+ All Categories
Home > Documents > ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration...

ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration...

Date post: 16-Jul-2020
Category:
Upload: others
View: 11 times
Download: 0 times
Share this document with a friend
26
2020 CUSTOMER TRAINING USA
Transcript
Page 1: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

Schedule Overview

2020

CUSTOMER TRAINING USA

© 2019 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.

Scan this code to visit our Media Center: in-depth,

captivating, entertaining.

ARBURG, Inc.644 West Street

Rocky Hill, CT 06067Tel.: +1 (860) 667 6500Fax: +1 (860) 667 6522

[email protected]

ARBURG, Inc.ARBURG Technology Center - California

51 Doppler, Irvine, CA 92618Tel.: +1 (949) 453 1313Fax: +1 (949) 753 5066

[email protected]

ARBURG, Inc.ARBURG Technology Center - Midwest2585 Millennium Drive, Elgin, IL 60124

Tel.: +1 (847) 488 1313Fax: +1 (847) 488 9011

[email protected]

6800

44_E

N_U

S_10

2019

· Su

bjec

t to

lter

atio

ns

Pr

inte

d in

Ger

man

y

Page 2: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)
Page 3: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

3

Dear valued Customer,

The trademark of the ARBURG injection molding machines is

their versatility and flexibility. It is important therefore that you,

our customer, should be able to obtain a full understanding and

appreciation of its full capability.

For this particular reason ARBURG has put together this booklet to offer you

and your technicians the possibility of participating in training courses which will

enable you to acquire all the skills required to work with the ARBURG range of

injection molding machines.

Contained within this booklet is our training schedule for 2020 which includes the

current ARBURG training program subdivided into different courses according to

your specific requirements. Training classes are

offered at the ARBURG US-Headquarters in Rocky Hill, CT as well as at the two

ARBURG Technology Centers in Irvine, CA and Elgin, IL at the Southern Union State

Community College in Opelika, AL and at CEGEP in Thetford Mines, Quebec.

Once you have selected the course that is most suitable for you please contact our

training coordinator Connie DiDomenico at (860) 667-6500. She will assist you

with the respective arrangements.

Yours faithfully

ARBURG, Inc.

Juergen Giesow

Introducción

Page 4: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

4

General information

Course times

8:30 AM - 4:30 PM

Costs

2 days $600.00

PT (Plastics Technology Course)

P (Machine Intensive Course)

3 days $600.00

R (MULTILIFT Robot System Course)

3 days $600.00

M-S (Machine Setting Course)

4 days $1000.00

SC (Service Course)

LSR (Processing Course)

Included:

Extensive course documents

and lunches.

Room reservations

If you require any assistance

making h otel arrangements,

we would be glad to help.

Course enquiries are also

possible via our website.

Registration / confirmation

Registration should take place no later

than 2 weeks before the course com-

mencement date.

We reserve the right to cancel the

courses in case the min. number of

participants is not reached.

For further information please call

Connie DiDomenico at

(860) 667-6500.

If your machine is not listed, there are

training courses avai lable that can be

held at your facility. Please contact AR-

BURG, Inc. for additional information.

Connie DiDomenico

Page 5: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

5

Our Trainers

Tom Emmons

Tobias Pyka

Timo Koenig

Simon Blum

Marc Maulbetsch

Sebastian BehrensStefan Scheibner

Brian Murray Richard Emel

Marcus Hardt

Page 6: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

6

ARBURG, Inc., Rocky Hill, CT

ARBURG Technology Center – California, Irvine, CA

ARBURG Technology Center – Midwest, Elgin, IL

Training facilities

Page 7: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

7

US-HeadquartersARBURG, Inc.644 West StreetRocky Hill, CT 06067Tel.: (860) 667-6500Fax: (860) 667-6522www.arburg.usE-Mail: [email protected]

ATC – CaliforniaARBURG, Inc.51 DopplerIrvine, CA 92618Tel.: (949) 453-1313Fax: (949) 753-5066

