AVAILABLE F IN ISHES FOR PRIMARY F IN ISH (1 )
STANDARD AB, BL, BP, BZ, HB, WH
PREMIUM I AG, AS, DB, DT, GT, GM, HN, PT, PW, SB, SG, VN, ZC
PREMIUM II HR, PB, PBU, PN
AVAILABLE F IN ISHES FOR SECONDARY F IN ISH (2 )
STANDARD AB, BL, BP, BZ, HB, WH
PREMIUM I AG, AS, DB, DT, GT, GM, HN, PT, PW, SB, SG, VN, ZC
PREMIUM II HR, PB, PBU, PN
AVAILABLE F IN ISHES FOR ACCENT F IN ISH (3 )
STANDARD AB, AG, AS, BL, BP, BZ, DB, DT, GT, GM, HB, HR, HN, PT, PW, PB, PBU, PN, SB, SG, VN, WH, ZC
DETAILS
NOTES
Designed by Michael Amato.
Ships with complimentary bulbs.
This fixture has been filed with the United States Patent and Trademark Office, U.S. Pat. Pen. (U.S. Appl. No. 29/558,940)
© Copyright 2003-2017 The Urban Electric Co. All rights reserved.
W H D LAMP CANOPY X Y Z UL WEIGHT
HANG SMALL MA-1535HS 8 9.5 1-60W-S 4.75” DIAM 5.75 4 DAMP 6 lbs
J A C K S O N MA-1535
2 1 3 0 N O R T H H O B S O N A V E N U E N . C H A R L E S T O N , S C 2 9 4 0 5 / / T E L 8 4 3 7 2 3 8 1 4 0 / / F A X 8 4 3 7 2 3 8 7 4 8 / / U R B A N E L E C T R I C C O . C O M
FLOOD REFLECTOR
J A C K S O N MA-1535
Bronze and Antique Brass with Gilt Accent
When reaching such a distance with a fixture, it is important that it feels visually efficient in its form but is still far from fragile, inviting one to linger under it. The adjustability in the reach and the height of the shade make it possible to custom fit the piece to its surroundings- an important characteristic for such a large piece.
Nick SheridanDesigner
reach adjustable 30”
shade height max. 6’-7”
shade height min. 3’-11”
9’-0” fully extended6’-6” fully retracted
19”
24”
7’-11”
WEBER THOMPSON for Willows Lodge
949.715.1534 CERNOGROUP.COM
Valeofloor
Dimensions - 95” H - 25” Ø shade Solid wood, aluminum, fabric shade, black powder coated steel base (CM-049)Product weight - 95 lbsUniversal medium base E26 socketIncluded LED A19 bulbLight output - 800 lumensLight color - 2700 KColor accuracy - 93+ CRIPower usage - 13.5WDimmable (use TRIAC or ELV dimmer)72” clear silver cord with inline footswitch 24” from baseBottom diffuser includedWood grain will varySpecifications subject to change
MATERIAL & FINISH OPTIONS
Valeo part # 05 - 400 - AWL
Boom Arm:brushed aluminum (CM-006) A
Wood Body:walnut (CM-001) W
Fabric Shade:white linen (CM-016) L
Alternate voltage/plug styles are available
©2016 Cerno, L.L.C. All Rights Reserved. The Cerno graphic is a registered trademark of cerno, L.L.C. Cerno reserves the right to change specifications for product improvements without notification.
BLT Series LED
2BLT 2' x 2'
LED
LED 2BLT-2X2
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONSINTENDED USE — The BLT Best-in-Value Low Profile LED luminaire features a popular center basket design that offers a clean, versatile style and volumetric distribution. High efficacy LED light engines deliver energy savings and low maintenance compared to traditional sources. An extensive selection of configurations and options make the BLT the perfect choice for many lighting applications including schools, offices and other commercial spaces, retail, hospitals and healthcare facilities. The low profile BLT design (2-3/8") also makes it an excellent choice for renovation projects.CONSTRUCTION — BLT enclosure components are die-formed for dimensional consistency and painted after fabrication with a polyester powder paint for improved performance and protection.The reflector is finished with a high reflective matte white powder paint for improved aesthetics and increased light diffusion.End plates contain easy-to-position integral T-bar clips for securely attaching the luminaire to the T-grid. For additional T-grid security, optional screw on T-bar clips are available.Diffusers are extruded from impact modified acrylic for increased durability.LED boards and drivers are accessible from the plenum.OPTICS — Volumetric illumination is achieved by creating an optimal mix of light to walls, partitions and vertical and horizontal work surfaces – rendering the interior space, objects and occupants in a more balanced, complimentary luminous environment. High performance extruded acrylic diffusers conceal LEDs and efficiently deliver light in a volumetric distribution. Four diffuser choices available - curved and square designs with linear prisms or a smooth frosted finish. ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior quantity and quality of illumination for extended service life. 70% LED lumen maintenance at 60,000 hours (L70/60,000). Non-Configurable BLT: Generic 0-10 volt dimming driver. Dims to 10%Configurable BLT: available in High Efficiency (HE) versions for applications where a lower wattage (over the standard product) is required. The High Efficiency versions deliver >130 LPW and can be specified via the Lumen Package designations in the Ordering Information below.eldoLED driver options deliver choice of dimming range, and choices for control, while assuring flicker-free, low-current inrush, 89% efficiency and low EMI. Optional integrated nLight®controls make each luminaire addressable - allowing it to digitally communicate with other nLight enabled controls such as dimmers, switches, occupancy sensors and photocontrols. Connection to nLight is simple. It can be accomplished with integrated nLight AIR wireless or through standard Cat-5 cabling. nLight offers unique plug-and-play convenience as devices and luminaires automatically discover each other and self-commission, while nLight AIR is commissioned easily through an intuitive model app.Lumen Management: Unique lumen management system (option N80) provides on board intelligence that actively manages the LED light source so that constant lumen output is maintained over the system life, preventing the energy waste created by the traditional practice of over-lighting.Step-level dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance. Driver disconnect provided where required to comply with US and Canadian codes.SENSOR— Integrated sensor (individual control): Sensor Switch MSD7ADCX ((Passive infrared (PIR)) or MSDPDT7ADCX ((PIR/Microphonics Dual Tech (PDT)) integrated occupancy sensor/automatic dimming photocell allows the luminaire to power off when the space is unoccupied or enough ambient light is entering the space. See page 4 for more details on the integrated sensor.Integrated Sensor (nLight Wired Networking): This sensor is nLight-enabled, meaning it has the ability to communicate over an nLight network. When wired, using CAT-5 cabling, with other nLight-enabled sensors, power packs, or WallPods, an nLight control zone is created. Once linked to a Gateway, directly or via a Bridge, the zone becomes capable of remote status monitoring and control via SensorView software. See page 4 for the nLight sensor options.Integrated Smart Sensor (nLight Air Wireless Platform): The rES7 sensor is nLight AIR enabled, meaning it has the ability to communicate over the wireless nLight control platform. It is both a digital PIR occupancy sensor/automatic dimming photocell. It pairs to other luminaires and wall switches through our mobile app, CLAIRITY, which allows for simple sensor adjustment. See page 4 for more details on the Integrated Smart Sensor.INSTALLATION — The BLT’s low profile design of only 2-3/8” provides increased installation flexibility especially in restrictive plenum applications. The BLT fits into standard 15/16” and narrow 9/16” T-grid ceiling systems.Suitable for damp location.For recessed mounting in hard ceiling applications, Drywall Grid Adapters (DGA) are available as an accessory. See Accessories section.LISTINGS — CSA Certified to meet U.S. and Canadian standards. IC rated. DesignLights Consortium® (DLC) Premium qualified product. Not all versions of this product may be DLC Premium qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.WARRANTY — 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
NOTE: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice.
Specifications
Length: 23-3/4 (60.3)
Width: 23-3/4 (60.3)
Depth: 2-3/8 (6.0)
Depth with Air supply/return: 2-3/4 (6.9)
All dimensions are inches (centimeters) unless otherwise specified.
Multiple Diffuser Options
Square Ribbed Square Smooth
Curved Ribbed
ADP ADSM
SDP SDSM
Curved Smooth
Capable LuminaireThis item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.
• All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency
• This luminaire is part of an A+ Certified solution for nLight® control networks when ordered with drivers marked by a shaded background*
• This luminaire is part of an A+ Certified solution for nLight control networks, providing advanced control functionality at the luminaire level, when selection includes driver and control options marked by a shaded background*
To learn more about A+, visit www.acuitybrands.com/aplus.
*See ordering tree for details
2BLT Volumetric Recessed Lighting 2'x2'
2BLT-2X2
LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 www.lithonia.com © 2015-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/13/17
ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: 2BLT2 33L ADP EZ1 LP835
2BLT2
Series Air function Lumens2 Diffuser Voltage Driver Color temperature
2BLT2 2X2 BLT (blank) StaticA Air
supply/ return1
Standard efficiency (>100 LPW)20L 200033L 330040L 4000
High efficiency3,4 (>130 LPW)33LHE 330040LHE 400048LHE 4800
ADP Curved, linear prismsADSM Curved, smoothSDP Square, linear prismsSDSM Square, smoothIncludes trim rings to match sensored version ADPT Curved, linear prismsADSMT Curved, smoothSDPT Square, linear prismsSDSMT Square, smooth
(blank) MVOLT120 120V277 277V347 347V5
EZ1 eldoLED dims to 1% (0-10 volt dimming)
SLD Step-level dimming6
LE1 Lutron Ecosystem driver dims to 1% 6,7
LP830 82CRI, 3000 KLP835 82CRI, 3500 KLP840 82CRI, 4000 KLP850 82CRI, 5000 KLP930 90CRI, 3000KLP935 90CRI, 3500KLP940 90CRI, 4000KLP950 90CRI, 5000K
Controls Occupancy control10 Options
(blank) No nLight®N80 nLight® with 80%
lumen managementN80EMG nLight® with
80% lumen management For use with generator supply EM power8
N100 nLight® without lumen management
N100EMG nLight® without lumen management For use with generator supply EM power8
NLTAIR nLight AIR enabled9
(blank) No sensor controlnLight Wired NetworkingNES7 nLight™ nES 7 PIR integral
occupancy sensor11
NESPDT7 nLight™ nES PDT 7 dual technology integral occupancy control11
NES7ADCX nLight™ nES 7 ADCX PIR integral occupancy sensor with automatic dimming photocell11
NESPDT7ADCX nLight™ nES PDT 7 dual technology integral occupancy sensor with automatic dimming photocell11
nLight Wireless Networking
RES7N nLight AIR PIR integral occupancy sensor with automatic dimming photocell for Networking Capabilities
Individual ControlMSD7ADCX PIR integral
occupancy sensor with automatic dimming control photocell6,12
MSDPDT7ADCX PDT integral occupancy sensor with automatic dimming control photocell6,12
nLight Wireless ZoneRES7Z nLight AIR
PIR integral occupancy sensor with automatic dimming photocell for zone control
EL7L 700 lumen battery pack13
EL14L 1400 lumen battery pack13
EL14LSD 1400 lumen battery pack with self-diagnostic testing feature13,14
CP Chicago plenum15
BGTD Bodine Generator Transfer Device16
PWS1836 6’ pre-wire, 3/8” diameter, 18 gauge, 1 circuitPWS1846 6’ pre-wire, 3/8” diameter, 18 gauge, 2 circuitPWS1846 PWSLV Two cables: one 6' pre-wire, 3/8” diameter, 18 gauge, 2
circuits; one 6' pre-wire, 3/8” diameter, 18 gauge, purple and gray17
PWS1856LV 6’ pre-wire, 3/8” diameter, 18 gauge, 1 circuit w/low voltage purple and grey wires17
GLR Fast-blowing fuse18
GMF Slow-blowing fuse18
NPLT Narrow palletRRL_ RELOC®-ready luminaire19
LATC Earthquake clipDWAM Anti-Microbial paintJP32 Job packagingIP5X Gasketed diffuser compartment to meet IP5X rating20
Notes1 Consult factory for airflow data.2 Approximate lumen output.3 All versions may not achieve 130+ LPW. Refer to photometry on www.
acuitybrands.com.4 Air supply/return option, 90 CRI, and versions with integral sensor trim
rings may not achieve 130 LPW.5 Not available with SLD EL7L, or EL14L options.6 Not available with N80, N80EMG, N100, N100EMG, NLTAIR, or occupancy
control.
7 Not available with controls, occupancy controls, or PWS options. Consult factory for Hi-Lume dimming.
8 nLight EMG option requires a connection to existing nLight network. Power is provided from a separate N80 or N100 enabled fixture.
9 Must order with RES7N or RES7Z sensor. Only available with EZ1 driver.10 Must specify diffuser with trim rings. See sensor options on page 4.11 Requires N80, N80EMG, N100, or N100EMG.12 Only available with EZ1 driver option. 0-10v dimming wires not
accessible via access plate.13 When using pre-wire option, use PWS1846 or PWS1846 PWSLV.
14 For more information, please see the PSSD2 specification sheet. 15 Not available with N80, N80EMG, N100, or N100EMG.16 Must specify voltage. Requires BSE labeling, voltage specific. Consult
factory for options.17 Not available with nLight wired/wireless network or individual controls.18 Must specify voltage, 120 or 277, with GLR and GFM fusing.19 For ordering logic consult RRL_2013.20 Not available with air supply/return or Wired Networking (NES_) and
Individual Control (MSD_) sensors.
Non-Configurable BLTStock/MTO Catalog Description * UPC Lumens Wattage LPW Color Temperature Voltage Pallet Qty
Stock 2BLT2 33L ADP LP835 00190887529708 3241 30 108 3500K/82 CRI 120-277 522BLT2 33L ADP LP840 00190887529739 3313 30 111 4000K/82CRI 120-277 52
2BLT2 33L ADP EL14L LP835 00190887529890 3241 30 108 3500K/82CRI 120-277 522BLT2 33L ADP EL14L LP840 00190887529937 3313 30 111 4000K/82CRI 120-277 52
MTO 2BLT2 33L ADP 347 LP835 3241 30 108 3500K/82 CRI 347 522BLT2 33L ADP 347 LP840 3313 30 111 4000K/82CRI 347 52
*Generic 0-10V Dimming to 10%.
Accessories next page
A+ Capable options indicated by this color background.
2BLT Volumetric Recessed Lighting 2'x2'
2BLT-2X2
LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 www.lithonia.com © 2015-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/13/17
nLight® Wired Control Accessories: Order as separate catalog number. Visit www.acuitybrands.com/products/controls/nlight.
WallPod stations Model number Occupancy sensors Model numberOn/Off nPODM [color] Small motion 360°, ceiling (PIR / dual tech) nCM 9 RJB / nCM PDT 9 RJBOn/Off & raise/lower nPODM DX [color] Large motion 360°, ceiling (PIR / dual tech) nCM10 RJB / nCM PDT 10 RJBGraphic touchscreen nPOD GFX [color] Wall switch with raise/lower nWSX PDT LV DX [color]Photocell controls Model number Cat-5 cable (plenum rated) Model numberFull range dimming nCM ADCX RJB 10' cable CAT5 10FT J1
30' cable CAT5 30FT J1
nLight® AIR Control Accessories: Order as separate catalog number. Visit www.acuitybrands.com/products/controls/nlightair.
Wall switches Model numberOn/Off single pole rPODB [color]On/Off two pole rPODB 2P [color]On/Off & raise/lower single pole rPODB DX [color]On/Off & raise/lower two pole rPODB 2P DX [color]On/Off & raise/lower single pole rPODBZ DX WH1
Accessories: Order as separate catalog number.
DGA22 Drywall grid adapter for 2x2 recessed fixture
Replacement Parts: Order as separate catalog number.
*247WJV 2DBLT24 ADP LENS ASSEMBLY 2 ft. replacement lens*249P2P 2DBLT24 SDP LENS ASSEMBLY 2 ft. replacement lens*249P2W 2DBLT24 ADSM LENS ASSEMBLY 2 ft. replacement lens*249P32 2DBLT24 SDSM LENS ASSEMBLY 2 ft. replacement lens *237LT1 2DBLT24 ADPT LENS ASSEMBLY 2 ft. replacement lens*237LT3 2DBLT24 SDPT LENS ASSEMBLY 2 ft. replacement lens*237LT5 2DBLT24 ADSMT LENS ASSEMBLY 2 ft. replacement lens *237LT7 2DBLT24 SDSMT LENS ASSEMBLY 2 ft. replacement lens*237LT9 2DBLT24 ADPT SENSOR LENS ASSEMBLY 2 ft. replacement lens*237M4Y 2DBLT24 SDPT SENSOR LENS ASSEMBLY 2 ft. replacement lens *237M57 2DBLT24 ADSMT SENSOR LENS ASSEMBLY 2 ft. replacement lens *237M5H 2DBLT24 SDSMT SENSOR LENS ASSEMBLY 2 ft. replacement lens
Notes1 Can only be ordered with the RES7Z zone control sensor version.
2BLT Volumetric Recessed Lighting 2'x2'
2BLT-2X2
LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 www.lithonia.com © 2015-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/13/17
Sensor Options
Option Automatic Dimming Photocell
Occupancy Sensing nLight Wired Networking
nLight AIR Networking
nLight AIR ZonePIR PDT
MSD7ADCX X X
MSDPDT7ADCX X X
NES7 X X
NES7ADCX X X X
NESPDT7 X X
NESPDT7ADCX X X X
RES7N X X X
RES7Z X X X
Integrated Sensor with Individual Control The MSD7ADCX PIR occupancy sensor/automatic dimming photocell is ideal for areas without obstructions and where daylight harvesting may be desired. Suggested applications include, but not limited to, hallways, corridors, storage rooms, and breakrooms or other areas where people are typically moving. The MSDPDT7ADCX PIR/Microphonics Dual Tech occupancy sensor/automatic dimming photocell is ideal for areas with obstructions and where daylight harvesting is desired. Suggested applications include, but not limited to, open offices, private offices, classrooms, public restrooms, and conference rooms.
Sequence of Operation
MIN
LIGHT
LEVE
L
MAX
7.5 MINTIME DELAY
2.5 MIN ATA 1% LEVEL
LIGHTS OFF LIGHTS ONLIGHTS ON
Room Unoccupied
OccupantsDetected In The Space
Sensor Detects Motion
MOTION NO MOTION MOTION
SEQUENCE OF OPERATION
5.5 184.6 153.7 122.7 91.8 60.9 30 m 0 ft0.9 31.8 62.7 93.7 124.6 155.5 18
9 FT Mounting
• Recommended for walking motion detection from mounting heights between 8 ft (2.44 m) and 20 ft (6.10 m)
• Initial detection of walking motion along sensor axes at distances of 2x the mounting height up to 15 ft (4.57 m) and
• 1.75x up to 20 ft (6.10 m).• Provides 12 ft (3.66 m) radial detection of small motion when mounted at 9 ft (2.74 m)• Initial detection will occur earlier when walking across sensor’s field of view than when
walking directly at sensor
Sensor Coverage PatternMini 360° Lens
Basic nLight Zone
*The presetting on the automatic dimming photocell is 5fc.
nLight Wired NetworkingThe nES 7 is ideal for small rooms without obstructions or areas with primarily walking motion. Ideal areas include hallways, corridors, storage rooms, and breakrooms. Additionally, the NES7ADCX includes an integrated photocell, which enables daylight harvesting controls.For areas like restrooms, private offices, open offices, conference rooms or any space with obstructions, the nES PDT 7 dual technology sensor is recommended. The nES PDT 7 utilizes both PIR (passive infrared) and Microphonics technologies to detect occupancy. Additionally, the NESPDT7ADCX includes an integrated photocell, which enables daylight harvesting controls which is ideal for areas where windows are present.
nLight AIR WirelessnLight AIR is the ideal solution for retrofit or new construction spaces where adding additional wiring can be labor intensive and costly. The integrated rES 7 smart sensor is part of each luminaire in the nLight AIR network, which can be grouped to control multiple luminaires. The granularity of control with the digital PIR occupancy detection and daylight sensing makes a great solution for any application.
Sequence of Operation
MIN
LIGHT
LEVE
L
MAX
17.5 MINTIME DELAY
2.5 MIN ATA 1% LEVEL
LIGHTS OFF LIGHTS ONLIGHTS ON
Room Unoccupied
OccupantsDetected In The Space
Sensor Detects Motion
MOTION NO MOTION MOTION
SEQUENCE OF OPERATION
*The presetting on the automatic dimming photocell is 5fc.
NH NH NH
One Lithonia Way, Conyers, Georgia 30012 | Phone: 800.535.2465 | www.acuitycontrols.com/nlightair©2016 Acuity Brands Lighting, Inc. All rights reserved. | NL_3162_0716
nLight AIR rPODB 2P DX Mobile Device
BLT Series
CLAIRITY Mobile App for Easy System Start-up
• Intuitive mobile app for simplified zoning and sensor setting changes
• App provides visual feedback to confirm changes to settings
• Secure wireless system is enabled with user verification to keep your
information safe
• CLAIRITY is compatible with iOS7+, Google Android KitKat+
and associated devices
• Automatically recognizes fixtures with wireless capability
• Easily identify fixtures through blink feature
• Pair fixtures with wireless wall switches and various sequences of operations
• Group and name fixtures, i.e., Room 120
• Cloud connected saving all zoning and configuration setting in a space
1. Install the nLight® AIR fixtures with embedded smart sensor
2. Install the wireless battery-powered wall switch
3. With CLAIRITY app, pair the fixtures with the wall switch and if desired, customize the sensor settings for the desired outcome
Simple as 1,2,3
A+ Certified solutions from Acuity Brands help you quickly and confidently select and implement lighting systems, for indoor or outdoor applications, that are both compatible and consistent. ™
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Acuity Brands is under license. Other trademarks and trade names are those of their respective owners.
2BLT Volumetric Recessed Lighting 2'x2'
2BLT-2X2
LED: One Lithonia Way Conyers, GA 30012 Phone: 800-858-7763 www.lithonia.com © 2015-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/13/17
PHOTOMETRICS
Performance Data
Lumen Package Lumens Input Watts LPW
20L ADP LP830 2157 20 110
20L ADP LP835 2213 20 113
20L ADP LP840 2261 20 116
20L ADP LP850 2373 20 121
33L ADP LP830 3160 30 106
33L ADP LP835 3241 30 108
33L ADP LP840 3313 30 111
33L ADP LP850 3476 30 116
40L ADP LP830 4103 39 106
40L ADP LP835 4209 39 108
40L ADP LP840 4302 39 111
40L ADP LP850 4514 39 116
AIR 20L ADP LP830 2019 20 103
AIR 20L ADP LP835 2060 20 105
AIR 20L ADP LP840 2116 20 108
AIR 20L ADP LP850 2134 20 109
AIR 33L ADP LP830 2957 28 104
AIR 33L ADP LP835 3017 28 107
AIR 33L ADP LP840 3099 28 109
AIR 33L ADP LP850 3126 28 110
AIR 40L ADP LP830 3841 39 99
AIR 40L ADP LP835 3919 39 101
AIR 40L ADP LP840 4025 39 104
AIR 40L ADP LP850 4060 39 104
2BLT2 33L ADP LP835, 3241 delivered lumens, test no. LTL28918P4, tested in accordance to IESNA LM-79
2BLT2 40L ADP LP835, 4210 delivered lumens, test no. LTL28918P5, tested in accordance to IESNA LM-79
0° 20°
40°
60°
80°
90°
0°0°0° 90°
180°
200
400
600
800
1000
1200
1400
Coefficients of Utilization
pf 20%
pc 80% 70% 50%
pw 70%50%30% 50%30%10% 50%30%10%
119
108
98
89
81
75
69
64
59
56
52
119
103
89
78
69
61
55
50
46
42
39
119
98
82
69
60
52
46
41
37
34
31
116
100
87
76
67
60
54
49
45
41
38
116
96
80
68
59
52
46
41
37
33
30
116
92
75
62
52
45
39
35
31
28
25
111
96
83
73
65
58
52
48
44
40
37
111
92
78
66
57
50
45
40
36
33
30
111
89
73
61
52
44
39
34
31
28
25
RC
R
0
1
2
3
4
5
6
7
8
9
10
Zonal Lumen Summary
Zone Lumens % Lamp % Fixture
0° - 30°
0° - 40°
0° - 60°
0° - 90°
90° - 180°
0° - 180°
1107
1799
3169
4211
0
4211
26.3
42.7
75.3
100.0
0.0
100.0
26.3
42.7
75.3
100.0
0.0
100.0
CP Summary
0° 90
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
90
1447
1419
1354
1224
1050
849
640
434
230
57
7
1447
1452
1396
1294
1158
1001
829
650
466
191
3
0° 20°
40°
60°
80°
90°
0°0°0° 90°
180°
200
400
600
800
1000
Coefficients of Utilization
pf 20%
pc 80% 70% 50%
pw 70%50%30% 50%30%10% 50%30%10%
119
108
98
89
81
75
69
64
59
56
52
119
103
89
78
69
61
55
50
46
42
39
119
98
82
69
60
52
46
41
37
34
31
116
100
87
76
67
60
54
49
45
41
38
116
96
80
68
59
52
46
41
37
33
30
116
92
75
62
52
45
39
35
31
28
25
111
96
83
73
65
58
52
48
44
40
37
111
92
78
66
57
50
45
40
36
33
30
111
89
73
61
52
44
39
34
31
28
25
RC
R
0
1
2
3
4
5
6
7
8
9
10
Zonal Lumen Summary
Zone Lumens % Lamp % Fixture
0° - 30°
0° - 40°
0° - 60°
0° - 90°
90° - 180°
0° - 180°
852
1385
2440
3242
0
3242
26.3
42.7
75.3
100.0
0.0
100.0
26.3
42.7
75.3
100.0
0.0
100.0
CP Summary
0° 90
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
90
1114
1092
1042
943
808
653
492
334
177
44
5
1114
1118
1075
996
891
770
638
501
359
147
2
Constant Lumen ManagementEnabled by the embedded nLight control, the BLT actively tracks its run-time and manages its light source such that constant lumen output is maintained over the system life. Referred to as lumen management, this feature eliminates the energy waste created by the traditional practice of over-lighting.
HE Performance Data
Lumen Package Lumens Input Watts LPW
33LHE ADP LP830 3537 28 126
33LHE ADP LP835 3628 28 130
33LHE ADP LP840 3708 28 132
33LHE ADP LP850 3891 28 139
40LHE ADP LP830 4118 32 127
40LHE ADP LP835 4224 32 131
40LHE ADP LP840 4317 32 134
40LHE ADP LP850 4530 32 140
48LHE ADP LP830 4699 37 128
48LHE ADP LP835 4820 37 131
48LHE ADP LP840 4927 37 134
48LHE ADP LP850 5169 37 140
MOUNTING DATA
Ceiling Type Appropriate Trim Type
Exposed grid tee (1’ and 9/16”) G
Concealed grid tee G
Plaster or plasterboard G*
*DGA accessory available to provide ceiling trim flange and fixture support for plaster or plasterboard ceiling. Recommended rough-in dimensions for DGA installation is 24-3/4" x 24-3/4" (Tolerance is +1/8", -0”).
9/16 Screw Slot15/16
0 10 20 30 40 50THOUSAND OPERATING HOURS
0 10 20 30 40 50THOUSAND OPERATING HOURS
POWER INPUT
LIGHTOUTPUT
100%
80%
100%
80%
30W
24W
30W
24W
LIG
HT
OU
TPU
T
LIG
HT
OU
TPU
T
POW
ER IN
PUT
POW
ER IN
PUT
Without Lumen ManagementEnergy is wasted and light level is inconsistent.
POWERINPUT
LIGHT OUTPUT
With Lumen ManagementEnergy is saved and light level remains consistent.
Wasted Energy
Saved Energy
0 10 20 30 40 50THOUSAND OPERATING HOURS
0 10 20 30 40 50THOUSAND OPERATING HOURS
POWER INPUT
LIGHTOUTPUT
100%
80%
100%
80%
30W
24W
30W
24W
LIG
HT
OU
TPU
T
LIG
HT
OU
TPU
T
POW
ER IN
PUT
POW
ER IN
PUT
Without Lumen ManagementEnergy is wasted and light level is inconsistent.
POWERINPUT
LIGHT OUTPUT
With Lumen ManagementEnergy is saved and light level remains consistent.
Wasted Energy
Saved Energy
Prudential Ltg. reserves the right to change design specifications or materials without notice. Please visit www.prulite.com for most current data. © 2014 All rights reserved – All products manufactured at: Prudential Ltg. 1774 E. 21st Street, Los Angeles, CA 90058
PRULITE.COM 213.746.0360
Snap™ (White Acrylic) | Linear, SurfaceLED
1Architectural Wrap
03-14-2016
S1-LED4-HO-04-WA3760 Delivered Lumens43 Watts87 lm/w84 CRI28 R9
2´3´4´6´8´R___ (Row length in 1´ increments)
99 LM/WUP TO
LOW MEDIUM STANDARD HIGHlm/ft 500 700 850 940w/ft 5 7 9 11
*R1-LED4LO-SAL is DLC QPL listed. For other DLC listings, please consult factory.
Our basic lighting building block.
This perfectly scaled wrap simply snaps quickly, neatly and securely into a wide range of spaces. Industry-leading optical peformance and integrated controls help make Snap one of our best-selling fixtures. Our LPA lens turns Snap into an oustanding Stack fixture ideal for warehouses, manufacturing, libraries and more. See HalfSnap for a smaller profile.
White Acrylic Lens (WA)
LED27 2700KLED3 3000KLED35 3500KLED4 4000K
R1 RoundS1 Square
LO Low MO Medium SO StandardHO HighPROG Program-mable Light Output (Specify desired lm/ft or w/ft)
WA White AcrylicNOTE: See other spec sheet for Satin Acrylic and Linear Prismatic Stack lenses
TMW Textured Matte WhiteYGW Gloss White (Standard)
Y__ Premium ColorCC Custom ColorGLV Galvanized with Black endplates
UNV (120-277)
SUR Surface or Wall MountCA48˝ or 96˝ Aircraft Cable (Adjustable)
X1 T-BarX3 Hard CeilingX6 Slot Grid
ND Non-DimmingDM10 0-10v 10% Dimming (Standard)
DM01 0-10v 1% DimmingSTEP Step Dimming 100-50-OffDML 1% Lutron DimmingDMD 0.1% DALI DimmingDMG 1% DALI Dimming
EML* Emergency Battery, Low (850 delivered lumens)
EMH* Emergency Battery, High (1175 delivered lumens)
TRS Tamper Resistant ScrewsEBCP1G Electrical Box Cover, Single GangEBCP2G Electrical Box Cover, Dual GangC2 Unlit 90˚ CornerPRUBIN Meticulous Binning and Labeling Every LED Board within a 2-Step MacAdams Ellipse*4’ or longer (remote for < 4’)
S1
R1
SHIELDINGNOMINALLENGTH
OUTPUTLEDCOLOR
SERIES COLOR/FINISH
VOLTAGE MOUNTING CEILINGSYSTEMS
CONTROLS OPTIONS
Type:
Job:
5LED WARRANTY
YEAR5
LED WARRANTY
YEAR
*
Lumen output may vary +/- 5% 4000K used for lm/ft estimates above 3500K –2% llf, 3000K –4%, 2700K –6%See LED Details PDF for more info
2 3/8˝ 2 3/8˝
3˝3˝
Prudential Ltg. reserves the right to change design specifications or materials without notice. Please visit www.prulite.com for most current data. © 2014 All rights reserved – All products manufactured at: Prudential Ltg. 1774 E. 21st Street, Los Angeles, CA 90058
PRULITE.COM 213.746.0360
Snap™ (White Acrylic) | Linear, SurfaceLED
2Architectural Wrap
03-14-2016
LUMEN MAINTENANCE Designed to last with cool running mid-power LEDs projected to
maintain 90% (L90) of their initial output for 100,000 hours (at HO), and L70 exceeding 150,000 hours.
LED SYSTEM LED modules and drivers are field replaceable.
PROG (optional) Programmable light output. Specify desired lumens or watts per linear foot. Min: 2.5 w/ft, consult factory for requests above 12 w/ft.
BINNING Standard binning (all Prudential LED boards) includes testing at the chip level and board integration to provide consisten color temperature within a 3-step MacAdam ellipse, with +/- 5% lumen output range and +/- .004 Duv.
PRUBIN™ Prudential Ltg’s exclusive ‘job binning’ method that ensures color temperature consistency across all luminaires on a project. Meticulously testing and labeling EVERY LED BOARD to +/- 25 lumens, +/- 50k CCT and +/- .004 Duv — while also separating positive from negative — allows us to match color, hue and intensity throughout a project and provides a consistent color temperature within a 2-step MacAdam ellipse.
LABELS ETL damp labeled and I.B.E.W. manufactured
ELECTRICAL Must specify LED dimming controls. LED fixtures have constant current driver(s) with less than 20% THD when loaded to a minimum of 60%. Drivers sink a maximum of 6mA per driver. DM10 LED drivers are 0-10V dimmable and are compatible with most 0-10V wall slide dimmers and direct 0-10V analog signal dimmers. Max driver size 1.65˝ w x 1.25˝ h.
CONSTRUCTION
Housing Die-formed 22-gauge steel, >20% PC recycled, 100% recyclable
End Caps Spring-fastened aluminum, >25% PC recycled, 100% recyclable
Lens Single-piece (up to 8´ lengths) extruded acrylic, 100% recyclable
MOUNTING Surface mounted to walls or ceilings or suspended by cable
WEIGHT 2 lbs/ft
WARRANTY Single-source, 5 year limited warranty covers standard components and construction
PHOTOMETRICS
Low Output:S1-LED4-HO-04-WA3760 Delivered Lumens43 Watts87 lm/w4000 CCTLight Labs Test #L021508901
Zonal Lumen Summary:0-90 = 77%90-180 = 23%
676
Vertical Angle 0 25 45 65 90
0 676 676 676 676 676
5 684 682 680 678 676
15 708 704 692 666 649
25 716 710 676 641 605
35 703 685 645 590 538
45 669 646 596 524 450
55 613 585 563 442 351
65 539 507 440 345 240
75 451 416 343 240 69
85 365 330 296 146 23
90 342 306 230 124 1
95 335 299 224 117 0
105 313 279 207 106 0
115 283 252 186 93 0
125 245 218 159 77 0
135 201 177 123 56 0
145 151 131 84 37 0
155 98 77 54 23 0
165 47 35 24 12 0
175 9 8 7 6 0
180 0 0 0 0 0
(OPTIONAL)
Prudential Ltg. reserves the right to change design specifications or materials without notice. Please visit www.prulite.com for most current data. © 2014 All rights reserved – All products manufactured at: Prudential Ltg. 1774 E. 21st Street, Los Angeles, CA 90058
PRULITE.COM 213.746.0360
Snap™ (White Acrylic) | Linear, SurfaceLED
3Architectural Wrap
03-14-2016
Client: CSUN Northridge, Architect: LPA Inc. Lighting Dersigner: Studio K1
5 7⁄16
5 7⁄16
5 7⁄16
5 7⁄16
11⁄16 K.O. / stem & powerfeed
ADJOINING DETAIL
MOUNTING LOCATIONS
Allow space for access TRS - Tamper Resistant Fastener
EBCP - Electrical Box Cover PlateC2 - Unlit steel 90 ̊corner
4˝
4˝
Nuit — Preconfigured
1
Date: Customer:
Project:
Type: Qty:
HousingExtruded aluminum profiles suitable for pendant, recessed, and surface mounted installation
Finishes• White (RAL 9016)
• Black (RAL 9004)
• RAL color finish on request
Mounting Options• Recessed mounted — for
drywall, wood, decoustics, grid, or other ceilings
• Surface mounted
• Pendant mounted
LengthSee drawings and tables for available lengths (pages 3-6) and learn how to customize for individual applications.
ConfigurationsAngular corners available upon request
1.425 W 2700K = 118lm (CRI=85) 3000K = 126lm (CRI=85) 4000K = 171lm (CRI=85) Highly efficient lens design
Construction Electrical CharacteristicsLED SpecificationNuit is specified in increments of five LEDs — 16V per five LEDs driven at 500mA.
LED Life Calculated L70 greater than 140,000 hours and Reported L70 greater than 60,000 hours @ 25°C per TM-21.
Correlated Color Temperature (CCT)• Available in 2700K, 3000K,
4300K with two-step MacAdam ellipse binning.
• Standard CRI 85, higher
CRI on request.
GearStandard 0–10V dimming, universal voltage (120–277V). Lutron, Dali and DMX available upon request.
a. Integrally Mounted — Each driver can operate two sets of five LEDs
b. Remote mounted eldoLED 100W (4 LED output channels) Driver, 500mA — three sets of five LEDs can be powered from each channel of this driver. Available driver enclosure houses up to two drivers each.
For non-dimming application, cap off the dimming wires.
Nuit fixtures can be ordered in preconfigured profile systems for surface, recessed or pendant mounting.
Components1. Recessed mounting profile in
aluminum finish (only needed for recessed applications)
2. Finished fixture (for all mounting options)
3. Integrated LED module — available as 1x5 or 1x10 configurations
1 7/8"(47.0)
2 3/4"(70.7)
1 9/16"(40.0)
2 1/8"(54.4)
1
2
3
01000200030004000
OpticDouble focus optical system
Cut-off angle 55o
Power factor > 0.9
Suitable for green building certification:
• LEED
• Energy
• DNGB
Double Focus Lens
Nuit — Preconfigured
2
Nuit fixtures are ETL Listed for damp locations.Nuit fixtures lend support for LEED credits and certification.LED WARRANTY
5YEAR ADACOMPLIANT
Recessed Mounted Fixtures — Gear Excluded (Remote Driver)
1.A Nuit Fixtures (Gear Excluded)
kreon code finish led config. wattage lumens cct cri driver length
KU953202 BLACK 1X5 7.1 590 2700K 85 0-10V 0'–11 13/16"
KU953302 BLACK 1X5 7.1 630 3000K 85 0-10V 0'–11 13/16"
KU953402 BLACK 1X5 7.1 855 4300K 75 0-10V 0'–11 13/16"
KU953242 BLACK 1X10 14.7 1180 2700K 85 0-10V 1'–9 5/8"
KU953342 BLACK 1X10 14.7 1260 3000K 85 0-10V 1'–9 5/8"
KU953442 BLACK 1X10 14.7 1710 4300K 75 0-10V 1'–9 5/8"
KU953201 WHITE 1X5 7.1 590 2700K 85 0-10V 0'–11 13/16"
KU953301 WHITE 1X5 7.1 630 3000K 85 0-10V 0'–11 13/16"
KU953401 WHITE 1X5 7.1 855 4300K 75 0-10V 0'–11 13/16"
KU953241 WHITE 1X10 14.7 1180 2700K 85 0-10V 1'–9 5/8"
KU953341 WHITE 1X10 14.7 1260 3000K 85 0-10V 1'–9 5/8"
KU953441 WHITE 1X10 14.7 1710 4300K 75 0-10V 1'–9 5/8"
KU****** Optional Diffusing Lens for Nuit
1.B Recessed Profile
kreon code length
KR753000 0'–11 15/16"
KR753000 0'–11 15/16"
KR753000 0'–11 15/16"
KR753040 1'–9 13/16"
KR753040 1'–9 13/16"
KR753040 1'–9 13/16"
KR753000 0'–11 15/16"
KR753000 0'–11 15/16"
KR753000 0'–11 15/16"
KR753000 1'–9 13/16"
KR753000 1'–9 13/16"
KR753000 1'–9 13/16"
Ordering Codes
10 7/8" (227.0)
LENGTH OF (1X10) FIXTURE (SEE TABLE 1.A)
LENGTH WITH RECESSED PROFILE (SEE TABLE 1.B)
JUNCTION BOX (BY KREON)
Recessed mounted Nuit fixtures are made up of a fixture (table 1.A) plus the corresponding recessed profile (table 1.B).
Example: A standard length configured recessed mounted Nuit, 1x5, gear excluded, white finish 2700K fixture would comprise of item code KU953201 (fixture) and item code KR753000 (recessed profile).
Nuit — Preconfigured
3
Nuit fixtures are ETL Listed for damp locations.Nuit fixtures lend support for LEED credits and certification.LED WARRANTY
5YEAR ADACOMPLIANT
Nuit Recessed Mounted Fixtures — Gear Included (Internal Driver)
2.A Fixtures (Gear Included)kreon code finish led config. wattage lumens cct cri driver length
KU953212 BLACK 1X5 7.1 590 2700K 85 0-10V 1'–5 11/16"
KU953312 BLACK 1X5 7.1 630 3000K 85 0-10V 1'–5 11/16"
KU953412 BLACK 1X5 7.1 855 4300K 75 0-10V 1'–5 11/16"
KU953252 BLACK 1X10 14.7 1180 2700K 85 0-10V 2'–4 3/8"
KU953352 BLACK 1X10 14.7 1260 3000K 85 0-10V 2'–4 3/8"
KU953452 BLACK 1X10 14.7 1710 4300K 75 0-10V 2'–4 3/8"
KU953211 WHITE 1X5 7.1 590 2700K 85 0-10V 1'–5 11/16"
KU953311 WHITE 1X5 7.1 630 3000K 85 0-10V 1'–5 11/16"
KU953411 WHITE 1X5 7.1 855 4300K 75 0-10V 1'–5 11/16"
KU953251 WHITE 1X10 14.7 1180 2700K 85 0-10V 2'–4 3/8"
KU953351 WHITE 1X10 14.7 1260 3000K 85 0-10V 2'–4 3/8"
KU953451 WHITE 1X10 14.7 1710 4300K 75 0-10V 2'–4 3/8"
KU****** Optional Diffusing Lens for Nuit
2.B Recessed Profilekreon code length
KR753010 1'–5 7/8"
KR753010 1'–5 7/8"
KR753010 1'–5 7/8"
KR753050 2'–4 1/2"
KR753050 2'–4 1/2"
KR753050 2'–4 1/2"
KR753010 1'–5 7/8"
KR753010 1'–5 7/8"
KR753010 1'–5 7/8"
KR753050 2'–4 1/2"
KR753050 2'–4 1/2"
KR753050 2'–4 1/2"
4 5/16" (109.7)
4 1/4" (107.7)
FIXTURE LENGTH (SEE TABLE 2.A)
FIXTURE LENGTH (SEE TABLE 2.A)
LENGTH WITH RECESSED PROFILE (SEE TABLE 2.B)
MOUNTING HARDWARE (BY OTHERS)
Recessed mounted fixtures are made up of a fixture (table 2.A) plus the corresponding recessed profile (table 2.B). Example: A standard length configured recessed mounted Nuit, 1x5, gear included, white finish, 2700K fixture would comprise of item code KU953211 (fixture) and item code KR753010 (recessed profile).
Ordering Codes
Nuit — Preconfigured
4
Recessed Mounted Hardware Options
DRYWALL CEILING
DECOUSTIC CEILINGWOOD CEILING
Nuit — Preconfigured
1
Date: Customer:
Project:
Type: Qty:
HousingExtruded aluminum profiles suitable for pendant, recessed, and surface mounted installation
Finishes• White (RAL 9016)
• Black (RAL 9004)
• RAL color finish on request
Mounting Options• Recessed mounted — for
drywall, wood, decoustics, grid, or other ceilings
• Surface mounted
• Pendant mounted
LengthSee drawings and tables for available lengths (pages 3-6) and learn how to customize for individual applications.
ConfigurationsAngular corners available upon request
1.425 W 2700K = 118lm (CRI=85) 3000K = 126lm (CRI=85) 4000K = 171lm (CRI=85) Highly efficient lens design
Construction Electrical CharacteristicsLED SpecificationNuit is specified in increments of five LEDs — 16V per five LEDs driven at 500mA.
LED Life Calculated L70 greater than 140,000 hours and Reported L70 greater than 60,000 hours @ 25°C per TM-21.
Correlated Color Temperature (CCT)• Available in 2700K, 3000K,
4300K with two-step MacAdam ellipse binning.
• Standard CRI 85, higher
CRI on request.
GearStandard 0–10V dimming, universal voltage (120–277V). Lutron, Dali and DMX available upon request.
a. Integrally Mounted — Each driver can operate two sets of five LEDs
b. Remote mounted eldoLED 100W (4 LED output channels) Driver, 500mA — three sets of five LEDs can be powered from each channel of this driver. Available driver enclosure houses up to two drivers each.
For non-dimming application, cap off the dimming wires.
Nuit fixtures can be ordered in preconfigured profile systems for surface, recessed or pendant mounting.
Components1. Recessed mounting profile in
aluminum finish (only needed for recessed applications)
2. Finished fixture (for all mounting options)
3. Integrated LED module — available as 1x5 or 1x10 configurations
1 7/8"(47.0)
2 3/4"(70.7)
1 9/16"(40.0)
2 1/8"(54.4)
1
2
3
01000200030004000
OpticDouble focus optical system
Cut-off angle 55o
Power factor > 0.9
Suitable for green building certification:
• LEED
• Energy
• DNGB
Double Focus Lens
Nuit — Preconfigured
2
Nuit fixtures are ETL Listed for damp locations.Nuit fixtures lend support for LEED credits and certification.LED WARRANTY
5YEAR ADACOMPLIANT
Recessed Mounted Fixtures — Gear Excluded (Remote Driver)
1.A Nuit Fixtures (Gear Excluded)
kreon code finish led config. wattage lumens cct cri driver length
KU953202 BLACK 1X5 7.1 590 2700K 85 0-10V 0'–11 13/16"
KU953302 BLACK 1X5 7.1 630 3000K 85 0-10V 0'–11 13/16"
KU953402 BLACK 1X5 7.1 855 4300K 75 0-10V 0'–11 13/16"
KU953242 BLACK 1X10 14.7 1180 2700K 85 0-10V 1'–9 5/8"
KU953342 BLACK 1X10 14.7 1260 3000K 85 0-10V 1'–9 5/8"
KU953442 BLACK 1X10 14.7 1710 4300K 75 0-10V 1'–9 5/8"
KU953201 WHITE 1X5 7.1 590 2700K 85 0-10V 0'–11 13/16"
KU953301 WHITE 1X5 7.1 630 3000K 85 0-10V 0'–11 13/16"
KU953401 WHITE 1X5 7.1 855 4300K 75 0-10V 0'–11 13/16"
KU953241 WHITE 1X10 14.7 1180 2700K 85 0-10V 1'–9 5/8"
KU953341 WHITE 1X10 14.7 1260 3000K 85 0-10V 1'–9 5/8"
KU953441 WHITE 1X10 14.7 1710 4300K 75 0-10V 1'–9 5/8"
KU****** Optional Diffusing Lens for Nuit
1.B Recessed Profile
kreon code length
KR753000 0'–11 15/16"
KR753000 0'–11 15/16"
KR753000 0'–11 15/16"
KR753040 1'–9 13/16"
KR753040 1'–9 13/16"
KR753040 1'–9 13/16"
KR753000 0'–11 15/16"
KR753000 0'–11 15/16"
KR753000 0'–11 15/16"
KR753000 1'–9 13/16"
KR753000 1'–9 13/16"
KR753000 1'–9 13/16"
Ordering Codes
10 7/8" (227.0)
LENGTH OF (1X10) FIXTURE (SEE TABLE 1.A)
LENGTH WITH RECESSED PROFILE (SEE TABLE 1.B)
JUNCTION BOX (BY KREON)
Recessed mounted Nuit fixtures are made up of a fixture (table 1.A) plus the corresponding recessed profile (table 1.B).
Example: A standard length configured recessed mounted Nuit, 1x5, gear excluded, white finish 2700K fixture would comprise of item code KU953201 (fixture) and item code KR753000 (recessed profile).
Nuit — Preconfigured
3
Nuit fixtures are ETL Listed for damp locations.Nuit fixtures lend support for LEED credits and certification.LED WARRANTY
5YEAR ADACOMPLIANT
Nuit Recessed Mounted Fixtures — Gear Included (Internal Driver)
2.A Fixtures (Gear Included)kreon code finish led config. wattage lumens cct cri driver length
KU953212 BLACK 1X5 7.1 590 2700K 85 0-10V 1'–5 11/16"
KU953312 BLACK 1X5 7.1 630 3000K 85 0-10V 1'–5 11/16"
KU953412 BLACK 1X5 7.1 855 4300K 75 0-10V 1'–5 11/16"
KU953252 BLACK 1X10 14.7 1180 2700K 85 0-10V 2'–4 3/8"
KU953352 BLACK 1X10 14.7 1260 3000K 85 0-10V 2'–4 3/8"
KU953452 BLACK 1X10 14.7 1710 4300K 75 0-10V 2'–4 3/8"
KU953211 WHITE 1X5 7.1 590 2700K 85 0-10V 1'–5 11/16"
KU953311 WHITE 1X5 7.1 630 3000K 85 0-10V 1'–5 11/16"
KU953411 WHITE 1X5 7.1 855 4300K 75 0-10V 1'–5 11/16"
KU953251 WHITE 1X10 14.7 1180 2700K 85 0-10V 2'–4 3/8"
KU953351 WHITE 1X10 14.7 1260 3000K 85 0-10V 2'–4 3/8"
KU953451 WHITE 1X10 14.7 1710 4300K 75 0-10V 2'–4 3/8"
KU****** Optional Diffusing Lens for Nuit
2.B Recessed Profilekreon code length
KR753010 1'–5 7/8"
KR753010 1'–5 7/8"
KR753010 1'–5 7/8"
KR753050 2'–4 1/2"
KR753050 2'–4 1/2"
KR753050 2'–4 1/2"
KR753010 1'–5 7/8"
KR753010 1'–5 7/8"
KR753010 1'–5 7/8"
KR753050 2'–4 1/2"
KR753050 2'–4 1/2"
KR753050 2'–4 1/2"
4 5/16" (109.7)
4 1/4" (107.7)
FIXTURE LENGTH (SEE TABLE 2.A)
FIXTURE LENGTH (SEE TABLE 2.A)
LENGTH WITH RECESSED PROFILE (SEE TABLE 2.B)
MOUNTING HARDWARE (BY OTHERS)
Recessed mounted fixtures are made up of a fixture (table 2.A) plus the corresponding recessed profile (table 2.B). Example: A standard length configured recessed mounted Nuit, 1x5, gear included, white finish, 2700K fixture would comprise of item code KU953211 (fixture) and item code KR753010 (recessed profile).
Ordering Codes
Nuit — Preconfigured
4
Recessed Mounted Hardware Options
DRYWALL CEILING
DECOUSTIC CEILINGWOOD CEILING
1
Nuit — Made-to-Measure
Nuit is an elementarily designed beam that can be used as an elegant line to bring graphical elements into your architecture. The advanced LED system requires only a slim gap of ⅖" to unfold its light. Its basic form draws minimal attention and can easily be used in combination with other Kreon tools of light, creating an artistic yet responsible use of light sources.
The design of this unique linear system provides the opportunity to introduce sparkle as a lighting element into a space... Sparkle and the play of brilliant individual light sources stimulates the body and spirit through the optic nerve and charms the senses. It enhances the feeling of aliveness, alerts the mind, and awakens curiosity.1
The light source in Nuit is a module that contains five or ten 1.4W LEDs with a standard color rendering of CRI 90+. The core of Nuit is a patented double focus lens optic developed in cooperation with Bartenbach Lichtlabor. This helps the luminaire to have exceptional glare control and a high efficiency with a lumen maintenance of L70 at 60,000 hours.
1. Richard Kelly, lighting design pioneer
1
Date: Customer:
Project:
Type: Qty:
Luminaire
Made from extruded
aluminum.
Recessed Housing
Made from extruded
aluminum.
Finishes• White (RAL 9016)
• Black (RAL 9004)
• RAL color finish upon request
Mounting Options• Recess mounted in drywall/
sheetrock or plaster with trimless spackle flange
• Surface mounted
• Pendant mounted with
aircraft cable
ClassificationsNuit fixtures are ETL Listed for damp locations.
