CENTRAL PUGET SOUND REGIONAL TRANSIT AUTHORITY ARCHITECTURAL STANDARD DRAWINGS AUGUST 2019 DRAWING No.: REV: THE PREPARATION OF THIS DOCUMENT HAS BEEN FINANCED IN PART THROUGH A GRANT FROM THE U.S. DEPARTMENT OF TRANSPORTATION FEDERAL TRANSIT ADMINISTRATION UNDER THE URBAN MASS TRANSPORTATION ACT OF 1964, AS AMENDED, AND IN PART BY THE CENTRAL PUGET SOUND REGIONAL TRANSIT AUTHORITY DISTRICT OF WASHINGTON, AND THE STATE OF WASHINGTON APPROVED BY: DATE: 0 STD-GZT001 MOISES GUTIERREZ DECM DEPUTY EXECUTIVE DIRECTOR DESIGN AND ENGINEERING THESE STANDARD DRAWINGS ARE ISSUED TO ENSURE THE APPLICATION OF UNIFORM STANDARDS FOR THE DESIGN, FABRICATION, INSTALLATION, AND CONSTRUCTION OF SPECIFIC ITEMS OF WORK FOR THE SOUND TRANSIT LINK LIGHT RAIL, SOUNDER, REGIONAL EXPRESS BUS, AND BUS RAPID TRANSIT SYSTEMS, AS DEPICTED HEREIN. IN CONJUNCTION WITH THE DESIGN CRITERIA MANUAL, STANDARD SPECIFICATIONS, AND DIRECTIVE DRAWINGS, THE DESIGNER SHALL INSERT THESE STANDARD DRAWINGS INTO THE PROJECT CONTRACT DOCUMENTS. THE DESIGNER SHALL USE THESE STANDARD DRAWINGS IN THE DESIGN OF INTERFACE POINTS AND PROJECT SPECIFIC ITEMS OF WORK. THESE STANDARD DRAWINGS DO NOT EXEMPT THE CONSULTANT FROM THE PROFESSIONAL RESPONSIBILITY OF DEVELOPING AN APPROPRIATE DESIGN AND COMPLYING WITH THE STANDARD OF CARE. IF THE DESIGNER IDENTIFIES THAT AN ASPECT OR ASPECTS OF THESE STANDARD DRAWINGS ARE INAPPROPRIATE FOR INSERTION IN THE FINAL DESIGN, THE DESIGNER SHALL INFORM AND SECURE CONCURRENCE FROM THE SOUND TRANSIT CORRIDOR DESIGN MANAGER OR PROJECT MANAGER AS PART OF DESIGN MILESTONE SUBMITTALS. SOUND TRANSIT MAKES THESE DOCUMENTS AVAILABLE ON AN AS-IS BASIS. UPDATING THE STANDARD DRAWINGS IS AN ONGOING PROCESS AND REVISIONS ARE ISSUED REGULARLY. COMMENTS, QUESTIONS, AND IMPROVEMENT IDEAS ARE WELCOMED. PLEASE SEND ALL COMMENTS TO DECM DEPUTY EXECUTIVE DIRECTOR OF DESIGN AND ENGINEERING. APPROVED BY: DATE: JULIE MONTGOMERY DECM DIRECTOR OF ARCHITECTURE & ART uncontrolled document from soundtransit.org
Transcript
CENTRAL P UGET S OUND REGI ONAL TRANSIT AUTHORI TY
ARCHITECTURAL
STANDARD DRAWINGS
AUGUST 2019
DRAWING No.:
REV:
THE PREPARATION OF THIS DOCUMENT HAS BEEN FINANCED IN PART THROUGH A GRANT FROM THE
U.S. DEPARTMENT OF TRANSPORTATION FEDERAL TRANSIT ADMINISTRATION UNDER THE URBAN
MASS TRANSPORTATION ACT OF 1964, AS AMENDED, AND IN PART BY THE CENTRAL PUGET SOUND
REGIONAL TRANSIT AUTHORITY DISTRICT OF WASHINGTON, AND THE STATE OF WASHINGTON
APPROVED BY: DATE:
0
STD-GZT001
MOISES GUTIERREZ
DECM DEPUTY EXECUTIVE DIRECTOR DESIGN AND ENGINEERING
THESE STANDARD DRAWINGS ARE ISSUED TO ENSURE THE APPLICATION OF UNIFORM STANDARDS FOR THE
DESIGN, FABRICATION, INSTALLATION, AND CONSTRUCTION OF SPECIFIC ITEMS OF WORK FOR THE SOUND
TRANSIT LINK LIGHT RAIL, SOUNDER, REGIONAL EXPRESS BUS, AND BUS RAPID TRANSIT SYSTEMS, AS
DEPICTED HEREIN. IN CONJUNCTION WITH THE DESIGN CRITERIA MANUAL, STANDARD SPECIFICATIONS, AND
DIRECTIVE DRAWINGS, THE DESIGNER SHALL INSERT THESE STANDARD DRAWINGS INTO THE PROJECT
CONTRACT DOCUMENTS. THE DESIGNER SHALL USE THESE STANDARD DRAWINGS IN THE DESIGN OF
INTERFACE POINTS AND PROJECT SPECIFIC ITEMS OF WORK.
THESE STANDARD DRAWINGS DO NOT EXEMPT THE CONSULTANT FROM THE PROFESSIONAL
RESPONSIBILITY OF DEVELOPING AN APPROPRIATE DESIGN AND COMPLYING WITH THE STANDARD OF CARE.
IF THE DESIGNER IDENTIFIES THAT AN ASPECT OR ASPECTS OF THESE STANDARD DRAWINGS ARE
INAPPROPRIATE FOR INSERTION IN THE FINAL DESIGN, THE DESIGNER SHALL INFORM AND SECURE
CONCURRENCE FROM THE SOUND TRANSIT CORRIDOR DESIGN MANAGER OR PROJECT MANAGER AS PART
OF DESIGN MILESTONE SUBMITTALS.
SOUND TRANSIT MAKES THESE DOCUMENTS AVAILABLE ON AN AS-IS BASIS. UPDATING THE STANDARD
DRAWINGS IS AN ONGOING PROCESS AND REVISIONS ARE ISSUED REGULARLY. COMMENTS, QUESTIONS,
AND IMPROVEMENT IDEAS ARE WELCOMED. PLEASE SEND ALL COMMENTS TO DECM DEPUTY EXECUTIVE
DIRECTOR OF DESIGN AND ENGINEERING.
APPROVED BY: DATE:
JULIE MONTGOMERY
DECM DIRECTOR OF ARCHITECTURE & ART
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
DISCLAIMER FOR
Design and Engineering Design Standards Documents
Sound Transit makes these documents available on an "as is" basis. By accepting receipt of the documents, the receiver agrees to the following:
The documents are provided for information only;
The receiver will not utilize the documents in any way that violates or infringes on Sound Transit’s intellectual property rights in such documents;
The provided documents should not be construed to represent formal design guidance and/or direction for any project;
Sound Transit makes no representation or warranty that the provided data is complete, appropriate, or fit for any particular purpose, stated or otherwise;
All documents provided by Sound Transit, including any revisions, shall remain the personal and intellectual property of Sound Transit; and
To indemnify, defend, and hold harmless Sound Transit, its consultants, and agent(s) from any and all damages and claims arising from the receiver’s use of these documents.
APPLICABILITY FOR
Design and Engineering Design Standards Documents
Project teams shall refer to their executed project contracts for applicable document versions/revisions.
