P R O T E C T I O N AT H E I G H T SARC FLASH

www.falltech.com

FallTech® has you covered with Arc Rated products for the four components of a Personal Fall Arrest System (PFAS).

Anchorage Connector – When working in an atmosphere where arc flash is a potential risk, a PFAS is nothing without a tie off, anchorage point. FallTech offers Arc Rated anchorage solutions for these challenging work environments.

BodyWear – FallTech Arc Rated Harnesses were developed specifically to protect workers at heights or in confined spaces where arc flash or arc blast is a possibility. FallTech Arc Rated products are tested to meet the requirements of ANSI, OSHA and ASTM.

Connectors – Connectors are a critical component of the PFAS. FallTech

offers a variety of Arc Rated connectors with Soft Pack energy absorbers and a variety of end connectors.

Devices – FallTech’s Arc Rated Self-Retracting Devices are built for workplaces where you need greater access to distant anchors, greater mobility and short stopping distances, compared to traditional lanyards.

Arc Rated Fall Protection

ANSI Z359.14 Compliant | OSHA CFR1926.502 and CFR1910.66 Compliant | ASTM F887 Compliant

Stands Up To The Harshest Of ConditionsFall Protection is designed to keep workers safe when working near energized electrical sources, where an arc flash or an arc blast is a potential risk. Whether on a scissor lift or bucket truck, FallTech Arc Rated fall protection offers superior durability and also delivers superior protection, reducing work related injuries at heights.

The FallTech Advantage You can work in confidence knowing your FallTech Arc Flash-Rated fall protection products are engineered and manufactured to the highest standards of safety and reliability, complying with OSHA Regulations, ANSI standards and the third party testing of ASTM F887.

FallTech Test AccreditationFallTech’s internal testing lab has met the requirements of the IAS Accreditation Criteria for Testing Laboratories (AC89) and has demonstrated compliance with ISO/IEC Standard 17025:2005.

Arc Rated Fall Protection Designed with You in Mind

8070R

Arc FlashThe Ultimate in Arc Rated Performance

FallTech Arc Rated HarnessesFallTech is known for its comfortable designs in bodywear, and that is why we designed the Arc Rated family of harnesses, to provide protection and long lasting wear. The Arc Rated harness quickly self-extinguishes and prevents melting or dripping, specifically for workers near energized electrical sources, where arc flash or arc blast exposure is present.

FallTech Arc Rated harnesses are ASTM F887 third-party tested to ensure workers are protected from falls, even after an arc flash of 40 cal/cm2.

Arc Flash D-ring Extender with Choke Loop.

PVC Coated Alloy Steel, 18” Length,with heavy-duty 1-3/4” Kevlar Webbing.

8366AF

Arc Flash Nomex Leg Pads for most Arc Flash rated harnesses.

5003AF

Arc Flash Nomex Shoulder Yoke/Pad Assembly.

7004YAF

Paired front torso rescue loops.

Arc Rated Nomex® /Kevlar® blend or Nylon construction.

Super soft edging around the neck, will not chafe for added comfort.

Shoulder pads for all day comfort.

6” torso-sewn waist support pad on the construction-belted harness keeps your tools where you need them.

Extreme duty removable work belt, on selected models, is designed to stay in

position even with tool pouches.

Reduce SRD and lanyard connection time with an upright coated Dorsal D-ring.

Three coated hip D-rings for added protection against arc flash or blast.

Coated or leather insulated hardware throughout.

Visi-Lock quick connect buckles include a green indicator for visual assurance

when connected.

Nomex®/Kevlar®

Harnesses Nomex/Kevlar blend webbing provides exceptional protection against arc flash. Because Kevlar webbing is fire-resistant, the harness will retain its performance qualities in an event of a fall after an arc flash incident.

• Belted and non-belted configurations available.• Coated or leather insulated hardware.• Nomex/Kevlar webbing is fire-resistant and self-extinguishing.• Quick connect attachments available on some configurations.• ANSI Z359.1-2007; Z359.12-2009 • OSHA 1910.269 & 1926.• ASTM F887 tested with fire-resistant (FR) properties.