ATC – MidwestARBURG, Inc.2585 Millennium DriveElgin, IL 60124Tel.: (847) 488-1313Fax: (847) 488-9011

Southern Union State Community College1701 Lafayette PkwyOpelika, AL 36801

CEGEP DE THETFORD671, Boulevard Frontenac OuestThetford Mines, QC G6G 1N1

Training facilities / Addresses

Page 8: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

8

M

SC-H

SC-E

P

R

PT

LSR

Machine Setting Course

Basic course for machine operation and

programming theory and practice

Service Course

Hydraulic machines maintenance

Service Course

Electric machines maintenance

Intensive hands on Machine Setting Course

MULTILIFT SELECT Robot System Course

ARBURG Robot System MULTILIFT H

ARBURG Robot System MULTILIFT V

ARBURG Robot System MULTILIFT SELECT

Plastics Technology Course

Course on injection molding materials, processing,

part and mold design, troubleshooting and process

optimization

LSR Processing Course

Machine

Service

Technology

Automation

Overview

Page 9: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

9

Course objective: Operation and processing with

ARBURG injection molding machines

Target group: Machine operators, set-up personnel and process engineers

Precondition: Basic knowledge of injection molding

Course duration: 3 days

Cost of course: $600.00

Documents: Course manual with accompanying texts

MMachine setting course

Course description

Topics Machine

M-S SELOGICA direct Setting ALLROUNDER A/E

Course Setting Course ALLROUNDER H

ALLROUNDER S

ALLROUNDER T

ALLROUNDER V

ALLROUNDER GOLDEN EDITION

Course content

• Discussion of typical machine features

• Introduction and exercises involving on-screen controls

• Mold installation and setting of clamping unit

• Setting of injection unit, regarding different plastic materials and

injection molded parts

• Optimization of machine setting

• Data collection and quality control

• Preventive maintenance

Page 10: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

10

Course objective: Working with hydraulic and electric circuit diagrams,

Knowledge of the hydraulic and electric machine sequence.

Preventive maintenance. Effective trouble shooting. Machine calibration.

Target group: Service personnel, maintenance engineers, electricians,

electronic engineers.

Precondition: Basic knowledge of hydraulics, mechanics and electrics.

Course duration: 4 days

Course fee: $1000.00

Documents: Course manual with accompanying schematics.

Service course hydraulic machinesSC-H

Course description

Topics Machine

SC-H SELOGICA Service Course ALLROUNDER S

ALLROUNDER T

ALLROUNDER U

ALLROUNDER V

ALLROUNDER GOLDEN EDITION

Course content

• Introduction (overview and machine preparation)

• Machine’s functional sequence with process diagram

• Important electrical, mechanical and hydraulic components

• Electrical and hydraulic circuit diagrams and machine components

• Possible malfunctions and correction

• Calibration

• Taking measurements from the machine (electrical and hydraulic)

Page 11: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

11

Course objective: Working with hydraulic and electric circuit diagrams,

Knowledge of the hydraulic and electric machine sequence. Preventive

maintenance. Effective trouble shooting. Machine calibration.

Target group: Service personnel, maintenance engineers, electricians,

electronic engineers.

Precondition: Basic knowledge of hydraulics, mechanics and electrics.

Course duration: 4 days

Course fee: $1000.00

Documents: Course manual with accompanying schematics.

Course description

Topics Machine

SC-E SELOGICA Service Course ALLROUNDER A/E

ALLROUNDER H

Course content

• Introduction (overview and machine preparation)

• Machine’s functional sequence with process diagram

• Important electrical, mechanical and hydraulic components

• Electrical and hydraulic circuit diagrams and machine components

• Possible malfunctions and correction

• Calibration

• Taking measurements from the machine (electrical and hydraulic)

Service course electric machines SC-E

Page 12: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

12

Course objective: Gaining in depth knowledge on setting up a SELOGICA

controlled molding Machine

Target group: Senior Process Technicians, Process Engineers, Molding manager

and Plant Manager

Precondition: Participation of an ARBURG M class or several years of experience

in setting up SELOGICA controlled molding machines.