Nuit fixtures lend support for LEED credits and certification.
Construction Electrical CharacteristicsLED SpecificationPhilips Luxeon LED Series
LED Life
L70 greater than 60,000 hours.
Correlated Color Temperature (CCT)• Available in 2700K, 3000K,
3500K and 4000K.
• CRI 80+, 95+.
GearStandard 0-10V dimming, universal voltage (120-277V). For non-dimming applications, cap off dimming wires.
Optional smooth dim to dark with eldoLED SOLOdrive LED driver (specify 0-10V or DALI control possible) (120-277V).
Driver is integral to fixture in most configurations. If light modules are run continuously, driver may be required to be remote. Consult factory for additional information.
REV#11 2/2017
2
Nuit fixtures are ETL Listed for damp locations.Nuit fixtures lend support for LEED credits and certification.LED WARRANTY
5YEAR ADACOMPLIANT
Nuit – 1¾" Wide ApertureIndividual or Continuous Linear Recessed, Surface, or Pendant Mounted System
CCEACHICAGO PLENUM COMPLIANT
Ordering Codes and Options
KUNUIT ____ - ____ - ____ - ____ - ____ - ____ - 90 - ____ - ____ - ____ x 5 - ____ x 10 -
kreon nuit
linear system
mounting (see p. 3 for more info)
ceiling type (see page 3 for
more info)
outer channel
finish color*
inner reveal finish
color*
channel length
(in)
light source
cct
crilight
directiondimming**
quantity of 1x5 spot
led modules in run
quantity of 1x10 spot
led modules in run
RN – Recessed, trimless
RF – Recessed w/flange
RNCP – Recess, trimless, Chicago Plenum
RNFP – Recess, w/flange, Chicago Plenum
SF – Surface
PE – Pendant
DW – Drywall/ sheetrock (3/8" to 1" thickness)****
SL – Slot grid or T-Grid w/tegular ACT
FL – T-Grid w/flat ACT tile
OT – Other, please consult factory
1 – White
2 – Black
1 – White
2 – Black
Fill in total number of inches for channel run using three digits.
Example: 10’ run would be 120 for 120”
27 – 2700K
30 – 3000K
35 – 3500K
40 – 4000K
CIR – Circadian Rhythm (2700K – 4000K)***
90 – 90+ min CRI
DW – Direct only
UD – Up and Down (same switching)
UDS – Up and Down (separate switchting)
UP - Indirect only
D2 – 0-10V dim to10% (120V – 277V)
D3 – Lutron Hi-Lume dim to 1% (consult factory for 2-wire, 3-wire, or digital control)
D4 – EldoLED 0% dim to dark
Qty x 5 spot LED modules in this channel run
Use “00” for none of this type.
(req approx. 11” each)
Qty x 10 spot LED modules in this channel run
Use “00” for none of this type.
(req approx. 21” each)
Ordering Example: KUNUIT-RN-DW-2-2-0120-30-90-UD-D2-05x5-00x10
Please include rough description of module layout in channel for each type on fixture schedule. Layout confirmed via shop drawing upon order.
* Consult factory for custom RAL finish color options
** Depending on number of modules used, run length, and dimming option, driver may be required as remote. Factory to confirm via shop drawing upon order.
*** Circadian Rhythm option requires additional control system. Consult factory for details.
****Adjustable mounting bracket accommodates drywall/sheetrock/plaster ceiling between 3/8" and 1" thickness.
Photometry — For full photometry, please reference IES files on www.kreon.com
Per each 1x10 LED module (approx. 21”)
Light Engine: 1260 source Lumens
CCT: 3000K
CRI: 90+
Power: 14W
Luminaire Output: 930 delivered Lumens
Per each 1x5 LED module (approx. 11”)
Light Engine: 630 source lumens
CCT: 3000K
CRI: 90+
Power: 7W
Luminaire Output: 466 delivered Lumens
Note: Indirect lighting element has 600 source lumens/ft.
REV#11 2/2017
4
Nuit fixtures are ETL Listed for damp locations.Nuit fixtures lend support for LEED credits and certification.LED WARRANTY
5YEAR ADACOMPLIANT
Nuit – 1¾" Wide ApertureIndividual or Continuous Linear Recessed, Surface, or Pendant Mounted System
CCEACHICAGO PLENUM COMPLIANT
Mounting Options (Continued)
DIRECT / INDIRECT PENDANT INSTALLATION
SURFACE MOUNTED INSTALLATION
PENDANT INSTALLATION
Consult factory for reduced plenum requirement mounting of 3 ½”.
Light modules installed in factory and not intended to be adjusted in the field. Factory will provide shop drawing before order release.
For configurations with integral drivers, D2 dimming option requires one driver @ 6” long per each 10 total spots (two 1x5 modules OR one 1x10 module). D3 dimming requires one driver @ 15” long per each 15 total spots. D4 dimming requires one driver @ 18” long per each 30 total spots.
REV#11 2/2017
PH-SERIES (INDOOR)PERFORMANCEHIGH OUTPUTLINEAR LED LIGHTING
Conforms to ANSI/UL Standard 2108Certified to CAN/CSA Standard C22.2 No. 250.0
Ques t i ons/Suppor t 800 -789 -3810 | quo tes@Vo l t L i gh t i ngGroup .com
l i g h t i n g g r o u pVOLT
PRODUCT FEATURES• 90+ CRI
• Dimmable
• 50,000 hour life
• 5-year warranty
• UL-listed for indoor use
• 3M™ Industrial adhesive backing
• For use with electronic or magnetic power supplies
SPECIFICATIONS
070516EC
TOTAL WATTAGE USED AT EACH LENGTH
KELVIN COLOR TEMPERATURE SCALE
2,00
0K
2,40
0K
2,70
0K
5,00
0K
6,00
0K
3,00
0K
3,50
0K
4,10
0K
Fixture Type:
Project:
Location:
ULLISTED
C USR
24
Series PH - Performance High Output (Indoor)
Input Voltage 24V DC / Constant Voltage
Beam Spread 120°
Max Run Length Unlimited, power every 30ft
Cut Intervals 1-5/16in (33.3mm)
Dimensions 3/8in (10mm) x 1/16in (1.5mm)
CRI 90+
Diode Epistar 2835
Dimming Options PWM, Triac, 0-10V, DMX, Hi-lume
Temp Range -40°F (-40°C) to 149°F (65°C)
MODEL: PH24K-24V PH27K-24V PH3K-24V PH35K-24V PH41K-24V PH5K-24V
Kelvin 2400K 2700K 3000K 3500K 4100K 5000KLumens 262 lm/ft 322 lm/ft 330 lm/ft 340 lm/ft 347 lm/ft 356 lm/ft
Depth: 1.5mm
Cut Intervals: 33.3mm (1-5/16in)
Width: 10mm
151 DC24V
+++
___DC24VDC24V
++
__DC24VDC24V
++
__DC24VDC24V
151
151
151
151DC24V
++
__DC24V
151
151
151
151
1ft 2ft 3ft 4ft 5ft 6ft 7ft 8ft 9ft 10ft 11ft 12ft 13ft 14ft 15ft4.2 8.5 12.7 16.8 21 25.4 29.2 32.9 36.9 40.5 44.2 48 51.4 54.6 57.7
16ft 17ft 18ft 19ft 20ft 21ft 22ft 23ft 24ft 25ft 26ft 27ft 28ft 29ft 30ft60.7 64.3 67 70.4 71.8 75.2 77.7 80 83 85.1 86.6 88.7 91.2 93.7 94.6
CH-514EXTRUDED ALUMINUMMOUNTING CHANNEL
Fixture Type:
Project:
Location:
Ques t i ons/Suppor t 800 -789 -3810 | quo tes@vo l t l i gh t i ngg roup .com
l i g h t i n g g r o u pVOLT
ORDERING INFORMATION
Example: CH514-1Mounting
na Not Applicable
PRODUCT FEATURES
• Extruded aluminum construction
• 5-year warranty
• Available in 1 or 2 meter sections
• Anodized matte finish
• Consult factory for custom lengths & finishes
Lens
na Not Applicable
End CapLength
1 meter2 meter
Series
CH-514
CH514
SPECIFICATIONS
CH-514
16.9mm (11/16”)
Model
Length
Internal Width
1 or 2 metersOverall Width 19.7mm (3/4”)
16.9 mm
5 m
m
na
5mm (3/16”)Height
19.7 mm
na Not Applicable
nana
CH-502-AEXTRUDED ALUMINUMMOUNTING CHANNEL
Fixture Type:
Project:
Location:
Ques t i ons/Suppor t 800 -789 -3810 | quo tes@vo l t l i gh t i ngg roup .com
CH-502-A
17.1mm (11/16”)
12.2mm (1/2”)
SPECIFICATIONS
Model
LengthExternal Width
Internal Width
Height 8mm (5/16”)
°
PRODUCT FEATURES
• Extruded aluminum construction
• Available in 1 or 2 meter sections
l i g h t i n g g r o u pVOLT
1 or 2 meters
ORDERING INFORMATION
Example: CH502A-2-CL-PL-ECMounting
PL PlasticMT MetalPV Pivot
End cap with holeEnd cap without hole
12.2 mm
17.1 mmPlastic mounting clips (PL)Metal mounting clips (MT)Pivot (metal) mounting clips (PV)
• Anodized matte finish
• Consult factory for custom lengths & finishes
End Cap
EC End Cap(included)
Length
1 meter2 meter
Series
CH-502-A
CH502A EC
8 m
m
ApplicationsClear lens (CL)Frost lens (FR)White lens (WH)
Lens
CL ClearFR FrostWH White
ULV9696 WATT - 24 VOLTCLASS 2 POWER SUPPLY
Fixture Type:
Project:
Location:
Ques t i ons/Suppor t 800 -789 -3810 | quo tes@vo l t l i gh t i ngg roup .com
l i g h t i n g g r o u pVOLT
RoHS O
PRODUCT FEATURES SPECIFICATIONSModel
Input Voltage Range 100~277VACOutput Voltage
Wattage
Power Factor
ULV96
96W
24VDC Constant Voltage
Dimensions 13-3/8”W x 1-3/4”H x 4-5/16”D
0.9
Working Temperature
IP Rating
-40°F ~ 158°F
Dimming TRIAC, PWM, 0-10V
IP65
Conforms to ANSI/UL Standard 8750Certified to CAN/CSA Standard C22.2 No. 250.0-08
• 5 Year Warranty
• TRIAC or 0-10V Dimming
• Free air convection cooling
• Protections: Short circuit / Over current / Over voltage
• Suitable for dry / wet location
• Class 2
24
1-3/4
”
2-15/16”8-7/8”13-3/8”
1-9/16”
4-5/
16”
l i g h t i n gg r o u p
VOLT
Class 2 Power Supply
ULV9624V/96W
www.VoltLightingGroup.com
INPUT
ACL (BRN)
ACN (BLU)
GROUND (YEL-GRN) INPUT: 100~120VAC/1.3A 50/60Hz (TRIAC DIMMING)
OUTPUT: 24VDC/(0~4)A 96WmaxCONSTANT VOLTAGE
Dry/Wet Locations IP65
ta: 122°Ftc: 194°FRoHS
OUTPUT
DIM+ (VLT)
DIM- (GRY)
DC+ (BRN)
DC- (BLU)100~277VAC/1.3A 50/60Hz (PWM/ 0-10V DIMMING)
ULLISTED
C USR
OVERVIEW • SPECIFICATIONS • ORDERING INTERIOR | L35
DATE P ROJ EC T FI R M T Y PE
1/3ECOS E N S E LIG HTING .COM
20170426
P • 310.496 . 6255F • 310.496 . 6256T • 855.632.6736 855.6 . ECOSEN
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. VISIT ECOSENSELIGHTING.COM FOR THE MOST CURRENT SPECIFICATIONS.
© 2017 ECOSENSE LIGHTING INC. ALL RIGHTS RESERVED. ECOSENSE, THE ECOSENSE LOGO, RISE, TROV, SLIM COVE AND ECOSPEC ARE REGISTERED TRADEMARKS OF ECOSENSE LIGHTING INC.
FREEDOM TO CREATE™
ECOSENSE LIGHTING INC.837 NORTH SPRING STREET SUITE 103 LOS ANGELES, CA 90012
PERFORMANCE
ELECTRICAL
WATTS OPTIC LUMEN OUTPUT EFFICACY
COLOR RENDERING INDEX 80+, 90+
POWER CONSUMPTION 2W*/LF (6.6W/M) ; 4W/LF (13.2W/M) ; 6W/LF (19.8W/M) ; 8W/LF (26.4W/M) ; 10W/LF (33W/M) ; 12W/FL (39.6W/M) * 3W/LF (9.9W/M) at 220V -277V
POWER FACTOR 4W, 6W, 8W, 10W, 12W >0.9, 2W<0.9
STARTUP TEMPERATURE -40˚F TO 122˚F (-40˚C TO 50˚C)
OPERATING VOLTAGE MULTIVOLT: 110-277VAC, 50/60 Hz
OPERATING TEMPERATURE -40˚F TO 122˚F (-40˚C TO 50˚C)
DRIVER INTEGRAL TO FIXTURE; DE-RATED POWER AND SYNCHRONOUS START-UP AT FULL BRIGHTNESS
STORAGE TEMPERATURE -40˚F TO 176˚F (-40˚C TO 80˚C)
MAX FIXTURE RUN LENGTH
COLOR CONSISTENCY 2-STEP MACADAM ELLIPSE
LUMEN DEPRECIATION / RATED LIFE WATTS L70 @ 25C L70 @ 50C L90 @ 25C L90 @ 50C *CALCULATIONS FOR LED FIXTURES ARE BASED ON MEASUREMENTS THAT COMPLY WITH IES LM-80 TESTING PROCEDURES AND IES TM-21 CALCULATOR
2W-8W >73,000 >60,000 >22,000 >18,000
10W-12W >150,000 >70,000 >50,000 >25,000
2W 12O˚ 127 Im/LF ( 417 lm/m ) 64 Im/W
4W 12O˚ 327 Im/LF ( 1073 lm/m ) 82 Im/W
6W 12O˚ 511 Im/LF ( 1676 lm/m ) 85 Im/W
8W 12O˚ 655 Im/LF ( 2148 lm/m ) 82 Im/W
10W 12O˚ 916 Im/LF ( 3005 lm/m ) 92 Im/W
12W 12O˚ 1026 Im/LF ( 3386 lm/m ) 85 Im/W
ALL LUMEN DATA IS FROM 4000K 80CRI FIXTURES. PLEASE SEE PHOTOMETRY SPEC SHEET FOR ADDITIONAL LUMEN DATA.
2W/LF 4W/LF 6W/LF 8W/LF 10W/LF 12W/LF
VoltsMax Run
all 1’Max Run
all 4’Max Run
all 1’Max Run
all 4’Max Run
all 1’Max Run
all 4’Max Run
all 1’Max Run
all 4’Max Run
all 1’Max Run
all 4’Max Run
all 1’Max Run
all 4’
120 214 214 186 186 152 152 114 114 91 91 76 76
220 374 392 340 340 277 277 209 209 95 167 95 139
277 374 494 374 428 349 349 263 263 95 190 95 175
OPTICS
120
CRI
8090**Blank For Color
CCT
WHITECCT2225*27 30354050
POWER
020406081012
LENGTH
12"48"
INTERIOR/EXTERIOR
I
MODEL/ SIZE
L35
VOLTAGE
MULT (120-277V)MONOCOLORGR****BLAMRD***
THE L35 INCLUDES A PATENTED OPTICAL DESIGN THAT
DELIVERS A 120° BEAM ANGLE OPTION IN AN ULTRASLIM
FORM FACTOR FOR PRECISE COVE LIGHTING APPLICATIONS.
EXCLUSIVE FLIP TO FLAT™ HINGE DESIGN PROVIDES
FLEXIBILITY WHEN MANAGING SMALL COVE DETAILS. TROV
OFFERS SMOOTH, FLICKER FREE DIMMING DOWN TO 0%.
FEATURES :
• DIM TO 0%, ELV REVERSE PHASE
• ULTRA LOW PROFILE
• MULTI-VOLT
• FLIP TO FLAT™
• 7 CCT OPTIONS
• 80+ AND 90+ CRI OPTIONS
• IP54 INTERIOR
EXAMPLE: L35-I-48-06-30-90-MULT-120 *2500K is not available in 10W **90 CRI not available in 2200K, 2500K or 5000K ***Red is not available in 12W or
10W. ****Green is not available in 12W. See page 2 for cables and accessories
OVERVIEW • SPECIFICATIONS • ORDERING INTERIOR | L35
DATE P ROJ EC T FI R M T Y PE
2/3ECOS E N S E LIG HTING .COM
20170426
P • 310.496 . 6255F • 310.496 . 6256T • 855.632.6736 855.6 . ECOSEN
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. VISIT ECOSENSELIGHTING.COM FOR THE MOST CURRENT SPECIFICATIONS.
© 2017 ECOSENSE LIGHTING INC. ALL RIGHTS RESERVED. ECOSENSE, THE ECOSENSE LOGO, RISE, TROV, SLIM COVE AND ECOSPEC ARE REGISTERED TRADEMARKS OF ECOSENSE LIGHTING INC.
FREEDOM TO CREATE™
ECOSENSE LIGHTING INC.837 NORTH SPRING STREET SUITE 103 LOS ANGELES, CA 90012
CONTROL DIMMING 110-277VAC, ELV TYPE 0.07%-100%, REVERSE PHASE, TRAILING EDGE
PHYSICAL
HOUSING /LENS EXTRUDED ALUMINUM; CLEAR POLYCARBONATE; STAINLESS STEEL FASTENERS; PLASTIC ENDCAPS RUBBER OVERMOLD FOR CABLE ASSEMBLY
DIMENSIONS W 1.6” x H 1.4” x L 12”/48” ; (41.6mm x 35.9mm x 304.7mm/1201mm)
WEIGHT 1.2LBS / 0.55KG (1FT) ; 3.95LBS / 1.8KG (4FT)
CONNECTORS INTEGRAL MALE/ FEMALE CONNECTORS
BEAM ANGLE COVE
ENVIRONMENT INDOOR • ETL CERTIFIED FOR DRY/DAMP LOCATIONS IP54
MOUNTING OPTIONS INTEGRAL MOUNTING AND ADJUSTABLE AIMING FROM 0˚-180˚ IN 15˚ INCREMENTS
LIMITED WARRANTY 5 YEARS
*Two (2) terminators are included with the 10’ and 50’ power cable. One Leader need per circuit/fixture run. Cables are not plenum rated.** If using the 5’ or 1’ power cable assembly as a leader to power a run one set of CBL-3P-L-UNV-CAPS will also be need per cable.
WIRING OPTIONS (MVOLT): 110-277VAC
Power Cable Assembly, TROV, Leader/Jumper, 10 foot ......................................................................CBL-3P-L-UNV-10* Power Cable Assembly, TROV, Leader/Jumper, 50 foot .....................................................................CBL-3P-L-UNV-50*Power Cable Assembly, TROV, Jumper, 5 foot ........................................................................................CBL-3P-L-UNV-05** Power Cable Assembly, TROV, Jumper, 1 foot ........................................................................................CBL-3P-L-UNV-01**Power Cable Assembly, TROV, Male and Female terminator caps .................................................CBL-3P-L-UNV-CAPS
OPTIONAL ACCESSORIES
MountingMounting Track and Clips Set, 48 Inch Track, 8 Clips ...... MNT-L-TRKCLIP-48 .......48” track and clips set will work with one 48” fixture or four 12” fixtures. Mounting Track and Clips Set, 12 Inch Track, 2 Clips ..........MNT-L-TRKCLIP-12 .......12” track will not work with 48” fixtures. Mounting Track Clip, TROV, Set of 2 ........................................................ MNT-L-CLIP .......Clips needed = 12” fixtures need 1 set of 2 and 48” fixture needs 2 sets of 2.90 Degree L bracket, TROV, Set of 2 .....................................................MNT-L-LBKT .......L-Brackets needed = 12” fixtures need 1 set of 2 and 48” fixture needs 1 set of 2. Angle Locking Clip, TROV, Pack of 10.........................................MNT-L-ANGLOCK .......Angle Locks needed = 12” fixtures need 1 and 48” fixtures need 2.Mounting, Fine Adjustment Bracket, TROV .......................................... MNT-L-FAB .......Fine Adjustment Brackets needed = 12” fixtures need 1 and 48” fixtures need 2.*Fine Adjustment Bracket is highly recommended for Grazing Optics.
Mounting, Fine Adjustment L-Bracket, TROV ....................................MNT-L-LFAB .......Fine Adjustment L-Brackets needed = 12” fixtures need 1 and 48” fixtures need 2.*Fine Adjustment L-Bracket is recommended for Asymetric Optics when aiming is needed.
Wall Mount ArmWall Mount Arm, 6 inch, TROV ........................................................... WMA-L-CA-06Wall Mount Arm, 12 inch, TROV ............................................................ WMA-L-CA-12Wall Mount Arm, 18 inch, TROV ............................................................WMA-L-CA-18Wall Mount Arm, 24 inch, TROV ..........................................................WMA-L-CA-24Wall Mount Arm End Plate Set, TROV, Includes Left and Right .......WMA-L-ENDWall Mount Arm Joiner Plate, TROV ......................................................WMA-L-JNR
Wall Mount Arms needed = For individual fixture installations two arms and one end set will be needed per fixture. For continuous run installation one endset will be needed per run. Each end set contains one left and one right end plate. One joining set will be needed per joint. One arm per fixture will be need plus one extra arm to complete the run. For example: A 10ft run made with two 4ft and two 1ft fixtures will contain; 1 x WMA-L-END, 3 x WMA-L-JNR, and 5 x WMA-L-CA-12. Leader cables are not included with wall mount arms, end sets, or joiners sets.
Snap-on LensesSnap-on Lens, Frosted, 12 inch, L35 .....................................LENS-L35-FROST-12 Snap-on Lens, Frosted, 48 inch, L35 .................................. LENS-L35-FROST-48Snap-on Lens, Clear, 12 inch, L35 .........................................LENS-L35-CLEAR-12Snap-on Lens, Clear, 48 inch, L35 .......................................LENS-L35-CLEAR-48
Snap-on Lenses need = One 12” lens is needed per 12” fixture and one 48” lens is needed per 48” fixture. Clear lenses can be used to hold colored filters to customize the output color of any TROV fixture, except the ASYM. Color filters supplied by others.
Landscape StakeLandscape Stake, 6 inch, TROV, Set of 2.............................................LS-L-STK-06Landscape Stake, 12 inch, TROV, Set of 2 .............................................LS-L-STK-12Landscape Stake, 18 inch, TROV, Set of 2 ............................................ LS-L-STK-18
Landscape Stakes needed = 12” and 48” fixtures both need one set of 2.
Masking PlatesMasking Plate, 3 inch high, 12 inch, L50 & L35 ...............................MP-L50-3H-12Masking Plate, 3 inch high, 48 inch, L50 & L35 ........................... MP-L50-3H-48
Masking Plates needed = One 12” lens is needed per 12” fixture and one 48” lens is needed per 48” fixture.
Wire BoxConduit Connection, Wire Box, TROV, Interior Only, L35 ............CC-L-WIREBOX Wire box can be used instead of a leader cable to start a run. 1/2” conduit
fitting can attach directly to the box on one end and the fixture to the other.
0-10V CONTROL OPTIONS
All products come standard with ELV dimming capabilities. 0-10V Control options required for operation at 0-10V. 100-120VAC / 277VAC Linear Dimming Control Module 0-10V - Plenum Rated ................. LDCM-PL-120-277-010V-GR
RoHSCOMPLIANT
FIXTURE RATING &
CERTIFICATIONS
CE, ETL CERTIFIED
RoHS COMPLIANT
ENERGY STAR COMPLIANT
RCM CERTIFIED
OVERVIEW • SPECIFICATIONS • ORDERING INTERIOR | L35
DATE P ROJ EC T FI R M T Y PE
3/3ECOS E N S E LIG HTING .COM
20170426
P • 310.496 . 6255F • 310.496 . 6256T • 855.632.6736 855.6 . ECOSEN
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. VISIT ECOSENSELIGHTING.COM FOR THE MOST CURRENT SPECIFICATIONS.
© 2017 ECOSENSE LIGHTING INC. ALL RIGHTS RESERVED. ECOSENSE, THE ECOSENSE LOGO, RISE, TROV, SLIM COVE AND ECOSPEC ARE REGISTERED TRADEMARKS OF ECOSENSE LIGHTING INC.
FREEDOM TO CREATE™
ECOSENSE LIGHTING INC.837 NORTH SPRING STREET SUITE 103 LOS ANGELES, CA 90012
1.40 [35.6]
1.64 [41.6]
1.41[35.9]
1.64 [41.6]
12.00 [304.7]
47.3 [1201]
29.3 [744.6]
41.3 [1049]
2.19 [55.6]
1.80 [45.8]
45°
0.97 [24.7]
2.90 [73.7]
2.32[59]
2.00 [50.9]
75°180°
0.27 0.13[6.89 3.30]
1.64[41.7]
6.00Ø 0.22
[5.52][151.7]
6.00[151.7]
0.87
[22.
1]
2.01[51.1]
1.00[25.4]
2.01[51.1]
1.00[25.4]
0.40
[10.
2]
6.00[151.7]
* 4FT FIXTURE
Regolo 4 LED Trimless Series
Nulite Lighting 10770 East 51st Avenue, Denver, CO 80239 Phone 303-287-9646 Fax 303-287-0316 www.nulite-lighting.com
Description:
TM
Construction: The housing consists of extruded aluminum side rails with formed cold rolled steel back channel and heavy gauge end caps. Housing can be joined together for continuous row applications. Standard finish is powder coat textured white. Optional silver, black or custom color paint finishes.
Reflector / Driver: Reflector / driver cover is finished with high reflectance white paint. Optional asymmetric semi-specular aluminum reflector. Standard constant current electronic driver with 0-10V dimming input; dimming range from 100% down to 10%. Universal (UNV) voltage is from 120 - 277V, 50/60 Hz.
Shielding: Extruded frosted or satin white acrylic snap-in lens with DR.
LED Module: Distributed LED array in a variety of lumen output packages. LED color is available in (L30) 3000K, (L35) 3500K or (L40) 4000K. Module is replaceable. L90 ≥ 100,000 hours.
Mounting: Recessed, individual or continuous row.
Labels: ETL listed, conforms to UL Standard 1598 / 8750 and CSA Standard C22.2, Damp location.
Warranty: 5-year limited warranty on LED and Driver.
The Regolo RT4 series is a nominal 4” wide recessed trimless LED luminaire. The slender design is ideal for corridors, open and private offices, classrooms, lobbies and general purpose rooms.
Specifications:
Ordering InformationSample: RT4-05L35-UNV-ELE-1C-FRF-WH-20’Series Voltage
RT4
UNV
120
277
2016 Rev. D1Specifications and dimensions are subject to change without notification. Specification sheets on our website supersede all other versions. Nulite reserves the right to bulk package any order.
LengthColor
WH(White - Standard)
BK(Black)
SV(Silver)
CC(Custom Color)
Shielding
L30
L35
L40
Driver Circuit
1C Single Circuit
1E Single Circuit w/ EM Circuit
1B Single Circuit w/ Battery Pack
edTechnology
Lumen Package1 / Color
RT4(Trimless - Nom. 4”)
Options
FRF(Frosted Flush)
FRD(Frosted Drop Opaque End)
FRL(Frosted Drop Luminous End)
STF(Satin White Flush)
STD(Satin White Drop Opaque End)
STL(Satin White Drop Luminous End)
Consult factory for uplight shielding or dust cover.
2’3’4’5’6’7’8’Continuous Runs4
XX’ Specify run length in 1 foot increments. Consult factory for custom lengths.
3-1/2” [89mm]
3-3/
4” [9
5mm
]
4-3/
8” [1
11m
m]
3-3/
4” [9
5mm
]
1/4-20 All Thread Rod and Hardware, by others.
5/8” Drop Lens Option
Notes:1. Nominal lumen output per foot w/ frosted lens and 3500K.2. Standard driver, don’t connect low-voltage wires for non-dimming applications. Consult factory for specifications and manufacturer.3. Consult factory for specifications and manufacturer.4. 6” increments are common custom lengths. We can provide custom run length down to the nearest (+/- 1/8”).5. Only available with Frosted Flush lens.
OS5 End of run Occupancy Sensor
DS5 End of run Daylight Sensor
FLEX 6’ of Flex
ASYM5 Asymmetric Reflector
GLR Fusing
See Accessories for Corners and Downlight Modules
Project: Qty:
Catalog #:Date:
Type:
D2(Dim to 10%)
Dimming (0-10V)
D13(Dim to 1%)
D03(Dim to 0%)
Lutron DimmingSee Page 2 for Ordering Codes
eldoLED ECOdriveELE (Dim to 1%)
DALI Dimming
ELS (Dim to 0%) eldoLED SOLOdrive
ASYM Option Drop Lens Option
03 (~390 lm/ft, 3.28W/ft)
05 (~569 lm/ft, 4.85W/ft)
06 (~724 lm/ft, 6.38W/ft)
09 (~899 lm/ft, 7.79W/ft)
10 (~1036 lm/ft, 9.39W/ft)Consult Factory for Custom Lumen Package
RT4 LED Trimless Series
Nulite Lighting 10770 East 51st Avenue, Denver, CO 80239 Phone 303-287-9646 Fax 303-287-0316 www.nulite-lighting.com
TM
Specifications and dimensions are subject to change without notification.
Page 2
7/8” KO
3-5/8”2-5/8”
End Cap
1/4-20 Mounting Hole
Back of Housing Mounting Holes & Power Feed KO
Typical End of Housing Detail
Drop Lens w/ Opaque End Drop Lens w/ Luminous End
Satin White LensThis diffuser is designed for visible lens uniformity. It’s recommended for regressed lens configuration in our shallow housing. (Transmission ~ 69%)
Frosted LensThis diffuser is designed for a balance between efficiency and lens uniformity. (Transmission ~ 89%)
Frosted
SatinWhite
Lens Options
Sensor Options
24”
36”
48”
72”
84”
24”
36”
48”
72”
84”
24”
36”
48”
72”
96”
60”
84”
96”
60”
60”
96”
Individual Lengths
Occupancy and/or Daylight Sensor(Surface Mount Shown)
Nulite Code
Lutron Prefix
Lutron Series
Dim Level
3-Wire Eco- Systemtm
L11 L3DAE Hi-lumetm 1% Yes
L12 L3DA3W Hi-lumetm 1% Yes
L15 LDE1* Hi-lumetm - H Series 1% Yes
L16 LDE5 5-Series 5% Yes
Lutron Driver Ordering Codes
* Soft-on, Fade-to-Blacktm
Control TypeShielding
RT4 LED Trimless Series
Nulite Lighting 10770 East 51st Avenue, Denver, CO 80239 Phone 303-287-9646 Fax 303-287-0316 www.nulite-lighting.com
TM
Specifications and dimensions are subject to change without notification.
Page 3
2016 Rev. D1
Continuous Run Lengths
Run Length
2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’ 10’
11’
12’
13’
14’
15’
16’
17’
18’
19’
20’
21’
22’
23’
24’
25’
26’
27’
28’
29’
30’
31’
32’
33’
34’
35’
36’
37’
38’
39’
40’
41’
42’
43’
44’
2’ 1
3’ 1
4’ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
5’ 1 1 1 1 1 1 1 1 1 1
6’ 1 1 1 1 1 1 1 1 1 1
7’ 1 1 1 1 1 1 1 1 1 1
8’ 1 1 1 1 1 2 1 1 1 2 2 2 2 3 2 2 2 3 3 3 3 4 3 3 3 4 4 4 4 5 4 4 4 5
Num
ber o
f Hou
sing
s
Photometric Curves
RP4D-05L35DO-1C48C_A-FF-W
264
528
793
1057
Cat. # RT4-05L35-...-FRF-...-4’Frosted Flush LensWattage/ft - 4.85Lumens/Watt - 117
RP4D-09L35DO-1C48C_A-FF
418
835
1253
1670
Cat. # RT4-09L35-...-FRF-...-4’Frosted Flush LensWattage/ft - 7.79Lumens/Watt - 115
RW4D-05L40DU-1C48C_A-FF
310
620
929
1239
Cat. # RT4-05L40-...-FRF-...-4’-ASYMFrosted Flush LensWattage - 5.25Lumens/Watt - 110
Prologe complements the Kreon collection based on our principles for working with light: quality, architectural integration, and design. Prologe and its profile systems; new light concepts, key elements in a modular system that offers enormous flexibility for composing systematic yet highly individual light scenography.
Prologe 80 in-Dolma & in-Line Systems Light delivers mass, depth and form. Prologe 80 in-Dolma and in-Line Systems offer completely customized linear lighting solutions. From a design perspective, this can be an effective counterpoint to a simple static and uniform linear line of light. Recessed in a ceiling, it sculpts architecture. The profiles supporting Prologe units are made of anodized aluminum in multiple finishes. Profiles are pre-cabled and are made to measure according to lighting design specifications.
Prologe 80 Ligna Developed in partnership with Bartenbach Lichtlabor, Ligna consists of a continuous illuminated line. It is fitted in the Prologe in-Dolma or in-Line. Crucial for architectural lighting, the luminance flow is barely interrupted due to an innovative acrylic optic LDP (linear deglaring prism). This optic is set back above the ceiling level to provide an unsurpassed lit effect.
In addition to the in-Dolma and in-Line linear systems, Prologe 80 is also available as individual surface mounted single or double modules.
See Prologe 80 Surface Mount Specification Sheet for more information on the options described below.
Prologe 80 Surface Mount
Prologe provides functional lighting through discrete presence of simple architectural volumes. The basic concept of this product family is to “capture” light in a small surface mounted box. The standard fixture is made of steel, white and black powder coated finishing. Prologe 80 can come in single or double module configuration.
Prologe 80 – 3” Wide Aperture (Linear Regressed Channel)
in-Dolma and in-Line Recessed Profile System
1
Date: Customer:
Project:
Type: Qty:
Prologe 80 Ligna LED
Prologe 80 Ligna with Prologe 80 Single Modules
Prologe in-Line (regressed module) with Prologe 80 Double Modules
Prologe 80 Double LED in-Dolma
2
Prologe luminaires are ETL Listed for dry and damp locations.Prologe luminaires lend support for LEED credits and certification.LED WARRANTY
5YEAR ADACOMPLIANT
Prologe 80 in-Dolma or in-Line linear system offers the designer incredible flexibility to combine single, double, or continuously lit linear segments in virtually any configuration imaginable within an architecturally detailed regressed channel system. in-Dolma and in-Line systems are made to order for each project. To customize each run, please use the configuration sequence below. Configurations can be remodeled in the field without removing the recessed channel, but may require additional components from Kreon. Configurations are not designed to be adjusted in field by the end user.
Ordering CodesEach run will consist of a linear aluminum profile/channel, and different types of lighting elements. To place an order, please follow these steps to specify each unique run or type. Please write down your choices on the last column, and then transfer the resulting order number to the line below the chart.
kreon prologe linear system
ID – in-Dolma Profile. Downlight modules protrude below ceiling line. Ligna modules are recessed into channel by ¾”
IL – in-Line Profile. Downlight modules are recessed into channel. Ligna modules are recessed into channel 3”
KUPRO_______
aperure size 80 mm 3 1/8” trimless 80
channel length (inches)Channel length in inches. Use three numbers, for example, 92" would be 092. Consult factory for increments smaller than 1". __ __ __
channel finish color (Consult factory for custom RAL finish color options.)
2 − Black Anodized 3 − Natural Anodized (Silver/gray) _________
mounting option RN − Recessed, no flange RF − Recessed with flange _________
ceiling typeDW – Drywall/ sheetrock (trimless installation)
GR − ACT panels with grid ceiling OT − Other, please consult factory _________
light source cct (Ligna element not available in 2700K)
27 − 2700K 30 − 3000K 35 − 3500K 40 − 4000K _________
cri 80 − 80+ min CRI 95 − 95+ min CRI _________
dimming (Multiple circuits per run possible.)
D1 − Triac Phase Dim (120V only)
D2 – 0-10V dim (10%) (120V – 277V)
D3 – Lutron Hi-Lume 1% dim (consult factory for 2-wire, 3-wire, or digital control) _________
single modules in configuration (965 lumens per module)
# – write in total number of single light modules present in configuration (use 0 if none) 1MOD_______
double modules in configuration (965 lumens per module)
# – write in total number of single light modules present in configuration (use 0 if none) 2MOD_______
module finish color* 0 – no single or double light modules 1 – White 2 – Black _________
ligna linear light segment (1100 lm/ft source)
# – write in total number of Ligna linear segments present in configuration (use 0 if none) LIG_______
ligna segment length (Custom lengths available. Consult factory for options.)
00 – no segments 02 – 2' 03 – 3' 04 – 4’ 05 – 5’ 06 – 6’ _________
write your selections in this column
transfer the order number to this line
Ordering Example: KUPROIL-80-124-2-RF-35-80-D2-2MOD0-0-LIG0-00
KUPRO LIG2MOD1MOD
Prologe 80 – 3” Wide Aperture (Linear Regressed Channel)
in-Dolma and in-Line Recessed Profile System
3
Prologe luminaires are ETL Listed for dry and damp locations.Prologe luminaires lend support for LEED credits and certification.LED WARRANTY
5YEAR ADACOMPLIANT
Photometry — For full photometry, please reference IES files on www.kreon.com
Prologe 80 Single Light Module
Light Engine: 965 lumens
CCT: 3000K
CRI: 80+
Power: 9W
Luminaire Output: 565 lumens (63 lm/W)
Prologe Ligna (per ft)
Light Engine: 1100 lumens (per ft)
CCT: 3000K
CRI: 80+
Power: 9W
Luminaire Output: 1135 lumens (126 lm/W)
Prologe 80 – 3” Wide Aperture (Linear Regressed Channel)
in-Dolma and in-Line Recessed Profile System
Linear Profile & Cover PlateMade from extruded aluminum.
Prologe LignaLight insert made of sheet steel with acrylic linear deglaring lens
Prologe 80 LuminaireMade from die cast aluminum alloy.
Finishes• White (RAL 9016)
• Black (RAL 9004)
• RAL color finish upon request
Construction Electrical CharacteristicsLED SpecificationProloge Ligna — Philips Fortimo LED
Prologe 80 Single or Double — Xicato Zhaga compliant LED module with Corrected Cold Phosphor Technology® (remote phosphor to limit color shift over time. Tight color consistency within 1x2 MacAdam Ellipses.
LED Life L80 greater than 50,000 hours.
Correlated Color Temperature (CCT)
• Available in 2700K, 3000K, 3500K and 4000K.
• CRI 80+, 95+.
GearStandard 0-10V dimming, universal voltage (120-277V). For non-dimming applications, cap off dimming wires.
4
Prologe luminaires are ETL Listed for dry and damp locations.Prologe luminaires lend support for LEED credits and certification.LED WARRANTY
5YEAR ADACOMPLIANT
Prologe 80 – 3” Wide Aperture (Linear Regressed Channel)
in-Dolma and in-Line Recessed Profile System
L W
HCustom length in-Line Profile (L + ⅖") x 4 ⅛" x 9 ⅗"
(L + ⅖") x 4 ⅛" x 7 ½"
L x W x H
Custom length in-Dolma Profile
Prologe Single/Double in-Dolma Detail (protrudes below ceiling plane ~1 ⅜")
Prologe Single/Double in-Line Detail (regressed inside channel ~1")
Possible Configuration Examples
Example 1 – Prologe 80 Double LED modules evenly spaced
Example 2 – Prologe Ligna in non-continuous configuration. Multi-sided lens allows light to spill out into regressed channel, highlighting the channel as an architectural element in the ceiling.
Example 3 – Combination of multiple lighting elements to create a totally unique arrangement
Holon 80 Single and Holon 80 Directional in-Cana recessed
Cana, creating rhythms and patterns.
Cana is a recessed mounted channel to add architectural features in the ceiling plane. By cutting slots in the ceiling, Cana emphasizes the thickness of the ceiling while black internal cover plates make the impression there is a void beyond. Within the channel compositions of light, shape and color can be created. The lighting elements on a deepened black continuous background create rhythm and pattern to the ceiling plane.
To add more flexibility, the Cana 80 profile range is expanded with a surface mounted option.
Cana is a versatile profile system that can offer countless lighting solutions with best in class LED technology. Round or square shaped, fully adjustable downlights can be placed anywhere in the Cana profile. According to the needs of the project, beam angle, CRI and dim protocol can be chosen while the lumen package is in relation with the width of the profile.
Holon 80 directional projector luminaire can easily be fitted into the Cana 80 channel. This is a great feature for accent lighting.
Any combination of light modules can be specified in a made to measure channel creating a bespoke installation for every project. Channel runs are delivered pre-assembled for ease of installation on site guaranteeing the finished product is exactly as designed.
Cana 80 – 4” Wide Aperture Linear Channel System
1
Date: Customer:
Project:
Type: Qty:
Linear Profile & Cover Plate – Made from extruded aluminum
Cana 80 Luminaires – Made from die cast aluminum alloy. Integrated optic
Finishes for Cana 80 Linear Profile
Matte black or white powder coated vertical run with matte black coverplate.
Finishes for Cana 80 Linear Channel and Luminaires
• White (RAL 9016)
• Black (RAL 9004)
• RAL color finish on requestElectrical Characteristics
Mounting Options
Recessed, surface, or pendant mounted
Construction
Electrical CharacteristicsLED Specification
Cana 80 Luminaires — Xicato Zhaga compliant LED module with Corrected Cold Phosphor Technology® and remote phosphor to limit color shift over time. Tight color consistency within 1x2 MacAdam Ellipses.
LED Life – L80 greater than 50,000 hours.
Correlated Color Temperature (CCT)
CRI 85+, 98+
Gear
Standard 0-10V dimming, universal voltage (120-277V), or TRIAC phase dimming (120V only). For non-dimming applications, cap off dimming wires. Additional dimming options available. See ordering codes for full list of options. Some lighting elements require different circuits.
Cana 80 Tools of Light (other options available. See Ordering Options section for full range)
Prologe 80 twin in-Cana recessed
2
Cana luminaires are ETL Listed for dry and damp locations.Cana luminaires lend support for LEED credits and certification.LED WARRANTY
5YEAR ADACOMPLIANT
Cana 80 – 4” Wide Aperture Linear Channel System
KUCANA - 80 - __ __ __ - _____ - _____ - ____ - _____ - _____ -
kreon canalinear system
aperturesize
channellength (in) channel finish* mounting
optionceiling type dimming
number ofcircuits
80 mm (internal)
~4” outer dimension
Channel length in inches. Use three numbers, for example, 92 inches would be 092. (Consult factory for increments smaller than 1”)
1 – White
2 – Black
Finish color for vertical panels and exterior (if visible). Coverplates on the inside of channel are always black as standard.
RN – Recessed, no flange
SF – Surface Mounted
DW – Drywall/ sheetrock (trimless installation)
GR – ACT panels with grid ceiling
OT – Other, please consult factory
D1 – Triac Phase Dim (120V only)
D2 – 0-10V dim (10%) (120V – 277V)
D2LD – 0-10V dim (1%) (120-277V)
D3 – Lutron Hi-Lume 1% dim (consult factory for 2-wire, 3-wire, or digital control)
D4 – EldoLED 0% Dim to Dark
(multiple circuits per run possible)
Number of circuits or switch groups for this run
*Consult factory for custom RAL finish color options.
System available with 90 degree or custom corner segments. Consult factory for details and configuration
Ordering Codes and OptionsThe Cana 80 linear system offers the designer incredible flexibility to combine single, double, round, square, or mono-point luminaires in virtually any configuration imaginable within an architecturally detailed regressed channel system. Cana systems are made to order for each project. To customize each run, please use the configuration sequence below. Configurations can be remodeled in the field without removing the recessed channel, but may require additional components from Kreon. Configurations are not designed to be adjusted in field by the end user.
The Cana 80 series are made to measure to suit many architectural needs. Each run will consist of a linear aluminum profile/channel, and different types of lighting elements. To place an order, please follow these steps to specify each unique run or type. First choose the channel details (length, finish color, mounting condition, etc), then select details for each lighting element you want to specify. Transfer individual codes to section at bottom for final specification. Lighting configuration determined via shop drawings.
Linear Channel Details
Lighting Element Ordering Codes Combine with ordering codes for linear segments on page 2. Write down your choices on the grey boxes.
FINISH COLOR CCT CRI (MIN) BEAM ANGLE QUANTITY PER
RUNWHTBLK
27303540
8598
SP 16°NR 28°FL 36°
(Write down desired number of fixtures per
run)
KUCANA-80-PRO1
Electrical Data: 2x 965 lm @ 2x 11W (2x 700 lm @ 2x 11W for 98+ CRI) Minimum Spacing*: 6 1/2” on centerRotation/inclination: 360°/30°Size: 3 1/3” x 3 1/3”
Prologe 80 Single in-Cana**
Prologe 80 Twin in-Cana**FINISH COLOR CCT CRI (MIN) BEAM ANGLE QUANTITY PER
RUNWHTBLK
27303540
8598
SP 16°NR 28°FL 36°
(Write down desired number of fixtures per
run)
KUCANA-80-PROT
Electrical Data: 2x 200 lm @ 2W (2x 160 lm @ 2W for 90+ CRI) Minimum Spacing*: 13” on centerRotation/inclination: 360°/30°Size: 3 1/3 x 7 1/2”
3
Cana luminaires are ETL Listed for dry and damp locations.Cana luminaires lend support for LEED credits and certification.LED WARRANTY
5YEAR ADACOMPLIANT
Cana 80 – 4” Wide Aperture Linear Channel System
Lighting Element Ordering Codes Combine with ordering codes for linear segments on page 2. Write down your choices on the grey boxes.
Holon 80 Single in-Cana**
Holon 80 Twin in-Cana**
FINISH COLOR CCT CRI (MIN) BEAM ANGLE QUANTITY PER
RUNWHTBLK
27303540
8598
SP 16°NR 28°FL 36°
(Write down desired number of fixtures per
run)
KUCANA-80-HOL1
Electrical Data: 965 lm @ 11W (700 lm @ 11W for 98+ CRI) Minimum Spacing*: 6.5” on centerRotation/inclination: 360°/30°Size: 3 1/3” dia
FINISH COLOR CCT CRI (MIN) BEAM ANGLE QUANTITY PER
RUNWHTBLK
27303540
8598
SP 16°NR 28°FL 36°
(Write down desired number of fixtures per
run)
KUCANA-80-HOLT
Electrical Data: 2x 965 lm @ 2x 11W (2x 700 lm @ 2x 11W for 98+ CRI)Minimum Spacing*: 13” on centerRotation/inclination: 360°/30°Size: 3 1/3” x 7 1/2”
Holon 80 Directional in-Cana**FINISH COLOR CCT CRI (MIN) BEAM
ANGLE LUMEN SOURCE QUANTITY PER RUN
WHTBLK
27303540
8598
SP 16°NR 28°FL 36°
SO – 130/ 965 lm (15W)MO – 200/ 1560 lm (21W)HO – 3000/2200 lm (30W)
(Write down desired number
of fixtures per run)
KUCANA-80-HOLD
Electrical Data: 850 lm @ 9W (650 lm @ 9W for 90+ CRI) Minimum Spacing*: 6.5” on centerRotation/inclination: 355°/90°Size: 3 1/3” dia x 8” H
Lighting Elements Ordering Codes Summary (leave blank if not used)
Prologe 80 Single in-Cana: KUCANA-80-PRO1 - __________ - __________ - __________ - __________ - __________
Prologe 80 Twin in-Cana KUCANA-80-PROT - __________ - __________ - __________ - __________ - __________
Holon 80 Single in-Cana KUCANA-80-HOL1 - __________ - __________ - __________ - __________ - __________
Holon 80 Twin in-Cana KUCANA-80-HOLT - __________ - __________ - __________ - __________ - __________
Holon 80 Dir in-Cana KUCANA-80-HOLD - __________ - __________ - __________ - __________ - __________
* The minimum module spacing is the minimum center distance to the next in-Cana 80 module.
**Holon 80 accessories (see Holon 40 Spec Sheet for Details): AG – Hexagonal Anti-Glare Louver DL – Diffusing Lens SC – Sculpture Lens
4
Cana luminaires are ETL Listed for dry and damp locations.Cana luminaires lend support for LEED credits and certification.LED WARRANTY
5YEAR ADACOMPLIANT
Cana 80 – 4” Wide Aperture Linear Channel System
Construction
L x W x H
L x 4" x 5 ½”
cana 80surface mounted
profile
cana 80recessed mounted
profile
www.ocl.com
FEATURES
MEASUREMENTS
MATCHING FIXTURES
SCONCE
DA1-S1SC-51-MW-BTP
DashTM
Pendant • Simple, linear profile can be connected to create long, continuous runs.
• Fixture is rotatable 350 degrees.
• LED luminaire reliability; L70 >70,000 hours at 70% lumen maintenance.
• 3 step MacAdam ellipse color binning.
• Length of mounting arms can be customized.
• Extruded diffuser is frosted white acrylic, UV stable and UL-94 HB flame rated.
• 24 standard powder coat paints offered, however all RAL colors available.
• Contact factory for additional modifications or options.
WT. 3.25 LBS WT. 4.75 LBS WT. 6.25 LBS WT. 7.75 LBS WT. 9.25 LBS
1.25"
6"
38.75" 50.75" 62.75" 74.75"
26.75"
BEGIN HERE
Phone: 314.863.1895 | Fax: 314.863.3278 | www.ocl.com
FIXTURE SPECIFICATIONS
FOR ADDITIONAL INFORMATION GO TO WWW.OCL.COM AND SEARCH: DASH SCONCE
SERIES HANGING SYSTEM SIZE DIFFUSER FINISH LIGHT SOURCE VOLTAGE OPTIONS
DA1
S1SC ARM SCONCE 27
39
51
63
75
MW MATTE WHITE ACRYLIC
BAL BRUSHED ALUMINUM
AWP AUTUMN WHITE PAINT BEP BEIGE PAINTBKP BLACK PAINTBLP BLUE PAINTBMP BRASS METALLIC PAINTBNP BRONZE PAINTBTP BLACK TEXTURED PAINTCHP COPPER HAMMERTONE PAINTCMP COPPER METALLIC PAINTDBP DENIM BLUE PAINTGRP GRAPHITE PAINTGTP GRAY TEXTURED PAINT HEP HENNA PAINTKAP KHAKI PAINTLBP LIGHT BRONZE PAINTMWP MATTE WHITE PAINTRHP RESEDA HAMMERTONE PAINTSAP SAGE GREEN PAINTSGP STEEL GRAY PAINTSHP SILVER HAMMERTONE PAINTSMP SILVER METALLIC PAINTSRP STORM GRAY PAINTSWP SKY WHITE PAINTWTP WHITE TEXTURED PAINT
LED OUTPUT
LED1 LED2
COLOR TEMP
27K30K35K40K
UNV 120-277 DMO 0-10V DIMMING 10%
DM1 0-10V DIMMING 1%
DM3 LUTRON HI-LUME ECOSYSTEM 1%
DM4 LUTRON HI-LUME 3-WIRE 1%
ULD UL DAMP LABEL
SCY 3.5" DIA. SMALL CANOPIES (REQUIRES PRE-INSTALLATION OF 3" MUD RING BY OTHERS)
PRA 4" PROJECTION OFF WALL
SPECIFY CATALOG CODE
- - - - - / - -
SAMPLE CODE: DA1-S1SC-50-MW-BTP-LED1/35K-UNV PHOTOMETRIC INFORMATION AVAILABLE AT WWW.OCL.COM
XX - CONTINUOUS RUN
• Fixture mounts to standard 4" octagon J-box (supplied by others) on power feed side, and requires additional anchors for non-power feed side.