Bodywear

ITEM# SIZED*3 COATED D-RINGS

BACK & SIDE

QUICK CONNECT LEGS, CHEST,

BELT WITH LEATHER

INSULATIONS

COATED MATING

BUCKLE LEGS, CHEST, BELT

PAIRED FRONT TORSO RESCUE LOOPS

COATED MATING BUCKLE TORSO

ADJUSTERS

SHOULDER, LEGS, &

WAIST PADS

8070R

8070

8073R

8073

* For Sized Harnesses, Add: S for Small; M for Medium; L for Large; or XL for X Large to the end of the item number. Example: 8070RS

Belted Harnesses

ITEM# SIZED*4 COATED D-RINGS

BACK AND SIDEQUICK CONNECT LEGS, CHEST, BELT

WITH LEATHER INSULATIONSCOATED MATING BUCKLE

TORSO ADJUSTERS

8060B UniFit

Crossover Climbing Harnesses

ITEM# SIZED*1 COATED

BACK D-RING

QUICK CONNECT LEGS, CHEST,

BELT WITH LEATHER

INSULATIONS

COATED MATING

BUCKLE LEGS, CHEST, BELT

FRONT D-RING

PAIRED FRONT TORSO RESCUE

LOOPS

COATED MATING

BUCKLE TORSO ADJUSTERS

8076R (No Belt)

8076 UniFit, XL (No Belt)

7047R (No Belt)

7047 UniFit, XL, 2X (No Belt)

7047BFD (No Belt)

* For Sized Harnesses, Add: S for Small; M for Medium; L for Large; or XL for X Large to the end of the item number. Example: 7047RS

Non-Belted Harnesses

www.falltech.com

8076R 7047R8073R

Nylon HarnessesA high-strength nylon option offers excellent arc flash protection and will not melt or drip in the event of an arc flash. This blend of high-strength nylon webbing will retain its performance qualities in the event of a fall after an arc flash incident.

• Belted and non-belted configurations available.• Leather insulated hardware.• Nylon won’t drip or melt in the event of an arc flash.• ANSI Z359.1-2007; Z359.12-2009• OSHA 1910.269 & 1926.• ASTM F887 tested with fire-resistant (FR) properties.

Belted Harnesses

ITEM# SIZED

DORSAL WEB LOOP W/ 2 SIDE D-RINGS

QUICK CONNECT LEGS, CHEST,

BELT W/ LEATHER INSULATIONS

MATING BUCKLE LEGS, CHEST, BEST W/ LEATHER INSULATORS

PAIRED FRONT TORSO

RESCUE LOOPS

MATING BUCKLE TORSO

ADJUSTERS W/ LEATHER INSULATORS

SHOULDER, LEGS, & WAIST PADS

8081R

8081

8084R

8084

* For Sized Harnesses, Add: S for Small; M for Medium; L for Large; or XL for X Large to the end of the item number. Example: 8081RXL

Bodywear

8081 8087 7051

ITEM# SIZEDSINGLE

WEB LOOP

QUICK CONNECT LEGS

& CHEST

MATING BUCKLE LEGS & CHEST

PAIRED FRONT TORSO

RESCUE LOOPS

MATING BUCKLE TORSO

ADJUSTERS W/ LEATHER INSULATORS

8087R_

8087 UniFit

7051R_

7051 UniFit, XL, 2X

* For Sized Harnesses, Add: S for Small; M for Medium; L for Large; or XL for X Large to the end of the item number. Example: 8087L

Non-Belted Harnesses

ITEM# SIZED* 1 COATED BACK D-RING COATED MATING BUCKLE LEGS, CHEST, BELT

7049 UniFit, XL

ITEM# SIZED*4 COATED D-RINGS

BACK & SIDE

COATED MATING BUCKLE LEGS, CHEST, BELT

COATED MATING BUCKLE TORSO ADJUSTERS

SHOULDER, LEGS, & WAIST PADS

8063B UniFit

Crossover Climbing Harness

ITEM# DESCRIPTION SIZE D-RINGS MATERIAL

72493FT 1-3/4” Heavy-duty 3’ Length PVC Coated Steel Kevlar

72494FT 1-3/4” Heavy-duty 4’ Length PVC Coated Steel Kevlar

ITEM# DESCRIPTION LENGTH LEGSHARNESS

CONNECTORSANCHORAGE CONNECTORS

MATERIALS

8209AF Adjustable Restraint Lanyard 4’-6 1-SINGLE 1 Choke Loop 1 Steel Snap Hook Nomex and Kevlar Web

8242L Single Leg Shock Absorbing Lanyard 6’ 1-SINGLE 1 Loop 1 Steel Snap Hook Nomex and Kevlar Web

8242YL Y Leg Shock Absorbing Lanyard 6’ Y-LEG 1 Loop 2 Steel Snap Hooks Nomex and Kevlar Web

82423L Single Leg Shock Absorbing Lanyard 6’ 1-SINGLE 1 Loop 1 Steel Rebar Hook Nomex and Kevlar Web