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
GENERAL
DWG. No. TITLEREV
STD-GZT001 0 COVER SHEET
STD-GZI001 0 INDEX OF DRAWINGS
AT-GRADE CENTER PLATFORM ENTRY LAYOUT
STD-GZI001 0 INDEX OF DRAWINGS
STD-APP211 0 AT-GRADE CENTER PLATFORM ENTRY LAYOUT
STD-APP212 0 AT-GRADE SIDE PLATFORM ENTRY LAYOUT
STD-ATD222 0 PUBLIC STAIRS RUNNEL DETAILS
STD-AVD228 0 ELEVATORS CABS WITH GLAZING AT SIDES
STD-AID240 0 RESTROOMS
STD-APP270 1 INFORMATION KIOSK AT CENTER PLATFORM
STD-APP271 1 INFORMATION KIOSK AT SIDE PLATFORM
STD-ADD280 0 WINDSCREENS AT CENTER PLATFORM
STD-ASD301 0 TICKET VENDING MACHINE AND SMART CARD READERS
STD-ASD3050
EQUIPMENT MOUNTING ELEVATIONS AND DETAILS
STD-ATD325 0 EXIT STAIR DETAILS
STD-AVD340 0 ELEVATOR DETAILS
STD-AID370 0 TOILET ACCESSORIES
STD-AND500 0 SIGNAGE TYPES
STD-AND501 0 SIGNAGE MOUNTING DETAILS
STD-AND502 0 SIGNAGE MOUNTING DETAILS
INDEX OF DRAWINGS
No. DATE DSN CHK APP REVISION
SUBMITTED BY: DATE: REVIEWED BY: DATE: DATE:
CONTRACT No.:
FILENAME:
SCALE: DRAWING No.:
SHEET No.: REV:
LIN
E IS
1
" A
T
FU
LL
S
CA
LE
DESIGNED BY:
DRAWN BY:
CHECKED BY:
APPROVED BY:
09
/1
0/1
9 | 9
:2
9 A
M | G
AL
LA
GH
ER
C
T:\_
HQ
_IN
TE
RN
AL
\E
XH
IB
IT
S\G
UID
AN
CE
-S
TA
ND
AR
D_
DR
AW
IN
GS
- W
OR
KIN
G\A
RC
H-M
EC
H\S
TA
ND
AR
D\D
RA
WIN
GS
\S
TD
-G
ZI0
01
.D
WG
STD-GZI001
FACILITY ID:
J. PEREZ
C. GALLAGHER
D. POWELL
J. MONTGOMERY
N/A
8/2019
SOUND TRANSIT
STANDARD DRAWING
ARCHITECTURAL
INDEX OF DRAWINGS
STD-GZI001
0
1 8/2019 NEW - ARCH DIRECTIVE AND STANDARD DWGS
ARCHITECTURAL
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
16'-0" FOR 2 TVM LAYOUT
20'-0" FOR 3 TVM LAYOUT
TVM
48"
30
"
BENCH
8'-0
" M
IN
. A
FF
9'-0
" M
IN
. A
FF
6'-0"
EDGE OF
PLATFORM
4'-0" FOR 3
TVM LAYOUT
BENCH
6'-0"
16'-0" (4 MODULES @ 4'-0" EACH)
FOR 2 TVM LAYOUT
2'-0" MIN
4'-0" MAX
2'-0 MIN
4'-0" MAX
No. DATE DSN CHK APP REVISION
SUBMITTED BY: DATE: REVIEWED BY: DATE: DATE:
CONTRACT No.:
FILENAME:
SCALE: DRAWING No.:
SHEET No.: REV:
LIN
E IS
1
" A
T
FU
LL
S
CA
LE
DESIGNED BY:
DRAWN BY:
CHECKED BY:
APPROVED BY:
10
/3
0/1
9 | 9
:4
2 A
M | G
AL
LA
GH
ER
C
T:\_
HQ
_IN
TE
RN
AL
\E
XH
IB
IT
S\D
IR
EC
TIV
E-S
TA
ND
AR
D_
DR
AW
IN
GS
\A
RC
H-M
EC
H\S
TA
ND
AR
D\D
RA
WIN
GS
\S
TD
-A
PP
21
1.D
WG
STD-APP211
FACILITY ID:
J. PEREZ
C. GALLAGHER
D. POWELL
J. MONTGOMERY
1/4" = 1'-0"
8/2019
SOUND TRANSIT
STANDARD DRAWING
ARCHITECTURAL
AT-GRADE CENTER PLATFORM
ENTRY LAYOUT
STD-APP211
0
SCALE: 1/4" = 1'-0"
ELEVATIONB
-
CUSTOMER
INFORMATION
PANELS
PASSENGER
EMERGENCY
TELEPHONE
BARRIER
(42" MIN HGT)
JUNCTION BOX
FOR FUTURE
TRIP PLANNER
STATION
APPROACH
RAMP
IF REQD
AT 3 TVM
LAYOUTS
SMART CARD READER
PLATFORM EDGE
DETECTABLE
WARNING SURFACE
PLATFORM EDGE
DETECTABLE
WARNING SURFACE
SMART CARD READER
FARE PAID ZONE
SIGN ABOVE
TELEPHONE CO DEMARCATION CABINET &
COMMUNICATIONS DISTRIBUTION PANEL
WHERE REQUIRED
SIGNAGE MOUNTING
HEIGHT WHEN
CIRCULATION BELOW
SIGNAGE MOUNTING
HEIGHT ALLOWED WHEN
NO CIRCULATION BELOW
FARE PAID
ZONE SIGN
JUNCTION BOX FOR FUTURE
TRIP PLANNER PROVIDE (1)
1"C PWR AND (1) 1"C DATA
PASSENGER EMERGENCY TELEPHONE CUSTOMER INFORMATION PANELS
SMART CARD READER
19
'-0
"4
'-7
1
/4
"
1'-0
"
TY
P
AT 2 TVM
LAYOUTS
4'-7
1
/4
"
1'-0
"
TY
P
CL
T
RA
CK
CL
T
RA
CK
CL
P
LA
TF
OR
M
OPP
8'-0
" A
FF
9'-0
" A
FF
16'-0" (4 MODULES @ 4'-0" EACH)
2'-0" MIN
4'-0" MAX 6'-0"
RAMP
IF REQD
ACCESS PANEL TO TELEPHONE
CO DEMARCATION CABINET AT
COMMUNICATIONS DISTRIBUTION
PANEL WHERE REQUIRED
FARE PAID
ZONE SIGN
SMART
CARD
READER
TICKET
VENDING
MACHINES
OPTIONAL CUSTOMER
INFORMATION PANELS
SIGNAGE MOUNTING
HEIGHT WHEN
CIRCULATION BELOW
SIGNAGE MOUNTING
HEIGHT ALLOWED
WHEN NO CIRCULATION
BELOW
SYSTEM
INFORMATION
PANELS
BENCH
20'-0" (5 MODULES @ 4'-0" EACH)
6'-0"
2'-0" MIN
4'-0" MAX
RAMP
IF REQD
TICKET VENDING
MACHINES
TICKET VENDING MACHINEOPTIONAL CUSTOMER
INFORMATION PANELS
CUSTOMER
INFORMATION
PANELS
ACCESS PANEL TO TELEPHONE
CO DEMARCATION CABINET AT
COMMUNICATIONS DISTRIBUTION
PANEL WHERE REQUIRED
FARE PAID
ZONE SIGN
SMART
CARD
READER
TYP
BENCH
48"
30
"
TVM
BENCH
SCALE: 1/4" = 1'-0"
ELEVATIOND
-SCALE: 1/4" = 1'-0"
ELEVATIONC
-
0 8/2019 NEW - ARCH DIRECTIVE AND STANDARD DWGS
B
-
D
-
C
-
A
STD-APD360
B
STD-ASD301
GENERAL NOTES:
1. THIS PLAN INDICATES A PROTOTYPICAL CONFIGURATION LAYOUT ONLY.
SPECIFIC STATION REQUIREMENTS AND LAYOUTS WILL VARY.
2. DASHED LINES AT TVM EQUIPMENT PLAN INDICATE ADA APPROACH SPACE.
PARALLEL ADA APPROACH IS ASSUMED.
3. REFER TO SOUND TRANSIT CUSTOMER SIGNAGE MANUAL TO DETERMINE
MOUNTING HEIGHTS FOR SYSTEMS INFORMATION PANELS, PASSENGER
EMERGENCY TELEPHONE, AND TRIP PLANNER.
TACTILE
WAYFINDING
PATH
SCALE: 1/4" = 1'-0"
PLAN A
DIR-APP131
DIR-APP135
1'-0
"
REGISTERED
ARCHITECT
STATE OF WASHINGTON
JULIE ANNE MONTGOMERY
8073
FARE PAID ZONE
FLOORING DEMARCATION
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
24'-0"
12
'-0
"4
'-7
1
/4
"
TVM
48"
30
"
BENCH
8'-0
" M
IN
. A
FF
9'-0
" M
IN
. A
FF
6'-0"
RAMP
IF REQD
END OF
PLATFORM
TYP
4'-0" MAX
2'-0" MIN
No. DATE DSN CHK APP REVISION
SUBMITTED BY: DATE: REVIEWED BY: DATE: DATE:
CONTRACT No.:
FILENAME:
SCALE: DRAWING No.:
SHEET No.: REV:
LIN
E IS
1
" A
T
FU
LL
S
CA
LE
DESIGNED BY:
DRAWN BY:
CHECKED BY:
APPROVED BY:
08
/0
8/1
9 | 1
1:3
0 A
M | G
AL
LA
GH
ER
C
T:\_
HQ
_IN
TE
RN
AL
\E
XH
IB
IT
S\G
UID
AN
CE
-S
TA
ND
AR
D_
DR
AW
IN
GS
- W
OR
KIN
G\A
RC
H-M
EC
H\S
TA
ND
AR
D\D
RA
WIN
GS
\S
TD
-A
PP
21
2.D
WG
STD-APP212
FACILITY ID:
J. PEREZ
C. GALLAGHER
D. POWELL
J. MONTGOMERY
AS NOTED
8/2019
SOUND TRANSIT
STANDARD DRAWING
ARCHITECTURAL
AT-GRADE SIDE PLATFORM
ENTRY LAYOUT
STD-APP212
0
1'-0
"
TY
P
CL
T
RA
CK
B
-
1
STD-APD360
B
STD-ASD301
SCALE: 1/4" = 1'-0"
ELEVATION B
-
TVM
TELEPHONE CO DEMARCATION
CABINET AND COMMUNICATIONS
DISTRIBUTION PANEL WHERE
REQUIRED
ALTERNATE LOCATION FOR
TELEPHONE CO DEMARCATION
CABINET AND COMMUNICATIONS
DISTRIBUTION PANEL WHERE
REQUIRED
OPTIONAL 3RD TVM LOCATION
CUSTOMER INFORMATION
PANEL
PASSENGER EMERGENCY TELEPHONE
JUNCTION BOX FOR
FUTURE TRIP PLANNER
FACE OF BARRIER (42" MIN HGT)
48"
30
"
GUARDRAIL OR SIM
SMART CARD READER, TYP
FARE PAID ZONE
SIGN ABOVE
PLATFORM EDGE
DETECTABLE
WARNING SURFACE
BENCH
ALTERNATE LOCATION FOR TELEPHONE
CO DEMARCATION CABINET AND
COMMUNICATIONS DISTRIBUTION PANEL
WHERE REQUIRED
PASSENGER EMERGENCY TELEPHONE
SIGNAGE MOUNTING HEIGHT
WHEN CIRCULATION BELOW
SIGNAGE MOUNTING HEIGHT ALLOWED
WHEN NO CIRCULATION BELOW
JUNCTION BOX FOR FUTURE
TRIP PLANNER PROVIDE
(1) 1"C PWR AND (1) 1"C DATA
CUSTOMER
INFORMATION
PANELS
3RD TVM LOCATION
(OR FUTURE)
OPTIONAL
CUSTOMER
INFORMATION PANEL
SMART CARD
READER
TICKET VENDING
MACHINE
PROVIDE ACCESS PANEL TO TELEPHONE
CO DEMARCATION CABINET &
COMMUNICATIONS DISTRIBUTION PANEL
WHERE REQUIRED
FARE PAID ZONE SIGN ALIGN
WITH ORCA CARD READER
OPTIONAL 4'-0" SPACE FOR
ADDITIONAL SIGNAGE IF
NEEDED. IF NOT USED
PROVIDE 2'-0" MIN TO SAFTP
SCALE: 1/4" = 1'-0"
ELEVATION C
-
8'-0
" M
IN
. A
FF
9'-0
" M
IN
. A
FF
TYP
B
STD-ASD301
BENCH
ALTERNATE LOCATION FOR TELEPHONE
CO DEMARCATION CABINET AND
COMMUNICATIONS DISTRIBUTION PANEL
WHERE REQUIRED
PASSENGER EMERGENCY TELEPHONE
SIGNAGE MOUNTING HEIGHT
WHEN CIRCULATION BELOW
SIGNAGE MOUNTING HEIGHT ALLOWED
WHEN NO CIRCULATION BELOW
JUNCTION BOX FOR
FUTURE TRIP PLANNER
SMART CARD
READER
TICKET VENDING
MACHINE
PROVIDE ACCESS PANEL TO
TELEPHONE CO DEMARCATION CABINET
& COMMUNICATIONS DISTRIBUTION
PANEL WHERE REQUIRED
FARE PAID ZONE SIGN ALIGN
WITH ORCA CARD READER
OPTIONAL 4'-0" SPACE FOR
ADDITIONAL SIGNAGE IF
NEEDED. IF NOT USED
PROVIDE 2'-0" MIN TO SAFTP
CUSTOMER
INFORMATION
PANELS
20'-0"
12
'-0
"4
'-7
1
/4
"
48"
30
"
6'-0"
RAMP
IF REQD
END OF
PLATFORM
4'-0" MAX
2'-0" MIN
1'-0
"
TY
P
CL
T
RA
CK
C
-
1
STD-APD360
TELEPHONE CO DEMARCATION
CABINET AND COMMUNICATIONS
DISTRIBUTION PANEL WHERE
REQUIRED
CUSTOMER
INFORMATION
PANEL
PASSENGER EMERGENCY TELEPHONE
JUNCTION BOX FOR
FUTURE TRIP PLANNER
FACE OF BARRIER (42" MIN HGT)
GUARDRAIL OR SIM
SMART CARD READER, TYP
FARE PAID ZONE
SIGN ABOVE
PLATFORM EDGE
DETECTABLE
WARNING SURFACE
BENCH
48"
30
"
TVMTVM
0 8/2019 NEW - ARCH DIRECTIVE AND STANDARD DWGS
GENERAL NOTES:
1. THIS PLAN INDICATES A PROTOTYPICAL CONFIGURATION FOR A 3 TVM LAYOUT
ONLY. SPECIFIC STATION REQUIREMENTS AND LAYOUTS WILL VARY.