• Fixture is provided with 5" dia. canopy finished to match fixture.
• Various types of dimming drivers available, controls not included.
• Class II LED drivers - 120-277VAC 50/60Hz.
• OCL will include driver enclosure for remote mounting (OCL recommends max 30’ distance from fixture and accessibility after installation).
• Typical LED CRI 80+.
• Fixtures larger than 74.75" will be shipped in connectable segments.
• For photometric data, please visit www.ocl.com.
• For mounting instructions, please contact factory.
• Five year product warranty.
• All specifications and information subject to change without notice. See submittal for current specifications and information.
LIGHT SOURCE PERFORMANCE CHART
SIZE
27" 39" 51" 63" 75"
LED1LUMENS DELIVERED 1080 1620 2160 2700 3240
SYSTEM WATTAGE 12 18 24 30 36
LED2LUMENS DELIVERED 1680 2520 3360 4200 5040
SYSTEM WATTAGE 20 30 40 50 60
MOUNTING INFORMATION
FIXTURE SIZE MOUNTING SPACING
26.75" 25.75" 38.75" 37.75" 50.75" 49.75" 62.75" 61.75" 74.75" 73.75"
4x4 J-BOX
MOUNTING SPACING
PH-SERIES (OUTDOOR)PERFORMANCE HIGH OUTPUTRUBBER COATEDLINEAR LED LIGHTING
Conforms to ANSI/UL Standard 2108Certified to CAN/CSA Standard C22.2 No. 250.0
Ques t i ons/Suppor t 800 -789 -3810 | quo tes@Vo l t L i gh t i ngGroup .com
l i g h t i n g g r o u pVOLT
ULLISTED
C USR
24O
PRODUCT FEATURES• 90+ CRI
• Dimmable
• 50,000 hour life
• 5-year warranty
• UL-listed for indoor and outdoor use
• 3M™ Industrial adhesive backing
• For use with electronic or magnetic power supplies
SPECIFICATIONS
070516EC
Fixture Type:
Project:
Location:
TOTAL WATTAGE USED AT EACH LENGTH
KELVIN COLOR TEMPERATURE SCALE
2,00
0K
2,40
0K
2,70
0K
5,00
0K
6,00
0K
3,00
0K
3,50
0K
4,10
0K
Series PH - Performance High Output (Outdoor)
Input Voltage 24V DC / Constant Voltage
Beam Spread 120°
Max Run Length Unlimited, power every 30ft
Cut Intervals 1-5/16in (33.3mm)
Dimensions (RC) 7/16in (11mm) x 1/8in (3mm)
Dimensions (TS) 1/2in (13mm) x 1/4in (7mm)
CRI 90+
Diode Epistar 2835
Dimming Options PWM, Triac, 0-10V, DMX, Hi-lume
Temp Range -40°F (-40°C) to 149°F (65°C)
MODEL: PH27K-RC-24V PH3K-RC-24V PH35K-RC-24V PH41K-RC-24V PH5K-RC-24V PH3K-TS-24V PH5K-TS-24V
Kelvin 2700K 3000K 3500K 4100K 5000K 3000K 5000KLumens 322 lm/ft 330 lm/ft 340 lm/ft 347 lm/ft 356 lm/ft 330 lm/ft 356 lm/ft
Rating IP65 IP65 IP65 IP65 IP65 IP67 IP67
1ft 2ft 3ft 4ft 5ft 6ft 7ft 8ft 9ft 10ft 11ft 12ft 13ft 14ft 15ft4.2 8.5 12.7 16.8 21 25.4 29.2 32.9 36.9 40.5 44.2 48 51.4 54.6 57.7
16ft 17ft 18ft 19ft 20ft 21ft 22ft 23ft 24ft 25ft 26ft 27ft 28ft 29ft 30ft60.7 64.3 67 70.4 71.8 75.2 77.7 80 83 85.1 86.6 88.7 91.2 93.7 94.6
Depth: 3mm
Cut Intervals: 33.3mm (1-5/16in)
Width: 11mm
151 DC24V
+++
___DC24VDC24V
++
__DC24VDC24V
++
__DC24VDC24V
151
151
151
151DC24V
++
__DC24V
151
151
151
151
(RC)
(RC)
ULV9696 WATT - 24 VOLTCLASS 2 POWER SUPPLY
Fixture Type:
Project:
Location:
Ques t i ons/Suppor t 800 -789 -3810 | quo tes@vo l t l i gh t i ngg roup .com
l i g h t i n g g r o u pVOLT
RoHS O
PRODUCT FEATURES SPECIFICATIONSModel
Input Voltage Range 100~277VACOutput Voltage
Wattage
Power Factor
ULV96
96W
24VDC Constant Voltage
Dimensions 13-3/8”W x 1-3/4”H x 4-5/16”D
0.9
Working Temperature
IP Rating
-40°F ~ 158°F
Dimming TRIAC, PWM, 0-10V
IP65
Conforms to ANSI/UL Standard 8750Certified to CAN/CSA Standard C22.2 No. 250.0-08
• 5 Year Warranty
• TRIAC or 0-10V Dimming
• Free air convection cooling
• Protections: Short circuit / Over current / Over voltage
• Suitable for dry / wet location
• Class 2
24
1-3/4
”
2-15/16”8-7/8”13-3/8”
1-9/16”
4-5/
16”
l i g h t i n gg r o u p
VOLT
Class 2 Power Supply
ULV9624V/96W
www.VoltLightingGroup.com
INPUT
ACL (BRN)
ACN (BLU)
GROUND (YEL-GRN) INPUT: 100~120VAC/1.3A 50/60Hz (TRIAC DIMMING)
OUTPUT: 24VDC/(0~4)A 96WmaxCONSTANT VOLTAGE
Dry/Wet Locations IP65
ta: 122°Ftc: 194°FRoHS
OUTPUT
DIM+ (VLT)
DIM- (GRY)
DC+ (BRN)
DC- (BLU)100~277VAC/1.3A 50/60Hz (PWM/ 0-10V DIMMING)
ULLISTED
C USR
www.birchwoodlighting.com
36
Birchwood Lighting • 2911 Dow Avenue • Tustin, CA 92780 • 714.550.7118 fax 714.550.7151
ConstructionHeavy gauge extruded aluminum housing. 1⁄4” thick precision machined aluminum end-caps. Extruded frosted acrylic lenses specifically engineered to deliver smooth and even illumination while maximizing light and luminaire performance.
Finishes(SC) Satin Clear anodize is standard. (MW) Matte White or (FB) Flat Black powder coat finishes optional. Custom finishes available - consult factory.
Fixture LengthFixtures are available in nominal lengths of 2, 3, 4, 6 and 8 feet. Continuous run mounting available featuring internal adjoining bracket and splines for a straight and precise installation
LED Light Engine SystemLED Light Engines are available as HLO (High Lumen Output) and SLO (Standard Lumen Output) providing efficient illumination. CLO (Custom Lumen Output) allows for end user specified lumen output or tailored wattage consumption for certain models. Consult factory for details.
Dimming Dimming is available with a variety of control protocols and options. Consult factory for availability and specifications.
Acrylic Lens Option(FW) Frosted White.
MountingField-adjustable 1⁄16” aircraft (CSS) Cable Suspension System for use with bracket bar, 5” round canopy and cable gripper device (included). 36” aircraft cable and (G) Gray power cord included as standard. (RAS) Rotational Arm System opton provides 361º directional and lockable aiming with all mounting styles. See ordering guide for possible configurations.
Custom and ModsWe proudly specialize in manufacturing custom and modified luminaires and have the ability to modify most of our standard fixtures. Please contact factory with any inquiries.
FIXTURE SPECIFICATIONS
Modern refinement, high efficiency and application versatility are the definition of CHLOE LED - our 2.25” and 4.75” round linear LED luminaire.
Designed to deliver direct/indirect light to the ceiling, wall or work plane, CHLOE LED is the perfect match for interior applications requiring high LED efficiency within the smooth lines of a sophisticated light instrument. Dimming capability, Two-Circuit switching (2CKT), or Continuous Run (CR) options make CHLOE LED exceptionally versatile for applications such as: open-plan offices, corridors, libraries or health facilities.
CHLOE LED’s streamlined outer profile encases the precision-engineered interior underpinnings of a strong powerhouse while still maintaining an elegant profile and providing LED lighting efficiency.
UL and c-UL listed for dry and damp locations.
CHLOE LEDDirect/Indirect2.25”, 4.75” Round Profile Luminaire
CSS | CSS-R | RAS
Made in the USA
V-0417
CHLOE 475/225 CSS
Type: Job Name:
Due to a program of continuous improvement specifications are subject to change without notice.
© 2017 Birchwood Lighting, Inc. All rights reserved.
www.birchwoodlighting.com
37
Birchwood Lighting • 2911 Dow Avenue • Tustin, CA 92780 714.550.7118 fax 714.550.7151
V-0417
CHLOE LEDDirect/Indirect2.25”, 4.75” Round Profile Luminaire
CSS | CSS-R | RAS
SPECIFICATION CODE
model direct indirect color length finish lens lens voltage driver mounting light engine light engine temp direct indirect
Model
CHL-LED-2257
2.25”rounddirect/ indirect
CHL-LED-4754.75”rounddirect/ indirect
Mounting
CSS-CableSuspended
CSS-R-CableSuspendedRotational
RAS-RotationalArm Mount
Nominal Length
2 - 2’3 - 3’4 - 4’6 - 6’ 8
8 - 8’ 8
CR_1
ContinuousRun
Finish
AnodizedSC- Satin Clear
PowderCoatMW- Matte WhiteFB- Flat BlackCUP-Custom2
Voltage
120 277 3475
Driver
EB - Electronic
DIM - DimmingD1 - 1% (nom) 0-10VD10 - 10% 0-10VHLA26 - Lutron2wireHLA3-Lutron3wireHLH-LutronHEcoSystemHL5-Lutron5seriesEcoSystemDALI-DALI
NOTES1 specifylengthinnominalfeet2 contactfactoryforcustomfinish3 seeoptionsonfollowpagefornon-standardselections4 consultfactoryforEMoptions5availableforEB,D1,D10driversonly6 120Vonly7 225fixturedriverandEMareremote8 225fixture6’lengthismadeupof(2)3’fixturesforCSS-R/RASonly 225fixture8’lengthismadeupof(2)4’fixturesforCSS-R/RASonly
*seeoptionsheetfordetails
ColorTemp
27 - 2700K30 - 3000K35 - 3500K40 - 4000K
LensDirect
FW -FrostedWhite
LensIndirect
FW -FrostedWhite
LED
DirectLightEngine
SLO - StandardLumenOutputHLO - High LumenOutputCLO5__ - CustomLumenOutput
CLOCalculator
CHL-LED-
IndirectLightEngine
SLO - StandardLumenOutputHLO - High LumenOutputCLO5__ - CustomLumenOutput
CSS selections only3CSS Options
Orientation3 -CSS3 -Cable LengthCSS3 - Power Cord ColorCSS3 -CanopyCSS3 - Canopy Finish
CSS
orientation standard standard standard standard cable cordcolor canopy canopy length finish
CSS/CSS-R SPECIFICATION CODEOptions
2CKT-2Circuit Switching
EM4- Emergency Battery Pack
OPTION CODERAS selections only3
RAS Options
RAS3 -Standard CoverPlateRAS3 - CoverPlate FinishRAS3 -ArmLength
RA
S standard cover armplate/ plate length knuckle finish
RAS SPECIFICATION CODE
225 (4000KFWlens)
SLO-SLO - 111lm/[email protected]/ftfixtureinputwatts,643lm/ft.HLO-HLO-109lm/[email protected]/ftfixtureinputwatts,1287lm/ft.CLO-CLO-refertoCLOCalculator
225 LED supplementinfo
475 (4000KFWlens)
SLO-SLO - 109.9lm/[email protected]/ftfixtureinputwatts,968lm/ft.HLO-HLO-103.3lm/wattdelivered@18w/ftfixtureinputwatts,1860lm/ft.CLO-CLO-refertoCLOCalculator475 LED supplementinfo
Dimensions
4 3⁄4”
2 1⁄4”
475
225
TopLens
LEDModule
ExtrudedAluminumHousing
BottomLens
Driver
LEDModule
BottomLens
TopLens
ExtrudedAluminumHousing
LEDModule(RemoteDriver)
LEDModule(RemoteDriver)
Indirect
Direct
CSS/CSS-R/RASoptionscontinuedbelow
www.birchwoodlighting.com
38
Birchwood Lighting • 2911 Dow Avenue • Tustin, CA 92780 • 714.550.7118 fax 714.550.7151
CHLOE LEDDirect/Indirect2.25”, 4.75” Round Profile Luminaire
CSS | CSS-R | RAS
CSS Options
NOTE
1 225CSSfixturelengths6’andlongerrequire3cablespersegment2 knucklesmatchhousingfinish3 225CSS-Rfixturelengths6’andlongeraremadeupofmultiplefixtures,6’=(2)3’sections,8’=(2)4’sections4 notavailablefor225
Orientation/Mounting1 DR/IN - StaticDirect/IndirectR - Rotationalwith1.25”knuckle2,3R2 - Rotationalwith2.25”knuckle2,3R3 - Rotationalwith3.25”knuckle2,3,4
Cable Length Options36 - 36”(standard)72 - 72”120 - 120” Power Cord Color OptionsW - WhiteB - BlackG - Gray(standard)
Canopy OptionsSTND - Bracketbarw/5”roundcanopyNC - Nocanopy1⁄4-20sideexitcablegripper (1⁄4-20studprovidedbyothers) CU - Custom(contactfactory)
Canopy Finish OptionsMW - MatteWhiteSMT - SilverMatteTextureCUP - Custom(contactfactory)
RAS Options
Maxarmlengthswithoutadditionalsupport*Forlengthslongerthanmax,Specify“TB”inoptionsectionforaircraftcabletieback.
Arm Length6 - 6”(standard)9 - 9”12 - 12”18 - 18”CUL - Custom(specifylengthininchesex:CUL28)
Cover Plate FinishSC - SatinClear(standard)MW-MatteWhiteFB-FlatBlackCUP - CustomPowderCoat
4’ 6’ 8’225 18” N/A N/A475 6” 6” 6”
Cover Plate/ Knuckle/Trim Ring4CP-R 4”CoverPlatewith1.25”Knuckle(stnd)4CP-R2 4”CoverPlatewith2.25”Knuckle4CP-R33 4”CoverPlatewith3.25”Knuckle1TR-R 1 1⁄4”TrimRingwith1.25”knuckle1TR-R2 1 1⁄4”TrimRingwith2.25”knuckle1TR-R3 1 1⁄4”TrimRingwith3.25”knuckle
V-0117
NOTE1 knucklesmatchhousingfinish2 225RASfixturelengths6’andlonger aremadeupofmultiplesections3 notavailablefor225
Saki | 27525UD Job Name:___________________ Job Type:___________________ Quantity:___________________ Comments:______________________________________________________
Measurements:
Height Width Length
18.00'' 21.00'' 21.00''
Max OAH
150.00''
Hanging Weight
17.60 lb
Lamping:
LED LED 700 Rated Lumens
1.00 10W LED 3000 Color Temperature
10 total watt 80+ CRI
Dimmable : Standard/Lutron® CL or Leviton®LED Recommended
Shipping:
Carton Weight Carton Width Carton Height Carton Length
22.00 lb 26.38'' 23.43'' 26.38''
Master Pack Qty UPC UPS
1.0000 783209111240 Yes
Finish:
Uddo UD
Material:
Wood
Certification:
Dry Location
Additional:
LED (Included)Slope: 120
Always consult a qualified, licensed electrician before installation of any products....
949.715.1534 | CERNOGROUP.COM ©2017 Cerno, L.L.C. All Rights Reserved | August 2017
16"
13.5"
Mica L pendant
Dimensions: 16" Ø, 13.5" HMaterials: solid wood, polymer
Product weight: 8 lbsEnergy efficient LED light source
Light output: 1250 Lumens (source)Light color: 2700 K (warm) or 3500 K (cool)
Color accuracy: 90+ CRIPower usage: 13W
Dimmable (see driver below)Must use included external LED driver
Brushed aluminum (CM-006) Extended-Profile Square Canopy included, required to house
LED driver (3.25" x 2.25" x 1.25").See website for more canopy information
6' drop length, field adjustableSuitable for a sloped ceiling
Wood grain will varySpecifications subject to change
MATERIAL & FINISH OPTIONS
Mica L part #06-180- -
Wood Bodywalnut (CM-001) Wdark stained walnut (CM-002) D
Lamping2700 K LED 273500 K LED 35
Driver
120-277VAC input voltage 0-10V dimming TRIAC and ELV dimming at 120VAC only
P1
Includesfrosted polymer (CM-024)
Mica, walnut
The Mica is simply a cube, which has been carefully deconstructed to a sculptural state. By way of the fixture’s orientation and petal material composition, it exudes a certain organic symmetry. The Mica pendant acts as a beautiful node, creating a sense of space marked with an ambient glow. Nick SheridanDesigner
Mica, walnut
dark stained walnut (CM-002)
walnut (CM-001)
*Price and Product details are correct only at the time of printing.
Husk 550mm Pendant in MattBlack/Ash
$249.00
SPECIFICATIONS
SKU 010915
Product Type Lighting
Brand Lucci Décor
Warranty12 Months from date ofpurchase
Width / Diameter (mm) 550
Height (mm) 460
Suspension 2000
Voltage 240V
Globe Included No
Globe Type ES
Globe Quantity 1
Wattage (Max) 45W
Room TypeBedroom, Dining Room,Entrance/Stairwell,Kitchen, Living Room
StyleIndustrial, Modern,Scandinavian
Colour Black
DESCRIPTION
Husk 1 light 550mm pendant in matt black and ashwood
The Husk Pendant comprises of a black inner mattefinish shade , which will provide a sultry, soft light ,making it understated and refined, complementing it'sblack cord is an Ash timber turned finial. This pendantwould look remarkable hanging in a continuous line orcluster , over an Island bench or hung low as bedsidelights, this pendant is sure to impress. Click here forinstallation instructions
Date printed 2 August 2017
TECHNICALS
INFO
Icaro Ball
IBIESO050G01 ⁄ IBIESO060G01
INFO INDOOR+OUTDOOR INDOOR IP 20 +OUTDOOR IP 65
FINISHES
white black natural ** cable on measure
* on demand
IBIESO050G01→ ø50–Kg.6,00IBIESO060G01→ ø60–Kg.10,00IBIESO075G01→ ø75–Kg.15,00IBIESO090G01→ ø90–Kg.25,00InDoor — sospensione, suspension,suspension, Hängeleuchte, suspensiónIBOESO050G01→ ø50–Kg.6,00IBOESO060G01→ ø60–Kg.10,00IBOESO075G01→ ø75–Kg.15,00IBOESO090G01→ ø90–Kg.25,00OutDoor — sospensione, suspension,suspension, Hängeleuchte, suspensión
→ InDoor ø50⁄60⁄75I 1×E2742WHESI 1×E2715/20WfluoI 1×E27LED→ InDoor ø 90I 1×E2770WHESI 1×E2725WfluoI 1×E27LEDI 1×E27globo12WLED→ OutDoor ø50⁄60⁄75I 1×E2742WHESI 1×E275WLED→ OutDoor ø90I 1×E2742WHESI 1×E2720WfluoI 1×E27LED
—Sospensioneinfilod’acciaioverniciatotrasparente,biancooneroopaco.Lampadinaavista o con protezione in materiale amovibile.—Suspensioninpaintedtransparent,whiteor black matt steel wire. Light bulb at sight orprotected/coveredbyastripeinremovablematerial.—Suspensionenfild’aciervernitransparent,blancounoirmat.Ampouleàvueouprotégée/couverte par une bande en matériel amovible.— Hängeleuchte aus lackiertem Stahldraht transparent,weißoderschwarzmatt.LeuchtmittelaufSichtodermiteinemBandausabnehmbaremStoffgeschützt/bedeckt.— Suspensión en alambre de acero lacado transparente,blancoonegromate.Bombillaavista o con protección en material extraíble.
*
*
*
> Particolare finiture> Detail finishes> Détail finitions> Detail Oberflächen> Particular acabados
> white
> black
> natural
75cm
29.53"
200c
m
78.7
4"
70cm
27.5
6"
90cm
35.43"
200c
m
78.7
4"
82cm
32.2
8"
19.68"50cm
23.62" 29.53" 35.43"60cm 75cm 90cm
55cm
70cm
82cm
46cm
200c
m
200c
m
200c
m
200c
m
21.6
5"
27.6
5"
32.2
8"
18.1
1"
78.7
4"
78.7
4"
78.7
4"
78.7
4"
50cm
19.68"
200c
m
78.7
4"
46cm
18.1
1"
60cm
23.62"
200c
m
78.7
4"
55cm
21.6
5"
SP
EC
IFIC
AT
ION
SH
EE
T
WWW.LUM INART L IGHT ING.COM
TYPE:
PROJECT NAME:
SP
EC
IFIC
AT
ION
SH
EE
T
WWW.LUM INART L IGHT ING.COM
TYPE:
PROJECT NAME:
TEL 905.695.2055 tol l f ree 1 .800.660.5391FAX 905.695.2056 tol l f ree 1 .800.660.5390
33 West Beaver Creek Road Richmond Hill, Ontario Canada L4B 1L8
FILO, 1-LIGHT LARGE PENDANT
Options Available
Double layered wire meshed metal shade with complimentary finished metal accents
ITEM NO. FINISH SHADE30011-014 Chrome Meshed Metal Shade30011-021 Bronze Meshed Metal Shade
Product Details
Item No. : 30011-021Finish : BronzeShade : Meshed Metal ShadeDiameter : 18"Height : 15"Est. Weight : 7.04 lbsApproval : cETLus
BULB DETAILS
No. of Bulbs : 1Bulb Type : EDISON BULBBulb Voltage : 120VBulb Wattage : 60WBulb Socket : E26Input Voltage : 120VDimmable : YesBulb Included : Yes
TECHNICAL DETAILS
Hanging Support Type : WireWire Length : 72"Canopy Diameter : 4.75"Canopy Height : 2.5"
PROJECT INFORMATION
Job Name: Date: Type:
Comments:
www.eurofase.com
VIBIA LIGHTING, S.L.U. Barcelona, 72 - 74. 08820 El Prat de Llobregat (Barcelona - Spain). Tel 934 796 970. Fax 934 796 [email protected] www.vibia.com
WIREFLOWDesign by Arik Levy.
Reference
0363.
Application
Hanging lamps
Installation type
Surface
Description
Wireflow designed by Arik Levy. Hanging lap. The elegant structure of fine cables and LEDterminal by Wireflow allows the combination of multiple individual pieces to carry out majorgraphic lighting installations which generate a visual opportunity of lines and points of lightand bring a markedly conceptual character to an intangible product. Employing CREA productconfigurator software, the design can be modified to adapt to your specific projectrequirements. The electrical connection point can be positioned on the ceiling or wall.
Materials
Diffuser: PolycarbonateBody: AluminumRods: SteelCeiling rose: Steel
Finish
0363-04 Black lacquer (RAL 9005)
Sketch
Electrical characteristics
3 x LED 4,5W 350mA Total 13.4 W
Led 2700K CRI >80 1471 lm 109 lm/WDriver included: CC - Constant Current 350 mA 100-240V 50/60Hz
ficha.fichatecnicaproducto.regulacion.electronica DALI 1-10V PUSHficha.fichatecnicaproducto.regulacion.opcional SMART
Physical characteristics
1 Box / 0.27 x 0.60 x 0.60 m. / Vol. 0.0972 m³ /Gross weight 5.2 kg. / Net weight 4.7 kg.
Installation and assembly
Please, see the installation manual
Light distribution
Highlight
Lamp used to highlight a specific element.
Photometric data
Efficiency : 46.23%
Coordinate system : CG
Total flux : 1470.80
Maximum value : 320.26
Light position : C=0.00 G=0.00
Symmetry on the planes : Double symmetrical
Isolux : Floor
Light position :
X=0.00m Y=0.00m Z=2.50m
Certificates
230kreonkreon 230 231kreon
Rei Project Private house Location Sint-Denijs, Belgium Photographer Arne Jennard
Black Rei 165 surface mounted White Rei 165 surface mounted
White Rei 300 surface mountedBlack Rei 300 surface mounted
Equipped with high power LEDs, Rei is created to target an optimized approach to sustainability and with a particular attention to energy efficiency. Its balanced and sober design gives Rei a skillful and stylish appearance that will be appreciated for years to come.
Rei
232kreon 233kreon
name rei 165 rei 300
lamptype LED 320lm
3000K, CRI≥80
LED 640lm
3000K, CRI≥80
black ku983212 ku983222
white ku983211 ku983221
visible LxWxH 61/2”x67/8”x11/4” 114/5” x67/8”x11/4”
max. watt 4W 8W
voltage 120V 120V
symbol 2 2gear electr.incl. electr.incl.
dimmable phase control phase control
dimming dimming
location indoor/dry indoor/dry
orientation dwv dwv
optional acc.
recessed mounting
plasterkit ku783010 ku783020
cut-out LxW 67/8”x71/4” 12”x71/4”
min. depth 23/8” 23/8”
Rei Rei Project Private house Architect Themenos Location Belgium Photographer Arne Jennard
Specification Sheet / In-grade / L05
All technical information in this document is subject to change. Copyright © MP Lighting. www.mplighting.com t 1.877.708.1184 f 604.708.1185
L05Application Exterior/interior directional in-grade light for lighting walls,
columns, architectural features or landscape features. Applicable for mounting into floors, walls, ceilings or other surfaces where a non-obtrusive luminaire is required.
IP Rating 66
Mounting Comes with splice box, aluminum flange and level gauge. Can be buried in earth/gravel or cast into concrete/paving stone with or without mounting base.
Electrical 1 Watt x 3 LED / 2.5Watt x 3 LED
Powered by remote dimmable/non-dimmable driver(sold separately).
*See website for recommended drivers *Remote emergency driver / inverter options available. Consult factory
Power Consumption
3.0 Watt
7.5 Watt
Light Output 3.0 Watt, 117~173lm7.5 Watt, 189~275lm*For photometric data, see page 03
Warranty 5 years limited warrantyEstimated useful life of LED is 50,000 hours.
Material Solid anodized aluminum or stainless steel (316), suitable for walk-over and drive-over applications. RoHS compliant.
Drive Over Rating
4400kg/9700 lbs
Weight 2.56lbs (1.16kg) (base extra).
Approval
07-2017
Code Wattage Color Beam Lens Option Angle Bracket* Input Voltage Base Height Finish
L05 - -
3 = 3 x 1W7 = 3 x 2.5W
W27S = 2700K, 80+CRIW30S = 3000K, 80+CRIW35S = 3500K, 80+CRIW41S = 4100K, 80+CRIW20H = 2000K, 90+CRIW30H = 3000K, 90+CRI
* Note: W20H has consis-tent binning that falls within 1.5 MacAdam ellipse.
0 = no angle 30 = 30° angle
MA = matte clear anodizedBA = black anodizedBZ = bronzeS6 = stainless steel 316ABZ = antique bronze
S = spot (12°)N = narrow flood
(30°)F= flood (60°)
HM = hex louver, matte anodized
HB = hex louver, black anodized
* Louver not available with angle bracket
D = DC A = 12V AC
0 = no base2 = 2” (51mm)6 = 6” (152mm)
* Internal angle bracket factory set. Cannot be field adjusted.
Type:
Project:
Modified:
Quantity:
Notes: PLEASE READ - When using a control system, consult dimming system manufacturer
with minimum load before installing 12V AC transformer. Malfunction and damage to
product due to improper dimming system installation or misuse will not be covered under
warranty. Only DC Drivers are recommended for dimming systems. Consult MP Lighting for
recommended drivers.
C = clearF = frost
Specification Sheet / In-grade / L05
All technical information in this document is subject to change. Copyright © MP Lighting. www.mplighting.com t 1.877.708.1184 f 604.708.1185 06-2017
12° (Spot Beam), Clear lens, Matte clear anodized
12° (Spot Beam), Clear lens, Matte clear anodized
30° (Narrow Flood Beam), Clear lens, Matte clear anodized
30° (Narrow Flood Beam), Clear lens, Matte clear anodized
60° (Wide Flood Beam), Clear lens, Matte clear anodized
60° (Wide Flood Beam), Clear lens, Matte clear anodized
3Watt
7.5Watt
DIMENSION:
LIGHT DISTRIBUTION:
Standard Stone Flange without base Standard Stone Flange with MK2 mounting base(MK2 not provided and sold separately)
3/4” NPT
Concrete
Ø4-1/8”Ø105mm
5”127mm
please pour concreteapprox. 6mm above top of flange
please pour concreteapprox. 6mm above top of flange
Ø6-1/2”165 mm
Ø3”76 mm
1”25 mm
1”25 mm
Rebarheight
2-1/2”65 mm
4-1/2”115 mm
2-1/2”65 mm
4-1/2”115 mm
3”76.2mm
Ø3-5/8”Ø92mm
Ø2-5/8”Ø67mm
trim 1/8”
3/4” NPT
Concrete
Ø4-1/8”Ø105mm
5”127mm
please pour concreteapprox. 6mm above top of flange
please pour concreteapprox. 6mm above top of flange
Ø6-1/2”165 mm
Ø3”76 mm
1”25 mm
1”25 mm
Rebarheight
2-1/2”65 mm
4-1/2”115 mm
2-1/2”65 mm
4-1/2”115 mm
3”76.2mm
Ø3-5/8”Ø92mm
Ø2-5/8”Ø67mm
trim 1/8”
3/4” NPT
Concrete
Ø4-1/8”Ø105mm
5”127mm
please pour concreteapprox. 6mm above top of flange
please pour concreteapprox. 6mm above top of flange
Ø6-1/2”165 mm
Ø3”76 mm
1”25 mm
1”25 mm
Rebarheight
2-1/2”65 mm
4-1/2”115 mm
2-1/2”65 mm
4-1/2”115 mm
3”76.2mm
Ø3-5/8”Ø92mm
Ø2-5/8”Ø67mm
trim 1/8”
Insert
Specification Sheet / In-grade / L05
All technical information in this document is subject to change. Copyright © MP Lighting. www.mplighting.com t 1.877.708.1184 f 604.708.1185 09-2015
PHOTOMETRIC DATA:
3W, 3000K, Clear lens 7.5W, 3000K, Clear lens
approx. 847 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 19.2°
3.0’ (914mm)
2.5’ (762mm)
2.0’ (610mm)
1.5’ (457.2mm)
1.0’ (305mm)
0.5’ (152.4mm)377
94.1
41.8
23.5
15.1
10.5
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
Illuminance at a DistanceL053 x 1W 12°3000K Std155 lm
Polar Candela Distribution
approx. 1362 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 19.2°
3.0’ (914mm)
2.5’ (762mm)
2.0’ (609mm)
1.5’ (457mm)
1.0’ (304mm)
0.5’ (152mm)605
151
67.3
37.8
24.2
16.8
Center Beam FC Beam Width
Illuminance at a DistanceL053 x 2.5W 12°3000K Std247 lm
Polar Candela Distribution
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
approx. 536 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.5°
4.7’ (1.43m)
3.9’ (1.18m)
3.2’ (970mm)
2.4’ (731mm)
1.6’ (487mm)
0.8’ (243mm)238
59.6
26.5
14.9
9.54
6.62
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
Illuminance at a DistanceL053 x 1W 30°3000K Std173 lm
Polar Candela Distribution
approx. 858 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.5°
4.7’ (1.43m)
3.9’ (1.18m)
3.1’ (945mm)
2.4’ (731mm)
1.6’ (487mm)
0.8’ (243mm)381
95.4
42.4
23.8
15.3
10.6
Center Beam FC Beam Width
Illuminance at a DistanceL053 x 2.5W 30°3000K Std275 lm
Polar Candela Distribution
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
approx. 122 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 60.4°
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
10.5’ (3.2m)
8.7’ (2.65m)
5.2’ (1.6m)
7.0’ (2.1m)
3.5’ (1.0m)
1.7’ (518mm)54.0
13.5
6.01
3.38
2.16
1.50
Center Beam FC Beam Width
Illuminance at a DistanceL053 x 1W 120°3000K Std117 lm
Polar Candela Distribution
approx. 195 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 60.5°
10.5’ (3.2m)
8.8’ (2.68m)
7.0’ (2.13m)
5.3’ (1.61m)
3.5’ (1.0m)
1.8’ (548mm)86.8
21.7
9.64
5.42
3.47
2.41
Center Beam FC Beam Width
Illuminance at a DistanceL053 x 2.5W 120°3000K Std189lm
Polar Candela Distribution
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
Lumen: 155lm, Spot beam (12°) Lumen: 247lm, Spot beam (12°)
Lumen: 173lm, Narrow flood beam (30°) Lumen: 275lm, Narrow flood beam (30°)
Lumen: 117lm, Flood beam (60°) Lumen: 189m, Flood beam (60°)
Polar Candela Distribution Polar Candela DistributionIlluminance at a Distance Illuminance at a Distance
Portland Flagship 2181 NW Nicolai Street, Portland, OR 97210 P: 503-230-7113
New York 27 Vestry Street, New York, NY 10013 P: 212-226-6113
Trade Sales E: [email protected] P: 1-844-209-7735
Glaze Color Metal Finish
Black (BK) White (WT) Natural Brass (NB)
Polished Nickel (PN)
M o rr i s S co n ce 2 .25" Shown in Black Glaze Canopy, Polished Nickel with Edison Marconi Bulb and Clear Faceted Turtle Shade A p p l i ca t i o n : Wall Mount P ro d u c t o r i g i n : USA U L l is t e d : W a t t a g e : Incandescent, Medium Base Socket Max wattage: 100 V o l t a g e : 120/220 D i m e n s i o n s : Projection: 3.25" Canopy Width: 4.5" G l a z e C o l o r : BK or WT M e t a l F i n i s h : NB or PN D e t a i l s : • Damp rated One year warranty.
schoolhouseelectric.com • (800) 630-7113
V6.14
1
Rei fixtures are ETL Listed for damp locations.Rei fixtures lend support for LEED credits and certification.LED WARRANTY
5YEAR ADACOMPLIANT
Rei – Linear Profile Continuous Linear Recessed, Surface, or Pendant Mounted (Wallwash or Downlight)
Rei treats the illuminated surface to a smooth, homogeneous silent glow of light that enhances the structure and spatial importance of the surface itself.
Wallwash light is often used by lighting designers to contribute to the aesthetic appearance of the room, to exalt volumes, to define walls or maximize the attention to exposed products with a soft glow. Rei, a made-to-measure, slim, recessed- or surface or pendant mounted profile system will safeguard the aesthetic appearance of the interior as well as the functional demands from its inhabitants.
Rei linear system is available as a symmetrical linear downlight with a 55° distribution, or as an asymmetrical wall wash.
1
Date: Customer:
Project:
Type: Qty:
Luminaire
Made from extruded
aluminum.
Recessed Housing
Made from extruded
aluminum.
Finishes• White (RAL 9016)
• Black (RAL 9004)
• RAL color finish upon request
Mounting Options• Recess mounted in drywall/
sheetrock or plaster with trimless spackle flange
• Surface mounted
• Pendant mounted with
aircraft cable
ClassificationsRei fixtures are ETL Listed for damp locations.
Rei fixtures lend support for LEED credits and certification.
Construction Electrical CharacteristicsLED SpecificationCitizen LED
LED Life
L70 greater than 60,000 hours.
Correlated Color Temperature (CCT)• Available in 2700K, 3000K,
3500K and 4000K.
• CRI 80+, 95+.
GearStandard smooth dim to dark with eldoLED SOLOdrive LED driver with 0-10V (consult factory to request DALI control) (120-277V).
Driver is integral to fixture.
REV#10 11/2016
2
Rei fixtures are ETL Listed for damp locations.Rei fixtures lend support for LEED credits and certification.LED WARRANTY
5YEAR ADACOMPLIANT
Rei – Linear Profile Continuous Linear Recessed, Surface, or Pendant Mounted (Wallwash or Downlight)
Ordering Codes and Options
KUREI _____- ____ - ____ - ____ - ____ - ____ - ____ - ____ - ____ -
kreon rei linear system
mounting ceiling type
channel finish
color*
reflector surface
finish
channel length (in)**
light source cct
cri dimming
DN – Symmetrical Downlight
WW – Asymmetrical Wall Wash
RN – Recessed trimless
RF – Recessed w/flange
SF – Surface
PE – Pendant (aircraft cable up to 4')
DW – Drywall/ sheetrock (3/8" to 1" thickness)***
SL – Slot grid or T-Grid w/tegular ACT
FL – T-Grid w/flat ACT tile
OT – Other, please consult factory
1 – White
2 – Black
SP – Specular (only avail. for WW)
MA – Matte natural aluminum (silver/gray)
WH – White matte finish
Fill in total number of inches for channel run using three digits.
For example: 10’ run would be 120 for 120”.
27 – 2700K
30 – 3000K
35 – 3500K (Not available in 95+ CRI)
40 – 4000K
80 – 80+ min CRI
95 – 95+ min CRI
D2 – 0-10V dim to 10% (120 to 277V)
D3 – Lutron Hi-Lume dim to 1% (consult factory for 2-wire, 3-wire, or digital control) (120 to 277V)
D4 – EldoLED 0% dim to dark (standard 0-10V control. Consult factory for DALI control) (120 to 277V)
Ordering Example: KUREI-WW-RN-DW-1-SP-048-30-80-D4
Ordering Example: KUREIWW-RN-DW-1-SP-048-30-80-D4
* Consult factory for custom RAL finish color options
**Minimum length is approx. 14” with D2 dim, or 20” with D4 dimming option. Available in approx. 3” increments. Consult factory for exact lengths possible.
***Adjustable mounting bracket accommodates drywall/sheetrock/plaster ceiling between 3/8" and 1" thickness
Photometry — For full photometry, please reference IES files on www.kreon.com
KUREIDN-RC-DW-1-MA-024-30-90-D4 (per foot, symmetrical)
Light Engine: 1202 lumens
CCT: 3000K
CRI: 80+
Power: 8W
Luminaire Output: 585 lumens/ft
KUREIWW-RC-DW-1-SP-024-30-90-D4 (per foot, wallwash)
Light Engine: 1040 lumens
CCT: 3000K
CRI: 80+
Power: 8W
Luminaire Output: 425 lumens/ft
REV#10 11/2016
3
Rei fixtures are ETL Listed for damp locations.Rei fixtures lend support for LEED credits and certification.LED WARRANTY
5YEAR ADACOMPLIANT
Rei – Linear Profile Continuous Linear Recessed, Surface, or Pendant Mounted (Wallwash or Downlight)
Mounting/Installation
DOWNLIGHT RECESSED MOUNTED (DRYWALL)
DOWNLIGHT SURFACE MOUNTED
WALLWASHER RECESSED MOUNTED (DRYWALL)
RECESSED MOUNTED
MOUNTING BRACKET OPEN
WALLWASHER SURFACE MOUNTEDTRIMLESS RECESSED
T-BAR MOUNTING, NO FLANGE PENDANT MOUNTING
TRIMLESS RECESSED
2 3/4"
L
2 1/4"
3.07"
2.87"
L
1/4" — 20 THREADED RODAND HARDWARE BY OTHERS
4 1/8" (104.8)
FIXTURE MOUNTING BRACKETRECESS PROFILE
RECESS PROFILEINSTALLATION BRACKET
Mounting Bracket
Mounting Bracket
4 1/4"
Note: Total plenum clearance required including power feed.
2 ¼"
2 ¾"
2 ¼"
2 ¾"
SECTION VIEW:
TOP VIEW:
REV#10 11/2016
DATE NOTES
PROJECT
TYPE
126 CHESTNUT STREET, WARWICK RI 02888 T 401.467.8232 F 401.941.2960 [email protected] WWW.DAYOLITE.COM REV080316 PAGE 1
Ordering Guide (choose from the lists below and specify)
MODEL STYLE DISTRIBUTION SHIELDINGCOLORTEMP (CCT)
DELIVERED LUMENS1 SIZE3 MOUNTING FINISH VOLTAGE OPTIONS2
WPPL 2 D UWPPL 2
D = Direct SI = Satin Ice
Acrylic CA = Clear Acrylic Consult fac-tory for shatter resistant polycarbonate option.
30 = 3000K35 = 3500K40 = 4000K50 = 5000K
LO = 390/ft (6W/ft, 65LPW) SO = 520/ft (8W/ft, 65LPW)Consult factory for additional lumen pack-ages. All values are nominal.
2 = 2 ft 4 = 4 ft6 = 6 ft8 = 8 ftFor other en-ter row length in feet and inches (e.g. 48 = 48 ft.)
G = GridMG = Mini Grid SG = Slot GridF = Flanged (recessed)TRL = Trimless (recessed)
W = WhiteCC = Custom Color
Universal 120/277V
DIM10 = 0-10V DimmingDIMST = Step DimmingDIMHL = Dimming LutronD A L I = DALI DimmingD A Y = Daylight SensorO C C = Occupancy SensorE P C = Emergency Pack
(remote mount only) E M C = Emergency Circuit
Perimeter | WPPL-2 LED Luminaire
HOUSING: Die-formed, 20-gauge, cold rolled steel housing. Joiner ends are notched for continuous appearance in row-mounted applications. Independently adjustable housing and LED/driver tray allow for continuous wall-to-wall illumination.
REFLECTOR: Reflector is die-formed, 20-gauge cold rolled steel finished in high gloss white enamel.
SHIELDING: Satin Ice acrylic is standard. Clear Acrylic and shatter resistant polycarbonate are also available.
LEDS: LED modules in 30/35/40 & 50K CCT, 80+ CRI (90 CRI available). Lumen maintenance minimum L70 = 50,000 hours @ 25 C° ambient temperature. 3 SDCM color consistency. ZhagaTM compliant (Book 7).
ELECTRICAL: Class 2 AOC electronic driver, 120/277V input, PF > 90%, THD < 20 @ 120v. 0-10V dimming to 5%. -20C to +50C operating range. <24dB Class A sound rating. 0-10V dimming is standard.
MOUNTING: Standard installation is an exposed inverted T-bar ceiling. Fixtures may also be installed in miniature grid, slot grid or drywall/plaster ceilings.
FINISH: Fixture housing and steel components are finished in baked white enamel applied over a five-stage pretreatment process.
CERTIFICATION: Luminaires are cETLus listed conforming to UL STD. 1598 and certified to CSA STD C22.2 NO. 250.0. Inherently protected; suitable for insulated ceilings. Dry loction only. Union Made in the United States of America. I.B.E.W. RoHS compliant.
DirectPerimeter
2 1/2"[63.5 mm]
6 1/2"[165.1 mm]
4.0"[101.6 mm]
1Delivered Lumens are Standard Ouput (SO) and Low Output (LO) at 80+CRI 4000K CCT with LED optimized Satin Ice acrylic (SI) lens. Use the following multiplier to estimate delivered lumens at other CCTs: 3000K = 0.96, 3500K = 0.98, 5000K = 1.02. Consult factory for 90CRI. See www.dayolite.com for the list of all Standard Options.20-10V Dimming to 5% is standard on all LED luminaires. Day-O-Lite will pre-wire driver with +/- dimming leads if DIM10 option is selected. Recommended dimmers include Leviton IllumaTech IP7 Series and Philips Sunrise - SR1200ZTUNV. Step Dimming (DIMST) is 40%/100%. Consult factory for Lutron (DIMHL) and DALI dimming and controls options.3WPPL-2 may be ordered in continuously illuminated rows in precise increments. An innovative internal telescoping end provides uninterupted illumination in grid ceiling installations or applications requiring corner-to-corner illumination of any length wall. Contact factory for additional details.
Day-O-Lite, a division of SCW Corporation. All rights reserved. The Day-O-Lite logo is a registered trademark of SCW Corporation.
3 1/2"[81.3 mm]
126 CHESTNUT STREET, WARWICK RI 02888 T 401.467.8232 F 401.941.2960 [email protected] WWW.DAYOLITE.COM REV080316 PAGE 2
Perimeter | WPPL-2
Installation Preparation
Linear Sections & Corners
PhotometryCANDELA DISTRIBUTION
Vert.Angle 0 22.5 45 67.5 90
0 1168 1168 1168 1168 11685 1198 1175 1168 1162 1163
10 1145 1148 1149 1116 110415 1108 1108 1072 1004 97820 1065 1063 943 835 80325 1037 995 825 705 65530 981 904 696 577 53335 900 790 580 459 39840 809 686 470 351 31845 734 565 367 293 29050 634 457 295 263 25255 527 353 255 220 20860 434 268 211 174 16465 333 204 167 137 12970 235 145 119 102 9675 144 97 83 70 6780 72 58 50 44 4185 25 25 23 20 2090 5 6 5 4 3
WPPL-2-D-DP-40-SO-4-G
WPPL-2 is field adjustable to create precise, fully illuminated wall-to-wall illumination. The housing (1) is installed first and adjusts up to 10" in length without cutting. A unique "over-under" LED/driver tray (2) is then fitted inside and expands to fit the housing. Fixtures in continuous rows are joined with included hardware as shown below. Consult factory for complete installation instructions.
Illuminated length may be shorter than overall fixture length. Consult factory for actual illuminated dimension and options. For new construction installations where schedules prevent on-site measurements, Day-O-Lite will fabricate corners from specific field dimensions after fixtures are installed.
4' Nominal8' Nominal
C 290º Corner
( ) º A CAngular Corner
For any angular corner, ( )º must be specified and dimensions must be included on the layout For any pattern, a layout must accompany the order.
C O R N E R S Corners and fixture extensions are custom fabricated to precise dimensions. Please indicate the specific requirements on the layout.
J O I N E R S
J B 2 JB2-90º (Corner) Joiner Box
J B 3 JB3-3-Way (Tee) Joiner Box
J B 4 JB4-4-Way (Cross) Joiner Box
I L CFully Illuminated90º Corner
4000K CCT WATTS: 32 LUMENS: 2088 LPW = 65 Optical Distribution: 100% Direct
Day-O-Lite reserves the right to change specifications without notice for product improvement.
(1) Housing adjusts 10"
(2) LED/driver tray adjusts to fill housing for continous unbroken illumination
D-SeriesLED Parking Garage
Specifications
Catalog Number
Notes
Type
IntroductionThe D-Series LED Parking Garage luminaire provides energy savings of 88% when replacing 175W metal halide luminaires. With an expected service life of over 100,000 hours (10+ years of 24/7 operation), up to ten metal halide lamp changes are avoided over the life of the product. All of this adds up to quick paybacks and a very low total cost of ownership.
Five dedicated precision refractive optics allow the D-Series Parking Garage luminaire to meet the desired criteria for minimums, verticals and uniformity. Exceptional glare control is achieved while delivering the required vertical illumination.
Length: 17-3/4”(45.1 cm)
Width: 8-1/2”(21.6 cm)
Height: 3-7/16”(8.7 cm)
Weight (max):
16 lbs(7.3 kg)
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • www.lithonia.com© 2013-2016 Acuity Brands Lighting, Inc. All rights reserved.
Hit the Tab key or mouse over the page to see all interactive elements.
DSXPGSRM U Surface mount kitDSXPGYK DWHXD U Yoke/trunnion accessory, white (other finishes available)DSXPGHS U House-side shield (1 per light engine)DSXPGBDS DWHXD U Bird shroud for pendant or yoke, white (other finishes
available)DSXPGBDSSJ DWHXD U Bird shroud for SRM on surface J-box only, white (other
finishes available)
AccessoriesOrdered and shipped separately.
L
H
W
NOTES
1 Available with 700mA or 1000mA option only.2 Not available with 347 or 480V. 3 AMBPC only available with 530mA or 700mA. 4 MVOLT driver operates on any line voltage from 120-277V
(50/60 Hz). Specify 120, 208, 240 or 277 options only when ordering with fusing (SF, DF options).
5 N/A with one light engine (10C). Only available with 700mA or 1000mA.
6 Compatible with 3/4” NPT pendant stem, by others.7 Also available as a separate accessory; see Accessories
information at left.8 Single fuse (SF) requires 120, 277 or 347 voltage option.
Double fuse (DF) requires 208, 240 or 480 voltage option.9 Not available with XAD or XAD924 options.
Ordering Information EXAMPLE: DSXPG LED 20C 1000 40K T5M MVOLT DWHXD
10 See the electrical section on page 3 for more details.11 DMG not available with all PIR or XAD options.12 Dimming driver standard. Available in layouts up to 30’. Not available with 347V
or 480V. Not available with fusing. 13 PIR & PIR3FC3V specifies the Acuity Controls SBOR 10 ODP motion/ambient
sensor, the PIRH & PIRH3FC3V specifies the Acuity Controls SBOR 6 ODP motion/ambient sensor.
14 All 924 devices specify the Acuity Controls XPA RL1 DSI EM XPoint wireless light controller as a UL924 listed device for emergency lighting.
15 XAD PIR specifies the Acuity Controls XPA SBOR10 wireless controller, the XAD924 PIR & PIR3FC3V924 specify the Acuity Controls XPA SBOR10_EM wireless controller, the XAD PIRH specifies the Acuity Controls XPA SBOR6 wireless controller, and the XAD924 PIRH & PIR3FC3V924 specify the XPA SBOR6_EM wireless controller.
DSXPG LED
Series LEDs Drive current Color temperature Distribution Voltage Mounting
DSXPG LED 10C 10 LEDs (one engine) 1, 2
20C 20 LEDs (two engines)30C 30 LEDs (three engines)
350 350 mA530 530 mA700 700 mA1000 1000 mA (1 A)
30K 3000 K40K 4000 K50K 5000 KAMBPC Amber phosphor converted3
T5E Type V, entryway
T5M Type V, medium
T5W Type V, wideT5R Type V, rectangular
ASY Asymmetric
MVOLT 4
120 4
208 4
240 4
277 4
347 5
480 5
Shipped included
(blank) Pendant mount 6 (36-inch length supply leads)
SRM Surface mount (12-inch length supply leads)
Shipped separately
YK Yoke/trunnion mount 7
Options Finish (required)
Shipped installedHS House-side shield (housing
visor) 7
SF Single fuse (120, 277, 347V) 8,9
DF Double fuse (208, 240, 480V) 8,9
SPD Separate surge protection 10
DMG 0-10V dimming driver (no controls)11,12
PIR Motion/ambient sensor for 8-15' mounting heights 13
PIRH Motion/ambient sensor for 15-30' mounting heights13
Shipped installedPIR3FC3V Motion/ambient sensor for 8-15' mounting heights and for typical applications requiring daylight harvesting
and Title 24 compliance13
PIRH3FC3V Motion/ambient sensor for 15-30' mounting heights and typical applications requiring daylight harvesting and Title 24 compliance 13
PIR3FC3V924 Motion/ambient sensor for emergency circuits for 8-15’ mounting heights 12, 14, 15
PIRH3FC3V924 Motion/ambient sensor for emergency circuits for 15-30’ mounting heights 12, 14, 15
XAD XPoint™ Wireless enabled12
XAD924 XPoint™ Wireless enabled for emergency circuit12, 14, 15
XAD PIR XPoint™ Wireless enabled motion/ambient sensor for 8-15' mounting heights 12, 15
XAD PIRH XPoint™ Wireless enabled motion/ambient sensor for 15-30' mounting heights 12, 15
XAD924 PIR XPoint™ Wireless enabled motion/ambient sensor for emergency circuits for 8-15’ mounting heights12, 14, 15
XAD924 PIRH XPoint™ Wireless enabled motion/ambient sensor for emergency circuits for 15-30’ mounting heights12, 14, 15
Shipped separately
SLVRD Pendant swivel cover for round or octagonal j-box
SLVSQ Pendant swivel cover for 4” square j-box
BDS Bird shroud 7
DWHXD WhiteDNAXD Natural
aluminumDDBXD Dark bronze
DSXPG
Rev. 11/22/16
Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts.
