-POLYMER

OF POLYVINYL COMPOUNDS,25 KG OR 50 LB BAG,API 13A,HIGH TEMPERATURE

ENVIRONMENT 150 DEG C (300 DEG F) TO 205 DEG C (400 DEG F), SHIPMENT OF

PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL

NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER)

SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN. NATURAL KRAFT PAPER (INTERIOR

PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE INNER BAG

LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR

SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL

THICKNES OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB

MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE

VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF.

1000021602

Aramco Asia Korea Limited18F, Seoul Finance Center

136 Sejong-Daero, Jung-Gu,

Seoul 100-768, Korea

Phone: +82 (2) 6270-5555

Fax: +82 (2) 6270-5592

Email: [email protected]

2015 1Saudi Aramco: Company General Use




9COM/9CAT

2Chemicals

(Drilling Fluids)LIQUID GILSONITE

GILSONITE: LIQUID GILSONITE; BORE HOLE STABILIZING AND FLUID LOSS

CONTROL AGENT ADMIXTURE DRILLING MUD; BLEND OF DISPERSED COUPLED

GILSONITE AND LIGNITE FORM,SUSPENDED SURFACTANT LIQUID,FOR BOREHOLE

STABILIZING, AND FLUID LOSS CONTROL AGENT PRIMARY FUNCTION IS TO

PREVENT STUCK PIPE, REDUCE FLUID LOSS AND CREATE STRONG BOREHOLE

CONDITIONS WITH EXCEPTIONAL HTHP AND DYNAMIC FLUID LOSS CONTROL,

NON- TOXIC, ENVIRONMENTALLY SAFE ALSO FUNCTIONS AS A SHALE STABILIZER

AND HAS A BROAD PSD FOR SEALING MICRO- FRACTURES. NON SHEENING,55

GAL/DRUM,APPEARANCE, BLACK SUSPENSION.FREEZING POINT, -4 F(-20 C)TO -13

F(-25C). FLASH POINT,F, >200. SOLUBILITY IN WATER, MISCIBLE. LUBRICITY TEST,

TORQ REDUCTION :5% AND 12% AT 4 PPB RESPECTIVELY IN STANDARD SAUDI

ARAMCO WATER BASE MUD SYSTEM, USING OFI MODEL EP/LUBRICITY TESTER.

FILTRATION CONTROL, API FILTRATE LOSS:6.0 ML/30MIN AT 4PPB HTHP FILTRATE

LOSS AT 250 F AND 500 PSI:16 ML/30MIN AT 8PPB SHALE ACCRETION TEST, <5%

IN STANDARD SAUDI ARAMC KCL POLYMER MUD. AT 8 PPB IN STANDARD KCL

POLYMER MUD:1. IMPROVE HTHP FLUID LOSS: 20% MINIMUM AT 250 F AND 500

PSI 2. IMPROVE LUBRICITY: 15% MINIMUM, BY USING OFI MODEL EXTREME

PRESSURE (PE)/LUBRICITY TESTER 3. SHALE ACCRETION TEST, <5%.

1000021608





9COM/9CAT

3Chemicals

(Drilling Fluids )

RESINATED LIGNITE STABLE TO

204 deg C

ADMIXTURE: DRILLING MUD; 25 KG (50 LB) SACK; SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; DRY

POWDER FORM,MODIFIED RESINATED LIGNITE DARK BROWN POWDER,FOR

WATER SOLUBLE FILTRATE REDUCER FOR FLUID LOSS CONTROL AND RHEOLOGY

STABILIZER IN HIGH TEMP WATER BASED MUD WELLS,25 KG OR 55 LB BAG,SG:

1.32-1.35, COMPATIBLE USE WITH LIGNOSULFONATE AND LIGNITES,

MAGNESIUM AND CHLORIDE, NORMAL TREATMENT:2-6 LB/BBL FOR FLUID LOSS

CONTROL AT TEMPERATURE APPROACHING 400 DEG F (204 DEG C),THE

SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING

MANUAL NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG

(CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN. NATURAL KRAFT PAPER

(INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE

INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER

LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A

MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT

PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR

PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE

AND WATER PROOF.

1000021675

4Chemicals

(Drilling Fluids)ZINC OXIDE

ADMIXTURE: DRILLING MUD; 50 LB BAG; ADMIXTURE DRILLING MUD; FINE

POWDER FORM,ZINC OXIDE (ZNO), 90% (MINIMUM) PURE, SP. GR.,5.5,FOR

HYDROGEN SULFIDE SCAVENGER FOR DRILL PIPE CORROSION PROTECTION IN

FRESH WATER OR BRINE FOR DRILLING & COMPLETION OPERATIONS,25 KG OR 55

LB BAGS,API 13A.

1000021671

5Chemicals

(Drilling Fluids)MUTUAL SOLVENT

AGENT: WELL STIMULANT; SURFACE TENSION REDUCER; SOLUBLE IN

HYDROCARBONS; DISPERSIBLE IN FRESH AGENT WELL STIMULANT; FOR SURFACE

TENSION REDUCER FOR HYDROFLUORIC ACID SOLUTION ADDITIVES,ETHYLENE

GLYCOL MONOBUTYL ETHER MUTUAL SOLVENT,LIQUID FORM,55 GAL

DRUM,SOLUBLE IN HYDROCARBONS, DISPERSIBLE IN FRESH WATER, ACID &

BRINE, 150 DEG F FLASH POINT (TOC).

1000021973





9COM/9CAT

6Chemicals

(Drilling Fluids )AMINE CORROSION INHIBITOR

INHIBITOR: CORROSION; 55-GAL DRUM. INHIBITOR; 55 GAL DRUM,A BLEND OF

AMINES AND IMADAZOLINES FUNCTION GROUPS, OIL SOLUBLE /WATER

DISPERSIBLE CORROSION INHIBITOR, AMINE BASEDAMINE BASED,

RECOMMENDED FOR USE IN HIGH TEMPERATURE, HIGH PRESSURE

ENVIRONMENTS UP TO 350-400 DEG F PROVIDES EXCELLENT CORROSION

PROTECTION IN SOUR H2S, OR SWEET CO2 OIL AND GAS WELLS. DISPERSIBLE IN

FRESH, BRACKISH OR BRINE WATER. PACKER FLUID AND CORROSION INHIBITOR.

1000022135

7Chemicals

(Drilling Fluids )LOW TOXICITY BASED OIL

KEROSENE, LOW TOXICITY, ODORLESS ADDITIVE DRILLING FLUID; CLEAR LIQUID,

FREE FROM SUSPENDED MATTER FORM,KEROSENE, LOW TOXICITY, ODORLESS

BASE OIL ADDITIVE,FOR AA OIL-BASED DRILLING FLUIDS,LOW AROMATIC

OIL,BULK DELIVERY,LOW TOXICITY OIL COMPATIBLE WITH ALL OIL-BASED

DRILLING FLUIDS ADDITIVES (EMULSIFIERS, ORGANOPHILIC CLAYS, AND FILTRATE

CONTROL AGENTS) SPECIFIC GRAVITY @ 15 DEG C .77- 79 (ASTM D 1298), FLASH

POINT: MORE THAN 185 DEG F (85 DEG C) (ASTM D 93), ANILINE POINT: MORE

THAN 167 DEG F (75 DEG C) (ASTM D 611), TOTAL AROMATICS: LESS THAN . 5%

VOL (ASTM D 1319), OLEFINS CONTENT: NIL PPM, BENZENE CONTENT: NIL PPM,

POLYNUCLEAR AROMATIC: NIL PPM, LC50: MORE THAN 100000 PPM. (MYSID

SHRIMP NINETY-SIX HOUR BIOASSAY TEST).

1000022138

8Chemicals

(Drilling Fluids)THINNER OBM

ADDITIVE DRILLING FLUID; LIQUID FORM,POLYOLEFIN/ORGANIC SULFONATE

BLEND, FATTY ACID DERIVATIVES OR OTHER CHEMICAL THAT DO SAME

FUNCTION.,FOR TO LOWER REHEOLOGICAL PROPERTIES FOR SYNTHETIC OR OIL

BASE FLUIDS.,55 GALLON DRUM,APPEARANCE: AMBER LIQUID, COLOUR: DARK

AMBER, ODOUR/TASTE: SLIGHT, S.G: 0.9-0.96, INSOLUBLE, FLASH POINT: MORE

THAN 190 F DEG.

1000823699

9Chemicals

(Drilling Fluids)OIL WETTING AGENT

ADMIXTURE, DRILLING MUD: INVERTED EMULSION MUD COMPONENTS,

DRILTREAT (STABILIZER), AMBER-COLOR VISCOUS ADMIXTURE DRILLING MUD;

VISCOUS LIQUID, AMBER COLOR FORM,ORGANIC SURFACTANT OIL-WETTING

AGENT,FOR OIL BASE MUDS,5 GAL /PAIL,AN ORGANIC SURFACTANT OIL-WETTING

AGENT FOR OIL BASE MUDS. ITS PRIMARY FUNCTION IS TO ACT AS AN OIL-WET

WEIGHTING MATERIAL AND DRILL SOLIDS TO PREVENT WATER WET SOLIDS, TO

IMPROVE FILTERATION CONTROL, RHEOLOGICAL STABILITY AND EMULSION

STABILITY. NORMAL TREATMENTS RANGE 0.25 û 2.0 LBS/BBL DIRECTLY TO THE

SYSTEM AND IT IS TEMPERATURE STABLE GREATER THAN 350 DEG F (176 DEG C).

PHYSICAL APPEARANCE: AMBER COLOR, VISCOUS LIQUID. SG: 0.93 û 1.0. FLASH

POINT: > 200 DEG F (93 DEG C) BY PMCC.

1000022171





9COM/9CAT

10Chemicals

(Drilling Fluids)ORGANOPHILIC LIGNITE

ADMIXTURE, DRILLING MUD: INVERTED EMULSION MUD COMPONENTS OIL-

DISPERSIBLE ORGANOPHILIC LEONARDITE 25 KG (50 LB) ADMIXTURE DRILLING

MUD; 25 KG (55 LB) BAG,INVERTED EMULSION MUD COMPONENTS, OIL-

DISPERSIBLE ORGANOPHILIC LEONARDITE, 25 KG (55 LB) BAG: MOISTURE GRATER

THAN 8% WT. PARTICLE SIZE 100% WT PASSING THROUGH 70 US MESH

IMPURITIES (SAND, LIME, GYPSUM-..ETC) 2% WT, MAX.

1000022172

11Chemicals

(Drilling Fluids)SECONDARY EMULSIFIER


POLYAMINATED FATTY ACID & PARTIAL AMIDE OF ADMIXTURE DRILLING MUD;

BLEND OF POLYAMINATED FATTY ACID & PARTIAL AMIDE OF POLYAMINE WITH

METHANOL,FOR SECONDARY EMULSIFIER AND WETTING AGENT FOR INVERTED

EMULSION DRILLING FLUIDS,55 GAL PER DRUM,SECONDARY EMULSIFIER AND

WETTING AGENT FOR INVERTED EMULSION DRILLING FLUIDS. A BLEND OF

POLYAMINATED FATTY ACID AND PARTIAL AMIDE OF POLYAMINE WITH

METHANOL, AUTHORIZED SAUDI ARAMCOÆS PERSONNEL WILL CARRY OUT

SAMPLING AND TESTING AS NEEDED. SPECIFIC GRAVITY @ 77 DEG F (25 DEG C)

0.95 - 0.96 FLASH POINT: HIGHER THAN 149 DEG F (65 DEG C) ACTIVE

INGREDIENTS: A. FATTY ACID & AMINE DERIVATIVES 65 - 70% B. ASPHALTIC-TYPE

MATERIAL NONE C. ACID NUMBER, 45 - 50 MG KOH/G.

1000022173

12Chemicals

(Drilling Fluids)PRIMARY EMULSIFIER


OXIDIZED TALL OIL & POLYAMINATED FATTY ACID, CLEAR, ADMIXTURE DRILLING

MUD; CLEAR FORM,A BLEND OF OXIDIZED TALL OIL AND POLYAMINATED FATTY

ACID,FOR PRIMARY EMULSIFIER FOR INVERTED EMULSION DRILLING FLUIDS,55

GAL PER DRUM,SPECIFIC GRAVITY @ 77 DEG F (25 DEG C) 0.94 - 0.95 FLASH

POINT: HIGHER THAN 149 DEG F (65 DEG C) ACTIVE INGREDIENTS: A: OXIDIZED

TALL OIL & FATTY ACID 65 - 70% B: ASPHALTIC-TYPE MATERIAL NONE C: ACID

NUMBER, 80 - 85 MG KOH/G.

1000022175

13Chemicals

(Drilling Fluids)LIQUID SPOTTING FLUID

ADMIXTURE, DRILLING MUD: INVERTED EMULSION MUD COMPONENTS, TO FREE

STUCK PIPES (EMULSIFIER), SPECIAL BLEND OF LIQUID, ADMIXTURE DRILLING

MUD; LIQUID FORM,SPOTTING FLUID,FOR SOAK SOLUTION FOR FREEING STUCK

PIPE,ORGANIC CHEMICAL CONCENTRATE OF EMULSIFIERS AND LUBRICANTS,208

L OR 55 GAL DRUM,CONCENTRATE TO BE MIXED WITH DIESEL OIL OR MINERAL

OIL TO FORM STABLE INVERT EMULSION TO HELP FREE DIFFERENTIALLY STUCK

PIPE. FLASH POINT: >190 DEG F.

1000022178





9COM/9CAT

14Chemicals

(Drilling Fluids)FIBER, SWEEPING AGENT

ADMIXTURE: DRILLING MUD; WELLBORE CLEANING AGENT DRY PILLS, TREATED

POLYMERIZED SYNTHETIC FIBER; HOLE CLEANING AGENT ADMIXTURE DRILLING

MUD; DRY FORM,TREATED SYNTHETIC POLYPROPYLENE FIBER,FOR

TRANSPORTING DRILL CUTTINGS METAL SHAVINGS AND OTHER DEBRIS OUT OF

WELLBORE WHILE DRILLING,15 LBS PAIL,EASILY DISPERSABLE IN ALL DRILLING

FLUIDS, NON TOXIC, NON-CORROSIVE, NON-MAGNETIC, CHEMICALLY INERT AND

TEMPERATURE STABLE. COMPATIBLE IN WATER, DIESEL AND MINERAL OIL

FLUIDS. SPECIFIC GRAVITY, 0.9.

1000720919

15Chemicals

(Drilling Fluids)

LUBRICANT - HIGH PH AND

DIVALENT BRINES

ADMIXTURE DRILLING MUD; CLEAR LIQUID FORM,WATER SOLUBLE

LUBRICANT,FOR REDUCES TORQUE, DRAG AND FRICTION IN WATER BASED

DRILLING MUDS,ND OF SURFACTANT MIXTURES POLYOLS DESIGNED FOR USE AS

MIUM LUBRICANT COMPATIBLE IN HIGH SALINE FLUIDS INCLUDING SATURATED

NACL, KCL, NABR, K-FORMATE CALCIUM CHLORIDE FLUIDS WITHOUT GREASING

OUT AND/OR CHEESING. STABLE OVER WIDE RANGE OF TEMPERATURE UP TO

325 F DEG. THE NORMAL (PMCC).

1000757580

16Chemicals

(Drilling Fluids)

LUBRICANT SALT WATER MUD

AND BRINE

LUBRICANT; DRILLING MUD, ADDITIVE TYPE,AMBER LIQUID FORM,55

GAL/DRUM,LUBRICANT FOR SALT WATER BASED MUD AND BRINES, DISPERSED,

SEA WATER, SALT SATURATED, FORMATS, COMPLETION, WORKOVER FLUIDS.

USED WITH BRINES, ALSO, RECOMMENDED FOR DRILL-IN FLUIDS CONTAINING

HIGH AMOUNT OF SIZEABLE CALCIUM CARBONATE, SODIUM CHLORIDE OR

CALCIUM CHLORIDE.PHYSICAL STATE @ 20 C DEG: AMBER COLOR, FAINT ODOR,

POUR POINT IS -10 C DEG MAX, SP. GR. 1.002 G/CC, VISCOSITY @ 40 C DEG IS 120

MM2/S, FLASH POINT 230 C DEG, INSOLUBLE IN WATER, DOES NOT FORM

GREASING AND IT DOES NOT PHASE OUT. BOTTOM HOLE TEMP. LIMIT: 160 C

DEG(320 F), PH LIMIT MAX 10.5, REDIAGREEN EME SALT IS A MIXTURE OF FATTY

ACID, C1618 AND C18-UNSATURATED COMPOUNDS WITH 2,2,2-NITRILOTRI-

ETHANOL AND FATTY ACIDS, ESTERS WITH POLYOL. OTHER ASSOCIATED

ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY

AFFECTED FLUID PROPERTIES.

1000774613

17Chemicals

(Drilling Fluids)OIL IN WATER EMULSIFIER

ADMIXTURE DRILLING MUD; THICK LIQUID FORM,FOR EFFECTIVELY EMLSIFIES

HYDROCARBONS IN BOTH FRESH & SALT WATER. USE IN LOW DENSITY OIL IN

WATER BENTONITE MUD EMULSION,55 GAL (208 LITER) DRUM,OTHER

ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR

ADVERSELY AFFECT FLUID PROPERTIES.

1000779780





9COM/9CAT

18Chemicals

(Drilling Fluids)MODIFIED NON-IONIC STARCH

ADMIXTURE DRILLING MUD; WHITE, FREE-FLOWING POWDER FORM,STABILIZED

NON-IONIC STARCH DERIVATION,FOR TO CONTROL HIGH PRESSURE AND HIGH

TEMPERATURE FILTRATION CONTROL AND MINIMIZE DAMAGE TO THE

PRODUCTIVE FORMATION,MODIFIED STARCH 60-100%, SOLID, WHITE, SG 1.5,

STABILITY TEMPERATURE: 250 DEG F, BIODEGRADABLE, SOLUBLE IN WATER,50 LB

(22.7 KG) SACK,ENHANCES THE LOW SHEAR RATE VISCOSITY OF A FLUID

CONTAINING XANTHAN GUM BIO-POLYMER. POLYMER COMBINATION IS

SYNERGISTIC AND YIELDS IMPROVED STATIC SUSPENSION. FLUID COMPOSITIONS

MIXED WITH N-DRIL HT PLUS FILTRATION CONTROL AGENT CAN BE USED TO

DRILL INTO PAY ZONES AND UNDER REAM. IT CAN ALSO BE USED AS 'PRE' AND

'POST' GRAVEL PACK FLUID AND AS LOST CIRCULATION PILLS. SUITABLE FOR ALL

WATER-BASED DRILLING FLUIDS, WORKOVER AND COMPLETION FLUIDS

INCLUDING SEAWATER, POTASSIUM CHLORIDE, MAGNESIUM CHLORIDE SODIUM

CHLORIDE, SODIUM BROMIDE, CALCIUM BROMIDE AND ZINC BROMIDE: RESISTS

CALCIUM CONTAMINATION OVER A WIDE PH RANGE, SOLUBLE IN ACIDS AND

OXIDIZERS CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,

MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER.

1000788390

19Chemicals

(Drilling Fluids)

CALCIUM CARBONATE FLAKE

FINE

ADMIXTURE DRILLING MUD; FINE WHITE FLAKES FORM,SIZED CALCIUM

CARBONATE FLAKES,FOR USED AS BRIDGING AGENT TO CONTROL DRILLING

FLUID CIRCULATION LOSSES ESPECIALLY IN GAS DRILLING,CALCIUM CARBONATE

60-100 WT% AND CRYSTALLINE SILICA UP TO 0.1 WT%,MULTI-WALLED 50 LB PER

BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY(10-15% HCL)99%

MIN.

1000813534

20Chemicals

(Drilling Fluids)


MEDIUM

ADMIXTURE DRILLING MUD; MEDIUM WHITE FLAKES FORM,SIZED CALCIUM




BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY(10-15% HCL)99%

MIN.

1000813690

21Chemicals

(Drilling Fluids)


COARSE

ADMIXTURE DRILLING MUD; COARSE WHITE FLAKES FORM,SIZED CALCIUM




BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY (10-15% HCL) 99%

MIN.

1000813535





9COM/9CAT

22Chemicals

(Drilling Fluids)

TEMPERATURE

EXTENDER/STABILIZER

ADDITIVE DRILLING FLUID; LIQUID FORM,AMINOETHANOL,FOR POLYMER

TEMPERATURE EXTENDER/STABILIZER FOR WATER BASED DRILLING AND

COMPLETION FLUIDS BY REDUCING THE RATE OF BREAKDOWN OF POLYMERS BY

SLOWING/PREVENTING THE THERMAL DEGRADATION OF THE POLYMERS. THIS

GIVES A PRONOUNCED IMPROVEMENT IN TEMPERATURE STABILITY, ENABLING

POLYMER FLUIDS TO BE USED IN HOTTER WELLS. THE TEMPERATURE STABILITY

INCREASE BY MARGIN OF UP TO 70 DEG F. IT IS PARTICULARLY SUITED FOR USE IN

DRILLING, COMPLETION, WORKOVER AND PACKER FLUIDS.,55 GAL PER

DRUM,PPEARANCE: LIQUID COLOUR : COLORLESS GRAVITY :1.0- 1.02 ADD

SOLUBILITY IN WATER: SOLUBLE IN WATER BOILING POINT (C):> 142 C FLASH

POINT (C) : > 96 C PH : 11-12,CONTAINER MUST BE PROPERLY LABELED WITH

VENDOR'S NAME, MANUFACTURER'S NAME, GRAVITY: 1.0 - 1.02 LOCATION,

PRODUCTION DATE AND BATCH NUMBER. SAUDI SOLUBILITY IN WATER:

ARAMCO'S PERSONNEL WILL SOLUBLE IN WATER, BOILING CARRY OUT PROPER

SAMPLING POINT: > 142 DEG C, FLASH AND TESTING AS NEEDED. POINT: > 96

DEG C, PH: 11 - 12.

1000829739

23Chemicals

(Drilling Fluids)Temperature Stabilizer

ADDITIVE; DRILLING MUD TYPE,FOR FREE RADICAL SCAVENGER AND

TEMPERATURE STABILIZER,COLORLESS LIQUID FORM,200

LITERS/DRUM,FUNCTIONS BY SCAVENGING FREE RADICALS AND SLOWS DOWN

THERMAL DEGRADATION OF POLYMERIC COMPONENTS, SUCH AS XANTHAN

GUM, PAC AND STARCH, IN THE DRILLING FLUID WHICH ALLOWING THE

TEMPERATURE STABILITY TO BE EXTENDED BY UP TO 50 DEG F. NORMAL

TREATMENT: 2.0 TO 4.0 LB/BBL FLASH POINT : > 195 DEG. F, SPECIFIC GRAVITY :

1.05-1.15, SOLUBILITY : SOLUBLE IN WATER, ACTIVES % W/W 68 - 72, SG @ 20° C

1.05 - 1.15.

1000823316

24Chemicals

(Drilling Fluids)

POLYSTYRENE COPOLYMER

BEADS

ADMIXTURE: DRILLING MUD; DRY, LUBRA-GLIDE BEADS; DIVINYL BENZENE

COPOLYMER; DRY, COARSE GRADE; FOR REDUCING TORQUE AND DRAG.

ADMIXTURE DRILLING MUD; DRY, COARSE FORM,AA POLYSTYRENE COPOLYMER

BEAD,FOR SOLID LUBRICANT, TO REDUCE TORQUE AND DRAG WHILE DRILLING.

CHEMICALLY INERT,22.7 KGS (55 LBS) /SACK,PARTICLE SIZE DISTRIBUTION RANGE:

100 TO 1000 MICRON. COMPRESSIVE STRENGTH: 16,000 PSI. SOFTENING

TEMPERATURE: > 260 C DEG.

1000720918





9COM/9CAT

25Chemicals

(Drilling Fluids)

GUAR GUM POWDER FORM 25

KG BAG

ADDITIVE DRILLING FLUID; CREAMY COLOURED POWDER FORM,PURE GUAR

GUM,FOR USED AS COMPETITIVE SUPPLEMENTARY VISCOSIFIER FOR QUICK

VISCOSITY SWEEPS BUILDER WHILE DRILLING SURFACE HOLES WITH WATER.,25

KG METAL BAGS,IT IS PARTICULARLY USEFUL FOR OFFSHORE DRILLING, AS IT CAN

BE ADDED DIRECTLY TO SEAWATER, , WHICH ELIMINATES THE NEED FOR LARGE

QUANTITIES OF FRESH WATER AS WELL AS THE TIME REQUIRED TO PREHYDRATE

BENTONITE. IT IS AN UNTREATED GUAR GUM AND IS NON-IONIC IN NATURE. IT

SHOWS EXCELLENT PERFORMANCE OVER A WIDE PH RANGE. IT'S

RECOMMENDED TO ADD BIOCIDE, IF GUAR GUM SOLUTION KEPT OVER A PERIOD

OF TIME. APPEARANCE: CREAMY COLOURED POWDER, ODOR: BEAN LIKE,

MOISTURE: 8.0% (MAXIMUM), PH: 8.0, ASH :1% (MAXIMUM), PARTICLE SIZE

THROUGH 200 MESH (75 MICRON): 95% (MINIMUM), BROOKFIELD VISCOSITY :

8000 CP (MINIMUM), (1% SOLUTION IN DISTILLED WATER AT 25 DEG. C, AFTER 24

HOURS (SPINDLE #4, 20 RPM), FANN VISCOSITY INITIAL 10 MINUTE: 42 CP

(MINIMUM), (2.00 GM / 350 MLS, IN SEA WATER, @ 511 SEC-1, F1 SPRING. SEA

WATER: 41.95 GM NACL IN 1000 MLS DISTILLED WATER.

1000824113

26Chemicals

(Drilling Fluids)POLYETHER POLYOL DEFOAMER

ADDITIVE DRILLING FLUID; LIQUID FORM,POLYETHER POLYOL,FOR DEFOAMER

USED IN BOTH FRESHWATER AND SALTWATER DRILLING FLUIDS SYSTEMS,5

GALLON PAIL,DEFOAMER USED IN BOTH FRESHWATER AND SALTWATER

DRILLING FLUIDS SYSTEMS,EFFECTIVE FOR REDUCING FOAM CAUSED BY WATER

SOLUBLE GLYCOL PRODUCTS, CONTAINS NO OIL FOR CAUSING SHEEN OR SLICK

ON WATER SURFACE, NORMAL TREATMENT ,0.05 GAL BBL,CLEAR LIQUID, MILD

ODOR DENSITY 1003 KG/M3 8.36 LB/GAL, POUR POINT 26 DEG C, FLASH POINT

ADDITIVE, DRILLING FLUID, LIQUID, POLYETHER POLYOL DEFOAMER USED IN

BOTH FRESHWATER AND SALTWATER DRILLING FLUIDS SYSTEMS, 5 GALLON PAIL,

DEFOAMER USED IN BOTH FRESHWATER AND SALTWATER DRILLING FLUIDS

SYSTEMS, EFFECTIVE FOR REDUCING FOAM CAUSED BY WATE.

1000815463

27Chemicals

(Drilling Fluids)CRUDE OIL EMULSION BRAKER

ADDITIVE DRILLING FLUID; LIQUID AQUEOUS SOLUTION FORM,MIXTURE OF

ORGANIC NOMINAL PIPE SIZE: 5-1/8 IN,FOR EMULSION BREAKER, BREAKS DOWN

CRUDE FOR THE SEPARATION OF BOTH OIL AND SOLIDS,ORGANIC,

BIODEGRADABLE, CITRUS ODOR,55-GALLON DRUM,MEDIUM BLUE AQUEOUS

SOLUTION, SG:1.2-1.4, PH:7-9, VISCOSITY:100 CST,FREEZE POINT: 26 DEG F,

SOLUBLE IN FRESH AND BRINE WATER, APPLIED BY BATCH OR DOWN HOLE

INJECTION METHODS.

1000813531





9COM/9CAT

28Chemicals

(Drilling Fluids)CRUDE OIL VISCOSITY REDUCER

ADDITIVE DRILLING FLUID; LIQUID, AQUEOUS SOLUTION FORM,MIXTURE OF

ORGANIC COMPOUNDS AND ENZYMES,FOR VISCOSITY REDUCING AGENT,

RETURNS HEAVY HYDROCARBONS TO AN OIL PHASE,ORGANIC, BIODEGRADABLE,

CITRUS ODOR,55-GALLON DRUM,MEDIUM BLUE AQUEOUS SOLUTION, SG:1.2-

1.4, PH:7-9, VISCOSITY:200 CST,FREEZE POINT: 27 DEG F, SOLUBLE IN FRESH &

BRINE WATER AND OIL SOLUBLE, APPLIED BY BATCH OR DOWN HOLE INJECTION

METHODS, ++DESIGNED FOR THE TREATMENT OF DIFFICULT PARAFFIN AND

ASPHALTENE PROBLEMS BREAK DOWN THE LONG CHAIN AND CYCLIC PARAFFIN'S

(ALONG WITH OTHER LONG CHAIN HYDROCARBONS SUCH AS ASPHALTENES)

ALLOWING THEM TO RETURN TO THE OIL PHASE PERMANENTLY.

1000813532

29Chemicals

(Drilling Fluids)EC-101 cutting wash

ADDITIVE DRILLING FLUID; AQUEOUS SOLUTION FORM,MIXTURE OF ORGANIC

COMPOUNDS AND ENZYMES,FOR A NON-TOXIC ,NON- HAZARDOUS,NON-

FLAMMABLE NON-CORROSIVE,100% BIODEGRADABLE,WATER BASED PRODUCT

WHICH IS UTILIZED IN BUT NOT LIMITED TO THE FOLLOWING APPLICATION,DRILL

CUTTING DECONTAMINATION, TREATMENT AND DISPOSAL, HYDROCARBON

CONTAMINATED SOLIDS TREATMENT AND DE- OILING OPERATION ON ONSHORE

AND OFFSHORE OIL DRILLING RIGS,PRODUCTION PLLATFORMS AND VESSELS , OIL

SPILL CLEANUP OPERATION AND PROCESS PLANT CLEAN UP . THE PRODUCT

LEAVES NO PETROCHEMICAL DISTILLATES AFTER PROPER

TREATMENT,APPEARANCE: MEDIUM BLUE AQUEOUS SOLUTION, SPECIFIC

GRAVITY: 1.2 - 1.4 (WATER=1), PH: 7 - 9 POUR POINT : 26 DEG F FREEZE POINT: 26

░F SOLUBILITY : FRESH AND BRINE WATER,55-GAL DRUM.

1000820609

30Chemicals

(Drilling Fluids)ALL TEMP

ADDITIVE; DRILLING MUD TYPE,FOR USED AS HT THINNER IN WIDE RANGE OF

WATER-BASE.,SOLID - WHITE POWDER FORM,25.0 LB/BAG,USED AS HT THINNER

IN WIDE RANGE OF WATER-BASE. DOES NOT CONTAIN HEAVY METALS/CHROME

OR REQUIRE SODIUM HYDROXIDE FOR ACTIVATION AND STABLE UP TO

TEMPERATURE 400 F DEG(204 DEG). TREATMENT RANGE FROM 0.5 LB/BBL TO

3.0 LB/BBL, ODOURLESS, PH : 7-9 (1%AQ. SOLN.), SOLUBLE IN WATER, SHEAR

STRENGTH, LB/100 FT▓, 32 MAX PLASTIC VISCOSITY, CP, 32 MAX, YIELD POINT,

LB/100 FT▓, 32 MAX, 10 SECOND GEL, LB/100 FT▓, 12 MAX, 10 MINUTE GEL,

LB/100 FT▓, 38 MAX, 30 MINUTE FILTRATE, ML, 48 MAX.

1000823315





9COM/9CAT

31Chemicals

(Drilling Fluids)CHEMTROL X

ADDITIVE; ADDITIVE: DRILLING MUD TYPE,FOR PROVIDES HPHT FILTRATION

CONTROL AND RHEOLOGICAL STABILITY IN WIDE RANGE OF WATER-BASE

MUD.,SOLID - TAN TO BLACK POWDER FORM,50.0 LB/BAG,BLEND OF

DERIVATIZED ACRYLIC COPOLYMER DEFLOCCULANT AND CAUSTICIZED LIGNITE

PROVIDES HPHT FILTRATION CONTROL AND RHEOLOGICAL STABILITY IN WIDE

RANGE OF WATER-BASE MUD. INITIAL TREATMENTS OF 2.0 TO 6.0 LB/BBL.

NORMAL TREATMENT LEVELS ARE BASED ON TYPES OF WBM & NEEDED.

APPEARANCE : SOLID, TAN TO BLACK POWDER, ODOR: EARTHY, SPECIFIC

GRAVITY: 1.5 , PARTIALLY SOLUBLE IN WATER. SPECIFIC GRAVITY: 1.5 PH: 9-10

SOLUBILITY : PARTIALLY SOLUBLE IN WATER.