2. DASHED LINES AT TVM EQUIPMENT PLAN INDICATE ADA APPROACH SPACE.
PARALLEL ADA APPROACH IS ASSUMED.
3. REFER TO SOUND TRANSIT CUSTOMER SIGNAGE MANUAL TO DETERMINE
MOUNTING HEIGHTS FOR CUSTOMER INFORMATION PANELS, AND TRIP PLANNER.
4. REFER TO SYSTEMS GUIDANCE DRAWINGS TO DETERMINE MOUNTING HEIGHTS
FOR PASSENGER EMERGENCY TELEPHONES.
TACTILE WAYFINDING
PATH
TACTILE WAYFINDING
PATH
SCALE: 1/4" = 1'-0"
PLAN - 3 TVM LAYOUT A
DIR-APP131 SCALE: 1/4" = 1'-0"
PLAN - 2 TVM LAYOUT A
DIR-APP131
FARE PAID ZONE
FLOORING DEMARCATION
FARE PAID ZONE
FLOORING
DEMARCATION
REGISTERED
ARCHITECT
STATE OF WASHINGTON
JULIE ANNE MONTGOMERY
8073
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
No. DATE DSN CHK APP REVISION
SUBMITTED BY: DATE: REVIEWED BY: DATE: DATE:
CONTRACT No.:
FILENAME:
SCALE: DRAWING No.:
SHEET No.: REV:
LIN
E IS
1
" A
T
FU
LL
S
CA
LE
DESIGNED BY:
DRAWN BY:
CHECKED BY:
APPROVED BY:
08
/0
8/1
9 | 1
1:2
6 A
M | G
AL
LA
GH
ER
C
T:\_
HQ
_IN
TE
RN
AL
\E
XH
IB
IT
S\G
UID
AN
CE
-S
TA
ND
AR
D_
DR
AW
IN
GS
- W
OR
KIN
G\A
RC
H-M
EC
H\S
TA
ND
AR
D\D
RA
WIN
GS
\S
TD
-A
TD
22
2.D
WG
STD-ATD222
FACILITY ID:
J. PEREZ
C. GALLAGHER
D. POWELL
J. MONTGOMERY
AS NOTED
8/2019
SOUND TRANSIT
STANDARD DRAWING
ARCHITECTURAL
PUBLIC STAIRS
RUNNEL DETAILS
STD-ATD222
0
B
-
A
-
SCALE: 1" = 1'-0"
BICYCLE / STAIR / RUNNEL CLEARANCE A
- SCALE: 1" = 1'-0"
LONGITUDINAL SECTION B
- SCALE: 6" = 1'-0"
RUNNEL DETAIL 1
-
72" MIN
VA
RIE
S
STAINLESS
STEEL
HANDRAIL
STAIR TREAD
WALL PANEL OR
RAILING
TYPICAL
BICYCLE
PRECAST
CONCRETE BIKE
RUNNEL
STAINLESS STEEL
HANDRAIL
PRECAST
CONCRETE BIKE
RUNNEL
STAIR TREAD
STAIR TREAD
BEYOND
+/-1 1/2" DIAMETER
BIKE TIRE
PRECAST
CONCRETE
RUNNEL
1'-10"
WALL AS
SCHEDULED
1
-
ANCHOR
0 8/2019 NEW - ARCH DIRECTIVE AND STANDARD DWGS
GENERAL NOTES:
1. BIKE RUNNELS SHALL BE PROVIDED ON BOTH SIDES
OF STRAIGHT STAIRS FOR ASCENT AND DESCENT
(WITHOUT USER CONFLICT).
2. BIKE RUNNELS SHALL BE PROVIDED ON THE OUTER
SIDE OF SWITCHBACK STAIRS ONLY.
STRUCTURE - VARIES
8"
3'-7 1/2"
0'-1
1 1
/2
"
REGISTERED
ARCHITECT
STATE OF WASHINGTON
JULIE ANNE MONTGOMERY
8073
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
TA-6A
TA-1A
TA-5
TA-6B
WC
TA-4A
LAV
WC
TA-9
LIGHT FIXTURE
TA-6C
SS METAL PANELS
LAV
HOLLOW METAL DOOR
& FRAME
TA-3A
TA-8A
SWITCH
TA-7A
FD
A
D
C
B
TA-6A
TA-9
TA-4A (TA-4 @
TRANSIT DRIVE RR)
LAV
WC
TA-6A
TILE, TYP
TA-5
4'-0"
TA-1A (TA-1 @
TRANSIT DRIVE RR)
TA-6B
TILE
TA-7
TA-8A
HOLLOW METAL DOOR
& FRAME
TA-3A (TA-3 @
TRANSIT DRIVE RR)
TILE
--
1'-6
"
TA-7A
FINISH FLOOR
BO CEILING
8'-0
"
FINISH FLOOR
BO CEILING
8'-0
"
FINISH FLOOR
BO CEILING
8'-0
"
FINISH FLOOR
BO CEILING
8'-0
"
SS METAL PANELSSS METAL PANELSSS METAL PANELS
FINISH FLOOR
BO CEILING
8'-0
"
FINISH FLOOR
BO CEILING
8'-0
"
FINISH FLOOR
BO CEILING
8'-0
"
FINISH FLOOR
BO CEILING
8'-0
"
TILE, TYP
VA
RIE
S
SE
E P
RO
JE
CT
P
LA
NS
VARIES
SEE PROJECT PLANS
VA
RIE
S
SE
E P
RO
JE
CT
P
LA
NS
VARIES
SEE PROJ PLANS
WALL MOUNTED SPACE
HEATER @ STAFF RR ONLY
GYPSUM BOARD
SS METAL PANELS
CHANGING
STATION
CHANGING
STATION
A
D
C
B
--
UR
UR
No. DATE DSN CHK APP REVISION
SUBMITTED BY: DATE: REVIEWED BY: DATE: DATE:
CONTRACT No.:
FILENAME:
SCALE: DRAWING No.:
SHEET No.: REV:
LIN
E IS
1
" A
T
FU
LL
S
CA
LE
DESIGNED BY:
DRAWN BY:
CHECKED BY:
APPROVED BY:
08
/0
8/1
9 | 1
1:2
0 A
M | G
AL
LA
GH
ER
C
T:\_
HQ
_IN
TE
RN
AL
\E
XH
IB
IT
S\G
UID
AN
CE
-S
TA
ND
AR
D_
DR
AW
IN
GS
- W
OR
KIN
G\A
RC
H-M
EC
H\S
TA
ND
AR
D\D
RA
WIN
GS
\S
TD
-A
ID
24
0.D
WG
STD-AID240
FACILITY ID:
J. PEREZ
C. GALLAGHER
D. POWELL
J. MONTGOMERY
1/4" = 1'-0"
8/2019
SOUND TRANSIT
STANDARD DRAWING
ARCHITECTURAL
RESTROOMS
STD-AID240
0
INTERIOR ELEVATION - STAFF/
TRANSIT DRIVER RESTROOM
SCALE: 1/4"=1'-0"
B
-
INTERIOR ELEVATION - STAFF/
TRANSIT DRIVER RESTROOM
SCALE: 1/4"=1'-0"
C
-
INTERIOR ELEVATION - STAFF/
TRANSIT DRIVER RESTROOM
SCALE: 1/4"=1'-0"
D
-
INTERIOR ELEVATION - STAFF/
TRANSIT DRIVER RESTROOM
SCALE: 1/4"=1'-0"
A
-
INTERIOR ELEVATION - PUBLIC
RESTROOM
SCALE: 1/4"=1'-0"
D
-
INTERIOR ELEVATION - PUBLIC
RESTROOM
SCALE: 1/4"=1'-0"
C
-
INTERIOR ELEVATION - PUBLIC
RESTROOM
SCALE: 1/4"=1'-0"
B
-
INTERIOR ELEVATION - PUBLIC
RESTROOM
SCALE: 1/4"=1'-0"
A
-
0 8/2019 NEW - ARCH DIRECTIVE AND STANDARD DWGS
SCALE: 1/4" = 1'-0"