Performance Data
Lumen Output
Electrical Load
Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F).
Lumen Ambient Temperature (LAT) Multipliers
Ambient Lumen Multiplier0°C 32°F 1.02
10°C 50°F 1.01
20°C 68°F 1.00
25°C 77°F 1.00
30°C 86°F 1.00
40°C 104°F 0.98
Projected LED Lumen MaintenanceData references the extrapolated performance projections for the platforms noted in a 25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM-80-08 and projected per IESNA TM-21-11).
To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory.
Operating Hours 0 25,000 50,000 100,000
Lumen Maintenance Factor
DSXPG LED 10C 1000
1.0 0.97 0.94 0.90
DSXPG LED 30C 1000
1.0 0.93 0.89 0.80
DSXPG LED 30C 700
1.0 0.98 0.97 0.95
Current (A)
LEDs Drive Current (mA)
System Watts 120V 208V 240V 277V 347V 480V
10C700 26W 0.25 0.15 0.13 0.11 – –
1000 37W 0.37 0.21 0.18 0.16 – –
20C
350 25W 0.23 0.13 0.12 0.10 – –
530 37W 0.33 0.19 0.17 0.14 – –
700 46W 0.43 0.25 0.22 0.19 0.15 0.11
1000 74W 0.68 0.39 0.34 0.29 0.23 0.17
30C
350 35W 0.33 0.19 0.16 0.14 – –
530 53W 0.50 0.29 0.25 0.22 – –
700 67W 0.66 0.38 0.33 0.29 0.23 0.17
1000 107W 1.01 0.58 0.50 0.44 0.35 0.25
Light Engines
Drive Current (mA)
System Watts
Dist.
Type
30K 40K 50K AMBPCLumens B U G LPW Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW
10C
(10 LEDs)
700 mA 26W
ASY 2,601 0 0 1 100 2,793 1 0 1 107 2,810 1 0 1 108 2,253 1 0 1 87T5E 2,731 1 0 0 105 2,933 1 0 0 113 2,951 1 0 0 113 2,366 1 0 0 91T5M 2,742 1 0 0 105 2,945 2 0 0 113 2,963 2 0 0 114 2,376 2 0 0 91T5R 2,700 2 0 2 104 2,899 2 0 2 112 2,918 2 0 2 112 2,339 2 0 2 90T5W 2,570 2 0 1 99 2,760 2 0 1 106 2,777 2 0 1 107 2,226 2 0 1 86
1000 mA 37W
ASY 3,647 1 0 1 99 3,917 1 0 1 106 3,941 1 0 1 107T5E 3,830 1 0 0 104 4,113 2 0 0 111 4,138 2 0 0 112T5M 3,846 2 0 0 104 4,130 2 0 1 112 4,156 2 0 1 112T5R 3,786 2 0 2 102 4,066 2 0 2 110 4,091 3 0 3 111T5W 3,604 2 0 1 97 3,870 2 0 1 105 3,894 3 0 1 105
20C
(20 LEDs)
350 mA 25W
ASY 2,798 1 0 1 112 3,004 1 0 1 120 3,023 1 0 1 121T5E 2,938 1 0 0 118 3,155 1 0 0 126 3,174 2 0 0 127T5M 2,950 2 0 0 118 3,168 2 0 0 127 3,188 2 0 1 128T5R 2,905 2 0 2 116 3,119 2 0 2 125 3,139 2 0 2 126T5W 2,765 2 0 1 111 2,969 2 0 1 119 2,987 2 0 1 119
530 mA 37W
ASY 4,041 1 0 1 109 4,339 1 0 1 117 4,366 1 0 1 118 3,525 1 0 1 95T5E 4,243 2 0 0 115 4,556 2 0 0 123 4,584 2 0 0 124 3,702 2 0 0 100T5M 4,260 2 0 1 115 4,575 2 0 1 124 4,604 2 0 1 124 3,717 2 0 1 100T5R 4,195 2 0 2 113 4,504 3 0 3 122 4,532 3 0 3 122 3,660 3 0 3 99T5W 3,992 2 0 1 108 4,287 3 0 1 116 4,314 3 0 1 117 3,484 3 0 1 94
700 mA 46W
ASY 5,129 1 0 1 112 5,508 1 0 1 120 5,543 1 0 1 120 4,337 1 0 1 94T5E 5,386 2 0 0 117 5,784 2 0 0 126 5,820 2 0 0 127 4,554 2 0 0 99T5M 5,409 2 0 1 118 5,808 3 0 1 126 5,844 3 0 1 127 4,573 3 0 1 99T5R 5,325 3 0 3 116 5,718 3 0 3 124 5,754 3 0 3 125 4,502 3 0 3 98T5W 5,068 3 0 1 110 5,443 3 0 1 118 5,477 3 0 1 119 4,285 3 0 1 93
1000 mA 74W
ASY 7,083 1 0 1 96 7,606 1 0 1 103 7,653 1 0 2 103T5E 7,437 2 0 0 101 7,986 2 0 0 108 8,036 2 0 1 109T5M 7,468 3 0 1 101 8,020 3 0 1 108 8,070 3 0 1 109T5R 7,353 3 0 3 99 7,896 3 0 3 107 7,945 3 0 3 107T5W 6,998 3 0 1 95 7,515 3 0 2 102 7,562 3 0 2 102
30C
(30 LEDs)
350 mA 35W
ASY 4,174 1 0 1 119 4,482 1 0 1 128 4,510 1 0 1 129T5E 4,382 2 0 0 125 4,706 2 0 0 134 4,735 2 0 0 135T5M 4,401 2 0 1 126 4,726 2 0 1 135 4,755 3 0 1 136T5R 4,333 2 0 2 124 4,653 3 0 3 133 4,682 3 0 3 134T5W 4,124 2 0 1 118 4,428 3 0 1 127 4,456 3 0 1 127
530 mA 53W
ASY 5,996 1 0 1 113 6,438 1 0 1 121 6,478 1 0 1 122 5,333 1 0 1 101T5E 6,296 2 0 0 119 6,760 2 0 0 128 6,803 2 0 0 128 5,599 2 0 0 106T5M 6,322 3 0 1 119 6,789 3 0 1 128 6,831 3 0 1 129 5,623 3 0 1 106T5R 6,224 3 0 3 117 6,684 3 0 3 126 6,726 3 0 3 127 5,536 3 0 3 104T5W 5,924 3 0 1 112 6,362 3 0 1 120 6,401 3 0 1 121 5,269 3 0 1 99
700 mA 67W
ASY 7,557 1 0 1 113 8,115 1 0 2 121 8,166 1 0 2 122 6,504 1 0 2 97T5E 7,936 2 0 0 118 8,521 3 0 1 127 8,575 3 0 1 128 6,829 3 0 1 102T5M 7,969 3 0 1 119 8,557 3 0 1 128 8,610 3 0 2 129 6,858 3 0 1 102T5R 7,846 3 0 3 117 8,425 3 0 3 126 8,478 3 0 3 127 6,752 3 0 3 101T5W 7,467 3 0 1 111 8,019 3 0 2 120 8,069 3 0 2 120 6,426 3 0 2 96
1000 mA 107W
ASY 10,213 1 0 2 95 10,967 2 0 2 102 11,036 2 0 2 103T5E 10,724 3 0 1 100 11,516 3 0 1 108 11,588 3 0 1 108T5M 10,769 3 0 1 101 11,564 3 0 2 108 11,636 3 0 2 109T5R 10,603 3 0 3 99 11,385 4 0 4 106 11,457 4 0 4 107T5W 10,092 3 0 2 94 10,837 4 0 2 101 10,904 4 0 2 102
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • www.lithonia.com© 2013-2016 Acuity Brands Lighting, Inc. All rights reserved.
DSXPG
Rev. 11/22/16
To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s D-Series Parking Garage homepage. Photometric Diagrams
FEATURES & SPECIFICATIONS
INTENDED USE The energy savings, long life, and easy-to-install design of the D-Series LED Parking Garage luminaire make it the smart choice for commercial and municipal garage applications. It is designed to meet or exceed recommended illuminance criteria when installed as a direct replacement of most HID parking garage luminaires.
CONSTRUCTION Two-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. Modular design allows for ease of maintenance and future light engine upgrades. The LED drivers are mounted in direct contact with the casting to promote low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP66) and is suitable for hose-down.
FINISH Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling.
OPTICS Precision-molded proprietary acrylic lenses provide five different photometric distributions tailored specifically to parking garage applications. Light engines are available in 3000 K (80 min. CRI), 4000 K (70 min. CRI) or 5000 K (65 min. CRI) configurations.
ELECTRICAL Light engines consist of 10 high-efficacy LEDs mounted to a metal-core circuit board to maximize heat dissipation and promote long life. The electronic driver has a power factor of >90%, THD <20%, and a minimum 2.5 KV surge rating. When ordering the SPD option, a separate surge protection device is installed within the luminaire which meets a minimum Category C low operation (per ANSI/IEEE C62.41.2).
INSTALLATION Standard configuration accepts a rigid or free-swinging 3/4” NPT stem (by others) for pendant mounting. The surface mount option attaches to a 4x4” recessed or surface mount outlet box using a quick-mount kit (included); kit contains galvanized steel luminaire and outlet box plates and a full pad gasket. Kit has an integral mounting support that allows the luminaire to hinge down for easy electrical connections. Luminaire and plates are secured with set screws. Also available with a yoke/trunnion mount option with 3/4” NPT provision for flexible conduit entry (conduit by others); height can be adjusted from 10-18”. Supply leads are 12” in length as standard. For longer supply leads, please consult factory.
LISTINGS CSA certified to U.S. and Canadian standards. Light engines and luminaire are IP66 rated. Rated for -40°C minimum ambient.
DesignLights Consortium® (DLC) qualified product — Parking Garage Luminaires category. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to confirm which versions are qualified.
WARRANTY Five-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice.
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • www.lithonia.com© 2013-2016 Acuity Brands Lighting, Inc. All rights reserved.
DSXPG
Rev. 11/22/16
Isofootcandle plots for the DSXPG LED 30C 700 40K. Distances are in units of mounting height (8’).
LEGEND
5.0 fc
10.0 fc
0.1 fc
0.5 fc
1.0 fc
20.0 fc
Test
No
. 501
870P
22 t
este
d in
acc
ord
ance
with
IE
SNA
LM
-79-
08.
4
3
2
1
0
-4
-3
-2
-1
4 3 2 1 0 4321
T5W
Test
No
. 501
868P
22 t
este
d in
acc
ord
ance
with
IE
SNA
LM
-79-
08.
4
3
2
1
0
-4
-3
-2
-1
4 3 2 1 0 4321
T5M
Test
No
. 501
871P
22 t
este
d in
acc
ord
ance
with
IE
SNA
LM
-79-
08.
4
3
2
1
0
-4
-3
-2
-1
4 3 2 1 0 4321
T5E
Test
No
. 501
869P
22 t
este
d in
acc
ord
ance
with
IE
SNA
LM
-79-
08.
4
3
2
1
0
-4
-3
-2
-1
4 3 2 1 0 4321
T5R
Motion Sensing
0 ft
10
0 m
3
31 23 15.5 8 0 ft 8 15.5 23 31
9.4 7 4.8 2.3 0 m 2.3 4.8 7 9.4
SIDE VIEW TOP VIEW
31
15.5
0 ft
15.5
31
9.4
4.8
0 m
4.8
9.4
0 ft
10
0 m
3
31 23 15.5 8 0 ft 8 15.5 23 31
9.4 7 4.8 2.3 0 m 2.3 4.8 7 9.4
SIDE VIEW TOP VIEW
31
15.5
0 ft
15.5
31
9.4
4.8
0 m
4.8
9.4
0 ft
10
0 m
3
31 23 15.5 8 0 ft 8 15.5 23 31
9.4 7 4.8 2.3 0 m 2.3 4.8 7 9.4
SIDE VIEW TOP VIEW
31
15.5
0 ft
15.5
31
9.4
4.8
0 m
4.8
9.4
0 ft
10
0 m
3
31 23 15.5 8 0 ft 8 15.5 23 31
9.4 7 4.8 2.3 0 m 2.3 4.8 7 9.4
SIDE VIEW TOP VIEW
31
15.5
0 ft
15.5
31
9.4
4.8
0 m
4.8
9.4
The motion sensor options (PIR360SS or PIRH360SS) have 360° of passive infrared sensing and adjustable bi-level dimming to save energy when there is no occupancy.
Mounting OptionsSurface Mounting Yoke/Trunnion
Mounting
D-SeriesLED Parking Garage
Specifications
Catalog Number
Notes
Type
IntroductionThe D-Series LED Parking Garage luminaire provides energy savings of 88% when replacing 175W metal halide luminaires. With an expected service life of over 100,000 hours (10+ years of 24/7 operation), up to ten metal halide lamp changes are avoided over the life of the product. All of this adds up to quick paybacks and a very low total cost of ownership.
Five dedicated precision refractive optics allow the D-Series Parking Garage luminaire to meet the desired criteria for minimums, verticals and uniformity. Exceptional glare control is achieved while delivering the required vertical illumination.
Length: 17-3/4”(45.1 cm)
Width: 8-1/2”(21.6 cm)
Height: 3-7/16”(8.7 cm)
Weight (max):
16 lbs(7.3 kg)
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • www.lithonia.com© 2013-2016 Acuity Brands Lighting, Inc. All rights reserved.
Hit the Tab key or mouse over the page to see all interactive elements.
DSXPGSRM U Surface mount kitDSXPGYK DWHXD U Yoke/trunnion accessory, white (other finishes available)DSXPGHS U House-side shield (1 per light engine)DSXPGBDS DWHXD U Bird shroud for pendant or yoke, white (other finishes
available)DSXPGBDSSJ DWHXD U Bird shroud for SRM on surface J-box only, white (other
finishes available)
AccessoriesOrdered and shipped separately.
L
H
W
NOTES
1 Available with 700mA or 1000mA option only.2 Not available with 347 or 480V. 3 AMBPC only available with 530mA or 700mA. 4 MVOLT driver operates on any line voltage from 120-277V
(50/60 Hz). Specify 120, 208, 240 or 277 options only when ordering with fusing (SF, DF options).
5 N/A with one light engine (10C). Only available with 700mA or 1000mA.
6 Compatible with 3/4” NPT pendant stem, by others.7 Also available as a separate accessory; see Accessories
information at left.8 Single fuse (SF) requires 120, 277 or 347 voltage option.
Double fuse (DF) requires 208, 240 or 480 voltage option.9 Not available with XAD or XAD924 options.
Ordering Information EXAMPLE: DSXPG LED 20C 1000 40K T5M MVOLT DWHXD
10 See the electrical section on page 3 for more details.11 DMG not available with all PIR or XAD options.12 Dimming driver standard. Available in layouts up to 30’. Not available with 347V
or 480V. Not available with fusing. 13 PIR & PIR3FC3V specifies the Acuity Controls SBOR 10 ODP motion/ambient
sensor, the PIRH & PIRH3FC3V specifies the Acuity Controls SBOR 6 ODP motion/ambient sensor.
14 All 924 devices specify the Acuity Controls XPA RL1 DSI EM XPoint wireless light controller as a UL924 listed device for emergency lighting.
15 XAD PIR specifies the Acuity Controls XPA SBOR10 wireless controller, the XAD924 PIR & PIR3FC3V924 specify the Acuity Controls XPA SBOR10_EM wireless controller, the XAD PIRH specifies the Acuity Controls XPA SBOR6 wireless controller, and the XAD924 PIRH & PIR3FC3V924 specify the XPA SBOR6_EM wireless controller.
DSXPG LED
Series LEDs Drive current Color temperature Distribution Voltage Mounting
DSXPG LED 10C 10 LEDs (one engine) 1, 2
20C 20 LEDs (two engines)30C 30 LEDs (three engines)
350 350 mA530 530 mA700 700 mA1000 1000 mA (1 A)
30K 3000 K40K 4000 K50K 5000 KAMBPC Amber phosphor converted3
T5E Type V, entryway
T5M Type V, medium
T5W Type V, wideT5R Type V, rectangular
ASY Asymmetric
MVOLT 4
120 4
208 4
240 4
277 4
347 5
480 5
Shipped included
(blank) Pendant mount 6 (36-inch length supply leads)
SRM Surface mount (12-inch length supply leads)
Shipped separately
YK Yoke/trunnion mount 7
Options Finish (required)
Shipped installedHS House-side shield (housing
visor) 7
SF Single fuse (120, 277, 347V) 8,9
DF Double fuse (208, 240, 480V) 8,9
SPD Separate surge protection 10
DMG 0-10V dimming driver (no controls)11,12
PIR Motion/ambient sensor for 8-15' mounting heights 13
PIRH Motion/ambient sensor for 15-30' mounting heights13
Shipped installedPIR3FC3V Motion/ambient sensor for 8-15' mounting heights and for typical applications requiring daylight harvesting
and Title 24 compliance13
PIRH3FC3V Motion/ambient sensor for 15-30' mounting heights and typical applications requiring daylight harvesting and Title 24 compliance 13
PIR3FC3V924 Motion/ambient sensor for emergency circuits for 8-15’ mounting heights 12, 14, 15
PIRH3FC3V924 Motion/ambient sensor for emergency circuits for 15-30’ mounting heights 12, 14, 15
XAD XPoint™ Wireless enabled12
XAD924 XPoint™ Wireless enabled for emergency circuit12, 14, 15
XAD PIR XPoint™ Wireless enabled motion/ambient sensor for 8-15' mounting heights 12, 15
XAD PIRH XPoint™ Wireless enabled motion/ambient sensor for 15-30' mounting heights 12, 15
XAD924 PIR XPoint™ Wireless enabled motion/ambient sensor for emergency circuits for 8-15’ mounting heights12, 14, 15
XAD924 PIRH XPoint™ Wireless enabled motion/ambient sensor for emergency circuits for 15-30’ mounting heights12, 14, 15
Shipped separately
SLVRD Pendant swivel cover for round or octagonal j-box
SLVSQ Pendant swivel cover for 4” square j-box
BDS Bird shroud 7
DWHXD WhiteDNAXD Natural
aluminumDDBXD Dark bronze
DSXPG
Rev. 11/22/16
Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts.
Performance Data
Lumen Output
Electrical Load
Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F).
Lumen Ambient Temperature (LAT) Multipliers
Ambient Lumen Multiplier0°C 32°F 1.02
10°C 50°F 1.01
20°C 68°F 1.00
25°C 77°F 1.00
30°C 86°F 1.00
40°C 104°F 0.98
Projected LED Lumen MaintenanceData references the extrapolated performance projections for the platforms noted in a 25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM-80-08 and projected per IESNA TM-21-11).
To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory.
Operating Hours 0 25,000 50,000 100,000
Lumen Maintenance Factor
DSXPG LED 10C 1000
1.0 0.97 0.94 0.90
DSXPG LED 30C 1000
1.0 0.93 0.89 0.80
DSXPG LED 30C 700
1.0 0.98 0.97 0.95
Current (A)
LEDs Drive Current (mA)
System Watts 120V 208V 240V 277V 347V 480V
10C700 26W 0.25 0.15 0.13 0.11 – –
1000 37W 0.37 0.21 0.18 0.16 – –
20C
350 25W 0.23 0.13 0.12 0.10 – –
530 37W 0.33 0.19 0.17 0.14 – –
700 46W 0.43 0.25 0.22 0.19 0.15 0.11
1000 74W 0.68 0.39 0.34 0.29 0.23 0.17
30C
350 35W 0.33 0.19 0.16 0.14 – –
530 53W 0.50 0.29 0.25 0.22 – –
700 67W 0.66 0.38 0.33 0.29 0.23 0.17
1000 107W 1.01 0.58 0.50 0.44 0.35 0.25
Light Engines
Drive Current (mA)
System Watts
Dist.
Type
30K 40K 50K AMBPCLumens B U G LPW Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW
10C
(10 LEDs)
700 mA 26W
ASY 2,601 0 0 1 100 2,793 1 0 1 107 2,810 1 0 1 108 2,253 1 0 1 87T5E 2,731 1 0 0 105 2,933 1 0 0 113 2,951 1 0 0 113 2,366 1 0 0 91T5M 2,742 1 0 0 105 2,945 2 0 0 113 2,963 2 0 0 114 2,376 2 0 0 91T5R 2,700 2 0 2 104 2,899 2 0 2 112 2,918 2 0 2 112 2,339 2 0 2 90T5W 2,570 2 0 1 99 2,760 2 0 1 106 2,777 2 0 1 107 2,226 2 0 1 86
1000 mA 37W
ASY 3,647 1 0 1 99 3,917 1 0 1 106 3,941 1 0 1 107T5E 3,830 1 0 0 104 4,113 2 0 0 111 4,138 2 0 0 112T5M 3,846 2 0 0 104 4,130 2 0 1 112 4,156 2 0 1 112T5R 3,786 2 0 2 102 4,066 2 0 2 110 4,091 3 0 3 111T5W 3,604 2 0 1 97 3,870 2 0 1 105 3,894 3 0 1 105
20C
(20 LEDs)
350 mA 25W
ASY 2,798 1 0 1 112 3,004 1 0 1 120 3,023 1 0 1 121T5E 2,938 1 0 0 118 3,155 1 0 0 126 3,174 2 0 0 127T5M 2,950 2 0 0 118 3,168 2 0 0 127 3,188 2 0 1 128T5R 2,905 2 0 2 116 3,119 2 0 2 125 3,139 2 0 2 126T5W 2,765 2 0 1 111 2,969 2 0 1 119 2,987 2 0 1 119
530 mA 37W
ASY 4,041 1 0 1 109 4,339 1 0 1 117 4,366 1 0 1 118 3,525 1 0 1 95T5E 4,243 2 0 0 115 4,556 2 0 0 123 4,584 2 0 0 124 3,702 2 0 0 100T5M 4,260 2 0 1 115 4,575 2 0 1 124 4,604 2 0 1 124 3,717 2 0 1 100T5R 4,195 2 0 2 113 4,504 3 0 3 122 4,532 3 0 3 122 3,660 3 0 3 99T5W 3,992 2 0 1 108 4,287 3 0 1 116 4,314 3 0 1 117 3,484 3 0 1 94
700 mA 46W
ASY 5,129 1 0 1 112 5,508 1 0 1 120 5,543 1 0 1 120 4,337 1 0 1 94T5E 5,386 2 0 0 117 5,784 2 0 0 126 5,820 2 0 0 127 4,554 2 0 0 99T5M 5,409 2 0 1 118 5,808 3 0 1 126 5,844 3 0 1 127 4,573 3 0 1 99T5R 5,325 3 0 3 116 5,718 3 0 3 124 5,754 3 0 3 125 4,502 3 0 3 98T5W 5,068 3 0 1 110 5,443 3 0 1 118 5,477 3 0 1 119 4,285 3 0 1 93
1000 mA 74W
ASY 7,083 1 0 1 96 7,606 1 0 1 103 7,653 1 0 2 103T5E 7,437 2 0 0 101 7,986 2 0 0 108 8,036 2 0 1 109T5M 7,468 3 0 1 101 8,020 3 0 1 108 8,070 3 0 1 109T5R 7,353 3 0 3 99 7,896 3 0 3 107 7,945 3 0 3 107T5W 6,998 3 0 1 95 7,515 3 0 2 102 7,562 3 0 2 102
30C
(30 LEDs)
350 mA 35W
ASY 4,174 1 0 1 119 4,482 1 0 1 128 4,510 1 0 1 129T5E 4,382 2 0 0 125 4,706 2 0 0 134 4,735 2 0 0 135T5M 4,401 2 0 1 126 4,726 2 0 1 135 4,755 3 0 1 136T5R 4,333 2 0 2 124 4,653 3 0 3 133 4,682 3 0 3 134T5W 4,124 2 0 1 118 4,428 3 0 1 127 4,456 3 0 1 127
530 mA 53W
ASY 5,996 1 0 1 113 6,438 1 0 1 121 6,478 1 0 1 122 5,333 1 0 1 101T5E 6,296 2 0 0 119 6,760 2 0 0 128 6,803 2 0 0 128 5,599 2 0 0 106T5M 6,322 3 0 1 119 6,789 3 0 1 128 6,831 3 0 1 129 5,623 3 0 1 106T5R 6,224 3 0 3 117 6,684 3 0 3 126 6,726 3 0 3 127 5,536 3 0 3 104T5W 5,924 3 0 1 112 6,362 3 0 1 120 6,401 3 0 1 121 5,269 3 0 1 99
700 mA 67W
ASY 7,557 1 0 1 113 8,115 1 0 2 121 8,166 1 0 2 122 6,504 1 0 2 97T5E 7,936 2 0 0 118 8,521 3 0 1 127 8,575 3 0 1 128 6,829 3 0 1 102T5M 7,969 3 0 1 119 8,557 3 0 1 128 8,610 3 0 2 129 6,858 3 0 1 102T5R 7,846 3 0 3 117 8,425 3 0 3 126 8,478 3 0 3 127 6,752 3 0 3 101T5W 7,467 3 0 1 111 8,019 3 0 2 120 8,069 3 0 2 120 6,426 3 0 2 96
1000 mA 107W
ASY 10,213 1 0 2 95 10,967 2 0 2 102 11,036 2 0 2 103T5E 10,724 3 0 1 100 11,516 3 0 1 108 11,588 3 0 1 108T5M 10,769 3 0 1 101 11,564 3 0 2 108 11,636 3 0 2 109T5R 10,603 3 0 3 99 11,385 4 0 4 106 11,457 4 0 4 107T5W 10,092 3 0 2 94 10,837 4 0 2 101 10,904 4 0 2 102
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • www.lithonia.com© 2013-2016 Acuity Brands Lighting, Inc. All rights reserved.
DSXPG
Rev. 11/22/16
To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s D-Series Parking Garage homepage. Photometric Diagrams
FEATURES & SPECIFICATIONS
INTENDED USE The energy savings, long life, and easy-to-install design of the D-Series LED Parking Garage luminaire make it the smart choice for commercial and municipal garage applications. It is designed to meet or exceed recommended illuminance criteria when installed as a direct replacement of most HID parking garage luminaires.
CONSTRUCTION Two-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. Modular design allows for ease of maintenance and future light engine upgrades. The LED drivers are mounted in direct contact with the casting to promote low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP66) and is suitable for hose-down.
FINISH Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling.
OPTICS Precision-molded proprietary acrylic lenses provide five different photometric distributions tailored specifically to parking garage applications. Light engines are available in 3000 K (80 min. CRI), 4000 K (70 min. CRI) or 5000 K (65 min. CRI) configurations.
ELECTRICAL Light engines consist of 10 high-efficacy LEDs mounted to a metal-core circuit board to maximize heat dissipation and promote long life. The electronic driver has a power factor of >90%, THD <20%, and a minimum 2.5 KV surge rating. When ordering the SPD option, a separate surge protection device is installed within the luminaire which meets a minimum Category C low operation (per ANSI/IEEE C62.41.2).
INSTALLATION Standard configuration accepts a rigid or free-swinging 3/4” NPT stem (by others) for pendant mounting. The surface mount option attaches to a 4x4” recessed or surface mount outlet box using a quick-mount kit (included); kit contains galvanized steel luminaire and outlet box plates and a full pad gasket. Kit has an integral mounting support that allows the luminaire to hinge down for easy electrical connections. Luminaire and plates are secured with set screws. Also available with a yoke/trunnion mount option with 3/4” NPT provision for flexible conduit entry (conduit by others); height can be adjusted from 10-18”. Supply leads are 12” in length as standard. For longer supply leads, please consult factory.
LISTINGS CSA certified to U.S. and Canadian standards. Light engines and luminaire are IP66 rated. Rated for -40°C minimum ambient.
DesignLights Consortium® (DLC) qualified product — Parking Garage Luminaires category. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to confirm which versions are qualified.
WARRANTY Five-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice.
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • www.lithonia.com© 2013-2016 Acuity Brands Lighting, Inc. All rights reserved.
DSXPG
Rev. 11/22/16
Isofootcandle plots for the DSXPG LED 30C 700 40K. Distances are in units of mounting height (8’).
LEGEND
5.0 fc
10.0 fc
0.1 fc
0.5 fc
1.0 fc
20.0 fc
Test
No
. 501
870P
22 t
este
d in
acc
ord
ance
with
IE
SNA
LM
-79-
08.
4
3
2
1
0
-4
-3
-2
-1
4 3 2 1 0 4321
T5W
Test
No
. 501
868P
22 t
este
d in
acc
ord
ance
with
IE
SNA
LM
-79-
08.
4
3
2
1
0
-4
-3
-2
-1
4 3 2 1 0 4321
T5M
Test
No
. 501
871P
22 t
este
d in
acc
ord
ance
with
IE
SNA
LM
-79-
08.
4
3
2
1
0
-4
-3
-2
-1
4 3 2 1 0 4321
T5E
Test
No
. 501
869P
22 t
este
d in
acc
ord
ance
with
IE
SNA
LM
-79-
08.
4
3
2
1
0
-4
-3
-2
-1
4 3 2 1 0 4321
T5R
Motion Sensing
0 ft
10
0 m
3
31 23 15.5 8 0 ft 8 15.5 23 31
9.4 7 4.8 2.3 0 m 2.3 4.8 7 9.4
SIDE VIEW TOP VIEW
31
15.5
0 ft
15.5
31
9.4
4.8
0 m
4.8
9.4
0 ft
10
0 m
3
31 23 15.5 8 0 ft 8 15.5 23 31
9.4 7 4.8 2.3 0 m 2.3 4.8 7 9.4
SIDE VIEW TOP VIEW
31
15.5
0 ft
15.5
31
9.4
4.8
0 m
4.8
9.4
0 ft
10
0 m
3
31 23 15.5 8 0 ft 8 15.5 23 31
9.4 7 4.8 2.3 0 m 2.3 4.8 7 9.4
SIDE VIEW TOP VIEW
31
15.5
0 ft
15.5
31
9.4
4.8
0 m
4.8
9.4
0 ft
10
0 m
3
31 23 15.5 8 0 ft 8 15.5 23 31
9.4 7 4.8 2.3 0 m 2.3 4.8 7 9.4
SIDE VIEW TOP VIEW
31
15.5
0 ft
15.5
31
9.4
4.8
0 m
4.8
9.4
The motion sensor options (PIR360SS or PIRH360SS) have 360° of passive infrared sensing and adjustable bi-level dimming to save energy when there is no occupancy.
Mounting OptionsSurface Mounting Yoke/Trunnion
Mounting
Page 1 FINL 11/16/16
marklighting.com | 888-834-5684 | ©2013-2016 Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
Series Length
Fin Depth Below Face of Door
Linear LED Output1
Linear LED Color Temp Driver Voltage Finish Integrated Controls Options
FINL Fin LED 2 FT 2’
3 FT 3’
4 FT 4’
5 FT 5’
6 FT 6’
8 FT 8’
2 D 2”
3 D 3”
4 D 4”
N 6W/LF 40 LM/W
H 12W/LF 40 LM/W
30 3000K > 80 CRI
35 3500K > 80 CRI
40 4000K > 80 CRI
AD Constant Current Driver, 0 -10V 10% Dimming
120
277CF Clear sides,
frosted edges
FF Frosted sides, frosted edges
(Blank) No controls
N100 N100 nLight without Lumen mgt
N80 N80 nLight with 80% Lumen mgt
N80EMG N80 nLight with 80% Lumen mgt for use with generator supply EM power
N100EMG N100 nLight without Lumen mgt for use with generator supply EM power
NX Dimming, No nLight
ECO Lutron Ecosystem Interface Module
CP Chicago plenum
DPL Damp location listing
TM
TM
The Fin LED SeriesFin LED is a decorative accent fixture with a clean,
geometric form that complements any environment.
Versatile and ornamental, it is perfect for making an
aesthetic statement, creating intriguing patterns of light
or enhancing other design elements.
Fin can be mounted horizontally or vertically and is
available in a choice of clear sides with frosted edges or
frosted sides with frosted edges. Lengths range from 2
to 8 feet, and the depth below the fixture door can be 2,
3 or 4 inches.
Housing Housing and internal components fabricated from 20-gauge, cold-rolled steel.
Finish Matte white.
Reflector Precision-formed steel; high reflectant white.
Shielding Nominal 1 1/2”-thick acrylic fin.
LED Components Linear: Nichia® - LED chips (>80 CRI)Normal Output: 6 W/LFHi Output: 12 W/LF
DriverAccuDrive LED Driver allows for 0-10V dimming, flicker-free from 2 to 100%. Universal input voltage 120-277VAC, 50/60Hz. Integrated thermal fold-back management to prevent over heating.
Color ConsistencyThe Acuity Brands circuit boards for the linear LED components use a precise
binning algorithm which creates a consistent color temperature from board to board. The color a variation of no greater than a 2.5 Step MacAdam (2.5SDCM) along the black body locus from board to board.
Integrated ControlsStandard nLight® embedded controls make luminaire addressable- allowing it to digitally communicate with other nLight enabled controls such as dimmers, switches, occupancy sensors and photocontrols. Simply connect all the nLight enabled control devices using standard CAT5 Cabling.
Lumen ManagementAn optional lumen management system provides onboard intelligence that actively manages the LED light source so that constant lumen output is maintained over the system’s life, creating a consistently illuminated environment while preventing energy waste. (Option: n80)
Mounting Recessed in sheetrock ceiling; rod-mounted to structure. Consult factory for other ceiling types.
Certification CSA certified to meet U.S. and Canadian standards, rated for Chicago plenum.
Warranty 5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResorurces/Terms and conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
Technical Drawings
Ordering
Type:
Project:
Catalog Number:
Example: FINL 2FT 2D N35AD 120 CF N80
DO NOT TYPE HERE. Autopopulated field.
Specification Features
Notes1. Refer to chart for wattage and lumen output.
*CCT (35K)*Consult factory for customized lumen and wattage*Based on calculated values
Fixture Performance - FIN 4 2D
Lumens Output Normal High
Fixture Style FF CF FF CF
Delivered Lumens 918 970.5 1663.8 1860
Input Watts 27.49 27.52 46.37 46.34
Lumens/Watt 33.39 35.26 35.88 40.13
Prudential Ltg. reserves the right to change design specifications or materials without notice. Please visit www.prulite.com for most current data. © 2014 All rights reserved – All products manufactured at: Prudential Ltg. 1774 E. 21st Street, Los Angeles, CA 90058
PRULITE.COM 213.746.0360
Snap™ (Satin Acrylic) | Linear, SurfaceLED
03-17-2017
1Architectural Wrap
R1-LED35-MO-04-SAL2480 Delivered Lumens21.7 Watts114 lm/w
*R1-LED4LO-SAL is DLC QPL listed. For other DLC listings, please consult factory.
Our basic lighting building block.
This perfectly scaled wrap simply snaps quickly, neatly and securely into a wide range of spaces. Industry-leading optical peformance and integrated controls help make Snap one of our best-selling fixtures. Our Linear Prismatic (LLP) lens turns Snap into an oustanding Stack fixture ideal for warehouses, manufacturing, libraries and more. See HalfSnap for a smaller profile.
R1-LLP
S1
Type:
Job:
5LED WARRANTY
YEAR5
LED WARRANTY
YEAR
114 LM/WUP TO
LOW MEDIUM STANDARD
lm/ft 480 620 900w/ft 4.2 5.5 9
Satin Acrylic Lens (SAL)
Lumen output may vary +/- 5% 4000K used for lm/ft estimates above 3500K –2% llf, 3000K –4%, 2700K –6%See LED Details PDF for more info
2 3/8˝ 2 3/8˝
3˝3˝
SERIES LED COLOR
OUT-PUT
NOMINAL LENGTH
SHIELD-ING
COLOR/ FINISH
VOLT-AGE
MOUNT-ING
CEILING SYSTEMS
DRIVERS OPTIONS & CONTROLS
R1 RoundS1 Square
LED3 3000KLED35 3500KLED4 4000KLED3-90 90CRILED35-90 90CRILED4-90 90CRI
LO Low MO Me-dium SO Stan-dardPROG Pro-gram-mable Light Output (Specify desired lm/ft or w/ft)
2´3´4´6´8´R___ (Row length in 1´ increments)
Row lengths are typically made up of 8’ and 4’ fixtures, {eg. 12’ row is (1) 8’ and (1) 4’}, unless symmetric row lengths are requested.
SAL Satin AcrylicLLP Linear Prismatic Acrylic for LED (Stack optics, R1 Only)
NOTE: See other Snap LED spec sheet for White Acrylic Lens
TMW Textured Matte WhiteYGW Gloss White (Standard)
Y__ Premium ColorCC Custom ColorGLV Galva-nized with Black end-plates
347UNV (120-277)
SUR Surface or Wall MountCA48˝ or 96˝ Aircraft Cable (Adjustable)
X1 T-Bar ExposedX3 Hard CeilingX6 Slot Grid
ND Non-DimmingDM01 0-10v, 1% Dimming (Standard)
DM10 0-10v, 10% DimmingSTEP Step Dimming, 100-50-Off, Osram NOTE: Lumens and watts per foot may differ for STEP drivers, consult factoryLDE5 5%, Lutron (Ecosystem)
LDE1 1%, Lutron (Soft Fade to Black, Ecosystem)
L3DA 1%, Lutron, 3 WireECO 1% 0-10v, EldoLED ECDA 1% DALI, EldoLEDSOLO 0.1% 0-10v, EldoLED (Dim to Dark)
SODA 0.1% DALI, EldoLED (Dim to Dark)
EML* Emergency Battery, Low (850 delivered lumens)
EMH* Emergency Battery, High (1175 delivered lumens)
SENSORS: 205** WattStopper PIR Occupancy 205-STEP: Dim to 50% 205-DM: Dim to 1%
211-FSP L2 /L3 WattStopper DLH & Infrared Occupancy (Adds 6˝ to fixture length)
505 WattStopper Ultrasonic Occupancy (SUR on wall mount only) 505-STEP: Dim to 50% 505-DM: Dim to 1%
LUX Phillips DLH3E** Enlighted 2-Wire DLH & Environmental
TRS Tamper-Resistant ScrewsEBCP1G / 2G Electrical Box Cover Plate/Mud Ring (Single or dual gang)
PRUBIN Meticulous Binning and Labeling every LED Board within a 2-Step Mac-Adams EllipseCORNERS:
C2 Unlit 90° 2-WayC2-120 Unlit 120° 2-WayC3 Unlit 90° 3-WayC3-120 Unlit 120˚ 3-WayC4 Unlit 90° 4-Way
*4’ or longer (remote for < 4’) **Adds 3˝ to fixture length
Cl i ck here
Prudential Ltg. reserves the right to change design specifications or materials without notice. Please visit www.prulite.com for most current data. © 2014 All rights reserved – All products manufactured at: Prudential Ltg. 1774 E. 21st Street, Los Angeles, CA 90058
PRULITE.COM 213.746.0360
Snap™ (Satin Acrylic) | Linear, SurfaceLED
03-17-2017
2Architectural Wrap
LUMEN MAINTENANCE Designed to last with cool running mid-power LEDs projected to
maintain 90% (L90) of their initial output for 100,000 hours (at HO), and L70 exceeding 150,000 hours.
LED SYSTEM LED modules and drivers are field replaceable.
PROG (optional) Programmable light output. Specify desired lumens or watts per linear foot. Min: 2.5 w/ft, consult factory for requests above 12 w/ft.
BINNING Standard binning (all Prudential LED boards) includes testing at the chip level and board integration to provide consisten color temperature within a 3-step MacAdam ellipse, with +/- 5% lumen output range and +/- .004 Duv.
PRUBIN™ Prudential Ltg’s exclusive ‘job binning’ method that ensures color temperature consistency across all luminaires on a project. Meticulously testing and labeling EVERY LED BOARD to +/- 25 lumens, +/- 50k CCT and +/- .004 Duv — while also separating positive from negative — allows us to match color, hue and intensity throughout a project and provides a consistent color temperature within a 2-step MacAdam ellipse.
LABELS ETL damp labeled and I.B.E.W. manufactured
ELECTRICAL Must specify LED dimming controls. LED fixtures have constant current driver(s) with less than 20% THD when loaded to a minimum of 60%. Drivers sink a maximum of 6mA per driver. DM10 LED drivers are 0-10V dimmable and are compatible with most 0-10V wall slide dimmers and direct 0-10V analog signal dimmers. Max driver size 1.65˝ w x 1.25˝ h.
CONSTRUCTION
Housing Die-formed 22-gauge steel, >20% PC recycled, 100% recyclable
End Caps Spring-fastened aluminum, >25% PC recycled, 100% recyclable
Lens Single-piece (up to 8´ lengths) extruded acrylic, 100% recyclable
MOUNTING Surface mounted to walls or ceilings or suspended by cable
WEIGHT 2 lbs/ft
WARRANTY Single-source, 5 year limited warranty covers standard components and construction
PHOTOMETRICS STACK OPTICS (R1 ONLY)
Medium Output:
R1-LED35-MO-04-SAL2480 Delivered Lumens21.7 Watts114 lm/w4000 CCTLight Labs Test #L021508903
Zonal Lumen Summary:0-90 = 84%90-180 = 16%
Low Output:
R1-LED4LO-04-LLP2216 Delivered Lumens19.1 Watts116 lm/w4000 CCTLight Labs Test #L121401601
Zonal Lumen Summary:0-90 = 93%90-180 = 7%632 414
Vertical Angle 0 25 45 65 90
0 632 632 632 632 632
5 633 632 631 629 627
15 620 617 610 602 591
25 584 577 565 548 531
35 534 534 502 476 449
45 479 463 431 393 357
55 421 398 357 309 263
65 355 330 282 225 172
75 285 258 208 148 88
85 215 191 144 83 22
90 186 164 120 62 1
95 169 150 110 57 0
105 142 127 94 49 0
115 119 107 80 42 0
125 100 89 67 35 0
135 81 72 52 27 0
145 62 55 37 20 0
155 43 35 26 14 0
165 24 19 15 10 0
175 9 9 9 8 0
180 0 0 0 0 0
Vertical Angle 0 25 45 65 90
0 414 414 414 414 414
5 412 428 456 484 501
15 409 528 743 920 995
25 405 698 981 939 878
35 400 782 770 653 621
45 385 646 507 451 437
55 322 395 306 290 288
65 193 205 179 178 178
75 73 99 103 104 103
85 15 50 67 70 68
90 0 37 57 61 60
95 0 30 50 55 55
105 0 22 38 45 46
115 0 16 30 36 38
125 0 14 23 28 31
135 0 11 17 22 24
145 0 10 14 17 19
155 0 9 11 13 14
165 0 9 9 10 10
175 0 0 0 0 0
180 0 0 0 0 0
(OPTIONAL)
Prudential Ltg. reserves the right to change design specifications or materials without notice. Please visit www.prulite.com for most current data. © 2014 All rights reserved – All products manufactured at: Prudential Ltg. 1774 E. 21st Street, Los Angeles, CA 90058
PRULITE.COM 213.746.0360
Snap™ (Satin Acrylic) | Linear, SurfaceLED
03-17-2017
3Architectural Wrap
EBCP Electrical Box Cover Plate
ADJOINING DETAIL
Allow space for access TRS Tamper Resistant Screw
For paint chip samples, please email: [email protected]
Choose from one of our Premium Colors with no set-up fee.
YSL – Silver
YRG – Rain Grey
YSK – Sky
YSA – Sapphire
YDA – Daffodil
YFG – Forest Green
YUM – Umber
YPE – Pewter
YST – Storm Grey
YDU – Dusk
YBB – Black
YSR – Sunset Red
YSN – Sand
YBR – Matte Bronze
YSW - Satin Seashell White
YMB – Satin Military Blue
YBY – Matte Boysenberry
YCH – Metallic Champagne 303
YIB – Matte Interstate Blue
YIG – Satin Ivy Green
YBK – Matte Interior Black Flat
MOUNTING LOCATIONS
Cable Mount
Surface Mount
7/8˝ Diam. K.O.
11/16˝ K.O. / Stem & Powerfeed
CONTROL SENSORS
3EEnlighted 2-Wire PIR Daylight, Motion & Environmental SensorNOTE: Adds 3˝ to length, enlighted control
module required
LUX Phillips LuxSense Daylight Harvest-ing, used with Phillips HFR DriverNOTE: Adds 3˝ to length
205WattStopper PIR OccupancyNOTE: Adds 3˝ to length
211 WattStopper High/Low Passive Infrared Occupancy/DLH Sensor
NOTE: Adds 6˝ to fixture length in center of fixture, FSP - L2 or L3 lens only
505 WattStopper Ultrasonic Occupancy SensorNOTE: Small cut-out of lens around sensor,
Surface mount on walls only
Consult factory for other sensors, please email: [email protected]
NOTE: Sensor plate will match fixture color finish
3˝ Sensor Module added to fixture length for 205, LUX and 3E, end of run or between fixtures
24˝, 36˝ or 48˝1/4˝1/4˝ 57/16˝57/16˝
2 3/8˝ typ.1/8˝ Endplate
3 1/4 ̋typ.1/8̋ Endplate
211 Sensor Module adds 6˝ to fixture length, in the center of a 4’, 6’ or 8’ fixture
24 ,̋ 36 ̋or 48˝24 ,̋ 36 ̋or 48˝ 6˝
2 3/8̋ typ.1/8̋ Endplate
3 1/4 ̋typ.1/8̋ Endplate
1/4˝ 1/4˝57/16˝ 57/16˝
2 3/8̋ typ.1/8̋ Endplate
3 1/4 ̋typ.1/8̋ Endplate
721/16 or 961/16
Wall cutout to clear fixture mounting holeFixture
mounting hole
Mounting screw (By others)
OPTIONAL ELECTRICAL BOX COVERS7/8˝ Dia. K.O. will accommodate 2˝x 4˝ or 4˝x 4˝ J-Box
Prudential Ltg. reserves the right to change design specifications or materials without notice. Please visit www.prulite.com for most current data. © 2014 All rights reserved – All products manufactured at: Prudential Ltg. 1774 E. 21st Street, Los Angeles, CA 90058
PRULITE.COM 213.746.0360
Snap™ (Satin Acrylic) | Linear, SurfaceLED
03-17-2017
4Architectural Wrap
Client | Monster
C2 Unlit 90° Corner
C3-120 Unlit 120° 3-Way Y Corner
C3 Unlit 90° 3-Way Corner
C2-120 Unlit 120˚
Corner
C4 90˚ 4-Way
Corner
CORNERS
4˝43/4˝
4˝
53/4˝
53/4˝
4˝
6˝
53/4˝
4˝
6˝
25/8˝ 120°
615/16˝
A B
Impact resistant LED ceiling and wall luminaires · unshielded
Housing: One piece die-cast aluminum for direct attachment to surface OVER a standard 4" octagonal wiring box. Die castings are marine grade, copper free (≤ 0.3% copper content) A360.0 aluminum alloy.Enclosure: Crystal glass with white matte finish retained by one piece die-cast aluminum frame. Frame is secured by a single set screw threaded into a stainless steel insert. Fully gasketed for weather tight operation using molded silicone rubber gasket.Electrical: 6W LED luminaire, 8.4 total system watts, -40°C start temperature. Integral 120V through 277V electronic LED driver, 0-10V dimming. LED module(s) are available from factory for easy replacement. Standard LED color temperature is 3000K with an 85 CRI. Available in 4000K (85 CRI); add suffix K4 to order. Note: LEDs supplied with luminaire. Due to the dynamic nature of LED technology, LED luminaire data on this sheet is subject to change at the discretion of BEGA-US. For the most current technical data, please refer to www.bega-us.com.Finish: All BEGA standard finishes are polyester powder coat with minimum 3 mil thickness. Available in four standard BEGA colors: Black (BLK); White (WHT); Bronze (BRZ); Silver (SLV). To specify, add appropriate suffix to catalog number. Custom colors supplied on special order.CSA certified to U.S. and Canadian standards for wet locations. Protection class IP65Weight: 2.2 lbs.
Luminaire Lumens: 247 Tested in accordance with LM-79-08
Lamp A B
33 534 6W LED 6 1/8 2 1/2
Type:BEGA Product:
Project:Voltage:
Color:Options:
Modified:
BEGA-US 1000 BEGA Way, Carpinteria, CA 93013 (805) 684-0533 FAX (805) 566-9474 www.bega-us .com ©copyright BEGA-US 2016 Updated 01/16
© 2016 Solid State Luminaires. p 877-SSL-GREEN . f 630-889-81063609 Swenson Ave., St. Charles, IL 60174. www.solidstateluminaires.com
Type: Approved:
Fixture:
Project:
CATALOG NUMBER
SPECIFICATION
RF Rev. 0517
COVELINE WET
color temperature 2700K 3000K 4000K Blue Amber
lumen output 762 per foot 790 per foot 905 per foot (35K also) 360 per foot 525 per foot
beam spread 10° - 25° - 40° - 80° - 120° - 10° x 40° - 30° x 60° - 67° x 140° (ASYM) - 21º x 56º (ASYM)
LEDs per foot 9
color consistency 3-step MacAdam Ellipse / CRI ≥ 84
lifetime > 70,000 hours / L70 or better
input voltage Universal 120–277V AC
power consumption 10.5W
dimensions [ L x W x H ] 12.25” x 1.77” x 1.9” 47” x 1.77” x 1.9” 70.25” x 1.77” x 1.9”
weight 1.3 lbs. per foot
housing extruded aluminum housing with tooled end caps
lens etched polycarbonate
mounting surface mounting with (+/– 15°), Adjustable Bracket (80° / 15° Bi-directional )
operating temperature -20°C to 40°C
junction temperature 73°C @ TA 25°C
interface dimmable to 3% (ELV) electronic low-voltage trailing edge, synchronized w/ soft shut-off
power supply integral Class II, electronic high-power factor 94%
certification ETL / cETL or CE
standards UL-Class I / IES LM-79 / LM-80
environment wet, exterior location / IP66 (Connectors IP68)
installation http://tinyurl.com/gv5tcjr
warranty 5 year limited warranty (refer to website for details)
Due to continuous development and improvements, specifications are subject to change without notice.
CVLWET
model length temperature optics options
CVLWET COVELINE WET 1 305 mm [ 12 in. ] 27K 2700K 10 10ºx10° beam 120 120ºx120° beam (standard) BEA6-G2 Bracket Extension Arm - 6"
4 1189 mm [ 46.8 in. ] 3K 3000K 25 25ºx 25° beam 1040 10º x 40º beam BEA12-G2 Bracket Extension Arm - 12"
6 1778 mm [ 70 in. ] 35K 3500K 40 40ºx 40º beam 3060 30º x 60º beam BEA18-G2 Bracket Extension Arm - 18"
4K 4000K 80 80ºx 80° beam 67140 67º x 140º Asymmetric BL Black Louvre
RED Red ** Asym 21º x 56º Asymmetric
GRN Green **
BLU Blue **
AMB Amber **
The COVELINE WET is a powerful and versatile interior / exterior cove luminaire.COVELINE WET comes in a 1 ft, 4 ft or 6 ft nominal lengths and 27K, 3K, 35K or 4K color temperatures, as well as, Red, Green, Blue and Amber. The housing is constructed of extruded aluminum with tooled end caps and is IP66 rated for interior & exterior use. Features IP68 line voltage Plug N’ Play connectors for easy installation. Power supply is integral, no remote driver required. Universal orientation fixture; up, down, horizontal or vertical positioning and 10 optical solutions. Flicker free dimmable to 3% full brightness with ELV trailing edge dimming.