Course duration: 2 days

Course fee: $600.00

Documents: Course manual with accompanying text

Intensive Hands on Machine Setting CourseP

Course description

Topics Control Machine

P SELOGICA direct ALLROUNDER S

Intensive Course ALLROUNDER T

ALLROUNDER U

ALLROUNDER V

ALLROUNDER GOLDEN EDITION

Course content

• Finding Students will work to find the best process parameters for

the product

• Instructor will only guide and supervise

• Focus on the use of the graphic and monitoring functions as well

as SPC functions

• Use of different Plastic Materials

Page 13: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

13

Course objective: Independent working with the MULTILIFT Robot System

Target Group: Set-up personnel, machine operators, production managers,

mold manufacturers and mold designers

Preqiusites: Participation in a SELOGICA machine setting course (M class)

Course duration: 3 days

Course fee: $600.00

Documents: Course manual with accompanying texts

Course description

Topics Robot System

R MULTILIFT H with SELOGICA control

MULTILIFT V with SELOGICA control

MULTILIFT SELECT with SELOGICA control

Course content

• Introduction, operation and programming of the MULTILIFT Robot System

• Various applications of programming with gripper or vacuum

take out sequence

• Good shot, bad shot, sample shot separation using the MULTILIFT

• Use of subroutines

• Preventative maintenance

MULTILIFT Robot System Course R

Page 14: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

14

Course objective: Introduction to injection molding materials and processing

Target group: Machine operators, process engineers, production managers,

controllers, sales, designers, planners

Precondition: Basic knowledge of injection molding and

injection molding materials

Course duration: 2 days

Course fee: $600.00

Documents: Course manual with accompanying texts

PT Plastics Technology Course

Course description

Topics

PT Injection molding materials

Injection molding process

Course content

• Injection molding materials

• Structure and typical properties of injection molding materials

• Overview of common materials

• Amorphous and semi-crystalline injection molded materials

• Injection molding process

• Sequence of injection molding machine

• Influencing variables in injection molding

• Process parameters and their influence on injection molded parts

• Process optimization

Page 15: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

15

Course objective: Developing knowledge of material properties and the injection

molding of liquid silicones (LSR)

Target group: Insatallation technicians, machine operators, mold designers,

process engineers

Requirements: Basic knowledge of injection molding and participation in a

machine adjustment course (M)

Course duration: 4 days

Course fee: $1000.00

Documents: Course folder and CD

"course will be instructed by a Toolmaker, Pump, Material and Machine

specialist"

Course description

Topics

PT Injection molding materials

Injection molding process

Course content

• Introduction to the structure/properties of plastics and LSR materials

• LSR-specific equipment of ALLROUNDERs

• LSR-specific programming, setting and monitoring of an injection

molding machine

• Basics of LSR injection mould configuration

• Process optimisation

• Review of Material Chemistry (done by material manufacturer)

• Review of Silicone Pumping System (done by a pump supplier)

• Review of different Silicone Molds (done by a Silicone Mold Maker)