ENLARGED RCP - PUBLIC RESTROOM
SCALE: 1/4" = 1'-0"
ENLARGED RCP - STAFF/
TRANSIT DRIVER RESTROOM
ENLARGED PLAN - STAFF/ TRANSIT
DRIVER RESTROOM
SCALE: 1/4"=1'-0"
2
-
ENLARGED PLAN - PUBLIC
RESTROOM
SCALE: 1/4"=1'-0"
1
-
NOTE:
PUBLIC RESTROOMS
ONLY PROVIDED
WHERE REQUIRED
REGISTERED
ARCHITECT
STATE OF WASHINGTON
JULIE ANNE MONTGOMERY
8073
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
CL PLATFORM CL VEHICLE DOORCL VEHICLE DOOR
1'-6
"
VE
RIF
Y W
/E
QU
IP
8'-0
" M
IN
. A
FF
9'-0
" M
IN
. A
FF
8'-0" MIN
8'-0
" M
IN
. A
FF
9'-0
" M
IN
. A
FF
8'-0"
No. DATE DSN CHK APP REVISION
SUBMITTED BY: DATE: REVIEWED BY: DATE: DATE:
CONTRACT No.:
FILENAME:
SCALE: DRAWING No.:
SHEET No.: REV:
LIN
E IS
1
" A
T
FU
LL
S
CA
LE
DESIGNED BY:
DRAWN BY:
CHECKED BY:
APPROVED BY:
08
/0
8/1
9 | 1
1:2
9 A
M | G
AL
LA
GH
ER
C
T:\_
HQ
_IN
TE
RN
AL
\E
XH
IB
IT
S\G
UID
AN
CE
-S
TA
ND
AR
D_
DR
AW
IN
GS
- W
OR
KIN
G\A
RC
H-M
EC
H\S
TA
ND
AR
D\D
RA
WIN
GS
\S
TD
-A
PP
27
0.D
WG
STD-APP270
FACILITY ID:
2'-0
"
J. PEREZ
C. GALLAGHER
D. POWELL
J. MONTGOMERY
3/8" = 1'-0"
8/2019
SOUND TRANSIT
STANDARD DRAWING
ARCHITECTURAL
INFORMATION KIOSK
AT CENTER PLATFORM
STD-APP270
1
SCALE: 3/8" = 1'-0"
ELEVATION
B
-
A
-
SCALE: 3/8" = 1'-0"
ELEVATION
A
-
B
-
2
STD-APD360
2
STD-APD360
TACTILE INFORMATION
PANEL
PASSENGER
EMERGENCY
PHONE
SYSTEM
INFORMATION
PANELS
TACTILE
INFORMATION
PANEL
TACTILE TRAIN
WAITING AREA
TACTILE PATH
PLATFORM EDGE DETECTABLE
WARNING SURFACE
20'-0" 20'-0"
3'-0" 3'-0" 3'-0" 3'-0"
8'-0" MIN
SIGNAGE MOUNTING HEIGHT
WHEN CIRCULATION BELOW
SIGNAGE MOUNTING HEIGHT
ALLOWED WHEN NO
CIRCULATION BELOW
PASSENGER EMERGENCY PHONE
SYSTEM INFORMATION PANELS
SYSTEM INFORMATION PANELS
AT CONCRETE
PAVER, TYP
3
STD-APD360
AT TILE, TYP
SIGNAGE MOUNTING HEIGHT
WHEN CIRCULATION BELOW
SIGNAGE MOUNTING HEIGHT
ALLOWED WHEN NO
CIRCULATION BELOW
CL
T
RA
CK
CL
T
RA
CK
CL
P
LA
TF
OR
M
0 6/2013 NEW - CIVIL, ARCH, SYSTEMS GUIDANCE DWGS
1 8/2019 REVISED - ARCH DIRECTIVE AND STANDARD DWGS
GENERAL NOTES:
1. THIS PLAN INDICATES A PROTOTYPICAL CONFIGURATION
LAYOUT ONLY. SPECIFIC STATION REQUIREMENTS AND
LAYOUTS WILL VARY.
2. REFER TO SOUND TRANSIT CUSTOMER SIGNAGE MANUAL TO
DETERMINE MOUNTING HEIGHTS FOR SYSTEMS INFORMATION
PANELS, PASSENGER EMERGENCY TELEPHONE, AND TRIP
PLANNER.
3. HOSE BIBBS AND OUTLETS AT CENTER KIOSKS TO BE
INCLUDED PER THE REQUIREMENTS OF THE SOUND TRANSIT
DESIGN CRITERIA MANUAL.
SCALE: 3/8" = 1'-0"
PLAN
BETWEEN CAR BARRIER
REGISTERED
ARCHITECT
STATE OF WASHINGTON
JULIE ANNE MONTGOMERY
8073
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
CL PLATFORM CL VEHICLE DOORCL VEHICLE DOOR
PASSENGER
EMERGENCY
PHONE
8'-0
" M
IN
. A
FF
9'-0
" M
IN
. A
FF
No. DATE DSN CHK APP REVISION
SUBMITTED BY: DATE: REVIEWED BY: DATE: DATE:
CONTRACT No.:
FILENAME:
SCALE: DRAWING No.:
SHEET No.: REV:
LIN
E IS
1
" A
T
FU
LL
S
CA
LE
DESIGNED BY:
DRAWN BY:
CHECKED BY:
APPROVED BY:
08
/0
8/1
9 | 1
1:2
8 A
M | G
AL
LA
GH
ER
C
T:\_
HQ
_IN
TE
RN
AL
\E
XH
IB
IT
S\G
UID
AN
CE
-S
TA
ND
AR
D_
DR
AW
IN
GS
- W
OR
KIN
G\A
RC
H-M
EC
H\S
TA
ND
AR
D\D
RA
WIN
GS
\S
TD
-A
PP
27
1.D
WG
STD-APP271
FACILITY ID:
J. PEREZ
C. GALLAGHER
D. POWELL
J. MONTGOMERY
3/8" = 1'-0"
8/2019
SOUND TRANSIT
STANDARD DRAWING
ARCHITECTURAL
INFORMATION KIOSK
AT SIDE PLATFORM
STD-APP271
1
SIGNAGE MOUNTING HEIGHT
WHEN CIRCULATION BELOW
SCALE: 3/8" = 1'-0"
ELEVATION A
-
A
-
2
STD-APD360
3'-0"
TYP
3'-0"
TYP
20'-0" 20'-0"
TACTILE
INFORMATION
PANEL
TACTILE
INFORMATION
PANEL
SYSTEM
INFORMATION
PANELS
TACTILE TRAIN
WAITING AREA
PLATFORM EDGE
DETECTABLE WARNING
SURFACE
TACTILE PATH TACTILE TRAIN
WAITING AREA
SIGNAGE MOUNTING HEIGHT
WHEN CIRCULATION BELOW
SIGNAGE MOUNTING HEIGHT
ALLOWED WHEN NO
CIRCULATION BELOW
PASSENGER
EMERGENCY
PHONE
SYSTEM
INFORMATION
PANELS
2
STD-APD360
AT CONCRETE
PAVER, TYP
3
STD-APD360
AT TILE, TYP
CL
T
RA
CK
2'-0
"
0 6/2013 NEW - CIVIL, ARCH, SYSTEMS GUIDANCE DWGS
1 8/2019 REVISED - ARCH DIRECTIVE AND STANDARD DWGS
GENERAL NOTES:
1. THIS PLAN INDICATES A PROTOTYPICAL
CONFIGURATION LAYOUT ONLY. SPECIFIC STATION
REQUIREMENTS AND LAYOUTS WILL VARY.
2. REFER TO SOUND TRANSIT CUSTOMER SIGNAGE
MANUAL TO DETERMINE MOUNTING HEIGHTS FOR
SYSTEMS INFORMATION PANELS, PASSENGER
EMERGENCY TELEPHONE, AND TRIP PLANNER.