** Consult Factory (minimum order quantity)
_______ TCAPW Terminator Cap
_______ EC12W 12 in. Extension Cord
_______ EC24W 24 in. Extension Cord
_______ EC60W 60 in. Extension Cord
_______ SC10W 10 ft. Starter Connection Cord
_______ ADBW2 Adjustable Bracket (Bi-directional )
_______ LS6 Landscape Spike - 6”
_______ LS12 Landscape Spike - 12”
_______ LS18 Landscape Spike - 18”
Accessories (Indicate the quantity needed for each item.) REQUIRED: Starter Cable (SC10W) and Terminator Cap (TCAPW) for every run. Maximum Run Length = 60 feet
© 2016 Solid State Luminaires. p 877-SSL-GREEN . f 630-889-81063609 swenson ave., st. charles, il 60174. www.solidstateluminaires.com
PHOTOMETRY
Connected Delivered LumensModel Wattage 2700K 3000K 4000K Blue AmberCVLWET-1 10.5 762 790 905 360 525
CVLWET-4 42 3048 3160 3620 1440 2100
CVLWET-6 63 4572 4740 5430 2106 3150
PERFORMANCE
CVLWET-1-120-4K-880-120° Zonal Lumen Summary Illuminance at a Distance
CVLWET-1-120-4K-906-10°x 40° Zonal Lumen Summary Illuminance at a Distance
JO Rev. 916
COLORS
RED GREEN BLUE AMBER
198 lm/ ft (5.5W) 430 lm/ ft (5.5W) 580 lm/ ft (5.5W) 235 lm/ ft (5.5W)
RESULTS OF TEST (cont’d)
Photometric and Electrical Measurements at Ambient Temperature Distribution
Filename: SSL-CVLWET-1-UNV-4K-120
Manufacturer: SSL Lighting
Lamp: LED
Lamp Output: Total luminaire Lumens: 881.8
Max Candela: 276.4 at Horizontal: 180°, Vertical: 5°
Input Wattage: 8.7
Luminous Opening: Rectangle (L: 11.81", W: 1.97")
Test: Type C Intensity
Test Date: 2/11/2016
Test Lab: FC/SSL Lab
Photometry : Type C
Cutoff Class: Semi-cutoff
Flood SummaryEfficiency Lumens Horizontal Spread Vertical Spread
Field (10%): 99.2% 874.9 n/a 212
Beam (50%): 61.5% 542.0 108.6 106.4
Total: 100.1% 882.2
Zonal Lumen Summary
Zone Lumens % Luminaire
0-30 211.3 24%
0-40 344.9 39.1%
0-60 604.4 68.5%
60-90 209.8 23.8%
70-100 157.4 17.9%
90-120 67.6 7.7%
0-90 814.2 92.3%
90-180 67.6 7.7%
0-180 881.8 100%
Coefficients Of Utilization - Zonal Cavity MethodEffective Floor Cavity Reflectance: 20%
RCC %: 80 70 50 30 10 0
RW %:
RCR: 0
1
2
3
4
5
6
7
8
9
10
70 50 30 0
1.17 1.17 1.17 1.17
1.05 1.00 .95 .91
.96 .87 .79 .73
.87 .76 .67 .61
.80 .67 .58 .51
.73 .60 .51 .44
.68 .54 .45 .38
.63 .49 .40 .34
.58 .45 .36 .30
.54 .41 .33 .27
.51 .38 .30 .25
70 50 30 0
1.14 1.14 1.14 .92
1.02 .97 .93 .75
.92 .84 .77 .62
.84 .74 .66 .53
.77 .65 .57 .45
.70 .58 .50 .39
.65 .53 .44 .35
.60 .48 .39 .31
.56 .44 .35 .28
.53 .40 .32 .25
.49 .37 .29 .23
50 30 20
1.07 1.07 1.07
.91 .88 .84
.79 .74 .69
.70 .63 .58
.62 .55 .49
.55 .48 .42
.50 .43 .37
.46 .38 .33
.42 .34 .29
.38 .31 .26
.35 .29 .24
50 30 20
1.01 1.01 1.01
.86 .83 .80
.75 .70 .66
.66 .60 .56
.59 .52 .47
.53 .46 .41
.48 .41 .36
.43 .37 .32
.40 .33 .29
.37 .30 .26
.34 .28 .23
50 30 20
.95 .95 .95
.81 .79 .77
.71 .67 .64
.62 .58 .54
.56 .50 .46
.50 .44 .40
.45 .40 .35
.41 .36 .31
.38 .32 .28
.35 .29 .25
.33 .27 .23
0
.92
.74
.61
.51
.44
.38
.33
.29
.26
.23
.21
Zone Lumens % Luminaire
0-30 211.3 24%0-40 344.9 39.1%0-60 604.4 68.5%60-90 209.8 23.8%70-100 157.4 17.9%90-120 67.6 7.7%0-90 814.2 92.3%90-180 67.6 7.7%0-180 881.8 100%
Efficiency Total: 99%
RESULTS OF TEST (cont’d)
Photometric and Electrical Measurements at Ambient Temperature Distribution
Filename: SSL-CVLWET-1-UNV-4K-10X40
Manufacturer: FC/SSL Lighting
Lamp: LED
Lamp Output: Total luminaire Lumens: 906.9
Max Candela: 2,699.9 at Horizontal: 0°, Vertical: 0°
Input Wattage: 8.1
Luminous Opening: Rectangle w/Luminous Sides (L: 39.37", W: 1.57", H:39.37")
Test: Type C Intensity
Test Lab: FC/SSL Lab
Photometry : Type C
Cutoff Class: Cutoff
Nema Type: 4 X 4
Flood Summary
Efficiency Lumens Horizontal Spread Vertical Spread
Field (10%): 68.9% 625.2 58.2 52.1
Beam (50%): 30.8% 279.2 27.8 22.3
Total: 100.5% 911.2
Zonal Lumen Summary
Zone Lumens % Luminaire
0-30 649.7 71.6%
0-40 741.1 81.7%
0-60 844.3 93.1%
60-90 59.6 6.6%
70-100 30.3 3.3%
90-120 3.0 0.3%
0-90 903.9 99.7%
90-180 3.0 0.3%
0-180 906.9 100%
Coefficients Of Utilization - Zonal Cavity MethodEffective Floor Cavity Reflectance: 20%
RCC %: 80 70 50 30 10 0
RW %:
RCR: 0
1
2
3
4
5
6
7
8
9
10
70 50 30 0
1.19 1.19 1.19 1.19
1.13 1.10 1.07 1.04
1.07 1.02 .97 .94
1.02 .95 .90 .85
.97 .89 .83 .79
.92 .84 .78 .74
.88 .79 .74 .69
.85 .76 .70 .66
.81 .72 .66 .62
.78 .69 .63 .60
.75 .66 .61 .57
70 50 30 0
1.16 1.16 1.16 1.00
1.10 1.07 1.05 .92
1.05 1.00 .96 .86
.99 .93 .89 .80
.95 .88 .83 .75
.91 .83 .78 .71
.87 .79 .73 .67
.83 .75 .69 .64
.80 .72 .66 .61
.77 .68 .63 .59
.74 .66 .61 .56
50 30 20
1.11 1.11 1.11
1.03 1.01 1.00
.97 .93 .91
.91 .87 .83
.86 .81 .78
.81 .76 .73
.77 .72 .69
.74 .69 .65
.70 .66 .62
.68 .63 .59
.65 .60 .57
50 30 20
1.06 1.06 1.06
1.00 .98 .96
.93 .91 .89
.88 .85 .82
.84 .80 .77
.79 .75 .72
.76 .71 .68
.72 .68 .65
.69 .65 .62
.67 .62 .59
.64 .60 .57
50 30 20
1.02 1.02 1.02
.96 .95 .94
.91 .89 .87
.86 .83 .81
.82 .78 .76
.78 .74 .71
.74 .71 .68
.71 .67 .64
.68 .64 .61
.66 .62 .59
.63 .59 .57
0
1.00
.92
.85
.79
.74
.70
.66
.63
.60
.58
.55
Zone Lumens % Luminaire
0-30 649.7 71.6%0-40 741.1 81.7%0-60 844.3 93.1%60-90 59.6 6.6%70-100 30.3 3.3%90-120 3.0 0.3%0-90 903.9 99.7%90-180 3.0 0.3%0-180 906.9 100%
Efficiency Total: 99%
© 2017 Solid State Luminaires. p 877-SSL-GREEN . f 630-889-81063609 swenson ave., st. charles, il 60174. www.solidstateluminaires.com
DIMENSIONS Available in 3 lengths
RF Rev. 0817
35.7 mm [ 1.4 in ]
305 mm [12 in ] / 1189 mm [46.8 in ] / 1778 mm [70 in ]
2.75 in
3in
Extends From Mounting Surface- Available in 6", 12" or 18" lengths- BEA comes with ADBW2 bracket- Comes standard in FC Silver
BRACKET EXTENSION ARM (BEA-G2)
60°
INSTALL 8X8-32 PEM NUTS AFTER WELDING
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 P20006 BIGGER PLATE MOUNTS TO THE WALL 1
2 T20006-60 1X1 SQ TUBE 1
3 P20010 ABD2 SS MOUNTING BRKT PLATE 1
4 #8 PEM NUTS 8-32 PEM NUTS 8
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
FILE NAME: BREW06.SLDDRW
Date: X.XX 0.032Approved by:
X.XXX 0.016 X° 1° Sheet 1 of 1
DESCRIPTION: WET COVE MOUNTING ARM 6 INCH LONG FOR SS BRACKET
Part Number: BREW06
X.X 0.064
Lighting Manufacturers3609 Swenson AveSaint Charles, IL 60174
FCDesigned by:HASAN HASAN
REV.A -
ECN#
CB
-
-
Date:4/14/17
4/14/17DATE
8-01-177-28-17
RELEASE FOR PRODUCTION
X/X 1/8
DESCRIPTION
60º WAS 45ºADDED ADDITIONAL BRACKET LOCATION
REVISION# CMaterial:
BY.HH
JAJA
X.X° 0.1°
Universal Orientation- Mounts to horizontal or vertical surfaces- Easy installation w/fixture in position- +/-45° to surface
66.92.63
52.1
2.05
68.22.68
A
B
10-32 SSNYLON-INSERTLOCKNUT
SS SPRING WAVE WASHER
0.19
3.43 2.
222.75
4.00 0.1
5
21.3R0.84
10-32 X 3" SOCKETHEAD SCREW - SS
SET SCREW
DETAIL ASCALE 1 : 1
WAVE SPRINGWASHER
SS FLAT WASHER
10-32 X 3" SOCKETHEAD SCREW - SS
BASE
DETAIL BSCALE 1 : 1
SS LOCKNUT
WAVE SPRINGWASHER
BASE
NOTES:1. No sharp edges or burrs allowed2. Parts to be adequately packed to prevent damage3. Compliance certi�cate to be supplied with each shipment
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
FILE NAME: ADBW2.SLDDRW
Date:2017
X.XX 0.032Approved by:HASAN HASAN
X.XXX 0.016 X° 1° Sheet 1 of 1
Part Number: ADBW2
X.X 0.064
Lighting Manufacturers3609 Swenson AveSaint Charles, IL 60174
FCDesigned by:HASAN HASAN
REV.A -
ECN#
CB
-
-
DATE
8-10-177-13-17
RELEASE FOR PRODUCTION
X/X 1/8
DESCRIPTION
ADDED NOTESDUAL DIM'S; ADDED DIM'S
REVISION# CMaterial:
BY.HH
JAJA
X.X° 0.1°
Date:4/13/2017
2017
DESCRIPTION: WET COVE MOUNTING BRACKET
ADJUSTABLE BRACKET (ADBW2)
6
-
:
-
-
-
-
. ..... ..
66.92.63
52.1
2.05
68.22.68
A
B
SS SPRING WAVE WASHER
0.19
3.43
2.222.
75
4.00 0.1
5
DETAIL ASCALE 1 : 1
WAVE SPRINGWASHER
SS FLAT WASHER
10-32 X 3" SOCKETHEAD SCREW - SS
BASE
DETAIL B
SS LOCKNUT
WAVE SPRINGWASHER
NOTES:1. No sharp edges or burrs allowed2. Parts to be adequately packed to prevent damage3. Compliance certi�cate to be supplied with each shipment
+/-45°
60°
INSTALL 8X8-32 PEM NUTS AFTER WELDING
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 P20006 BIGGER PLATE MOUNTS TO THE WALL 1
2 T20006-60 1X1 SQ TUBE 1
3 P20010 ABD2 SS MOUNTING BRKT PLATE 1
4 #8 PEM NUTS 8-32 PEM NUTS 8
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFFC LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF FC LIGHTING IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
FILE NAME: BREW06.SLDDRW
Date: X.XX 0.032Approved by:
X.XXX 0.016 X° 1° Sheet 1 of 1
DESCRIPTION: WET COVE MOUNTING ARM 6 INCH LONG FOR SS BRACKET
Part Number: BREW06
X.X 0.064
Lighting Manufacturers3609 Swenson AveSaint Charles, IL 60174FC
Designed by:HASAN HASAN
REV.A -
ECN#
CB
-
-
Date:4/14/17
4/14/17DATE
8-01-177-28-17
RELEASE FOR PRODUCTION
X/X 1/8
DESCRIPTION
60º WAS 45ºADDED ADDITIONAL BRACKET LOCATION
REVISION# CMaterial:
BY.HH
JAJA
X.X° 0.1°
75°
+.6" / -.6"
6" - 12" - 18"
Photometric performance is measured in accordance with IESNA LM-79. Visit focalpointlights.com for complete photometric data.
Focal Point LLC | 4141 S. Pulaski Rd, Chicago, IL 60632 | 773.247.9494 | focalpointlights.com | @focalpointlight
ID+ 3.5" x 3.5"LED DOWNLIGHT
DIMENSIONAL DATA FEATURES
PRODUCT OVERVIEW
PERFORMANCE 3.16"
80.3mm
12.88"327.2mm
.500"
2.64"67.1mm
50˚ cut-off reflector
60˚ cut-off reflector
.500"
4.62"117.3mm
3.50"88.9mm
4.62"117.3mm
3.50"88.9mm
2.64"67.1mm
12.88"327.2mm
Housing height with DALI, Lutron & LZ1 drivers is 3.0"
10.90"276.9mm
4.62"117.3mm
3.50"88.9m
m
April 2017 F
Lumen Output: 700-1500lm
Wattage: 8-17W
LPW: 85-92
SDCM: 2
Reported Lumen L90 @ Maintenance: 50,000hrs
Less than 2.64" low profile housing available.
ChromaSure: Color consistency resulting in a 2-step MacAdam ellipse across the entire ID+ product line.
Field adjustability of ceiling thickness from 0.5" - 1.5".
50˚ cut-off and 60˚ cut-off reflector options available.
Selection of dimming drivers available.
clear diffuse
titanium silver flange
black flange
die-cast black die-cast white
warm diffuse
trimless companion
Short 60˚ Cut-off, White Reflector, 4000K
Delivered Lumens: 1500lm
Total System Watts: 17W
Focal Point LLC reserves the right to change specifications for product improvement without notification.
fixture:
project:
HOUSING DETAILS
5 DAY*
HOUSING ORDERINGHousing Series FLC33DID+ 3.5" Square FLC33D
Trim Type SOSquare Overlap SOLumen Output
700 Lumen 700L900 Lumen 900L
1100 Lumen 1100L1300 Lumen 1300L1500 Lumen 1500L
Voltage120V 120277V 277
Driver 0-10V - 0% Dimming LZ1 0-10V - 1% Dimming L110-10V - 10% Dimming LD1
Forward Phase LFP(120V only. 900 & 1300 Lumens only.)
Lutron H-Series - 1% Dimming LH1(700 &1500 lumens not available.)
Lutron A-Series - 1% EcoSystem Digital L3D
(1500 Lumens not available. Consult factory for 3-wire control)
Lutron A-Series - Forward Phase LTE(120V only. 1500 lumens not available.)
Lutron 5-Series - 5% EcoSystem Digital LU5(1300 Lumens only)
DALI - 0% Dimming DZ1DALI - 1% Dimming D11
Housing TypeIC Rated / Airtight IC
(Available options: L11 & LD1: 700, 900 & 1100 Lumens. LFP: 900 & 1300 Lumens.)
Thermally Protected, Non-IC T(Housing height = 3.0" for LZ1,
L3D, LH1, LTE, LU5, D11 & DZ1)
Factory OptionsBar Hangers BH
Chicago Plenum CPEmergency Battery with
Remote test switch EMR(T-rated housing only. Not available with CP or AT.
Above Ceiling Access.)
TRIM & LED MODULEAperture LC33
3.5" Square Reflector LC33Trim Type
Square Overlap SOSquare Die-Cast Overlap SDO
(Die-cast trim available in Black/Black or White/White finishes only)
Lumen Output(Trim & housing output must match)
700 Lumen 700L900 Lumen 900L
1100 Lumen 1100L1300 Lumen 1300L1500 Lumen 1500L
Color Temperature2700K, 80+ CRI 27K2700K, 90+ CRI 927K
3000K, 80+ CRI 30K3000K, 90+ CRI 930K
3500K, 80+ CRI 35K3500K, 90+ CRI 935K
4000K, 80+ CRI 40K4000K, 90+ CRI 940K
OpticTall Cone with 50˚ cut-off DNT(Not available with Die-Cast trims.)
Short Cone with 60˚ cut-off DNSDistribution WFLWide Flood WFL
ColorClear Diffuse CDWarm Diffuse WD
Black BKWhite WH
Flange FinishBlack Painted BKWhite Painted WH
Titanium Silver TS
HOUSING SPECIFICATIONS
ConstructionThermally protected housing for new construction applications. Insulation to be kept 3" away from housing. Type IC inherently protected, suitable for direct contact with insulation. Restrictive airflow per ASTM-E283. Butterfly brackets allow mounting to ½ emt. Order bar hangers as an accessory. Die–cast aluminum heat sink designed for maximum thermal dis-sipation. Die-formed housing and integral junction box with (7) 1⁄2" pry outs. Accommodates ceiling thicknesses up to 0.5" standard, field adjustable up to 1.5" thickness. For thicker ceil-ing consult factory. Fixture will not exceed 5 lb.
ElectricalChoice of constant current dimming drivers. Power factor > .9 typical.
EmergencyEmergency Battery Pack: Bodine BSL17C–C2. Emergency output —7W for 90 minutes. Maximum mounting height: 20.7ft.
LabelsUL and cUL listed. Suitable for Dry, Damp or Wet Locations, indoor use only.
Lumen MaintenanceCalculated: L90 at 109,000 hours Reported: L90 at >50,000 hours Derived from EPA TM-21 calculator per 10,000 hours of LED test data.
WarrantyLED System rated for operation in ambient environments up to 25°C. 5-year limited warranty.
TRIM & LED SPECIFICATIONS
LED SystemProprietary array incorporates premium LEDs on a robust platform. May be specified in 2700K, 3000K, 3500K or 4000K, CRI>80 or >90. Color accuracy within 2 SDCM. Aluminum heat sink provides appropriate thermal management.
AestheticsDie–formed aluminum reflector ensures glare free optics. Reflector attaches to die-cast, seamless flange and may be removed for field painting. Full die-cast painted reflectors also available. Torsion springs pull trim tight to the ceiling with no visible fasteners within the trim.
Optics50-degree or 60-degree cut–off to light source and its image.
PERFORMANCE CHART—SHORT 60° CUT-OFF
60˚ - L x W x H12.88" x 10.90" x 2.64"DALI, Lutron & LZ1 height = 3.0"
50˚ - L x W x H12.88" x 10.90" x 3.16"
60˚ & 50˚ - L x W x H14.23" x 11.00" x 3.53"
T-Rated Housing IC/Chicago Plenum Housing
Delivered Lumens System Watts LPW
700 8 88
900 10 90
1100 12 92
1300 15 85
1500 17 87
*Based on Die-Cast Trimless, 3500K,80CRI, Wide Flood, White. See page 3 for lumen performance multipliers. Lumen output may vary +/- 5%. Actual wattage may vary +/- 5%.
*For more information visit focalpointlights.com/reference or consult factory.Quickship is a limited offering, visit focalpointlights.com/quickship for specifics.
LUMEN PERFORMANCE MULTIPLIER CHART - SQUARE DOWNLIGHT
Option Description Ordering Code Multiplier
Trim Type
Square Trimless ST 0.95
Square Overlap SO 0.90
Square Die-Cast Trimless SDT 1.01
Square Die-Cast Overlap SDO 0.97
Color Temperature
2700K, 80+ CRI 27K 0.93
2700K, 90+ CRI 927K 0.75
3000K, 80+ CRI 30K 1.00
3000K, 90+ CRI 930K 0.81
3500K, 80+ CRI 35K 1.00
3500K, 90+ CRI 935K 0.87
4000K, 80+ CRI 40K 1.00
4000K, 90+ CRI 940K 0.87
OpticTall Cone with 50˚ cut-off DNT 0.92
Short Cone with 60˚ cut-off DNS 1.00
Color
Clear Diffuse CD 1.00
Warm Diffuse WD 0.85
White Non-Die-Cast WH 1.13
White Die-Cast WH 1.00
Black BK 0.56
FLC33D-SO-900L-120-L11-T/LC33-SO-900L-27K-DNS-WFL-CDFilename: FLC33DSO900LSO27KDNSWFLCD.IES Lumens: 613lm
System Watts: 10W
LPW: 61
Go to www.focalpointlights.com for additional photometric data.
Vertical Angle
Horizontal Angle Zonal Lumens0° 22.5° 45° 67.5° 90°
0˚ 549 549 549 549 549
5˚ 550 551 551 551 551 53
15˚ 539 543 546 543 540 152
25˚ 419 444 473 446 420 201
35˚ 165 203 275 205 168 134
45˚ 53 58 78 59 54 51
55˚ 19 21 21 22 20 19
65˚ 2 2 4 1 1 3
75˚ 2 1 1 0 0 1
85˚ 0 0 0 0 0 0
90˚ 0 0 0 0 0 0
0 123
246
369
492
613
123
246
369
492
613
0° 10° 20° 30° 40°
0°45°
90°
90°45°
0°
90°
80°
70°
60°
50°
90°
80°
70°
60°
50°
10°20°30°40°
0 202
404
606
808
1010202
404
606
808
1010
0° 10° 20° 30° 40°
0°45°
90°
90°45°
0°
90°
80°
70°
60°
50°
90°
80°
70°
60°
50°
10°20°30°40°
Zone Lumens%
Fixture
0-30˚ 406 66.2
0-40˚ 539 88.0
0-60˚ 609 99.4
Total Luminaire
0-90˚ 613 100.0
0-180˚ 613 100.0
Floor 20Ceiling 80 70 50 30 10 00Wall 70 50 30 10 70 50 10 50 10 50 10 50 10 00RCR 0 119 119 119 119 116 116 116 111 111 106 106 102 102 100
1 113 110 108 105 111 108 104 104 101 100 98 97 95 93
2 107 102 98 94 105 100 93 97 91 94 89 91 87 86
3 101 95 89 85 99 93 85 91 83 88 82 86 81 79
4 96 88 82 78 94 87 77 85 76 83 75 81 75 73
5 91 82 76 71 89 81 71 79 70 77 70 76 69 67
6 86 76 70 66 84 76 65 74 65 73 65 71 64 63
7 81 72 65 61 80 71 61 70 60 68 60 67 60 58
8 77 67 61 56 76 66 56 65 56 64 56 63 56 54
9 73 63 57 53 72 63 53 62 52 61 52 60 52 51
10 70 59 53 49 69 59 49 58 49 57 49 57 49 47
Vertical Angle
Horizontal0° 45˚ 90˚
45˚ 9396 13873 9678
55˚ 4248 4655 4328
65˚ 512 1105 364
75˚ 748 286 198
85˚ 392 262 195
LUMINANCE DATA (CD/M2)
FLC33D-SO-1100L-120-L11-T/LC33-SO-1100L-35K-DNS-WFL-CDFilename: FLC33DSO1100LSO35KDNSWFLCD.IES Lumens: 1010lm
System Watts: 12W
LPW: 83
Go to www.focalpointlights.com for additional photometric data.
Vertical Angle
Horizontal Angle Zonal Lumens0° 22.5° 45° 67.5° 90°
0˚ 906 906 906 906 906
5˚ 907 909 909 909 909 87
15˚ 888 894 900 895 891 251
25˚ 690 731 780 735 692 331
35˚ 272 335 453 338 276 220
45˚ 87 96 128 98 89 84
55˚ 32 35 35 36 32 31
65˚ 3 3 6 2 2 5
75˚ 3 1 1 1 1 1
85˚ 0 0 0 0 0 0
90˚ 0 0 0 0 0 0
0 123
246
369
492
613
123
246
369
492
613
0° 10° 20° 30° 40°
0°45°
90°
90°45°
0°
90°
80°
70°
60°
50°
90°
80°
70°
60°
50°
10°20°30°40°
0 202
404
606
808
1010202
404
606
808
1010
0° 10° 20° 30° 40°
0°45°
90°
90°45°
0°
90°
80°
70°
60°
50°
90°
80°
70°
60°
50°
10°20°30°40°
Zone Lumens%
Fixture
0-30˚ 668 66.2
0-40˚ 889 88.0
0-60˚ 1004 99.4
Total Luminaire
0-90˚ 1010 100.0
0-180˚ 1010 100.0
Floor 20Ceiling 80 70 50 30 10 00Wall 70 50 30 10 70 50 10 50 10 50 10 50 10 00RCR 0 119 119 119 119 116 116 116 111 111 106 106 102 102 100
1 113 110 108 105 111 108 104 104 101 100 98 97 95 93
2 107 102 98 94 105 100 93 97 91 94 89 91 87 86
3 101 95 89 85 99 93 85 91 83 88 82 86 81 79
4 96 88 82 78 94 87 77 85 76 83 75 81 75 73
5 91 82 76 71 89 81 71 79 70 77 70 76 69 67
6 86 76 70 66 84 76 65 74 65 73 65 71 64 63
7 81 72 65 61 80 71 61 70 60 68 60 67 60 58
8 77 67 61 56 76 66 56 65 56 64 56 63 56 54
9 73 63 57 53 72 63 53 62 52 61 52 60 52 51
10 70 59 53 49 68 59 49 58 49 57 49 57 49 47
Vertical Angle
Horizontal0° 45˚ 90˚
45˚ 15489 22868 15953
55˚ 7003 7674 7134
65˚ 844 1821 600
75˚ 1233 471 326
85˚ 645 431 323
LUMINANCE DATA (CD/M2)
ID+ 3.5" x 3.5"LED DOWNLIGHT
CANDLEPOWER DISTRIBUTION LUMEN SUMMARY
CO-EFFICIENTS OF UTILIZATION
Num
bers
indi
cate
per
cent
age
valu
es o
f ref
lect
ivity
.N
umbe
rs in
dica
te p
erce
ntag
e va
lues
of r
efle
ctiv
ity.
Footcandle results based on AGI32; Reflectances=0/0/0; LLF=1
Footcandle results based on AGI32; Reflectances=0/0/0; LLF=1
Distance from
Source
Beam Diameter
FC
30°
FC
W
L
C
D
Distance from
Source
Beam Diameter
FC
30°
FC
W
L
C
D
0° aiming angle - horizontal surface
Distance from source
Beam Diameter
Center Beam (FC)
4' 4.7' 57
6' 7.1' 25
8' 9.4' 14
10' 11.8' 9
0° aiming angle - horizontal surface
Distance from source
Beam Diameter
Center Beam (FC)
4' 4.7' 34
6' 7.1' 15
8' 9.4' 9
10' 11.8' 5
ID+ 3.5" x 3.5"LED DOWNLIGHT
CANDLEPOWER DISTRIBUTION LUMEN SUMMARY
CO-EFFICIENTS OF UTILIZATION
FOOTCANDLE VALUES
FOOTCANDLE VALUES
Photometric performance is measured in accordance with IESNA LM-79. Visit focalpointlights.com for complete photometric data.
Focal Point LLC | 4141 S. Pulaski Rd, Chicago, IL 60632 | 773.247.9494 | focalpointlights.com | @focalpointlight
ID+ 3.5" x 3.5"LED DOWNLIGHT
DIMENSIONAL DATA FEATURES
PRODUCT OVERVIEW
PERFORMANCE 3.16"
80.3mm
12.88"327.2mm
.500"
2.64"67.1mm
50˚ cut-off reflector
60˚ cut-off reflector
.500"
4.62"117.3mm
3.50"88.9mm
4.62"117.3mm
3.50"88.9mm
2.64"67.1mm
12.88"327.2mm
Housing height with DALI, Lutron & LZ1 drivers is 3.0"
10.90"276.9mm
4.62"117.3mm
3.50"88.9m
m
April 2017 F
Lumen Output: 700-1500lm
Wattage: 8-17W
LPW: 85-92
SDCM: 2
Reported Lumen L90 @ Maintenance: 50,000hrs
Less than 2.64" low profile housing available.
ChromaSure: Color consistency resulting in a 2-step MacAdam ellipse across the entire ID+ product line.
Field adjustability of ceiling thickness from 0.5" - 1.5".
50˚ cut-off and 60˚ cut-off reflector options available.
Selection of dimming drivers available.
clear diffuse
titanium silver flange
black flange
die-cast black die-cast white
warm diffuse
trimless companion
Short 60˚ Cut-off, White Reflector, 4000K
Delivered Lumens: 1500lm
Total System Watts: 17W
Focal Point LLC reserves the right to change specifications for product improvement without notification.
fixture:
project:
HOUSING DETAILS
5 DAY*
HOUSING ORDERINGHousing Series FLC33DID+ 3.5" Square FLC33D
Trim Type SOSquare Overlap SOLumen Output
700 Lumen 700L900 Lumen 900L
1100 Lumen 1100L1300 Lumen 1300L1500 Lumen 1500L
Voltage120V 120277V 277
Driver 0-10V - 0% Dimming LZ1 0-10V - 1% Dimming L110-10V - 10% Dimming LD1
Forward Phase LFP(120V only. 900 & 1300 Lumens only.)
Lutron H-Series - 1% Dimming LH1(700 &1500 lumens not available.)
Lutron A-Series - 1% EcoSystem Digital L3D
(1500 Lumens not available. Consult factory for 3-wire control)
Lutron A-Series - Forward Phase LTE(120V only. 1500 lumens not available.)
Lutron 5-Series - 5% EcoSystem Digital LU5(1300 Lumens only)
DALI - 0% Dimming DZ1DALI - 1% Dimming D11
Housing TypeIC Rated / Airtight IC
(Available options: L11 & LD1: 700, 900 & 1100 Lumens. LFP: 900 & 1300 Lumens.)
Thermally Protected, Non-IC T(Housing height = 3.0" for LZ1,
L3D, LH1, LTE, LU5, D11 & DZ1)
Factory OptionsBar Hangers BH
Chicago Plenum CPEmergency Battery with
Remote test switch EMR(T-rated housing only. Not available with CP or AT.
Above Ceiling Access.)
TRIM & LED MODULEAperture LC33
3.5" Square Reflector LC33Trim Type
Square Overlap SOSquare Die-Cast Overlap SDO
(Die-cast trim available in Black/Black or White/White finishes only)
Lumen Output(Trim & housing output must match)
700 Lumen 700L900 Lumen 900L
1100 Lumen 1100L1300 Lumen 1300L1500 Lumen 1500L
Color Temperature2700K, 80+ CRI 27K2700K, 90+ CRI 927K
3000K, 80+ CRI 30K3000K, 90+ CRI 930K
3500K, 80+ CRI 35K3500K, 90+ CRI 935K
4000K, 80+ CRI 40K4000K, 90+ CRI 940K
OpticTall Cone with 50˚ cut-off DNT(Not available with Die-Cast trims.)
Short Cone with 60˚ cut-off DNSDistribution WFLWide Flood WFL
ColorClear Diffuse CDWarm Diffuse WD
Black BKWhite WH
Flange FinishBlack Painted BKWhite Painted WH
Titanium Silver TS
HOUSING SPECIFICATIONS
ConstructionThermally protected housing for new construction applications. Insulation to be kept 3" away from housing. Type IC inherently protected, suitable for direct contact with insulation. Restrictive airflow per ASTM-E283. Butterfly brackets allow mounting to ½ emt. Order bar hangers as an accessory. Die–cast aluminum heat sink designed for maximum thermal dis-sipation. Die-formed housing and integral junction box with (7) 1⁄2" pry outs. Accommodates ceiling thicknesses up to 0.5" standard, field adjustable up to 1.5" thickness. For thicker ceil-ing consult factory. Fixture will not exceed 5 lb.
ElectricalChoice of constant current dimming drivers. Power factor > .9 typical.
EmergencyEmergency Battery Pack: Bodine BSL17C–C2. Emergency output —7W for 90 minutes. Maximum mounting height: 20.7ft.
LabelsUL and cUL listed. Suitable for Dry, Damp or Wet Locations, indoor use only.
Lumen MaintenanceCalculated: L90 at 109,000 hours Reported: L90 at >50,000 hours Derived from EPA TM-21 calculator per 10,000 hours of LED test data.
WarrantyLED System rated for operation in ambient environments up to 25°C. 5-year limited warranty.
TRIM & LED SPECIFICATIONS
LED SystemProprietary array incorporates premium LEDs on a robust platform. May be specified in 2700K, 3000K, 3500K or 4000K, CRI>80 or >90. Color accuracy within 2 SDCM. Aluminum heat sink provides appropriate thermal management.
AestheticsDie–formed aluminum reflector ensures glare free optics. Reflector attaches to die-cast, seamless flange and may be removed for field painting. Full die-cast painted reflectors also available. Torsion springs pull trim tight to the ceiling with no visible fasteners within the trim.
Optics50-degree or 60-degree cut–off to light source and its image.
PERFORMANCE CHART—SHORT 60° CUT-OFF
60˚ - L x W x H12.88" x 10.90" x 2.64"DALI, Lutron & LZ1 height = 3.0"
50˚ - L x W x H12.88" x 10.90" x 3.16"
60˚ & 50˚ - L x W x H14.23" x 11.00" x 3.53"
T-Rated Housing IC/Chicago Plenum Housing
Delivered Lumens System Watts LPW
700 8 88
900 10 90
1100 12 92
1300 15 85
1500 17 87
*Based on Die-Cast Trimless, 3500K,80CRI, Wide Flood, White. See page 3 for lumen performance multipliers. Lumen output may vary +/- 5%. Actual wattage may vary +/- 5%.
*For more information visit focalpointlights.com/reference or consult factory.Quickship is a limited offering, visit focalpointlights.com/quickship for specifics.
LUMEN PERFORMANCE MULTIPLIER CHART - SQUARE DOWNLIGHT
Option Description Ordering Code Multiplier
Trim Type
Square Trimless ST 0.95
Square Overlap SO 0.90
Square Die-Cast Trimless SDT 1.01
Square Die-Cast Overlap SDO 0.97
Color Temperature
2700K, 80+ CRI 27K 0.93
2700K, 90+ CRI 927K 0.75
3000K, 80+ CRI 30K 1.00
3000K, 90+ CRI 930K 0.81
3500K, 80+ CRI 35K 1.00
3500K, 90+ CRI 935K 0.87
4000K, 80+ CRI 40K 1.00
4000K, 90+ CRI 940K 0.87
OpticTall Cone with 50˚ cut-off DNT 0.92
Short Cone with 60˚ cut-off DNS 1.00
Color
Clear Diffuse CD 1.00
Warm Diffuse WD 0.85
White Non-Die-Cast WH 1.13
White Die-Cast WH 1.00
Black BK 0.56
FLC33D-SO-900L-120-L11-T/LC33-SO-900L-27K-DNS-WFL-CDFilename: FLC33DSO900LSO27KDNSWFLCD.IES Lumens: 613lm
System Watts: 10W
LPW: 61
Go to www.focalpointlights.com for additional photometric data.
Vertical Angle
Horizontal Angle Zonal Lumens0° 22.5° 45° 67.5° 90°
0˚ 549 549 549 549 549
5˚ 550 551 551 551 551 53
15˚ 539 543 546 543 540 152
25˚ 419 444 473 446 420 201
35˚ 165 203 275 205 168 134
45˚ 53 58 78 59 54 51
55˚ 19 21 21 22 20 19
65˚ 2 2 4 1 1 3
75˚ 2 1 1 0 0 1
85˚ 0 0 0 0 0 0
90˚ 0 0 0 0 0 0
0 123
246
369
492
613
123
246
369
492
613
0° 10° 20° 30° 40°
0°45°
90°
90°45°
0°
90°
80°
70°
60°
50°
90°
80°
70°
60°
50°
10°20°30°40°
0 202
404
606
808
1010202
404
606
808
1010
0° 10° 20° 30° 40°
0°45°
90°
90°45°
0°
90°
80°
70°
60°
50°
90°
80°
70°
60°
50°
10°20°30°40°
Zone Lumens%
Fixture
0-30˚ 406 66.2
0-40˚ 539 88.0
0-60˚ 609 99.4
Total Luminaire
0-90˚ 613 100.0
0-180˚ 613 100.0
Floor 20Ceiling 80 70 50 30 10 00Wall 70 50 30 10 70 50 10 50 10 50 10 50 10 00RCR 0 119 119 119 119 116 116 116 111 111 106 106 102 102 100
1 113 110 108 105 111 108 104 104 101 100 98 97 95 93
2 107 102 98 94 105 100 93 97 91 94 89 91 87 86
3 101 95 89 85 99 93 85 91 83 88 82 86 81 79
4 96 88 82 78 94 87 77 85 76 83 75 81 75 73
5 91 82 76 71 89 81 71 79 70 77 70 76 69 67
6 86 76 70 66 84 76 65 74 65 73 65 71 64 63
7 81 72 65 61 80 71 61 70 60 68 60 67 60 58
8 77 67 61 56 76 66 56 65 56 64 56 63 56 54
9 73 63 57 53 72 63 53 62 52 61 52 60 52 51
10 70 59 53 49 69 59 49 58 49 57 49 57 49 47
Vertical Angle
Horizontal0° 45˚ 90˚
45˚ 9396 13873 9678
55˚ 4248 4655 4328
65˚ 512 1105 364
75˚ 748 286 198
85˚ 392 262 195
LUMINANCE DATA (CD/M2)
FLC33D-SO-1100L-120-L11-T/LC33-SO-1100L-35K-DNS-WFL-CDFilename: FLC33DSO1100LSO35KDNSWFLCD.IES Lumens: 1010lm
System Watts: 12W
LPW: 83
Go to www.focalpointlights.com for additional photometric data.
Vertical Angle
Horizontal Angle Zonal Lumens0° 22.5° 45° 67.5° 90°
0˚ 906 906 906 906 906
5˚ 907 909 909 909 909 87
15˚ 888 894 900 895 891 251
25˚ 690 731 780 735 692 331
35˚ 272 335 453 338 276 220
45˚ 87 96 128 98 89 84
55˚ 32 35 35 36 32 31
65˚ 3 3 6 2 2 5
75˚ 3 1 1 1 1 1
85˚ 0 0 0 0 0 0
90˚ 0 0 0 0 0 0
0 123
246
369
492
613
123
246
369
492
613
0° 10° 20° 30° 40°
0°45°
90°
90°45°
0°
90°
80°
70°
60°
50°
90°
80°
70°
60°
50°
10°20°30°40°
0 202
404
606
808
1010202
404
606
808
1010
0° 10° 20° 30° 40°
0°45°
90°
90°45°
0°
90°
80°
70°
60°
50°
90°
80°
70°
60°
50°
10°20°30°40°
Zone Lumens%
Fixture
0-30˚ 668 66.2
0-40˚ 889 88.0
0-60˚ 1004 99.4
Total Luminaire
0-90˚ 1010 100.0
0-180˚ 1010 100.0
Floor 20Ceiling 80 70 50 30 10 00Wall 70 50 30 10 70 50 10 50 10 50 10 50 10 00RCR 0 119 119 119 119 116 116 116 111 111 106 106 102 102 100
1 113 110 108 105 111 108 104 104 101 100 98 97 95 93
2 107 102 98 94 105 100 93 97 91 94 89 91 87 86
3 101 95 89 85 99 93 85 91 83 88 82 86 81 79
4 96 88 82 78 94 87 77 85 76 83 75 81 75 73
5 91 82 76 71 89 81 71 79 70 77 70 76 69 67
6 86 76 70 66 84 76 65 74 65 73 65 71 64 63
7 81 72 65 61 80 71 61 70 60 68 60 67 60 58
8 77 67 61 56 76 66 56 65 56 64 56 63 56 54
9 73 63 57 53 72 63 53 62 52 61 52 60 52 51
10 70 59 53 49 68 59 49 58 49 57 49 57 49 47
Vertical Angle
Horizontal0° 45˚ 90˚
45˚ 15489 22868 15953
55˚ 7003 7674 7134
65˚ 844 1821 600
75˚ 1233 471 326
85˚ 645 431 323
LUMINANCE DATA (CD/M2)
ID+ 3.5" x 3.5"LED DOWNLIGHT
CANDLEPOWER DISTRIBUTION LUMEN SUMMARY
CO-EFFICIENTS OF UTILIZATION
Num
bers
indi
cate
per
cent
age
valu
es o
f ref
lect
ivity
.N
umbe
rs in
dica
te p
erce
ntag
e va
lues
of r
efle
ctiv
ity.
Footcandle results based on AGI32; Reflectances=0/0/0; LLF=1
Footcandle results based on AGI32; Reflectances=0/0/0; LLF=1
Distance from
Source
Beam Diameter
FC
30°
FC
W
L
C
D
Distance from
Source
Beam Diameter
FC
30°
FC
W
L
C
D
0° aiming angle - horizontal surface
Distance from source
Beam Diameter
Center Beam (FC)
4' 4.7' 57
6' 7.1' 25
8' 9.4' 14
10' 11.8' 9
0° aiming angle - horizontal surface
Distance from source
Beam Diameter
Center Beam (FC)
4' 4.7' 34
6' 7.1' 15
8' 9.4' 9
10' 11.8' 5
ID+ 3.5" x 3.5"LED DOWNLIGHT
CANDLEPOWER DISTRIBUTION LUMEN SUMMARY
CO-EFFICIENTS OF UTILIZATION
FOOTCANDLE VALUES
FOOTCANDLE VALUES
Product Data Sheet
Landscape Forms, Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048
The Reeder Illuminated Bike Rack shines new light on the notion of wayfinding in outdoor
space. The bike rack is both a bicycle port and with optional lighting, a wayfinder in its
own right.
Wayfinding is a process for guiding, directing and signaling people through space in which
elements can take multiple forms and provide a variety of functions. Landscape Forms
wayfinding elements have in common the ability to delineate areas within a space and guide
people from point to point. They are differentiated by the specific services they render, from
providing graphic identity, to marking pathways and social spaces, to creating places to
park a bike.
REEDER ILLUMINATED BIKE RACK
General Description• Capacity: 2 bikes• Cast aluminum structure with steel base plate • Available with or without lighting• Surface mount or embedded• Bicycle graphic optional• Ships fully assembled• Meets APBP guidelines• Cover plate provides access
Electrical100V-277V 50/60 Hz, Class 2 LED driver and surge protection are standard, mounted within integrated cast aluminum base cabinet. Ships pre-wired and fully assembled.
FinishesPangard II®, offered exclusively by Landscape Forms, is a 19 step program of cleaning, priming, and powdercoating that resists rusting, chipping, peeling and fading to produce the finest metal finish available for site furniture and outdoor lighting. In addition, Pangard II® contains no heavy metals and is free of Hazardous Air Pollutants.
To Order• Specify Reeder Illuminated Bike Rack and powdercoat color for frame. • Specify optional graphic. • Specify color temperature for optional LED lighting.
WarrantyLED lighting products are warranted for six years.
OtherRoHS Compliant US Patent Pending
Reeder Bike Rack is designed by Rick Reeder, AIA, LEED AP
2 3/8"6 3/4"
8"
38"
3"
Illuminated Bike RackLamp: 2 Cree XP-E2 LEDs
CCT: 3000K, 3500K, 4000K
L70: >60,000 hrs
Drive Current: 350mA
Lens: Diffused Acrylite®
Power Supply: 100V-277V
LED Driver: GE Lightech BPWXL
BUG Rating: B0 U1 G0
Weight: 22 lbs
Visit our landscapeforms.com for more information. Specifications are subject to change without notice.
Landscape Forms supports the Landscape Architecture Foundation at the Second Century level.
©2016 Landscape Forms, Inc. Printed in U.S.A.
Grid spacing equals mounting height
2fc.5fc
.1fc
Max Intensity:54.0 cd
Vertical Plane175° Max
Horiz. Cone7.5° Max
13
27
40
54
LED Product Partner
RoHSCOMPLIANT
IMPORTANT NOTE: Standard choices are shown; colors are approximate. To make final color selections, please call for material samples. landscapeforms.com | [email protected]
Materials / Colors
Powdercoated MetalIn addition to colors shown below, a wide selection of optional and custom colors may be specified for an upcharge.
black cranberry ivyblue bell buttercup grass matte black ocean
bronze olive steel titanium mercurystonesilver
stormcloud white
Metallic
bumblebeeyellow
cosmicblue
parrotgreen
peeptoepink
flambe’orange
2013 Color Series*
*Colors available for an upcharge.
REEDER ILLUMINATED BIKE RACK
VIBIA, INC.272 Fernwood Ave. Edison, NJ 08837 USA. Phone 732 417 1700 Fax 732 417 [email protected] www.vibia.com
WINDDesign by Jordi Vilardell.
Reference
4055.
Application
Outdoor
Description
Design by Jordi Vilardell. Made in Spain by Vibia. WIND is quintessential contemporaryoutdoor lighting with joyful colors and evocative shades enhancing any setting. Technologyand tradition come together in a single design. The Wind collection offers unique, largeformat solutions that generate a cozy, pleasant light. The outdoor floor lamp is for ambientillumination. It has a concrete base and a fiberglass shade available in choice of color, withan acrylic inner diffuser. Electronic multi-volt ballast, 120-277. Equipped with cord and plug.IP64.
Diffuser
Acrylic diffuser
Materials
Shade: FiberglassWeight: ConcreteLid: SteelDiffuser: Acrylic
Finish
4055-03 White fiberglass (RAL 9016)
4055-04 Black fiberglass (RAL 9004)
4055-08 Orange fiberglass (RAL 2008)
Sketch
Electrical characteristics
1 x 2GX13 40W 120-277VTotal 40.0 W
Installation and assembly
Please see the installation manual
Light distribution
General lighting
Lamp for general lighting that equally distributes the light in all directions.
Photometric data
Efficiency : 30.72%
Coordinate system : CG
Total flux : 3200.00
Maximum value : 124.39
Light position : C=0.00 G=0.00
Symmetry on the planes : Double symmetrical
Isolux : Floor
Light position :
X=0.00m Y=0.00m Z=1.90m
Certificates
1.
4055
1 Shade's screws 4 un.
2 Allen key 2 un.
3 Lamp structure 1 un.
4 Shade 1 un.
2. 3. 4.
WindDesign by Jordi Vilardell
ASSEMBLY INSTRUCTIONS
SUPPLIED MATERIAL
Class I. Product with an additional protection cable (grounds).
Dust-tight product. Protected against water spray.
Product that CAN be in contact with normally-flammable materials
(wood or others).
-If you wish to fix the lamp to the ground, choose the most adequate plugs and screws depending on the surface.
-Before the installation, make sure the installation surface will not be damaged. If this happens, it will be the installator´s responsibility.
-If the steel cable or the power cord of this lamp is damaged, it must be replaced only by the manufacturer or their technical service or by a person capacitated to this effect to avoid
any risk.
Caution
Before assembling and installing this product, carefully read the following:
-Switch of the mains before installing the lamp.
-Always use the recommended bulb
TECHNICAL SPECIFICATIONS
1
2
3
4
st
13rd
2nd
A
B
C
D
A
st
1
3rd
2nd
A
B
C
D
E
F
NOTE: Please, follow these instructions just in case you need to fix the lamp to the ground. If you do not need it to be fixed to the ground, skip steps 1 through 3 and go directly to step 4. 1. Disassemble the base (A) as follows: Remove the two screws (B) using the supplied Allen wrench. Hold the lamp (C) firmly and move it toward the cable (as shown by the arrow) until it comes loose from the fixing plate (D). Pull upwards to completely release it from the base (A) Important: Do not do this if the lamp is leaning or lying on the ground. It must be vertical.
2. Fix the base (A) to the ground using the most adequate screws and plugs (not supplied).
3. Replace the lamp (C) following the instruction of step 1 backwards, making sure the lamp is firmly joined to the anchorage device (D), and fix it in place by tightening the screw (B) with supplied allen key.
4. After installing the fluorescent bulb, fix the shade (E) in place using its 4 screws (F) (supllied in a bag), using the supplied Allen wrench.
ASSEMBLY INSTRUCTIONS
Maintenance
-Use a slightly-wet cotton cloth for cleaning.
-In case of malfunction or damage, please contact the retailer who sold the lamp.
Ordering Codes
Job Name: Contact:
Fixture Type:Ordering Code:
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v.3.9.17 Page 1 of 4ZETA750
www.alphabetlighting.comAlphabet By Ledra Brands 15774 Gateway CircleTustin, CA 92780
PH: 714.259.9959FAX: 714.259.9969
Beam Face Type Wall Thickness
ZETA750
Housing
Description
Mounting
Electrical / Led Driver LED Performance
Listings
Extremely durable 316 stainless steel marine grade housing, with 3.5” (90mm) 20AWG wire leads. Choice of Thin Wall (recommended for ease of installation), or Heavy Wall. Curved face or flat face options available in three different beam patters 60°, 90° asymmetric, and 120°.
The ZETA750 Series Puck is the most flexible and vandal resistant LED handrail lighting module on the market, offering unrivalled uniformity and photometric performance. Designed with the specifier in mind, it accommodates a wide range of options of beam distribution for a clean design.
The pucks can be installed in new handrail or retrofitted into existing handrail, flat or oval metallic structures and surfaces. Powerful yet small and unobtrusive, makes the Handrail Puck ideal for incorporation into street sculptures, illuminating artwork or to wash walls with clean, white LED light.
The ZETA750 is engineered of electroplated 316 stainless steel. Other custom materials are available including aluminum, brass, and super-duplex stainless steel (which offers exceptional corrosion resistance), as well as custom painted finishes. Please consult factory for these custom options. At standard handrail height the pucks provide 11 foot-candles at the surface below. They are offered with wide, narrow, and asymmetric beam patterns. ETL wet rated for outdoor applications. For round handrail, the LED pucks are field installed with use of the ZETA750 series Drill Tool Kit. For flat surfaces, the installer may use their own drill bits and threading taps. Please refer to the installation instructions.
Type of Surface- Install in metallic surface only for proper thermal dissipation. Luminaire isfor use in non-insulated recessed surfaces.Fits Railing size - Ø38.0mm, 1.496in to 100.0mm, 3.937in.Thin Wall Puck minimum wall thickness - 1.5mm, 0.059in.Heavy Wall Puck minimum wall thickness - 2.5mm, 0.980in.Minimum distance between lights - 101.6mm, 4.000inches (center to center). Max 16 lightsmay be connected in series.
- 3VDC, 500mA, 1.5W (Remote Driver Required)
- ETLus Listed to UL2108 (suitable for wet locations)- cETL Listed to CSA C22.2 #250.0- Impact tested to IK10 (EN62262)- IP66 rated- ADA Compliant when using handrail diamete 31.75mm (1.25”) to 38.1mm (1.5”) O.D.