1000823317

32Chemicals

(Drilling Fluids)KEM-SEAL PLUS

ADDITIVE; ADDITIVE: DRILLING MUD TYPE,FOR HTHP FILTRATION CONTROL

ADDITIVE WORK WITH ALL TYPES OF WATER BASED FLUIDS,SOLID - WHITE

POWDER FORM,25.0 LB/BAG,HTHP FILTRATION CONTROL ADDITIVE WORK WITH

ALL TYPES OF WATER BASED FLUIDS, TEMPERATURES UP TO 500 DEG. F.

TREATMENT RANGE VARIES BASED ON FILTRATE VALUE DESIRED AND WELL

TEMPERATURE, A REASONABLE RANGE WILL BE 1 TO 6 LB/BBL.IS, SHOULD BE

ADDED SLOWLY TO AVOID HIGH RAISE IN VISCOSITY. APPEARANCE : SOLID,

WHITE POWDER, ODOR:SLIGHT, SPECIFIC GRAVITY :1300 KG/M3 @ 16 DEG. C,

SOLUBILITY : SOLUBLE IN WATER, SALT/HARD WATER PERFORMANCE, FILTRATE,

ML: 17 MAX AGING PERFORMANCE, FILTRATE, ML: 19 MAX.

1000823318

33Chemicals

(Drilling Fluids)Temperature Stabilizer

ADDITIVE; DRILLING MUD TYPE,FOR FREE RADICAL SCAVENGER AND

TEMPERATURE STABILIZER,COLORLESS LIQUID FORM,200

LITERS/DRUM,FUNCTIONS BY SCAVENGING FREE RADICALS AND SLOWS DOWN

THERMAL DEGRADATION OF POLYMERIC COMPONENTS, SUCH AS XANTHAN

GUM, PAC AND STARCH, IN THE DRILLING FLUID WHICH ALLOWING THE

TEMPERATURE STABILITY TO BE EXTENDED BY UP TO 50 DEG F. NORMAL

TREATMENT: 2.0 TO 4.0 LB/BBL FLASH POINT : > 195 DEG. F, SPECIFIC GRAVITY :

1.05-1.15, SOLUBILITY : SOLUBLE IN WATER, ACTIVES % W/W 68 - 72, SG @ 20° C

1.05 - 1.15.

1000823316





9COM/9CAT

34Chemicals

(Drilling Fluids)COASTAL SPOT

ADDITIVE DRILLING FLUID; LIQUID FORM,BLEND OF POLYALPHAOLEFIN ( PAO)

SYNTHETIC HYDROCARBON, EMULSIFIERS, ACTIVATORS AND INITIATORS,FOR

SPOTTING FLUID FOR FREEING STUCK PIPE,PAO BASED PRODUCT WITH

PATENTED ADDITIVES,275 GALLON IBC CONTAINER,ADDITIVE, DRILLING FLUID:

LIQUID, BLEND OF POLYALPHAOLEFIN (PAO) SYNTHETIC HYDROCARBON,

EMULSIFIERS, ACTIVATORS AND INITIATORS, SPOTTING FLUID FOR FREEING

STUCK PIPE, PAO BASED PRODUCT WITH PATENTED ADDITIVES, 275 GALLON IBC

CONTAINER,CLEAR YELLOW LIQUID: SG:0.95-1. 05: DISPERSIBLE IN WATER: POUR

POINT: -20 DEG F, FLASH POINT GREATER 300 DEG F: REPLACEMENT FOR DIESEL

AND MINERAL OIL BASED SPOTTING FLUIDS: DEHYDRATES AND CRACKS FILTER

CAKE TO ALLOW PENETRATION AROUND THE PIPE WITH PAO TO FREE STUCK

PIPE.

1000813125

35Chemicals

(Drilling Fluids)SX PLUS, 160 MICRONS

ADDITIVE DRILLING FLUID; BLACK SOLID POWDER PARTICULATES OF SPECIFIC

SIZED GRINDS FORM,HEAT TREATED CARBON BASED MATERIAL,FOR USED FOR

SEEPAGE CONTROL, BRIDGING, PLUGGING, OIL & WATER MUDS, LUBRICITY,

SEALING OF DEPLETED ZONES, PREVENTION OF STUCK PIPES,GRAPHITE

PARTICLES 40 MESH TO GRATER THAN 200 MESH ( 425 TO > 75

MICRONS),ADDITIVE, DRILLING FLUID: BLACK SOLID POWDER PARTICULATES OF

SPECIFIC SIZED GRINDS, HEAT TREATED CARBON BASED MATERIAL, USED FOR

SEEPAGE CONTROL, BRIDGING, PLUGGING, OIL & WATER MUDS, LUBRICITY,

SEALING OF DEPLETED ZONES PREVENTION OF STUCK PIPES, GRAPH GREY TO

BLACK POWDER SG 1.5 FLASH POINT > 350 DEG (F): MELTING POINT > 500 DEG

(F): PARTICLE SIZE:D90-245, D50-160, D10-111 NEGLIGIBLE SOLUBILITY IN WATER

AND OIL: USED FOR SEALING POROUS SANDS AND OTHER FORMATION TO

REDUCE DIFFERENTIAL PRESSURE TRANSFER.

1000813126

36Chemicals

(Drilling Fluids)Cross-LINK LCM Retarder

ADMIXTURE DRILLING MUD; CLEAR LIQUID FORM,ADDITIVE RETARDER,FOR

CROSS-LINKING X-LINK POLYMER FOR MIXING VISCOUS PILLS FOR CURING FLUID

CIRCULATION LOSS DURING DRILLING OPERATION,CROSS LINKING MATERIAL FOR

X-LINK POLYMER,5 GALLONS PER CAN,SPECIFIC GRAVITY 1.323 @20 DEG C,

BOILING POINT 221 DEG F (105 DEG C), MOLECULAR WEIGHT 112.0, SOLUBLE IN

WATER SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT

PACKING MANUAL.

1000757568





9COM/9CAT

37Chemicals

(Drilling Fluids)Cross-LINK LCM

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,LOST CIRCULATION

MATERIAL,ECTED BY TEMPERATURE AND EXTENDERS. ND OF HIGH MOLECULAR

RETARDERS LULOSE FIBERS AND PARTICLE SS-LINKING AGENTS, G. THE CROSS-

LINKING IS PERATURE TOLERANT GEL-LIKE FORM STIFF, DURABLE AND PAPER

BAG,INSOLUBLE IN WATER. SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI

ARAMCO EXPORT PACKING MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT

NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE

IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN SHALL BE PRINTED ON

THE CONTAINER. THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG


(INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER 3RD PLY 80 LB MIN.

NATURAL KRAFT PAPER (EXTERIOR PLY).

1000757567

38Chemicals

(Drilling Fluids)

BIG BAG BARITE TRANS 0.99 M3

ORANGE

BIG BAG SYSTEM COMPONENTS: CONTAINER: BIG BAG; 35 CU FT CAPACITY;

ORANGE COLOR; (FOR BARYTES). CONTAINER; BARYTE TRANSPORT TYPE,0.99 M3

(35 CU FT),BODY AND CONE SECTION: M049 LID SECTION: M426 INLET AND

OUTLET SPOUT: M326 HEAVY DUTY WIRE RING: INSERTED IN THE TOP WELDED

LID MADE FROM WIO2 MATERIAL,ORANGE,BIG BAG SYSTEM COMPONENT, IBC

TRANSPORT CONTAINERS LTD THERE ARE TWO (2) CERTIFICATE NUMBERS FOR

THE BAGS, AND THE FOLLOWING MANDATORY TEST REQUIREMENTS MUST BE

MET: A) STANDARD: BS-EN 1898-2001, CLASS: HEAVY DUTY THERMOPLASTIC,

CERTIFICATE NUMBER: 101043, APPROVED RATING: SWL: 2500KG/8:1 SF. B)

STANDARD: EFIBCA 003: 1985, CLASS: HEAVY DUTY THERMOPLASTIC,

CERTIFICATE NUMBER: 101161E APPROVED RATING: SWL: 2500KG/8:1 SF

1000029881

39Chemicals

(Drilling Fluids)

BIG BAG BENTONITE TRANS 0.99

M3 BLUE

BIG BAG SYSTEM COMPONENTS: CONTAINER: BIG BAG; 35 CU FT CAPACITY; BLUE

COLOR; (FOR BENTONITE). CONTAINER; BENTONITE TRANSPORT TYPE,0.99 M3

(35 CU FT),BODY AND CONE SECTION: M047 LID SECTION: M425 INLET AND

OUTLET SPOUT: M325 HEAVY DUTY WIRE RING: INSERTED IN THE TOP WELDED

LID MADE FROM WIO2 MATERIAL,BLUE,BIG BAG SYSTEM COMPONENT, IBC

TRANSPORT CONTAINERS LTD THERE ARE TWO (2) CERTIFICATE NUMBERS FOR

THE BAGS, AND THE FOLLOWING MANDATORY TEST REQUIREMENTS MUST BE

MET: A) STANDARD: BS-EN 1898-2001, CLASS: HEAVY DUTY THERMOPLASTIC,

CERTIFICATE NUMBER: 101043, APPROVED RATING: SWL: 2500KG/8:1 SF. B)

STANDARD: EFIBCA 003: 1985, CLASS: HEAVY DUTY THERMOPLASTIC,

CERTIFICATE NUMBER: 101161E APPROVED RATING: SWL: 2500KG/8:1 SF

1000029882





9COM/9CAT

40Chemicals

(Drilling Fluids)BIG BAG, ZIP NYLON

BIG BAG SYSTEM COMPONENTS: ZIP TIES: NYLON; BIG BAG; TYPE 120-R. . TIE; ZIP

TYPE,NYLON,BIG BAG SYSTEM COMPONENT, IBC TRANSPORT CONTAINERS LTD

TYPE "120-R".

1000029930

41Chemicals

(Drilling Fluids)BIG BAG, LIFTING

BIG BAG SYSTEM COMPONENTS: LIFTING RING: BIG BAG; TYPE 109.5. . RING; BIG

BAG LIFTING TYPE,BIG BAG SYSTEM COMPONENTS, IBC TRANSPORT CONTAINERS

LTD, TYPE 109.5.

1000029887

42Chemicals

(Drilling Fluids)PENETREX - ROP enhancer

ADMIXTURE DRILLING MUD; LIQUID FORM,ISOMERISED OLEFINS 60-90%,FOR

DESIGNED TO INCREASE RATE OF PENETRATION (ROP)IN WATER BASED DRILLING

FLUID SYSTEMS, USED IN MEDIUM TO HARD SHALES,ISOMERISED OLEFINS 60-

90%,55 GAL/DRUM,RECOMMENDED INITIAL TREATMENT OF 1% TO 2% BY

VOLUME SHOULD BE MADE BY INJECTION TO THE CIRCULATING SYSTEM.

ADDITIONAL CAN BE ADDED UP TO 5-6% BY VOLUME DEPENDING ON THE ROP

ACHIEVED, AMOUNT OF SHALE ENCOUNTERED, TYPE OF MUD SYSTEM AND THE

INTERVAL LENGTH COLORLESS TO LIGHT YELLOW, MILD ODOR,SG 0.84, FREEZING

POINT-10 DEG C, BOILING POINT >270OC, FLASH POINT > 136 DEG C,INSOLUBLE

IN WATER SOLUBLE IN HYDROCARBONS SHIPMENT OF PRODUCTS MUST

CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.

1000775552

43Chemicals

(Drilling Fluids)MAX-PLEX

ADMIXTURE DRILLING MUD; BROWN POWDER DUST FORM,RESIN AND

ALUMINATE COMPOUND,FOR FOR REDUCING PORE PRESSURE TRANSMISSION

AND HPHT FILTRATION RATES,ALUMIUM COMPLEX-40-60%&OXYALKYLATED

ALKANOL -1-5% BY WT,50 LB BAG,USED IN FRESH UP TO SATURATED SALT WATER

BASE MUD SYSTEMS FOR STABILIZING SHALE AND PREVENTION OF BIT AND

BOTTOM HOLE ASSEMBLY BALLING BROWN COLOR, ODORLESS, SG 1.85,PH 11-12

(1% SOLUTION) TEMP. STABILITY300 DEG F, SOLUBLE IN WATER, INSOLUBLE IN

ORGANIC SOLVENTS SHIPMENT OF PRODUCTS MUST CONFORM TO SAUDI

ARAMCO EXPORT PACKING MANUAL.

1000775553

44Chemicals

(Drilling Fluids)MAX-GUARD

ADMIXTURE DRILLING MUD; LIQUID FORM,POLYAMINE,FOR PRIMARY CLASS

HYDRATION AND SWELLING SUPPRESSANT,AQUEOUS SOLUTUTION OF AMINE

ACID COMPLEX,55 GAL DRUM,THAT PROVIDES INHIBITION OF REACTIVE CLAY

AND GUMBO BY SUPPRESSING HYDRATION AND SWELLING WITHIN THE CLAY

MINERAL PLATELETS AMBER COLOR, MILD ODOR,SG 1.07-1.09, PH 6.8-7.2 (2%

SOLUTION),SOLUBLE IN WATER,FLASH POINT >93OC SHIPMENT OF PRODUCTS

MUST CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.

1000775554





9COM/9CAT

45Chemicals

(Drilling Fluids)CLAY-SEAL

ADMIXTURE CEMENT; FOR CLAYSEAL SHOULD BE ADDED DIRECTLY TO THE

SYSTEM.THIS SHOULD OCCUR AFTER PREHYDRATING.,TYPE ADMIXTURE, CEMENT

HYDRO GUARD, CLAYSEAL,ETHOXYLATED POLYAMINE,5 GAL GALLON

PAIL,APPEARANCE: TRANSPARENT YELLOW LIQUID, ODOR: AMINE, SPECIFIC

GRAVITY: 1GM/CC, SOLUBILITY: SOLUBLE IN WATER. CLAYSEAL SHOULD BE

ADDED DIRECTLY TO THE SYSTEM.THIS SHOULD OCCUR AFTER PREHYDRATING

ALL BENTONITE ADDITIONS AND ADDING FLUID LOSS ADDITIVES.INITIAL

TREATMENTS IN NONDISPERSED SYSTEMS MAY CAUSE SLIGHT FLOCCULATION

AND MAY REQUIRE A THINNER. CLAYSEAL ADDITIONS WILL BE 4-8 LB/BBL AND

FOR BEST RESULTS A MINIMUM OF 4 LB/BBL OF CLAYSEAL┐ IS REQUIRED.

1000812301

46Chemicals

(Drilling Fluids)GLYCOL - GEM GP

ADMIXTURE DRILLING MUD; DARK BROWN LIQUID FORM,POLYALKYLENE GLYCOL

OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR

ADVERSELY AFFECT FLUID PROPERTIES.,FOR USED TO IMPROVE LUBRICITY, SHALE

STABILITY AND REDUCE BIT BALLING. NORMAL TREATMENT,POLYALKYLENENE

GLYCOL,55 GALLON DRUM,CONCENTRATION IS 2-6% BY VOLUME IN A MUD

SYSTEM BUT OPTIMUM CONCENTRATION SHOULD BE IDENTIFIED ON A CASE BY

CASE BASIS. APPEARANCE YELLOW TO BROWN LIQUID, ODOR MILD, SPECIFIC

GRAVITY 1.01, BOILING POINT (░C) 126 C, SOLUBILITY IN WATER MISCIBLE.


MANUAL.

1000812016

47Chemicals

(Drilling Fluids)BORE-HIB

ADDITIVE DRILLING FLUID; DARK YELLOW LIQUID FORM,GLYCERINE AND SILICATE

SALT OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL

AND/OR ADVERSELY AFFECT FLUID PROPERTIES.,FOR USED AS STABILIZER WHILE

DRILLING HIGHLY REACTIVE SHALE AND CLAYS. BORE-HIB CAN BE DEPLETED

WHEN DRILLING ANHYDRITE, GREEN. CEMEN,GLYCERINE AND SILICATE SALT

MIXTURE,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: DARK YELLOW LIQUID,

GLYCERINE AND SILICATE SALT OTHER ASSOCIATED ELEMENTS MUST NOT BE

HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES USED

AS STABILIZER WHILE DRILLING HIGHLY REACTIVE SHALE AND CLAYS. BORE-HIB

CAN. APPEARANCE DARK YELLOW SHIPMENT OF PRODUCT SHALL CONFORM TO

SAUDI ARAMCO EXPORT PACKING MANUAL.

1000812015





9COM/9CAT

48Chemicals

(Drilling Fluids)LC-LUBE, 300-450 MICRON

ADMIXTURE DRILLING MUD; SOLID BLACK OF SPECIFIC SIZED GRINDS

PARTICULATES FORM,PHITE H RESILIENCY SYNTHETIC,FOR WELLBORE

STRENGTHENING. DEPLETED D IN OIL OR WATER BASE MUD ES, PREVENTION OF

STUCKPIPE,50 LB (22.7 KG)/ SACK,1ST PLY OTHER ASSOCIATED ELEMENTS MUST

NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID

PROPERTIES. APPEARANCE: GRAY TO BLACK POWDER. ODOR: ODORLESS. SG: 1.75-

2.5 GM/CC. SOLUBILITY: INSOLUBLE IN WATER & ACID. PARTICLE SIZE: D50: 300-

450 MICRON. RESILIENCY: GREATER THAN 80% AT 10,000 PSI. CONTAINER IS A

MULTI-WALLED SACK - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND

PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT

PAPER (EXTERIOR PLY).

1000758660

49Chemicals

(Drilling Fluids)LC-LUBE Fine, 165 MICRON

ADMIXTURE DRILLING MUD; SOLID BLACK OF SPECIFIC SIZED GRINDS TICULATES

FORM,LC-LUBE FINE, GRAPHITE, SYNTHETIC,FOR USE FOR SEEPAGE CONTROL

BRIDGING, PLUGGING, OIL MUDS, WATER MUDS, LUBRICITY, SEALING OF

DEPLETED ZONES, PREVENTION OF STUCK PIPE,LC-LUBE FINE SYNTHETIC

GRAPHITE,50 LB (22.7 KG)/ SACK,1ST PLY OTHER ASSOCIATED ELEMENTS MUST

NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID

PROPERTIES. APPEARANCE: GRAY TO BLACK POWDER ODOR: ODORLESS SP. GR.:

2.25 GM/CC FREEZING POINT: NA MELTING POINT: >5000 F DEG SOLUBILITY:

INSOLUBLE IN WATER & ACID PARTICLE SIZE: D90 300 D50 165 D10 75

CONTAINER IS A MULTI-WALLED SACK - 75 LB MIN. NATURAL KRAFT PAPER

(INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB

MIN. NATURAL KRAFT PAPER (EXTERIOR PLY).

1000758661

50Chemicals

(Drilling Fluids)MAX-SHIELD

ADMIXTURE DRILLING MUD; MILKY, WHITE LIQUID FORM,MAX-SHIELD LATEX, 60

WT%,FOR SEALING POLYMER IN WATER-BASED DRILLING FLUID SYSTEM,LATEX,

60 WT%,55 GAL/DRUM,USED TO CREATE A SEMI-PERMEABLE MEMBRANE AT

BOREHOLE, IMPROVE HOLE STABILITY AND REDUCE PORE PRESSURE

TRANSMISSION WHICH HELPS PREVENT STUCK PIPE WHEN DRILLING DEPLETED

ZONES. OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL

AND/OR ADVERSELY AFFECT FLUID PROPERTIES. NORMAL TREATMENT: 2-5 % BY

VOLUME. APPEARANCE: MILKY, WHITE LIQUID. ODOR: MILD PH: 6-9 SP. GR.: 1.05

GM/CC FREEZING POINT: 32 F DEG (0 C DEG) BOILING POINT: 212 F DEG (100 C

DEG) FLASH POINT: NA RELATIVE DENSITY: 1025 KG/M3 @ 16 C DEG. SOLUBILITY:

MISCIBLE WITH WATER VOC WEIGHT: <0.6%.

1000758663





9COM/9CAT

51Chemicals

(Drilling Fluids)STEEL SEAL

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,GRAPHITE,FOR LOSS

CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND FRACTURED

FORMATIONS,BLACK ANGULAR MATERIAL CARBON BASED MATERIAL,50 LB

BAG,FOR USE WITH SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS

LUBRICITY FOR WATER BASED FLUIDS TO CONTROL SEEPAGE AND LOST

CIRCULATION 15-25 LB/BBL USED AS A BACKGROUND CONCENTRATION, 50-100

LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONES, 3-10 LB/BBL FOR LUBRICITY

IN WATER BASED FLUIDS. ODORLESS, SG 1.75, FLASH POINT >356OC,INSOLUBLE

IN WATER, PARTICLES SIZE PERCENT < 40 MESH: 100 PERCENT > 200 MESH: 95

CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,


THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE

AS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND

PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN.

1000775555

52Chemicals

(Drilling Fluids)STEEL SEAL Fine

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,GRAPHITE,FOR LOSS

CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND MICRO-FRACTURED

FORMATIONS,GRAY-BLACK ANGULAR MATERIAL CARBON BASED MATERIAL,50 LB

SACK,FOR USE WITH SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS

LUBRICITY FOR WATER BASED FLUIDS TO CONTROL SEEPAGE AND LOST

CIRCULATION 15-25 LB/BBL USED AS A BACKGROUND CONCENTRATION, 60-110

LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONES, 4-10 LB/BBL FOR LUBRICITY

IN WATER BASED FLUIDS. ODORLESS, SG 1.75,FLASH POINT >356OC,INSOLUBLE

IN WATER, PARTICLES SIZE DRY SIEVE ANALYSIS:FINE 99% MIN & REGULAR 95%

MIN. THROUGH (30 MESH) DRY SIEVE ANALYSIS:FINE 40% MIN & REGULAR 2%

MAX THROUGH (200 MESH) MEDIAN PARTICLE SIZE: 80 CONTAINER MUST BE

PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME,

LOCATION, PRODUCTION DATE AND BATCH NUMBER. THE CONSTRUCTION OF

THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY -

75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN.

NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR

PLY) SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT SAMPLING AND TESTING AS

NEEDED.

1000775556





9COM/9CAT

53Chemicals

(Drilling Fluids)STEEL SEAL 50

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SYNTHETIC GRAPHITE,FOR

LOSS CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND MICRO-

FRACTURED FORMATIONS,SYNTHETIC GRAPHITE,50 LB. BAG,FOR USE WITH

SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS LUBRICITY FOR WATER

BASED FLUIDS GREY-BLACK ANGULAR MATERIAL,ODORLESS, SG 1.75, INSOLUBLE

IN WATER, MEDIAN PARTICLE SIZE D-50: 50 15-25 LB/BBL AS A BACKGROUND

CONCENTRATION FOR SEEPAGE AND LOST CIRCULATION CONTROL. 60-110

LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONESOR ON BOTTOM PRIOR TO

TRIPS AND 4-10 LB/BBL FOR LUBRICITY IN WATER-BASED FLUIDS. CONTAINER

MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME,

LOCATION, PRODUCTION DATE AND BATCH NUMBER. THE CONSTRUCTION OF

THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY -

75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN.

NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR

PLY)

1000775557

54Chemicals

(Drilling Fluids)CLAY-GRABBER

ADMIXTURE DRILLING MUD; LIQUID FORM,NON-IONIC LIQUID POLYMER,FOR

FLOCCULANT AND CLAY ENCAPSULATOR. IT STOPS SHALE DISPERSION AND HELPS

STABILIZE SHALES IN THE WELLBORE,HIGH MOLECULAR WEIGHT, NON-IONIC

LIQUID POLYMER,5 GAL PAIL,OPAQUE LIQUID, OFF-WHITE COLOR, PH:6.5-7.5,

CONCENTRATION 30-40 (1% ACTIVE POLYMER), SG 1.02 -1.06, STABILITY UP TO

300 DEG F, IMIISCIBLE IN WATER FOR RESULTS CLAY GRABBER FLOCULANT

SHOULD BE MIXED THROUGH A HIGH SHEAR HOPPER. 0.5-1.0 LB/BBL IN THE

HYDRO-GUARD SYSTEM. 0.25-0.5 LB/BBL FOR CLEAR WATER DRILLING. 0.5-1.0

FOR TROUBLESOME SHALES IN A WATER- BASED SYSTEM.

1000775561

55Chemicals

(Drilling Fluids)CLAY-SYNC

ADMIXTURE DRILLING MUD; GRANULES FORM,NON-IONIC 100% ACTIVE DRY

POLYMER,FOR A CLAY INHIBITOR FOR WATER BASED DRILLING FLUIDS. SHALE

STABILIZER AND WELLBORE LUBRICATOR,LOW MOLECULAR WEIGHT, NON-IONIC

DRY POLYMER,50 LB. BAG,POLYMER ADHERES TO SURFACE OF REACTIVE CLAYS

PREVENTING DISPERSION AND HYDRATION, SHOULD BE MIXED THROUGH THE

HOPPER IN THE HYDRO-GUARD SYSTEM. IF SALINITY >140,000 PPM USE 2 LB/BBL,

IF SALINITY IS<140,000 PPM, USE 3 LB/BBL OFF-WHITE GRANULES, SOLID,

ODORLESS , PH (1% SOLUTION): 6.5-7.5 , SG 1.04, 100 (%ACTIVE POLYMER), BULK

DENSITY 50 LB/FT3 @ 20OC, SOLUBLE IN WATER SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.

1000775562





9COM/9CAT

56Chemicals

(Drilling Fluids)MICROWASH - OHR-759

ADMIXTURE DRILLING MUD; LIQUID FORM,N-BUTANOL,FOR USED AS A CO-

SURFACTANT TO REMEDIATE WELLBORE DAMAGE,SURFACTANT BLEND WITH N-

BUTANOL 100%,55 GALLON DRUM,APPEARANCE CLEAR, COLORLESS

LIQUID,ODOR SWEET, RELATIVE DENSITY:810 KG/M3 BOILING POINT:118 DEG

C,FLASH POINT:37 DEG C, SOLUBLE IN WATER,AUTO-IGNITION TEMPERATURE

343░C. ++THIS ITEM IS ONE OF COMPONENT USED TO FORMULATE THE MICRO-

WASH SYSTEM FOR WELLBORE REMEDIATION AND REMOVE DAMAGE TO THE

RESERVOIR DRILLED WITH INVERT EMULSION FLUIDS. ++ CONTAINER MUST BE


LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S

PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.

MICRO-WASH ACID SYSTEM CONSISTS BAKER ++ HUGHES PRODUCTS, PRIME-743,

PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC

ACID AND FORMIC ACID.

1000811421

57Chemicals

(Drilling Fluids)MICROWASH - OHR-AC

ADMIXTURE DRILLING MUD; LIQUID FORM,ACID CORROSION INHIBITOR,FOR

USED AS AN ACID CONTROL ADDITIVE IN THE MICRO-WASH ACID

SYSTEM,,CONTAINING PROPARGYL ALCOHOL 5-10%,METHANOL 30-60% AND

BLEND OF NON-IONIC SURFACTANTS,55 GALLON DRUM,APPEARANCE:CLEAR

AMBER LIQUID,ODOR:SWEET,SPECIFIC GRAVITY:885-897 KG/M3,FLASH POINT:10-

15.6 DEG C, POUR POINT:LESS THAN -20.2 DEG C,SOLUBLE IN WATER, PH:4-6(5%

IN 25% IPA/75% WATER),FLASH POINT:10-15.6 DEG C (TAG CLOSED CUP),VAPOUR

PRESSURE:85MM HG AT 21 DEG C, ++ THIS ITEM PROVIDES CORROSION

RESISTANCE WHILE REMEDIATING WELLBORE DAMAGE AND DESTROYING OIL-

MUD FILTER CAKE, THE PRODUCT IS BIODEGRADABLE, ACID DISPERSIBILE AND IS

TOLERANT FOR SALTS PRESENT IN ACIDS.CONTAINER MUST BE PROPERLY

LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION,

PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL

CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. ++ MICRO-WASH ACID

SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-

770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC

ACID.

1000811422





9COM/9CAT

58Chemicals


ADMIXTURE DRILLING MUD; LIQUID FORM,BLEND OF NON-IONIC AND ANIONIC

SURFACTANTS.FOR TO DESTROY INVERT EMULSION IN OIL-BASED MUD FILTER

CAKE AND SOILDS,SODIUM TRIDECYL ETHER SULFATE 10-20% & OTHER

COMPONENTS,275 GALLON IBC CONTAINER,ADMIXTURE, DRILLING MUD: LIQUID,

BLEND OF NON-IONIC AND ANIONIC SURFACTANTS., TO DESTROY INVERT

EMULSION IN OIL-BASED MUD FILTER CAKE AND SOILDS, SODIUM TRIDECYL

ETHER SULFATE 10- 20% & OTHER COMPONENTS, 275 GALLON IBC CONTAINER,

APPEARANCE:TRANSPARENT, YELLOW LIQUID, ODOR:DISINFECTANT,SPECIFIC

GRAVITY: 1086.5 KG/M3,. FLASH POINT >100░C SOLUBLE IN WATER, PH: 7.8 AT

25 DEG C, VISCOSITY: 28. 0CST AT 40░C.THIS MATERIAL IS USED AS ONE OF

SURFACTANT COMPONENT IN THE MICRO-WASH ACID SYSTEM IT IS BLENDED OF

NON-IONIC AND ANIONIC SURFACTANTS WITH NEAR ZERO INTERFACIAL.

CONTAINER MUST BE PROPERLY LABELED WITH:VENDOR'S NAME


SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING

AS NEEDED. MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS:

PRIME-743, PRIME-760, PRIME-770 ,OHR- 759, OHR-AC, OHR-757, OHR- 750 &

GLACIAL ACETIC ACID AND FORMIC ACID.

1000811423





9COM/9CAT

59Chemicals



SURFACTANTS,FOR TO REMEDIATE WELLBORE DAMAGE, DESTROY INVERT

EMULSION IN OIL-BASED MUD FILTER CAKE AND WATER-WET METAL

SURFACES,ALKYPHENYL OXIDE SULPHONATES,275 GALLON IBC

CONTAINER,ADMIXTURE, DRILLING MUD: LIQUID, BLEND OF NON-IONIC AND

ANIONIC URFACTANTS, TO REMEDIATE WELLBORE DAMAGE, DESTROY INVERT

EMULSION IN OIL-BASED MUD FILTER CAKE AND WATER-WET METAL SURFACES,

ALKYPHENYL OXIDE SULPHONATES , 275 GALLON IBC CONTAINER ,

APPEARANCE:CLEAR ,YLLOW- ORANGE LIQUID, ODOR:DISINFECTANT SPECIFIC

GRAVITY:1108 KG/M3,. BOILING POINT:212?F , FLASH POINT >100░C, SOLUBLE IN

WATER : PH:5.5 AT 25?C, VISCOSITY:69CST AT 40░C PROPRIETARY BLEND THAT IS

CUSTOM DESIGNED TO DISPERSE FILTER CAKE AS A COMPONENT IN MICRO-

WASH ACID SYSTEM TO REMOVE OBM SKIN DAMAGE AND ALLOW THE

RESERVOIR TO FLOW AT MAXIMUM POTENTIAL. IT IS BLEND OF NON-IONIC AND

ANIONIC SURFACTANTS WITH NEAR ZERO INTERFACIAL TENSION. NORMAL

TREATMENT: 10 - 25% BY VOLUME ++ CONTAINER MUST BE PROPERLY LABELED

WITH: VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION

DATE AND BATCH NUMBER.

1000811424

60Chemicals

(Drilling Fluids)MICROWASH - PRIME-743

ADMIXTURE DRILLING MUD; LIQUID FORM,GLYCEROL-BELEND OF NON-IONIC

SURFACTANTS,FOR USED FOR REMOVE OIL-WET SOLIDS FROM THE WELLBORE

AND WATER-WET METAL SURFACES.,GLYCEROL, BLEND OF NON-IONIC AND

ANIONIC SURFACTANTS,5 GALLON CAN,++ APPEARANCE OPAQUE YELLOW-

ORANGE LIQUID, PH 7.6, SPECIFIC GRAVITY 1015 KG/M3, BOILING POINT 100

DEG, FLASH POINT GREATER THAN 93 DEG C, WATER SOLUBLE ++ FULLY

COMPATIBLE AT ALLRATIOS WITH OIL MUD SPACERS AND OIL-NORMAL ONE OF

THE SURFACTANT COMPONENTS IN THE MICRO-WASH ACID SYSTEM ++

CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,

MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER


AS NEEDED. CONTAINER MUST BE PROPERLY LABELED ++MICRO-WASH ACID

SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-

770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC

ACID.