SCALE: 3/8" = 1'-0"
PLAN
BETWEEN CAR
BARRIER
REGISTERED
ARCHITECT
STATE OF WASHINGTON
JULIE ANNE MONTGOMERY
8073
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
WINDSCREEN SECTION
SCALE: 1"=1'-0"
B
-
WINDSCREEN ELEVATION
SCALE: 1"=1'-0"
A
-
4'-0
"4
'-0
"
CL
VA
RIE
S
4" M
IN
B
-
2
-
4
-
6
-
3
-
5
-
1
-
B
-
A
-
EQ
CL CL
CL
CL
CL
CL
VA
RIE
S - S
EE
S
TA
TO
IN
P
LA
N
EQ EQ
VARIES - SEE STATION PLAN
2
-
4
-
CL
CL
CL
VA
RIE
S
4" M
IN
4'-0
"4
'-0
"
SIM
SIM
6
-
CL
A. TYPICAL SECTION B. SECTION AT CURB
BO ROOF
TO FIN FLR
VA
RIE
S
ROOF WHERE
OCCURS
HSS AT HEADER
HSS WHERE
OCCURS
GLAZING
CURTAIN WALL
COLUMN BEHIND
WINDSCREEN
CONCRETE CURB
WHERE OCCURS
PLATFORM
WALKING
SURFACE
COLUMN
BEYOND
COLUMN BEYOND
COLUMN BEYOND
CURTAIN WALL
PLATFORM
WALKING
SURFACE
METAL PANEL
HSS WHERE
OCCURS
CONCRETE CURB
BELOW WHERE
OCCURS
CURTAIN WALL,
TYP
GLAZING, TYP
WIND SCREEN ENLARGED PLAN
SCALE: 1"=1'-0"
1
-
CL
DIM POINT
1/4
"
AL
IG
N
CL
1/4"
ALIGN
CL
CL
EQ EQ
DIM POINT
CL
AL
IG
N
COLUMN BEYOND
HHS
HHS BRACED
BACK TO COLUMN
BEYOND
BACKER ROD AND
SEALANT, TYP
ISOLATION MATERIAL
ISOLATION MATERIAL
GLAZING
BACKER ROD AND
SEALANT, TYP
CURTAIN WALL
ISOLATION MATERIAL
DIM POINT
GL-2
DIM POINT
CURTAIN WALL
GLAZING
CURTAIN WALL
GLAZING
GLAZING
CURTAIN WALL
GLAZING
CONCRETE CURB
EPOXY SET
ANCHOR PER MFR
GLAZING
CURTAIN WALL
ISOLATION PAD
SHIM, W/ SEALANT &
BACKER ROD
METAL
PANEL
No. DATE DSN CHK APP REVISION
SUBMITTED BY: DATE: REVIEWED BY: DATE: DATE:
CONTRACT No.:
FILENAME:
SCALE: DRAWING No.:
SHEET No.: REV:
LIN
E IS
1
" A
T
FU
LL
S
CA
LE
DESIGNED BY:
DRAWN BY:
CHECKED BY:
APPROVED BY:
08
/0
8/1
9 | 1
1:2
1 A
M | G
AL
LA
GH
ER
C
T:\_
HQ
_IN
TE
RN
AL
\E
XH
IB
IT
S\G
UID
AN
CE
-S
TA
ND
AR
D_
DR
AW
IN
GS
- W
OR
KIN
G\A
RC
H-M
EC
H\S
TA
ND
AR
D\D
RA
WIN
GS
\S
TD
-A
DD
28
0.D
WG
STD-ADD280
FACILITY ID:
J. PEREZ
C. GALLAGHER
D. POWELL
J. MONTGOMERY
AS NOTED
8/2019
SOUND TRANSIT
STANDARD DRAWING
ARCHITECTURAL
WINDSCREENS
AT CENTER PLATFORM
STD-ADD280
0
CORNER MULLION
SCALE: 6"=1'-0"
6
-
SILL @ CONCRETE CURB
SCALE: 6"=1'-0"
7
-
INTERMEDIATE VERTICAL MULLION
SCALE: 6"=1'-0"
4
-
END MULLION
SCALE: 6"=1'-0"
2
-
INTERMEDIATE HORIZONTAL MULLION
SCALE: 6"=1'-0"
5
-
WINDSCREEN HEADER
SCALE: 6"=1'-0"
3
-
0 8/2019 NEW - ARCH DIRECTIVE AND STANDARD DWGS
REGISTERED
ARCHITECT
STATE OF WASHINGTON
JULIE ANNE MONTGOMERY
8073
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
FIN FLR
8'-0"
2'-10"
EQ EQ
6"
6"
6"
6"
2'-10"
VARIES
VA
RIE
S
OPNG PER PLANS
BO CEILING
FIN FLR
8'-0"
BO CEILING
EQ EQ
EQ EQ EQ
EQ
EQ
EQ
RECESSED LIGHTING, TYP
SPEAKER
1/8" GAPS. TYP
FINISHED SST CEILING
ACCESS PANEL
SECURITY CAMERA
HANDRAIL PER MFR
EPOXY FLOORING
ELEV DOOR JAMB
CAR OPERATING
PANELS
METAL PANEL
SATIN SST BASE
SST HANDRAIL
(1 1/4" MIN /
1 1/2" MAX DIA)
ALIGN MULLION WITH
EXTERIOR MULLION
SST HANDRAIL (1 1/4"
MIN/ 1 1/2" MAX DIA)
LAMINATED TEMPERED
GLAZING, TYP
SATIN SST BASE
4'-0" M
AX
35" M
IN
48" M
AX
FIN FLR
8'-0"
BO CEILING
FIN FLR
8'-0"
BO CEILING
METAL PANEL
GLAZING
CAR POSITION INDICATOR
CAR OPERATING PANEL
COMMUNICATION
SYSTEM
ELEVATOR CONTROL
PANEL BUTTONS, CAB
ALARM, EMERGENCY
STOP BUTTONS
SST BASE
GLAZING VARIES
ELEVATOR CALL
BUTTONS (PANEL)
CL
AL
IG
N
1/2
"
TY
P
1 1/2"
ALL EXPOSED EDGES
SHALL BE FINISHED WITH
FACE MATERIAL, TYP
METAL PANEL, TYP
FINISHED CEILING. ALL
EXPOSED EDGES SHALL
BE FINISHED WITH FACE
MATERIAL.
SST HANDRAIL (1-1/4"
MIN / 1-1/2" MAX DIA)
SST BASE
FINISHED FLOOR
No. DATE DSN CHK APP REVISION
SUBMITTED BY: DATE: REVIEWED BY: DATE: DATE:
CONTRACT No.:
FILENAME:
SCALE: DRAWING No.:
SHEET No.: REV:
LIN
E IS
1
" A
T
FU
LL
S
CA
LE
DESIGNED BY:
DRAWN BY:
CHECKED BY:
APPROVED BY:
08
/0
8/1
9 | 1
1:0
7 A
M | G
AL
LA
GH
ER
C
T:\_
HQ
_IN
TE
RN
AL
\E
XH
IB
IT
S\G
UID
AN
CE
-S
TA
ND
AR
D_
DR
AW
IN
GS
- W
OR
KIN
G\A
RC
H-M
EC
H\S
TA
ND
AR
D\D
RA
WIN
GS
\S
TD
-A
VD
22
8.D
WG
STD-AVD228
FACILITY ID:
J. PEREZ
C. GALLAGHER
D. POWELL
J. MONTGOMERY
AS NOTED
8/2019
SOUND TRANSIT
STANDARD DRAWING
ARCHITECTURAL
ELEVATORS CABS
WITH GLAZING AT SIDES
STD-AVD228
0
INTERIOR ELEVATION - METAL PANEL
SCALE: 1/2"=1'-0"
A
-
INTERIOR ELEVATION - GLAZING
SCALE: 1/2"=1'-0"
B
-
INTERIOR ELEVATION - DOORS
SCALE: 1/2"=1'-0"
C
-
EXTERIOR ELEVATION - DOORS
SCALE: 1/2"=1'-0"
D
-
SECTION - INTERIOR CABS
SCALE: 1 1/2"=1'-0"
E
-
B
-
B
-
A
-
C
-
E
-
0 8/2019 NEW - ARCH DIRECTIVE AND STANDARD DWGS
D
-
ENLARGED PLAN
SCALE: 1/2" = 1'-0"
1
-
ENLARGED RCP
SCALE: 1/2" = 1'-0"
2
-
REGISTERED
ARCHITECT
STATE OF WASHINGTON
JULIE ANNE MONTGOMERY
8073
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
TICKETS
TICKETS
2'-4" MIN
DISTANCE TO SIDE WALL
TVM
UNIT
TVM
UNIT
4'-0" OR 8'-0" TYP
REFER TO PLANS
48"
30
"
2'-11 3/8"
VARIES
1'-6
1
/2
"
VA
RIE
S
R
2
'
-
1
1
5
/
8
"
1 1
/4
"
3'-0"
UNIT DIM
SEE DETAIL A
CL TVM UNIT
CL
CL TVM UNIT
5'-7
5
/8
"
VE
RIF
Y
1" MIN CLR
TYP
1" MIN CLR
TYP
1" M
IN
C
LR
TY
P
UN
IT
D
IM
VA
RIE
S
CL
No. DATE DSN CHK APP REVISION
SUBMITTED BY: DATE: REVIEWED BY: DATE: DATE:
CONTRACT No.:
FILENAME:
SCALE: DRAWING No.:
SHEET No.: REV:
LIN
E IS
1
" A
T
FU
LL
S
CA
LE
DESIGNED BY:
DRAWN BY:
CHECKED BY:
APPROVED BY:
08
/0
8/1
9 | 1
1:2
8 A
M | G
AL
LA
GH
ER
C
T:\_
HQ
_IN
TE
RN
AL
\E
XH
IB
IT
S\G
UID
AN
CE
-S
TA
ND
AR
D_
DR
AW
IN
GS
- W
OR
KIN
G\A
RC
H-M
EC
H\S
TA
ND
AR
D\D
RA
WIN
GS
\S
TD
-A
SD
30
1.D
WG
STD-ASD301
FACILITY ID:
J. PEREZ
C. GALLAGHER
D. POWELL
J. MONTGOMERY
1" = 1'-0"
8/2019
SOUND TRANSIT
STANDARD DRAWING
ARCHITECTURAL
TICKET VENDING MACHINE
AND SMART CARD READERS
STD-ASD301
0
SCALE: 1" = 1'-0"
CARD READER MOUNTING DETAIL 1
-
SCALE: 1" = 1'-0"
TVM - SECTION A
- SCALE: 1" = 1'-0"
TVM - ELEVATION B
-
GUD-APP211
GUD-APP212
A
-
DASHED LINE INDICATES FUTURE
MOUNTING PLATE AND CARD
READER SUPPORT
KNOCKOUT SLAB
CONSTRUCTION
JOINT
CONCRETE "FARE PAID ZONE"
FINISH
STRUCTURAL SLAB (REFER TO
STRUCTURAL DRAWINGS)
CONDUIT PER MANUFACTURER'S
SPECIFICATION (REFER TO
SYSTEMS GUIDANCE DRAWING)
EMBEDDED 18" SQ STEEL PLATE
2 1
/2
"
OUTLINE OF EQUIPMENT AND
OPENING CLEARANCE
OUTLINE OF ADA
PARALLEL APPROACH
GASKETED ENCLOSURE, FLUSH
WITH FINISH SURFACE. REFER
TO ELECTRICAL STD. DRAWINGS
OUTLINE OF LEVEL TVM
CONCRETE PEDESTAL BASE
TVM UNIT
PROVIDE COVER PLATE, FLUSH
TO FINISH FLOOR AT FUTURE TVM
LOCATIONS
FLOOR FINISH AS SCHEDULED
GASKETED ENCLOSURE PER
SYSTEM REQUIREMENTS,
CAST INTO CONCRETE BASE
COORDINATE WITH SOUND
TRANSIT SIGNAGE STANDARDS
ADDITIONAL TVM,
WHERE OCCURS
TVM UNIT
1" MIN CLR
TYP
1" M
IN
C
LR
TY
P
1" MIN CLR
TYP
1" M
IN
C
LR
TY
P
FACE OF WALL FINISH, TYP
FINISH FLOOR
WHERE OCCURS
GENERAL NOTES:
1. ALL INSTALLATIONS SHALL COMPLY WITH THE
NATIONAL ELECTRICAL CODE (NEC), CURRENT
EDITION AND THE WASHINGTON STATE ELECTRICAL
CODE.
2. TICKET VENDING MACHINE (TVM), AND FLEXIBLE
CONDUIT SHALL BE COORDINATED W/FINAL
DESIGNERS AND SYSTEMS.
3. REFER TO SYSTEMS DRAWINGS FOR FINAL CONDUIT
LAYOUT AND DIMENSIONS. CONDUITS SHOWN, WHERE
APPLICABLE, ARE PRELIMINARY.
4. THE ORIENTATION AND LOCATION OF JUNCTION
BOXES AND CONDUIT STUB OUTS SHALL BE
CONFIRMED WITH SYSTEMS.
5. CONDUIT SIZES AND BEND RADIUS WITH TVM
MANUFACTURER SHALL BE VERIFIED BY SYSTEM
ENGINEERS.