Course on special processesLSR processing SV LSR

Page 16: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

16

Rocky Hill, CT

Irvine, CA

N

S

EW

500 m

2000 ft

41.651085,-72.664086

91

411

91

West Street

Exit 23At the ramp turn right

Exit 23At the ramp turn left

Hartford

New Haven

ARBURG, Inc.644 West Street | Rocky Hill, CT 06067

405

5

N

S

EW

200 m

500 ft

33.636343, -117.737814

Irvine Center Dr

Bake Pkwy

Research Dr R

esearch Dr

Bake Pkwy

Joh

n W

ayn

e A

irp

ort

/

Ora

ng

e C

ou

nty

Air

po

rt Los Angeles

Muller

Doppler

Santa Ana

San

ta A

na

San

Die

go

ARBURG, Inc. | ATC California51 Doppler | Irvine, CA 92618

How to find us

Page 17: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

Elgin, IL

N

S

EW

500 m

2000 ft

42.063532,-88.349225 C

hic

ago9034

90

Big Timber Rd

Highland Ave Co Hwy 47 Royal Blvd

Co Hwy21N

McL

ean

Blv

d

Boncosky Rd

N R

anda

ll Rd

Slee

py H

ollo

w R

d

ARBURG, Inc. | ATC Midwest 2585 Millennium Drive | Elgin, IL 60124

How to find us

Page 18: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)
Page 19: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

We have taken into account that liability claims against ARBURG are excluded

in the event that a course participant should suffer injury on ARBURG's training

premises.

To: ARBURG, Inc. – Attn. Connie DiDomenico

Fax: (860) 667-6522 - [email protected]

From:

Date, Signature P.O. Number

Company:

Mr. /Mrs.

Address:

E-Mail:

Phone: Fax:

Registration for a Training Class at:

ARBURG, Inc. - Rocky Hill, CT

ARBURG, Inc. - Irvine, CA

ARBURG, Inc. - Elgin, IL

Southern Union State Community College, Opelika, AL

CEGEP DE THETFORD, Thedford Mines, QC

Type (M, SC, P, PT, R, LSR) Date of Course Participant

Registration form Fax

Page 20: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

20

Notes

Page 21: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

21

Notes

Page 22: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

Schedule Overview

2020

CUSTOMER TRAINING USA

© 2019 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.

Scan this code to visit our Media Center: in-depth,

captivating, entertaining.

ARBURG, Inc.644 West Street

Rocky Hill, CT 06067Tel.: +1 (860) 667 6500Fax: +1 (860) 667 6522

[email protected]

ARBURG, Inc.ARBURG Technology Center - California

51 Doppler, Irvine, CA 92618Tel.: +1 (949) 453 1313Fax: +1 (949) 753 5066

[email protected]

ARBURG, Inc.ARBURG Technology Center - Midwest2585 Millennium Drive, Elgin, IL 60124

Tel.: +1 (847) 488 1313Fax: +1 (847) 488 9011

[email protected]

6800

44_E

N_U

S_10

2019

· Su

bjec

t to

lter

atio

ns

Prin

ted

in G

erm

any

Page 23: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

Irvine, CA overview Course

M-SJanuary 29 - 31March 04 - 06April 01 - 03April 27 - 29June 01 - 03September 16 - 18October 13 - 15November 16 - 18December 14 - 16

SC-HFebruary 18 - 21November 03 - 06

SC-EMay 12 - 15September 22 -25

PFebruary 10 - 11April 13 - 14June 04 - 05October 05 - 06November 19 - 20December 07 - 08

PTMarch 02 - 03September 14 - 15

LSRMay 05 - 08

RFebruary 12 - 14April 15 - 17May 27 - 29October 07 - 09December 09 - 11

M-S January 22 - 24March 04 - 06March 10 - 12 (in Spanish)April 01 - 03April 20 - 22May 27 - 29September 09 - 11 (in Spanish)September 22 - 24October 21 - 23November 17 - 19 (in Spanish)December 14 - 16

SC-HMay 05 - 08October 27 - 30 (in Spanish)

SC-EFebruary 25 - 28June 02 - 05 (in Spanish)September 15 - 18

PMarch 23 - 24April 23 - 24June 08 -09October 05 - 06December 07 - 08

PTMarch 02 - 03May 18 - 19 (in Spanish)October 19 - 20

LSRDecember 01 - 04

RFebruary 19 - 21March 25 - 27May 20 - 22 (in Spanish)June 10 - 12October 07 - 09December 09 - 11