8242Y3L Y Leg Shock Absorbing Lanyard 6’ Y-LEG 1 Loop 2 Steel Rebar Hooks Nomex and Kevlar Web

8242AF Single Leg Shock Absorbing Lanyard 6’ 1-SINGLE 1 Loop 2 Steel Snap Hooks Nomex and Kevlar Web

8242YAF Y Leg Shock Absorbing Lanyard 6’ Y-LEG 1 Steel Snap Hook 2 Steel Snap Hooks Nomex and Kevlar Web

82423AF Single Leg Shock Absorbing Lanyard 6’ 1-SINGLE 1 Steel Snap Hook 1 Steel Rebar Hook Nomex and Kevlar Web

8242Y3AF Y Leg Shock Absorbing Lanyard 6’ Y-LEG 1 Steel Snap Hook 2 Steel Rebar Hooks Nomex and Kevlar Web

Anchorages

72493FT

Connectors

8242Y3L 8242YAF82423L8242YL8242L

Arc Rated Choker anchors feature a heavy-duty 1-¾” Kevlar webbing with a PVC coated D-ring and a choke loop.

FallTech Arc Flash Rated Lanyards offer Kevlar webbing in both single and double-leg models, with a wide range of connectors to fit your work settings and environments. These connectors are wrapped in a Nomex cover for protection from heat and accidental spatter, with a specially-woven Soft Pack energy absorber, designed to limit arrest forces.

72494FT

Self-Retracting Devices

DURATECH ARC FLASH

SRD’S

HOUSING SWIVEL EYE

CONNECTORSLEG-END CONNECTORS

ITEM#

Stee

l Car

abin

er

Car

abin

er w

ith

Alig

nmen

t Clip

Alum

inum

C

arab

iner

Stee

l Sna

p H

ook

Stee

l Reb

ar H

ook

Alum

inum

Sna

p H

ook

Alum

inum

um R

ebar

H

ook

Ext +

Alu

min

um

Snap

Cho

ke L

oop

Alum

inum

Cap

tive-

Eye

Car

abin

er6’ Mini SINGLE LEG: ¾” Kevlar web lifeline with a Nomex protected energy absorber.

72906SC172906SC372906SC472906SC572906SESL72906SES6

6’ Mini TWIN LEG: ¾” Kevlar web lifeline with a Nomex protected energy absorber. 72906TB172906TB372906TB472906TB5

9’ Max SINGLE LEG: ¾” Kevlar web lifeline with a Nomex protected energy absorber. 82909SC182909SC382909SC682909SC5

9’ Max TWIN LEG: ¾” Kevlar web lifeline with a Nomex protected energy absorber. 82909TB182909TB382909TB682909TB5

11’ SINGLE LEG: ¾” Kevlar web lifeline with a longer working length.82911SC1

82911SC3

82911SG6

82911SG5

DuraTech® Arc Flash SRD’s

DuraTech Arc Flash rated SRD’s come in a variety of configurations to meet the requirements of your work environment. A lightweight, compact design offers a durable housing, a ¾” Kevlar webbing lifeline with the option of a Nomex protected shock absorber, and a wide variety of connection options. The DuraTech Arc Rated SRD’s are extremely effective fall protection after an arc flash or blast up to 40 cal/cm2, making it ideal where high voltage electricity is a critical concern. FallTech’s Arc Rated SRD’s offer greater access to distant anchors, greater mobility and short stopping distances for added reliability.

• 6’ DuraTech Mini – Lightweight with typical arrest distances as low as 26”.• 9’ DuraTech Max – Maximum stopping power, tested up to 5’ below the D-ring.• 11’ DuraTech - Longer working length with maximum stopping power.• User Capacity – 310 lbs. ANSI and 425 lbs. OSHA• Certified to: ANSI – Z359.14, OSHA – CFR1926.502, CFR1910.66, ASTM – F887.

82909TB1

72906TB472906SC3

82909SC1

82911SC382911SC1

6’ DuraTech Mini

9’ DuraTech Max

11’ DuraTech

Discover the full selection of Arc Rated Fall Protection products at www.FallTech.com

FallTech®

Warning: All Fall Protection equipment should only be used after reading and understanding the manufacturer’s instructions and propertraining on the product. Failure to receive proper training and follow the manufacturer’s instructions could result in serious injury or death.#MS23.1 ALX

1306 S. Alameda St. Compton, CA 90221-4803 © 2016www.falltech.com

800.719.4619 323.752.5613

www.falltech.com