6. TVM DIMENSIONS ARE BASED ON SCHEIDT &
BACHMANN SPECIFICATION. CONFIRM FINAL TVM
DIMENSIONS WITH SOUND TRANSIT.
SCALE: 1" = 1'-0"
TYPICAL TVM PLAN
B
-
SCALE: 1" = 1'-0"
ENLARGED PLAN - TVM 2
-
0 8/2019 NEW - ARCH DIRECTIVE AND STANDARD DWGS
REGISTERED
ARCHITECT
STATE OF WASHINGTON
JULIE ANNE MONTGOMERY
8073
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
MANUFACTURER
3'-5"
FEC
FEC
FINISH FLOOR
SEE MOUNTING DETAILS
B/A-01-305 AND C/A-01-305
AS APPLICABLE
No. DATE DSN CHK APP REVISION
SUBMITTED BY: DATE: REVIEWED BY: DATE: DATE:
CONTRACT No.:
FILENAME:
SCALE: DRAWING No.:
SHEET No.: REV:
LIN
E IS
1
" A
T
FU
LL
S
CA
LE
DESIGNED BY:
DRAWN BY:
CHECKED BY:
APPROVED BY:
08
/0
8/1
9 | 1
1:2
7 A
M | G
AL
LA
GH
ER
C
T:\_
HQ
_IN
TE
RN
AL
\E
XH
IB
IT
S\G
UID
AN
CE
-S
TA
ND
AR
D_
DR
AW
IN
GS
- W
OR
KIN
G\A
RC
H-M
EC
H\S
TA
ND
AR
D\D
RA
WIN
GS
\S
TD
-A
SD
30
5.D
WG
STD-ASD305
FACILITY ID:
CL DOOR & SIGN
6"
CL SIGN
3'-0
"
4'-6
"
FINISH FLOOR
AL
IG
N
VA
RIE
S P
ER
M
FR
RE
CE
SS
P
ER
C
MU
M
OD
UL
E
PARTITION
AS SCHEDULED
VA
RIE
S P
ER
M
FR
FINISHED FLOOR
4'-0
"
FINISH FLOOR
2 1/2"
2 1
/2
"
4'-0
"
J. PEREZ
C. GALLAGHER
D. POWELL
J. MONTGOMERY
AS NOTED
8/2019
SOUND TRANSIT
STANDARD DRAWING
ARCHITECTURAL
EQUIPMENT MOUNTING
ELEVATIONS AND DETAILS
STD-ASD305
0
ROUND SST CAP, WELD
AND GROUND SMOOTH
SPEAKER/BEACON MODULE AND
CONNECTION TO POST PER
FIXTURE MFR
FIXTURE PER SCHEDULE, BOX AND
CONNECTION TO POST PER
FIXTURE MFR
HOLES FOR CIRCUIT
METAL PANEL AS SCHEDULED
BEZEL PER FIXTURE MFR
COUNTERSUNK #10 FLATHEAD
TAMPERPROOF SCREWS, TYP OF (6)
BACKER BOX PER FIXTURE MFR
RECESSED EQUIPMENT OR
DEVICE AS SCHEDULED
FINISH WHERE SCHEDULED
INSULATED GROUNDING TYPE
CONDUIT BUSHING WITH KNOCKOUT
CONDUIT AS REQUIRED (DASHED)
WALL ASSEMBLY AS SCHEDULED
FINISH PER FINISH SCHEDULE,
WHERE OCCURS
EQUIPMENT AS SCHEDULED
CMU PARTITION AS SCHEDULED
(OPTION: USE RATED CABINET)
EQUIPMENT AS SCHEDULED
METAL PANEL WITH STIFFENER
OPENING SURROUND
BEZEL PER FIXTURE MFR
COUNTERSUNK #10 FLATHEAD
TAMPERPROOF SCREWS, TYP OF (6)
BACKER BOX PER FIXTURE MFR
UNISTRUT FRAME SUPPORTING
FIXTURE BACKER BOX SECURED TO
CONC SLAB BELOW
INSULATED GROUNDING TYPE
CONDUIT BUSHING WITH KNOCKOUT
CONDUIT AS REQUIRED (DASHED)
COORDINATE SIZE AND
PLACEMENT OF OPENING FOR
EQUIPMENT IN METAL PANEL
FINISH PER FINISH
SCHEDULE, WHERE OCCURS
RECESSED EQUIPMENT OR DEVICE
METAL BLOCKING AS REQUIRED
ROOM IDENTIFICATION SIGN
ALTERNATE LOCATION 1
ROOM IDENTIFICATION SIGN
ALTERNATE LOCATION 2
ACCESS CARD READER,
SEE DOOR SCHEDULE &
SYSTEMS DWGS
ROUND SST CAP, WELD
AND GROUND SMOOTH
FIXTURE PER SCHEDULE, BOX
AND CONNECTION TO POST PER
FIXTURE MFR
HOLES FOR CIRCUIT
3 1/2" DIA SST POST, 11 GA
1/4" SST KNIFE PLATE, TYP OF (4)
HOLES FOR CONDUIT EMBEDS
3/8" X 12" DIA SST BASE PLATE
1/2" DIA WEDGE ANCHOR
FIELD BOLTS, TYP OF (4)
R.O
.
VA
RIE
S
INSULATION WHERE OCCURS
0 8/2019 NEW - ARCH DIRECTIVE AND STANDARD DWGS
PLAN
ELEVATION
PLAN
ELEVATION
1/4" SST KNIFE PLATE, TYP OF (4)
HOLES FOR CONDUIT EMBEDS
3/8" X 12" DIA SST BASE PLATE
1/2" DIA WEDGE ANCHOR
FIELD BOLTS, TYP OF (4)
3 1/2" DIA SST POST, 11 GA
SCALE: 1" = 1'-0"
POST MOUNTED FIXTURE DETAIL 3
- SCALE: 3" = 1'-0"
RECESSED EQPM PLAN DETAIL @ MTL PANEL
4
- SCALE: 1" = 1'-0"
RECESSED EQPM SECTION @ STUD WALL
C
- SCALE: 1" = 1'-0"
TYPICAL MOUNTING HEIGHTS 5
-
SCALE: 1/2" = 1'-0"
TYPICAL SIGNAGE AT DOORWAYS 2
-SCALE: 1" = 1'-0"
RECESSED EQPM SECTION @ CMU WALL
B
-SCALE: 1" = 1'-0"
RECESSED EQPM SECTION
@ METAL PANEL
A
-SCALE: 1" = 1'-0"
POST MOUNTED FIXTURE DETAIL WITH SPEAKER 1
-
REGISTERED
ARCHITECT
STATE OF WASHINGTON
JULIE ANNE MONTGOMERY
8073
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
FACE OF WALL
3'-0"
8 1/2"
2'-8"
CLR
PLATFORM EDGE
2"
HSS FRAME
6"
EQEQ
CL
CL
CL
CL
STL STRIKE PLATE
ACR - FLUSH MOUNT
TO INFILL PANEL &
CONCEAL CONDUIT
IN FRAME
PERFORATED INFILL
PANELS WITH 1 1/2"
NON-PERF BORDER
CONT ANGLE AROUND
EDGE OF PERFORATED
INFILL PANEL SERVICE
SIDE
SERVICE SIDE
1"
PUBLIC SIDE
2 1/2"
2" 2"
2"
2"
8"
HINGE
1"x1" CONT ANGLE
AROUND METAL
PANELS W/ TAMPER
PROOF FASTENERS
FACE OF WALL
2 1/2"
CONDUIT FOR ELEC AT
STRIKE JAMB
BASE PLATE BELOW, TYP
ELECTRIC LOCK,
COORDINATE W/
STRIKE PLATE
ROUTE FLEX CONDUIT UP TO LATCH THRU
HSS, WHERE OCCURS
DRILLED HOLE FOR CONDUIT, WHERE OCCURS
3/8" BASE PLATE WELDED TO FRAME
J-BOX BELOW BASE PLATE, WHERE OCCURS
EDGE OF PLATFORM
SHIM & GROUT AS REQUIRED
HSS POST
EPOXY ANCHOR
2"x2"x5/16" HSS
(4) 5/8" EPOXY ANCHOR
3/8" STL BASE PLATE WELDED TO POST
2"x2"x5/16" HSS, TYP
STRIKE PLATE
EDGE OF
PLATFORM
NOTE: REFER TO 6/GUD-ATD325
FOR GATE POST BASE DETAILS.
METAL INFILL PANELS
W/ 1 1/2" NON-PERF
BORDER
CL
CL CL
CL CL
CL
CL
No. DATE DSN CHK APP REVISION
SUBMITTED BY: DATE: REVIEWED BY: DATE: DATE:
CONTRACT No.:
FILENAME:
SCALE: DRAWING No.:
SHEET No.: REV:
LIN
E IS
1
" A
T
FU
LL
S
CA
LE
DESIGNED BY:
DRAWN BY:
CHECKED BY:
APPROVED BY:
08
/0
8/1
9 | 1
1:2
5 A
M | G
AL
LA
GH
ER
C
T:\_
HQ
_IN
TE
RN
AL
\E
XH
IB
IT
S\G
UID
AN
CE
-S
TA
ND
AR
D_
DR
AW
IN
GS
- W
OR
KIN
G\A
RC
H-M
EC
H\S
TA
ND
AR
D\D
RA
WIN
GS
\S
TD
-A
TD
32
5.D
WG
STD-ATD325
FACILITY ID:
J. PEREZ
C. GALLAGHER
D. POWELL
J. MONTGOMERY
AS NOTED
8/2019
SOUND TRANSIT
STANDARD DRAWING
ARCHITECTURAL
EXIT STAIR
DETAILS
STD-ATD325
0
HANDRAIL BRACKET @ GUARDRAIL
SCALE: 6"=1'-0"
7
-
NOTE:
WALL BRACKET SHOWN.
VERIFY BRACKET AT
GUARDRAILS WITH DETAILS.
2'-0" MAX.
EQ. EQ.
34
" M
IN
38
" M
AX
1
2
"
M
A
X
1'-0"
1 1
/2
" M
IN
1/8
" T
O F
.O
.