750 123
Standard 60ºSymmetric 120ºAssymetric 90º
Rail Puck 12
12
CurvedFlat
HeavyThin
Follow the steps to specify your fixture, example: 750 - 4 - 2 - 1 - 1
Part Number CCT
2345
2700k3000k4000k5000k
LED:DUV:CCT:CRI:Life:
Warranty:
Cree XPG.0012700k, 3000k, 4000k, 5000k>80*90% at 51k hrs based on LM-80 testing5 year limited warranty
*At 5000K CRI >70
Lumens CCT
104 lm111 lm119 lm127 lm
2700k3000k4000k5000k
- Mounts to pipe size: Ø38mm - Ø100mm- Wall thickness ≥ 2.5mm- Mounting thread: M16x1mm- Requires counterbore Ø16mm x 1.8mm
- Mounts to pipe size: Ø38mm - Ø100mm- Wall thickness ≥ 1.5mm- Mounting thread: M16x1mm
- Mounts to flat surfaces- Wall thickness ≥ 2.5mm- Mounting thread: M16x1mm- Requires counterbore Ø16mm x 1.8mm
- Mounts to flat surfaces- Wall thickness ≥ 1.5mm- Mounting thread: M16x1mm
Heavy Wall Curved Face Thin Wall Curved Face Heavy Wall Flat Face Thin Wall Flat Face
15mm
60º90º
120º
90º
105º 105º
75º
60º
45º
1000º1000º
600º
400º
45º
60º
75º
90º
800º
90º
105º 105º
75º
60º
45º
1000º1000º
600º
400º
45º
60º
75º
90º
800º
90º
105º 105º
75º
60º
45º
1000º1000º
600º
400º
45º
60º
75º
90º
800º
Job Name: Contact:
Fixture Type:Ordering Code:
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v.3.9.17 Page 2 of 4ZETA750
www.alphabetlighting.comAlphabet By Ledra Brands 15774 Gateway CircleTustin, CA 92780
PH: 714.259.9959FAX: 714.259.9969
Standard 60º Assymetric 90º Symmetric 120º
Job Name: Contact:
Fixture Type:Ordering Code:
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v.3.9.17 Page 3 of 4ZETA750
www.alphabetlighting.comAlphabet By Ledra Brands 15774 Gateway CircleTustin, CA 92780
PH: 714.259.9959FAX: 714.259.9969
60º
W S S S S
H
W S S S S
H
90º
W S S S S
H
W S S S S
H
W S S S S
H
W S S S S
H
60º STANDARD BEAM
lx = average lux u = uniformity color temp = 3000K
path width
STANDARD BEAM - LIGHT FROM ONE SIDE
LED Spacing0.5m1.0m2.0m
1.2m 2.0m 3.0m 4.0m
lx1075527
lx824121
lx613115
lx472412
u0.670.760.78
u0.510.580.59
u0.310.340.34
u0.190.210.21
lx = average lux u = uniformity color temp = 3000K
path width
STANDARD BEAM - LIGHT FROM BOTH SIDES
LED Spacing0.5m1.0m2.0m
1.2m 2.0m 3.0m 4.0m
lx21610955
lx1648341
lx1216131
lx954824
u0.760.820.84
u0.680.720.72
u0.660.720.71
u0.660.720.72
W = Path Width H = handrail height (900mm nominal) S = LED spacing
90º VERTICAL ASYMMETRIC
lx = average lux u = uniformity color temp = 3000K
path width
STANDARD BEAM - LIGHT FROM ONE SIDE
LED Spacing0.5m1.0m2.0m
1.2m 2.0m 3.0m 4.0m
lx954823
lx733718
lx522713
lx402010
u0.80.890.89
u0.450.510.51
u0.210.230.23
u0.150.160.16
lx = average lux u = uniformity color temp = 3000K
path width
STANDARD BEAM - LIGHT FROM BOTH SIDES
LED Spacing0.5m1.0m2.0m
1.2m 2.0m 3.0m 4.0m
lx1939748
lx1487437
lx1055327
lx814120
u0.890.90.84
u0.80.80.8
u0.770.860.84
u0.620.660.68
W = Path Width H = handrail height (900mm nominal) S = LED spacing
120º VERTICAL SYMMETRIC
lx = average lux u = uniformity color temp = 3000K
path width
STANDARD BEAM - LIGHT FROM ONE SIDE
LED Spacing0.5m1.0m2.0m
1.2m 2.0m 3.0m 4.0m
lx1477436
lx1135728
lx794019
lx582914
u0.70.710.22
u0.4
0.440.11
u0.120.120.03
u0.020.020.01
lx = average lux u = uniformity color temp = 3000K
path width
STANDARD BEAM - LIGHT FROM BOTH SIDES
LED Spacing0.5m1.0m2.0m
1.2m 2.0m 3.0m 4.0m
lx1959543
lx1035225
lx613215
lx462411
u0.870.880.25
u0.560.620.15
u0.120.110.05
u0.020.020.01
W = Path Width H = handrail height (900mm nominal) S = LED spacing
ZETA750 Tool Kit - For Round Handrail
Driver Matrix
Driver Quantity Power Spec
Flat Surfaces - No Toolkit Required
Job Name: Contact:
Fixture Type:Ordering Code:
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v.3.9.17 Page 4 of 4ZETA750
www.alphabetlighting.comAlphabet By Ledra Brands 15774 Gateway CircleTustin, CA 92780
PH: 714.259.9959FAX: 714.259.9969
The drilling jig consists of 3 parts, the clamp which consists of a pipe clamp arrangement; a level for setting the angle of the hole and a Female coupling; drilling piece which consists of a 15mm cutter and a 16mm cutter on the same shaft, a male coupling and an adjustable shaft for setting the rebate depth; tapping bit (M16x1mm tap) with a Male coupling.
26W LED Driver50W LED Driver w/ box50W LED Driver w/ box50W LED Driver w/ box50W LED Driver w/ box50W LED Driver w/ box
for 2-16 fixturesfor 1-15 fixtures per channel (1 channel driver)for 1-15 fixtures per channel (2 channel driver)for 1-15 fixtures per channel (1 channel driver)for 1-15 fixtures per channel (2 channel driver)for 1-10 fixtures per channel (3 channel driver)
120-277V, 26W, 500mA, Trailing Edge (ELV) dimming120-277V, 50W, 500mA, 0-10V (1%) dimming120-277V, 50W, 500mA, 0-10V (.1%) dimming120-277V, 50W, 500mA, DALI (1%) dimming120-277V, 50W, 500mA, DALI (.1%) dimming120-277V, 50W, 500mA, DMX/ ROM (0%) dimming
P70418-500P70414-500-ECO
P70414-500-SOLOP70469-500-ECO
P70469-500-SOLOP70470-500
Clamp Grip, Level and Female CouplingDrilling Shaft 15mm+16mm Tips on Adjustable Male CouplingTapping Shaft M16x1mm Tap on Male CouplingSpare Tap M16x1mmFile Half RoundSpare Milling Tip 15mmSpare Milling Tip 16mmTool 2mm Allen Key, Drill adapter, Cutting Tip Removal ToolTool Puck Fitting/Removal ToolFluid Cutting CompoundCrimping Pliers (not shown)
Note
Note
Purchase
Rental Procedures and Fees
- Tool kits are either purchased or loaned with a purchase order as a deposit.- A consumables fee is charged for loaned kits, consult factory for details.
1. All driver boxes are nema 1 rated for dry location only. wet rated nema enclosure to be provided by contractor as needed.
- It is strongly recommended to purchase a kit or multiple kits for larger projects or projects with several phases.- Additional drill bits jig assemblies can be purchased at nominal cost to replace worn or ineffective parts. CONSULT FACTORY.- Consult factory for tool kit purchase price.
- For thin wall pucks: Drill 15mm hole in mounting surface; then thread 15mm hole using M16x1mm tap.- For thick wall pucks: Drill 15mm hole in mounting surface; drill 16mm counterbore 1.8mm deep; then thread 15mm hole using M16x1mm tap.- Drill bits/taps provided by others.
- Tool Kits are rented for a period of 30 days from time of shipping.- Kits will need a separate PO for the cost to replace the kit as a DEPOSIT to be invoiced if not returned on time or in working order.- No invoice will be issued if Kit is returned within allotted time inspected for to ensure noting is missing and it is operable.- A non-refundable / non-negotiable RENTAL FEE for consumables and labor is charged for every order.- Consult factory for fees as they are subject to change.
123456789
1011
Ordering Codes
Job Name: Contact:
Fixture Type:Ordering Code:
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v.3.9.17 Page 1 of 4ZETA750
www.alphabetlighting.comAlphabet By Ledra Brands 15774 Gateway CircleTustin, CA 92780
PH: 714.259.9959FAX: 714.259.9969
Beam Face Type Wall Thickness
ZETA750
Housing
Description
Mounting
Electrical / Led Driver LED Performance
Listings
Extremely durable 316 stainless steel marine grade housing, with 3.5” (90mm) 20AWG wire leads. Choice of Thin Wall (recommended for ease of installation), or Heavy Wall. Curved face or flat face options available in three different beam patters 60°, 90° asymmetric, and 120°.
The ZETA750 Series Puck is the most flexible and vandal resistant LED handrail lighting module on the market, offering unrivalled uniformity and photometric performance. Designed with the specifier in mind, it accommodates a wide range of options of beam distribution for a clean design.
The pucks can be installed in new handrail or retrofitted into existing handrail, flat or oval metallic structures and surfaces. Powerful yet small and unobtrusive, makes the Handrail Puck ideal for incorporation into street sculptures, illuminating artwork or to wash walls with clean, white LED light.
The ZETA750 is engineered of electroplated 316 stainless steel. Other custom materials are available including aluminum, brass, and super-duplex stainless steel (which offers exceptional corrosion resistance), as well as custom painted finishes. Please consult factory for these custom options. At standard handrail height the pucks provide 11 foot-candles at the surface below. They are offered with wide, narrow, and asymmetric beam patterns. ETL wet rated for outdoor applications. For round handrail, the LED pucks are field installed with use of the ZETA750 series Drill Tool Kit. For flat surfaces, the installer may use their own drill bits and threading taps. Please refer to the installation instructions.
Type of Surface- Install in metallic surface only for proper thermal dissipation. Luminaire isfor use in non-insulated recessed surfaces.Fits Railing size - Ø38.0mm, 1.496in to 100.0mm, 3.937in.Thin Wall Puck minimum wall thickness - 1.5mm, 0.059in.Heavy Wall Puck minimum wall thickness - 2.5mm, 0.980in.Minimum distance between lights - 101.6mm, 4.000inches (center to center). Max 16 lightsmay be connected in series.
- 3VDC, 500mA, 1.5W (Remote Driver Required)
- ETLus Listed to UL2108 (suitable for wet locations)- cETL Listed to CSA C22.2 #250.0- Impact tested to IK10 (EN62262)- IP66 rated- ADA Compliant when using handrail diamete 31.75mm (1.25”) to 38.1mm (1.5”) O.D.
750 123
Standard 60ºSymmetric 120ºAssymetric 90º
Rail Puck 12
12
CurvedFlat
HeavyThin
Follow the steps to specify your fixture, example: 750 - 4 - 2 - 1 - 1
Part Number CCT
2345
2700k3000k4000k5000k
LED:DUV:CCT:CRI:Life:
Warranty:
Cree XPG.0012700k, 3000k, 4000k, 5000k>80*90% at 51k hrs based on LM-80 testing5 year limited warranty
*At 5000K CRI >70
Lumens CCT
104 lm111 lm119 lm127 lm
2700k3000k4000k5000k
- Mounts to pipe size: Ø38mm - Ø100mm- Wall thickness ≥ 2.5mm- Mounting thread: M16x1mm- Requires counterbore Ø16mm x 1.8mm
- Mounts to pipe size: Ø38mm - Ø100mm- Wall thickness ≥ 1.5mm- Mounting thread: M16x1mm
- Mounts to flat surfaces- Wall thickness ≥ 2.5mm- Mounting thread: M16x1mm- Requires counterbore Ø16mm x 1.8mm
- Mounts to flat surfaces- Wall thickness ≥ 1.5mm- Mounting thread: M16x1mm
Heavy Wall Curved Face Thin Wall Curved Face Heavy Wall Flat Face Thin Wall Flat Face
15mm
60º90º
120º
90º
105º 105º
75º
60º
45º
1000º1000º
600º
400º
45º
60º
75º
90º
800º
90º
105º 105º
75º
60º
45º
1000º1000º
600º
400º
45º
60º
75º
90º
800º
90º
105º 105º
75º
60º
45º
1000º1000º
600º
400º
45º
60º
75º
90º
800º
Job Name: Contact:
Fixture Type:Ordering Code:
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v.3.9.17 Page 2 of 4ZETA750
www.alphabetlighting.comAlphabet By Ledra Brands 15774 Gateway CircleTustin, CA 92780
PH: 714.259.9959FAX: 714.259.9969
Standard 60º Assymetric 90º Symmetric 120º
Job Name: Contact:
Fixture Type:Ordering Code:
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v.3.9.17 Page 3 of 4ZETA750
www.alphabetlighting.comAlphabet By Ledra Brands 15774 Gateway CircleTustin, CA 92780
PH: 714.259.9959FAX: 714.259.9969
60º
W S S S S
H
W S S S S
H
90º
W S S S S
H
W S S S S
H
W S S S S
H
W S S S S
H
60º STANDARD BEAM
lx = average lux u = uniformity color temp = 3000K
path width
STANDARD BEAM - LIGHT FROM ONE SIDE
LED Spacing0.5m1.0m2.0m
1.2m 2.0m 3.0m 4.0m
lx1075527
lx824121
lx613115
lx472412
u0.670.760.78
u0.510.580.59
u0.310.340.34
u0.190.210.21
lx = average lux u = uniformity color temp = 3000K
path width
STANDARD BEAM - LIGHT FROM BOTH SIDES
LED Spacing0.5m1.0m2.0m
1.2m 2.0m 3.0m 4.0m
lx21610955
lx1648341
lx1216131
lx954824
u0.760.820.84
u0.680.720.72
u0.660.720.71
u0.660.720.72
W = Path Width H = handrail height (900mm nominal) S = LED spacing
90º VERTICAL ASYMMETRIC
lx = average lux u = uniformity color temp = 3000K
path width
STANDARD BEAM - LIGHT FROM ONE SIDE
LED Spacing0.5m1.0m2.0m
1.2m 2.0m 3.0m 4.0m
lx954823
lx733718
lx522713
lx402010
u0.80.890.89
u0.450.510.51
u0.210.230.23
u0.150.160.16
lx = average lux u = uniformity color temp = 3000K
path width
STANDARD BEAM - LIGHT FROM BOTH SIDES
LED Spacing0.5m1.0m2.0m
1.2m 2.0m 3.0m 4.0m
lx1939748
lx1487437
lx1055327
lx814120
u0.890.90.84
u0.80.80.8
u0.770.860.84
u0.620.660.68
W = Path Width H = handrail height (900mm nominal) S = LED spacing
120º VERTICAL SYMMETRIC
lx = average lux u = uniformity color temp = 3000K
path width
STANDARD BEAM - LIGHT FROM ONE SIDE
LED Spacing0.5m1.0m2.0m
1.2m 2.0m 3.0m 4.0m
lx1477436
lx1135728
lx794019
lx582914
u0.70.710.22
u0.4
0.440.11
u0.120.120.03
u0.020.020.01
lx = average lux u = uniformity color temp = 3000K
path width
STANDARD BEAM - LIGHT FROM BOTH SIDES
LED Spacing0.5m1.0m2.0m
1.2m 2.0m 3.0m 4.0m
lx1959543
lx1035225
lx613215
lx462411
u0.870.880.25
u0.560.620.15
u0.120.110.05
u0.020.020.01
W = Path Width H = handrail height (900mm nominal) S = LED spacing
ZETA750 Tool Kit - For Round Handrail
Driver Matrix
Driver Quantity Power Spec
Flat Surfaces - No Toolkit Required
Job Name: Contact:
Fixture Type:Ordering Code:
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v.3.9.17 Page 4 of 4ZETA750
www.alphabetlighting.comAlphabet By Ledra Brands 15774 Gateway CircleTustin, CA 92780
PH: 714.259.9959FAX: 714.259.9969
The drilling jig consists of 3 parts, the clamp which consists of a pipe clamp arrangement; a level for setting the angle of the hole and a Female coupling; drilling piece which consists of a 15mm cutter and a 16mm cutter on the same shaft, a male coupling and an adjustable shaft for setting the rebate depth; tapping bit (M16x1mm tap) with a Male coupling.
26W LED Driver50W LED Driver w/ box50W LED Driver w/ box50W LED Driver w/ box50W LED Driver w/ box50W LED Driver w/ box
for 2-16 fixturesfor 1-15 fixtures per channel (1 channel driver)for 1-15 fixtures per channel (2 channel driver)for 1-15 fixtures per channel (1 channel driver)for 1-15 fixtures per channel (2 channel driver)for 1-10 fixtures per channel (3 channel driver)
120-277V, 26W, 500mA, Trailing Edge (ELV) dimming120-277V, 50W, 500mA, 0-10V (1%) dimming120-277V, 50W, 500mA, 0-10V (.1%) dimming120-277V, 50W, 500mA, DALI (1%) dimming120-277V, 50W, 500mA, DALI (.1%) dimming120-277V, 50W, 500mA, DMX/ ROM (0%) dimming
P70418-500P70414-500-ECO
P70414-500-SOLOP70469-500-ECO
P70469-500-SOLOP70470-500
Clamp Grip, Level and Female CouplingDrilling Shaft 15mm+16mm Tips on Adjustable Male CouplingTapping Shaft M16x1mm Tap on Male CouplingSpare Tap M16x1mmFile Half RoundSpare Milling Tip 15mmSpare Milling Tip 16mmTool 2mm Allen Key, Drill adapter, Cutting Tip Removal ToolTool Puck Fitting/Removal ToolFluid Cutting CompoundCrimping Pliers (not shown)
Note
Note
Purchase
Rental Procedures and Fees
- Tool kits are either purchased or loaned with a purchase order as a deposit.- A consumables fee is charged for loaned kits, consult factory for details.
1. All driver boxes are nema 1 rated for dry location only. wet rated nema enclosure to be provided by contractor as needed.
- It is strongly recommended to purchase a kit or multiple kits for larger projects or projects with several phases.- Additional drill bits jig assemblies can be purchased at nominal cost to replace worn or ineffective parts. CONSULT FACTORY.- Consult factory for tool kit purchase price.
- For thin wall pucks: Drill 15mm hole in mounting surface; then thread 15mm hole using M16x1mm tap.- For thick wall pucks: Drill 15mm hole in mounting surface; drill 16mm counterbore 1.8mm deep; then thread 15mm hole using M16x1mm tap.- Drill bits/taps provided by others.
- Tool Kits are rented for a period of 30 days from time of shipping.- Kits will need a separate PO for the cost to replace the kit as a DEPOSIT to be invoiced if not returned on time or in working order.- No invoice will be issued if Kit is returned within allotted time inspected for to ensure noting is missing and it is operable.- A non-refundable / non-negotiable RENTAL FEE for consumables and labor is charged for every order.- Consult factory for fees as they are subject to change.
123456789
1011
PH-SERIES (OUTDOOR)PERFORMANCE HIGH OUTPUTRUBBER COATEDLINEAR LED LIGHTING
Conforms to ANSI/UL Standard 2108Certified to CAN/CSA Standard C22.2 No. 250.0
Ques t i ons/Suppor t 800 -789 -3810 | quo tes@Vo l t L i gh t i ngGroup .com
l i g h t i n g g r o u pVOLT
ULLISTED
C USR
24O
PRODUCT FEATURES• 90+ CRI
• Dimmable
• 50,000 hour life
• 5-year warranty
• UL-listed for indoor and outdoor use
• 3M™ Industrial adhesive backing
• For use with electronic or magnetic power supplies
SPECIFICATIONS
070516EC
Fixture Type:
Project:
Location:
TOTAL WATTAGE USED AT EACH LENGTH
KELVIN COLOR TEMPERATURE SCALE
2,00
0K
2,40
0K
2,70
0K
5,00
0K
6,00
0K
3,00
0K
3,50
0K
4,10
0K
Series PH - Performance High Output (Outdoor)
Input Voltage 24V DC / Constant Voltage
Beam Spread 120°
Max Run Length Unlimited, power every 30ft
Cut Intervals 1-5/16in (33.3mm)
Dimensions (RC) 7/16in (11mm) x 1/8in (3mm)
Dimensions (TS) 1/2in (13mm) x 1/4in (7mm)
CRI 90+
Diode Epistar 2835
Dimming Options PWM, Triac, 0-10V, DMX, Hi-lume
Temp Range -40°F (-40°C) to 149°F (65°C)
MODEL: PH27K-RC-24V PH3K-RC-24V PH35K-RC-24V PH41K-RC-24V PH5K-RC-24V PH3K-TS-24V PH5K-TS-24V
Kelvin 2700K 3000K 3500K 4100K 5000K 3000K 5000KLumens 322 lm/ft 330 lm/ft 340 lm/ft 347 lm/ft 356 lm/ft 330 lm/ft 356 lm/ft
Rating IP65 IP65 IP65 IP65 IP65 IP67 IP67
1ft 2ft 3ft 4ft 5ft 6ft 7ft 8ft 9ft 10ft 11ft 12ft 13ft 14ft 15ft4.2 8.5 12.7 16.8 21 25.4 29.2 32.9 36.9 40.5 44.2 48 51.4 54.6 57.7
16ft 17ft 18ft 19ft 20ft 21ft 22ft 23ft 24ft 25ft 26ft 27ft 28ft 29ft 30ft60.7 64.3 67 70.4 71.8 75.2 77.7 80 83 85.1 86.6 88.7 91.2 93.7 94.6
Depth: 3mm
Cut Intervals: 33.3mm (1-5/16in)
Width: 11mm
151 DC24V
+++
___DC24VDC24V
++
__DC24VDC24V
++
__DC24VDC24V
151
151
151
151DC24V
++
__DC24V
151
151
151
151
(RC)
(RC)
CH-502-AEXTRUDED ALUMINUMMOUNTING CHANNEL
Fixture Type:
Project:
Location:
Ques t i ons/Suppor t 800 -789 -3810 | quo tes@vo l t l i gh t i ngg roup .com
CH-502-A
17.1mm (11/16”)
12.2mm (1/2”)
SPECIFICATIONS
Model
LengthExternal Width
Internal Width
Height 8mm (5/16”)
°
PRODUCT FEATURES
• Extruded aluminum construction
• Available in 1 or 2 meter sections
l i g h t i n g g r o u pVOLT
1 or 2 meters
ORDERING INFORMATION
Example: CH502A-2-CL-PL-ECMounting
PL PlasticMT MetalPV Pivot
End cap with holeEnd cap without hole
12.2 mm
17.1 mmPlastic mounting clips (PL)Metal mounting clips (MT)Pivot (metal) mounting clips (PV)
• Anodized matte finish
• Consult factory for custom lengths & finishes
End Cap
EC End Cap(included)
Length
1 meter2 meter
Series
CH-502-A
CH502A EC
8 m
m
ApplicationsClear lens (CL)Frost lens (FR)White lens (WH)
Lens
CL ClearFR FrostWH White
ULV9696 WATT - 24 VOLTCLASS 2 POWER SUPPLY
Fixture Type:
Project:
Location:
Ques t i ons/Suppor t 800 -789 -3810 | quo tes@vo l t l i gh t i ngg roup .com
l i g h t i n g g r o u pVOLT
RoHS O
PRODUCT FEATURES SPECIFICATIONSModel
Input Voltage Range 100~277VACOutput Voltage
Wattage
Power Factor
ULV96
96W
24VDC Constant Voltage
Dimensions 13-3/8”W x 1-3/4”H x 4-5/16”D
0.9
Working Temperature
IP Rating
-40°F ~ 158°F
Dimming TRIAC, PWM, 0-10V
IP65
Conforms to ANSI/UL Standard 8750Certified to CAN/CSA Standard C22.2 No. 250.0-08
• 5 Year Warranty
• TRIAC or 0-10V Dimming
• Free air convection cooling
• Protections: Short circuit / Over current / Over voltage
• Suitable for dry / wet location
• Class 2
24
1-3/4
”
2-15/16”8-7/8”13-3/8”
1-9/16”
4-5/
16”
l i g h t i n gg r o u p
VOLT
Class 2 Power Supply
ULV9624V/96W
www.VoltLightingGroup.com
INPUT
ACL (BRN)
ACN (BLU)
GROUND (YEL-GRN) INPUT: 100~120VAC/1.3A 50/60Hz (TRIAC DIMMING)
OUTPUT: 24VDC/(0~4)A 96WmaxCONSTANT VOLTAGE
Dry/Wet Locations IP65
ta: 122°Ftc: 194°FRoHS
OUTPUT
DIM+ (VLT)
DIM- (GRY)
DC+ (BRN)
DC- (BLU)100~277VAC/1.3A 50/60Hz (PWM/ 0-10V DIMMING)
ULLISTED
C USR
PH-SERIES (OUTDOOR)PERFORMANCE HIGH OUTPUTRUBBER COATEDLINEAR LED LIGHTING
Conforms to ANSI/UL Standard 2108Certified to CAN/CSA Standard C22.2 No. 250.0
Ques t i ons/Suppor t 800 -789 -3810 | quo tes@Vo l t L i gh t i ngGroup .com
l i g h t i n g g r o u pVOLT
ULLISTED
C USR
24O
PRODUCT FEATURES• 90+ CRI
• Dimmable
• 50,000 hour life
• 5-year warranty
• UL-listed for indoor and outdoor use
• 3M™ Industrial adhesive backing
• For use with electronic or magnetic power supplies
SPECIFICATIONS
070516EC
Fixture Type:
Project:
Location:
TOTAL WATTAGE USED AT EACH LENGTH
KELVIN COLOR TEMPERATURE SCALE
2,00
0K
2,40
0K
2,70
0K
5,00
0K
6,00
0K
3,00
0K
3,50
0K
4,10
0K
Series PH - Performance High Output (Outdoor)
Input Voltage 24V DC / Constant Voltage
Beam Spread 120°
Max Run Length Unlimited, power every 30ft
Cut Intervals 1-5/16in (33.3mm)
Dimensions (RC) 7/16in (11mm) x 1/8in (3mm)
Dimensions (TS) 1/2in (13mm) x 1/4in (7mm)
CRI 90+
Diode Epistar 2835
Dimming Options PWM, Triac, 0-10V, DMX, Hi-lume
Temp Range -40°F (-40°C) to 149°F (65°C)
MODEL: PH27K-RC-24V PH3K-RC-24V PH35K-RC-24V PH41K-RC-24V PH5K-RC-24V PH3K-TS-24V PH5K-TS-24V
Kelvin 2700K 3000K 3500K 4100K 5000K 3000K 5000KLumens 322 lm/ft 330 lm/ft 340 lm/ft 347 lm/ft 356 lm/ft 330 lm/ft 356 lm/ft
Rating IP65 IP65 IP65 IP65 IP65 IP67 IP67
1ft 2ft 3ft 4ft 5ft 6ft 7ft 8ft 9ft 10ft 11ft 12ft 13ft 14ft 15ft4.2 8.5 12.7 16.8 21 25.4 29.2 32.9 36.9 40.5 44.2 48 51.4 54.6 57.7
16ft 17ft 18ft 19ft 20ft 21ft 22ft 23ft 24ft 25ft 26ft 27ft 28ft 29ft 30ft60.7 64.3 67 70.4 71.8 75.2 77.7 80 83 85.1 86.6 88.7 91.2 93.7 94.6
Depth: 3mm
Cut Intervals: 33.3mm (1-5/16in)
Width: 11mm
151 DC24V
+++
___DC24VDC24V
++
__DC24VDC24V
++
__DC24VDC24V
151
151
151
151DC24V
++
__DC24V
151
151
151
151
(RC)
(RC)
CH-502-AEXTRUDED ALUMINUMMOUNTING CHANNEL
Fixture Type:
Project:
Location:
Ques t i ons/Suppor t 800 -789 -3810 | quo tes@vo l t l i gh t i ngg roup .com
CH-502-A
17.1mm (11/16”)
12.2mm (1/2”)
SPECIFICATIONS
Model
LengthExternal Width
Internal Width
Height 8mm (5/16”)
°
PRODUCT FEATURES
• Extruded aluminum construction
• Available in 1 or 2 meter sections
l i g h t i n g g r o u pVOLT
1 or 2 meters
ORDERING INFORMATION
Example: CH502A-2-CL-PL-ECMounting
PL PlasticMT MetalPV Pivot
End cap with holeEnd cap without hole
12.2 mm
17.1 mmPlastic mounting clips (PL)Metal mounting clips (MT)Pivot (metal) mounting clips (PV)
• Anodized matte finish
• Consult factory for custom lengths & finishes
End Cap
EC End Cap(included)
Length
1 meter2 meter
Series
CH-502-A
CH502A EC
8 m
m
ApplicationsClear lens (CL)Frost lens (FR)White lens (WH)
Lens
CL ClearFR FrostWH White
ULV9696 WATT - 24 VOLTCLASS 2 POWER SUPPLY
Fixture Type:
Project:
Location:
Ques t i ons/Suppor t 800 -789 -3810 | quo tes@vo l t l i gh t i ngg roup .com
l i g h t i n g g r o u pVOLT
RoHS O
PRODUCT FEATURES SPECIFICATIONSModel
Input Voltage Range 100~277VACOutput Voltage
Wattage
Power Factor
ULV96
96W
24VDC Constant Voltage
Dimensions 13-3/8”W x 1-3/4”H x 4-5/16”D
0.9
Working Temperature
IP Rating
-40°F ~ 158°F
Dimming TRIAC, PWM, 0-10V
IP65
Conforms to ANSI/UL Standard 8750Certified to CAN/CSA Standard C22.2 No. 250.0-08
• 5 Year Warranty
• TRIAC or 0-10V Dimming
• Free air convection cooling
• Protections: Short circuit / Over current / Over voltage
• Suitable for dry / wet location
• Class 2
24
1-3/4
”
2-15/16”8-7/8”13-3/8”
1-9/16”
4-5/
16”
l i g h t i n gg r o u p
VOLT
Class 2 Power Supply
ULV9624V/96W
www.VoltLightingGroup.com
INPUT
ACL (BRN)
ACN (BLU)
GROUND (YEL-GRN) INPUT: 100~120VAC/1.3A 50/60Hz (TRIAC DIMMING)
OUTPUT: 24VDC/(0~4)A 96WmaxCONSTANT VOLTAGE
Dry/Wet Locations IP65
ta: 122°Ftc: 194°FRoHS
OUTPUT
DIM+ (VLT)
DIM- (GRY)
DC+ (BRN)
DC- (BLU)100~277VAC/1.3A 50/60Hz (PWM/ 0-10V DIMMING)
ULLISTED
C USR
1/1
DATA SHEET HR-LINE LED extrusion – article number B3579
2501 27th Ave, Suite F-10, Vero Beach, FL 32960 / United States / Customer Service: [email protected] / (Ph.) 772 321 2260, 772 569 6655
Product characteristics The extrusion is made from high quality aluminum and is designed for flexible or rigid LED strips that are 8 - 11,5 mm wide. One of the accessories offered for the extrusion are covers that shade and protect LEDs inside the profile. Covers are made of polycarbonate and certified for excellent resistance to all weather conditions and UV radiation, as well as being flame retardant. It is recommended that the HR-ALU extrusion, together with LEDs, cover and caps, should be sealed with Dow Corning 799 neutral silicone to achieve IP67 standards. When used, we get a lighting fixture of high integrity, whose class of resistance against ingress of solid objects, dust and water is optimal. A frosted cover and densely spaced LEDs achieves a single line of light. The extrusion should be fastened to surfaces, such as different types of pavers, with a frost-resistant adhesive. It is recommended that the extrusion is mounted onto a foam base which cushions the loads carried by the profile and makes the extrusion even with paving stones. In addition, the foam can be used as a template for proper spacing during installation in e.g. cobblestones. The design of the extrusion and the parameters of the cover allow for static loads up to 20 kN.
Applications Due to its high integrity and high load bearing capacity, the extrusion is ideal for high-traffic areas such as sidewalks, bike paths; it is also suitable for mounting in parking lots, driveways. Additionally, it can be used to illuminate the exterior architectural elements, such as building facades, terraces, gardens, etc. Products related to the Extrusion cover frosted (1316)
base foam (1466)
end cap (mounted inside of the extrusion) without hole (1384) with hole (1445)
end cap (mounted outside of the extrusion) without hole (00301)
Technical specification
Ingress Protection Rating IP 67 (sealed version), IP 20 (unsealed extrusion)
Maximum static load up to 20 kN
Available lengths 1 m / 2 m (can be cut to any size)
Dimensions of base foam 1240 mm (length) / 30 mm (width) / 10-100 mm (height)
Material body – aluminum, cover – polycarbonate (PC), end cap – polypropylene (PP),
base foam – polystyrene (XPS)
2501 27th Ave, Suite F-10, Vero Beach, FL 32960 / United States / Customer Service: [email protected] / (Ph.) 772 321 2260, 772 569 6655
We reserve the right to change and modify our products.www.KlusDesign.com
Wire options:
36”-72” wire leads (20 gauge jacketed wire)
Flexible LED Strip 9.6 Watt / M, IP 65, 24 V
Productcode No.
Color Temp.
Watts/ MeterWatts/ Foot
LEDs/ MeterLEDs/ Foot
Lumens / MeterLumens/ Foot CRI LED Chip Type Beam Angle Input Voltage
WP-K-27-1220-24V 2700K9.6 W/M3 W/F
120 LEDs/M38 LEDs/F
635 L/M200 L/F
90+Epistar3528
140° 24V
WP-K-30-1220-24V 3000K9.6 W/M3 W/F
120 LEDs/M38 LEDs/F
750 L/M230 L/F
90+Epistar3528
140° 24V
WP-K-35-1220-24V 3500K9.6 W/M3 W/F
120 LEDs/M38 LEDs/F
800 L/M250 L/F
90+Epistar3528
140° 24V
WP-K-40-1220-24V 4000K9.6 W/M3 W/F
120 LEDs/M38 LEDs/F
845 L/M265 L/F
90+Epistar3528
140° 24V
Water and dust resistant – IP 65
Protects aganist:
• Rain and humidity• Water splash• Dust and dirt• Water jets• Particles
LED strip
silicon sleeve
male endfemale endSoldered leads
A.
D.
B. C.
No connector
0.33”(8,3 mm)
0.31
”(8
mm
)
Max run length 32’ (10M)
Cut every 2” (50 mm)
0.1”(2,5 mm)
OPERATING TEMPERATURE
LEADMERCURY
CONTENT RADIATION
UVIR
DIMMABLE INDOOR
24V DC
POWER OUT
-22°F to 122°F
IP
IP67OPERATING TEMPERATURE
LEADMERCURY
CONTENT RADIATION
UVIR
DIMMABLE OUTDOOR
24V DC
POWER OUT
-22°F to 122°F male endfemale endSoldered leads
A.
D.
B. C.
No connector
0.33”(8,3 mm)
0.39
”(1
0 m
m)
Max run length 32’ (10M)
Cut every 2” (50 mm)
0.1”(2,5 mm)
■ �������������������� �������� ��������������������� ��������������� �������� � ����� � ������������ � ����������������� ������ ���������������������� ������� ��!���������!� �����!��������"�!�������������#����# �������� �� ����� �����$ ������� !���!��# �$��#�� �#���� � ������$ ���� !��%!����������� ������������� �$ �� ��&�'%����!�(�)'%����!��������������# $�������*��������� ��#� � ������! �� !���#���(���+�!�������������,�-+�'!������������� ��#������� ��# �$��#�� ��!.��� ��������� ��! �� �����������# � ������ ���� /��#��� !��������!� � ������� ��������
�0�� ����%�������1�*�������� �,������(�)'%�/
�2���������� ��*���������
��������������� �������� �������
�2������(���+ !�������������
�����,�-+�'!������������������ ���� /
����������� �3��-+��4
�5�#� ��� ����������&�4�
����� ����3�6#����������1�7� �����!�1�7� �������� �
�������������������������1�7� ��� �� ����� �
����� ���� ����� ����*8Ⅱ
�����9���� �����
�6���$� �����!���1�!����1�� ���������
�:�����!���� �����������;��)�
�)�� ������������
■ ������ ■ �����������
60W PWM output LED power supply PWM -60 ser ies
File Name:PWM-60-SPEC 2014-11-26
IP67 � ��������
■ ������������
� ����� � ��
7������������
7������������
6 � ����
����!�����#�#� ��� ����������&�4���!�������������!���� ������������$ ������)� �����������������# � � ���������! ���!������# �� ��� � ������������#�����<# ����� �! ���,��#����*8�Ⅱ��/���!��# �!��$� ���������� ��# ��� �������$� �,6=<�/�����# ������! ���" ������� � ������� ������� >$��������������������� ������#������ ���<# � ������ �! ������&?'������� � ���!������������ ��<# ��� ��������������� !���#����� ��#��� �#��� ��# �# ���!��������!����������������� ���# ������$������! ���!�������)8@��������#�������������A��B�� � � � ��$�������������$ �� !�����#�#���!������!�#�#���#��!�#��#� ������ ����<# � ��� � � ������� ���
��! ���# �� �� ����� �$ �� ���?�-CB� ���!����������#��# �� � ��������$�����#������ ���� ���������℃
�����������#���
�A�!����������#���
�����! ������ ���#���
��������#� ���� ���#���
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
277V
230V
115V
78%
80%
82%
84%
86%
88%
90%
92%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
277V
230V
115V
I L L U M I N A T O R S 18
tel: 949.581.9398 | fax: 949.581.2947 | [email protected] | www.visual-lighting.com | 9 Rancho Circle, Lake Forest, CA 92630
P l e a s e r e f e r t o V L T L u x C a l c u l a t o r f o r a l l P h o t o m e t r i c s a n d B e a m A n g l e s
MOUNTING GUIDE
On Wall / Vertical
Horizontal
Cut Sheet #2061SILVER SERIES150 Watt Standard WetMetal Halide Illuminator
Control Features Available in White Light, Continuous Color and DMX* models.
Continuous Color Wheel Includes 1 rpm motor for twinkle wheel or 6-part standard colorwheel (Clear, Yellow, Red, Blue, Orange, Green).
DMX512 Single Wheel Fully rotating color or douser wheel with variable speed and direc-tion control; two (2) channel operation with individual control of wheel and lamp strike;optional master/slave function for synchronizing multiple units from one master unit; DMXconnection via screw terminals.
DMX512 Dual Wheel Fully rotating color and douser wheels with independent speed anddirection control; three (3) channel operation with individual control of color wheel, douserwheel and lamp strike; DMX connection via screw terminals.
6-position color wheel (Clear, Green, Orange, Blue, Red, Yellow) (custom available)6-position douser wheel (Blackout, 6%, 12%, 25%, 50%, Clear)
Lamp 150 watt Philips MasterColor CDM-SA/R metal halide with 6,000 hour lamp life (80%lumens maintained); 96 CRI, 4200° K color temperature; 3 minute re-strike delay.
Replacement Lamp Catalog #AC-LMP-150CDM-4K
Electrical Electronic ballast; 100-240v, 50/60Hz; 6’ attached power cord without connector; 1.5amps continuous load, 3.0 amps start-up load at 120 volts; auto-reset thermal protection.
Enclosure IP45 rating for outdoor operating environment; electro-galvanized steel housingwith grey powder coat finish; forced-air cooled; 28.5 dB(A) quiet fan; weight 8.4 kilograms(18.5lbs.; rugged outdoor design; lockable; vandal-resistant.
Fiber Capacity 1000 – 0.75mm; accepts stranded PMMA/glass or large core fiber.
Harness 28mm
Mounting and Ventilation Vertical, on wall; horizontal on raised concrete slab; mountingstand optional; in-ground mounting optional (contact VLT); 50 cfm minimum air volume; airintake and/or exhaust can be attached to 3" duct for routing of ventilation up to 13' away fromilluminator; 6" all sides recommended clearance; -30°C min/+40°C max (-22°F min/104°F max) operating temperature.
Listings UL, cUL Listed; CE marked.
IP45 Wet location
rating
Rugged, vandal-
resistant, lockable
enclosure
Zero light leak
Available mounting
bracket/planter stand
IP45
AIRFLOW GUIDE
I L L U M I N A T O R S 19
tel: 949.581.9398 | fax: 949.581.2947 | [email protected] | www.visual-lighting.com | 9 Rancho Circle, Lake Forest, CA 92630
P l e a s e r e f e r t o V L T L u x C a l c u l a t o r f o r a l l P h o t o m e t r i c s a n d B e a m A n g l e s
PC Permanent Color Filter (refer to pg. 51 for selection)CW/E Extended Palette Color Wheel (refer to pg. 53 for selection)CW/C Custom Color Wheel (specify any colors, may require long lead time;
use form on pg. 53 to specify custom choices)TW/B Twinkle Wheel with Bars (refer to pg. 56 for details)TW/SS Twinkle Wheel for Shooting Star (refer to pg. 56 for details)TW/CW Twinkle / Color Wheel (refer to pg. 53 for selection)TW/CD Twinkle / Color Wheel w/ Crushed Dichroics (refer to pg. 53 for selection)
MS3 3.6rpm Continuous Wheel MotorMS5 5.0rpm Continuous Wheel Motor2LCN Dual Line Cord for Continuous Wheel ControlMB Mounting Bracket / Planter Stand (refer to pg. 58 for details)VRC Vandal Resistant Cover to protect fiber (refer to pg. 58 for details)KL Keyed Lock for Illuminator Door (refer to pg. 59 for details)*For DMX controls and other system accessories, please refer to theAccessories section of this binder.
Modifiers & Accessories
–__________–__________–__________ /__________–__________–__________
Illuminator
Roblon Silver Series 150w
Color Temperature
4 4,200°K
Port Size
28 28mm(1,000-0.75mm fibers)
Enclosure
W Wet Location
Voltage
MVOLT Electronic 100-240v / 50-60Hz
Control Options
W WhiteN Continuous WheelD1 DMX Single WheelD2 DMX Dual Wheels
Wheel Options
W WhiteS Standard ColorsD Standard DouserS2 Standard Colors & Douser (D2 only)T Standard Twinkle
LGS150 4 28 W MVOLT
Clear PVC jacket
Indoor/outdoor use; water submersible
Algae/fungi resistant
UV-rated to ASTM G 53
Patented stranding technique provides
uniform light output
Four sizes available
MegoFlex SL PMMA Side Light Fiber
Fib
er:S
tra
nd
ed
PM
MA
& G
las
s
tel: 949.581.9398 | fax: 949.581.2947 | [email protected] | www.visual-lighting.com | 9 Rancho Circle, Lake Forest, CA 92630
73F I B E R : S T R A N D E D P M M A & G L A S S
PMMA Side Light FiberCut Sheet #3043
MegoFlex SL
# of Fibers: 49
Size of Fibers: 0.75mm
Outer Diameter: 8.0mm (0.315")
Bend Radius: 90mm (3.54")
Jacket Type: Clear PVC
Weight Per Foot: 13.71g (0.489 oz.)
Operating Temp.: to -70°C ( -40°F)
Description8mm MegoFlex SL (Roblon SR) PMMA side light fiber
with 8.0mm outer diameter and a clear, UV-stabilized
PVC jacket; includes 49 - 0.75mm fibers wound using
a patented process to provide uniform light output;
for indoor, outdoor and submersible use.
Max Tails 9mm: 2Max Tails 28mm: 20
Catalog No.
# of Fibers: 84
Size of Fibers: 0.75mm
Outer Diameter: 11.0mm (0.433")
Bend Radius: 120mm (4.72")
Jacket Type: Clear PVC
Weight Per Foot: 23.17g (0.817 oz.)
Operating Temp.: to -70°C ( -40°F)
Description11mm MegoFlex SL (Roblon SR) PMMA side light
fiber with 11.0mm outer diameter and a clear, UV-sta-
bilized PVC jacket; includes 84 - 0.75mm fibers
wound using a patented process to provide uniform
light output; for indoor, outdoor and submersible
use.
Max Tails 9mm: 1
Max Tails 28mm: 11
Catalog No.
# of Fibers: 12
Size of Fibers: 0.75mm
Outer Diameter: 4.5mm (0.177")
Bend Radius: 60mm (2.36")
Jacket Type: Clear PVC
Weight Per Foot: 4.57g (0.161 oz.)
Operating Temp.: to -70°C ( -40°F)
Description5mm MegoFlex SL (Roblon SR) PMMA side light fiber
with 4.5mm outer diameter and a clear, UV-stabilized
PVC jacket; includes 12 - 0.75mm fibers wound using
a patented process to provide uniform light output;
for indoor, outdoor and submersible use.
Max Tails 9mm: 11
Max Tails 28mm: 83
Catalog No. F-MF-SL-PM-5
F-MF-SL-PM-8
F-MF-SL-PM-11
# of Fibers: 144
Size of Fibers: 0.75mm
Outer Diameter: 14.0mm (0.551")
Bend Radius: 150mm (5.91")
Jacket Type: Clear PVC
Weight Per Foot: 42.98g (1.516 oz.)
Operating Temp.: to -70°C ( -40°F)
Description14mm MegoFlex SL (Roblon SR) PMMA side light
fiber with 14.0mm outer diameter and a clear, UV-sta-
bilized PVC jacket; includes 144 - 0.75mm fibers
wound using a patented process to provide uniform
light output; for indoor, outdoor and submersible
use.
Max Tails 9mm: 1
Max Tails 28mm: 6
Catalog No. F-MF-SL-PM-14
Fib
er:S
tra
nd
ed
PM
MA
& G
las
s
tel: 949.581.9398 | fax: 949.581.2947 | [email protected] | www.visual-lighting.com | 9 Rancho Circle, Lake Forest, CA 92630
74
MEGOFLEX SL APPLICATION NOTES
1. The recommended maximum length for a side light applica-
tion is dependent on illuminator type and configuration. Dou-
ble-ended and looped configurations (refer to Figure 1) can
have much longer fiber lengths than single-ended configura-
tions (refer to Figure 2.)
2. Multiple double-ended lengths of fiber can be "daisy-chained"
together to create longer effects. (Refer to Figure 3.) In a daisy-
chain configuration, illuminators should be spaced evenly
along the total length to ensure uniform light output across
the entire line.
3. When calculating fiber lengths, allow for an extra two foot
service loop of cable per illuminated end of fiber. This service
loop will allow for slight changes in illuminator location or ori-
entation, and also allows the cable to be re-harnessed in the
future, if required.
4. Straight, uninterrupted fiber runs are best for optimum light
output. The minimum bending radius for each fiber is shown
in the individual product details, but larger bends are recom-
mended if the application permits.
5. Side light fiber is most effective in environments with low am-
bient light levels.
6. For straight line designs, the use of side-by-side mounting
track is strongly advised. P-clips are not recommended for
straight lines as natural curves and waviness will result with-
out the rigidity provided by the track.
7. When planning your application, include enough illuminators
to accommodate all desired fiber tails. To increase the total
light output, use no more than 50% of the "Max Tails" capacity
listed in the individual product details.
8. Fiber exiting the illuminator must remain straight for a mini-
mum of 12" to avoid significantly reduced light transmission.
(Refer to Figure 4.)
9. Fiber optic cable is not plenum rated. Please consult local
codes to determine installation requirements, which may in-
clude routing of all fibers through metal conduit.
10. When using conduit to route fiber runs between the illumina-
tor and visible application, conduit must be large enough to
allow the fiber (and end seal, where applicable) to move
freely. Electrical sweeps or bends of 8" – 12" minimum radius
must be used at all turns. No hard 90° angles may be used.
NOTES:
Cut Sheet #3043PMMA Side Light Fiber
MegoFlex SL
Fib
er:S
tra
nd
ed
PM
MA
& G
las
s
tel: 949.581.9398 | fax: 949.581.2947 | [email protected] | www.visual-lighting.com | 9 Rancho Circle, Lake Forest, CA 92630
75F I B E R : S T R A N D E D P M M A & G L A S S
Cut Sheet #3043 PMMA Side Light Fiber
MegoFlex SL
Fib
er:S
tra
nd
ed
PM
MA
& G
las
s
Marine grade 316 stainless steel
Fully submersible to 30 feet
Fixed flood or spot lenses
Rough-in kit for poured concrete
Full photometrics using VLT Lux Calculator
Underwater rated for pools and fountains
Atlantis Series
Underwater Fixtures
for Pools and Fountains
Ex
te
rio
rF
ix
tu
re
s
tel: 949.581.9398 | fax: 949.581.2947 | [email protected] | www.visual-lighting.com | 9 Rancho Circle, Lake Forest, CA 92630
195
P l e a s e r e f e r t o V LT L u x C a l c u l a t o r f o r a l l P h o t o m e t r i c s a n d B e a m A n g l e s
35mm Underwater FixturesCut Sheet #7023
Atlantis Series
E X T E R I O R F I X T U R E S
Fiber Type: PMMA or Glass
Fiber Sizes: 2.0mm, 3.0mm, 4.5mm, 6.0mm
Ferrule Type: Indoor Ferrule
Fixture Size: 35mm
Lens Type: 12mm Domed Glass Lens
Focus: Fixed
Beam Angle: 10° - 36° (7° - 27° in water)
Mounting: Semi-Recessed, Conduit or Plate
Primary Material: Stainless Steel
IP Rating: IP68 to 10m Depth
DescriptionAtlantis Series (Roblon Aquarius 35 Medium) fixed-
focus underwater fixture with 12mm domed glass
lens and 35mm outer diameter; 10° - 36° beam angle
(fiber size dependent); underwater rated (IP68 to 10m
depth); accepts PMMA or glass fiber up to 6.0mm;
mounts into conduit or onto metal plate (nut pro-
vided); electro-polish finish.
Finishes AvailableStainless Steel - Marine Grade 316
AT-ID-FX-35-12-SS Catalog No.
Fiber Type: PMMA or Glass
Fiber Sizes: 2.0mm, 3.0mm, 4.5mm, 6.0mm
Ferrule Type: Outdoor Ferrule
Fixture Size: 35mm
Lens Type: Plain Flat Glass Lens
Focus: Fixed
Beam Angle: 54° (38° in water)
Mounting: Semi-Recessed, Conduit or Plate
Primary Material: Stainless Steel
IP Rating: IP68 to 10m Depth
DescriptionAtlantis Series (Roblon Aquarius 35 Wide) fixed-focus
underwater fixture with plain flat glass lens and
35mm outer diameter; 54° beam angle; underwater
rated (IP68 to 10m depth); accepts PMMA or glass
fiber up to 6.0mm; mounts into conduit or onto metal
plate (nut provided); electro-polish finish.
Finishes AvailableStainless Steel - Marine Grade 316
AT-OD-FX-35-PG-SS Catalog No.
Accessory: Mounting Kit
Fixture Size: 35mm
Dimensions: ø33mm x 65mm [ø 1.30 x 2.56]
Conduit Size: 1/2"
DescriptionAtlantis Series rough-in kit for poured concrete instal-
lations; for use with 35mm fixture; connects to 1/2"
Schedule 40 conduit.
Catalog No. AT-AC-MK-35
Accessory: Tool Kit
Fixture Size: 35mmDescriptionAtlantis Series tool kit for installation of fixture; for
use with 35mm fixture.
Catalog No. AT-AC-TK-35
Ex
te
rio
rF
ix
tu
re
s
tel: 949.581.9398 | fax: 949.581.2947 | [email protected] | www.visual-lighting.com | 9 Rancho Circle, Lake Forest, CA 92630
196
P l e a s e r e f e r t o V LT L u x C a l c u l a t o r f o r a l l P h o t o m e t r i c s a n d B e a m A n g l e s
70mm Underwater Fixtures Cut Sheet #7023
Atlantis Series
E X T E R I O R F I X T U R E S
Fiber Type: PMMA or Glass
Fiber Sizes: 3.0mm, 4.5mm, 6.0mm, 8.0mm, 9.0mm, 10.0mm
Ferrule Type: Indoor Ferrule
Fixture Size: 70mm
Lens Type: 26mm Domed Glass Lens
Focus: Fixed
Beam Angle: 7° - 33° (5° - 24° in water)
Mounting: Semi-Recessed, Conduit or Plate
Primary Material: Stainless Steel
IP Rating: IP68 to 10m Depth
DescriptionAtlantis Series (Roblon Aquarius 70 Focus) fixed-
focus underwater fixture with 26mm domed glass
lens and 70mm outer diameter; 7° - 33° beam angle
(fiber size dependent); under-water rated (IP68 to 10m
depth); accepts PMMA or glass fiber up to 10.0mm;
mounts into conduit or onto metal plate (nut pro-
vided); electro-polish finish.