1000811425





9COM/9CAT

61Chemicals


ADMIXTURE DRILLING MUD; LIQUID FORM,2-BUTOXYETHANOL > 60% AND

SURFACTANTS,FOR USED TO CREATE AN EFFECTIVE PUSH PILL TO PILOT THE

DISPLACEMENT AND ACT AS NON EMULSIFIER,2-BUTOXYETHANOL > 60% AND A

BLEND OF UNSATURATED AROMATIC HYDROCARBONS, NON-IONIC SURFACTANT

AND ANIONIC SURFACTANTS,5 GALLON CAN,APPEARANCE CLEAR,`LIGHT YELLOW

LIQUID, ODOR MILD, SWEET SPECIFIC GRAVITY:920 KG/M3 FLASH POINT

64░C(PMCC),PH 4.7-5.7(75%IPA/25% WATER), SOLUBLE IN WATER, VISCOSITY: 95-

105 CPS AT 20 DEG C ++ USED FOR REMOVING OIL-WET DEBRIS FROM THE

METAL SURFACES, FULLY COMPATIBLE AT ALL RATIOS WITH OIL MUD SPACERS

AND ALL OIL- BASED DRILLING FLUIDS.ONE OF THE SURFACTANT COMPONENTS

IN THE MICRO-WASH ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED

WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE

AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER

SAMPLING AND TESTING AS NEEDED CONTAINER MUST BE PROPERLY LABELED ++

MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743,

PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC

ACID AND FORMIC ACID.

1000811426

62Chemicals



SURFACTANTS,FOR TO CREATE AN EFFECTIVE FOLLOW-UP DISPLACEMENT

NEWTONIAN CLEANING PILL USED TO REMOVE OIL-WET SOLIDS,BLEND OF NON-

IONIC AND ANIONIC SURFACTANTS,5 GALLON CAN,APPEARANCE: TURBID,`

YELLOW-ORANGE LIQUID ODOR: MILD, SWEET SPECIFIC GRAVITY: 1098 KG/M3,

FLASH POINT: GREATER THAN 100 DEG C(TCC),WATER SOLUBLE ++ FULLY

COMPATIBLE AT ALL RATIOS WITH OIL MUD SPACERS AND ALL OIL- BASED

DRILLING FLUIDS. ONE OF THE SURFACTANT COMPONENTS IN THE MICRO-WASH

ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S

NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH

NUMBER. ++ SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING

AND TESTING AS NEEDED. CONTAINER MUST BE PROPERLY LABELED ++ MICRO-

WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-

760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID

AND FORMIC ACID.

1000811427





9COM/9CAT

63Chemicals

(Drilling Fluids)ACETIC ACID > 96%

ADDITIVE DRILLING FLUID; CLEAR,COLORLESS LIQUID FORM,ACETIC ACID >

96%,FOR TO ACIDIZE SOLUBLE CALCIUM CARBONATE PARTICLES IN WELLBORE

REMEDIATION,ACETIC ACID > 96%,275 GALLON IBC TOTE,CLEAR LIQUID, STRONG

PUNGENT VINEGAR ODOR DENSITY 1050 KG/M3, BOILING POINT 117 DEG C,

FLASH POINT >102.2░C, SOLUBLE IN WATER,SOLUBLE AUTO-IGNITION

TEMPERATURE 799░C. ACETIC ACID IS A COMPONENT OF THE BAKER HUGES

MICRO- WASH SYTEM TO IMPROVE WELL PRODUCTIVITY. IT IS A CARBOXYLIC

ACIDS WITH THE MOLECULAR FORMULA OF CH3COOH, NORMAL TREATMENT 1 -

15 % BY VOLUME. 275 GALLON IBC.

1000814796

64Chemicals

(Drilling Fluids)FORMIC ACID >90%

ADDITIVE DRILLING FLUID; CLEAR,COLORLESS LIQUID FORM,FORMIC ACID

>90%,FOR TO ACIDIZE SOLUBLE CALCIUM CARBONATE IN MICRO-WASH,FORMIC

ACID >90%,55 GALLON DRUM,ADDITIVE DRILLING FLUID CLEAR,COLORLESS

LIQUID FORM,FORMIC ACID >90%,FOR TO ACIDIZE SOLUBLE CALCIUM

CARBONATE IN MICRO-WASH, FORMIC ACID >90%,55 GALLON DRUM,ADDITIVE,

DRILLING FLUID: CLEAR,COLORLESS LIQUID, FORMIC ACID >90%, TO ACIDIZE

SOLUBLE CALCIUM CARBONATE IN MICRO-WASH, FORMIC ACID >90%, 55

GALLON DRUM , ADDITIVE, DRILLING FLUID: CLEAR,COLORLESS LIQUID,FORMIC

ACID >90%, TO ACIDIZE SOLUBLE CALCIUM CARBONATE IN MICRO-WASH,

FORMIC ACID >90%, 55 GALLON DRUM.

1000811877

65Chemicals

(Drilling Fluids)N-FLOW - LOSURF-259

ADDITIVE DRILLING FLUID; LIQUID FORM,ISOPROPANOL AND HEAVY AROMATIC

PETROLEUM NAPTHA,FOR BREAKS EMULSION IN OIL BASE MUD FILTER CAKE,

USED IN PUSH PILL SPACER PRIOR TO SPOT N-FLOW 325 TREATMENT FILTER CAKE

REMOVAL,5 GALLON CAN,ADDITIVE, DRILLING FLUID: LIQUID, ISOPROPANOL AND

HEAVY AROMATIC PETROLEUM NAPTHA, BREAKS EMULSION IN OIL BASE MUD

FILTER CAKE, USED IN PUSH PILL SPACER PRIOR TO SPOT N-FLOW 325

TREATMENT FOR FILTER CAKE REMOVAL, ISOPROPANOL AND HEAVY AROMATIC

PETROLEUM NAPTHA, 5 GALLON CAN, APPEARANCE: CLEAR LIGHT AMBER,

ALCOHOL ODOR, SPECIFIC GRAVITY: 0.92 @ 20 DEG C BOILING POINT: 92 DEG C,

DISPERSES IN WATER. ++ PREVENTS OIL WET FINES FROM STABILIZING

EMULSIONS, NORMAL USE CONCENTRATION: 0.1 - 2.0 % V/V. NONIONIC

NONEMULSIFIER BLEND, PRIMARILY DESIGNED FOR ACIDIZING LIMESTONE,

DOLOMITE AND SANDSTONE FORMATION & FRACTURE TREATMENT.

1000811529





9COM/9CAT

66Chemicals

(Drilling Fluids)Mutual Solvent - MUSOL

ADDITIVE DRILLING FLUID; LIQUID FORM,ETHYLENE GLYCOL MONOBUTYL ETHER

SOLVENT,FOR REDUCE OIL WET TENDENCIES AND IMPROVE THE OVERALL

WETTING CONDITION OF THE FORM,ETHYLENE GLYCOL MONOBUTYL ETHER,55

GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, ETHYLENE GLYCOL

MONOBUTYL ETHER SOLVENT, USED WITH NONANIONIC SURFACTANT (LOSURF-

259) TO REDUCE OIL WET TENDENCIES AND IMPROVE THE OVERALL WETTING

CONDITION OF THE FORM, ETHYLENE GLYCOL MONOBUTYL ETHER, 55 GALLON

DRUM , APPEARANCE: COLORLESS LIQUID, MILD ODOR, SPECIFIC GRAVITY: 0.9 @

20 DEG C BOILING POINT: 171 DEG C SOLUBLE IN WATER. ++ PREVENTS OIL WET

FINES FROM STABILIZING' EMULSIONS, NORMAL USE CONCENTRATION: 10 %

V/V. PRIMARILY USED DURING ACIDIZING OPERATIONS IN SILICATE FORMATION.

++ CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME,

MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER


AS NEEDED ++ N-FLOW 325 SYSTEM CONSISTS OF HALLIBURTON BAROID

PRODUCTS LOSURF-259, MUSOL, N-FLOW 325 & BDF-443.

1000811540

67Chemicals

(Drilling Fluids)N-FLOW 325

ADDITIVE DRILLING FLUID; LIQUID FORM,DIETHYLENE GLYCOL DIFORMATE,FOR

RELEASED FORMIC DISSOLVES CALCIUM CARBONATE TO REMOVE FILTER CAKE

AND REPAIR FILTER CAKE AND REPAIR MUD DAMAGE,DIETHYLENE GLYCOL

DIFORMATE,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, DIETHYLENE

GLYCOL DIFORMATE , RELEASED FORMIC DISSOLVES CALCIUM CARBONATE TO

REMOVE FILTER CAKE AND REPAIR MUD DAMAGE, DIETHYLENE GLYCOL

DIFORMATE, 55 GALLON DRUM , APPEARANCE: LIGHT YELLOW LIQUID,ODOR:

CHARACTERISTIC, SPECIFIC GRAVITY 1.2 GM/CC, BOILING POINT:240 DEG C,

PH:2.8 SOLUBLE IN WATER ++ COMPATIBLE WITH OIL, FORMATION BRINE AND

DRILL- IN FLUID BASE OIL (DIESEL), THE CHEMICAL IS DISSOLVED IN THE CARRIER

BRINE, BECAUSE THE ACID LIBERATION ACTION IS SLOW. ACID WILL BE

GENERATED OVER THE SUBSEQUENT PERIOD OF TIME, NORMAL CO.

1000811647





9COM/9CAT

68Chemicals

(Drilling Fluids)N-FLOW - BDF-443

ADDITIVE DRILLING FLUID; LIQUID FORM,SURFACTANT,FOR VALUE EMULSIFIER,

CHANGES THE WETTABILITY OF OIL MUD FILTER CAKE, FOR ACID

CLEANING,BLEND OF PROPRIERATORY CHEMICALS,55 GALLON DRUM,ADDITIVE,

DRILLING FLUID: LIQUID, SURFACTANT, EMULSIFIER, CHANGES THE WETTABILITY

OF OIL MUD FILTER CAKE, FOR ACID CLEANING, BLEND OF PROPRIERATORY

CHEMICALS, 55 GALLON DRUM , APPEARANCE: MILKY TO PALE YELLOW LIQUID,

ODOR: MILD SWEET, SPECIFIC GRAVITY 1.04 GM CC, BOILING POINT: 240 DEG C,

PH 5 - 7.5 (2.5 %), FLASH POINT: GREATER THAN 100 DEG C, SOLUBLE IN WATER

++ IS WATER WET SURFACTANT DISSOLVED IN THE CARRIER BRINE ALONG WITH

N-FLOW. IT CHANGES THE WETTABILITY OF OIL MUD FILTER CA.

1000812034

69Chemicals

(Drilling Fluids)LIQUID THINNER - 450 F

ADMIXTURE: DRILLING MUD; 25 KG DRUM. . . ADMIXTURE DRILLING MUD;

LIQUID FORM,MODIFIED ANIONIC SULPHONATED POLYACRYLATE,FOR

POLYMERIC DEFOCCULANT AND THINNER FOR USE IN LOW LOW SOLID NON

DISPERSED WATER BASE MUD TO IMPACT HIGH TEPERATURE STABILITY,5 GAL

PER CAN,UP TO 234 DEG C (450 DEG F), FOR DEEP WELL APPLICATIONS.

EFFECTIVE IN THE PRESENCE OF DIVALENT IONS AND SALTS.

1000021600

70Chemicals

(Drilling Fluids )

NONTREATED SODIUM

BENTONITE 1000KG Bag

ADMIXTURE, DRILLING MUD GROUND NONTREATED BENTONITE ADMIXTURE

DRILLING MUD; DRY, FREE FLOWING POWDER FORM,BENTONITE SODIUM

MONTMORILLONITE,FOR VISCOSIFIER AND FILTRATE REDUCER FOR WATER-

BASED FLUIDS,NATURAL SMECTITE (SODIUM MONTMORILLONITE) THAT

CONTAINS NO POLYMERS OR ANY OTHER CHEMICALS,RE-USABLE SUPER SACK,API

13A AND API 13 I (LATEST EDITION),THE ORIGINAL MANUFACTURER, PRODUCT

NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION

DATE, STOCK NUMBER SHOULD BE PROVIDED BY THE MANUFACTURER. RE-

USABLE SUPER SACK CONTAINER SHOULD BE SEALED, MULTI-LINED AND MADE

OF WATERPROOF MATERIAL. OTHER ASSOCIATED ELEMENTS IN THE

COMPOSITION MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY

AFFECT FLUID PROPERTIES. PROPER TUBE SAMPLING AND QUARTERING TO BE

CARRIED OUT BY TRAINED AND EXPERIENCED PERSONNEL.

1000021552





9COM/9CAT

71Chemicals

(Drilling Fluids)

HYDROXY ETHYL CELLULOSE

(HEC)

ADMIXTURE: DRILLING MUD; VISCOSIFIER; HYDROXY ETHYL CELLULOSE (HEC),

EXTREMELY HIGH-YIEDLING ADMIXTURE DRILLING MUD; DRY FREE FLOWING

WHITE POWDER FORM,HYDROXY ETHYL CELLULOSE (HEC),FOR MULTI-PURPOSE

VISCOSIFYING POLYMER RAPIDLY SOLUBLE IN FRESHWATER, SEA WATER SALT

SATURATED WATER AND COMPLEX BRINE SYSTEMS. IT IS STABLE AT 250 DEG

F.,HYDROXY ETHYL CELLULOSE (HEC),25 KG OR 50 LB BAG,WATER-SOLUBLE, NON-

IONIC, HIGH MOLECULAR WEIGHT POLYMER, SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER

BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY (INTERIOR PLY) 10# PE

COATING 0.000285 MICRON ALUMINUM SHEET 6# PE COATING 50 LB NATURAL

KRAFT PAPER. THE ALUMINUM SHEET IS COATED ON ONE SIDE WITH 10# PE THE

10# PE IS NEXT TO THE PRODUCT. THE COATED ALUMINUM SHEET IS LAMINATED

TO THE 50 LB KRAFT PAPER. 2ND PLY 50 LB NATURAL KRAFT PAPER. 3RD PLY 50

LB NATURAL KRAFT PAPER. 4TH PLY 50 LB BLEACHED WHITE NATURAL KRAFT

PAPER (EXTERIOR PLY). THE BLEACHED PAPER IS "FULLY BLEACHED WHITE". THE

BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED AND MOISTURE AND

WATER PROOF.

1000021672

72Chemicals

(Drilling Fluids )SODIUM CHLORIDE (NACI 99%)

ADMIXTURE: DRILLING MUD; SODIUMCHLORIDEADMIXTURE DRILLING MUD;

DRY, FREE FLOWING COLORLESS/ WHITEGRANULES OR CRYSTALS, MAIN

COMPONENT FORM,SODIUM CHLORIDE(NACI),FOR A WATER SOLUBLE

WEIGHTING AGENT FOR FORMULATINGSOLIDS FREE COMPLETION BRINES. TO

FORMULATE CLEAR SOLUTIONWITHOUT SUSPENDED MATTERS. ALSO, SALT

SATURATED DRILLING FLUIDSARE USED FOR DRILLING EVAPORITE SALT

SECTIONS.,SODIUMCHLORIDE,1000 KG OR 2200 LB BAG,FREE FLOWING, 0.04 MM-

0.4 MMGRAIN, SIZE NON-BREATHABLE FABRIC BAG W/ DISPOSABLE

LIFTINGSTRAP, STACKABLE W/O PALLET & WITHOUT BOTTOM SPOUT, MIN

TENSILESTRENGTH FACTOR 5 NORMAL HANDLING, SLNN-99SS MOISTURE-PROOF

BIGBAGS W/LIFTING STRAPS, CONTAINER PROPERLY LABELED, W/

VENDOR'SNAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE

ANDBATCH NO, NO PARTICLES GREATER THAN 5MM IN ANY DIMENSION.THE

DISPOSABLESUPER SACKS SHOULD HAVE AT# LEAST 75% OF THEIR SHELF

LIFEREMAINING (THE # PERIOD FROM THE DATE OF MANUFACTURE TO#

THEWARRANTED EXPIRATION DATE) WHEN # SHIPPED OR RECEIVED

ATDESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.# REFER TO

SAPNUMBER: 1000840600 FOR # DISPOSABLE SUPER SACKS SPECIFICATION.

1000021741





9COM/9CAT

73Chemicals

(Drilling Fluids )

POTASSIUM CHLORIDE (KCL 97-

98 WT MIN)

ADMIXTURE: DRILLING MUD; 50 KG (100 LB) SACK; POTASSIUM CHLORIDE

(MURIATE OF POTASH) ADMIXTURE DRILLING MUD; DRY, WHITE FREE FLOWING

GRANULES FORM,POTASSIUM CHLORIDE,FOR PROVIDES POTASSIUM IONS IN

WATER- BASED DRILLING FLUIDS TO INHIBIT SHALE HYDRATION, SWELLING AND

DISPERSION. ALSO USED TO FORMULATE COMPLETION BRINE,POTASSIUM

CHLORIDE,50 KG OR 100 LB BAG,SHIPMENT OF PRODUCT SHALL CONFORM TO

SAUDI ARAMCO EXPORT PACKING MANUAL MULTI-MOISTURE-PROOF

POLYETHYLENE LINED BAGS. NO PARTICLES GREATER THAN 2MM IN ANY

DIMENSION NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG


(INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE

INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER

LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A

MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT

PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR

PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE

AND WATER PROOF.

1000021744

74Chemicals

(Drilling Fluids)XANTHAN GUM (POWDER)

ADMIXTURE COMPONENTS: XANTHAN GUM BIO-POLYMER; 25 KG (50 LB) BAG.

ADMIXTURE DRILLING MUD; DRY FREE FLOWING POWDER FORM,PURE XANTHAN

GUM BIO-POLYMER,FOR PRIMARILY USED FOR VISCOSITY/ SUSPENSION IN FRESH

WATER, SEA WATER, & SATURATED BRINE-BASED DRILLING, WORKOVER &

COMPLETION FLUIDS,PURE XANTHAN GUM BIO-POLYMER,25 KG OR 50 LB

BAG,SHIPMENT AND PACKING: 25 KG (50 LB) SEALED MULTI-WALL PAPER BAG

(WITH INNER POLYETHYLENE BAG TO PREVENT MOISTURE CONTACT), SHIPMENT

OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.

1000021930





9COM/9CAT

75Chemicals

(Drilling Fluids)ORGANOPHILIC CLAY - 400F

INVERTED EMULSION MUD COMPONENTS: 25 KG (50 LB) BAG; POWDER; DRY

WHITE, ADMIXTURE DRILLING MUD; WHITE, DRY, FREE FLOWING POWDER, FREE

OF LUMPS FORM,OIL-BASED DRILLING FLUID GELLING AGENT,FOR HELPS

VISCOSIFY ANY OIL- BASED DRILLING FLUIDS HELPS IMPROVED HOLE CLEA- NING

DURING DRILLING AND WORKOVER OPERATIONS DRILL OIL MUDS FOR LONG

TERM SUSPENSION OF WEIGHTING AGENTS IN PACKER FLUIDS & CASING

PACKS.,AMINE TREATED BETONITE, A BENTONITE CLAY THAT HAS BEEN TREATED

WITH AN AMINE COMPOUND TO PROMOTE ITS DISPERSION/YIELD IN OILS.,22.7

KG (50 LB) MULTI-WALL SACKS.,SPECIFIC GRAVITY: 1.57 TO 1.70 APPEARANCE:

OFF-WHITE TO TAN POWDER ODOR/TASTED: SLIGHT, AMINE SOLUBILITY:

INSOLUBLE IN WATER DISPERSIBLE IN ORGANIC SOLVENTS. DECOMPOSITION

TEMP: >200C DEG FLASH POINT: NON- FLAMMABLE REACTIVITY: CHEMICALLY

STAB,ORGANOPHILIC CLAY, USED TO IMPART VISCOSITY AND SUSPENSION

PROPERTIES TO OIL-BASED DRILLING FLUIDS ORGANOPHILIC CLAY VISCOSIFIER

TEMPERATURE APPROACHING APPROACHING 400 F DEG (20C DEG) IMPROVES

FILTER. CAKE QUALITY AND FILTARATION-CHARACTERISTICS PROVIDES GEL-

STRUCTURE AND VISCOSITY FOR THE- SUSPENSION OF WEIGHT MAERIALS

VICOSITY FOR IMPROVED- HOLE CLEANING CAPACITY EFFECTIVE GELLING AGENT

IN CASING PACKS AND PACKER FLUIDS.

1000022174

76Chemicals

(Drillning Fluids)LUBRICANT WBM

LUBRICANT: DRILLING MUD; DIAMINE AND FATTY ACID WITH ALCOHOL AMIDE IN

VEGETABLE OIL LUBRICANT; DRILLING MUD TYPE,LIQUID, SOLIDS FREE, AMBER

FORM,208.2 L (55 GAL) DRUM,NON-TOXIC LUBRICANT FOR REDUCING

ROTATIONAL TORQUE, DRAG AND BIT BALLING, CAUSE NO ADVERSE EFFECTS ON

MUD PROPERTIES AND CAN BE USED IN ALL DIFFERENT TYPES OF WATER-BASED

FLUIDS. THE PRODUCT MUST BE EFFECTIVE OVER A WIDE TEMPERATURE RANGE

IN THE PRESENCE OF CONTAMINANTS INCLUDING HIGH SOLIDS, HIGH CALCIUM

OR MAGNESIUM. SHOULD NOT CAUSE FOAM OR GREASE OUT. DRUMS MUST BE

MARKED WITH: VENDORS'S NAME & LOCATION, PRODUCTION DATE, BATCH NO.,

PURCHASE ORDER NO., AND STOCK NO.

1000022179





9COM/9CAT

77Chemicals

(Drilling Fluids )CEMENT CLASS "G", Bulk

ADDITIVE: CEMENT; BULK DELIVERY IN TN. CEMENT; OIL WELL TYPE,BULK

TONS,API SPEC 10 CL G TYPE HSR,HIGH SULPHATE-RESISTANT. PRODUCT

MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF

ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL

MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF

MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE

CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000022631

78Chemicals

(Drilling Fluids)

POTASSIUM FORMATE (75% SOL,

WATER 25%)

ADMIXTURE DRILLING MUD; LIQUID FORM,POTASSIUM FORMATE SOLUTION

(KCOOH & H20),FOR FORMULATING SOLIDS FREE WORKOVER FLUIDS FOR USE IN

THE KHUFF AND PRE-KHUFF FORMATION,POTASSIUM FORMATE 75% AND

WATER 25% SOLUTION, CLEAR LIQUID, DENSITY 1570 KG/M3 @ 20 DEG C, PH

10.0 @ 25 DEG C,1000 LITER (1570 KG) IBC OR TOTE CONTAINER (CO),IRON LESS

THAN 10 PPM, CHLORIDE CONTENT LESS THAN 40 PPM, TURBIDITY MAX 10 NTU,

SOLUBLE IN ALL PROPORTIONS IN WATER EXPORT PACKING MANUAL.

1000774250

79Chemicals

(Drilling Fluids)

POTASSIUM FORMATE CRYSTALS

(97% KCOOH)

ADMIXTURE DRILLING MUD; FREE FLOWING SOLID CRYSTALS FORM,POTASSIUM

FORMATE 97% WEIGHT (KCOOH),FOR FORMULATING SOLIDS FREE WORKOVER

FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION,POTASSIUM

FORMATE 97% WEIGHT & CONDITIONING AGENT 3% WEIGHT, POWDER, WHITE

COLOR, BULK DENSITY 1080 KG/M3,25 KG MULTI-WALL SACK,SPECIFIC GRAVITY

(POWDER ONLY) 1.91, SOLUBILITY IN WATER 355 GR/100 ML @ 20 DEG C ,

MELTING POINT 169 DEG C TEMPERATURE STABILITY UP TO 400 ░F (204 ░C),


MANUAL.

1000774251

80Chemicals

(Drilling Fluids)

SODIUM FORMATE POWDER

(98% NACOOH)

ADMIXTURE DRILLING MUD; FREE FLOWING GRANULES FORM,SODIUM

FORMATE POWDER 98% (NACOOH),FOR FORMULATING SOLIDS FREE WORKOVER

FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION,SODIUM FORMATE

98% WEIGHT & OTHER ORGANICS 2% WEIGHT, WHITE COLOR, BULK DENSITY 900-

950 KG/M3,25 KG MULTI-WALL SACK,SPECIFIC GRAVITY (POWDER ONLY) 1.92,

SOLUBILITY IN WATER 81GR/100 ML @ 20 DEG C , MELTING POINT 253 DEG C ,

TEMPERATURE STABILITY UP TO 400 ░F (204 ░C), SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI ARAMCOEXPORT PACKING MANUAL.

1000774252





9COM/9CAT

81Chemicals

(Drilling Fluids)LIGNITE

ADDITIVE DRILLING FLUID; POWDER FORM,LIGNITE / CRYSTALLINE SILICA,

QUARTZ,FOR USED TO AID IN FILTRATION CONTROL AND CONTROL VISCOSITY

AND GEL STRENGTHS OF WATER-BASED DRILLING FLUIDS,SACK PACKING (25 KG

OR 50 LB),USED TO APPEARANCE: BLACK POWDER, COLOUR: BLACK,

ODOUR/TASTE: ODORLESS, SPECIFIC GRAVITY: 1.7, SOLUBILITY IN WATER:

INSOLUBLE, BULK DENSITY AT 20 DEG C: 40 LBS/FT3, USED TO EMULSIFY OIL INTO

WATER-BASED FLUIDS, SHIPMENTS OF PRODUCT SHALL CONFORM TO SAUDI

ARAMCO EXPORT PACKING MANUAL.

1000827162

82Chemicals

(Drillning Fluids)

CALCIUM BROMIDE (SOL 53% WT

MINIMUM)

ADMIXTURE: DRILLING MUD; 208 LITER (55 GAL) DRUM. CALCIUM BROMIDE

ADMIXTURE DRILLING MUD; SINGLE SALT (CABR2), SOLIDS-FREE BRINE

FORM,CALCIUM BROMIDE (CABR2),FOR A SOLIDS-FREE BRINE USED IN

COMPLETION FLUIDS AND CAN BE BLENDED WITH ZINC/CALCIUM BROMIDE AND

CALCIUM CHLORIDE SOLUTIONS TO FORMULATE NON- DAMAGING FLUIDS OF

DENSITIES 87.5 PCF (11.7 LB/GAL) TO 113 PCF (15.1 LB/GAL),CALCIUM BROMIDE

(53% SOLUTION),208 L OR 55 GAL OR 340 KG DRUM,POLYPROPYLENE-LINED

STEEL DRUMS.

1000021557

83Chemicals

(Drilling Fluids)

POLYANIONIC CELLULOSE

REGULAR (PAC-R)

ADMIXTURE: DRILLING MUD POLYANIONIC CELLULOSE DERIVATIVE (REGULAR)

PAC-R ADMIXTURE DRILLING MUD; DRY, FREE FLOWING POWDER

FORM,POLYANIONIC CELLULOSE,FOR USED AS A FILTRATE REDUCER AND

SUPPLEMENTARY VISCOSIFIER TO FORM A THIN, RESILIENT FILTER CAKE. IT IS

EFFECTIVE IN FRESH WATER, SEA WATER AND SALT SATURATED FLUIDS,PURE,

SALT-FREE POLYANIONIC CELLULOSE POLYMER,MULTI-WALLED BAGS, 25 KG OR

50 LB BAG,API 13 I SUPPLEMENT-2, SECTION 22 (MAY, 2000 OR LATEST

EDITION),OTHER ASSOCIATED ELEMENTS IN THE COMPOSITION MUST NOT BE

HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.

PROPER TUBE SAMPLING AND QUARTERING TO BE CARRIED OUT BY TRAINED

AND EXPERIENCED PERSONNEL. POLYANIONIC CELLULOSE, PAC-R SHALL NOT

CONTAIN ANY OTHER POLYSACCHARIDES SUCH AS STARCH, GUAR, OR OTHER

POLYMERS OR THEIR DERIVATIVES NOTE: THE CONSTRUCTION OF THE MULTI-

WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN.

NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT

PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND

CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE

RESIN MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1 MM. 4TH PLY 50 LB

MIN.

1000021605





9COM/9CAT

84Chemicals

(Drilling Fluids)CHROME FREE LIGNOSULFONATE


CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; POWDER

FORM,MODIFIED CHROME FREE LIGNOSULFONATE,FOR DISPERSANT FOR

REDUCING VISCOSITY & GELS IN SALTY, GYPPY & FRESH WATER MUDS,25 KG OR

50 LB BAG,API 13A,FREE FLOWING, SHIPMENT OF PRODUCT SHALL CONFORM TO

SAUDI ARAMCO EXPORT PACKING MANUAL NOTE: THE CONSTRUCTION OF THE

MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB

MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL

KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED

AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF

POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM.

4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT

PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT TYPE,

COMPLETELY SEALED, MOISTURE AND WATER PROOF.

1000021670

85Chemicals

(Drilling Fluids )

MARBLE FINE, PURE CaCO3 -

2200 LB BAGS

ADMIXTURE: DRILLING MUD; GROUND MARBLE: FINE GRADE; 9-11 MICRON

PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD; DRY, FREE

FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)

METAMORPHOSED,FOR USED AS WEIGHTING, BRIDGING AND FILTRATE CONTROL

AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS,GROUND

MARBLE FINE, 9-11 MICRON PURE METAMORPHOSED CALCIUM CARBONATE

CACO3 & CAMG (CO3)2,BREATHLESS 1000 KG OR 2200 LB BAG,PROPERLY

LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION,

PRODUCTION DATE,BATCH NO. AND STOCK NO. SIZED METAMORPHIC CALCIUM

CARBONATE GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT

ACCEPTABLE 9-11 MICRON PARTICLE, 95% SOLUBLE IN 15% HCL ACID, TYPE

"MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE, WATERPROOF, UV

STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT, MINIMUM TENSILE

STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO SUSTAIN NORMAL

HANDLING & OUTDOOR STORAGE FOR THE PRODUCT'S SHELF LIFE IN SAUDI

ARABIAN CLIMATIC CONDITIONS.PRODUCT MANUFACTURER AND OR SUPPLIER

REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF

ORIGIN (COO).THE DISPOSABLE SUPER SACKS SHOULD HAVE AT# LEAST 75% OF

THEIR SHELF LIFE REMAINING (THE # PERIOD FROM THE DATE OF MANUFACTURE

TO# THE WARRANTED EXPIRATION DATE) WHEN # SHIPPED OR RECEIVED AT

DESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.

1000021813





9COM/9CAT

86Chemicals

(Drilling Fluids)DETERGENT

AGENT: WELL STIMULANT; 20 LITER (5GAL.) CAN. . AGENT WELL STIMULANT; FOR

SURFACTANT & DETERGENT FOR DRILLING WATER & LOW SOLID MUD,LIQUID

FORM,20 L OR 5 GAL CAN.

1000021975

87Chemicals

(Drilling Fluids )NON-IONIC POTATO STARCH

ADMIXTURE: DRILLING MUD; 25 KG BAG; POTATO STARCH STABLE AGAINST

BACTERIA ADMIXTURE DRILLING MUD; DRY, FREE FLOWING COARSE

GRANULATED POWDER FORM,POTATO STARCH,FOR PROVIDES FILTRATE

CONTROL W/MINIMUM VISCOSITY BUILDUP. THE PRODUCT IS A NON-IONIC

POLYMER USED IN WATER- BASED FLUIDS WITH HIGH CONCENTRATIONS OF

MONOVALENT AND DIVALENT CATIONS OR COMBINATIONS OF ELECTROLYTES

AND IN CLAY-FREE, NON-DISPERSIVE SYSTEMS,POTATO STARCH,25 KG OR 50 LB

BAG,NO PARTICLES (RESIDUE) GREATER THAN 2000 MICROMETERS SHIPMENT OF

PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.

MULTI-WALLED BAGS, SEALED WITH INNER POLYETHYLENE COATING, MAIN

COMPONENT PREGELATINZED, NON- FERMENTING POTATO CONSTRUCTION OF

THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50

LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL

KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED

AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF

POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1

MM. 4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB MIN. NATURAL

KRAFT PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT

TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF.