WA
LL
O
R
GU
AR
DR
AIL
R
=
3
"T
Y
P
FINISH FLOOR
4"
3"
MIN
5 1
/2
"
TY
P
3'-6
"
4"
MAX
FINISH FLOOR
1 1/2"
MIN
1
1
/4
"
3/4"
15°
1 1/2" MIN
3'-0
"
3 3/4"
VARIES
SEE PLAN
3'-6
"
3 3/4"
4"
MA
X
OPP
3'-0
"
3'-6
"
3'-0
"
7
-
OPP
7
-
PLATFORM GATE HINGE & JAMB DETAIL
SCALE: 1"=1'-0"
2
-
2
-
0 8/2019 NEW - ARCH DIRECTIVE AND STANDARD DWGS
SECTION
PLAN
PLAN
SECTION
PLAN VIEW
SIDE VIEW END VIEW
ELEVATION ELEVATION
PLAN AT
WALL RETURN
RAILING DOWN
HORIZONTAL
RAILING UP
CONT RAILING RAD
CORNERS, TYP
MITERED CORNERS
WHERE OCCURS
METAL INFILL END,
GRIND SMOOTH
HANDRAIL, VERIFY TYPE W/
DETAIL & SPECIFICATIONS
RAILING WALL BRACKET MAX
SPACING @ 6'-0" O.C. UON. VERIFY
BRACKET TYPE WITH DETAILS
PROVIDE BLOCKING @
STUD WALL CONST.
RAILING WALL BRACKET, TYP
1 1/2" O.D. PAINTED HANDRAIL
SHAPED BRACKET SADDLE WITH
COUNTERSUNK FASTENERS,
PAINT TYP
1/4" PLATE BRACKET WELDED TO
VERTICAL BAR & HANDRAIL
GUARDRAIL VERTICAL AS SCHEDULED
1 1/2" O.D. STEEL
PIPE HANDRAIL
1 1/2" O.D. STEEL POST,
TYP
PLATE AND EMBEDDED
ANCHOR. (SEE
STRUCTURAL DWGS)
1 1/2" O.D. STEEL
PIPE HANDRAIL
1 1/2" O.D. PAINTED
STEEL PIPE, TYP
1 1/2" O.D. PAINTED
STEEL PIPE, TYP
TREAD / LANDING
WELD VERTICAL POST
TO STRINGER
STEEL STRINGER BY
STAIR MFR
1 1/2" O.D. PAINTED STEEL
PIPE GATE FRAME
SELF CLOSING
GATE HINGE
HANDRAIL AS SCHEDULED
CAST METAL WALL BRACKET -
SPACE AS REQ.
3/8" TOGGLE BOLTS @ GWB; 3/8" DIA
BOLTS W/ EXP. BOLT @ CONC, 2 1/4"
MIN EMBED (NOT SHOWN)
METAL BLOCKING
WALL AS SCHEDULED
PLATFORM END GATE ELEVATION
SCALE: 1"=1'-0"
A
-
HANDRAIL TRANSITIONS
SCALE: 1"=1'-0"
1
-
HANDRAIL DETAILS
SCALE: 1"=1'-0"
3
-
GUARDRAIL @ CONCRETE FLOOR SLAB
SCALE: 1"=1'-0"
4
- SCALE: 1 1/2" = 1'-0"
TYPICAL GUARDRAIL @ NON PUBLIC STAIR
5
-
SCALE: 1" = 1'-0"
PLATFORM END GATE POST BASE DETAIL 6
-
HANDRAIL BRACKET @ WALL
SCALE: 6"=1'-0"
8
-
SCALE: 1" = 1'-0"
TYPICAL EXIT STAIR BARRIER GATE9
-
REGISTERED
ARCHITECT
STATE OF WASHINGTON
JULIE ANNE MONTGOMERY
8073
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
7"
1'-0
"
TY
P
1'-0
"
1'-9 1/4" 8"
4'-0
" A
FF
TYP
3/16"
TYP
3/16"
FIN FLR
LIGHT SWITCH
LOCATED 48" AFF
FRONT WALL
STL BAR
1-1/2" X 1/4" X L
SIDE WALL
SUB-SILL FOR
ELEVATOR DOOR
BY ELEV MFR
3/4" DIA ROD
RUNGS. COAT
WHOLE RUNG
W/ NON-SLIP
COATING, TYP
BENT PLATE
10 X 2-1/2" X 1/4"
1/2" DIA X 2-3/4"
SLEEVE ANCHOR
AS REQD
BENT PLATE
2-1/2" X 6 X 1/4"
2 1
/2
"
MIN
EQ EQ
2"
MIN
7"
EQ
EQ
CL
CL
CL
FLOOR LEVEL TACTILE
SIGN AND SYMBOLS
MOUNTED ON BOTH
JAMBS - SEE ANSI 703.3
ELEVATOR INTERNAL
HALL LANTERN / LOBBY
POSITION INDICATOR
MOUNTED IN JAMB
SST ELEVATOR FRAME
BEYOND
SST ELEVATOR DOOR
SST ELEVATOR FRAME
STAR OF LIFE SIGN /
SYMBOL
1'-6
"
1'-6"
GALV METAL GRATING COVER
FOR SUMP PIT (INSTALL
FLUSH W/ PIT FLOOR)
SEE STRUCTURAL FOR
GRATING SUPPORT
NOTE:
1. SEE ELEVATOR PIT PLANS FOR
LOCATION
2. PROVIDE INDIRECT DRAIN WITH
MINIMUM 50GPM DRAINAGE
CAPACITY TO REMOTE SUMP.
No. DATE DSN CHK APP REVISION
SUBMITTED BY: DATE: REVIEWED BY: DATE: DATE:
CONTRACT No.:
FILENAME:
SCALE: DRAWING No.:
SHEET No.: REV:
LIN
E IS
1
" A
T
FU
LL
S
CA
LE
DESIGNED BY:
DRAWN BY:
CHECKED BY:
APPROVED BY:
08
/0
8/1
9 | 1
1:1
0 A
M | G
AL
LA
GH
ER
C
T:\_
HQ
_IN
TE
RN
AL
\E
XH
IB
IT
S\G
UID
AN
CE
-S
TA
ND
AR
D_
DR
AW
IN
GS
- W
OR
KIN
G\A
RC
H-M
EC
H\S
TA
ND
AR
D\D
RA
WIN
GS
\S
TD
-A
VD
34
0.D
WG
STD-AVD340
FACILITY ID:
J. PEREZ
C. GALLAGHER
D. POWELL
J. MONTGOMERY
AS NOTED
8/2019
SOUND TRANSIT
STANDARD DRAWING
ARCHITECTURAL
ELEVATOR
DETAILS
STD-AVD340
0
0 8/2019 NEW - ARCH DIRECTIVE AND STANDARD DWGS
SECTION ELEVATION
SCALE: 3/4" = 1'-0"
ELEVATOR PIT LADDER1
- SCALE: 3/4" = 1'-0"
ELEVATOR SUMP PIT SECTIONA
- SCALE: 3" = 1'-0"
ELEVATOR FLOOR INDICATORS2
-
REGISTERED
ARCHITECT
STATE OF WASHINGTON
JULIE ANNE MONTGOMERY
8073
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
EQ EQ
7"
11" 6"
17" - 25" CLR
2'-3"
2'-10"
5"
9"
FIN FLR
10" M
AX
TA-9
TA-6B
TA-6A
TA-1
TA-5
TA-8A
TA-3
TA-4
TA-3
LAV
TA-6C
WC
16"-18"
1'-3"
5'-0"
5'-0
"
1'-0
"
CLEAR AREA
30"x48"
1'-4
" T
YP
1ꞌ-6
" A
CC
WC TA-6
FIN FLR
4'-0
"
TA-8A MH
1'-5
"
MA
X
UR
2'-1
1"
3'-4
"1
'-6
"
3'-4"
3'-6"
4'-6"
2'-1
1"
TA-1
1'-6
"
MIN
1 1
/2
"
TA-12
4'-0
"
TA-11TA-9
TA-1A
1'-6
"
MIN
1 1
/2
"
2'- 6
" A
CC
TA-5
3'-6
"
TA-7
4'- 4
" T
YP
3'-4
" M
AX
B
O
RE
FL
EC
TIV
E
SU
RF
AC
E
TA-4TA-3 TA-3A
3'-6
"
TO
OP
ER
AB
LE
PA
RT
TA-4A
3'-6
"
TA-7A
FIN FLR
3'-6
"
TO
OP
ER
AB
LE
PA
RT
3'-4
" M
AX
B
O
RE
FL
EC
TIV
E
SU
RF
AC
E
4'-0
"
4'-4
" T
YP
2'-6
" A
CC
24
"- 3
6"
1'-0"
1'-0"B.O. GRAB
BAR
B.O. GRAB
BAR
GRAB BAR
CLEARANCE
TA-6A
BACK WALL
TA-6B
SIDE WALL
TA-6C
WC
No. DATE DSN CHK APP REVISION
SUBMITTED BY: DATE: REVIEWED BY: DATE: DATE:
CONTRACT No.:
FILENAME:
SCALE: DRAWING No.:
SHEET No.: REV:
LIN
E IS
1
" A
T
FU
LL
S
CA
LE
DESIGNED BY:
DRAWN BY:
CHECKED BY:
APPROVED BY:
08
/0
8/1
9 | 1
1:2
0 A
M | G
AL
LA
GH
ER
C
T:\_
HQ
_IN
TE
RN
AL
\E
XH
IB
IT
S\G
UID
AN
CE
-S
TA
ND
AR
D_
DR
AW
IN
GS
- W
OR
KIN
G\A
RC
H-M
EC
H\S
TA
ND
AR
D\D
RA
WIN
GS
\S
TD
-A
ID
37
0.D
WG
STD-AID370
FACILITY ID:
J. PEREZ
C. GALLAGHER
D. POWELL
J. MONTGOMERY
AS NOTED
8/2019
SOUND TRANSIT
STANDARD DRAWING
ARCHITECTURAL
TOILET ACCESSORIES
STD-AID370
0
0 8/2019 NEW - ARCH DIRECTIVE AND STANDARD DWGS
TOILET ACCESSORIES LEGEND
ACCESSORY DESCRIPTION COMMENTS
TA-1 TOILET PAPER DISPENSER
TA-1A TOILET PAPER DISPENSERAT PUBLIC RESTROOM, VANDAL RESISTANT
TA-2(NOT USED)
TA-3 SOAP DISPENSER
TA-3A SOAP DISPENSERAT PUBLIC RESTROOM, VANDAL RESISTANT
TA-4 MIRRORS
TA-4A MIRRORSAT PUBLIC RESTROOM, VANDAL RESISTANT
TA-5 SEAT COVER DISPENSER
TA-6 GRAB BARS
TA-7 SURFACE-MOUNTED ELECTRONIC HAND DRYER
TA-7A SEMI RECESSED ELECTRIC HAND DRYERAT PUBLIC RESTROOM, VANDAL RESISTANT
TA-8A CLOTHES HOOKAT PUBLIC RESTROOM, VANDAL RESISTANT
TA-9 SANITARY NAPKIN RECEPTICLE UNIT
TA-10 UNDERSINK ANTI-BURN PROTECTION
TA-11 SURFACE MOUNTED WASTE RECEPTICLE
TA-12 COMBINATION SANITARY NAPKIN/ TAMPON VENDOR
MH COMBINATION UTILITY SHELF/MOP AND BROOM HOLDER
GENERAL NOTES:
1. FIXTURES AND ACCESSORIES ARE GENERIC FOR ALL PROJECTS. REFER TO
PLANS, DETAILS, AND SPECIFICATIONS FOR PROJECT REQUIREMENTS.