Finishes AvailableStainless Steel - Marine Grade 316
AT-ID-FX-70-26-SS Catalog No.
Fiber Type: PMMA or Glass
Fiber Sizes: 3.0mm, 4.5mm, 6.0mm, 8.0mm, 9.0mm, 10.0mm
Ferrule Type: Outdoor or Max Ferrule
Fixture Size: 70mm
Lens Type: Plain Flat Glass Lens
Focus: Fixed
Beam Angle: 54° (38° in water)
Mounting: Semi-Recessed, Conduit or Plate
Primary Material: Stainless Steel
IP Rating: IP68 to 10m Depth
DescriptionAtlantis Series (Roblon Aquarius 70 Wide) fixed-focus
underwater fixture with plain flat glass lens and
70mm outer diameter; 54º beam angle; underwater
rated (IP68 to 10m depth); accepts PMMA or glass
fiber up to 10.0mm; mounts into conduit or onto
metal plate (nut provided); electro-polish finish.
Finishes AvailableStainless Steel - Marine Grade 316
AT-OD/MX-FX-70-PG-SS Catalog No.
Accessory: Mounting Kit
Fixture Size: 70mm
Dimensions: ø 68mm x 70mm [ø2.68 x 2.76]
Conduit Size: 1" or 1.5"
DescriptionAtlantis Series rough-in kit for poured concrete instal-
lations; for use with 70mm fixture; connects to 1"
or 1.5" Schedule 40 conduit.
Catalog No. AT-AC-MK-70
Accessory: Tool Kit
Fixture Size: 70mmDescriptionAtlantis Series tool kit for installation of fixture; for
use with 70mm fixture.
Catalog No. AT-AC-TK-70
Ex
te
rio
rF
ix
tu
re
s
A P P L I C A T I O N238
tel: 949.581.9398 | fax: 949.581.2947 | [email protected] | www.visual-lighting.com | 9 Rancho Circle, Lake Forest, CA 92630
Cut Sheet #7093Pool Lighting
TYPICAL APPLICATION
MATERIALS
UNDERWATER FIXTURES:
Illuminator:
LGS150 Wet Location
Fiber:
F-MF-EL-PM-8
Fixtures:
AT-OD/MX-FX-70-PG-SS
PERIMETER LIGHTING:Illuminator:
LGS150 Wet Location
Fiber:
F-MF-SL-PM-14
DESIGN CONSIDERATIONS1. Pool lighting can incorporate one or both of the methods
shown here. Underwater lighting provides a more traditionaleffect with the added benefit of color changing capabilities andzero underwater maintenance. Perimeter lighting adds a dramatic flare and the safety of a lit border.
2. Due to the narrower beam spread, more underwater fixtureswill be required than with traditional pool lighting. Atlantis fixtures should be mounted on approx. 6' centers along one ofthe long walls of the pool. To avoid glare, mount fixtures onlyon the pool wall hidden from the house or main viewpoint.
3. Spas will require between 2 and 5 Atlantis fixtures, dependingon size. Fixtures should be spaced evenly around the spa. Spascan typically use smaller fiber than pools.
4. Up to 13 Atlantis fixtures can be lit from one illuminator whenusing 8mm fiber. 6mm fiber can be used in lower ambientlighting environments. 10mm fiber may be necessary for larger pools or higher light output requirements.
5. To ensure that all Atlantis fixtures will have balanced light out-put, use a 3:2 ratio when determining fiber lengths (longest runis no more than 50% longer than the shortest run.)
6. Perimeter fiber can be mounted exposed to view directly be-neath the pool coping, or concealed from view within a notchin the coping. Both mounting locations will produce a reflectionof the fiber on the water surface.
7. Side Light fiber for perimeter lighting must be looped into the same illuminator, or for longer perimeter lengths, daisy-chained between two or more illuminators.
8. When calculating fiber lengths, allow for an extra two footservice loop of cable per fiber run. This service loop will allowfor slight changes in illuminator location or orientation, andalso allows the cable to be re-harnessed in the future, if required.
9. Color changing effects will require the use of DMX control insystems utilizing more than one illuminator.
INSTALLATION CONSIDERATIONS1. Atlantis fixtures should be mounted approximately 12" to 18"
below the water line for pools. Fixtures should be mountedhigh on the bench face for spas.
2. Fixture installation must follow factory recommendations toachieve appropriate water resistance and to adhere to stated IPrating.
3. Perimeter fiber should enter and exit the pool in corners toavoid bright spots. Corners must allow for a 6" minimum bendradius to avoid additional bright spots.
4. Side light fiber should be mounted using tracking, which canbe secured to the surface using either stainless steel screwsor an epoxy adhesive.
5. 1" flexible conduit should be used to transition perimeter fiberthrough elevation changes.
A P P L I C A T I O N239
tel: 949.581.9398 | fax: 949.581.2947 | [email protected] | www.visual-lighting.com | 9 Rancho Circle, Lake Forest, CA 92630
Section Detail 1.
Section Detail 2.
I L L U M I N A T O R S 18
tel: 949.581.9398 | fax: 949.581.2947 | [email protected] | www.visual-lighting.com | 9 Rancho Circle, Lake Forest, CA 92630
P l e a s e r e f e r t o V L T L u x C a l c u l a t o r f o r a l l P h o t o m e t r i c s a n d B e a m A n g l e s
MOUNTING GUIDE
On Wall / Vertical
Horizontal
Cut Sheet #2061SILVER SERIES150 Watt Standard WetMetal Halide Illuminator
Control Features Available in White Light, Continuous Color and DMX* models.
Continuous Color Wheel Includes 1 rpm motor for twinkle wheel or 6-part standard colorwheel (Clear, Yellow, Red, Blue, Orange, Green).
DMX512 Single Wheel Fully rotating color or douser wheel with variable speed and direc-tion control; two (2) channel operation with individual control of wheel and lamp strike;optional master/slave function for synchronizing multiple units from one master unit; DMXconnection via screw terminals.
DMX512 Dual Wheel Fully rotating color and douser wheels with independent speed anddirection control; three (3) channel operation with individual control of color wheel, douserwheel and lamp strike; DMX connection via screw terminals.
6-position color wheel (Clear, Green, Orange, Blue, Red, Yellow) (custom available)6-position douser wheel (Blackout, 6%, 12%, 25%, 50%, Clear)
Lamp 150 watt Philips MasterColor CDM-SA/R metal halide with 6,000 hour lamp life (80%lumens maintained); 96 CRI, 4200° K color temperature; 3 minute re-strike delay.
Replacement Lamp Catalog #AC-LMP-150CDM-4K
Electrical Electronic ballast; 100-240v, 50/60Hz; 6’ attached power cord without connector; 1.5amps continuous load, 3.0 amps start-up load at 120 volts; auto-reset thermal protection.
Enclosure IP45 rating for outdoor operating environment; electro-galvanized steel housingwith grey powder coat finish; forced-air cooled; 28.5 dB(A) quiet fan; weight 8.4 kilograms(18.5lbs.; rugged outdoor design; lockable; vandal-resistant.
Fiber Capacity 1000 – 0.75mm; accepts stranded PMMA/glass or large core fiber.
Harness 28mm
Mounting and Ventilation Vertical, on wall; horizontal on raised concrete slab; mountingstand optional; in-ground mounting optional (contact VLT); 50 cfm minimum air volume; airintake and/or exhaust can be attached to 3" duct for routing of ventilation up to 13' away fromilluminator; 6" all sides recommended clearance; -30°C min/+40°C max (-22°F min/104°F max) operating temperature.
Listings UL, cUL Listed; CE marked.
IP45 Wet location
rating
Rugged, vandal-
resistant, lockable
enclosure
Zero light leak
Available mounting
bracket/planter stand
IP45
AIRFLOW GUIDE
I L L U M I N A T O R S 19
tel: 949.581.9398 | fax: 949.581.2947 | [email protected] | www.visual-lighting.com | 9 Rancho Circle, Lake Forest, CA 92630
P l e a s e r e f e r t o V L T L u x C a l c u l a t o r f o r a l l P h o t o m e t r i c s a n d B e a m A n g l e s
PC Permanent Color Filter (refer to pg. 51 for selection)CW/E Extended Palette Color Wheel (refer to pg. 53 for selection)CW/C Custom Color Wheel (specify any colors, may require long lead time;
use form on pg. 53 to specify custom choices)TW/B Twinkle Wheel with Bars (refer to pg. 56 for details)TW/SS Twinkle Wheel for Shooting Star (refer to pg. 56 for details)TW/CW Twinkle / Color Wheel (refer to pg. 53 for selection)TW/CD Twinkle / Color Wheel w/ Crushed Dichroics (refer to pg. 53 for selection)
MS3 3.6rpm Continuous Wheel MotorMS5 5.0rpm Continuous Wheel Motor2LCN Dual Line Cord for Continuous Wheel ControlMB Mounting Bracket / Planter Stand (refer to pg. 58 for details)VRC Vandal Resistant Cover to protect fiber (refer to pg. 58 for details)KL Keyed Lock for Illuminator Door (refer to pg. 59 for details)*For DMX controls and other system accessories, please refer to theAccessories section of this binder.
Modifiers & Accessories
–__________–__________–__________ /__________–__________–__________
Illuminator
Roblon Silver Series 150w
Color Temperature
4 4,200°K
Port Size
28 28mm(1,000-0.75mm fibers)
Enclosure
W Wet Location
Voltage
MVOLT Electronic 100-240v / 50-60Hz
Control Options
W WhiteN Continuous WheelD1 DMX Single WheelD2 DMX Dual Wheels
Wheel Options
W WhiteS Standard ColorsD Standard DouserS2 Standard Colors & Douser (D2 only)T Standard Twinkle
LGS150 4 28 W MVOLT
CY1-AD
page 1
3750 IH35 NorthSan Antonio, Texas 78219[PH] +1-210-227-7329[FAX] +1-210-227-4967
©2016 Lucifer Lighting CompanyAs part of its policy of continuous research and product development, the company reserves the right to change or withdraw specifications without prior notice.
[email protected] for technical or installation inquiries.
[071416]
CY1-ADMICRO-CYLINDER LED LUMINAIRE SURFACE MOUNT ADJUSTABLE
DESCRIPTION
TECHNICALCONSTRUCTIONDie-cast aluminum body; extruded aluminum internal heat-sink; painted finishes are granulated powder coat.
LEDXicato LED module available in configurations of 80+ CRI 700,1000 and 1300, 95+ CRI 1000 lumen packages with 40° beam angle, and 80+ CRI 1000 lumen package and 95+ CRI 700 lumen package with 15° and 25° beam angles. Color temperatures are 2700K (+/- 40K), 3000K (+/- 50K), 3500K (+/- 60K) and 4000K (+/- 70K). Average rated lamp life: 50,000 hours. LED module and integral driver field replaceable.
DIMMING PROTOCOLAnalog 0-10v and ELV integral driver dims to nominal 10% lm output. PS-RMT remote 1TR1 & UAN1 dim to nominal 10%, 1L21, UL31 & ULH1 dim to 1% lm output; UEA1 & UED1 dim to 1/10th of 1%.
MOUNTINGFixture is supplied with a mounting adaptor plate, which integrates with required additional mounting accessories specified separately
according to field application conditions, providing a minimal-ist transition from standard 3/0, 4/0 or 4” square j-boxes and accommodates ceiling thicknesses of .44” (7/16, 12mm) to .75” (3/4”, 20mm).Ceiling mount J-box accommodates two inline ½” conduits and features concealed internal clamps for clean fitting-free conduit exit and entry.
LISTINGTUV/CTUV listed to the UL1598 standard. IP10 rated for inte-rior/ dry/ damp use, or optional IP54 rated (only with powder coat finishes) for exterior/ wet location use. Patent pending.
WARRANTYManufacturer’s one year warranty guarantees product(s) listed to be free from defects in material, workmanship under normal use and service. Warranty is conditional upon the use of manufacturer supplied transformer or ballast. LED war-ranted to operate with 70% lumen maintenance from the date of sale by Seller for 3 years. See full conditional warranty for complete details.
LED/ OPTIC DISTINGUISHING FEATURES FIXTURE DISTINGUISHING FEATURES
A SPECIAL FEATURES Die-cast aluminum body; power supply may be integrat-ed into fixture canopy; tapered aperture for increased efficiency; toolless 42° hot aim tilt and 357° rotation; may be mounted to ceiling as downlight or floor as up-light; consult factory if 90° tilt is required (90° option in painted finishes only, adds 2-4 weeks to lead-time).
B OPTICS/ EFFECTS DEVICES Optics control and provide smooth beam angle; fixture accepts 1 total effects device (lens); IP10 Interior version comes standard with no lens and IP54 Exterior version requires lens sealed in place, clear lens as standard or designate alternate lens as desired.
C MOUNTING Surface mounted*:• CY1-JBMP - May be specified to mount flush with mini-
malist transition with hidden hardware to standard j-box installed above ceiling.
• CY1-SMK-3/0 - Available with finished plate that mounts between fixture and j-box for existing installations where standard 3/0 or 4/0 j-box cutout is to be concealed.
Ceiling mounted J-box:• CY1-CMJB-2I - Optional junction box accessory perfectly
matches the cylinder profile for a continuous, integrated look where exposed ceiling mount junction box and
Color Consistency 1x2 SDCMStandard Series 80+ CRI R9=16, R13= 81 ,R15=75Standard Series 95+ CRI R9=98, R13= 98 ,R15=98Construction Aluminum & glassBeam Configuration Beam optics field interchangeable
between 15°, 25°, and 40° beamconfigs
Construction Die-cast aluminum bodyFinishes Granulated powder coat or treated metalsPower Supply Available as integrated or remote mounted.Aperture Tapered; regressed light sourceAdjustment Hot-Aim: 42° tilt and 357° rotationLight Tuning Accepts 1 effects device
conduit applications apply; j-box is IP10 rated; painted finishes only.
Remote power supply:• PS-RMT - Additional driver options available for remote mounting.
NOTE: *Not recommended for use with pancake style junction box.
2.5” (64mm)
42°
5.6”
(142
mm
)
C
A
B
1.5”
(38m
m)
3.8”
(97m
m)
T24
Fixture weight - 1.4 lbs
CY1-AD
page 2
3750 IH35 NorthSan Antonio, Texas 78219[PH] +1-210-227-7329[FAX] +1-210-227-4967
©2016 Lucifer Lighting CompanyAs part of its policy of continuous research and product development, the company reserves the right to change or withdraw specifications without prior notice.
[email protected] for technical or installation inquiries.
[071416]
Example Model Number: CY1-AD-1-MA-80X-10B30-2-AE-0
PHOTOMETRICS
CY1-AD-BEAM OPTICFINISH
NOMINAL SYSTEMCONFIGURATION
COLORTEMPERATUREIP RATING
POWER SUPPLY/ DIMMING
EFFECTSDEVICE
¨ EMB-S-20/25-120/277-LEDX 20/25 watt max capacity, 120 or 277 VAC 60Hz
¨ EMB-S-100-120-LEDX 100 watt max capacity, 120 VAC 60Hz
¨ EMB-S-100-277-LEDX 100 watt max capacity, 277 VAC 60Hz
¨ EMB-S-250-120/277-LEDX 250 watt max capacity, 120 or 277 VAC 60Hz
• Custom painted finishes offered, consult Factory to confirm preferred color availability. • Custom paint finishes require 8-12 week lead-time.• Custom plating not available.
0 No Lens (Standard)1 Linear Spread2 Honeycomb Louver3 Clear Glass4 Soft Focus5 Frosted Glass6 Frosted Soft Focus
(IP10 Standard with No Lens;IP54 Standard Clear Glass Lens, not available with Linear Spread lens orHoneycomb Louver)
80X-07B 80+ CRI, 7W/700lm (RMT remote driver only)80X-10B 80+ CRI, 10W/1000lm80X-13B 80+ CRI, 14W/1300lm95X-10B 95+ CRI, 15W/1000lm (Only for 40° beam optic)
80X-10C 80+ CRI, 10.9W/1000lm95X-07C 95+ CRI, 9.7W/700lm (Only for 25° or 15° beam optic) (Lumens are rated output for raw LED)
2 40°
1 25°4 15°
AE 120-277V 50Hz/ 60Hz Electronic Analog 0-10 and 120V Electronic ELVRMT Remote Driver (See pg 3)
27 2700K30 3000K35 3500K40 4000K
MA Metallic Aluminum (Natural Aluminum with Clear Coat)WH Matte White Powder CoatBK Matte Black Powder Coat
Items in Gray indicate Title 24 compliance
Lumen Package80X-07B40° Optic
80X-10B40° Optic
80X-13B40° Optic
95X-10B40° Optic
80X-10C15°/25° Optic
95X-07C15°/25° Optic
Power Consumption 7 watts 10 watts 15 watts 14.2 watts 10.9 watts 9.7 watts
LED Source lm/w 129 lm/w 118 lm/w 111 lm/w 89 lm/w 89 lm/w 72 lm/w
Delivered Output 542 lm 726 lm 974 lm 779 lm pending pending
Fixture lm/w 77 lm/w 73 lm/w 65 lm/w 55 lm/w pending pending
ORDERING (FIXTURE)
1 IP10 (Interior)2 IP54 (Exterior/Wet) (Only with WH or BK powdercoatfinishes)
EMERGENCY LIGHTING
T24
During disruption of main power, remote installed emergency battery inverter provides temporary power supply to fixture. Select based on system power of specified fixture, or voltage needs.
ACCESSORIES
Lenses¨LSL-CY1 Linear Spread Lens¨HCL-CY1 Honeycomb Louver¨CGL-CY1 Clear Glass Lens¨SFL-CY1 Soft Focus Lens¨FGL-CY1 Frosted Glass Lens¨FSFL-CY1 Frosted Soft Focus LensNOTE: Lenses as sealed in fixtures designated IP54 wet location are not interchangeable.
--------------------------------------Reflectors¨LRR-CY1-1 25° LED replacement reflector¨LRR-CY1-2 40° LED replacement reflector¨LRR-CY1-4 15° LED replacement reflector
CY1-AD
page 3
3750 IH35 NorthSan Antonio, Texas 78219[PH] +1-210-227-7329[FAX] +1-210-227-4967
©2016 Lucifer Lighting CompanyAs part of its policy of continuous research and product development, the company reserves the right to change or withdraw specifications without prior notice.
[email protected] for technical or installation inquiries.
[071416]
ORDERING (MOUNTING)
Mounting plate (concealed) for standard j-box. To be installed during rough-in prior to substrate. NOTE: Not recommended for use with pancake style junction box.
QSCY1-JBMP
Ceiling mount j-box. IP10 rated.QSCY1-CMJB-2I-
CY1-CMJB-2ICeiling mount J-Box2.3” (58mm) height
CY1 Assembly
Mountingadaptor plate
included
1/2” EMT conduit (by others), no fitting required
QSCY1-SMK-3/0-
QSCY1-SMK-4/0-
WH WhiteBK BlackMA Machined Aluminum
Surface mount kit for standard 3” 3/0 j-box with 4” diameter concealer plate. NOTE: Not recommended for use with pancake style junction box.
CY1-SMKJ-Box mountingPlate
CY1 Assembly
Concealer Plate
Mounting adaptor plate
Ceiling substrate, cutout as requiredMounting
adaptor plate
CY1-JBMP
CY1 Assembly
Existing J-Box
Ceiling substrateØ2.3” (57mm)
clearance cutout
One blank off plug supplied with each CY1-CMJB-2I(additional plug may be ordered)
FINISH
WH WhiteBK Black
FINISH
1/2” blank off plug for above j-box.(If additional plug is desired.)
CY1-CMJB-1/2-PLG-
Surface mount kit for standard 4” 4/0 j-box with 5” diameter concealer plate. NOTE: Not recommended for use with pancake style junction box.
OPTIONAL ACCESSORY
Internal j-box viewwith cover removed
Terminal block for trim connections
1TR1 120V 60Hz Triac 1L21 120V 60Hz Lutron Forward Phase 2-WireUL31 120-277V 50Hz/60Hz Lutron A-Series EcoSystem/ 3-WireULH1 120-277V 50Hz/60Hz Lutron H-series EcoSystem; Fade to BlackUAN1 120-277V 50Hz/60Hz Analog 0-10vUND1 120-277V 50Hz/60Hz Non-DimmingUEA1 120-277V 50Hz/60Hz EldoLED Analog 0-10vUED1 120-277V 50Hz/60Hz EldoLED DALI
PS-RMT-PS-RMT
Conduit & wiringsupplied by others
-
Line/Mains voltage wiring leadsNOTE: Consult factory for maximum allowable
secondary run lengths between PS-RMT and fixture.
2” (51mm)6.6” (168mm)
3.2” (81mm)
PS-RMT weight - 1.4 lbs
80X-07B80X-10B80X-13B95X-10B80X-10C95X-07C
Must match sys-tem configuration selected for fixture
NOMINAL SYSTEMCONFIGURATION
POWER SUPPLY/ DIMMING
Mounting device above still required.
QSQuick Ship eligible options (Must add “-QS” to end of model number if requesting Quick Ship option)
Tolomeo Hook Suspension SPECIFICATIONSTOU1101
Design ByMichele De LucchiGiancarlo Fassina
Collection
Outdoor
Colors & Finishes
Basalt (Diffuser)
Aluminum (Hook)
Materials• Hook and body in aluminum• Diffuser in Paola Lenti Thuia outdoor fabric
Dimensions
Light distribution
Diffused
Red = Max Cd. Through Vertical plane
Blue = Max Cd. Through Horizontal plane
Luminaire weight
9.04 lbs / 4.1 kg
Warranty5 year limited warranty
Specifications
Lumen output 1735lm
Light output ratio N/A
Power consumption 23W
Led type 20W C.O.B.*
CCT (Correlated Color Temperature) 3000K
CRI (Color Rendering Index) >90
Life expectancy 50000Hrs
Control type Dimmable 2-Wire
Input Voltage 120V
Driver N/A
BUG Rating N/A
*Integrated light source
Features & Accessories• Structural elements of Tolomeo floor reinforced for outdoor use• Lighting source fitted inside a transparent IP65 plastic unit that recalls old lanterns• Cord length is 16 feet 5 inches (5m)
Packaging
2 Boxes
1 x 25-11/16" x 12-11/16" x 12-11/16" / 5.51 lbs - 65 cm x 32 cm x 32 cm / 2.5 kg
1 x 21-3/4" x 21-3/4" x 15-13/16" / 5.29 lbs - 55 cm x 55 cm x 40 cm / 2.4 kg
last updated: 2017-05-05 We reserve the right to change specifications of our products.For the latest product information please visit www.artemide.net
415-504-3536
Kore-EX5 IP65 Cable Mount Pendant with Labyrinth Orb ShadeExton Powerspan Cable System
415-504-3536 TG43 6/8/17 • • teganlighting.com [email protected] •
Category: Exton System features Tegan’s exclusive Powerspan Cable. Tensioned or swagged mounting with various Gems, Glass Envelopes and Shades. Designed for use with a remote Power Supply Enclosure with Driver. Optional 0-10V Dimming.
Material: Power Cable: Embedded stainless steel wire in the center of the Custom Cable with 10 gauge conductors inside a IP-65 Self-Sealing Jacket. Mounting: Powdercoated or anodized steel and aluminum. Kore-EX5 LED Module: UV stable exterior anodized aluminum, UV stable polycarbonate glass lenses, rubber O-rings. Gem: 100% machined, clear/frosted acrylic or hand-blown, tooled glass. Labyrinth Shade: 100% Cotton or Hemp with an exterior Coatiing.
Finish: Powerspan Cable: Black (BLK). Custom finishes not available. Kore-EX5 LED Module: Exterior rated, brushed, two-step electrolytic color anodizing. Anodized Black (BLK) or Anodized Aluminum (AL). Gem: Clear/frosted acrylic. Pendant Power Cord: Clear with aluminum Kore-EX5 Module and black with black Kore-EX5 Module. Mounting: Anodized Aluminum or Powder Coat Black.
Power Supply Refer to Exton Power Supply IP20 Specsheet, IP24 Specsheet or IP66 Specsheet for details.Enclosure:
Powerspan Exton Powerspan, Self-Sealing Cable is IP-65 for interior/exterior use. Supplied in 1’ (30.5cm)Cable: increments, with End Cap, as a stand alone to be tensioned or swagged. Field cuttable.
Mounting: Surface Mount 2” Wrap Bracket, Black (EX-SWB-2-BLK), Surface Mount 3” Wrap Bracket, Black (EX-SWB-3-BLK), Vertical Surface Mount Bracket, Black finish (EX-VSB-BLK), Horizontal Surface Mount Bracket, Black finish (EX-HSMB-BLK), Standoff Bracket, Black finish (SOBR-BLK) Surface Mount “Drape” Bracket, Black finish (EX-FSDB-BLK), Tensioning Surface End Bracket, Black finish (EX-TSEB), Tree Strap & Buckle, Black finish (EX-TSB-BLK). Exton End Cap - Black finish (EX-EC-BLK).
Pole Mounting: Tegan has partnered with AV Poles & Lighting. Poles can be ordered from Tegan Lighting. AV is well-versed on the Exton System and has installed many similar tensioned projects. As required, engineering services will be provided in the quote to insure proper structural installation per code requirements. Refer to Exton Application Guide for information and more details. Poles can also be provided by others; engineering is required by others to ensure structural integrity. Note: Tegan will not be responsible for Poles/Engineering provided by others.
Cable Span: Maximum Cable mounting is 110’ (33.5m). Note that the cable must be a continuous run without interruption.
Kore-EX5 LED Kore-EX5 LED Pendant - Anodized Aluminum or Anodized Black finish.Module:
Power Feed: Exton IP-65 Power Feed for Remote Power Supply - Black Finish (EXPF-BLK); Field paintable; contact Factory for custom colors. J-Box by others.
LED: High Wattage Array Cree LED, 2-Step Macadam. 5W @ 500 (estimated; in testing) with 2700K 82-85 CRI typical. All values are initial lumens. For exact lumen output and wattage consumption data, please consult LM79 reports. Online power consumption does not include driver losses. Contact factory for 2400K, 3500K, 4000K or 90 CRI.
Optics: A 15° reflector is supplied in all decorative options to maximize decorative element illumination.
Electrical: 24VDC. Total input watts: 6.5W. 250W max. per circuit.
NEWFeaturing Tegan’s Exclusive
“Powerspan Cable”
415-504-3536
Kore-EX5 IP65 Cable Mount Pendant with Labyrinth Orb ShadeExton Powerspan Cable System
415-504-3536 TG43 6/8/17 • • teganlighting.com [email protected] •
Remote The Exton System is designed for use with a Remote Power Supply Enclosure and Driver. Refer to Power Supply: Exton Power Supply IP20 Specsheet, IP24 Specsheet or IP66 Specsheet for details. Use of Tegan Lighting Power Enclosures and Drivers only. If supplied “by others” the warranty and listing are void.
Gems: Flat Gem, Frosted Cylinder Gem.
Architectural 12” Labyrinth Orb Shade, Natural White Cotton, 12” Labyrinth Orb Shade, Natural Shades: Hemp finish or 12” Labyrinth Orb Shade, Custom Color with Wet Location Coating. Contact the factory for sizes and shapes. Engineering: Due to mathematical laws, tightening and loading any taut end-supported flexible cable puts tensile loads upon its supports (walls, trees, posts, etc.) that is orders of magnitude greater than the weight of the cable and its dynamic loading. Taut installations require extremely strong end supports, and it is up to the specifier and installer to match the strength of the end support structures with the combined level of tautness and static (weight of cable/fixtures) and dynamic (e.g. wind/ice/vermin) load of the cable.
Installation: Refer to Installation Instructions Sheet 23 for details. For system layout, and specification assistance, refer to the Exton Application Guide for details.
Labels: ETL Listed; Tested to UL 2108 Low Voltage Lighting Systems. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on teganlighting.com are the most recent version and supersede all other versions that exist in any other printed or electronic form. Kore-EX5 Module and Powerspan Cable - 3 year warranty. Labyrinth Architectural Shades: limited one year warranty. Refer to Exton Application Guide for details. Consult with an Arborist for proper tree installation per the type of tree(s). Tegan Lighting is not liable for any damage/injury as a result of tree installation. Refer to Installation Instructions Sheet 23 for more details.
250WMAX
0-10VDimming
LED24VDC
IP65
415-504-3536
Kore-EX5 IP65 Cable Mount Pendant with Labyrinth Orb ShadeExton Powerspan Cable System
415-504-3536 TG43 6/8/17 • • teganlighting.com [email protected] •
Exton - Cable - Mounting Brackets
Surface Mount 2” Wrap Bracket, Black (EX-SWB-2-BLK) Surface Mount 3” Wrap Bracket, Black (EX-SWB-3-BLK)Surface Mount Wrap Bracket, 2 3/16” (55.5mm) or 3 3/16” (81mm), for Exton Powerspan Cable mounting to any suitable surface; wall, tree, pole, beam, etc. to continue up to a 110’ (33.5m) run. 250W per run. Available in anodized Black (BLK) finish. Can be field painted or contact factory for custom colors. Refer to Installation Instructions Sheet 23 and Exton Application Guide for details. Refer to page one for mounting Exton Brackets to Pole(s).
Surface Mount Wrap Bracket
ø 2”(50.8mm)
1 1/2”(38mm)
2 3/16”(55.5mm)
Vertical Surface Mount Bracket
15/16”(24mm)
1/2”(12mm)
1 3/8”(35mm)
Vertical Surface Mount Bracket, Black (EX-VSB-BLK)Vertical Surface Mount Bracket for Exton Powerspan Cable can be mounted to any suitable surface; wall, tree, pole, beam, etc. 250W per run, for up to a 110’ run. Available in anodized Black (BLK) finish. Can be field painted or contact factory for custom colors. Refer to Installation Instructions Sheet 23 and Exton Application Guide for details. Refer to page one for mounting Exton Brackets to Pole(s).
Horizontal Surface Mount Bracket, Black (EX-HSMB-BLK)Horizontal Surface Mount Bracket for Exton Powerspan Cable can be mounted to any suitable surface; wall, tree, pole, beam, etc. 250W per run, for up to a 110’ run. Available in anodized Black (BLK). Can be field painted or contact factory for cus-tom colors. Refer to Installation Instructions Sheet 23 and Exton Application Guide for details. Refer to page one for mounting Exton Brackets to Pole(s).
Horizontal Surface Mount Bracket
1/2”(12mm)
1 3/4”(45mm)
ø 2”(50.8mm)
3 3/16”(81mm)
1 1/2”(38mm)
36° 60°
Exton - Powerspan Cable
Exton - Powerspan Cable - Black (EX-C-BLK) Exton Self-Sealing Powerspan Cable is IP-65 for interior/exterior applications. Order in 1’ (30.5cm) increments for up 110’ (33.5m) maximal span. Field cuttable. 24VDC at 250W Max. per run. Available in Black finish (only). Refer to Installation Instruc-tions Sheet 23 and Exton Application Guide for details.
Exton - Powerspan Cable
11/16”(17.5mm)
5/16””(7.3mm)
stainless steel wire
10 guage conductors
Exton End Cap - Black Finish (EX-EC-BLK) Exton End Cap is for interior/exterior applications. One (1) required per run. Available in Black finish (only). Refer to Installation Instructions Sheet 23 and Exton Application Guide for details.
Exton - End Cap
3/8”(55.5mm)
5/8”(55.5mm)
415-504-3536
Kore-EX5 IP65 Cable Mount Pendant with Labyrinth Orb ShadeExton Powerspan Cable System
415-504-3536 TG43 6/8/17 • • teganlighting.com [email protected] •
Exton - Cable - Power Feed
Exton IP-65 Power Feed for Remote Power Supply (EX-PF-BLK) The IP-65 Power Feed will allow the Exton Power Cable to be feed into a building or Pole for connection to a Remote Power Supply. The Power Feed is not structural. It is for feeding wire (only) into a building, pole, etc. to make an electrical connection. It can not be used for tensioning. Field-paintable. Can mount to a building structure or pole. Available in Black (BLK) finish. Contact factory for custom colors. Tensioning Bracket shown is ordered separately. Remote Power Supply; refer to Specification Sheet 24 for options. Refer to Installation Instructions Sheet 23 and Exton Application Guide for details.
5”(127mm)
5”(127mm) 3 -1/2”
(89mm)
Exton IP-65 Power Feed for Remote Power Supply
4”(102mm)
Tree Strap & Buckle (EX-TSB) Tree Strap & Buckle Bracket for Exton Powerspan Cable mounting to a tree. 1500 lb. test, UV-resistant, water-resistant. Field-cuttable. 10’ (3m) long; contact factory for alternative strap lengths longer than 10’ in 1’ increments. Available in Black (BLK) finish (only). Galvanized Stainless Steel buckle. Tensioning Bracket shown is ordered separately. Refer to Installation Instructions Sheet 23 and Exton Application Guide for details.
Tree Strap & Buckle120” (3m) long
x 1” (25.4mm) wide
1” (25.4mm)Stainless Steel Cam
Buckle
Exton - Cable - Mounting Brackets
Tensioning Surface End Bracket, Black (EX-TSEB-BLK) Tensioning Surface End Bracket for Exton Powerspan Cable installations. Can be mounted to any suitable surface; wall, tree, pole, beam, etc. 25° Horizontal side adjustment. Two Tensioning brackets required per tensioned run. Brackets can be installed side-by-side for multiple runs. 250W per run. Available in anodized Black (BLK) finish. Can be field painted or contact factory for custom colors. Refer to Installation Instructions Sheet 23 and Exton Application Guide for details.
4 -3/8”(111mm)
1 -13/16”(46mm)
2 -7/16”(46mm)
Standoff Bracket, Black (EX-SOBR-BLK)Spacer to be used with Vertical or Horizontal Surface Mount Brackets to allow room for the EX5 module and the cable clamp when the module is positioned nearby the mounting surface. Available in Black (BLK). Refer to Installation Instruc-tions Sheet 23 and Exton Application Guide for details.
Standoff Bracket
1 -13/16”(46mm)
11/16”(18mm)
CA
BLE
NO
N-T
ENSI
ON
ING
DRA
PE O
PTIO
NS
11/16”(18mm)11/16”
(18mm)
Standoff Bracket
Standoff Bracket
Ceiling
Wall
Flexible Surface Mount “Drape” Bracket, Black (EX-FSDB-BLK) Flexible Surface Mount Bracket for “draped” Exton Powerspan Cable installations. Can mount to any suitable surface; wall, tree, pole, beam, etc. 250W per run. 4.25” (115mm) long; can be made to specified length (not cuttable). Stainless steel and Black anodized aluminum. Refer to Installation Instructions Sheet 23 and Exton Ap-plication Guide for details. Refer to page one for mounting Exton Brackets to Pole(s).
Flexible Surface Mount “Drape” Bracket
1 -3/8”(34mm)
4 -1/4”(134mm)
415-504-3536
Kore-EX5 IP65 Cable Mount Pendant with Labyrinth Orb ShadeExton Powerspan Cable System
415-504-3536 TG43 6/8/17 • • teganlighting.com [email protected] •
Kore-EX5 LED Pendant, Cable Mount, Flat Gem, Labyrinth Orb Shade
(EX5-K-PX-C-FG-AL-LO-NC/NH/CC) (EX5-K-PX-C-FG-BLK-LO-NC/NH/CC)Kore-EX5: Aluminum or Black Finish; Labyrinth Shade: Natural Cotton/Natural Hemp/Custom Color
ø 12 1/8”(308mm)
14’(4.3m)
14 3/4”(375mm)
1. Order Power Supplies separately. Refer to Exton Power Supply IP20 Specsheet, IP24 Specsheet or IP66 Specsheet for options. 2. 24VDC Operation.3. Power Cord is factory cut (X) to 1’ (.3m) up to 14.5’ (4.5m). Specify desired length, not field cuttable. Contact factory for longer lengths.
Exton - Kore-EX5 - “Gem” Types
ø 1 -5/8”(41mm)
Exton Flat Gem - Frosted Acrylic Flat Gem for Kore-EX5. Frosted interior.
Exton Cylinder Gem - Frosted Acrylic Cylinder Gem for Kore-EX5. Frosted interior with clear lower third.
ø 1 -5/8”(41mm)
2 -1/2”(64mm)
7/16”(11mm)
1. Contact factory for a custom design gem.
Exton - Kore-EX5- Architectural Shade - Woven Type12” Labyrinth Orb Shade, Natural White Cotton
12” Diameter. Hand-Woven, 100% Natural White Cotton, Natural Hemp or Custom Color Shade. Exterior rated coating. Contact factory for custom colors, sizes and shapes. See page 1 for warranty.
ø 12 1/8”(308mm)
12” Labyrinth Orb Shade, Natural Hemp
12” Labyrinth Orb Shade, Custom Color
415-504-3536
Kore-EX5 IP65 Cable Mount Pendant with Labyrinth Orb ShadeExton Powerspan Cable System
415-504-3536 TG43 6/8/17 • • teganlighting.com [email protected] •
Kore-EX5 LED Pendant, Cable Mount, Frosted Cylinder Gem, Labyrinth Orb Shade
(EX5-K-PX-C-FCG-AL-LO-NC/NH/CC) (EX5-K-PX-C-FCG-BLK-LO-NC/NH/CC)Kore-EX5: Aluminum or Black Finish; Labyrinth Shade: Natural Cotton/Natural Hemp/Custom Color
ø 12 1/8”(308mm)
14’(4.3m)
14 3/4”(375mm)
12” Labyrinth Orb Shade, Natural Cotton
1. Order Power Supplies separately. Refer to Exton Power Supply IP20 Specsheet, IP24 Specsheet or IP66 Specsheet for options. 2. 24VDC Operation.3. Power Cord is factory cut (X) to 1’ (.3m) up to 14.5’ (4.5m). Specify desired length, not field cuttable. Contact factory for longer lengths.
415-504-3536 TG43 4/19/17 • • teganlighting.com [email protected] •
Click on the linked images below to visit the Exton Gallery.
Kore-EX5 LED Pendant, Cable Mount, Black,Frosted Cylinder Gem, Labyrinth Orb Shade,
Natural Hemp
Kore-EX5 LED Pendant, Cable Mount, Black,Frosted Cylinder Gem, Labyrinth Orb Shade,
Custom Color
Kore-EX5 LED Pendant, Cable Mount, Black,Frosted Cylinder Gem, Labyrinth Orb Shade,
Natural Cotton
Tegan’s Exton Application Guide features installation examples with complete BOM! Click on the linked image below.
Category: Tegan Lighting offers a wide variety of 24VDC drivers that are compatible with Exton Monopoints and Systems for various layouts. Specify 0-10V dimming controls with dimming LED drivers. Refer to the linked driver specification sheets in the chart on page 3 for details.
Exterior IP24Enclosures: Exterior Mount Large Remote Power Supply Enclosure - Exterior - IP24 (LRPSE-EX-IP24). Remote mounting the power supplies provide a clean minimalist aesthetic. Wet Listed Nema 3R enclosure protects power supply from rain, snow, and ice outdoors. Bottom mounted KOs allow attachment to supply power, as well as to Kore-EX Powerspan Cable. It should be installed in an outdoor location not subject to washdowns or within a few feet of a sprinkler head. Material: Steel.
Finish: “ANSI 61 Grey” finish. Enclosures can be field painted to match the structure or contact the factory for custom colors.
Systems: Exton Monopoint, Exton Cable. Remote Power Supplies are required for all Exton Cable and Trac systems. Refer to linked Specsheets and Installation Sheets for system details..
Drivers: Refer to pp. 2-3 for details. Exton Systems can only be used with Tegan Lighting’s Power Supply Enclosures and Driver(s). Exton Systems can only be used with Tegan Lighting’s Power Supply Enclosures and Driver(s). Any substitution “by others” will void the warranty and listing. Refer to notes under power supply charts regarding derating recommendations.
LED Modules: Kore-EX5. Total Input Power 6.5W.
Installation: Electrical contractor to connect electrical wire from the transformer to the system power feed utilizing the correct gauge to provide the proper voltage at the Systems/Monopoints per local standards and codes. The wire gauge used to supply power to the Systems/ Monopoints should be sized according to the distance between the transformer and the Systems/Monopoints. Enclosure and power supply are provided as a kit. Refer to Exton Cable Installation Instructions #23 and Exton Monopoint Installation Instructions #24 for details. Refer to Exton Application Guide for layout and specification assistance.
Labels: IP24 Enclosure - Exterior Listed. - UL-50 Type 3R, CSA Type 3R, Complies with Nema Type 3R & IEC 60529, IP24.
Refer to linked Power Supply Specsheets on the following pages for Manufacturer’s listing. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on teganlighting.com are the most recent version and supersede all other versions that exist in any other printed or electronic form.
24VDCPower Supplies - Exton System - Exterior Rated - IP24
teganlighting.com • [email protected] • (415) 504-3536 • TG116 8/17 1
LED24VDC
WLIP24
Power Supply Enclosure - IP24 EXTERIOR MOUNTING 1, 2, 3, 4, 5
Wet Listed IP24 Nema 3R enclosure protects power supply from rain, snow, and ice outdoors. Bottom mounted KOs allow attachment to supply power, as well as to Kore-EX Power Span Cable. It should be installed in a relatively protected outdoor location not subject to washdowns or within a few feet of a sprinkler head. “ANSI 61 Grey” finish (GY). Enclosure ships with the Driver(s) installed.
Large Remote Power Supply IP24 Enclosure
24VDC
40W - Will operate 4 Kore-EX5 Modules 40W Non-Dimming Driver (D-40W-120/277V-IP24-LRPSE-GY) 40W 0-10V Dimming Driver (D-DM-40W-120/277V-IP24-LRPSE-GY)
60W - Will operate 7 Kore-EX5 Modules 60W Non-Dimming Driver (D-60W-120/277V-IP24-LRPSE-GY) 60W 0-10V Dimming Driver (D-DM-60W-120/277V-IP24-LRPSE-GY)
100W - Will operate 11 Kore-EX5 Modules
100W Non-Dimming Driver (D-100W-120/277V-IP24-LRPSE-GY) 100W 0-10V Dimming Driver (D-DM-100W-120/277V-IP24-LRPSE-GY)
150W - Will operate 17 Kore-EX5 Modules 150W Non-Dimming Driver (D-150W-120/277V-IP24-LRPSE-GY) 150W 0-10V Dimming Driver (D-DM-150W-120/277V-IP24-LRPSE-GY)
240W - Will operate 27 Kore-EX5 Modules 240W Non-Dimming Driver (D-240W-120/277V-IP24-LRPSE-GY) 240W 0-10V Dimming Driver (D-DM-240W-120/277V-IP24-LRPSE-GY)
320W - Will operate 36 (Non-Dimming) Kore-EX5 Modules 320W Non-Dimming Driver (D-320W-120/277V-IP24-LRPSE-GY) 288W - Will operate 32 Kore-EX5 Modules 288W 0-10V Dimming Driver (D-DM-288W-120/277V-IP20-LRPSE-GY)
Notes:1 Exton System, Monopoints and LED Modules are specified separately. Refer to the linked Specification Sheets on p. 1 for more detail.2 See tables on p. 3 for Power Supply links. 3 Due to the rapidly evolving technology for semiconductor products, Tegan driver options are subject to change at any time, without notice. In addition, if any of the standard drivers are out of stock or discontinued, Tegan Lighting will supply an equal as needed. Tegan can also supply alternative drivers upon request; contact the factory for details.4 Enclosures can be field painted to match the structure or contact the factory for custom colors.5 We have listed the maximum number of Kore-EX5 Modules for each Driver option above based on the following common practice.: Recommended De-Rating: Like all electronic power supplies, life is significantly increased when loads are 75/80% or less of the nominal power capacity. Best life is in climate controlled conditions, or when the power supply stays below 70C. The type of enclosure and ambient environment can affect the operating temperature, and therefore the lifetime of the power supply. For all Tegan Lighting enclosures, load power supplies to only 75/80% of their nominal. These are general suggestions to increase the life of the supply in moderate climates; the actual operating lifetime of the power supply depends on the actual environment and use. Do not operate the power supplies during the day with direct sunlight with extreme hot temperatures.
4 -3/16” (107mm)
12 -1/8” (308mm)
8 -1/2” (126mm)
Power Supplies - Exton System - Exterior Rated - IP24
teganlighting.com • [email protected] • (415) 504-3536 • TG116 8/17 2
Description Max # of Kore-EX5 Fixtures
Catalog # Watts1 Min / Max3 Tegan Enclosure Size
Exterior Enclosure
LinksTypical Driver Links
40W Non-Dimming Driver 4 D-40W-120/277V-IP24-LRPSE-GY 40W 1W / 30W
Large12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure 40W Non-Dimming Driver
40W 0-10V Dimming Driver 4 D-4M-60W-120/277V-IP24-LRPSE-GY 40W 1W / 30W
Large12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure
40W Driver & Dimming Module
60W Non-Dimming Driver 7 D-60W-120/277V-IP24-LRPSE-GY 60W 1W / 49W
Large12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure 60W Non-Dimming Driver
60W 0-10V Dimming Driver 7 D-DM-60W-120/277V-IP24-LRPSE-GY 60W 1W / 49W
Large12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure
60W Driver& Dimming Module
100W Non-Dimming Driver 11 D-100W-120/277V-IP24-LRPSE-GY 100W 1W / 77W
Large12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure 100W Non-Dimming Driver
100W 0-10V Dimming Driver 11 D-DM-100W-120/277V-IP24-LRPSE-GY 100W 1W / 77W
Large 12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure
100W Driver& Dimming Module
150W Non-Dimming Driver 17 D-150W-120/277V-IP24-LRPSE-GY 150W 1W / 119W
Large 12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure 150W Non-Dimming Driver
150W 0-10V Dimming Driver 17 D-DM-150W-120/277V-IP24-LRPSE-GY 150W 1W / 119W
Large 12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure
150W Driver& Dimming Module
240W Non-Dimming Driver 27 D-240W-120/277V-IP24-LRPSE-GY 240W 1W / 189W
Large 12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure 240W Non-Dimming Driver
240W 0-10V Dimming Driver 27 D-DM-240W-120/277V-IP24-LRPSE-GY 240W 1W / 189W
Large 12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure
240W Driver& Dimming Module
320W Non-Dimming Driver 36 D-320W-120/277V-IP24-LRPSE-GY 320W 1W / 252W
Large 12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure 320W Non-Dimming Driver
288W 0-10V Dimming Driver 32 D-DM-288W-120/277V-IP24-LRPSE-GY 288W 1W / 230W
Large 12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure
320W Driver& 288W Dimming Module
24VDC Power Supplies - LED Drivers - IP24 EXTERIOR MOUNTING ONLY1, 2, 3, 4, 5
24VDC
Notes:1 Refer to manufacturer’s spec sheets for reccomended remote mount distance.2 Due to the rapidly evolving technology for Semiconductor products, Tegan driver options are subject to change at any time, without notice. In addition, if any of the standard drivers are out of stock or discontinued, Tegan Lighting will supply an equal as needed. Tegan can also supply alternative drivers upon request; contact the factory for details. Subject to change.3 Tegan LED emitters, like all LEDs, undergo a natural depreciation in lumen output. This depreciation is within the specifications of LM-80. Extreme ambient temperatures, dusty environments, and power conditions may affect the depreciation. Wattage requirements and lumen output are subject to change with ongoing developments in LED technology.4 Enclosures can be field painted to match the structure or contact the factory for custom colors.5 We have listed the maximum number of Kore-EX5 Modules for each Driver option above based on the following common practice.: Recommended De-Rating: Like all electronic power supplies, life is significantly increased when loads are 75/80% or less of the nominal power capacity. Best life is in climate controlled conditions, or when the power supply stays below 70C. The type of enclosure and ambient environment can affect the operating temperature, and therefore the lifetime of the power supply. For all Tegan Lighting enclosures, load power supplies to only 75/80% of their nominal. These are general suggestions to increase the life of the supply in moderate climates; the actual operating lifetime of the power supply depends on the actual environment and use. Do not operate the power supplies during the day with direct sunlight with extreme hot temperatures.
Power Supplies - Exton System - Exterior Rated - IP24
teganlighting.com • [email protected] • (415) 504-3536 • TG116 8/17 3
Custom Pendant Custom fixture with design featuring
simplicity and elegance
Project Name: Modera LoHi
Model Number: MLH-PEN-24-18-INC
Type:
• Triac Dimming
• 3 Candelabra Base
• Outdoor Wet Located
Model H W D OAH Voltage Watts Dimming Acrylic Finish Lamping
MLH-PEN-24-18-INC 24” 18” 18” TBD 120 25 max
each bulb Triac N/A Standard Powder Coat
3 - Candelabra Base Bulb
APPLICATION NOTE:
Due to the highly customized nature of this fixture, Casey Architectural Lighting, LLC reserves the right to substitute comparable components as necessary to
comply with Intertek’s UL or ETL listing requirements.
8517 Herrington Court, Pevely, Missouri 63028
Phone: 636-543-3235 Fax: 636-634-9998
www.caseyarchitecturallighting.com
Ordering number
Model Color Temp. Acrylic Finish
Electrical: 120 Volts
Installation: Standard J-Box
Lamping: Candelabra Base
Finishing: Standard Powder Coat
This is a conceptual
rendering of the
fixture. Materials
and finishes will
vary based on
customer
specifications.
FIXTURE TYPE:
PROJECT NAME:
Aura I l luminated Wooden Ring Pendant
Solid wood exterior/interior LED round pendant.
FEATURES:• Available in 2' to 6' diameters
• Smooth, dot free illumination
• Dimmable IP65 power supply and IP67 luminaire
• Catenary cable and ceiling mounting options
SPECIFICATIONS:
HOUSING: Solid Accoya wood linear assembled through glulam
construction and precision machined using CNC technology.
Adhesive complies with ASTM D-2559 glulam construction
specifications for extreme exposed weather conditions, waterproof,
and rated for wet or dry use exposure.
ELECTRICAL: Powered by a 100-305V primary/24V DC secondary
remote dimmable power supply. Driver features built-in short circuit,
over temperature, over voltage, and over current. System is 0-10V
dimming down to 8%. Catenary mounted fixtures supplied with 1'
infeed cable. A 40' leader cable supplied with infeed only fixtures.
Ceiling canopy mounted fixtures supplied with 6' infeed cable.
Constructed with a US and Canada UL listed luminaire.
OPTICAL SYSTEM: Available in 2700K, 3000K, 3500K, 4000K color
temperatures with smooth, dot free illumination. Consult factory for
other lumen outputs. Operating temperature of -40°F to 131°F.
FINISHES AND MATERIALS: Wood is finished with a low VOC
waterborne matte exterior finish containing UV and mildew
inhibitors.
HARDWARE: All fasteners and non-wood components are stainless
steel.
WARRANTY: 25-year wood warranty with a 5-year finish warranty.
3-year warranty on LED and driver.
164 © 2017 STRUCTURA INC.
ORDERING GUIDE: EXAMPLE: AURA-RNG-D-6-L27SO-S4-CA-STD
4 Diameter
2 2'3 3'4 4'5 5'6 6'
5 CCT
L27 2700KL30 3000KL35 3500KL40 4000K
D
3 4 7 8
1 Series
AURA Aura
2 Series
RNG Ring
3 Lighting
D Direct
6 Output
SO Standard Output
7 Wood Finish
S* See color options on finishes technical sheet
95
RNG
2 6
AURA
1
8 Mounting
CA Catenary CableCE Ceiling Canopy
9 Special
STD StandardMOD Modified
Aura Ring - Direct Lighting
1. Catenary cable designed and provided by others.2. Weight and EPA based off of catenary mounting option.
0°
90°
180°
Candela - Direct
Diamteter
4"
2"
Exterior Catenary Cable Mounting(1) Exterior and Interior Ceiling Mounting
Stainless Steel Catenary Clamp
Stainless SteelTurnbuckle
Stainless Steel Rod
60" of 1/16" Stainless Steel Cable
Stainless Steel Cable Adjustors
1/4" Barrel FittingJunctionBox Cover
Wet Location
Stainless Steel Rail
Dia.