1000022170

88Chemicals

(Drilling Fluids)

CALCIUM CHLORIDE (77-78%)

2200 lb/BAG

ADMIXTURE, CEMENT: ADDITIVE, CEMENT, 1000 KG PER BAG, CALCIUM

CHLORIDE ADMIXTURE CEMENT; FOR WATER SOLUBLE WEIGHTING AGENT FOR

FORMULATING SOLIDS-FREE COMPLETION BRINES AND TO PROVIDE THE DESIRED

WATER PHASE ACTIVITY IN INVERT EMULSION MUDS. ALSO USED AS AN

ACCELERATOR IN OIL WELL CEMENT SLURRIES,TYPE 1,77-78% CALCIUM

CHLORIDE (CACL2), FLAKES OR PELLETS,1000 KG OR 2200 LBS BAG,ASTM D98-

68,LIFTING STRAP, BAG IS DISPOSABLE, TOP CLOSURE WATERTIGHT, STACKABLE

& WITHOUT BOTTOM SPOUT, MINIMUM TENSILE STRENGTH FACTOR 5,

FLEXURAL STRENGTH FOR NORMAL HANDLING & OUTSIDE STORAGE NO

PARTICLES GREATER THAN 2MM IN ANY DIMENSION, MULTI-WALL MOISTURE-

PROOF POLYETHYLENE LINED BAGS W/LIFTING STRAPS, WITHOUT BOTTOM

SPOUT. DRY, FREE FLOWING FLAKES, GRANULES OR PELLETS.

1000022533





9COM/9CAT

89Chemicals

(Drilling Fluids)NVIS HI - 50 LB

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SILICATE,FOR VISCOSIFIER

USED IN MILLING CASING WINDOWS,CALCIUM ALUMINOSILICATE,50 LB SEALED

MULTI-WALL PAPER BAG,GRAY COLOR, SPECIFIC GRAVITY 0.6@ 20 DEG C, PH 11,

INSOLUBLE IN WATER, ODERLESS, SHIPMENT OF PRODUCT SHALL CONFORM TO

SAUDI ARAMCO EXPORT PACKING MANUAL THE ORIGINAL MANUFACTURER ,

PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL,

EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN BE

PRINTED ON THE CONTAINER, THE CONSTRUCTION OF THE MULTI-WALLED

PAPER BAG FOLLOWS: (CONTAINER) SHALL BE AS 1ST PLY 50 LB MIN. NATURAL

KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD

PLY SEPARATE INNER BAG LINER , HIGH DENSITY ORIENTED AND CROSS-

LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN

MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1 MM. 4TH PLY 50 LB MIN.

1000757569

90Chemicals

(Drilling Fluids)H2S SCAVENGER, POWDER

ADMIXTURE DRILLING MUD; POWDER, GRANULAR FORM,ORGANOMETAL,FOR

SCAVENGES HYDROGEN SULFIDE FROM DRILLING FLUIDS,IRON GLUCONATE,25

KG SEALED MULTI-WALL PAPER BAG,SOLID, LIGHT YELLOW GREEN COLOR, BULK

DENSITY 650 - 850 KG/M3 @ 20 DEG C, PH 4.5 (1% AQUEOUS SOLUTION),

SOLUBLE IN WATER, MILD BURNT SUGAR ODOR, SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL THE ORIGINAL

MANUFACTURER , PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF

MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF

ORIGIN BE PRINTED ON THE CONTAINER, THE CONSTRUCTION OF THE MULTI-

WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS 1ST PLY 75 LB MIN.

NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT

PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND

CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE

RESIN MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 80 LB

MIN. NATURAL KRAFT PAPER (EXTERIOR PLY).

1000757581





9COM/9CAT

91Chemicals

(Drilling Fluids)ACID SOLUBLE FIBER

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SPUN MINERAL FIBER,FOR

CONTROLS SEEPAGE, BRIDIGING, PLUGGING VOIDS, FRACTURES DURING

WORKOVER OPERATIONS,CRYSTALLINE SILICA, QUARTZ AND BLAST FURNACE

SLAG,30 LB SEALED MULTI-WALL PAPER BAG,WHITE TO GRAY COLOR, SPECIFIC

GRAVITY 2.6@ 20 DEG C, PH 7-8, BULK DENSITY 12-26 LBS/GALLON @ 20 DEG C

INSOLUBLE IN WATER, ODERLESS, SHIPMENT OF PRODUCT SHALL CONFORM TO

SAUDI ARAMCO EXPORT PACKING MANUAL THE ORIGINAL MANUFACTURER ,


EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN BE

PRINTED ON THE CONTAINER, THE CONSTRUCTION OF THE MULTI-WALLED

PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 30 LB MIN. NATURAL

KRAFT PAPER (INTERIOR PLY) 2ND PLY 30 LB MIN. NATURAL KRAFT PAPER 3RD

PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-

LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN

MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 30 LB MIN.

NATURAL KRAFT PAPER. 5TH PLY 30 LB MIN. NATURAL KRAFT PAPER WET

STRENGTH (EXTERIOR PLY).

1000757582

92Chemicals

(Drillning Fluids)

ALCOHOL AND FATT ACID

DEFOAMER

ADMIXTURE: DRILLING MUD; ORGANOSILICONE, HIGH MOLECULAR

WEIGHTALCOHOL & MODFD FATTY ACID DERIVATIVESADMIXTURE DRILLING

MUD; LIQUID FORM,CRUDE OIL AQUEOUS SOLUTION &WATER-BASE DRILLING

FLUID,FOR DEFOAMER,CRUDE OIL AQUEOUSSOLUTION & WATER-BASE DRILLING

FLUID,55 GAL DRUM,TO REMOVESURFACE AERATION & FOAM IN FRESHWATER,

SEAWATER & BRINE-BASEDDRILLING, COMPLETION & WORKOVER FLUIDS,

REDUCE FOAMINGTENDENCIES OF FLUIDS PREPEARED BY VIGOROUS MIXING OR

AGITATIONAND VISCOSIFIED WITH POLYMERS SUCH AS XANTHAN GUM, HEC,

STARCH,CMC AND PAC, MUST BE MISCIBLE IN WATER, EFFECTIVE

INREMOVINGDISSOLVED OXYGEN AND FOAM WITH SMALL

CONCENTRATIONS,SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO

EXPORT PACKINGMANUAL, MUST BE MARKED WITH: MANUFACTURER'S NAME &

LOCATION,PRODUCTION DATE, BATCH NO.,PURCHASE ORDER NO. AND SAUDI

ARAMCOSTOCK NO.

1000021604





9COM/9CAT

93Chemicals

(Drilling Fluids)SULPHONATE ASPHALT


CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; BLACK, DRY,

FREE FLOWING POWDER OR FLAKES, FREE OF LUMPS FORM,MODIFIED

HYDROCARBON COMPOUND SODIUM ASPHALT SULPHONATE. OTHER

ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR

ADVERSELY AFFECT FLUID PROPERTIES.,FOR STABILIZES SHALE FORMATIONS

REDUCES TORQUE AND DRAG, INHIBITS THE DISPERSION OF DRILL SOLIDS,

REDUCES FILTRATE, EMULSIFIER COMPATIBLE TO ALL MUD SYSTEMS, AS IT IS

SOLUBLE IN BOTH OIL & WATER. HAS GOOD EMULSIFYING CHARACTERISTICS.

REDUCES THE FREQUENCY OF STUCK PIPE HAS NO ADVERSE EFFECTS ON MUD

PROPERTIES.,A BLEND OF HYDROXYLATED SODIUM ASPHALT SULPHONATE WITH

MINOR AMOUNTS OF ASPHALT PHENALATES, INORGANIC SALTS & OXIDIZED

ASPHALT. EXHIBITS SOME FLUORESCENCE. HOWEVER, THIS PROBLEM IS USUALLY

ELIMINATED THROUGH THE WASHING OF CUTTINGS.

1000021607

94Chemicals

(Drilling Fluids)

HYDRATED CALCIUM SULFATE -

GYPSUM

ADMIXTURE: DRILLING MUD; 25 KG/SACK; CALCIUM SULFATE (GYPSUM)

ADMIXTURE DRILLING MUD; DRY, FREE FLOWING FINE WHITISH POWDER

FORM,HYDRATED CALCIUM SULFATE,FOR A SOURCE OF CALCIUM IONS TO TREAT

CARBONATE CONTAMINATION IN HIGH PH MUDS, AND TO AVOID HOLE

ENLARGEMENT WHEN ANHYDRITE IS DRILLED,25 KG OR 55 LBS/SACK,SHIPMENT

OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL

MULTI-WALLED PAPER BAGS, CONTAINER PROPERLY LABELED, W/VENDOR'S

NAME, MANUFACTURER'S NAME LOCATION, PRODUCTION DATE AND BATCH

NO.,SAUDI ARAMCO STOCK NUMBER AND SAUDI ARAMCO P.O. NUMBER NOTE:


AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY

75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER

(EXTERIOR BF PLY) THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED,

PACKING SPEC CODES 8444-18 APPLIES.

1000021559





9COM/9CAT

95Chemicals

(Drilling Fluids )GRAVEL PARTICLE 8.0-12 MM

ADMIXTURE DRILLING MUD; GRAVEL SOLID FORM,GRAVEL: PARTICLE SIZE 8.0-12

MM,FOR TO BE USED IN PERFORMING SECOND STAGE CEMENTING JOBS ON 9-

5/8, 13-3/8 AND 18-5/8 INCH CASING BY USING THE BRIDGING PLATE,SIZED

LIMESTONE, MARBLE SILICA OR BLENDS, SILICA 90 - 97%, SIO2, TYPICAL SG 2.62,

INSOLUBLE IN WATER,25 KG PER SACK,GRAVEL MADE FROM

LIMESTONE,MARBLE, SILICA, OR ANY ROCKGRAVEL MUST BE PREPARED BY USING

10,000 MICRON AND 8,000 MICRON SIEVES THE GRAVEL RETAINED ON TOP OF

THE 8,000 MICRON SIEVE IS TO BE COLLECTED AND SACKED WHILE THE GRAVEL

RETAINED ON TOP OF THE 10,000 MICRON SIEVE SHOULD BE DISCARDED

AUTHORIZED SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING

AND TESTING, AS NEEDED.THE CONSTRUCTION OF THE MULTI-WALLED PAPER

BAG(CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT

PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB

MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER

POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY

SEALED.

1000775550

96Chemicals

(Drilling Fluids )GRAVEL PARTICLE 18.0- 26.5 MM

ADMIXTURE DRILLING MUD; GRAVEL SOLID FORM,GRAVEL: PARTICLE SIZE 18.0 -

26.5 MM,FOR TO BE USED IN PERFORMING SECOND STAGE CEMENTING JOBS ON

9-5/8, 13-3/8 AND 18-5/8 INCH CASING BY USING THE BRIDGING PLATE,SIZED

LIMESTONE, MARBLE SILICA OR BLENDS, SILICA 90 - 97%, SIO2, TYPICAL SG 2.62,

INSOLUBLE IN WATER,25 KG PER SACK,GRAVEL MADE FROM

LIMESTONE,MARBLE, SILICA, OR ANY ROCKGRAVEL MUST BE PREPARED BY USING

MUST BE PREPARED BY USING FOUR SIEVES 26.5 MM, 22.4 MM, 20 MM, AND 18

MM. THE GRAVEL RETAINED ON TOP OF THE 22.4 MM,20 MM AND 18 MM

SIEVES SHOULD BE COLLECTED AND SACKED WHILE THE GRAVEL RETAINED ON

TOP OF THE 26.5 MM SIEVE SHOULD BE DISCARDED. AUTHORIZED SAUDI

ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING, AS

NEEDED.THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG(CONTAINER)


PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL

KRAFT PAPER (EXTERIOR PLY).

1000775551





9COM/9CAT

97Chemicals

(Drilling Fluids )

Calcium Carbonate 5, 5 MICRON -

50 LB

ADMIXTURE DRILLING MUD; WHITE POWDER GRANULES, 5 MICRONS

FORM,CALCIUM CARBONATE,FOR BRIDGING AGENT FOR FLUID LOSS CONTROL,

INCREASE DENSITY OF BRINE, WATER AND OIL BASED MUDS,SIZED CALCIUM

CARBONATE POWDER,50 LB. BAG,SG 2.7, PARTICLES SIZE: 5 MICRONS, SHIPMENT

OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.

THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL, BATCH

NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED,

STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER

ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. THE

CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS

FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY -

75 BLMIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER

(EXTERIOR PLY) THE BAG DOES NOT HAVE INNER POLYETHYLENE LINER.

1000775558

98Chemicals

(Drilling Fluids )

Calcium Carbonate 25, 25

MICRON - 50 LB




CARBONATE POWDER,50 LB. BAG,SG 2.7, PARTICLES SIZE: 25 MICRONS,


MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL,

BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF

REQUIRED, STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE

CONTAINER ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. THE



75 LBMIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER

(EXTERIOR PLY) THE BAG DOES NOT HAVE INNER POLYETHYLENE LINER.

1000775559





9COM/9CAT

99Chemicals

(Drilling Fluids )

Calcium Carbonate 50, 50

MICRON - 50 LB




CARBONATE POWDER,50 LB. BAG,SG 2.7, PARTICLES SIZE: 50 MICRONS,


MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL,

BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF

REQUIRED, STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE

CONTAINER ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. THE



75 LBMIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER

(EXTERIOR PLY) THE BAG DOES NOT HAVE INNER POLYETHYLENE LINER. THE BAG

MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.

1000775560

100Chemicals

(Drilling Fluids)

XANTHAN GUM (LIQUID

SUSPENSION)

ADDITIVE; 5 GAL PER PAIL,ADDITIVE: DRILLING MUD LIQU XANTHAN GUM USED

TO BUILD VISCOSITY AND GEL STRENGTH IN WATER BASED DRILLING WORKOVER

AND COMPLLETION FLUIDS. ALSO UNIQUE WITH ITS ABILITY TO FLOW AND MIX

HOMOGENOUSLY WITHOUT CREATING "LUMP"AND PROVIDES LOW-SOLIDS

CONTENTS IN THE MIXED FLUID 5 GAL/PAIL. APPEARANCE: CREAM LIQUID,

SG@20C (WATER=1): 0.95-1.05 SOLUBILITY IN WATER: MISCIB PH: (1%SOL.IN DIS

WATER, 77.

1000815368

101Chemicals

(Drillning Fluids)

HEMATITE IRON OXIDE FE2O3 -

1000 KG BAG

ADDITIVE, DRILLING FLUID: ADDITIVE, FLUID, HIGH DENSITY WEIGHTING AGENT

2200 LBS (1000 KG) ADDITIVE DRILLING FLUID; DRY, FREE FLOWING POWDER

FORM,FOR FOR INCREASING DRILLING FLUID DENSITIES UP TO 194 PCF (26

LB/GAL),2200 LBS (1000 KG) BAGS,API 13A SECTION 3 (MAY, 1993) OR LATEST

EDITION,ADDITIVE, FLUID, HIGH DENSITY WEIGHING AGENT, HEMATITE (IRON

OXIDE) CONTAINS VERY LITTLE TRACES OF COMMON MATERIALS (SILICON OXIDE,

ALUMINUM OXIDE, CALCIUM OXIDE, MAGNESIUM OXIDE). OTHER ASSOCIATED

ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND /OR ADVERSELY AFFECT

FLUID PROPERTIES. PHYSICAL AND CHEMICAL REQUIREMENTS: X-RAY: IRON

OXIDE (FE2O3) 95% WT MIN. SP GR 5.05 GM/CC MIN. WATER SOLUBLE ALKALINE

EARTH METALS: CALCIUM 100 MG/KG, MAX PARTICLE SIZE: RESIDUE GREATER

THAN 75 MICRONS 1.5 % WT MAX. RESIDUE GREATER THAN 45 MICRONS 15%

WT MAX. PARTICLES LESS THAN 6 MICRONS 15% WT MAX.

1000022425





9COM/9CAT

102Chemicals

(Drilling Fluids)

SIZED CACO3 AND POLYMERS

LCM

ADMIXTURE DRILLING MUD; ADMIXTURE FORM,BLEND OF SIZED CACO3 AND

POLYMERS,FOR REDUCES FLUID INVASION WITHOUT DAMAGING THE

FORMATION BY SEALING GAUGE SCREEN FROM INTERNAL SIDE TO BE EASILY

REMOVED WITH PRODUCTION FLUID FLOW.,BLEND OF SIZED CACO3 AND

POLYMERS,BBL.

1000876985

103Chemicals

(Drilling Fluids)

Spacer-Tek - SBP-9125

SURFACTANT

AGENT WELL STIMULANT; FOR MIXED WITH OTHER SURFACTANTS TO PROVIDE

OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD SURFACTANT WITH

LOWER HLB NUMBER FOR LOWER TEMPERATURE CLEANING APPLICATION

SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER,

SBP-101 SOLVENT, SBP,ETHOXYLATED ALCOHOL BASE,LIQUID

FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 0.92 PH:

7-8 PLASH POINT: 255 F.

1000877462

104Chemicals

(Drilling Fluids)


SURFACTANT


OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD OVER A WIDE RANGE

OF TEMPERATURES SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-

85 GEL-E POLYMER, SBP-101 SOLVENT, SBP-4620 SURFACTANT, SBP-9125

SURFACTANT SBP,BLEND OF NON-IONIC SURFACTANTS AND LINEAR ALCOHOL CO-

SOLVENT,LIQUID FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION

DENSITY: 1.002 PH: 7-8 PLASH POINT: > 200 F.

1000877461

105Chemicals

(Drilling Fluids)Spacer-Tek - SBP-101 SOLVENT

AGENT WELL STIMULANT; FOR USED AS THE PRIMARY CLEANING PILL FOR

DISPLACEMENT CLEANUP OF SYNTHETIC AND OIL-BASED DRILLING MUD. THE

SOLVENT PRODUCT IS TYPICALLY MIXED WITH BRINE TO PROVIDE DISPERSED

MACRO DROPLETS OF SOLVENT IN BRINE AND ALSO A HIGHER SOLVENT PILL

DENSITY FOR SUPER,BLENDS OF SURFACTANTS AND SOLVENTS,LIQUID

FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 0.85-

0.87 PLASH POINT: 122 F.

1000877460

106Chemicals

(Drilling Fluids)Spacer-Tek - SBP-SPACER MIX

AGENT WELL STIMULANT; FOR TO DEVELOP THE VISCOSITY AND GELLING AND TO

BE EASILY HYDRATED EVEN UNDER A LIMITED MIXING CONDITION. ALSO, IT

ENHANCES THE HIGH TEMPERATURE VISCOSITY PERFORMANCE IN SOLID-FREE

POLYMER GEL. TYPICAL TREATMENT: 8-25 LB/BBL. SPACER-TEK SYSTEM CONSISTS

OF,PATENTED BLEND OF VISCOSIFIERS AND DISPERSANT,POWDER

FORM,BAG,APPEARANCE: BEIGE-COLORED P S.G.: 1.76.

1000877299





9COM/9CAT

107Chemicals

(Drilling Fluids)Spacer-Tek - SBP-600 BIOCIDE

AGENT WELL STIMULANT; FOR TO CONTROL ALL FORMS OF BACTERIA WHICH IS

PARTICULARLY DETRIMENTAL IN FRESH AND BRINE-WATER DRILLING AND

PACKER FLUIDS TYPICAL TREATMENT: 5 GAL/100 BBL. SPACER-TEK SYSTEM

CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101 SOLVENT, SBP

4620,BLENDED ORGANIC SULFUR ANTIMICROBIAL AGENT,POWDER

FORM,PAIL,APPEARANCE: WHITE CRYSTAL SPECIFIC GRAVITY: 0.96.

1000877298

108Chemicals

(Drilling Fluids)Spacer-Tek - SBP-85 GEL-E

AGENT WELL STIMULANT; FOR NON-DAMAGING VISCOSIFIER THAT READILY

DISPERSIBLE IN ALL BRINE SYSTEMS AND EASIER TO USE THAN DRY VISCOSIFIERS .

IT IS SOLUBLE IN HYDROCHLORIC, ACETIC AND FORMIC ACIDS AND DEGRADABLE

AT TEMPERATURES ABOVE 275°F,BLEND OF XANTHAN GUM/ORGANIC

SOLVENT,LIQUID FORM,PAIL,APPEARANCE: BEIGE COLORED SPECIFIC GRAVITY:

1.07 PH: 7 FLASH POINT: 160 F.

1000877297

109Chemicals

(Drilling Fluids)Spacer-Tek - SBP-24 DEFOAMER

AGENT WELL STIMULANT; FOR TO CONTROL FOAMING IN SPACER OR CLEANING

FLUID FORMULATIONS TYPICALLY TREATMENT: 100-500 PPM. SPACER-TEK

SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101

SOLVENT SBP-4620 SURFACTANT, SBP-9125 SURFACTANT, SBP-9755 SURFACTANT

SBP-600,SILICONE EMULSION BASE,LIQUID FORM,PAIL,APPEARANCE: WHITE

CREAMY SPECIFIC GRAVITY: 0.99 PH: 7-8.

1000877296

110Chemicals

(Drilling Fluids)


SURFACTANT


OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD OVER A WIDE RANGE

OF TEMPERATURES. SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER ,SBP-

85 GEL-E POLYMER, SBP-101 SOLVENT, SBP-4620 SURFACTANT, SBP-9125

SURFACTANTS,ALKYL POLYGLUCOSIDE BASE,LIQUID FORM,DRUM,APPEARANCE:

LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 1.1 PH: 7-8 PLASH POINT: 212 F.

1000877463

111Chemicals

(Drilling Fluids)

MODIFIED POLYMER FOR FLUID

LOSS

ADDITIVE DRILLING FLUID; POWDER FORM,BLEND OF MODIFIED POLYMERS,FOR

PROVIDES CENTRAL TO THE ULTRA-LOW INVASIVE FLUID AND GREATLY REDUCES

FLUID INVASION INTO MATRIX. TYPICAL TREATMENT: 3- 8 LB/BBL.,BLEND OF

MODIFIED POLYMERS,25 POUND MULTI-WALLED SACKS,APPEARANCE: POWDER

TO FLAKE. SPECIFIC GRAVITY: 1.0.

1000883084





9COM/9CAT

112Chemicals

(Drilling Fluids)LUBRICANT OBM

ADDITIVE DRILLING FLUID; LIQUID FORM,MIXTURE OF FATTY ACIDS AND

SPECIALTIES,FOR DRILLING LUBE IS USED TO HELP IMPROVE LUBRICITY OF OIL-

BASED MUD SYSTEMS, THEREBY HELPING TO REDUCE TORQUE AND DRAG, AND

REDUCING RISK OF DIFFERENTIAL STICKING IN DEEP, TORTUOUS, HIGH ANGLE OR

EXTENDED REACH WELLS,MIXTURE,55-GALLON (208 LITRE) DRUM,APPEARANCE:

AMBER LIQUID. POUR.

1000885304

113Chemicals

(Drilling Fluids)THERMASET 100-2

ADDITIVE DRILLING FLUID; LIQUID FORM,POLYESTER RESIN BASE,FOR THERMALLY

ACTIVATED LIQUID LOST CIRCULATION MATERIAL THAT MAKES AN

INSTANTANEOUS SEAL ACROSS ANY FRACTURE OR VUGS TO STOP

LOSTCIRCULATION OF DRILLING FLUID AND ALSO SEAL OFF CASING

LEAKS.,POLYESTER RESIN BASE,IBC,APPEARANCE: YELLOW LIQUID. DEN,WORKING

TEMPERATURE RANGE IS 212 °F - 302 °F FOR HIGH TEMPERATURE APPLICATIONS.

THERMASET SYSTEM CONSISTS OF THERMASET 100-2 OR 55-4, AEROSOL 200,

NORPOL PEROXIDE 40(CI 40), DIBENZOYL PEROXIDE (CI 65) MICROMAX FILLER

AND GLASS FILLER.

1000888051

114Chemicals

(Drilling Fluids)THERMASET 55-4

ADDITIVE DRILLING FLUID; LIQUID FORM,POLYESTER RESIN BASE,FOR THERMALLY

ACTIVATED LIQUID LOST CIRCULATION MATERIAL THAT MAKES AN

INSTANTANEOUS SEAL ACROSS ANY FRACTURE OR VUGS TO STOP LOST

CIRCULATION OF DRILLING FLUID AND ALSO SEAL OFF CASING LEAKS.,POLYESTER

RESIN BASE,IBC,APPEARANCE: YELLOW LIQUID. DEN,WORKING TEMPERATURE

RANGE IS 140 °F - 275 °F FOR LOW TEMPERATURE APPLICATIONS. THERMASET

SYSTEM CONSISTS OF THERMASET 100-2 OR 55-4, AEROSOL 200, NORPOL

PEROXIDE 40(CI 40), DIBENZOYL PEROXIDE (CI 65) MICROMAX FILLER AND GLASS

FILLER.

1000888052

115Chemicals

(Drilling Fluids)THERMASET Glass Filler

ADDITIVE DRILLING FLUID; SOLID (PULVERIZED POWDER) FORM,GLASS

BEADS,FOR IT IS CHEMICALLY INERT WEIGHTING MATERIAL FOR LOW DENSITY

FLUIDS. IT IS USED IN THERMASET LCM SYSTEM. IT IS STABLE AT TEMPERATURES

UP TO 1112 °F.,GLASS BEADS,BAG,APPEARANCE: SOLID CLEAR AND ODORLESS.

SG1: 0.

1000888050

116Chemicals

(Drilling Fluids)THERMASET Aerosol/orisil 200

ADDITIVE DRILLING FLUID; SOLID FORM,SILICON DIOXIDE,FOR ESPECIAL

VISCOSIFIER FOR THERMASET LCM SYSTEM. IT CAN BE USED IN TEMPERATURE

RANGE OF 32 °F - 1112 °F.,SILICON DIOXIDE,BAG,APPEARANCE: SOLID ODORLESS.

SG: 2.2.

1000888053

117Chemicals

(Drilling Fluids)THERMASET CI-40

ADDITIVE DRILLING FLUID; LIQUID FORM,TERT-BUTYL PERBENZOATE,FOR CURING

AGENT (ACCELERATOR) FOR THERMASET LCM SYSTEM FOR HIGH TEMPERATURE

APPLICATIONS (205 °F - 266 °F),TERTIARY-BUTYL

PEROXYBENZOATE,CAN,APPEARANCE: LIQUID. DENSITY: 1.

1000888054





9COM/9CAT

118Chemicals

(Drilling Fluids)THERMASET CI-65

ADDITIVE DRILLING FLUID; LIQUID DISPERSION FORM,DIBENZOYL PEROXIDE,FOR

CURING AGENT (ACCELERATOR) FOR THERMASET LCM SYSTEM FOR LOW

TEMPERATURE APPLICATIONS (32 °F – 205 °F),DIBENZOYL PEROXIDE/ C 9-11

BRANCHED ALKYLBENZOATE,CAN,APPEARANCE: LIQUID. COLOR: WHI.

1000888055

119Chemicals

(Drilling Fluids)THERMASET CLEANER

ADDITIVE DRILLING FLUID; LIQUID FORM,DIMETHYL SUCCINATE, DIMETHYL

GLUTARATE, DIMETHYL ADIPATE,FOR IT IS A CLEANING AGENT USED IN

THERMASET SYSTEM APPLICATIONS TO CLEAN OILY AREAS IN TANKS, PIPES,

ETC.,DIMETHYL SUCCINATE, DIMETHYL GLUTARATE, DIMETHYL

ADIPATE,IBC,APPEARANCE: LIQUID. COLOR: LIG.

1000888056

120Chemicals

(Drilling Fluids)DI-TROL

ADDITIVE DRILLING FLUID; SOLID FORM,SPECIAL BRANCHED CHAIN MODIFIED

STARCH DERIVATIVE,FOR PROVIDES BOTH VISCOSITY AND FLUID LOSS CONTROL

IN DIVALENT DRILLING FLUID SYSTEM MIXED IN CALCIUM CHLORIDE OR CALCIUM

BROMIDE BRINES IN MI-SWACO DI-PRO SYSTEM.,HIGH MOLECULAR WEIGHT,

BRANCHED-CHAIN STARCH DERIVATIVE,A 25 KG MULTI-WALLED SACK,TYPICAL

PHYSICAL AND CHEMICAL,ORDER UNIT OF MEASURE AND UNIT OF ISSUE SHOULD

BE IN SACKS (1 SACK = 25 KGS). CONTAINER MUST BE PROPERLY LABELED WITH

VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND

BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND

TESTING AS NEEDED. NOTE: DI-TROL IS NOT COMPATIBLE FOR USE IN MONO-

VALENT BRINES.#IT WORKS SYNERGISTICALLY WITH OTHER COMPONENTS OF DI-

PRO SYSTEM MAINLY DI-BALANCE (MM: 1000892842) AND DI-BOOST (MM:

1000892844). IT WORKS SYNERGISTICALLY WITH DI-BALANCE TO ENHANCE THE

LSRV.

1000892845

121Chemicals

(Drilling Fluids)DI-BALANCE

ADDITIVE DRILLING FLUID; SOLID FORM,FINE PARTICLE-SIZE MAGNESIUM

COMPOUND,FOR CONTROLS THE PH OF BRINE-BASED AQUEOUS DRILLING FLUID

SYSTEMS MIXED IN ZINC BROMIDE, CALCIUM CHLORIDE OR CALCIUM BROMIDE

IN MI-SWACO'S DI-PRO MUD SYSTEM.,MINIMUM PERCENTAGE AS MGO: 98,A 25

KG MULTI-WALLED SACK,PHYSICAL PROPERTIES: APPEARANC,ORDER UNIT OF

MEASURE AND UNIT OF ISSUE SHOULD BE IN SACKS (1 SACK = 25 KGS).

1000892842





9COM/9CAT

122Chemicals

(Drilling Fluids)DI-BOOST

ADDITIVE DRILLING FLUID; LIQUID FORM,DIETHYLENE GLYCOL,FOR A VISCOSITY

ENHANCER AND STABILIZER IN DI-VALENT DRLG FLUID SYSTEMS MIXED IN

CALCIUM CHLORIDE OR CALCIUM BROMIDE BRINES IN MI-SWACO DI-PRO

SYSTEM. IT REDUCES DI-PRO SYSTEM VISCOSITY IF CONCENTRATION EXCEEDS 1.0

% BY VOLUME.,DIETHYLENE GLYCOL: 100% PURITY,7.6 LITERS CAN,PHYSICAL AND

CHEMICAL PROPERTI,ORDER UNIT OF MEASURE AND UNIT OF ISSUE SHOULD BE

IN CANS (1 CAN = 7.6 LITERS). CONTAINER MUST BE PROPERLY LABELED WITH

VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND

BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND

TESTING AS NEEDED. NOTE: DI-BOOST WORKS SYNERGISTICALLY WITH OTHER

COMPONENTS OF DI-PRO SYSTEM MAINLY DI-BALANCE (MM: 1000892842) AND

DI-TROL (MM: 1000892845).

1000892844

123Chemicals

(Drilling Fluids)

LE SPERMUL - OBM emulsion

control

ADDITIVE DRILLING FLUID; LIQUID FORM,EMULSIFIER FOR INVERT EMULSION

MUD,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. A

LIQUID PRIMARY EMULSIFIER AND OIL-WETTING AGENT FOR USE IN MINERAL OIL-

OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT,

INTEGRADE OR ENCORE DRILLING FROM HALLIBURTON BAROID.,A PROPRIETARY

EMULSIFIER MIXTURE,DRUM,APPEARANCE: CLEAR AMBER VISCOU,REQUIRED

QTY: 55 GAL PER DRUM.

1000904194

124Chemicals

(Drilling Fluids)FACTANT - OBM emulsifer

ADDITIVE DRILLING FLUID; LIQUID FORM,EMULSIFIER AND WETTING AGENT FOR

INVERT EMULSION MUD,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE

OBM SYSTEM. A LIQUID EMULSIFIER AND OIL-WETTING AGENT FOR USE IN

MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS

OF INNOVERT, INTEGRADE OR ENCORE DRILLING FROM HALLIBURTON BAROID.,A

PROPRIETARY EMULSIFIER MIXTURE,DRUM,APPEARANCE: DARK VISCOUS

LIQUI,REQUIRED QTY: 55 GAL PER DRUM.

1000904195

125Chemicals

(Drilling Fluids)BHD-513 - OBM filtrate control

ADDITIVE DRILLING FLUID; SOLID FORM,CROSS-LINKED POLYMER SOLID,FOR THIS

IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. A CROSS-LINKED

POLYMER SOLID THAT PROVIDES FILTRATION CONTROL FOR USE IN MINERAL OIL-

OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT,

INTEGRADE OR ENCORE OF HALLIBURTON BARO,A CROSS-LINK POLYMER

SOLID,BAG,APPEARANCE: SOLID. SPECIFIC GR,REQUIRED QTY: 25 KG PER BAG.

1000904196





9COM/9CAT

126Chemicals

(Drilling Fluids)BDF-489 - OBM viscofifier

ADDITIVE DRILLING FLUID; SOLID FORM,ORGANIC BASED VISCOSIFER,FOR THIS IS

PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. AN ORGANIC BASED

RHEOLOGY MODIFIER FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-

BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF

HALLIBURTON BAROID.,ORGANIC BASED VISCOSIFIER,25 KG BAG,APPEARANCE:

SOLID WHITE. MELTING POINT: 55,REQUIRED QTY: 25 KG PER BAG.