M-SMarch 24 - 26May 12 - 14September / October 29 - 01

M-SMarch 23 - 25 (in French)November 02 - 04 (in French)

PMarch 26 - 27 (in French)November 05 - 06 (in French)

Elgin, IL overview

Opelika, AL

Course

CourseCourse Thetford Mines, QC, Canada Course

Page 24: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

22

M-SJanuary 22 - 24February 05 - 07March 18 - 20April 15 - 17June 01 - 03September 16 - 18October 06 - 08November 04 - 06December 07 - 09

SC-HMarch 10 - 13June 09 - 12October 20 - 23December 01 - 04

SC-EFebruary 11 - 14April / May 28 - 01September / October 29 - 02November 17 - 20

PFebruary 27 - 28April 20 - 21June 04 - 05October 12 - 13December 10 - 11

PTMarch 16 - 17May 18 - 19September 14 - 15November 02 - 03

LSRSeptember 22 - 25

RFebruary 24 - 26April 22 - 24May 20 - 22October 14 - 16December 14 - 16

Rocky Hill, CT overviewCourse

Page 25: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

Irvine, CA overview Course

M-SJanuary 29 - 31March 04 - 06April 01 - 03April 27 - 29June 01 - 03September 16 - 18October 13 - 15November 16 - 18December 14 - 16

SC-HFebruary 18 - 21November 03 - 06

SC-EMay 12 - 15September 22 -25

PFebruary 10 - 11April 13 - 14June 04 - 05October 05 - 06November 19 - 20December 07 - 08

PTMarch 02 - 03September 14 - 15

LSRMay 05 - 08

RFebruary 12 - 14April 15 - 17May 27 - 29October 07 - 09December 09 - 11

M-S January 22 - 24March 04 - 06March 10 - 12 (in Spanish)April 01 - 03April 20 - 22May 27 - 29September 09 - 11 (in Spanish)September 22 - 24October 21 - 23November 17 - 19 (in Spanish)December 14 - 16

SC-HMay 05 - 08October 27 - 30 (in Spanish)

SC-EFebruary 25 - 28June 02 - 05 (in Spanish)September 15 - 18

PMarch 23 - 24April 23 - 24June 08 -09October 05 - 06December 07 - 08

PTMarch 02 - 03May 18 - 19 (in Spanish)October 19 - 20

LSRDecember 01 - 04

RFebruary 19 - 21March 25 - 27May 20 - 22 (in Spanish)June 10 - 12October 07 - 09December 09 - 11

M-SMarch 24 - 26May 12 - 14September / October 29 - 01

M-SMarch 23 - 25 (in French)November 02 - 04 (in French)

PMarch 26 - 27 (in French)November 05 - 06 (in French)

Elgin, IL overview

Opelika, AL

Course

CourseCourse Thetford Mines, QC, Canada Course

Page 26: ARBURG, Inc. CUSTOMER TRAINING USA...molding machine • Basics of LSR injection mould configuration • Process optimisation • Review of Material Chemistry (done by material manufacturer)

Schedule Overview

2020

CUSTOMER TRAINING USA

© 2019 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.

Scan this code to visit our Media Center: in-depth,

captivating, entertaining.

ARBURG, Inc.644 West Street

Rocky Hill, CT 06067Tel.: +1 (860) 667 6500Fax: +1 (860) 667 6522

[email protected]

ARBURG, Inc.ARBURG Technology Center - California

51 Doppler, Irvine, CA 92618Tel.: +1 (949) 453 1313Fax: +1 (949) 753 5066

[email protected]

ARBURG, Inc.ARBURG Technology Center - Midwest2585 Millennium Drive, Elgin, IL 60124

Tel.: +1 (847) 488 1313Fax: +1 (847) 488 9011

[email protected]

6800

44_E

N_U

S_10

2019

· Su

bjec

t to

lter

atio

ns

Pr

inte

d in

Ger

man

y


Recommended