2. ACC = ACCESSIBLE
3. FOIC, NOTED AS APPLICABLE
4. ALL PUBLIC RESTROOM ACCESSORIES TO HAVE SST FINISH.
SCALE: 1/2" = 1'-0"
PLAN
SCALE: 1/4" = 1'-0"
TYPICAL MOUNTING HEIGHTS
SCALE: 1/2" = 1'-0"
TYPICAL ELEVATION A
- SCALE: 1/2" = 1'-0"
TYPICAL ELEVATION B
-
CL
2'-0"
SCALE: 1/2" = 1'-0"
TYPICAL ELEVATION C
- SCALE: 1/2" = 1'-0"
TYPICAL DOOR ELEVATION D
-
A
D
C
B
--
REGISTERED
ARCHITECT
STATE OF WASHINGTON
JULIE ANNE MONTGOMERY
8073
unco
ntro
lled
docu
men
t fro
m so
undt
rans
it.or
g
6'-4"
No. DATE DSN CHK APP REVISION
SUBMITTED BY: DATE: REVIEWED BY: DATE: DATE:
CONTRACT No.:
FILENAME:
SCALE: DRAWING No.:
SHEET No.: REV:
LIN
E IS
1
" A
T
FU
LL
S
CA
LE
DESIGNED BY:
DRAWN BY:
CHECKED BY:
APPROVED BY:
08
/0
8/1
9 | 1
1:1
8 A
M | G
AL
LA
GH
ER
C
T:\_
HQ
_IN
TE
RN
AL
\E
XH
IB
IT
S\G
UID
AN
CE
-S
TA
ND
AR
D_
DR
AW
IN
GS
- W
OR
KIN
G\A
RC
H-M
EC
H\S
TA
ND
AR
D\D
RA
WIN
GS
\S
TD
-A
ND
50
0.D
WG
STD-AND500
FACILITY ID:
J. PEREZ
C. GALLAGHER
D. POWELL
J. MONTGOMERY
NTS
8/2019
SOUND TRANSIT
STANDARD DRAWING
ARCHITECTURAL
SIGNAGE TYPES
STD-AND500
0
PRIMARY LINK
A1
NO VERTICAL POST- ATTACH
DIRECTLY TO CW MULLION
A4
9'-0
"
17
'-0
"
3'-7"
DIM POINT
MAJOR FASCIAA6
MAJOR PENDANT
A7
8'-0" MIN AFF,
9'-0" AFF WITH
CIRCULATION
BELOW
8'-2"
1'-4
"
VA
RIE
S
6'-0"
DIM POINT
MINOR FASCIAA8
MINOR PENDANTA9
6'-4"
8'-0" MIN AFF,
9'-0" AFF WITH
CIRCULATION
BELOW
1'-2
"
VA
RIE
S
4'-9"
DIM POINT
PENDANT DOUBLE SIDED
B2
FASCIA MOUNT
B3
PENDANT SINGLE SIDEDB1
8'-0" MIN AFF,
9'-0" AFF WITH
CIRCULATION
BELOW
1'-2
"
4'-9"
VA
RIE
S
OCS POLE
B4
POLE
B5
DIM POINT
9'-0" MIN AFF
6'-4"
1'-2
"
SOUND TRANSIT STATION CODESTA =
SIGN TYPEF2.A =
INDICATION OF PRIMARY SIGN FACE=
INDICATION OF SECONDARY SIGN FACE
=
MOUNTING DETAIL1/L200-AND901 =
SIGNAGE TAG =
UNIQUE LOCATION #XXX =
STA F2.A XXX 01/L200-AND101
C1.A STATION ENTRANCE (4 PANELS)
C6.D BICYCLE PARKING (1 PANEL)
C6.E DIRECTIONAL (1 PANEL)
C6.F BUS SCHEDULE (1 PANEL)
C1.B CENTER PLATFORM (4 PANELS)
C1.C 1/4 AND 3/4 PLATFORM (2 PANELS)
C6 FLEXIBLE CONTENT (1 PANEL)
1"
TYP
3'-1
0"
1'-7"
TYP
2'-0" AFF
DIM POINT
2'-0
"3
'-1
0"
3'-9"
1/4 AND 3/4 PLATFORMC2.C
DOUBLE SIDED; 1/4 AND 3/4
PLATFORM
C3.C
AS
N
OT
ED
6'-4"
D1
PENDANT SINGLE SIDED (DEPTH = 1'-2")
D2
PENDANT DOUBLE SIDED (DEPTH = 1'-2")
D3
FASCIA MOUNT (DEPTH = 1'-2")
D5
PENDANT DOUBLE SIDED (DEPTH = 1'-7")
D4
PENDANT SINGLE SIDED (DEPTH = 1'-7")
AT FASCIA: 8'-0" MIN
AFF, 9'-0" AFF WITH
CIRCULATION BELOW
AT PENDANTS: 9'-0" MIN
AFF
DIM POINT
VA
RIE
S
4'-9"
MEDIUMD14
4'-0
"2
'-4
"
1'-5"
ST PARATRANSITE3
10
'-2
"
7'-9
"
1'-10 3/8"
9'-0" MIN AFF
DIM POINT
1'-0
"
1'-0 1/16"
F1.D
F1.J ELEVATOR
BICYCLE STORAGE
F1.K EMERGENCY PHONE
INFORMATION
F1.B
TICKETS & ORCA
F1.C
1'-0
"
F2.K EMERGENCY PHONE
TICKETS & ORCAF2.C
F2.J ACCESSIBLE ELEVATOR
DIM POINT
8'-0" MIN AFF,
9'-0" WITH
CIRCULATION
BELOW
1'-0
"
8"
TACTILE IDF3.A
FACILITY HOURS STATIONF4.A
FACILITY HOURS GARAGEF4.B
4'-0" AFF
DIM POINT
2'-6" AFF
DIM POINT
1'-6"
1'-0
"
BIKE LOCKERSF5
9'-0" AFF
DIM POINT
10'-0"
1'-1
"
ENTRY ID
G1
DANGER NO TRESPASSINGR1.I
AUTHORIZED PERSONNEL ONLYR1.J
RESERVED ACCESSIBLE PARKINGR1.F
EMERGENCY EXIT ONLYR1.K
VAN ACCESSIBLER1.G
ELECTRIC VEHICLE PARKINGR1.L
15 MINUTE PARKINGR1.B
24 HOUR PARKINGR1.C
RESERVED SECURITY PARKINGR1.D
RESERVED SERVICE PARKINGR1.E
NO PARKINGR1.A
1'-6
"
1'-0"
4'-0" AFF
DIM POINT
ESCALATOR SAFETY
RULES
R2.E
1'-0
"
8"
4'-0" AFF
DIM POINT
2
'
-
0
"
2
'
-
0
"
5'-0
"
CAUTION LOOK BOTH WAYS
R3
PARKING
R4
4'-0
"3
'-0
"
2'-0"
FARE ZONE PENDANT DOUBLE SIDED
R6
FARE ZONE PENDANT SINGLE SIDED
R5
9'-0" MIN AFF
DIM POINT
6'-4"
1'-2
"
VA
RIE
S
4'-9"
2 CAR TRAIN STOPPING MARKER
X1.A
4 CAR TRAIN STOPPING MARKER
X1.B
1'-0
"7
'-0
"
1'-0"
ORCA READER
R7
5'-2
"
SOFFIT
WHERE
OCCURS
SOFFIT
WHERE
OCCURS
SOFFIT
WHERE
OCCURS
POST
WHERE
OCCURS
R1.G WHERE
INDICATED IN PLANS
0 8/2019 NEW - ARCH DIRECTIVE AND STANDARD DWGS
GENERAL NOTES:
1. ALL SIGNAGE, INCLUDING SIGNAGE PANELS, PENDANTS, POLES, INTEGRAL MOUNTING
BRACKETS, DECALS, AND FASTENERS SHALL BE PROVIDED AND INSTALLED BY THE
SIGNAGE INSTALLER UNDER A SEPARATE CONTRACT UNLESS OTHERWISE NOTED.
2. CONTRACTOR SHALL PROVIDE ANCHOR BOLTS AND BLOCKING AND OR ATTACHMENT
SUPPORTS FOR SIGNAGE AT THE LOCATIONS INDICATED IN THE SIGNAGE PLANS,
SIGNAGE DETAILS AND OTHERWISE NOTED IN THE GENERAL CONTRACT DRAWINGS.
3. CODE RELATED "J" SERIES SIGNAGE SHALL BE PROVIDED BY THE CIVIL CONTRACTOR.
4. WHERE PENDANT LENGTH EXCEEDS THE MAXIMUM ALLOWABLE LOADING FOR
ALUMINUM, SIGNAGE CONTRACTOR SHALL PROVIDE STEEL PENDANT UNDER THE
SIGNAGE CONTRACT.
5. SEE STATION SPECIFIC STRUCTURAL DRAWINGS FOR SIGN FOUNDATION DETAILS.
6. COORDINATE WITH CIVIL DRAWINGS FOR SIGN LOCATIONS OUTSIDE OF STATIONS.
7. COORDINATE LOCATION AND WEIGHTS OF SIGNS WITH SOUND TRANSIT CAPITAL