1000904197

127Chemicals

(Drilling Fluids)ADAPTA - OBM filtrate control

ADDITIVE DRILLING FLUID; SOLID FORM,METHYLSTYRENE ACRYLATE

COPOLYMER,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM.

PRIMARY FILTRATION CONTROL AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL

OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE

OR ENCORE OF HALLIBURTON BAROID.,METHYLSTYRENE ACRYLATE

COPOLYMER,25 KG BAG,APPEARANCE: SOLID WHITE. SPECIFIC GRAVITY

:,REQUIRED QTY: 25 KG PER BAG.

1000904198

128Chemicals

(Drilling Fluids)RHEOMOD-L- OBM viscosifer

ADDITIVE DRILLING FLUID; LIQUID FORM,MODIFIED TRIMER FATTY ACID,FOR THIS

IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. LIQUID POLYMERIC

VISCOSIFIER AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-

BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF

HALLIBURTON BAROID.,MODIFIED TRIMER FATTY ACID,55 GAL

DRUM,APPEARANCE: LIQUID DARK. SPECIFIC GRAVITY : 0,REQUIRED QTY: 55 GAL

PER DRUM.

1000904199

129Chemicals

(Drilling Fluids)TAU-MUD - OBM viscofifier

ADDITIVE DRILLING FLUID; POWDER FORM,CYRISTALLINE SILICA AND

SEPIOLITE,FOR A HIGH TEMPERATURE VISCOSIFER, ONE OF THE COMPONENT OF

CLAY FREE OIL-BASED DRILLING FLUID SYSTEMS OF HALLIBURTON # BAROID

INNOVERT (LOW TOXICITY MINERAL OIL BASE) AND INTEGRADE (DIESEL BASE).

1000908546

130Chemicals

(Drilling Fluids)

RHEOLOGY MODIFIER -

OMNIPLEX

ADDITIVE DRILLING FLUID; LIQUID FORM,ANIONIC SYNTHETIC POLYMER IN

EMULSION FORM,FOR A LIQUID POLYMERIC PREMIER VISCOSIFIER WHICH HELPS

TO IMPROVE THE RHEOLOGICAL AND SUSPENSION CHARACTERISTIC OF LOW

TOXICITY MINERAL OIL- AND SYNTHETIC OIL-BASED DRILLING FLUIDS OR IN

DIESEL OIL-BASED MUD. IT HELPS INCREASE PRIMARILY LOW SHEAR

RHEOLOGICAL,ANIONIC SYNTHETIC POLYMER IN EMULSION

FORM,DRUM,PHYSICAL PROPERTIES: APPEAR BOILING POINT: ~ 100 OC

MELT/FREEZE POINT: -12 OC PH VALUE CONC. SOLN: 2 # 5 FLASH

PO,PARAMETERS VALUE #FANN-35 F1 SPRING 6 RPM READING @ 120 OF EQUAL

OR GREATER THAN 9 #FANN-35 F1 SPRING 3 RPM READING @ 120 OF EQUAL OR

GREATER THAN 8#LOW SHEAR YIELD POINT LSYP @120 OF EQUAL OR GREATER

THAN 7#.

1000904472





9COM/9CAT

131Chemicals

(Drilling Fluids)OIL SOLUBLE H2S SCAVENGER

ADDITIVE DRILLING FLUID; LIQUID FORM,HYDROCARBON,FOR OIL SOLUBLE

HYDROGEN SULFIDE SEQUESTERING AGENT/SCAVENGER AQUEOUS SOLUTION

MIXTURE OF INORGANIC COMPOUNDS, FOR THE REMOVAL OF H2S IN VARIOUS

APPLICATIONS AND NOT LIMITED TO ZERO FLARING/FLOWBACK, CRUDE OIL

ROAD TRANSPORTATION, DRILLING MUD, REFINING AND P,PROPRIETARY BLEND

OF ZINC COMPOUNDS IN HYDROCARBON BASE,DRUM,APPEARANCE/ODOR:

VISCOUS YELLOW TO YELLOW-GREEN LIQUID /MILD ODOR. BOILING POINT: 180

DEG CELSIUS. VAPOR PRESSURE: 0.50 MMHG. SOLUBILITY IN WATER: INSOLUBLE.

SPECIFIC GRAVITY: 0.9 (WATER = 1.0). MOLECULAR WEIGHT: PROPRIETARY. PH: 6-

7. FLASH POINT (METHOD): >200F. FOR THE REMOVAL OF H2S IN VARIOUS

APPLICATIONS AND NOT LIMITED TO ZERO FLARING/FLOWBACK, CRUDE OIL

ROAD TRANSPORTATION, DRILLING MUD, REFINING AND PETROCHEMICAL

PLANTS, CRUDE OIL SHIPMENTS AND DISPOSAL WELLS.

1000843350

132Chemicals

(Drilling Fluids)

HTHP FLUID LOSS SYNTHETIC

POLYMER

ADDITIVE DRILLING FLUID; WHITE POWDER FORM,SYNTHETIC POLYMER,FOR

CONTROLS HTHP FLUID LOSS IN FRESH, SALTY, OR HARD BRINE FLUIDS. IT

INHIBITS SHALE AND STABILIZING FLUID RHEOLOGY. IT CONTROLS WATER LOSS

IN ALL ENVIRONMENTS AND REDUCES DIFFERENTIAL STICKING TENDENCIES.,25

LB MULITIWALL PAPER BAG,APPEARANCE : WHITE COLOURED PO.

1000847072

133Chemicals

(Drilling Fluids)SEALING PARTICLES LCM

ADDITIVE DRILLING FLUID; POWDER FORM,SPECIAL BLEND OF GRADED SEALING

PARTICLES.,FOR DESIGNED TO BE EFFECTIVE IN CURING SEVERE TO TOTAL LOSS

CIRCULATION IN HIGHLY FRACTURED/VUGULAR OR POROUS CARBONATE

FORMATIONS, WITHOUT THE ADDITION OF OTHER CONVENTIONAL LCMS IT CAN

BE USED IN ALL TYPES OF DRILLING FLUIDS AND IT IS NOT

RECOMMENDED,SPECIAL BLEND OF GRADED SEALING

PARTICLES.,BAG,APPEARANCE: LIGHT TAN/BROWN SPECIFIC GRAVITY: 0.9

SOLUBILITY IN WATER: INSOLU PH: 6.5-7.5.

1000866812

134Chemicals

(Drilling Fluids)

HIGH SOLIDS HIGH FLUID LOSS

LCM

ADDITIVE DRILLING FLUID; POWDER FORM,MIXTURE,FOR HIGH FLUID LOSS LCM

FORMS A RAPID SOLID PLUG AGAINST LOSS ZONE WHEN LIQUID PHASE IS

SQUEEZE FROM SLURRY IN ORDER TO CURE PARTIAL TO SEVERE LOSSES OF

WATER/OIL BASED MUDS.,MIXTURE,BAG,APPEARANCE: OFF-WHITE TO GA BULK

DENSITY: 41-46 LB/CU PH: 11.5-12.8.

1000881942





9COM/9CAT

135Chemicals

(Drilling Fluids)SWELLING SEALING LCM

ADDITIVE DRILLING FLUID; POWDER FORM,MIXTURE OF POLYSACCHARIDES,FOR

SWELLING/SEALING AGENT USED TO FILL FRACTURES AND VOIDS BY CREATING A

SOLID INNER MATRIX SEAL IN ORDER TO CURE PARTIAL TO SEVERE LOSSES OF

WATER/OIL BASED MUDS. USUALLY PUMPED AHEAD OF EZ-SQUEEZE OR CEMENT

JOB AND IT HAS A GOOD SOLUBILITY IN ACID,MIXTURE OF

POLYSACCHARIDES,PAIL,APPEARANCE: LIGHT TAN TO OF BULK DENSITY: 35-55

BA/CU.

1000881943

136Chemicals

(Drilling Fluids)DRILZONE - ROP enhancer

ADDITIVE DRILLING FLUID; LIQUID FORM,IVE ND OF SURFACE,FOR SPECIAL BLEND

OF SURFACE AGENTS ROP ENHANCER ,USED IVE IN THE WATER BASE MUD FOR

REDUCING TORQUE AND ,DRAG AND PREVENTING BIT BALLING. NORMAL

TREATMENT:1-2% VOL/VOL. KLA-SHIELD SYSTEM CONSISTS OF DRILZONE IDCAP

D, KLA-STOP AND POROSEAL.,IVE ND OF SURFACE,55 GAL/ DRUM,APPEARANCE:

YELLOW TO BROWN 0.78- FLASH POINT: > 201°F UID SPECIFIC GRAVITY.

1000875822

137Chemicals

(Drilling Fluids)KLA-STOP

ADDITIVE DRILLING FLUID; LIQUID FORM,POLYAMINE DERIVATIVE,FOR USED FOR

SUPPRESSING CLAY SWELLING. IT EFFECTIVELY , INHIBITS SHALE OR GUMBO

CLAYS FROM HYDRATING , AND MINIMIZES THE POTENTIAL FOR BIT BALLING.

NORMAL TREATMENT: 1-4% VOL/VOL. KLA-SHIELD SYSTEM CONSISTS OF

DRILZONE , IDCAP D, KLA-STOP AND POROSEAL,POLYAMINE DERIVATIVE,DRUM

55 GAL/ DRUM,PH (5% SOLUTION): 9.2-10. FLASH POINT: > 200°F

EARANCE:COLORLESS LIQUID CIFIC GRAVITY: 1.03-1.0.

1000875823

138Chemicals

(Drilling Fluids)IDCAP D

ADDITIVE DRILLING FLUID; POWDER FORM,DRY ACRYLIC ACID COPOLYMER,FOR

ENCAPSULATION COPOLYMER USED TO PROVIDE CUTTINGS , ENCAPSULATION

AND CLAY DISPERSION INHIBITION WITH MINIMAL VISCOSITY CONTRIBUTION

FOR WATER BASE FLUIDS AND SALINE WATER ENVIRONMENTS. NORMAL

TREATMENT: 2-4 LB/BBL. KLA-SHIELD SYSTEM CONSISTS OF DRILZONE,DRY

ACRYLIC ACID COPOLYMER,BAG 25 KG/SACK,APPEARANCE: WHITE POWDER

SPECIFIC GRAVITY: 0.8 PH (1% SOLUTION): 6.

1000875824





9COM/9CAT

139Chemicals

(Drilling Fluids)POROSEAL

ADDITIVE DRILLING FLUID; LIQUID FORM,STARCH COPOLYMER,FOR PROVIDES

PERMEABILITY PLUGGING TO EFFECTIVELY SEAL SHALES AND FILTER CAKES,

IMPROVING THE PERFORMANCE OF HIGHLY INHIBITIVE WATER-BASE DRILLING

FLUIDS. IT ADDITIVE IS ALSO USED TO PROVIDE SUPPLEMENTAL FLUID LOSS

CONTROL IN HIGH-TEMPERATURE APPLICATIONS NORMAL POROSEAL -SHIELD

SYSTEM CONSISTS DRILZONE IDCAP D, KLA-STOP ATMENT:2-5%

VOL/VOL.,STARCH COPOLYMER,55 GAL/DRUM,APPEARANCE: WHITE LIQUID

SPECIFIC GRAVITY: 1.0-1.1 PH (CONC. SOLUTION): 10.

1000875825

140Chemicals

(Drilling Fluids)FIBER FINE

ADMIXTURE DRILLING MUD; SOLID FORM,ORGANIC CELLULOSE FIBER, LIGHT TAN

/ BROWN,FOR USED FOR SEALING THIEF ZONES, HIGHLY FRACTURED/VUGULAR

FORMATIONS AND MINIZING THE RISK OF DIFFERENTIAL STICKING,A FINELY SIZED

(MICRONIZED) ORGANIC CELLULOSE FIBER,25LB.BAG,ODORLESS, SG: 0.9, MIX OF

FINELY DIVIDED CELLULOSE FIBERS, INSOLUBLE IN WATER, NON TOXIC, PH: 6.5-

7.5,SIEVE SPECIFICATION FOR FRAC-SEAL FINE: RETAIN ON 40 MESH SIEVE: 0%,

RETAIN ON 60 MESH SIEVE: 0.10%, RETAIN ON 80 MESH SIEVE: 0.20%, RETAIN ON

100 MESH SIEVE: 2.83%, RETAIN ON 140 MESH SIEVE:11.2%, RETAIN ON 170

MESH SIEVE:28.5%, RETAIN ON 270 MESH SIEVE:38.23%:NORMAL TREATMENT: 8-

10 LB/BBL OF FRACSEAL-FINE , THE CONSTRUCTION OF THE MULTI-WALLED

PAPER BAG (CONTAINER)SHALL BE FOLLOWS: 1ST PLY 75 LB.NATURAL KRAFT

PAPER(INTETIOR PLY) 2ND PLY 75 LB.NATURAL KRAFT PAPER 3RD PLY 80

LB.NATURAL KRAFT PAPER (EXTERIOR PLY). THE BAG DOES NOT HAVE AN INNER

POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY

SEALED OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL

AND/OR ADVERSELY AFFECT FLUID PROPERTIES.

1000792802





9COM/9CAT

141Chemicals

(Drilling Fluids)FIBER MEDIUM






7.5,SIEVE SPECIFICATION FOR FRAC-SEAL MEDIUM: RETAIN ON 40 MESH

SIEVE:1.8%, RETAIN ON 60 MESH SIEVE: 0.30%,RETAIN ON 80 MESH SIEVE:1.7%,

RETAIN ON 100 MESH SIEVE: 4.33%, RETAIN ON 140MESH SIEVE:5.40%, RETAIN

ON 170 MESH SIEVE: 15.97%,RETAIN ON 270 MESH SIEVE:31.17%:NORMAL

TREATMENT: 8-10 LB/BBL OF FRACSEAL-MEDIUM , THE CONSTRUCTION OF THE

MULTI-WALLED PAPER BAG (CONTAINER)SHALL BE FOLLOWS: 1ST PLY 75

LB.NATURAL KRAFT PAPER(INTETIOR PLY) 2ND PLY 75 LB.NATURAL KRAFT PAPER

3RD PLY 80 LB.NATURAL KRAFT PAPER (EXTERIOR PLY). THE BAG DOES NOT HAVE

AN INNER POLYETHYLENE LINER.

1000792803

142Chemicals

(Drilling Fluids)FIBER COARSE, 25 LB






7.5,SIEVE SPECIFICATION FOR FRAC-SEAL COARSE: RETAIN ON 40 MESH SIEVE:

4.93%, RETAIN ON 60 MESH SIEVE: 2.17%, RETAIN ON 80 MESH SIEVE: 3.73%,

RETAIN ON 100 MESH SIEVE: 6.17%, RETAIN ON 140 MESH SIEVE:6.87%, RETAIN

ON 170 MESH SIEVE:17.63%, RETAIN ON 270 MESH SIEVE:30.47%:NORMAL

TREATMENT: 8-10 LB/BBL OF FRACSEAL-COARSE, THE CONSTRUCTION OF THE

MULTI-WALLED PAPER BAG (CONTAINER)SHALL BE FOLLOWS,1ST PLY 75

LB.NATURAL KRAFT PAPER(INTETIOR PLY)2ND PLY 75 LB.NATURAL KRAFT PAPER

3RD PLY 80 LB.NATURAL KRAFT PAPER (EXTERIOR PLY).THE BAG DOES NOT HAVE

AN INNER POLYETHYLENE LINER.THE BAG MUST BE VALVE/SPOUT TYPE

COMPLETELY SEALED OTHER ASSOCIATED LEMENTS MUST NOT BE HARMFUL TO

PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.

1000792804





9COM/9CAT

143Chemicals

(Drilling Fluids)BARABRINE Defoam

ADDITIVE DRILLING FLUID; LIQUID FORM,BLEND OF NONIONIC

SURFACTANTS,FOR NON-DAMAGING FLUIDS RDF-615 AND NON-RESERVOIR

WBM AND BRINES, INCLUDING ZNBR2,BLEND OF NONIONIC SURFACTANTS,PAIL

(ONE PAIL = 5 GALLONS),APPEARANCE: COLORLESS CLEAR LI,ADDITIVE FOR FLUID

FORMULATION FOR SYSTEM RDF-615. THIS DEFOAMER IS USED AS PART OF THE

NON-DAMAGING FLUIDS RDF-615, WHICH INCLUDES BARAZAN D PLUS, BARA

CARB 150, OXYGON, BARABUF (MM: 1000184370), N DRILL HT PLUS (MM:

1000788390), BARACARB 5 (MM: 1000775558), BARACARB 25 (MM:

1000775559), BARACARB 50 (MM:1000775560) AND BAROLUBEGOLD SEAL (MM:

1000757580). TYPICAL TREATMENT IS 0.05-0.25 LB/BBL (0.007-0.033 GAL/BBL).

THIS DEFOAMER CAN ALSO BE USED IN NON-RESERVOIR WATER BASED MUDS

AND BRINES, INCLUDING ZNBR2. SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB

CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000908534

144Chemicals

(Drilling Fluids)PUREFIED XANTHAN GUM

ADDITIVE DRILLING FLUID; POWDER FORM,VISCOSIFIER / SUSPENSION AGENT

(POLYSACCHARIDE),FOR FRESH WATER, SEA WATER AND BRINE,DISPERSANT-

ADDED BIOPOLYMER (XANTHAN GUM),BAG (ONE BAG =55 LBS),APPEARANCE:

YELLOW TO WHITE PO,ADDITIVE FOR FLUIDFORMULATION FOR SYSTEM RDF-615.

IT IS A BIOPOLYMER XANTHAN GUM USED TO HELP TO DISPERSE EASILY, AND TO

PROVIDE VISCOSITY AND SUSPENSION IN FRESH WATER, SEA WATER AND IN

BRINES, AS SODIUM AND POTASSIUM BROMIDES AND SODIUM AND POTASSIUM

CHLORIDES. IT IS STABLE AT 250 DEG F (121 DEG C). TYPICAL TREATMENT OF 0.1-

2 LB/BBL (0.3-5.7 KG/ CUBIC M) AS NEEDED TO OBTAIN THE DESIRED VISCOSITY.

THE UNIT IS 55 LBS (25 KG)/BAG. IT IS PART OF A NON-DAMAGING SYSTEM RDF-

615, WHICH CONTAINS BARABRINE DEFOAM, BARA CARB 150, OXYGON,

BARABUF (MM: 1000184370), N DRILL HT PLUS (MM: 1000788390), BARACARB 5

(MM: 1000775558), BARACARB 25 (MM:1000775559), BARACARB 50 (MM:

1000775560) AND BAROLUBE GOLD SEAL (MM: 1000757580).

1000908458





9COM/9CAT

145Chemicals

(Drilling Fluids)

Ground Marble CaCO3, 50-150,

55 LB

ADDITIVE DRILLING FLUID; POWDER OR GRANULES FORM,SIZED CALCIUM

CARBONATE (CACO3) MARBLE QUALITY,FOR WATER BASED MUD (WBM), OIL

BASED MUD (OBM) AND BRINE,CALCIUM CARBONATE (CACO3) MARBLE

QUALITY.,BAG (ONE BAG = 55 LBS),APPEARANCE: WHITE POWDER OR

GR,ADDITIVE FOR FLUID FORMULATION FOR SYSTEM RDF-615. SIZED MARBLE

CALCIUM CARBONATE (D50 = 150 MICRONS) USED TO INCREASE DENSITY IN

WBM AND OBM FOR RESERVOIR APPLICATIONS AND BRINES AND AS A BRIDGING

AGENT FOR FLUID LOSS CONTROL AND SEALING/LCM IN NON - DAMAGING

SYSTEMS. THE UNIT IS 55 LBS (25 KG) / BAG. IT IS PART OF THE RDF -615 WHICH

CONTAINS BARABRINE DEFOAM, BARAZAN D PLUS, OXYGON, BARABUF (MM:

1000184370), N DRILL HT PLUS (MM:1000788390), BARACARB5 (MM:

1000775558), BARACARB 25 (MM:1000775559), BARACARB 50 (MM:

1000775560) AND BAROLUBE GOLD SEAL (MM: 1000757580).

1000908535

146Chemicals

(Drilling Fluids)Oxygon

ADDITIVE DRILLING FLUID; POWDER FORM,ORGANIC ACID SALT (OXYGEN

SCAVENGER),FOR FRESH WATER, WATER BASED MUD (WBM) AND MONO OR

DIVALENT BRINES,GRANULAR ERYTHORBATE MATERIAL,PAIL (ONE PAIL =55

LBS),APPEARANCE: WHITE GRANULAR POW,ADDITIVE FOR FLUID FORMULATION

FOR SYSTEM RDF-615. IT IS USED AS A CORROSION INHIBITOR OR OXYGEN

SCAVENGER IN WBM, WATER AND IN MONO OR DIVALENT BRINES/COMPLETION

FLUIDS. THE UNIT IS 55 LBS (25KG)/PAIL. IT IS PART OF THE NON-DAMAGING

SYSTEM - RDF -615 SYSTEM WHICH CONTAINS BARABRINE DEFOAM, BARAZAN D

PLUS, BARA CARB 150, BARABUF (MM: 1000184370), N DRILL HT PLUS

(MM:1000788390), BARACARB 5 (MM: 1000775558), BARACARB 25

(MM:1000775559), BARACARB 50 (MM: 1000775560) AND BAROLUBE GOLD SEAL

(MM: 1000757580). TYPICAL TREATMENT OF 0.1 LB/BBL. BASE THE TREATMENT

OF CIRCULATING FLUIDS ON OXYGEN CONTENT.

1000908459

147Chemicals

(Drilling Fluids)MAGNESIUM OXIDE

CHEMICAL; GR TECHNICAL,M20,POWDER FORM,22.7 KG (50 LB) - 25.0 KG (55 LB)

SACK,96% MG0 MIN,MAGNESIUM OXIDE,SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL THE PRODUCT

SHOULD BE PACKED IN 3 OR 4 PLY PAPER SACKS

1000184370





9COM/9CAT

148Chemicals

(Drilling Fluids)

LUBRICANT - RADIAGREEN EME

SALT

ADDITIVE DRILLING FLUID; SPECIAL BLEND,FOR 5 MAX C DEG (320 F) MAX AND

PH USED TO REDUCE TORQUE AND DRAG IN VERY CHALLENGING DRILLING AND

COMPLETION OPERATIONS E.G. SPECIAL COILED TUBING UNDER BALANCED

DRILLING. THE PRODUCT SHOULD BE COMPATIBLE FOR APPLICATION IN

SEAWATER AND SALT BRINE-BASED DRILLING FLUIDS AND BRINES. IENT

CONDITIONS TOM HOLE LIMITATIONS: NHOLE CONDITIONS OR ING

APPLICATIONS UNDER ASING IN DRUM OR CHEESING E PHASE SEPARATION

PROBLEMS ALKALINE DRILLING FLUIDS PRODUCT SHOULD BE EASY PRODUCT

SHOULD NOT FORM HANDLE, EASY TO FLOW AT,SPECIAL

BLEND,DRUM,APPEARANCE: AMBER LIQUID SPECIFIC GRAVITY: 0.98-1.1

SOLUBILITY IN WATER: INSOLU FLASH POINT (METHOD): 185 POUR POINT: 32 C

DEG MAX.

1000857139

149Chemicals

(Drilling Fluids)

POLYANIONIC CELLULOSE LO-VIS

(PAC-LV)

ADMIXTURE DRILLING MUD; AA SOLID, GRANULAR, WHITE TO FORM,MIL-PAC LV,

POLYANIONIC ODORLESS, POLYANIONIC,FOR AA USED FOR FILTRATION

CONTROL,AA POLYANIONIC CELLULOSE,50 LB OR 25 KG / SACK,AA APPEARANCE:

SOLID, CREAM,OTHER ASSOCIATED ELEMENTS BULID-UP. CONTAINER IS A MULTI-

WALLED SACK, 1ST PLY - 70 G/SQM NATURAL KRAFT PAPER (INTERIOR PLY). 2ND

PLY - 70 G/SQM NATURAL KRAFT PAPER. 3RD PLY - SEPARATE INNER BAG LINER,

HIGH DENSITY ORIENTED AND CROSS LAMINATED INNER LINER (TUBULAR SHAPE)

MADE UP OF POLYETHYLENE RESIN MATERIAL WITH A WEIGHT RANGE OF 15-24

G/SQM. 4TH PLY - 70 G/SQM NATURAL KRAFT PAPER. 5TH PLY - SEPARATE INNER

BAG LINER, HIGH LAMINATED INNER LINER (TUBULAR SHAPE)MADE UP OF

POLYETHYLENE RESIN MATERIAL MATERIAL WITH A WEIGHT RANGE OF 15-24

G/SQM. 6TH PLY - 70 G/SQM NATURAL KRAFT PAPER (EXTERIOR PLY). THE BAG

MUST BE PROPERLY CONTAINER BE VALVE / SPOUT TYPE COMPLETELY SEALED

AND MOISTURE PROOF.

1000758662





9COM/9CAT

150Chemicals

(Drilling Fluids)


2200 lb/BAG

ADDITIVE: CEMENT; 2200 LB BAG; NON-BREATHABLE FABRIC; DISPOSABLE BAG;

WITH LIFTING STRAPS; NO ADMIXTURE CEMENT; FOR USED FOR BUILDING OIL

WELL COMPLETION FLUIDS,TYPE 1,94-98% CALCIUM CHLORIDE (CACL2) POWDER,

FLAKES OR PELLETS,2200 LB BAG,ASTM D98,PURITY AS FOLLOW: A. CALCIUM

CHLORIDE (CACL2): 98% WT. B. MAGNESIUM AS MGCL2: 0.2 - 0.4 % WT. C. ALKALI

CHLORIDES AS NACL: 1.4 - 5.0 % WT. D. HEAVY METALS AS PB: 0.005 % WT

MAXIMUM. E. SULFATE AS CASO4: 0.05 % WT MAXIMUM. F. WATER INSOLUBLES:

0.20 % WT MAXIMUM. G. OTHER WATER SOLUBLE IMPURITIES: 0.35 % WT

MAXIMUM. H. PH: 10 % (V/V) SOLUTION (5.89 G IN 97.3 CC DEIONIZED WATER):

7.5 TO 9.5. REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM # 1000644273.

LIFTING STRAP BAG IS DISPOSABLE, TOP CLOSURE WATERTIGHT, STACKABLE &

WITHOUT BOTTOM SPOUT, MINIMUM TENSILE STRENGTH FACTOR 5, FLEXURAL

STRENGTH FOR NORMAL HANDLING & OUTSIDE STORAGE NON-BREATHABLE

FABRIC, STACKABLE WITHOUT USE OF PALLET, BAG TOP CLOSURE TO BE WATER

TIGHT & CAPABLE OF WITHSTANDING THE SAME HANDLING & STORAGE

REQUIREMENTS AS THE BAG ITSELF REQUIRES SAUDI ARAMCO HAZCOM LABEL IN

MM 1000644274.

1000022538

151Chemicals

(Drilling Fluids)RHEOLOGY MODIFIER

ADMIXTURE DRILLING MUD; DARK LIQUID FORM,COMPLEX BLEND OF DIMER

AND TRIMER POLYMERIC FATTY ACIDS,FOR USED TO INCREASE LOW-SHEAR

RHEOLOGY, WHILE HAVING ONLY A SLIGHT EFFECT ON YIELD POINT,COMPLEX

BLEND OF DIMER AND TRIMER POLYMERIC FATTY ACIDS,55

GAL.DRUM,APPEARANCE: DARK LIQUID, SPGR: 0.95 GM/CC, FLASH POINT 475

DEG F (246 C), ODOR: FATTY ACID, FREEZING POINT: NOT DETERMINED, BOILIING

POINT: 300 C, SOLUBILITY: INSOLUBLE IN WATER, DENSITY@20DEG C IS 0.95,

OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR

ADVERSELY AFFECT FLUID PROPERTIES.

1000789179

152Chemicals

(Drilling Fluids)H2S SCAVENGER, LIQUID

ADDITIVE DRILLING FLUID; LIQUID FORM,NITROGEN,FOR ADMIXTURE

HYDROGEN SULFIDE SCAVENGER FOR USE IN WATER-BASE MUD AND INVERT

EMULSION OIL-BASE MUD. NITROGEN-BASED ORGANIC LIQUID COMPOUND.

READILY AVAILABLE FOR APPLICATION AND CAN BE USED IN COLD AND WARM

TEMPERATURES.,A NITROGEN-BASED, NON-ZINC

COMPOUND,DRUM,APPEARANCE: AMBER LIQUID. S PH: 9 - 11.5 SOLUBILITY IN

WATER: SOLUBL FLASH POINT (METHOD): >212F POUR POINT: < - 4 F.

1000845182





9COM/9CAT

153Chemicals

(Drilling Fluids)

SODIUM BROMIDE (NaBr) SOL

12.35 LB/GAL

ADDITIVE DRILLING FLUID; LIQUID COLORLESS FORM,SODIUM BROMIDE

SOLUTION,FOR USED AS A SINGLE-SALT BRINE WITH MIN DENSITY OF 12.35

LB/GAL @ 60 DEG F. IT IS THERMALLY AND CHEMICALLY STABLE AND GENERALLY

USED TO PREPARE DENSE CLEAR FLUIDS FOR USE IN DRILLING, COMPLETION OR

WORK-OVER OF OIL OR GAS WELLS.,SODIUM BROMIDE,IBC,COLORLESS LIQUID.

ASSAY: MIN 4.

1000847075

154Chemicals

(Drilling Fluids )

Marble Madium CaCO3, 135-165,

2200 LB

ADMIXTURE: DRILLING MUD; GROUND MARBLE: MEDIUM GRADE; 135-165

MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD;

DRY, FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)

METAMORPHOSED,FOR USED AS BRIDGING AGENT IN BRINE-BASED OIL-BASED

AND SALT SATURATED FLUIDS TO CONTROL FLUID LOSSES INTO RESERVOIR

ROCKS,GROUND MARBLE MEDIUM ,135-165 MICRON PURE METAMORPHOSED

CALCIUM CARBONATE CACO3 & CAMG (CO3)2,BREATHLESS 1000 KG OR 2200 LB

BAG,PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND

LOCATION, PRODUCTION DATE, BATCH NO. AND STOCK NO. SIZED

METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS

W/LIMESTONE ARE NOT ACCEPTABLE 135-165 MICRON PARTICLE, 95% SOLUBLE

IN 15% HCL ACID, TYPE "MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE,

WATERPROOF, UV STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT,

MINIMUM TENSILE STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO

SUSTAIN NORMAL HANDLING & OUTDOOR STORAGE FOR THE PRODUCT'S SHELF

LIFE IN SAUDI ARABIAN CLIMATIC CONDITIONS..THE DISPOSABLE SUPER SACKS

SHOULD HAVE AT LEAST 75% OF THEIR SHELF LIFE REMAINING WHEN SHIPPED

OR RECEIVED AT DESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.

1000021819

155Chemicals

(Drilling Fluids)CAUSTIC SODA - NAOH

ADMIXTURE: DRILLING MUD; SODIUM HYDROXIDE (CAUSTIC SODA) ADMIXTURE

DRILLING MUD; DRY, WHITE FREE FLOWING FLAKES, BEADS OR PELLETS, MAIN

COMPONENT: SODIUM HYDROXIDE, NAOH FORM,SODIUM HYDROXIDE

(NAOH),FOR USED FOR PH AND ALKALINITY CONTROL. CAUSTIC SODA MINIMIZE

THE SOLUBILITY OF CALCIUM AND MAGNESIUM IN DRILLING FLUIDS,SODIUM

HYDROXIDE (CAUSTIC SODA),22.7 KG OR 50 LB STEEL DRUM,DRUM WITH

MINIMUM 7 IN TOP OPENING & LOW DENSITY POLYETHYLENE INNER LINER.

1000021749





9COM/9CAT

156Chemicals

(Drilling Fluids )BIOCIDE - GLUTARALDEHYDE

EPOXY PLASTIC CAN, GLUTARALDEHYDE ADMIXTURE DRILLING MUD; AQUEOUS

SOLUTION FORM,GLUTARALDEHYDE,FOR A MICROBIOCIDE USED IN DRILLING

FLUIDS TO CONTROL AEROBIC AND ANAEROBIC BACTERIA INCLUDING SULFATE

REDUCERS,AQUEOUS SOLUTION OF GLUTARALDEHYDE,5 GAL PLASTIC

CAN,CORROSIVE TO COMMON METAL, IDEAL STORAGE TEMPERATURE 80 DEG F,

IN EPOXY PLASTIC CONTAINER CONTAINER PROPERLY LABELED, VENDOR'S NAME

MANUFACTURER'S NAME AND LOCATION PRODUCTION DATE AND BATCH

NO.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB

CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).THE

ORIGINAL MANUFACTURER, (COA) AND CERTIFICATE OF ORIGIN (COO).

1000021556

157Chemicals

(Drilling Fluids )

WATER SOLUBLE CORROSION

INHIBITOR

INHIBITOR: CORROSION; 55-GAL DRUM. INHIBITOR; CORROSION, COAT B-1400

TYPE,55 GAL DRUM,CATIONIC, WATER SOLUBLE, HETEROCYCLIC AMINE,

BLENDED WITH METHANOL MICROBIOSTAT TO CONTROL AEROBIC & ANAEROBIC

BACTERIA GROWTH, USE AS A CORROSION INHIBITOR PACKER FLUID.PRODUCT


ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000022136

158Chemicals

(Drilling Fluids)WALNUT SHELLS


CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; GROUND

FORM,WALNUT SHELLS,FOR LOSS CIRCULATION MATERIAL,25 KG OR 50 LB

BAG,SPECIFIED AS 39.8% ON MESH NO 8, 45.4% ON MESH NO 30, 4.2% THRU

MESH NO 40, 4.2% THRU MESH NO 70, 1.7% THRU MESH NO 100, NOT MORE

THAN 4.7% THRU MESH NO 100 SHIPMENT OF PRODUCT SHALL CONFORM TO




KRAFT PAPER. 3RD PLY 80 LB MIN.

1000021811





9COM/9CAT

159Chemicals

(Drilling Fluids)SODIUM BICARBONATE

ADMIXTURE: DRILLING MUD; 25 KG (50 LB); SODUM BICARBONATE ADMIXTURE

DRILLING MUD; DRY, WHITE FINE CRYSTALLINE POWDER FORM,SODIUM

BICARBONATE (NAHCO3),FOR FOR TREATING CEMENT CONTAMINATION AND TO

PRECIPITATE SOLUBLE CALCIUM IN DRILLING FLUIDS BASE MUD,SODIUM

BICARBONATE,25 KG OR 50 LB BAG,API 13A,PACKED IN KRAFT PLIES & (1)

WATERPROOF POLY LINER PLY SACKS, SHIPMENT OF PRODUCT SHALL CONFORM

TO SAUDI ARAMCO EXPORT PACKING MANUAL MULTI-MOISTURE-PROOF BAGS.

NO PARTICLES GREATER THAN 2MM IN ANY DIMENSION NOTE: THE


FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75

LB MIN. NATURAL KRAFT PAPER. 3RD PLY SEPARATE INNER BAG LINER, HIGH

DENSITY ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE)

MADE OF POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNES

OF 0.1 MM. 4TH PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG

MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE AND WATER

PROOF.

1000021745

160Chemicals

(Drilling Fluids )DEGREASER, 55 GAL

DEGREASER: GENERAL PURPOSE; SLIK NO. 5; 55 GALLON DRUM. CLEANER;

DEGREASER, GENERAL PURPOSE TYPE,LIQUID FORM,FOR RIGS, CUTTING WASH

FOR OIL MUD SYSTEMS & OIL SLICK DISPERSANT,55 GAL DRUM,TYPE "SLIK NO 5",

SOLUBLE IN WATER & ORGANIC SOLVENTS REQUIRES SAUDI ARAMCO HAZCOM

LABEL IN MM# 1000644175..PRODUCT MANUFACTURER AND OR SUPPLIER

REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF

ORIGIN (COO).

1000022131





9COM/9CAT

161Chemicals

(Drilling Fluids )MICA COARSE, 55 LB

ADMIXTURE: DRILLING MUD; 25 KG (50 LB) MULTI-WALL SACK; SHIPMENT OF

PRODUCT SHALL CONFORM TO SAUDI ADMIXTURE DRILLING MUD; COARSE

FORM,MICA,FOR LOST CIRCULATION,25 KG OR 50 LB BAG,17 LB/FT MAXIMUM,

SIEVE SPECIFICATION 2% ON MESH NO 6, 22% ON MESH NO 8, 28% ON MESH NO

12, 20% ON MESH NO 16, 15% ON MESH NO 20, 9% ON MESH NO 40, 4% THRU

MESH NO 40 MULTI-PLY BAG, SHIPMENT OF PRODUCT SHALL CONFORM TO




KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE

BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE

VALVE/SPOUT TYPE COMPLETELY SEALED. THE ORIGINAL MANUFACTURER,


EXPIRATION DATE IF REQUIRED STOCK NUMBER AND COUNTRY OF ORIGIN BE

PRINTED ON THE CONTAINER ITSELF WHETHER IT IS DRUM, BIG BAGS AND/OR

PAPER BAGS.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO

SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000021679

162Chemicals

(Drillning Fluids)MICA FINE, 55 LB

ADMIXTURE: DRILLING MUD; 25 KG (50 LB) MULTI-WALL SACK; SHIPMENT OF

PRODUCT SHALL CONFORM TO SAUDI ADMIXTURE DRILLING MUD; FINE

FORM,MICA,FOR LOST CIRCULATION,25 KG OR 50 LB BAG,17 LB/FT MAXIMUM,

SIEVE SPECIFICATION 2% ON MESH NO 20, 2% ON MESH NO 30, 12% ON MESH

NO 40, 28% ON MESH NO 50, 24% ON MESH NO 70, 16% ON MESH NO 100, 16%

THRU MESH NO 100 MULTI-WALL BAG, SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL NOTE: THE


FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75

LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER

(EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE

BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.

1000021678





9COM/9CAT

163Chemicals

(Drilling Fluids )SODIUM SULFITE

CHEMICAL; GR COMMERCIAL HIGH,SODIUM SULFITE,FOR REMOVE TRACES OF

DISSOLVED OXYGEN,POWDER FORM,60 KG (132 LB) PLASTIC RIMMED FIBER OR

METAL DRUM WITH POLYETHYLENE LINER,95% ANHYDROUS SODIUM SULFITE BY

WT MIN, CATALYZED WITH COBALT -0.03% BY WT MIN,OXYGEN SCAVENGER,26-

SAMSS-027,REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644272..

THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF

PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE

PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS

AND/OR PAPER BAGS.

1000185026

164Chemicals

(Drilling Fluids)CALCIUM HYDROXIDE - LIME

ADMIXTURE: DRILLING MUD; 25 KG/SACK; CALCIUM HYDROXIDE (HYDRATED

LIME) ADMIXTURE DRILLING MUD; DRY, FREE FLOWING FINE POWDER

FORM,CALCIUM HYDROXIDE, CA(OH)2 (TECHNICAL GRADE),FOR TO CONTROL PH,

BICARBONATE, AND H2S CONTAMINATION. LIME IS ALSO A PRIMARY

COMPONENT OF INVERT EMULSION MUDS,CALCIUM HYDROXIDE (HYDRATED

LIME),25 KG OR 50 LB BAG,SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI

ARAMCO EXPORT PACKING MANUAL MULTI-WALLED PAPER BAGS, CONTAINER

PROPERLY LABELED, W/VENDOR'S NAME, MANUFACTURER'S NAME AND

LOCATION, PRODUCTION DATE AND BATCH NO. NOTE: THE CONSTRUCTION OF

THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75

LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL


BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER

1000021558

165Chemicals

(Drilling Fluids)

ACRYLIC COPOLYMER BASE,

SWEEPING AGENT

ADDITIVE DRILLING FLUID; SOLID FORM,ACRYLIC COPOLYMER BASE,FOR TO

PROVIDE VISCOSITY, REDUCE FRICTION, ENCAPSULATE CUTTINGS AND PROVIDE A

LIMITE AMOUNT OF FLUID-LOSS CONTROL IN WATER-BASE DRILLING FLUIDS. IT IS

A POLYMER STICK THATEASILY ADDED TO THE DRILLSTRING DURING

CONNECTIONS AND PROVIDES A CONSISTENT METHOD OF,ACRYLIC COPOLYMER

BASE,PAIL,APPEARANCE: TUBE FILLED WI STICK SPECIFIC GRAVITY: 1.0 SOLUBILITY

SOLUBLE IN WATER SIZE: 1-1/4 X 15 IN.

1000876207





9COM/9CAT

166Chemicals

(Drilling Fluids )

Marble Chips CaCO3, 550-650,

2200 LB

ADMIXTURE: DRILLING MUD; GROUND MARBLE: COARSE GRADE; (550-650)





ROCKS,GROUND MARBLE COARSE, 550-650 MICRON PURE, METAMORPHOSED

CALCIUM CARBONATE CACO3 & CAMG (CO3)2,BREATHLESS 1000 KG OR 2200 LB





15% HCL ACID, TYPE "MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE,

WATERPROOF, UV STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT,

MINIMUM TENSILE STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO

SUSTAIN NORMAL HANDLING & OUTSIDE STORAGE FOR THE PRODUCT'S SHELF

LIFE IN SAUDI ARABIAN CLIMATIC CONDITIONS.THE DISPOSABLE SUPER SACKS

SHOULD HAVE AT# LEAST 75% OF THEIR SHELF LIFE REMAINING WHEN # SHIPPED

OR RECEIVED AT DESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.

1000021818

167Chemicals

(Drilling Fluids )

OIL SOLUBLE CORROSION

INHIBITOR

INHIBITOR: CORROSION; 55-GAL DRUM. INHIBITOR; CORROSION, COAT-415

TYPE,55 GAL DRUM,CATIONIC, OIL SOLUBLE, DISPERSIBLE IN WATER BASED

DRILLING MUDS, FILMING POLYAMINE SALT OF A MODIFIED FATTY ACID FOR

DRILL PIPE PROTECTION.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED

TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN

(COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE

OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE

PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS

AND/OR PAPER BAGS.

1000022134





9COM/9CAT

168Chemicals

(Drilling Fluids)


100 lb/BAG

ADDITIVE: CEMENT; 50 KG, CALCIUM CHLORIDE (94-98%) ADMIXTURE CEMENT;

FOR A WATER SOLUBLE WEIGHTING AGENT FOR FORMULATING SOLIDS-FREE

COMPLETION BRINES AND TO PROVIDE THE DESIRED WATER PHASE ACTIVITY IN

INVERT EMULSION MUDS. ALSO USED AS AN ACCELERATOR IN OIL WELL CEMENT

SLURRIES,TYPE 1,94-98% CALCIUM CHLORIDE (CAC12) POWDER, FLAKES OR

PELLETS,50 KG OR 100 LB BAG,ASTM D98,WATERPROOF POLYETHYLENE LINED

BAG SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT

PACKING MANUAL NO PARTICLES GREATER THAN 5MM IN ANY DIMENSION,

MULTI-WALL MOISTURE-PROOF POLYETHYLENE LINED BAGS CONTAINER

PROPERLY LABELED, W/ VENDOR'S NAME, MANUFACTURER'S NAME AND

LOCATION, PRODUCTION DATE, BATCH NO. AND SAUDI ARAMCO STOCK

NUMBER, FORM DRY, FREE FLOWING FLAKES, GRANULES OR PELLETS NOTE: THE

CONSTRUCTION OF THE MULTI-WALLED PAPER BAG SHALL BE AS FOLLOWS: 1ST

PLY 50 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN.

NATURAL KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY

ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF

POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM.

4TH PLY 50 LB MIN.

1000022536





9COM/9CAT

169Chemicals

(Drilling Fluids )

NONTREATED SODIUM

BENTONITE 25KG SACK

ADMIXTURE: DRILLING MUD GROUND NONTREATED BENTONITE ADMIXTURE

DRILLING MUD; DRY, FREE FLOWING POWDER FORM,BENTONITE SODIUM

MONTMORILLONITE,FOR VISCOSIFIER AND FILTRATE REDUCER FOR WATER-

BASED FLUIDS,NATURAL SMECTITE (SODIUM MONTMORILLONITE) THAT

CONTAINS NO POLYMERS OR ANY OTHER CHEMICALS,MULTI-WALLED BAGS, 25

KG OR 50 LB BAG,API 13A AND API 13 I (LATEST EDITION),CONTAINER TO BE

PROPERLY LABELED W/VENDOR'S NAME, MANUFACTURER'S NAME AND

LOCATION, PRODUCTION DATE, BATCH NUMBER AND STOCK NUMBER. OTHER

ASSOCIATED ELEMENTS IN THE COMPOSITION MUST NOT BE HARMFUL TO

PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES. PROPER TUBE

SAMPLING AND QUARTERING TO BE CARRIED OUT BY TRAINED AND

EXPERIENCED PERSONNEL. NOTE: THE CONSTRUCTION OF THE MULTI-WALLED

PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL

KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD

PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE

AN INNER POLYETHYLENE LINER THE BAG MUST BE VALVE/SPOUT TYPE

COMPLETELY SEALED.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED

TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN

(COO).

1000021551

170Chemicals

(Drilling Fluids)MANGANESE TETRAOXIDE - BAG

ADDITIVE DRILLING FLUID; POWDER FORM,MANGANESE TETRAOXIDE,FOR

MANGANESE TETRAOXIDE IS AN INORGANIC COMPOUND WHICH IS USED TO

PREPARE HIGH DENSITY FLUIDS FOR USE IN DRILLING, COMPLETION OR WORK-

OVER OF OIL OR GAS WELLS.,MANGANESE TETRAOXIDE,BAG,APPEARANCE:

REDDISH-BROWN POWD.

1000845612

171Chemicals

(Drilling Fluids)COTTONSEED HULLS, 55 LB

ADMIXTURE: DRILLING MUD; 25 KG (50 LB) 4 PLY PAPERSACK; SHIPMENT OF

PRODUCT SHALL CONFORM TO SAUDI ADMIXTURE DRILLING MUD; COARSE

FORM,COTTONSEED HULLS,FOR LOST CIRCULATION,FINES & DUST FREE,25 KG OR

50 LB BAG,SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT

PACKING MANUAL NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER

BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT

PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY

SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED

INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH

A MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 80 LB MIN. NATURAL KRAFT

PAPER (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY

SEALED, MOISTURE AND WATER PROOF.

1000021603





9COM/9CAT

172Chemicals

(Drilling Fluids)BAROFIBER COARSE, 40 LB

ADMIXTURE DRILLING MUD; ADDITIVE, FIBROUS CELLULOSIC MATERIAL

FORM,FIBROUS CELLULOSIC MATERIAL,FOR DESIGNED TO EFFECTIVELY SEAL THE

BOREHOLE WALL IN SAND AND FRAC AND TO STOP THE LOSS OF DRILLING FLUID

BY PLUGGING THE VOIDS,FIBROUS CELLULOSIC MATERIAL,40

LB/SACK,APPEARANCE: COARSE:GRANUALTED MATERIAL, BULK DENSITY: 31

LB/FT(497 KG/M), PH 4.9, SPECIFIC GRAVITY: 1.3, ODOR: ODORLESS,

DENSITY@20C (KG/L) 1.1, FREEZING POINT 190 C, FLASH POINT 193 C, SOLUBILITY

IN WATER: INSOLUBLE, OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL

TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.

1000789221

173Chemicals

(Drilling Fluids)LIQUID PHPA

ADMIXTURE: DRILLING MUD; PARTIALLY HYDROLIZED POLYACRYLAMIDE (PHPA);

MINIMUM 32% ACTIVE NON CONFIGURED; ADMIXTURE: DRILLING MUD,

PARTIALLY HYDROLIZED POLYACRYLAMIDE (PHPA), MINIMUM 32% ACTIVE FROM

LIQUID BASE MATERIAL PARTIALLY HYDROLIZED POLYACRYLAMIDE SERVICE

SHALE STABILIZER COMPOSITION 32% ACTIVE CONTAINER 5 GAL/CAN

STANDARDS SUPPLEMENTARY REQUIREMENTS DRILLING FLUID ADDITIVE

1000021673

174Chemicals

(Drilling Fluids )


2200 LB

ADMIXTURE: DRILLING MUD; MARBLE CHIPS: (1900-2100 MICRONS)

METAMORPHIC CALCIUM CARBONATE CACO3 & CAMG (CO3)2 ADMIXTURE

DRILLING MUD; DRY CHIPS FORM,CALCIUM CARBONATE (CACO3)

METAMORPHOSED,FOR USED AS BRIDGING AGENT IN BRINE-BASED, OIL-BASED


ROCKS,(1900-2100 MICRONS) METAMORPHIC CALCIUM CARBONATE, PURE,

SOLUBLE,BREATHLESS 1000 KG OR 2200 LB BAG,PROPERLY LABELED, VENDOR'S

NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE,BATCH NO.

AND STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE, LIMESTONE CHIPS

ARE NOT ACCEPTABLE, LIFTING STRAP BAG IS DISPOSABLE, WATERPROOF, UV

STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT MINIMUM TENSILE

STRENGTH FACTOR 5, FLEXURAL STRENGTH SUFFICIENT TO SUSTAIN NORMAL

HANDLING & OUTSIDE STORAGE FOR THE PRODUCT'S SHELF LIFE IN SAUDI

ARABIAN CLIMATIC CONDITIONS.THE DISPOSABLE SUPER SACKS SHOULD HAVE

AT LEAST 75% OF THEIR SHELF LIFE REMAINING (THE PERIOD FROM THE DATE OF

MANUFACTURE TO THE WARRANTED EXPIRATION DATE) WHEN SHIPPED OR

RECEIVED AT DESIGNATED PLACE OF DELIVERY TO SAUDI ARAMCO.#REFER TO

SAP NUMBER: 1000840600 FOR DISPOSABLE SUPER SACKS SPECIFICATION..

1000021677





9COM/9CAT

175Chemicals

(Drillning Fluids)

Marble Medium CaCO3, 135-165,

55 LB

ADMIXTURE: DRILLING MUD; GROUND MARBLE: MEDIUM GRADE; 135-165





ROCKS,GROUND MARBLE MEDIUM ,135-165 MICRON PURE METAMORPHOSED

CALCIUM CARBONATE CACO3 & CAMG (CO3)2,MULTI-WALLLED, 25 KG OR 50 LB





IN 15% HCL ACID, TYPE "MEDIAN D-50", NOTE: THE CONSTRUCTION OF THE



KRAFT PAPER. 3RD PLY 80 LB MIN.

1000021817

176Chemicals

(Drilling Fluids)

HYDROCARBON BASED

DEGREASER

CLEANER; CONTACT TYPE,LIQUID FORM,FOR ELECTRIC MOTOR AND

EQUIPMENT,20 LITER CAN,HYDROCARBON BASED CLEANER & DEGREASER,FLASH

POINT (CLOSED CUP) 63 DEG C, NON-CONDUCTIVE & NON-CORROSIVE,

APPERANCE CLEAR LIQUID.

1000732382





9COM/9CAT

177Chemicals

(Drilling Fluids )

Marble Chips CaCO3, 550-650, 55

LB

ADMIXTURE: DRILLING MUD; GROUND MARBLE: COARSE GRADE; 550-650





ROCKS,GROUND MARBLE COARSE, 550-650 MICRON PURE METAMORPHOSED

CALCIUM CARBONATE CACO3 & CAMG (CO3)2,MULTI-WALLED, 25 KG OR 50 LB





IN 15% HCL ACID, TYPE "MEDIAN D-50", NOTE: THE CONSTRUCTION OF THE




BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE

VALVE/SPOUT TYPE COMPLETELY SEALED.PRODUCT MANUFACTURER AND OR

SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND

CERTIFICATE OF ORIGIN (COO).

1000021815

178Chemicals

(Drillning Fluids)


55 LB

ADMIXTURE: DRILLING MUD; DRY CHIPS, (1900-2100 MICRONS) METAMORPHIC

CALCIUM CARBONATE CACO3 & CAMG (CO3)2 ADMIXTURE DRILLING MUD; DRY

CHIPS FORM,CALCIUM CARBONATE (CACO3) METAMORPHOSED,FOR USED AS

BRIDGING AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS TO

CONTROL FLUID LOSSES INTO RESERVOIR ROCKS,(1900-2100 MICRONS)

METAMORPHIC CALCIUM CARBONATE, PURE, SOLUBLE,MULTI-WALLED, 25 KG

OR 50 LB BAG,PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME

AND LOCATION, PRODUCTION DATE, BATCH NO. AND STOCK NO. SIZED

METAMORPHIC CALCIUM CARBONATE LIMESTONE CHIPS ARE NOT ACCEPTABLE

NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER)


PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN.

1000021676





9COM/9CAT

179Chemicals

(Drilling Fluids )

MARBLE FINE, PURE CaCO3 - 55

LB BAGS

ADMIXTURE: DRILLING MUD; GROUND MARBLE: FINE GRADE; 9-11 MICRON

PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD; DRY, FREE

FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)

METAMORPHOSED,FOR USED AS WEIGHTING, BRIDGING AND FILTRATE CONTROL

AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS,GROUND

MARBLE FINE, 9-11 MICRON PURE METAMORPHOSED CALCIUM CARBONATE

CACO3 & CAMG (CO3)2,MUTI-WALLED, 25 KG OR 50 LB BAG,PROPERLY LABELED,

VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION

DATE,BATCH NO. AND STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE

GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT ACCEPTABLE 9-11

MICRON PARTICLE, 95% SOLUBLE IN 15% HCL ACID, TYPE "MEDIAN D-50", NOTE:


AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY

75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER

(EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE

BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.PRODUCT


ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000021814

180Chemicals

(Drilling Fluids)

THINNER MODIFIED TANNIN -

DRILL THIN

ADDITIVE DRILLING FLUID; BROWN COLORED POWDER FORM,MODIFIED TANNIN

COMPOUND,FOR USED AS MUD CONDITIONER PROVIDING RHEOLOGY CONTROL

IN WATER BASE FLUIDS WITH MAXIMUM DEFLOCCULATING AND SHEAR

STRENGTH REDUCTION AT LOW CONCENTRATIONS.,25 LB MULITIWALL PAPER

BAGS,APPEARANCE: BROWN COLORED POWD,CONTAINER MUST BE PROPERLY

LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION,

PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT

PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND

OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND

CERTIFICATE OF ORIGIN (COO).

1000845427





9COM/9CAT

181Chemicals

(Drilling Fluids)

CEMENT SPACER VISCOSIFIER, IN-

HOUSE

ADDITIVE DRILLING FLUID; GREY POWDER FORM,VISCOSIFIER FOR IN-HOUSE

CEMENT SPACER SYSTEM,,FOR COMPONENT OF AN IN-HOUSE CEMENT SPACER

SYSTEM FOR USE WITH OBM (OIL-BASE-MUD) SYSTEMS, OR OTHER COMPATIBLE

MUD SYSTEMS DESIGNED TO PROVIDE FLUID LOSS CONTROL AND VISCOSITY

ALLOWING USERS TO EASILY FORMULATE A CEMENT SPACER WITH THE DESIRED

RHEOLOGY CERTIFICATE OF ORIGIN COO DENSITY THIS VISCOSIFIER I LOSURF-

259 SAP #1000811529 A SYSTEM TO FORMULATE -S SAP # 1000903745 ENT

SPACER DESIGNS FOR IDS PACKAGED IN 50-LB COMBINATION WITH DIACEL®

TIWALL WATER RESISTANT BAGS ANALYSIS (COA) WITH NON-AQUEOUS DRILLING

DER TO SUBMIT CERTIFICATE,PROPRIETARY. COMPONENT FOR USE IN IN-HOUSE

CEMENT SPACER SYSTEM,BAG,APPEARANCE: OFF-WHITE POWDE SPECIFIC

GRAVITY: 2.08 G/M TEMPERATURE: 40°F - 400°F CONCENTRATION: 2-22 LBS/BB.

1000903746

182Chemicals

(Drilling Fluids)

CEMENT SPACER ANTI-FOAMER,

IN-HOUSE

ADDITIVE DRILLING FLUID; LIQUID FORM,ANTI-FOAMER FOR IN-HOUSE CEMENT

SPACER SYSTEM,FOR COMPONENT OF AN IN-HOUSE CEMENT SPACER SYSTEM

FOR USE WITH OBM (OIL-BASE-MUD) SYSTEMS, OR OTHER COMPATIBLE MUD

SYSTEMS DESIGNED TO PREVENT AIR-ENTRAPMENT AND USED DURING MIXING

TO PROVIDE AN ACCURATE FLUID WEIGHT. THIS ANTI-FOAMER IS USED IN

COMBINATION LOSURF-259(SAP# 1000811529 A SYSTEM TO FORMULATE ENT

SPACER DESIGNS FOR USE TIFICATE . TIFICATE OF ORIGIN COO IDS PACKAGED IN

A 5 GALLON -ANALYSIS (COA) AND STIC PAIL .VENDER TO SUBMIT COSIFIER (SAP#

1000903746) H DIACEL® ADJUSTABLE SPACER H NON -AQUEOUS

DRILLING,PROPRIETARY. COMPONENT FOR USE IN IN-HOUSE CEMENT

SPACER,PAIL,APPEARANCE: VISCOUS WHITE SPECIFIC GRAVITY = 1.00 G BOILING

POINT > 35 C (>95F VISCOSITY: 10000 CST FLASHPOINT: > 101.1°C (>21.

1000903745

183Chemicals

(Drilling Fluids)

CHEMICAL: SODIUM

HEXAMTAPHOSPHATE

CHEMICAL; GR FOOD,SODIUM HEXAMETAPHOSPHATE,FOR POTABLE WATER

TREATMENT,GRANULAR FORM,40-45 KG (88-100 LB) DRUM,SODIUM

HEXAMETAPHOSPHATE,AWWA B502,REQUIRES SAUDI ARAMCO HAZCOM LABEL

IN MM# 1000642502

1000186247





9COM/9CAT

184Chemicals

(Drilling Fluids)Acid Precursor - ORCA-B

ADDITIVE DRILLING FLUID; LIQUID FORM,ORGANIC ESTERS,FOR A LIQUID

ORGANIC ACID PRECURSOR WHICH WILL GENERATE ORGANIC ACID IN#SITU

DOWNHOLE WHICH HAS THE CAPABILITY TO DISSOLVE CALCIUM CARBONATE

FILTER CAKE SOLIDS TO REMOVE FORMATION DAMAGE DUE TO CARBONATE

SOLIDS PLUGGING,55 GAL PER DRUM,A PROPRIETARY BLEND OF ORGANIC

ESTERS,PHYSICAL PROPERTIES:APPEARANCE,A LIQUID ORGANIC ACID PERCURSOR

WHICH WILL GENERATE ORGANIC ACID IN-SITU DOWNHOLE WHICH HAS THE

CAPAVILITY TO DISSOLVE CALCIUM CARBONATE FILTER CAKE SOLIDS TO REMOVE

FORMATION DAMAGE DUE TO CARBONATE SOLIDS PLUGGING. IT IS TO BE USED

TOGETER WITH ORCA-4 WATER-WETTING SURFCTANT IN THE PREPARATION OF

THE PROPRIETARY MUDWASH FILTER-CAKE BREAKER SYSTEM FOR OBM

WELLBORE CLEAN-UP. VENDOR TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND

CERTIFICATE OF ORIGIN (COO). 210 KG (55 GAL)

1000905195

185Chemicals

(Drilling Fluids)

Water wetting surfactant - ORCA-

4

ADDITIVE DRILLING FLUID; LIQUID FORM,WATER WETTING SURFACTANTS,FOR A

LIQUID WATER WETTING SURFACTANT MIXTURE USED IN THE PREPARATION OF

WELLBORE CLEAN-UP FLUID TO ALTER THE WETTEABILITY OF THE FILTER CAKE

SOLIDS FROM OIL-WET TO WATER # WET.,A WATER-WETTING SURFACTANT

MIXTURE,55 GAL PER DRUM,PHYSICAL PROPERTIES : APPEARAN,#CONTAINER

MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME

LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S

PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS

NEEDED.####A LIQUID WATER WETTING SURFACTANT MIXTURE USED IN THE

PREPARATION OF WELLBORE CLEAN-UP FLUID TO ALTER THE WETTEABLITY OF

THE FILTER CAKE SOLIDS FROM OIL-WET TO WATER-WET. IT IS TO BE USED

TOGETHER WITH ORCA-B THE ACID PRECURSOR IN THE PREPARATION OF THE

PROPRIETARY MUDWASH FILTER CAKE BRAKER SYSTEM FOR OBM WELLBORE

CLEAN-UP. VENDER TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND

CERTIFICATE OF ORIGIN (COO). 200 KG (55 GAL).

1000905196





9COM/9CAT

186Chemicals

(Drilling Fluids)

WBM filter cake removal -

Enzyme

ADDITIVE DRILLING FLUID; LIQUID FORM,ENZYME PROTEIN,FOR FILTER CAKE

REMOVAL FOR WATER BASED MUD AND BRIDGING PARTICLES PRESENT IN THE

CAKE, REMOVING THE NEAR-WELLBORE DAMAGE,ENZYME PROTEIN,DRUM (ONE

DRUM = 55 GALLONS),APPEARANCE: LIGHT BROWN LIQUID,ADDITIVE FOR

DRILLING FLUID. IT IS A FILTER CAKE REMOVAL FOR WATER BASED MUD WHICH

BREAKS DOWN THE STARCH POLYMERS PRESENT IN THE MUD FILTER CAKE

BREAKING ITS INTEGRITY AND ENABLE MORE EFFICIENT ACIDIZING TREATMENT

OF ACID-SOLUBLE DRILL SOLIDS AND BRIDGING PARTICLES PRESENT IN THE CAKE,

REMOVING THE NEAR-WELLBORE DAMAGE. TYPICAL TREATMENT IS 5 - 6% V/V.

SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA)

AND CERTIFICATE OF ORIGIN (COO).

1000908540

187Chemicals

(Drilling Fluids)

LOW TOXICITY BASED OIL

FSARALINE 185V

ADDITIVE DRILLING FLUID; CLEAR LIQUID FORM,CLEAN NATURAL GAS

ORIGIN,FOR IT IS LOW TOXICITY MINERAL OIL USE AS BASE OIL FOR

FORMULATING OIL-BASED DRILLING FLUID IT IS COMPATIBLE WITH ALL OIL

BASED DRILLING FLUIDS ADDITIVES. IT IS COMPARABLE WITH LOW TOXICITY

MINERAL OIL AND TS SPECIFICATION OF # 1000022138 AS STATED BEL,A

MIXTURE OF ALKANES. CLEAR AND ODORLESS PARAFFIN OIL,GALLON,TM D1319)

TM D611) TM D93) LYSIS (COA) AND LINE POINT: MORE THAN 75 DE HORIZED

ZENE CONTENT: NIL PPM ASSAY TEST): > 100,000 PPM. RY OUT TIFICATE OF

ORIGIN (COO). SH POINT: MORE THAN 85 DEG 50 (MYSID SHRIMP 96-HR : 0.77-

0.97 (ASTM D1298) FINS CONTENT: NIL PPM KAGING AS PER SAUDI ARAMCO

YNUCLEAR AROMATIC: NIL PPM PLING AND TESTING AS NEEDED DI ARAMCO

PERSONNEL WILL CIFIC GRAVITY AT 15 OC : PLIER/VENDOR IS REQUIRED SUBMIT

LAB CERTIFICATE OF AL AROMATIC: LESS THAN 0.5.

1000908544

188Chemicals

(Drilling Fluids)

CHEMICAL: GR TECHNICAL,

SODIUM

CHEMICAL; GR TECHNICAL,SODIUM CARBONATE,FOR WATER

TREATMENT,GRANULAR FORM,40 OR 50 KG SACK,98% CALCINED,SODA ASH

(WASHING SODA),AWWA B201,SHIPMENT OF PRODUCT SHALL CONFORM TO

SAUDI ARAMCO EXPORT PACKING MANUAL REQUIRES SAUDI ARAMCO HAZCOM

LABEL IN MM# 1000644353

1000186131

189Chemicals

(Drilling Fluids)

CHEMICAL: GR ACS, SODIUM

SULFITE,

CHEMICAL; GR ACS,SODIUM SULFITE,FOR REDUCE FREE CHLORINE & OXYGEN

CONTENT OF RAW WATER PRELIMINARY TO WATER SOFTENING,POWDER

FORM,50 KG (110 LB) DRUM WITH POLYETHYLENE INNER BAG,97% ANHYDROUS

SODIUM SULFITE MIN UNCATALYZED SOLUBLE IN WATER,OXYGEN

SCAVENGER,REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000642488

1000186443





9COM/9CAT

190Chemicals

(Drilling Fluids)

ANTIFREEZE: TRIETHYLENE

GLYCOL, LIQUID

ANTIFREEZE; TRIETHYLENE GLYCOL TYPE,TECHNICAL, LIQUID, 208.2 LITER/ DRUM

TO BE LABELED IN ARABIC AND ENGLISH AS FOLLOWS: TRIETHYLENE GLYCOL S/N

26-922-105-00 REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 10006441911000187171

191Chemicals

(Drilling Fluids )

ANTIFREEZE: MONO ETHYLENE

GLYCOL (MEG)

ANTIFREEZE; MONO ETHYLENE GLYCOL (MEG) TYPE,SPECIFIC GRAVITY 20/20 C

1.115-1.116, DISTILLATION RANGE 196.0-199.0 DEG C AT 760 MM HG, WATER

(W/W) 0.05% MAX, IRON (PPM W/W) 0.1 MAX, ACIDITY WT AS ACETIC ACID

0.001% MAX, 225-250 KG, 208.2 L (55 GAL) DRUM, TECHNICAL, LIQUID, ARAMCO

LABORATORY ANALYSIS IS REQUIRED, DRUM TO BE LABELED IN ARABIC AND

ENGLISH AS FOLLOWS, "MONO ETHYLENE GLYCOL (MEG)" S/N 26-382-444-00

REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644200

1000182767

192Chemicals

(Drilling Fluids)

CHEMICAL: GR USP, CITRIC ACID,

POWDER

CHEMICAL; GR USP,CITRIC ACID,FOR LABORATORY,POWDER FORM,50 KG (110 LB)

NET WT POLYETHYLENE LINED DRUM,99.5% CITRIC ACID MIN,CITRIC ACID

(ANHYDROUS),REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 10006442781000177936

193Chemicals

(Drilling Fluids)

CHEMICAL: GR A, METHANOL,

LIQUID,

CHEMICAL; GR A,METHANOL,LIQUID FORM,208.2 L (55 US GAL) STEEL

DRUM,SYNTHETIC,METHYL ALCOHOL (WOOD ALCOHOL),ASTM D1152, FED SPEC

O-M-232G GRADE A,DRUM TO BE LABELED IN ARABIC & ENGLISH AS FOLLOWS:

"METHANOL" S/N 26-646-940-00 REQUIRES SAUDI ARAMCO HAZCOM LABEL IN

MM# 1000642494

1000184543

194Chemicals

(Drilling Fluids )31% HCl, 13 GAL

CHEMICAL; GR TECHNICAL,HYDROCHLORIC ACID,FOR REGENERATION OF

DEMINERALIZER BEDS,LIQUID FORM,49 L (13 GAL) POLYETHYLENE CARBOY

ENCASED IN A WOODEN BOX,31% SOLUTION W/W MIN, IRON 20 PPM MAX,

SULFATE 0.2% MAX, CLORINE (CL2) 100 PPM MAX, ORGANIC CONTAMINANTS

0.05 GM/L MAX,MURIATIC ACID,UN 1789, CAS NO 7647-01-0,US DEPT OF

TRANSPORT HAZARDOUS LABEL "CORROSIVE" MUST BE AFFIXED TO CONTAINER

REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000642493

1000183214

195Chemicals

(Drillning Fluids)SILICA FLOUR

ADDITIVE, DRILLING FLUID: ADDITIVE, CEMENT, 50 KG (100 LB) SACK, TYPE D-66

SILICA FLOUR, WATER LOSS AGENT ADDITIVE DRILLING FLUID; ADDITIVE,

CEMENT, 50 KG (100 LB) SACK, TYPE D-66, SILICA FLOUR, WATER LOSS AGENT.

PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB

CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000022429





9COM/9CAT

196Chemicals

(Drilling Fluids)POTASSIUM HYDROXIDE

CHEMICAL; GR TECHNICAL,POTASSIUM HYDROXIDE,FREE FLOWING GRANULAR

OR FLAKES FORM,25 KG (55 LBS)/SACK,POTASSIUM CARBONATE, K2CO3 0.8%

WT, MAXIMUM POTASSIUM CHLORIDE 0.02% WT MAXIMUM, IRON 0.001% WT

MAXIMUM,90% KOH PURITY, SHIPMENT OF PRODUCT SHALL CONFIRM TO SAUDI

ARAMCO EXPORT PACKING MANUAL. SAUDI ARAMCO WILL CARRY OUT

SAMPLING AND TESTING AS NEEDED.

1000185389

197Chemicals

(Drilling Fluids)FIBER, 25 LB

ADMIXTURE DRILLING MUD; ADDITIVE, FIBROUS CELLULOSIC MATERIAL

FORM,FIBROUS CELLULOSIC MATERIAL,FOR DESIGNED TO EFFECTIVELY SEAL THE

BOREHOLE WALL IN SAND AND FRAC AND TO STOP THE LOSS OF DRILLING FLUID

BY PLUGGING THE VOIDS,FIBROUS CELLULOSIC MATERIAL,25

LB/SACK,APPEARANCE: FINE: BROWN POWDERED, BULK DENSITY: 31 LB/FT(497

KG/M), PH 4.9, SPECIFIC GRAVITY: 1.3, ODOR: ODORLESS, DENSITY@20C (KG/L)

1.1, FREEZING POINT 190 C, FLASH POINT 193 C, OTHER ASSOCIATED ELEMENTS

MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID

PROPERTIES.

1000789220





9COM/9CAT

198Chemicals

(Drilling Fluids )

BARITE DISP. BAG, 90X90X100

CM, 1.5 TON

CONTAINER; DISPOSABLE BAG TYPE,SIZE 90 CM X 90 CM X 100 CM,1.5 TON OR

3300 LBS,BARITE,REGULAR BAG SHAPE,TOP STRAP CLOSURE,ORANGE,THE FOUR

LIFITNG STRAPS SHOULD EXTEND TO THE FULL BODY OF THE BAGS, REFERENCE

TO SAUDI ARAMCO PACKING SPECIFICATIONS MS-8314-11, 1. DIMENSION &

WEIGHT: HEIGHT 100 CMS(39"), WIDTH: (90 CMSX 90 CMS) 35" X35", WEIGHT:

2.90 KGS(WITH LINER), VARIANCE ON WEIGHT: 100 GRAMS +/-, LAMINATION:NIL,

2. BODY FABRIC: MATERIAL POLYPROPYLENE, COLOUR: ORANGE, GSM: 200,

MESH: 11X12, 3. GENERAL: SAFE WORKING LOAD: 1500 KGS, SAFETY FACTOR:

5:01, 4. PRINTINGL: ONE SIDE ONE COLOUR, 5. SEWING THREAD: COLOUR:

WHITE, 6. LIFTING LOOP: CROSS CORNER: FOURLOOPS, LOOP WIDTH: 7.5 CMS,

LOOP LENGTH ABOVE THEBAG: 30 CMS, LOOP LENGTH ON THE BAG: 40 CMS,

FULL LOOP: AROUND THE BAG, STEVE DORING LOOP: NIL, FILLING

ARRANGEMENT: SPOUT DIA: 40CMS (16"), LENGTH OF SPOUT: 50CMS (20"),

COLOUR OF SPOUT FABRIC: WHITE, TYPE OF CLOSURE: SIMPLE CLOSURE,

DISCHARGE ARRANGEMENT: NO SPOUT AND BOTTOM MUST BE FLAT, LINER

SPECIFICATIONS: TYPE OF LINER: PILLOW TYPE LOOSE LINER INSERTED AND

FASTENED TO BOTTOM SPOUT, SIZE OF LINER: 190 CMSX 300 CMS, MICRON

THICKNESS OF LINER: 120 MICRON MINIMUM, WEIGHT OF LINER: 1200 GRAMS

+/- 50 GRAMS, WEIGHT OF BAG INCLUSIVE OF LINER: 2700 GRAMS +/- 100

GRAMS, STRENGTH PARAMETERS: BODY FABRIC: 200 GSM WITH RF (STRENGTH-

ABOVE 200KGF), BOTTOM PANEL: 205 GSM (STRENGTH-ABOVE 210KGF), TOP

PANEL: 160 GSM (STRENGTH-ABOVE 130KGF), FILLING AND DISCHARGE SPOUT:

75 GSM (STRENGTH-ABOVE 80KGF), LIFTING LOOP: 55G/M (STRENGTH-ABOVE

1950KGF), BODYLOOP: 30G/M (STRENGTH-ABOVE 950KGF), TIE TAPE: 6G/M

(STRENGTH-ABOVE 150KGF), SEWING THREAD USEDIN PANEL ATTACHMENT:

3300 DENIER (STRENGTH-ABOVE 20KGF), SEWING THREAD USED IN LOOP

ATTACHMENT: (1000 DENIER/2PLAY (STRENGTH-ABOVE 15KGF).

1000840600

199Chemicals

(Drilling Fluids)

SODIUM BROMIDE (NaBr) WHITE

CRYSTALS

ADDITIVE DRILLING FLUID; FINE CRYSTAL FORM,SODIUM BROMIDE,FOR SODIUM

BROMIDE IS AN INORGANIC COMPOUND THAT IS USED TO PREPARE DENSE

CLEAR FLUIDS FOR USE IN DRILLING, COMPLETION OR WORK&#8208 GAS WELLS.

R OF OIL OR,SODIUM BROMIDE,PP WOVEN BAG WITH PE LINER

INSIDE,APPEARANCE: WHITE FINE CRYSTAL,CONTAINER MUST BE PROPERLY

LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION,

PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT

PROPER SAMPLING AND TESTING AS NEEDED.

1000847074





9COM/9CAT

200Chemicals

(Drilling Fluids)POWDER PHPA

ADDITIVE DRILLING FLUID; POWDER FORM,HIGH-MOLECULAR WEIGHT PARTIALLY-

HYDROLYZED POLYACRYLAMIDE (PHPA),FOR IT PROVIDES BOREHOLE STABILITY

AND REDUCES FRICTION IN SENSITIVE SHALE SECTIONS. IT, ALSO, ACTS AS A

FILTRATION CONTROL AND INCREASES VISCOSITY IN WATER-BASED DRILLING

FLUIDS.,PARTIALLY-HYDROLYZED POLYACRYLAMIDE (PHPA),BAG,APPEARANCE:

GRANULAR WHITE SOLID POLYMER. SOLUBILITY I,CONTAINER MUST BE


LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL

CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.

1000866365

201Chemicals

(Drilling Fluids)ORGANOPHILIC CLAY

ADDITIVE DRILLING FLUID; POWDER FORM,ORGANOPHILIC CLAY,FOR PROVIDES A

RAPID YIELD UNDER LOW-SHEAR AND LOW-TEMPERATURE CONDITION AND

DEVELOPS THE MAXIMUM RHEOLOGICAL PROPERTIES SHORTLY AFTER BEING

MIXED. IT MORE EFFECTIVE IN ALL-OIL FLUIDS THAN STANDARD ORGANOPHILIC

CLAYS,ORGANOPHILIC CLAY,BAG,APPEARANCE: POLYMER RELATIVE DENSITY: 1.7

@ 20 SOLUBILITY IN WATER: INSOLU.

1000866368

202Static Equipment

(Heat Transfer)

EJECTOR; AIR; STEAM OR

WATER.;EJECTOR; AIR,STEAM OR WATER.,AIR, STEAM OR WATER.

6000002415

203Static Equipment

(Heat Transfer)

HEAT EXCHANGER; ELECTRIC; 32-

SAMSS-027;HEAT EXCHANGER; ELECTRIC TYPE,32-SAMSS-027

6000002436

204Static Equipment

(Heat Transfer )

FLARE; PROCESSED PLANT;

INCLUDING TEMPER

FLARE; PROCESSED PLANT TYPE,32-SAMSS-022,31-SAMSS-003 32-SAMSS-004,32-

SAMSS-011 32-SAMSS-013,34-SAMSS-830 34-SAMSS-711,INCLUDING

TEMPERATURE CONTROLS,IGNITERS AND STACK AND BURNPIT WITH

ACCESSORIES, FOR FGRS INCLUDES: COMPRESSORS. PRESSURE VESSELS(WATER

SEAL DRUMS) OR CONTROL VALVES WITH BUCKING PIN VALVES, BLOWERS AND

AIR COOLED HEAT EXCHANGERS. FOR IN-HOUSE HPAAS (HIGH PRESSURE AIR

ASSIST SYSTEM) FLARE SMOKELESS APPLICATION INCLUDE: HPAAS FLARE TIP,

COMPRESSORS, PRESSURE VESSELS(AIR DRYER AND RECEIVER DRUM), CONTROL

VALVES AND HEAT EXCHANGERS.

6000002508

205 Static EquipmentCONDENSER; SURFACE STEAM

SYSTEM;CONDENSER; SURFACE STEAM SYSTEM TYPE,32-SAMSS-007,CONDENSER SYSTEM

TYPE, COMPLETE WITH EJECTORS & EXCHANGER FACE STEAM6000002534

206Static Equipment

(Heat Transfer)

BURNER; HIGH INTENSITY, FOR

SULFURBURNER; HIGH INTERSITY TYPE,HIGH INTERSITY,FOR SULFUR RECOVER UNIT

REACTION FURNACE6000011229

207 Static Equipment SKID; THERMAL OXIDIZERSKID; THERMAL OXIDIZER TYPE,WITH RE-BOILER

6000011955

208Static Equipment

(Fittings)

SLEEVE; PIPE; TWO HALVES;

BOLTED FLANGEDSLEEVE PIPE BOLTED; STEEL,FOR PIPE REPAIR,FOR PIPE REPAIR

6000000134





9COM/9CAT

209Static Equipment

(Fittings)

FLANGE; BLIND; COPPER-ALLOY,

EEMUA 145;FLANGE BLIND NON-KHUFF; FLANGE COPPER-ALLOY, EEMUA 145 ND

6000000180

210Static Equipment

(Fittings)

FLANGE; PIPE; COPPER NICKEL,

EEMUA 145FLANGE PIPE; ALL DESIGNS TYPE,EEMUA 145,EEMUA 145,COPPER-ALLOY

FLANGES AND CS BACKING (LAP JOINT) FLANGES PER EEMUA6000000181

211Static Equipment

(Fittings)

FLANGE; COMPACT WN PAIR, M-

F CONNECTOR

FLANGE PIPE; COMPACT FLANGE WN PAIR, WN-BLIND, WN-WN SWIVEL-RING OR

AS DESIGNED TYPE,ASME CLASS 900 AND ABOVE SUPPLY,WN WITH SELF-

ENERGIZING SEAL TERMINAL,ANY STEEL PER 02-SAMSS-011,ASME SEC VIII

DESIGN,02-SAMSS-011,COMPLETE ASSEMBLY WITH MALE-FEMALE CONNECTOR,

SEAL RING, BOLTS AND NUTS

6000000188

212Static Equipment

(Fittings)TRAP: STEAM; MECHANICAL

TRAP STEAM; FLOAT, BALL TYPE,FLANGED, THREADED, SOCKET INLET,FLANGED,

THREADED, SOCKET OUTLET,PR PISG,PISG INLET,LB/HR CONDENSA,DEG F (DEG

C0) OPERATIN,ASTM BODY,ASTM TRIM,ASTM STRAINER,ASTM

ELEMENT,FLOAT,BALL,OTHER STANDARD EQUIVALENT MAY BE SHOWN

6000000196

213Static Equipment

(Fittings)FLANGE; NON-METALIC BLIND

FLANGE BLIND; EPOXY, POLYESTER, VINYL ESTER RESIN,01-SAMSS-034,SAES-S-040

SAES-S-0706000000225

214Static Equipment

(Fittings)

FLANGE: BLIND, EPOXY RESIN, 01-

SAMSS-034FLANGE BLIND; EPOXY RESIN,01-SAMSS-034

6000011660

215Static Equipment

(Fittings)

FITTING; PIPE; CUNI;ALL

TYPES;EEMUA 146

FITTING: PIPE; CUNI PIPE FITTINGS, ALL TYPES, EEMUA 146 INCLUDING ELBOWS,

TEES, REDUCERS, CAPS, COUPLING, BRANCH CONNECTION, BW OR SW OR

THREADED AS PER EEMUA 146. NON-HYDRCARBON UTILITY.

6000014202

216Static Equipment

(Heat Transfer )

HOSE: CORRUGATED METALLIC

ASSEMBLIESHOSE; ISO 10380,CORRUGATED METALLIC HOSE ASSEMBLIES

6000015210

217Static Equipment

(Valves)

VALVE; GATE; PARALLEL SLIDE; 2

INCH AND

VALVE GATE; PARALLEL SLIDE TYPE,SIZE NPS 2 AND UP,ASME CL 150 AND UP

SUPPLY,FLANGED OR BUTTWELD END CONN,STEEL BODY,04-SAMSS-035,04-

SAMSS-048 04-SAMSS-001,WITH OR WITHOUT ACTUATOR

6000000286

218Static Equipment

(Valves)

VALVE; GATE; THRU

CONDUIT;EXPANDING GATE

VALVE GATE THRU CONDUIT; SIZE NPS 2 AND UP,ASME CL 150 AND UP

SUPPLY,FLANGED OR BUTTWELD END CONN,STYLE EXPANDING GATE,STEEL

BODY,04-SAMSS-050,WITH OR WITHOUT ACTUATOR

6000000290

219Static Equipment

(Valves)

VALVE; GATE; UP TO 12 INCH;

NON-FERROUS;

VALVE GATE; SIZE UP TO NPS 12,ANY RATING, ALLENDS SUPPLY,NON-FERROUS,

(BRONZE/ALUMINUM-BRONZE BODY,04-SAMSS-035,04-SAMSS-048 04-SAMSS-

001,WITH OR WITHOUT ACTUATOR

6000000292

220Static Equipment

(Valves)

VALVE; PLUG; EXPANDING;04-

SAMSS-041;

VALVE PLUG; EXPANDING TYPE,SIZE ANY SIZE,ANY PRESSURE RATING

SUPPLY,STEEL BODY,04-SAMSS-041,04-SAMSS-035 04-SAMSS-048,WITH OR

WITHOUT ACTUATOR

6000000307

221Static Equipment

(Valves)VALVE; PLUG; NON-LUBRICATED

VALVE PLUG; NON-LUBRICATED TYPE,SIZE ANY SIZE,ANY PRESSURE RATING

SUPPLY,STEEL OR DUCTILE IRON BODY,04-SAMSS-035,04-SAMSS-048 API

599,ASME B16.34,WITH OR WITHOUT ACTUATOR

6000000309





9COM/9CAT

222Static Equipment

(Valves)VALVE: CHOKE; API 6A, 10000 PSI

VALVE CHOKE; NEEDLE AND SEAT TYPE,1-13/16 IN & UP BODY,PR 10000

PSI,HUBBED, FLANGED OR BUTTWELD END CONN,MR API 6A,STEEL BODY,04-

SAMSS-049,04-SAMSS-035 04,WITH OR WITHOUT ACTUATOR

6000000313

223Static Equipment

(Valves)

VALVE; CHECK; 2 THRU 24 IN;

SOFT SEAT

VALVE CHECK; SIZE 2 THRU 24 INCH,ANSI CL 150 AND UP SUPPLY,STEEL

BODY,SWING,REGULAR,FLANGED OR BUTTWELD END CONN,METAL OR SOFT

SEAT,04-SAMSS-005,04-SAMSS-035

6000000326

224Static Equipment

(Valves)VALVE: HYDRANT PIT, JET FUEL

VALVE; HYDRANT PIT TYPE,SIZE ALL SIZES,ALL RATINGS SUPPLY,FOR JET FUEL,

CONTACT CSD FOR DETAILS.6000004665

225Static Equipment

(Valves)

VALVE; GATE, GLOBE&CHECK,

CRYOGENICVALVE GATE; GLOBE&CHECK, CRYOGENIC TYPE,SIZE ANY SIZE,ANY RATING

SUPPLY,04-SAMSS-035,04-SAMSS-048,GLOBE,CHECK CRYOGENIC6000013010

226Static Equipment

(Valves)

VALVE; PLUG; Full Opening

LUBRICATED

VALVE PLUG; LUBRICATED TYPE,FULL BORE BORE,STEEL BODY,04-SAMSS-035,04-

SAMSS-048 API 599 AND ASME B16,FULL BORE TO ALLOW FOR THE PASSAGE OF

SCRAPERS WITH OR WITHOUT ACTUATOR

6000013743

227Static Equipment

(Valves)

VALVE, BALL; HIGH

PERFORMANCE STEEL

VALVE BALL; ANSI CL 150 AND UP SUPPLY,FLANGED OR BUTTWELD END

CONN,STYLE SPLIT BODY,SEAT SUPPORTED SUPPORT,METAL SEATED SEAT,04-

SAMSS-035,04-SAMSS-048 04-SAMSS-051,HIGH PERFORMANCE STEEL AND ZERO

LEAKAGE, WITH OR WITHOUT ACTUATOR

6000013744

228Static Equipment

(Valves)VALVE;BUTTERFLY; TRICENTRIC

VALVE BUTTERFLY; HIGH PERFORMANCE TYPE,TRICENTRIC,CL 150 AND UP

SUPPLY,FLANGED OR BUTTWELD END CONN,04-SAMSS-035,04-SAMSS-048 API

6D,API 609,HIGH PERFORMANCE, ZERO LEAKAGE, WITH OR WITHOUT ACTUATOR6000013745

229Static Equipment

(Valves)

VALVE: BLIND; STEEL; FULL BORE;

NPS

VALVE; BLIND TYPE,SIZE NPS 2 THRU 24,ASME CLASS 150 AND UP

SUPPLY,FLANGED END CONN,STEEL BODY,ASME SCE VII DIV 1, ASME B31.3,FULL

BORE, FOR NON- HYDROCARBON SEVICES

6000014054

230Static Equipment

(Valves)

VALVE: BALL;1-13/16 IN AND UP;

API 10000

VALVE BALL; SIZE 1-13/16 IN AND UP,API 10000 SUPPLY,FLANGED OR BUTTWELD

END CONN,STYLE SPLIT BODY,TRUNNION SUPPORT,METAL SEAT,04-SAMSS-049 6000014982

231Static Equipment

(Vessels)

TANK; FIBER GLASS; 32-SAMSS-

002TANK; FIBER GLASS,32-SAMSS-002

6000002481

232Static Equipment

(Process Vessels)

SKID; NITROGEN GENERATION;

MEMBRANE TYPESKID; MEMBRANE TYPE,32-SAMSS-038,NITROGEN GENERATION

6000002461

233Static Equipment

(Process Vessels)

SKID; DRYER, INSTRUMENT AIR &

COMPRESSEDSKID; DRYER TYPE,32-SAMSS-038,INSTURMENT AIR & COMPRESSED GAS

6000002879

234Static Equipment

(Tanks)

TANK;ROOF;FLOATING;INTERNAL

;32-SAMSS-005TANK; ROOF TYPE,32-SAMSS-005,ATING ERNAL

6000011664

235Static Equipment

(Tubes)

DRIER, LIQUID, GAS AND

COMPRESSED AIRDRIER; LIQUID,GAS AND COMPRESSED AIR,LIQUID, GAS AND COMPRESSED AIR

6000002414





9COM/9CAT

236Static Equipment

(Tubes)

TUBE BUNDLE; TWISTED TUBE

TYPE, HEATTUBE; 32-SAMSS-007

6000011344

237Static Equipment

(HVAC)

AIR HANDLING UNIT; AHU;

CHILLED WATER OR

AIR HANDLING UNIT; AHU TYPE,CHILLED WATER OR DIRECT

EXPANSION,ONSHORE ALL SIZES AND OFFSHORE LESS THAN 10 TONS

COOLING,MANUFACTURER STANDARD

6000001821

238Static Equipment

(HVAC)

AIR CONDITIONING UNIT; SELF

CONTAINED; OAIR CONDITIONING UNIT; SELF CONTAINED TYPE,(PACKAGED UNIT) CERTIFIED TO

AHRI 340 AND UL 1995 STD6000001822

239Static Equipment

(HVAC)

AIR CONDITIONING UNIT;

PACKAGED UNIT TRAAIR CONDITIONING UNIT; PACKAGED UNIT TRAILERIZED TYPE,AIR COOLED,R-22

OR R-134A,MANUFACTURER STANDARD6000001823

240Static Equipment

(HVAC)

HVAC; THROUGH THE WALL;

WINDOW UNITAIR CONDITIONING UNIT; WINDOW TYPE,R-22 AND R-134A,AHRI-210/240 UL-

484,USE 9COM 6000001826 INSTEAD.6000001825

241Static Equipment

(HVAC)

A/C Unit,mini-split,DE below 5.5

Tons

AIR CONDITIONING UNIT; AIR CONDITIONING UNIT SPLIT TYPE, LESS THAN 5.5

TON COOLING TONNAGE, DIRECT EXPANSION TYPE,AHRI 210/240,UL-1995 6000001826

242Static Equipment

(HVAC)

CONDENSING UNIT; AIR COOLED;

ONSHORE ALLCONDENSING UNIT AIR COOLED; ONSHORE ALL SIZES AND OFFSHORE LESS THAN

10 TONS COOLING,MANUFACTURER STANDRADRS6000001831

243Static Equipment

(HVAC)

CONTROLLER; PROGRAMMABLE

LOGIC; ENERGY M

CONTROLLER PROGRAMMABLE LOGIC; ENERGY MANAGEMENT SYSTEM:

BUILDING 6000001838

244Static Equipment

(HVAC)

A/C UNIT;SPLIT;DIRECT EXP,5.5

TO 63 TONS

AIR CONDITIONING UNIT; AIR CONDITIONING UNIT SPLIT UNIT DIRECT

EXPANSION TYPE,SIZES 5.5 TO 63 COOLING TONNAGE COOLING,AHRI

340/360,UL1995

6000001862

245Static Equipment

(HVAC)

AIR CONDITIONING UNIT;

AIRCONDIONING AND

AIR CONDITIONING UNIT; AIRCONDIONING AND PROCESS REFRIGERATION

SYSTEMS TYPE,ONSHORE ALL SIZES, OFFSHORE LESS THAN 10 TONS. COOLING,AB

REFRIGERATION SYSTEMS,EXPLOSION PROOF

6000001881

246Static Equipment

(HVAC)

CHILLER: HVAC/REFRIG, PACKGD

RECIPROCTG,CHILLER; HVAC/REFRIGERATION TYPE,PACKAGED RECIPROCATING, AIR COOLED,

FOR NON-PROCESS APPLICATIONS6000001884

247Static Equipment

(HVAC)AIR CONDITIONING UNIT; SPLIT

AIR CONDITIONING UNIT; SPLIT TYPE,DIRECT EXPANSION,R-22 OR R-

134A,PRECISION COOLING FOR CONTROL, COMMUNICATION, AND DATA

PROCESSING

6000013333

248Static Equipment

(HVAC)

AIR VOLUME BOX; VAR OR

CONSTBOX; AIR VOLUME, VARIABLE OR CONSTANT TYPE

6000013335

249Static Equipment

(HVAC)

CHILLER: ABSORPTION; WATER

COOLED

CHILLER; ABSORPTION WATER COOLED DIRECT FIRED OR STEAM TYPE,AHRI

560,FOR HVAC APPLICATION. ABSORPTION WATER CHILLING AND WATER

HEATING PACKAGES

6000012733

250Rotating Equipment

(Pump)

TURBINE, HYDRAULIC RECOVERY,

API STDTURBINE; HYDRAULIC TYPE,31-SAMSS-004,POWER RECOVERY

6000014644





9COM/9CAT


(Pump)

DEVICE:HYDRAULIC POWER

RECOVERY, MFR STDTURBINE; HYDRAULIC TYPE,MFR STANDARD,POWER RECOVERY

6000014646


(Compressor)

FILTER: COMPLETE UNIT; SELF-

CLEANING

FILTER COMPLETE UNIT; SELF-CLEANING AIR FILTRATION SYSTEM, PULSE TYPE

TYPE,FOR FOR 31-SAMSS-006 AIR CENTRIFUGAL COMPRESSORS,FILTER ELEMENTS

TO COMPLY WITH 32-SAMSS-016

6000013953


(Power Transmission)

COUPLING: VARIABLE SPEED,

HYDRAULIC

COUPLING SHAFT; 13-SAMSS-001,API 613,FOR ROTATING EQUIPMENT, VARIABLE

SPEED HYDRAULIC FLUID TYPE, WITH OR WITHOUT GEAR, WHEN GEAR ROTORS

ARE USED, THE GEARS SHALL COMPLY TO 13-SAMSS-001/API 613.6000000722


(Compressor)

COMPRESSOR; PROCESS; SCREW;

DRYCOMPRESSOR PROCESS; SCREW TYPE,API-619,DRY, GAS APPLICATIONS

6000002339


(Engine & Maint Eqpt)ENGINE; DIESEL; INDUSTRIAL

ENGINE DIESEL; INDUSTRIAL TYPE,50 KW (67 HP ) OR GREATER BHP,30-SAMSS-

001 6000002198


(Turbine, Gas)

TURBINE: WIND, FOR POWER

GENERATORTURBINE; WIND TYPE,IEC 61400,FOR POWER GENERATOR

6000015090


(Compressor)

PUMP; VACUUM; API 681, HIGH

POWERPUMP; VACUUM TYPE,API 681,HIGH POWER, LIQUID RING VACUUM PUMPS OR

COMPRESSORS6000002365


(Compressor)

EXPANDER: TURBO, FOR

CRYOGENIC APPLICATIEXPANDER; TURBO TYPE,API-617,7 EDITION,FOR CRYOGENIC APPLICATIONS IN

GAS REFRIGERATION AND AIR SEPARATION SERVICES6000010962


(Turbine, Gas)

FILTER; ELEMENT; COMBUSTION

GAS TURBINE;FILTER ELEMENT; FOR COMBUSTION GAS TURBINE,32-SAMSS-008,AIR INLET,

FINAL STAGE6000002417

260 Rotating EquipmentENGINE: DIESEL, FIRE WATER

PUMP DRIVER

ENGINE DIESEL; FIRE WATER PUMP DRIVER (PER UL 1247 OR FM 1333)

TYPE,EMERGENCY/STANDBY SERVICE CYCLE,PER UL 1247 OR FM1333 COOLED,30-

SAMSS-001,UL 1247,FM 1333,INSPECTION FORM 175-300100

6000016250


(Compressor)

EXPANDER: TURBO, FOR

CRYOGENIC APPLICATIEXPANDER; TURBO TYPE,API-617,7 EDITION,FOR CRYOGENIC APPLICATIONS IN

GAS REFRIGERATION AND AIR SEPARATION SERVICES6000010962


(Turbine, Gas)TURBINE; HOT GAS EXPANSION;

TURBINE; HOT GAS EXPANSION TYPE,FOR DRIVING GAS COMPRESSOR OR

GENERATOR6000002498


(Compressor)COMPRESSOR; RECIPROCATING;

COMPRESSOR; RECIPROCATING TYPE,FOR PLANT & INSTRUMENT AIR6000002246


(Compressor)

COMPRESSOR; PROCESS; SCREW;

DRYCOMPRESSOR PROCESS; SCREW TYPE,API-619,DRY, GAS APPLICATIONS

6000002339


(Compressor)

COMPRESSOR:PROCESS;CENTRIF

UGAL;SEAL-LESSCOMPRESSOR PROCESS; CENTRIFUGAL TYPE,31-SAMSS-001,API-617,SEAL-LESS,

GAS APPLICATIONS6000014055


(Pump)PUMP: ROTARY, GEAR, API 676

PUMP ROTARY; GEAR TYPE,API-6766000002300





9COM/9CAT


(Pump)PUMP: ROTARY, SCREW, API 676

PUMP ROTARY; SCREW TYPE,API-6766000002303


(Pump)PUMP: ROTARY, VANE, API 676

PUMP ROTARY; VANE TYPE,API-6766000002304


(Pump)

PUMP; CENTRIFUGAL; SELF-

PRIMING; MFR STDPUMP CENTRIFUGAL; SELF-PRIMING TYPE

6000002342


(Pump)

PUMP; CENTRIFUGAL;

FIREWATER;HORIZONTAL;PUMP CENTRIFUGAL; FIREWATER TYPE,HORIZONTAL MTG,NFPA 20,UL OR FM

APPROVED6000002355


(Pump)

PUMP: RECIPROCATING, 31-

SAMSS-009PUMP RECIPROCATING; POSITIVE DISPLACEMENT, CONTROLLED VOLUME

TYPE,31-SAMSS-0096000002361


(Pump)

PUMP; CENTRIFUGAL; MAGNETIC

DRIVE;HORIZOPUMP CENTRIFUGAL; MAGNETIC DRIVE TYPE,HORIZONTAL MTG,ASME B73.3M /

ISO157836000002366


(Pump)

PUMP;

CENTRIFUGAL;VERTICAL;MOLTO

N SULFUR

PUMP CENTRIFUGAL; VERTICAL TYPE,MFR STD DESIGN +SAES-G-005,MOLTEN

SULFUR, SUMP 6000002371


(Pump)

PUMP, CENTRIFUGAL,

HORIZONTAL, MOLTEN SUPUMP CENTRIFUGAL; HORIZONTAL TYPE,MFR STD DESIGN +SAES-G-005,MOLTEN

SULFHUR6000008842


(Pump)

PUMP: MULTIPHASE, ROTARY,

API 676PUMP; MULTIPHASE, ROTARY, SCREW OR PROGRESSIVE TYPE,API 676

6000010365


(Pump)

PUMP: ROTARY, SCREW, API 676,

ASPHALTPUMP ROTARY; SCREW TYPE,API 676,ASPHALT SERVICE

6000012249

277 Rotating EquipmentPUMP; ROTARY; PROGRESSIVE

CAVITY;PUMP ROTARY; PROGRESSIVE CAVITY TYPE,API 676

6000002363


(Pump)

PUMP: CENTRIFUGAL; SEALLESS;

VERTICALPUMP CENTRIFUGAL; SEALLESS TYPE,VERTICAL MTG,MFR STD

6000014690

279 ElectricalPOLE; LINE; POWER

DISTRIBUTION; STEEL;

POLE LINE; POWER DISTRIBUTION TYPE,14-17 METERS LG,OCTAGONAL SHAPE

SHAPE,GALVANIZED STEEL,14-SAMSS-603,SINGLE PIECES 14-17 METERS IN

LENGTH, LONGER THAN 14 METERS MAY BE MANUFACTURED IN TWO PIECES,

SHALL BE PRE-DRILLED AND SUPPLIED COMPLETE WITH POLE TOP CAP AND BASE

PLATE.

6000000771

280

Electrical

(Protective & Control

Electrical Devices )

CABLEBUS 16-SAMSS-520

BUS; CABLE,16-SAMSS-520

6000000929

281 ElectricalPANELBOARD,LOW VOLTAGE,

EXPLOSIONPROOFPANELBOARD ELECTRICAL; LOW VOLTAGE, EXPLOSIONPROOF TYPE,16-SAMSS-

5186000000897

282Electrical

(Switchgear)BUS; ISOLATED PHASE BUS DUCT

BUS; 16-SAMSS-523,ISOLATED PHASE BUS DUCT6000015923





9COM/9CAT

283Electrical

(Switchgear)

SWITCHGEAR; SF6 GAS

INSULATED, 380 KVSWITCHGEAR; SF6 GAS INSULATED TYPE,380 KV,SEC 32-TMSS-02

6000016000

284Electrical

(HV Cable)CABLE; POWER, 380 KV,

CABLE ELECTRICAL HIGH VOLTAGE; 380 KV SUPPLY,XLPE TYPE,SEC 11-TMSS-026000016001

285Electrical

(Solar Energy)

INVERTER, SOLAR POWER,

PHOTOVOLTAICINVERTER; PHOTOVOLTAIC SOLAR TYPE,AA GRID CONNECTION

6000014451

286

Electrical

(Cathodic Protection -

Above Grade

Equipment)

CABLE;ELECTRICAL, CP,

OFFSHORE ANODE

CABLE ELECTRICAL; ORED HODIC PROTECTION OFFSHORE TYPE,17-SAMSS-

017,ARMORED6000000957

287Electrical

(Switchgear)

SWITCHGEAR; LV CONTROLGEAR,

FIREWATER PU

SWITCHGEAR; CONTROLGEAR,FIREWATER PUMP TYPE,UL-218,LOW

VOLTAGE,OUTDOOR 6000000919

288Electrical

(Switchgear)

SWITCHGEAR; HV

CONTROLGEAR, FIREWATER PU

SWITCHGEAR; CONTROLGEAR,FIREWATER PUMP TYPE,UL-218,HIGH

VOLTAGE,OUTDOOR 6000000920

289Electrical

(Cable Support)

POLE LINE; POWER

TRANSMISSION, 69 KVPOLE LINE; POWER DISTRIBUTION TYPE,17 METERS AND UP LG,OCTAGONAL

SHAPE SHAPE,GALVANIZED STEEL,SEC6000014870

290

Electrical


Above Grade

Equipment)

POWER

SUPPLY;ELECTRICAL;SOLAR,CP

POWER SUPPLY ELECTRICAL; HODIC PROTECTION POWER PLY ELECTRICAL SOLAR

POWER TYPE,17-SAMSS-0126000001011

291

Electrical


Below Grade or

Immersed Equip.)

ANODE;GALVANIC,HIGH

TEMPERATURE ZINC,CP

ANODE GALVANIC; HIGH TEMPERATURE ZINC,17-SAMSS-006,CATHODIC

PROTECTION6000015510

292

Electrical


Above Grade

Equipment)

CABLE; CP, FOR ONSHORE

ANODE

CABLE ELECTRICAL; STRANDED CONDUCTO,CATHODIC PROTECTION TYPE,FOR

FOR ONSHORE ANODE CONNECTION,,17-SAMSS-0176000000938

293

Electrical


Below Grade or

Immersed Equip.)

ANODE

GALVANIC;MAGNESIUM,WITHO

UT LEAD,CP

ANODE GALVANIC; MAGNESIUM,17-SAMSS-006,CATHODIC PROTECTION

WITHOUT LEADS6000001040





9COM/9CAT

294Electrical

(Cathodic Protection)

CABLE;

ELECTRICAL;OFFSHORE/ONSHOR

E,CP

CABLE ELECTRICAL; CATHODIC PROTECTION TYPE,STRANDED, NEGATIVE &

POSITIVE TYPE,SINGLE INSULATED INSUL LV,HMWPE INSUL,FOR

OFFSHORE/ONSHORE,17-SAMSS-017

6000001045

295 ElectricalSTATIC SWITCH, UPS

APPLICATIONSSWITCH; UPS APPLICATIONS,SOLID STATE STATIC TRANSFER TYPE,17-SAMSS-

516,EXTERNAL STAND-ALONE6000001058

296

Electrical


Below Grade or

Immersed Equip.)

BOX: JUNCTION, FOR U/G

ANODE BED,CP

BOX ELECTRICAL; CATHODIC PROTECTION UNDERGROUND ANODE BED JUNCTION

BOX TYPE,SIZE 2500CM3 (MINIMUM),CYLINDRICAL OR BOX SHAPE,12X16MM2

AND 2X70MM2 CONNECTN,12+2 TERMINAL SCREW LUG COONECTN,FOR

WEATHERPROOF (DIRECT BURIAL),NON-CLASSIFIED,NON-METALLIC SUITABLE

FOR DIRECT BURIAL AND IMMERSION SERVICE IN AMBIENT TEMPERATURE

SEAWATER,OPTIONAL FINISH,OPTIONAL THK,17-SAMSS-008 'JUNCTION BOX FOR

CATHODIC PROTECTION',MEMBRANE GLANDS & FILLER/ SEALING COMPOUND

SUITABLE FOR DIRECT BURIAL AND IMMERSION SERVICE IN AMBIENT

TEMPERATURE SEAWATE

6000012080

297

Electrical


Below Grade or

Immersed Equip.)

ANODE: GALVANIC,

MAGNESIUM,CP

ANODE GALVANIC; MAGNESIUM,17-SAMSS-006,CATHODIC PROTECTION LARGE

SIZE CYLINDRICAL, FOR OFFSHORE APPLICATION6000012790

298

Electrical

(Transformer, power

& distribution)

UNIT; MOBILE SUBSTATION

UNIT; MOBILE SUBSTATION TYPE,60044,IEC60376, 60076,IEC60255,

60332,IEC60146, 60478,IEC60529, 60518,IEC60099, 62271,IEC60137,ALL

COMPONENTS DETAILS ARE BASED ON AND INSPECTED TO IEC STANDARDS.

OPERATING AT 230 KV, 115KV, OR 69KV CONSISTING OF: EIGHT (8) AXLES

SEMITRAILER , METAL OXIDE SURGE ARRESTERS, SWITCHGEAR, DISCONNECT

SWITCHES, CURRENT TRANSFORMERS AND AUXILIARIES, CAPACITIVE VOLTAGE

TRANSFORMER , POWER TRANSFORMER , AUXILIARY TRANSFORMER,

CONDITIONED CONTAINER, PROTECTION/ CONTROL PANELS, BATTERIES

EQUIPMENT, SCADA CAPABILITIES. ((COMPONENTS DETAILS AND REQUIREMENTS

SHOULD BE DETERMINED IN THE PURCHASE REQUEST.

6000015902

299

Instrumentation and

IT

(Valve, Control)

VALVE: BACKFLOW PREVENTER;

FOR INSTRUMEN

VALVE; BACKFLOW PREVENTER INSTRUMENT INSTALLATIONS6000002680

300

Instrumentation and

IT

(Controller: HYD; ESD,

SSV & SSSV)

MONITOR; WELL HEAD ESD;;

MONITORING & CO

MONITOR; WELL HEAD ESD, TYPE,WELL HEAD ESD,MONITORING & CONTROL

SYSTEMS6000002721





9COM/9CAT

301

Instrumentation and

IT

(DCS, ESD & Plant

Control Systems)

ESD; RELAYS

RELAY PROTECTION ELECTRO-MECHANICAL; 34-SAMSS-622,EMERGENCY

SHUTDOWN SYSTEM RELAY BASED USED TO SAFELY SHUTDOWN A PROCESS IN

CASE OF PROCESS DEVIATING TO HAZARDOUS OPERATING CONDITIONS.6000002724

302

Instrumentation and

IT

(DCS, ESD & Plant

Control Systems)

ESD; ELECTRONIC; SOLID STATE

RELAY PROTECTION SOLID STATE; EMERGENCY SHUTDOWN SYSTEM ACTION,34-

SAMSS-621,SOLID STATE ELECTRONICS BASED USED TO SAFELY SHUTDOWN A

PROCESS IN CASE OF PROCESS DEVIATING TO HAZARDOUS OPERATING

CONDITIONS.

6000002725

303

Instrumentation and

IT

(Monitoring Eqpt

(Vibration, etc))

MONITOR; FLAME MONITORING

SYSTEM

MONITOR; IGNITERS AND BURNERS USED E MONITORING SYSTEM D IN FIRED

EQUIPMENT. TYPE,34-SAMSS-6176000002732

304

Instrumentation and

IT

(Flow

Instrumentation)

FLOWMETER; THERMAL;

FLOWMETER; THERMAL TYPE,THERMAL

6000002736

305Instrumentation and

ITNOZZLE; FLOW;

NOZZLE; FLOW TYPE6000002740

306

Instrumentation and

IT

(Flow

Instrumentation)

FLOWMETER:FOR REDUCE

PIPING REQUIREMENTS

FLOWMETER; 34-SAMSS-010,SPECIALTY FLOWMETER FOR REDUCING PIPING

REQUIREMENTS6000002742

307

Instrumentation and

IT

(Gauges, Indicators,

Recorders)

INDICATOR; SIGHT FLOW; GLASS;

INDICATOR SIGHT FLOW; GLASS

6000002744

308

Instrumentation and

IT

(Instrumentation)

MONITOR; GAS; HYDROGEN

SULFIDE;

MONITOR GAS; HYDROGEN SULFIDE,34-SAMSS-5146000002786

309

Instrumentation and

IT

(Analyzers,

Instrument)

MONITOR; GAS; COMBUSTIBLE;

OPEN PATH TYP

INDICATOR; PRESSURE TYPE

6000002787


ITRECORDER; MULTI-POINT;

RECORDER; MULTI-POINT TYPE6000002807





9COM/9CAT

311

Instrumentation and

IT

(Gauges, Indicators,

Recorders)

SWITCH; TARGET

SWITCH FLOW; FLOW TYPE, INSTRUMENTATION

6000002831

312

Instrumentation and

IT

(Valves,

Instrumentation)

VALVE; CHECK; LEVEL GAUGE

GLASS; FLOW SH

VALVE CHECK; LEVEL GAUGE GLASS, FLOW FLOW SHUT-OFF SPRING,LEVEL

GAUGE GLASS, FLOW SHUT-OFF6000002854

313

Instrumentation and

IT

(Instrumentation)

VALVE; AUTOMATIC

RECIRCULATION;

VALVE; AUTOMATIC RECIRCULATION TYPE,34-SAMSS-7116000002856

314

Instrumentation and

IT

(Instrumentation)

VALVE; RELIEF; SURGE GAS

LOADED

VALVE RELIEF; SAES-J-605,SURGE GAS LOADED6000002896

315

Instrumentation and

IT

(Instrumentation)

ANALYZER; GAS

CHROMATOGRAPH; Sheltered

ANALYZER; GAS CHROMATOGRAPH TYPE,34-SAMSS-511,PROCESS GAS OR LIQUID6000002914

316

Instrumentation and

IT

(MULTIPHASE FM)

FLOWMETER; MULTIPHASE;FLOWMETER; MULTIPHASE TYPE,34-SAMSS-001

6000002917

317

Instrumentation and

IT

(DCS, ESD & Plant

Control Systems)

CONTROLLER;

COMPRESSOR/TURBOMACHINER

Y;

CONTROLLER; COMPRESSOR/TURBOMACHINERY

TYPE,COMPRESSOR/TURBOMACHINERY,INEGRATED SYSTEMS6000009392


IT

CUSTODY METER, TURBINE,

LIQUIDFLOWMETER TURBINE; CUSTODY TRANSFER LIQUID TYPE,34-SAMSS-117

6000009831

319

Instrumentation and

IT

(Custody Transfer

Measurement

Equipment)

CUSTODY METER, POS DISPL ,

LIQUID

FLOWMETER POSITIVE DISPLACEMENT; CUSTODY TRANSFER LIQUID TYPE,34-

SAMSS-1186000009832

320

Instrumentation and

IT

(Custody

Measurement)

CUSTODY METER, CORIOLIS,

LIQUID

FLOWMETER CORIOLIS; CUSTODY TRANSFER LIQUID TYPE,CUSTODY TRANSFER

LIQUID6000009833





9COM/9CAT

321

Instrumentation and

IT

(Custody

Measurement)

CUSTODY METER, CORIOLIS GAS

FLOWMETER CORIOLIS; CUSTODY TRANSFER GAS TYPE

6000009883

322

Instrumentation and

IT

(Custody Transfer

Measurement

Equipment)

ORIFICE PLATE FOR CUSTODY

TRANSFER

ORIFICE PLATE; CUSTODY TRANSFER GAS TYPE,34-SAMSS-112

6000009887

323

Instrumentation and

IT

(Custody

Measurement)

CUSTODY CHROMATOGRAPH,

GAS OR LIQUID

CHROMATOGRAPH PROCESS; FOR CUSTODY TRANSFER CHROMOTOGRAPHY,34-

SAMSS-5116000009898

324

Instrumentation and

IT

(Custody

Measurement)

CUSTODY FLOW COMPUTER,

LIQUID, PANEL-MNT

COMPUTER FLOW; CUSTODY TRANSFER LIQUID TYPE,CUSTODY TRANSFER LIQUID

6000009899

325

Instrumentation and

IT

(Custody

Measurement)


GAS, PANEL-MNTD

COMPUTER FLOW; CUSTODY TRANSFER GAS TYPE,CUSTODY TRANSFER GAS

6000009900

326

Instrumentation and

IT

(Custody

Measurement)


LIQUID, FIELD-MNT

COMPUTER FLOW; CUSTODY TRANSFER LIQUID TYPE,CUSTODY TRANSFER LIQUID

6000009901

327

Instrumentation and

IT

(Custody

Measurement)


GAS, FIELD MOUNTD

COMPUTER FLOW; CUSTODY TRANSFER GAS TYPE,CUSTODY TRANSFER GAS

6000009902


IT

CUSTODY PRESET CONTROLLER,

TRUCK LOADINGCOMPUTER FLOW; CUSTODY PRESET CONTROLLER TYPE,34-SAMSS-847,FOR

TRUCK LOADING SYSTEMS6000009906


IT

CUSTODY PRESET CONTROLLER

TRUCK UNLOADNGCOMPUTER FLOW; CUSTODY PRESET CONTROLLER TYPE,34-SAMSS-847,FOR

TRUCK UNLOADING SYSTEMS6000009907


ITCustody Tank Gauge, Radar

GAUGE TANK LEVEL; 34-SAMSS-321,CUSTODY TANK GAUGE, RADAR TYPE6000009908


IT

Custody Tank Management

System, RadarCOMPUTER; FOR CUSTODY TRANSFER,34-SAMSS-321,CUSTODY TANK

MANAGEMENT SYSTEM, RADAR6000009909





9COM/9CAT

332

Instrumentation and

IT

(Custody Transfer

Measurement

Equipment)

CUSTODY WEIGH SCALE

SCALE WEIGH; CUSTODY TRANSFER TYPE,CUSTODY TRANSFER

6000009910

333

Instrumentation and

IT

(Communication,

Radio Equipment)

TETRA HANDHELD RADIO&DEVIS

FOR CLASSIFID

DEVICE; TETRA HANDHELD RADIO AND DEVICES FOR CLASSIFIED AREA

TYPE,TETRA HANDHELD RADIOS & TETRA DEVICES USED IN HAZARDOUS OR

CLASSIFIED AREAS SUCH AS OIL & GAS PLANTS, REFINERIES, PIPELINES, ETC6000010102

334

Instrumentation and

IT

(Multivariable

Instrumentation)

POWER SUPPLIES,FOUNDATION

FIELDBUS (FF)

POWER SUPPLY; FOUNDATION FIELDBUS (FF) TYPE,FOR USE WITH FOUNDATION

FIELD-BUS INSTRUMENTS ONLY6000010825

335

Instrumentation and

IT

(Valves, Relief/Safety

& Busting Disks)

VALVE, RELIEF; SURGE PILOT

OPERATED

VALVE RELIEF; SAES-J-605,SURGE PILOT OPERATED TYPE.FACTORYTESTING IS

REQUIRED FOR COMPLEX RATE-OF-RISE OR MODULATINGVALVES.6000012803

336

Instrumentation and

IT

(Temperature

Instrumentation)

Multiplexer; Foundation Fieldbus

(FF)

MULTIPLEXER; FOUNDATION FIELDBUS (FF) TYPE,SAES-J-904,AA MULTI-INPUT

TEMPERATURE6000013000

337

Instrumentation and

IT

(Monitoring Eqpt

(Vibration, etc))

CABINETS FOR VIBRATION

MONITORING SYS

CABINET; SAMSS-820 SAMSS-820,CABINETS FOR VIBRATION CABINETS FOR

VIBRATION MONITORING SYSTEMS (VMS MONITORING SYSTEMS (VMS

INTEGRATION) INTEGRATION) MONITOR; SAMSS-820 SAMSS-820,CABINETS FOR

VIBRATION CABINETS FOR VIBRATION MONITORING SYSTEMS (VMS

MONITORING SYSTEMS (VMS INTEGRATION) INTEGRATION)

6000013781

338

Instrumentation and

IT

(Custody

Measurement)

CUSTODY TANK GAUGING

SYSTEM, RADAR

GAUGE TANK LEVEL; SAES-Y-301,34-SAMSS-321

6000014614

339

Instrumentation and

IT

(Communications)

CABLE: SUBMARINE FIBER OPTICCABLE; SUBMARINE FIBER OPTIC CABLE TYPE,STAND-ALONE SUBMARINE FIBER

OPTICAL CABLE,18-SAMSS-006 6000014631

340

Instrumentation and

IT

(Instrumentation)

ANALYZERS,GAS

CHROMATOGRAPH; FIELD

MOUNT

ANALYZER; GAS CHROMATOGRAPH TYPE,34-SAMSS-511,IR343200,FIELD

MOUNTED 6000014780





9COM/9CAT

341

Instrumentation and

IT

(DCS, ESD & Plant

Control Systems)

REAL-TIME TRANSIENT MODEL

PLDS

DETECTOR LEAK; RTTM METHODS TYPE,FOR PIPELINE,SAES-Z-003,SYSTEMS USE

MATHEMATICAL MODELS OF THE FLOW WITHIN A PIPELINE TO DETECT THE LEAK6000014890

342

Instrumentation and

IT

(DCS, ESD & Plant

Control Systems)

ACOUSTIC PRESSURE WAVES

PLDS

DETECTOR LEAK; ACOUSTIC PRESSURE WAVES TYPE,FOR PIPELINE,SAES-Z-003,THE

ACOUSTIC PRESSURE WAVE METHOD ANALYSES THE RAREFACTION WAVES

PRODUCED WHEN A LEAK OCCURS.6000014891

343

Instrumentation and

IT

(DCS, ESD & Plant

Control Systems)

BALANCING METHODS PRINCIPLE

PLDS

DETECTOR LEAK; BALANCING METHODS TYPE,FOR PIPELINE,SAES-Z-003,THESE

METHODS BASE ON THE PRINCIPLE OF CONSERVATION OF MASS6000014892


IT

SKID; WELLHEAD HIPS, SELF-

CONTAINEDSKID; WELLHEAD HIPS TYPE,34-SAMSS-628,(HIGH INTEGRITY PRESSURE SYSTEM),

SELF-CONTAINED, WITH ALL RELATED COMPONENTS6000015901

345 Pipe & OCTG COUPLING: OCTG; HIGH NICKEL

COUPLING OCTG; HIGH NICKEL ALLOY STAINLESS STEEL,SEAMLESS,API-5CT,ISO-

13680,GR UNS N08020 OR EQUIVALENT,PREMIUM THREAD END CONN,COLLAPSE

TEST PER API WITH ONE SAMPLE TESTED PER 200 JOINTS OF MOTHER TUBE6000007293

346 Pipe & OCTGCASING: OCTG; HIGH NICKEL;

SEAMLESS

CASING OCTG; HIGH NICKEL ALLOY STAINLESS STEEL,SEAMLESS,API-5CT,ISO-

13680,GR UNS N08028 OR EQUIVALENT,PREMIUM THREAD END CONN,

COLLAPSE TEST PER API WITH ONE SAMPLE TESTED PER 200 JOINTS

6000007303

347 Pipe & OCTG CROSSOVER: OCTG; HIGH NICKEL

CROSSOVER; OCTG, HIGH NICKEL ALLOY STAINLESS STEEL,SEAMLESS

TYPE,PREMIUM THREAD TERMINAL,API-5CT, ISO-13680,COLLAPSE TEST PER API

WITH ONE SAMPLE TESTED PER 200 JOINTS OF MOTHER TUBE, GR UNS N08020

OR EQUIVALENT

6000007305

348 Pipe & OCTGPUP JOINT: CASING OCSG; HIGH

NICKEL

PUP JOINT OCTG; HIGH NICKEL ALLOY STAINLESS STEEL,SEAMLESS,API-5CT,ISO-

13680,GR UNS N08028 OR EQUIVALENT,PREMIUM THREAD END CONN,COLLAPSE

TEST PER API WITH ONE SAMPLE TESTED PER 200 JOINTS OF MOTHER TUBE6000007307

349 Pipe & OCTGTUBING: OCTG; HIGH NICKEL;

SEAMLESS

TUBING OCTG; HIGH NICKEL ALLOY STAINLESS STEEL,SEAMLESS,API-5CT,ISO-

13680,PREMIUM THREAD END CONN,COLLAPSE TEST PER API WITH ONE SAMPLE

TESTED PER 200 JOINTS OF MOTHER TUBE, UNS N08028

6000007350

350 Pipe & OCTGPUP JOINT: TUBING OCTG; HIGH

NICKEL

PUP JOINT OCTG; HIGH NICKEL ALLOY STAINLESS STEEL, TUBING,SEAMLESS,API-

5CT,ISO-13680,GR UNS N08028,PREMIUM THREAD END CONN,COLLAPSE TEST

PER API WITH SAMPLE TESTED PER 200 JOINTS OF MOTHER TUBE,6000007352

351Pipe & OCTG

(OCTG)COLLAR: DRILL; STANDARD

DRILL; SPIRAL/ SLICK TYPE,SIZE "3-1/8"" - 11"" OD",31 FEET LG,AISI 4145 H

MODIFIED,API-76000003831





9COM/9CAT

352 Pipe & OCTGTUBING: OCTG; API GR;

SEAMLESSTUBING OCTG; STEEL,SEAMLESS,API-5C2,API-5B 45-SAMSS-006

6000003877

353Pipe & OCTG

(OCTG)CASING: OCTG; API GR; ERW

CASING OCTG; STEEL,ERW OR SEAMLESS,AA 45-SAMSS-006,API-5L,SIZE 24 IN6000003851

354Pipe & OCTG

(OCTG)CASING: OCTG; API GR; SAW

CASING OCTG; STEEL,SAW,45-SAMSS-006,API-5L,SIZE 26 IN. AND LARGER6000003855

355Pipe & OCTG

(Pipe)

HEADER: PIPE; EXTRUDED OR

REINFORCEDHEADER PIPE; EXRUDED OR REINFORCED BRANCHES,ANY APPLICATION,ANY

APPLICATION6000000060

356Pipe & OCTG

(Pipe)

PIPE: METALLIC, WELD

OVERLAYED PIPEPIPE METALLIC; CARBON STEEL,OVERLAYED WITH CORROSION RESISTANT

ALLOY,01-SAMSS-048, API 5LD6000014017

357Pipe & OCTG

(Pipe)CUNI PIPE, EEMUA 144

PIPE; CUNI, EEMUA 144 TYPE6000014200

358Pipe & OCTG

(Pipe)

PIPE;METALLIC; HFW CLASS C

FOR SOUR GASPIPE METALLIC; ALL SIZE NPS,STEEL,GR B THRU X-65,HFW,API 5L,01-SAMSS-

333,CLASS C,FOR SOUR GAS SERVICE ONSHORE6000000046

359Pipe & OCTG

(Pipe)PIPE: METALLIC, LINED PIPE

PIPE METALLIC; CARBON STEEL,LINED WITH CORROSION RESISTANT ALLOY,01-

SAMSS-048, API 5LD6000014016

360 Pipe & OCTGPIPE; METALLIC; HFW CLASS B

FOR NON SOURPIPE METALLIC; ALL SIZE NPS,STEEL,GR GRADE B THRU X70,HFW,API 5L,01-SAMSS-

333,CLASS B,NON SOUR SERVICE6000000049

361Pipe & OCTG

(Pipe)

Pipe; Nonmetallic, Subsea

flexiblePIPE METALLIC; PA,PE & PVDF,FLEXIBLE PIPE,LINER AND OUTER SHEATHING,API

17J6000000037

362 Pipe & OCTGPIPE & FITTINGS;

THERMOPLASTIC;

PIPE NON-METALLIC; 1300 MM TO 3600 MM NPS,AA STRUCTURED

WALL,THERMOPLASTIC, HDPE, PVC, PP,FOR WATER, GRAVITY,DIN

16961,SEWERAGE, STORM WATER DRAIN, SEAWATER INTAKE AND OUTFALL

6000011205

363Pipe & OCTG

(Pipe)

UMBILICAL SYS, SUBSEA,

OFFSHORE, NONMETA

PIPE NON-METALLIC; 15-SAMSS-503,15-SAMSS-504 ISO 13628,UMBILICALSYSTEM

IS AN INTEGRATED BUNDLE OF TUBES, HOSES, POWER CABLESAND/OR FIBER

OPTICS ENCLOSED WITH AN OUTER RING SPECIALLYDESIGNED FOR THE SUBSEA

ENVIRONMENT TO WHICH IT WILL BE DEPLOYED.

6000014895

364 Pipe & OCTGPIPE; NON-METALLIC; ALL SIZES;

THERMOPLAPIPE NON-METALLIC; ALL SIZES NPS,THERMOPLASTIC, UPVC,ASTM D2665,ASTM

D17856000000031

365 Pipe & OCTG Pipe; Nonmetallic, (RTP) PIPE

PIPE NON-METALLIC; MAXIMUM 8 INCHES NPS,REINFORCED THERMOPLASTIC

(RTP),INTERNAL / EXTERNAL LINING THERMOPLASTIC(PE,PE- RT, PP

PA,PVDF,PREFABRICATED SPOOL ENDS,FOR WATER AND HYDROCARBON

APPLICATIONS MAX TEMP 180 F,API RP 15S FOR FIBER,REINFO 17J FOR STEEL

REINFORCED,ONSHORE / OFFSHORE WATER AND HYDROCARBON APPLICATIONS.

6000000042

366 Pipe & OCTG GRATING; FIBERGLASS GRATING FIBERGLASS; AB 12-SAMSS-021 AND 12-SAMSS-0 6000000631





9COM/9CAT

367Pipe & OCTG

(Pipe)PIPE&FITTINGS;NON-METAL;RTR

PIPE NON-METALLIC; MAXIMUM 30 IN. NPS,PER CALCULATION,REINFORCED

THERMOSETTING RESIN,REINFORCED THERMOSETTING RESIN,FOR WATER (NON-

UTILITY) AND HYDROCARBON APPLICATIONS MAX TEMP 210 F,01-SAMSS-042,API

RP 15HR API RP 15LR,FOR PIPE AND FITTINGS

6000013160

368 Pipe & OCTGGrating; Offshore; Fire

Retardant; Non-M

GRATING; FIRE RETARDANT TYPE,PULTRUDED PHENOLIC RESIN,12-SAMSS-

023,NONMETALLIC FIBER-REINFORCED COMPOSITE PLATFORMS. ASTM E84

RESOLUTION A653 (16) D635 M M D2863. SHORE 94

6000007813

369Pipe & OCTG

(Pipe)

PIPE; NON-METAL; LINED PIPING

SYSTEMS

PIPE NON-METALLIC; UP TO 20 NPS,300 PSIG MAX

SUPPLY,CARBONSTEEL,THERMOPLASTIC LINED PIPING SYSTEMS,FOR CORROSIVE

FLUIDS,ACIDS, ALKALINE,CHEMICAL SOLUTIONS OR OILY DRAINS,01-SAMSS-0256000013900

370 Pipe & OCTGPIPE, NON-METALLIC, ALL SIZES,

FOR WATERPIPE NON-METALLIC; ALL SIZES NPS,POLYPROPYLENE,ASTM F2389,FOR WATER

DISTRBUTION SYSTEMS6000009750

371Pipe & OCTG

(Pipe)

Service: Pre-Engineered

Composite Repair

SERVICE; PRE-ENGINEERED THERMOSET FIBER REINFORCED

COMPOSITETYPE,SAEP-345,ASME-PCC2 ISO 24817,LIMITED TO PIPELINE FOR

WATER,HYDROCARBON, AND CHEMICALS APPLICATIONS. SUITABLE FOR

PIPELINESWITH EXTERNAL CORROSION UP TO 80 PERCENT METAL LOSS. FOR

SABKHAAREA APPLICATIONS, AN EXTERNAL WATER PROTECTION LAYER SHALL

BEADDED ON THE SLEEVE. NOT APPLICABLE FOR FITTINGS SUCH AS ELBOW,TEE,

REDUCER#.ETC. FOR PLANT PIPING, IT SHALL BE UTILIZED AS ATEMPORARY

REPAIR WITH A PRIOR APPROVAL FROM NONMETALLIC SCC.

6000014191

372Pipe & OCTG

(Pipe)

SERVICE: WET -TYPE COMPOSITE

REPAIR EXT.

SERVICE; WET-TYPE THERMOSET COMPOSITE FIBER REINFORCED

OMPOSITE.TYPE,SAEP-345,ASME-PCC2 ISO 24817,USE FOR WATER,

HYDROCARBON,CHEMICALS PLANT PIPING AND PIPELINES. SUITABLE FOR

EXTERNALCORROSION UP TO 80 PERCENT METAL LOSS. FOR PLANT PIPING

ANDFITTINGS, IT SHALL BE UTILIZED AS A TEMPORARY REPAIR WITH APRIOR

APPROVAL FROM NONMETALLIC SCC.

6000014681

373 Pipe & OCTGSERVICE: WET-TYPE; COMPOSITE

REPAIR, INT

SERVICE; WET-TYPE THERMOSET COMPOSITE FIBER REINFORCED TYPE,SAEP-

345,ASME-PCC2 ISO 24817,USE FOR WATER, HYDROCARBON, CHEMICALS PLANT

PIPING AND PIPELINES. SUITABLE FOR INTERNAL CORROSION UP TO 80 PERCENT

METAL LOSS PROVIDED THAT CORROSION SOURCE IS MITIGATED. FOR PLANT

PIPING AND FITTINGS, IT SHALL BE UTILIZED AS A TEMPORARY REPAIR WITH A

PRIOR APPROVAL FROM NONMETALLIC SCC.

6000015710





9COM/9CAT

374 Pipe & OCTGPIPE; NONMETALLIC; CPVC; FOR

FIRE SPRINK

PIPE; PIPE, ANY SIZE TYPE,CHLORINATED POLY VINYL CHLORIDE (CPVC),UL OR

EQUIVALENT CERTIFIED FOR FIRE SPRINKLER SYSTEMS STANDARDS: UL 1887, UL

1821 ASTM D1784, ASTM F442, UL LISTED ADHESIVE, ASTM F493, ASTM F6566000016271


Date post:	30-May-2018
Category:	Documents
Upload:	dangkhue
View:	322 times
Download:	3 times

Aramco Asia Korea Limited - Saudi Aramco · product shall conform to saudi aramco export packing...

Documents