2'
3'
4'
5'
6'
Watts
23
35
47
58
70
Lumens
720
1120
1480
1840
2240
Weight(2)
17lbs.
25lbs.
32lbs.
41lbs.
47lbs.
EPA(2)
.69ft2
.95ft2
1.24ft2
1.52ft2
1.81ft2
165 © 2017 STRUCTURA INCProduct specification sheets subject to change.
Aura Ring - Direct Lighting
Standard Output Isofootcandle Curve
.05fc.1fc
1fc
AURA-RING-D-2-L35SO Mounted at 10'
5' AURA-RNG-D-3-L35SO Mounted at 10'
.05fc.1fc
1fc
5' AURA-RNG-D-4-L35SO Mounted at 10'
.05fc.1fc
1fc
5'
AURA-RNG-D-5-L35SO Mounted at 10'
.05fc
.1fc
1fc
5' AURA-RNG-D-6-L35SO Mounted at 10'
.05fc.1fc
1fc
5'
167 © 2017 STRUCTURA INCProduct specification sheets subject to change.
415-504-3536
Kore-EX5 IP65 Cable Mount Pendant with Labyrinth Orb ShadeExton Powerspan Cable System
415-504-3536 TG43 6/8/17 • • teganlighting.com [email protected] •
Category: Exton System features Tegan’s exclusive Powerspan Cable. Tensioned or swagged mounting with various Gems, Glass Envelopes and Shades. Designed for use with a remote Power Supply Enclosure with Driver. Optional 0-10V Dimming.
Material: Power Cable: Embedded stainless steel wire in the center of the Custom Cable with 10 gauge conductors inside a IP-65 Self-Sealing Jacket. Mounting: Powdercoated or anodized steel and aluminum. Kore-EX5 LED Module: UV stable exterior anodized aluminum, UV stable polycarbonate glass lenses, rubber O-rings. Gem: 100% machined, clear/frosted acrylic or hand-blown, tooled glass. Labyrinth Shade: 100% Cotton or Hemp with an exterior Coatiing.
Finish: Powerspan Cable: Black (BLK). Custom finishes not available. Kore-EX5 LED Module: Exterior rated, brushed, two-step electrolytic color anodizing. Anodized Black (BLK) or Anodized Aluminum (AL). Gem: Clear/frosted acrylic. Pendant Power Cord: Clear with aluminum Kore-EX5 Module and black with black Kore-EX5 Module. Mounting: Anodized Aluminum or Powder Coat Black.
Power Supply Refer to Exton Power Supply IP20 Specsheet, IP24 Specsheet or IP66 Specsheet for details.Enclosure:
Powerspan Exton Powerspan, Self-Sealing Cable is IP-65 for interior/exterior use. Supplied in 1’ (30.5cm)Cable: increments, with End Cap, as a stand alone to be tensioned or swagged. Field cuttable.
Mounting: Surface Mount 2” Wrap Bracket, Black (EX-SWB-2-BLK), Surface Mount 3” Wrap Bracket, Black (EX-SWB-3-BLK), Vertical Surface Mount Bracket, Black finish (EX-VSB-BLK), Horizontal Surface Mount Bracket, Black finish (EX-HSMB-BLK), Standoff Bracket, Black finish (SOBR-BLK) Surface Mount “Drape” Bracket, Black finish (EX-FSDB-BLK), Tensioning Surface End Bracket, Black finish (EX-TSEB), Tree Strap & Buckle, Black finish (EX-TSB-BLK). Exton End Cap - Black finish (EX-EC-BLK).
Pole Mounting: Tegan has partnered with AV Poles & Lighting. Poles can be ordered from Tegan Lighting. AV is well-versed on the Exton System and has installed many similar tensioned projects. As required, engineering services will be provided in the quote to insure proper structural installation per code requirements. Refer to Exton Application Guide for information and more details. Poles can also be provided by others; engineering is required by others to ensure structural integrity. Note: Tegan will not be responsible for Poles/Engineering provided by others.
Cable Span: Maximum Cable mounting is 110’ (33.5m). Note that the cable must be a continuous run without interruption.
Kore-EX5 LED Kore-EX5 LED Pendant - Anodized Aluminum or Anodized Black finish.Module:
Power Feed: Exton IP-65 Power Feed for Remote Power Supply - Black Finish (EXPF-BLK); Field paintable; contact Factory for custom colors. J-Box by others.
LED: High Wattage Array Cree LED, 2-Step Macadam. 5W @ 500 (estimated; in testing) with 2700K 82-85 CRI typical. All values are initial lumens. For exact lumen output and wattage consumption data, please consult LM79 reports. Online power consumption does not include driver losses. Contact factory for 2400K, 3500K, 4000K or 90 CRI.
Optics: A 15° reflector is supplied in all decorative options to maximize decorative element illumination.
Electrical: 24VDC. Total input watts: 6.5W. 250W max. per circuit.
NEWFeaturing Tegan’s Exclusive
“Powerspan Cable”
415-504-3536
Kore-EX5 IP65 Cable Mount Pendant with Labyrinth Orb ShadeExton Powerspan Cable System
415-504-3536 TG43 6/8/17 • • teganlighting.com [email protected] •
Remote The Exton System is designed for use with a Remote Power Supply Enclosure and Driver. Refer to Power Supply: Exton Power Supply IP20 Specsheet, IP24 Specsheet or IP66 Specsheet for details. Use of Tegan Lighting Power Enclosures and Drivers only. If supplied “by others” the warranty and listing are void.
Gems: Flat Gem, Frosted Cylinder Gem.
Architectural 12” Labyrinth Orb Shade, Natural White Cotton, 12” Labyrinth Orb Shade, Natural Shades: Hemp finish or 12” Labyrinth Orb Shade, Custom Color with Wet Location Coating. Contact the factory for sizes and shapes. Engineering: Due to mathematical laws, tightening and loading any taut end-supported flexible cable puts tensile loads upon its supports (walls, trees, posts, etc.) that is orders of magnitude greater than the weight of the cable and its dynamic loading. Taut installations require extremely strong end supports, and it is up to the specifier and installer to match the strength of the end support structures with the combined level of tautness and static (weight of cable/fixtures) and dynamic (e.g. wind/ice/vermin) load of the cable.
Installation: Refer to Installation Instructions Sheet 23 for details. For system layout, and specification assistance, refer to the Exton Application Guide for details.
Labels: ETL Listed; Tested to UL 2108 Low Voltage Lighting Systems. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on teganlighting.com are the most recent version and supersede all other versions that exist in any other printed or electronic form. Kore-EX5 Module and Powerspan Cable - 3 year warranty. Labyrinth Architectural Shades: limited one year warranty. Refer to Exton Application Guide for details. Consult with an Arborist for proper tree installation per the type of tree(s). Tegan Lighting is not liable for any damage/injury as a result of tree installation. Refer to Installation Instructions Sheet 23 for more details.
250WMAX
0-10VDimming
LED24VDC
IP65
415-504-3536
Kore-EX5 IP65 Cable Mount Pendant with Labyrinth Orb ShadeExton Powerspan Cable System
415-504-3536 TG43 6/8/17 • • teganlighting.com [email protected] •
Exton - Cable - Mounting Brackets
Surface Mount 2” Wrap Bracket, Black (EX-SWB-2-BLK) Surface Mount 3” Wrap Bracket, Black (EX-SWB-3-BLK)Surface Mount Wrap Bracket, 2 3/16” (55.5mm) or 3 3/16” (81mm), for Exton Powerspan Cable mounting to any suitable surface; wall, tree, pole, beam, etc. to continue up to a 110’ (33.5m) run. 250W per run. Available in anodized Black (BLK) finish. Can be field painted or contact factory for custom colors. Refer to Installation Instructions Sheet 23 and Exton Application Guide for details. Refer to page one for mounting Exton Brackets to Pole(s).
Surface Mount Wrap Bracket
ø 2”(50.8mm)
1 1/2”(38mm)
2 3/16”(55.5mm)
Vertical Surface Mount Bracket
15/16”(24mm)
1/2”(12mm)
1 3/8”(35mm)
Vertical Surface Mount Bracket, Black (EX-VSB-BLK)Vertical Surface Mount Bracket for Exton Powerspan Cable can be mounted to any suitable surface; wall, tree, pole, beam, etc. 250W per run, for up to a 110’ run. Available in anodized Black (BLK) finish. Can be field painted or contact factory for custom colors. Refer to Installation Instructions Sheet 23 and Exton Application Guide for details. Refer to page one for mounting Exton Brackets to Pole(s).
Horizontal Surface Mount Bracket, Black (EX-HSMB-BLK)Horizontal Surface Mount Bracket for Exton Powerspan Cable can be mounted to any suitable surface; wall, tree, pole, beam, etc. 250W per run, for up to a 110’ run. Available in anodized Black (BLK). Can be field painted or contact factory for cus-tom colors. Refer to Installation Instructions Sheet 23 and Exton Application Guide for details. Refer to page one for mounting Exton Brackets to Pole(s).
Horizontal Surface Mount Bracket
1/2”(12mm)
1 3/4”(45mm)
ø 2”(50.8mm)
3 3/16”(81mm)
1 1/2”(38mm)
36° 60°
Exton - Powerspan Cable
Exton - Powerspan Cable - Black (EX-C-BLK) Exton Self-Sealing Powerspan Cable is IP-65 for interior/exterior applications. Order in 1’ (30.5cm) increments for up 110’ (33.5m) maximal span. Field cuttable. 24VDC at 250W Max. per run. Available in Black finish (only). Refer to Installation Instruc-tions Sheet 23 and Exton Application Guide for details.
Exton - Powerspan Cable
11/16”(17.5mm)
5/16””(7.3mm)
stainless steel wire
10 guage conductors
Exton End Cap - Black Finish (EX-EC-BLK) Exton End Cap is for interior/exterior applications. One (1) required per run. Available in Black finish (only). Refer to Installation Instructions Sheet 23 and Exton Application Guide for details.
Exton - End Cap
3/8”(55.5mm)
5/8”(55.5mm)
415-504-3536
Kore-EX5 IP65 Cable Mount Pendant with Labyrinth Orb ShadeExton Powerspan Cable System
415-504-3536 TG43 6/8/17 • • teganlighting.com [email protected] •
Exton - Cable - Power Feed
Exton IP-65 Power Feed for Remote Power Supply (EX-PF-BLK) The IP-65 Power Feed will allow the Exton Power Cable to be feed into a building or Pole for connection to a Remote Power Supply. The Power Feed is not structural. It is for feeding wire (only) into a building, pole, etc. to make an electrical connection. It can not be used for tensioning. Field-paintable. Can mount to a building structure or pole. Available in Black (BLK) finish. Contact factory for custom colors. Tensioning Bracket shown is ordered separately. Remote Power Supply; refer to Specification Sheet 24 for options. Refer to Installation Instructions Sheet 23 and Exton Application Guide for details.
5”(127mm)
5”(127mm) 3 -1/2”
(89mm)
Exton IP-65 Power Feed for Remote Power Supply
4”(102mm)
Tree Strap & Buckle (EX-TSB) Tree Strap & Buckle Bracket for Exton Powerspan Cable mounting to a tree. 1500 lb. test, UV-resistant, water-resistant. Field-cuttable. 10’ (3m) long; contact factory for alternative strap lengths longer than 10’ in 1’ increments. Available in Black (BLK) finish (only). Galvanized Stainless Steel buckle. Tensioning Bracket shown is ordered separately. Refer to Installation Instructions Sheet 23 and Exton Application Guide for details.
Tree Strap & Buckle120” (3m) long
x 1” (25.4mm) wide
1” (25.4mm)Stainless Steel Cam
Buckle
Exton - Cable - Mounting Brackets
Tensioning Surface End Bracket, Black (EX-TSEB-BLK) Tensioning Surface End Bracket for Exton Powerspan Cable installations. Can be mounted to any suitable surface; wall, tree, pole, beam, etc. 25° Horizontal side adjustment. Two Tensioning brackets required per tensioned run. Brackets can be installed side-by-side for multiple runs. 250W per run. Available in anodized Black (BLK) finish. Can be field painted or contact factory for custom colors. Refer to Installation Instructions Sheet 23 and Exton Application Guide for details.
4 -3/8”(111mm)
1 -13/16”(46mm)
2 -7/16”(46mm)
Standoff Bracket, Black (EX-SOBR-BLK)Spacer to be used with Vertical or Horizontal Surface Mount Brackets to allow room for the EX5 module and the cable clamp when the module is positioned nearby the mounting surface. Available in Black (BLK). Refer to Installation Instruc-tions Sheet 23 and Exton Application Guide for details.
Standoff Bracket
1 -13/16”(46mm)
11/16”(18mm)
CA
BLE
NO
N-T
ENSI
ON
ING
DRA
PE O
PTIO
NS
11/16”(18mm)11/16”
(18mm)
Standoff Bracket
Standoff Bracket
Ceiling
Wall
Flexible Surface Mount “Drape” Bracket, Black (EX-FSDB-BLK) Flexible Surface Mount Bracket for “draped” Exton Powerspan Cable installations. Can mount to any suitable surface; wall, tree, pole, beam, etc. 250W per run. 4.25” (115mm) long; can be made to specified length (not cuttable). Stainless steel and Black anodized aluminum. Refer to Installation Instructions Sheet 23 and Exton Ap-plication Guide for details. Refer to page one for mounting Exton Brackets to Pole(s).
Flexible Surface Mount “Drape” Bracket
1 -3/8”(34mm)
4 -1/4”(134mm)
415-504-3536
Kore-EX5 IP65 Cable Mount Pendant with Labyrinth Orb ShadeExton Powerspan Cable System
415-504-3536 TG43 6/8/17 • • teganlighting.com [email protected] •
Kore-EX5 LED Pendant, Cable Mount, Flat Gem, Labyrinth Orb Shade
(EX5-K-PX-C-FG-AL-LO-NC/NH/CC) (EX5-K-PX-C-FG-BLK-LO-NC/NH/CC)Kore-EX5: Aluminum or Black Finish; Labyrinth Shade: Natural Cotton/Natural Hemp/Custom Color
ø 12 1/8”(308mm)
14’(4.3m)
14 3/4”(375mm)
1. Order Power Supplies separately. Refer to Exton Power Supply IP20 Specsheet, IP24 Specsheet or IP66 Specsheet for options. 2. 24VDC Operation.3. Power Cord is factory cut (X) to 1’ (.3m) up to 14.5’ (4.5m). Specify desired length, not field cuttable. Contact factory for longer lengths.
Exton - Kore-EX5 - “Gem” Types
ø 1 -5/8”(41mm)
Exton Flat Gem - Frosted Acrylic Flat Gem for Kore-EX5. Frosted interior.
Exton Cylinder Gem - Frosted Acrylic Cylinder Gem for Kore-EX5. Frosted interior with clear lower third.
ø 1 -5/8”(41mm)
2 -1/2”(64mm)
7/16”(11mm)
1. Contact factory for a custom design gem.
Exton - Kore-EX5- Architectural Shade - Woven Type12” Labyrinth Orb Shade, Natural White Cotton
12” Diameter. Hand-Woven, 100% Natural White Cotton, Natural Hemp or Custom Color Shade. Exterior rated coating. Contact factory for custom colors, sizes and shapes. See page 1 for warranty.
ø 12 1/8”(308mm)
12” Labyrinth Orb Shade, Natural Hemp
12” Labyrinth Orb Shade, Custom Color
415-504-3536
Kore-EX5 IP65 Cable Mount Pendant with Labyrinth Orb ShadeExton Powerspan Cable System
415-504-3536 TG43 6/8/17 • • teganlighting.com [email protected] •
Kore-EX5 LED Pendant, Cable Mount, Frosted Cylinder Gem, Labyrinth Orb Shade
(EX5-K-PX-C-FCG-AL-LO-NC/NH/CC) (EX5-K-PX-C-FCG-BLK-LO-NC/NH/CC)Kore-EX5: Aluminum or Black Finish; Labyrinth Shade: Natural Cotton/Natural Hemp/Custom Color
ø 12 1/8”(308mm)
14’(4.3m)
14 3/4”(375mm)
12” Labyrinth Orb Shade, Natural Cotton
1. Order Power Supplies separately. Refer to Exton Power Supply IP20 Specsheet, IP24 Specsheet or IP66 Specsheet for options. 2. 24VDC Operation.3. Power Cord is factory cut (X) to 1’ (.3m) up to 14.5’ (4.5m). Specify desired length, not field cuttable. Contact factory for longer lengths.
415-504-3536 TG43 4/19/17 • • teganlighting.com [email protected] •
Click on the linked images below to visit the Exton Gallery.
Kore-EX5 LED Pendant, Cable Mount, Black,Frosted Cylinder Gem, Labyrinth Orb Shade,
Natural Hemp
Kore-EX5 LED Pendant, Cable Mount, Black,Frosted Cylinder Gem, Labyrinth Orb Shade,
Custom Color
Kore-EX5 LED Pendant, Cable Mount, Black,Frosted Cylinder Gem, Labyrinth Orb Shade,
Natural Cotton
Tegan’s Exton Application Guide features installation examples with complete BOM! Click on the linked image below.
Category: Tegan Lighting offers a wide variety of 24VDC drivers that are compatible with Exton Monopoints and Systems for various layouts. Specify 0-10V dimming controls with dimming LED drivers. Refer to the linked driver specification sheets in the chart on page 3 for details.
Exterior IP24Enclosures: Exterior Mount Large Remote Power Supply Enclosure - Exterior - IP24 (LRPSE-EX-IP24). Remote mounting the power supplies provide a clean minimalist aesthetic. Wet Listed Nema 3R enclosure protects power supply from rain, snow, and ice outdoors. Bottom mounted KOs allow attachment to supply power, as well as to Kore-EX Powerspan Cable. It should be installed in an outdoor location not subject to washdowns or within a few feet of a sprinkler head. Material: Steel.
Finish: “ANSI 61 Grey” finish. Enclosures can be field painted to match the structure or contact the factory for custom colors.
Systems: Exton Monopoint, Exton Cable. Remote Power Supplies are required for all Exton Cable and Trac systems. Refer to linked Specsheets and Installation Sheets for system details..
Drivers: Refer to pp. 2-3 for details. Exton Systems can only be used with Tegan Lighting’s Power Supply Enclosures and Driver(s). Exton Systems can only be used with Tegan Lighting’s Power Supply Enclosures and Driver(s). Any substitution “by others” will void the warranty and listing. Refer to notes under power supply charts regarding derating recommendations.
LED Modules: Kore-EX5. Total Input Power 6.5W.
Installation: Electrical contractor to connect electrical wire from the transformer to the system power feed utilizing the correct gauge to provide the proper voltage at the Systems/Monopoints per local standards and codes. The wire gauge used to supply power to the Systems/ Monopoints should be sized according to the distance between the transformer and the Systems/Monopoints. Enclosure and power supply are provided as a kit. Refer to Exton Cable Installation Instructions #23 and Exton Monopoint Installation Instructions #24 for details. Refer to Exton Application Guide for layout and specification assistance.
Labels: IP24 Enclosure - Exterior Listed. - UL-50 Type 3R, CSA Type 3R, Complies with Nema Type 3R & IEC 60529, IP24.
Refer to linked Power Supply Specsheets on the following pages for Manufacturer’s listing. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on teganlighting.com are the most recent version and supersede all other versions that exist in any other printed or electronic form.
24VDCPower Supplies - Exton System - Exterior Rated - IP24
teganlighting.com • [email protected] • (415) 504-3536 • TG116 8/17 1
LED24VDC
WLIP24
Power Supply Enclosure - IP24 EXTERIOR MOUNTING 1, 2, 3, 4, 5
Wet Listed IP24 Nema 3R enclosure protects power supply from rain, snow, and ice outdoors. Bottom mounted KOs allow attachment to supply power, as well as to Kore-EX Power Span Cable. It should be installed in a relatively protected outdoor location not subject to washdowns or within a few feet of a sprinkler head. “ANSI 61 Grey” finish (GY). Enclosure ships with the Driver(s) installed.
Large Remote Power Supply IP24 Enclosure
24VDC
40W - Will operate 4 Kore-EX5 Modules 40W Non-Dimming Driver (D-40W-120/277V-IP24-LRPSE-GY) 40W 0-10V Dimming Driver (D-DM-40W-120/277V-IP24-LRPSE-GY)
60W - Will operate 7 Kore-EX5 Modules 60W Non-Dimming Driver (D-60W-120/277V-IP24-LRPSE-GY) 60W 0-10V Dimming Driver (D-DM-60W-120/277V-IP24-LRPSE-GY)
100W - Will operate 11 Kore-EX5 Modules
100W Non-Dimming Driver (D-100W-120/277V-IP24-LRPSE-GY) 100W 0-10V Dimming Driver (D-DM-100W-120/277V-IP24-LRPSE-GY)
150W - Will operate 17 Kore-EX5 Modules 150W Non-Dimming Driver (D-150W-120/277V-IP24-LRPSE-GY) 150W 0-10V Dimming Driver (D-DM-150W-120/277V-IP24-LRPSE-GY)
240W - Will operate 27 Kore-EX5 Modules 240W Non-Dimming Driver (D-240W-120/277V-IP24-LRPSE-GY) 240W 0-10V Dimming Driver (D-DM-240W-120/277V-IP24-LRPSE-GY)
320W - Will operate 36 (Non-Dimming) Kore-EX5 Modules 320W Non-Dimming Driver (D-320W-120/277V-IP24-LRPSE-GY) 288W - Will operate 32 Kore-EX5 Modules 288W 0-10V Dimming Driver (D-DM-288W-120/277V-IP20-LRPSE-GY)
Notes:1 Exton System, Monopoints and LED Modules are specified separately. Refer to the linked Specification Sheets on p. 1 for more detail.2 See tables on p. 3 for Power Supply links. 3 Due to the rapidly evolving technology for semiconductor products, Tegan driver options are subject to change at any time, without notice. In addition, if any of the standard drivers are out of stock or discontinued, Tegan Lighting will supply an equal as needed. Tegan can also supply alternative drivers upon request; contact the factory for details.4 Enclosures can be field painted to match the structure or contact the factory for custom colors.5 We have listed the maximum number of Kore-EX5 Modules for each Driver option above based on the following common practice.: Recommended De-Rating: Like all electronic power supplies, life is significantly increased when loads are 75/80% or less of the nominal power capacity. Best life is in climate controlled conditions, or when the power supply stays below 70C. The type of enclosure and ambient environment can affect the operating temperature, and therefore the lifetime of the power supply. For all Tegan Lighting enclosures, load power supplies to only 75/80% of their nominal. These are general suggestions to increase the life of the supply in moderate climates; the actual operating lifetime of the power supply depends on the actual environment and use. Do not operate the power supplies during the day with direct sunlight with extreme hot temperatures.
4 -3/16” (107mm)
12 -1/8” (308mm)
8 -1/2” (126mm)
Power Supplies - Exton System - Exterior Rated - IP24
teganlighting.com • [email protected] • (415) 504-3536 • TG116 8/17 2
Description Max # of Kore-EX5 Fixtures
Catalog # Watts1 Min / Max3 Tegan Enclosure Size
Exterior Enclosure
LinksTypical Driver Links
40W Non-Dimming Driver 4 D-40W-120/277V-IP24-LRPSE-GY 40W 1W / 30W
Large12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure 40W Non-Dimming Driver
40W 0-10V Dimming Driver 4 D-4M-60W-120/277V-IP24-LRPSE-GY 40W 1W / 30W
Large12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure
40W Driver & Dimming Module
60W Non-Dimming Driver 7 D-60W-120/277V-IP24-LRPSE-GY 60W 1W / 49W
Large12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure 60W Non-Dimming Driver
60W 0-10V Dimming Driver 7 D-DM-60W-120/277V-IP24-LRPSE-GY 60W 1W / 49W
Large12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure
60W Driver& Dimming Module
100W Non-Dimming Driver 11 D-100W-120/277V-IP24-LRPSE-GY 100W 1W / 77W
Large12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure 100W Non-Dimming Driver
100W 0-10V Dimming Driver 11 D-DM-100W-120/277V-IP24-LRPSE-GY 100W 1W / 77W
Large 12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure
100W Driver& Dimming Module
150W Non-Dimming Driver 17 D-150W-120/277V-IP24-LRPSE-GY 150W 1W / 119W
Large 12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure 150W Non-Dimming Driver
150W 0-10V Dimming Driver 17 D-DM-150W-120/277V-IP24-LRPSE-GY 150W 1W / 119W
Large 12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure
150W Driver& Dimming Module
240W Non-Dimming Driver 27 D-240W-120/277V-IP24-LRPSE-GY 240W 1W / 189W
Large 12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure 240W Non-Dimming Driver
240W 0-10V Dimming Driver 27 D-DM-240W-120/277V-IP24-LRPSE-GY 240W 1W / 189W
Large 12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure
240W Driver& Dimming Module
320W Non-Dimming Driver 36 D-320W-120/277V-IP24-LRPSE-GY 320W 1W / 252W
Large 12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure 320W Non-Dimming Driver
288W 0-10V Dimming Driver 32 D-DM-288W-120/277V-IP24-LRPSE-GY 288W 1W / 230W
Large 12-1/8” H x 8-1/2” W x
4-3/16” D
IP24Enclosure
320W Driver& 288W Dimming Module
24VDC Power Supplies - LED Drivers - IP24 EXTERIOR MOUNTING ONLY1, 2, 3, 4, 5
24VDC
Notes:1 Refer to manufacturer’s spec sheets for reccomended remote mount distance.2 Due to the rapidly evolving technology for Semiconductor products, Tegan driver options are subject to change at any time, without notice. In addition, if any of the standard drivers are out of stock or discontinued, Tegan Lighting will supply an equal as needed. Tegan can also supply alternative drivers upon request; contact the factory for details. Subject to change.3 Tegan LED emitters, like all LEDs, undergo a natural depreciation in lumen output. This depreciation is within the specifications of LM-80. Extreme ambient temperatures, dusty environments, and power conditions may affect the depreciation. Wattage requirements and lumen output are subject to change with ongoing developments in LED technology.4 Enclosures can be field painted to match the structure or contact the factory for custom colors.5 We have listed the maximum number of Kore-EX5 Modules for each Driver option above based on the following common practice.: Recommended De-Rating: Like all electronic power supplies, life is significantly increased when loads are 75/80% or less of the nominal power capacity. Best life is in climate controlled conditions, or when the power supply stays below 70C. The type of enclosure and ambient environment can affect the operating temperature, and therefore the lifetime of the power supply. For all Tegan Lighting enclosures, load power supplies to only 75/80% of their nominal. These are general suggestions to increase the life of the supply in moderate climates; the actual operating lifetime of the power supply depends on the actual environment and use. Do not operate the power supplies during the day with direct sunlight with extreme hot temperatures.
Power Supplies - Exton System - Exterior Rated - IP24
teganlighting.com • [email protected] • (415) 504-3536 • TG116 8/17 3
Lamp A B C
33 065 8.4W LED 13 47⁄8 4
Recessed wall luminaires with directed light
Type:BEGA Product:
Project:Voltage:
Color:Options:
Modified:
BEGA-US 1000 BEGA Way, Carpinteria, CA 93013 (805) 684-0533 FAX (805) 566-9474 www.bega-us .com ©copyright BEGA-US 2016 Updated 02/16
A
B
C
Housing: Constructed of die-cast and extruded aluminum components with integral wiring compartment. Mounting tabs provided. Die castings are marine grade, copper free (≤ 0.3% copper content) A360.0 aluminum alloy.
Enclosure: One piece die-cast aluminum faceplate. Clear tempered glass; .125" thick, machined flush to faceplate surface. Faceplate is secured by four (4) flush, socket head, stainless steel captive screws threaded into stainless steel inserts in the housing casting. Pure anodized aluminum asymmetrical reflector. Continuous high temperature, molded silicone rubber gasket for weather tight operation.
Electrical: 8.4W LED luminaire, 10.2 total system watts, -20°C start temperature. Integral 120V through 277V electronic LED driver, 0-10V dimming. LED module(s) are available from factory for easy replacement. Standard LED color temperature is 3000K with a >80 CRI. Available in 4000K (>80 CRI); add suffix K4 to order.
Note: LEDs supplied with luminaire. Due to the dynamic nature of LED technology, LED luminaire data on this sheet is subject to change at the discretion of BEGA-US. For the most current technical data, please refer to www.bega-us.com.
Finish: All BEGA standard finishes are polyester powder coat with minimum 3 mil thickness. Available in four standard BEGA colors: Black (BLK); White (WHT); Bronze (BRZ); Silver (SLV). To specify, add appropriate suffix to catalog number. Custom colors supplied on special order.
UL listed for US and Canadian Standards, suitable for wet locations and for installation within 3 feet of ground. Type non-IC. Protection class: IP65.
Specification Sheet / In-grade / L300
All technical information in this document is subject to change. Copyright © MP Lighting.www.mplighting.com t 1.877.708.1184 f 604.708.1185 09-2017
Code Wattage Color Beam Lens (Option) Angle Bracket* Input Voltage Flange Height Base Height Finish
L300 - -
1 = 1W 2 = 2.5W
W22S = 2200K, 80+CRI W27S = 2700K, 80+CRIW30S = 3000K, 80+CRIW35S = 3500K, 80+CRIW41S = 4100K, 80+CRIW27H = 2700K, 90+CRIW30H = 3000K, 90+CRIW35H = 3500K, 90+CRI
*W20S only for AC
S = spot (12°)N = narrow flood
(30°)W= wide flood
(120°)
C = clearF = frosted
See below
(Option)LM = louver, matte anodizedLB = louver, black anodizedHM = hex louver, matte anodizedHB = hex louver, black anodized* Louver cannot be used with Angle Bracket.
0 = no angle 20 = 20° angle X = custom
(20° max.)
* Max. 20° angle bracket without louver option.
D = DCA = 12V AC*12V AC not available for W22S/W41S & high CRI
S = standard flange 7/8” (22mm)
P = paving stone flange, 3-3/8” (86mm)
X = separate custom rectan-gular boxes (SGB2-S6, SGB,SFD)
0 = no base2 = 2” (51mm)6 = 6” (152mm)
MA = matte clear anodizedBA = black anodizedBZ= bronze anodizedS6 = stainless steel 316
Type:
Project:
Modified:
Quantity:
Notes:
L300Application Exterior/interior directional in-grade luminaire for lighting
walls, columns, architectural features or landscape features. Applicable for mounting into floors, walls, ceilings or other surfaces where a non-obtrusive luminaire is required.
IP Rating 66
Mounting Comes with splice box, aluminum flange and level gauge. Can be buried in earth/gravel or cast into concrete/paving stone with or without mounting base. Designed to be cast into concrete or inserted into paving stone. Includes 6” wire lead. Can be mounted with MK1 and MK2 (consult with factory). Can be used with Single Gang Box 2 (not included, can be purchased directly from MP Factory)
Electrical Powered by remote dimmable/ non-dimmable driver (sold separately).
*See website for recommended drivers *Remote emergency driver / inverter options available Consult factory.
Power Consumption
1.5 Watt (at 350 mA, 1.0 Watt)
3.0 Watt (at 700 mA, 2.5 Watt)
Light Output 1.0 Watt, 29~33lm2.5 Watt, 47~53lm*For photometric data, see page 03
Warranty 5 years limited warrantyEstimated useful life of LED is 50,000 hours.
Material Solid anodized aluminum or stainless steel (316) with tempered glass lens, RoHS compliant.
Weight 1.8lbs (0.816kg) base extra
Approval
Order Guide
Example: L300-1-W22S-N-C-LM-0-D-S-0-S6
**please go to page 2 & 3 for more info on custom boxes
DISCLAIMER - When using a control system, consult dimming system manufacturer with minimum load before installing 12V AC transformer. Malfunction and damage to product due to improper dimming system installation or misuse will not be covered under warranty. Only DC Drivers are recommended for dimming systems. Consult MP Lighting for recommended drivers.
*MP Lighting reserves the right, at its sole discretion, at any time and without notice, to make design changes to any of our products.
Specification Sheet / In-grade / L300
All technical information in this document is subject to change. Copyright © MP Lighting. 08-2017www.mplighting.com t 1.877.708.1184 f 604.708.1185
pavingstone
sand
Paving stoneflange3-5/8” (92mm)5-1/2”
140mm
Shown with standard flange (S)
Wall mount
Base Height
Ø1-5/8”Ø41mm
Ø4-1/8”Ø105mm
1/4”6mm
2”51mm
Standard flange7/8” (22mm)
Ø2-1/2”Ø64mm
Concrete pouring line
4-7/8”124mm
2-3/4”70mm
Splice box with 1/2 NPT I/O ports for connector and wiring.
1-1/4”32mm
1/4”6mm
2”51mm
Ø2-1/2”Ø64mm
Concrete pouring line
1-1/4”32mm
Ø6-1/2”Ø165mm
Ø1-7/8”Ø49mm
2-7/8”72mm
Base Height
Ø6-1/2”Ø165mm
Base Height
Ø1-5/8”Ø41mm
Ø4-1/8”Ø105mm
1/4”6mm
2”51mm
Standard flange7/8” (22mm)
Ø2-1/2”Ø64mm
Concrete pouring line
4-7/8”124mm
2-3/4”70mm
Splice box with 1/2 NPT I/O ports for connector and wiring.
1-1/4”32mm
1/4”6mm
2”51mm
Ø2-1/2”Ø64mm
Concrete pouring line
1-1/4”32mm
Ø6-1/2”Ø165mm
Ø1-7/8”Ø49mm
2-7/8”72mm
Base Height
Ø6-1/2”Ø165mm
pavingstone
sand
Paving stoneflange3-3/8” (86mm)5-1/2”
140mm
Base Height
Ø1-5/8”Ø41mm
1/4”6mm
Standard flange7/8” (22mm)
3/4” NPT
Ø2-3/16”Ø56mm
Concrete pouring line
Concrete
4-7/8”124mm
2-7/8”72mm
Ø4-1/8”Ø105mm
1-13/16”45.6mm
Tile
Ø1-5/8”Ø41mm
1-3/4”45.6mm
3/4” NPT
Ø2-3/16”Ø56mm
trim 1/8”
4-7/8”124mm
3”76mm
Ø4-1/8”Ø105mm
please pour concreteapprox. 6mm abovetop of flange
Base Height
Base Height
Ø6-1/2”Ø165mm
Shown with EBX1-LED01-OCLA and MK2 Mounting kit
Standard flange with standard base Shown with paving stone flange (P) with no base.
DIMENSION:
sand
Base Height
Ø4-1/8”Ø105mm
1/4”6mm
2”51mm
Standard flange7/8” (22mm)
Ø2-1/2”Ø64mm
Ø1-5/8”Ø41mm
Concrete pouring line
4-7/8”124mm
2-3/4”70mm
Splice box with 1/2 NPT I/O ports for connector and wiring.
pavingstone
Paving stoneflange3-3/8”86mm
5-1/2”140mm sand
Base Height
Ø4-1/8”Ø105mm
1/4”6mm
2”51mm
Standard flange7/8” (22mm)
Ø2-1/2”Ø64mm
Ø1-5/8”Ø41mm
Concrete pouring line
4-7/8”124mm
2-3/4”70mm
Splice box with 1/2 NPT I/O ports for connector and wiring.
pavingstone
Paving stoneflange3-3/8”86mm
5-1/2”140mm
SEPARATE CUSTOM RECTANGULAR BOXES ORDER GUIDE:
Code custom boxes & flange flange height
EBX - L01
SGB2= MPLIGHTING Single gang box 2 , 4-1/4”(107mm)SGB= Single gang box Iberville BCMBD1-K, 4-3/4”(122mm)SFD= Scepter FD, 4-1/4”(107mm)
S = standardP = paving stone flange, 3-3/8”
(86mm)
Single Gang Box 2 (SGB2-S6)*Please contact and consult with MP Factory to purchase.
A-A ( 1 : 4 )
A
A
70 mm2 3/4 in
116
mm
4 1/
2 in
83 m
m3
1/4
in
107
mm
4 1/
4 in
74 m
m2
7/8
in
66 mm2 5/8 in
49 mm1 7/8 in
111 mm4 3/8 in
83 mm3 1/4 in
116 mm4 1/2 in
A-A ( 1 : 4 )
A
A
70 mm2 3/4 in
116
mm
4 1/
2 in
83 m
m3
1/4
in
107
mm
4 1/
4 in
74 m
m2
7/8
in
66 mm2 5/8 in
49 mm1 7/8 in
111 mm4 3/8 in
83 mm3 1/4 in
116 mm4 1/2 in
A-A ( 1 : 4 )
A
A
70 mm2 3/4 in
116
mm
4 1/
2 in
83 m
m3
1/4
in
107
mm
4 1/
4 in
74 m
m2
7/8
in
66 mm2 5/8 in
49 mm1 7/8 in
111 mm4 3/8 in
83 mm3 1/4 in
116 mm4 1/2 in
CUSTOM BOXES:
Specification Sheet / In-grade / L300
All technical information in this document is subject to change. Copyright © MP Lighting. 08-2017www.mplighting.com t 1.877.708.1184 f 604.708.1185
12° (Spot Beam), Clear lens, Matte clear anodized
30° (Narrow Flood Beam), Clear lens, Matte clear anodized
120° (Wide Flood Beam), Clear lens, Matte clear anodized
1Watt
LIGHT DISTRIBUTION:
A-A ( 1 : 4 )
A
A
83 mm3 1/4 in
116 mm4 1/2 in
133 mm5 1/4 in
107 mm4 1/4 in 74 mm
2 7/8 in
6 mm1/4 in
70 mm2 3/4 in
49 mm1 7/8 in
49 mm1 7/8 in
83 mm3 1/4 in
133 mm5 1/4 in
116 mm4 1/2 in
107 mm4 1/4 in 74 mm
2 7/8 in
70 mm2 3/4 in
A-A ( 1 : 4 )
A
A
83 mm3 1/4 in
116 mm4 1/2 in
133 mm5 1/4 in
107 mm4 1/4 in 74 mm
2 7/8 in
6 mm1/4 in
70 mm2 3/4 in
49 mm1 7/8 in
49 mm1 7/8 in
83 mm3 1/4 in
133 mm5 1/4 in
116 mm4 1/2 in
107 mm4 1/4 in 74 mm
2 7/8 in
70 mm2 3/4 in
A-A ( 1 : 4 )
A
A
83 mm3 1/4 in
116 mm4 1/2 in
133 mm5 1/4 in
107 mm4 1/4 in 74 mm
2 7/8 in
6 mm1/4 in
70 mm2 3/4 in
49 mm1 7/8 in
49 mm1 7/8 in
83 mm3 1/4 in
133 mm5 1/4 in
116 mm4 1/2 in
107 mm4 1/4 in 74 mm
2 7/8 in
70 mm2 3/4 in
D-D ( 1 : 4 )
D
D
116
mm
4 1/
2 in
83 m
m3
1/4
in70 mm2 3/4 in
122
mm
4 3/
4 in
89 m
m3
1/2
in
51 mm2 in
49 mm1 7/8 in
51 mm2 in
122
mm
4 3/
4 in
89 m
m3
1/2
in
49 mm1 7/8 in
83 mm3 1/4 in
116 mm4 1/2 in
95 mm3 3/4 in
D-D ( 1 : 4 )
D
D11
6 m
m4
1/2
in
83 m
m3
1/4
in
70 mm2 3/4 in
122
mm
4 3/
4 in
89 m
m3
1/2
in
51 mm2 in
49 mm1 7/8 in
51 mm2 in
122
mm
4 3/
4 in
89 m
m3
1/2
in
49 mm1 7/8 in
83 mm3 1/4 in
116 mm4 1/2 in
95 mm3 3/4 in
D-D ( 1 : 4 )
D
D
116
mm
4 1/
2 in
83 m
m3
1/4
in
70 mm2 3/4 in
122
mm
4 3/
4 in
89 m
m3
1/2
in
51 mm2 in
49 mm1 7/8 in
51 mm2 in
122
mm
4 3/
4 in
89 m
m3
1/2
in
49 mm1 7/8 in
83 mm3 1/4 in
116 mm4 1/2 in
95 mm3 3/4 in
Single Gang Box 1 (Iberville BCMBD1-K)
Scepter Box (Scepter FD)
Specification Sheet / In-grade / L300
All technical information in this document is subject to change. Copyright © MP Lighting. 08-2017www.mplighting.com t 1.877.708.1184 f 604.708.1185
PHOTOMETRIC DATA:
1W, 3000K, Clear lens 2.5W, 3000K, Clear lens
0° Spread: 21.6° 90° Spread: 20.1°
3.4’ (1.04m)
2.9’ (884m)
2.3’ (701mm)
1.7’ (518mm)
1.1’ (335mm)
0.6’ (183mm)
3.2’ (975mm)
2.7’ (823mm)
2.2’ (671mm)
1.6’ (487mm)
1.1’ (336mm)
0.5’ (152mm) 66.1
16.5
7.34
4.13
2.64
1.84
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
approx. 166 cdmax.
0°
180°
90°
45°-45°
-90°
Polar Candela DistributionL30012°, 80+ CRISpot Beam3000K33 lm
Illuminance at a Distance
approx. 269 cdmax.
0°
180°
90°
45°-45°
-90°
Polar Candela DistributionL3002.5W, 80+ CRISpot Beam3000K53.2 lm
Illuminance at a Distance
0° Spread: 21.5° 90° Spread: 20.1°
3.4’ (1.04m)
2.9’ (884m)
2.3’ (701mm)
1.7’ (518mm)
1.1’ (335mm)
0.6’ (183mm)
3.2’ (975mm)
2.7’ (823mm)
2.2’ (671mm)
1.6’ (487mm)
1.1’ (336mm)
0.5’ (152mm) 107
26.8
11.9
6.71
4.29
2.98
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
approx. 194 cdmax.
0°
180°
90°
45°-45°
-90°
Polar Candela DistributionL3002.5W, 80+ CRILinear Beam2700K52.4 lm
Illuminance at a Distance
0° Spread: 30.0° 90° Spread: 24.5°
4.8’ (1.46m)
4.0’ (1.22m)
3.2’ (975mm)
2.4’ (732mm)
1.6’ (487mm)
0.8’ (244mm)
3.8’ (1.16m)
3.2’ (975mm)
2.6’ (792mm)
1.9’ (579mm)
1.3’ (396mm)
0.6’ (183mm) 74.4
18.6
8.27
4.65
2.98
2.07
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
approx. 42 cdmax.
0°
180°
90°
45°-45°
-90°
Polar Candela DistributionL3002.5W, 80+ CRIWide Beam3000K47.2 lm
Illuminance at a Distance
16.1’ (4.91m)
13.4’ (4.08m)
10.7’ (3.26m)
8.0’ (2.4mm)
5.4’ (1.65m)
2.7’ (823mm)
7.4’ (2.26mm)
6.1’ (1.86m)
4.9’ (1.49m)
3.7’ (1.13m)
2.5’ (762mm)
1.2’ (366mm) 9.90
2.47
1.10
0.62
0.40
0.27
0° Spread: 83.6° 90° Spread: 44.4°
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
approx. 120 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.9° 90° Spread: 24.1°
4.8’ (1.46m)
4.0’ (1.22m)
3.2’ (975mm)
2.4’ (732mm)
1.6’ (487mm)
0.8’ (244mm)
3.8’ (1.16m)
3.2’ (975mm)
2.6’ (792mm)
1.9’ (579mm)
1.3’ (396mm)
0.6’ (183mm) 45
11.3
5.04
2.83
1.81
1.26
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
Polar Candela DistributionL30030°, 80+ CRILinear Beam2700K33 lm
Illuminance at a Distance
approx. 26 cdmax.
0°
180°
90°
45°-45°
-90°
16.1’ (4.91m)
13.4’ (4.08m)
10.7’ (3.26m)
8.0’ (2.4mm)
5.4’ (1.65m)
2.7’ (823mm)
7.4’ (2.26mm)
6.1’ (1.86m)
4.9’ (1.49m)
3.7’ (1.13m)
2.5’ (762mm)
1.2’ (366mm) 6.13
1.53
0.68
0.38
0.25
0.17
Polar Candela DistributionL3000°, 80+ CRIWide Beam3000K29 lm
Illuminance at a Distance
0° Spread: 83.6° 90° Spread: 44.4°
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
Lumen: 33lm, Spot beam (12°) Lumen: 53.2lm, Spot beam (12°)
Lumen: 33lm, Narrow flood beam (30°) Lumen: 52.4lm, Narrow flood beam (30°)
Lumen: 29lm, Wide beam (120°) Lumen: 47.2m,Wide beam (120°)
Polar Candela Distribution Polar Candela DistributionIlluminance at a Distance Illuminance at a Distance
12° (Spot Beam), Clear lens, Matte clear anodized
30° (Narrow Flood Beam), Clear lens, Matte clear anodized
120° (Wide Flood Beam), Clear lens, Matte clear anodized
2.5Watt
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
1
Rev. 06/23/15STEP13_9LONG© 2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be covered
by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Project:
Qty:
SPECIFICATIONSType:
9-LONG
STEP
STEP 13
GREEN CMYK:C - 50M - 0Y - 100K - 25
GREY CMYK:C - 0M - 0Y - 0K - 50
GREY RGB:R - 147G - 149B - 152
GREEN RGB:R - 109G - 157B - 49
BLACK CMYK:C - 0M - 0Y - 0K - 100
BLACK RGB:R - 35G - 31B - 32
WHITE CMYK:C - 0M - 0Y - 0K - 0
WHITE RGB:R - 255G - 255B - 255
colorAccepted color combinations
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
ConstructionDie-cast housing with solid aluminum, brass, or stainless steel faceplate. Step13-9 is a surface mount step light that mounts over a Steel City 2-1/8” deep, rectangular box H4BD or equivalent (by others). Interior option faceplate mounts with no visible fasteners.
SourceLight source consists of six powerful LEDs available in five white color temperatures and six colored LED choices.
OpticsA concealed optic provides a long light distribution for illumination of large areas.
ElectricalIntegral electronic drivers are multi volt input 120-277V, and available in standard or 0-10V dimming. Non-dimming units consume 8.04W. Dimming units consume 18W.
EnvironmentETL / cETL listed dry location or optional wet location.
FinishRecessed surfaces have a ribbed design with matte black finish to reduce glare. Faceplates are available in five metal finishes with protective clear coat or one of seven polyester powder coat painted finishes. A primer only finish is also available for field painting.
Warranty5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user environment and application.All values are design or typical values, measured under laboratory conditions at 25 °C.Assembled in America (Buy American Act Compliant)
STEP13 INT 9LONG L LST2A WHT30K MVOLT BA
Series Environment Length Distribution Source Color Temperature
STEP13 Step 13 WL Wet LocationINT Interior
9LONG 9 inch nominal length L Long LST2A LED Step 2 WHT27K White (27K)WHT30K White (30K)WHT35K White (35K)WHT40K White (40K)WHT50K White (50K)AMB Amber
BLU BlueGRN GreenRED RedCYN CyanRDO Red-Orange
Notes
• *Available by modification only. Consult factory.
Describe Modification:
CATALOG NUMBER
Example:
Voltage Driver Finish Special
MVOLT Multi Volt 120V thru 277V (Blank) Standard DriverDMD Dimming Driver
BA Brushed AluminumBB Brushed BrassBSS Brushed Stainless SteelPB Polished BrassPSS Polished Stainless Steel
ABP Antique Brass PaintBBP Brushed Brass PaintLBPS Light Bronze Paint SmoothLSP Light SilverPGP Pale Gold
SGB Semi Gloss BlackSGW Semi Gloss WhitePRM Primer OnlyCPF* Custom Paint FinishCMF* Custom Metal Finish
MOD* Modification / Consult Factory
0.10.51.02.04.08.0
Typical Distribution Based on WHT30K
9 inch - Long Distribution
Grid in 1' increments
18"
LApprox10'-0"
Steel City H4BDor equivalent (by others)
Ribbed design with matteblack finish reduces glare
5.50"
11.50"
Ribbed design with matteblack finish reduces glare
Exposed fasteners for Wet Location Only
CROSS SECTION
Integraldriver
2.125" box min.
LED module withconcealed optic
See page 3 for lighting facts labels.
Performance Data
Size Dist. Lumens Watts LPW
9LONG Long 310 8.04 38.6
Performance data based on WHT30K non dimming.
Type:
Qty:
Project:
SPECIFICATIONS
9-LONG
STEP
STEP13
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
2
Rev. 06/23/15STEP13_9LONG© 2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be covered
by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
GREEN CMYK:C - 50M - 0Y - 100K - 25
GREY CMYK:C - 0M - 0Y - 0K - 50
GREY RGB:R - 147G - 149B - 152
GREEN RGB:R - 109G - 157B - 49
BLACK CMYK:C - 0M - 0Y - 0K - 100
BLACK RGB:R - 35G - 31B - 32
WHITE CMYK:C - 0M - 0Y - 0K - 0
WHITE RGB:R - 255G - 255B - 255
colorAccepted color combinations
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIRING & DIMMING
Dimming drivers require a 0-10V fluorescent-type dimming control.
Read all instructions before installation. Do not make live connections!
POWER SUPPLY / DIMMING
NON-DIMMING INSTALLATIONSConnect STEP WHITE wire to power NEUTRAL.Connect STEP BLACK wire to power HOT.Connect STEP GREEN wire to power GROUND.
WHITEBLACKGREEN
120Vor
277V
WH
ITE
BLA
CK
GR
EE
N
WH
ITE
BLA
CK
GR
EE
N
WH
ITE
BLA
CK
GR
EE
N
WH
ITE
BLA
CK
GR
EE
N
To otherSTEP
fixtures
WH
ITE
BLA
CK
GR
EE
N
VIO
LET
GR
EY
To otherSTEP
fixtures0-10V (+)
Dimmer (-)
VIO
LET
GR
EY
VIO
LET
GR
EY
VIO
LET
GR
EY
VIO
LET
GR
EY
VIOLETGREY
WHITEBLACKGREEN
120Vor
277V
WH
ITE
BLA
CK
GR
EE
N
WH
ITE
BLA
CK
GR
EE
N
WH
ITE
BLA
CK
GR
EE
N
WH
ITE
BLA
CK
GR
EE
N
To otherSTEP
fixtures
WH
ITE
BLA
CK
GR
EE
N
DIMMING INSTALLATIONSThe integral dimming driver is designed to the 0-10V IEC dimming specification 60929 and is compatible with common 0-10V dimmers and dimming systems. Do NOT connect line voltage to dimming input wires.Connect STEP WHITE wire to power NEUTRAL.Connect STEP BLACK wire to power HOT.Connect STEP VIOLET wire to POSITIVE INPUT of Dimming Control.Connect STEP GREY wire to NEGATIVE INPUT of Dimming Control.
Type:
Qty:
Project:
SPECIFICATIONS
9-LONG
STEP
STEP13
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
3
Rev. 06/23/15STEP13_9LONG© 2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be covered
by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
GREEN CMYK:C - 50M - 0Y - 100K - 25
GREY CMYK:C - 0M - 0Y - 0K - 50
GREY RGB:R - 147G - 149B - 152
GREEN RGB:R - 109G - 157B - 49
BLACK CMYK:C - 0M - 0Y - 0K - 100
BLACK RGB:R - 35G - 31B - 32
WHITE CMYK:C - 0M - 0Y - 0K - 0
WHITE RGB:R - 255G - 255B - 255
colorAccepted color combinations
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
WIN NAsolutions forms light
®
LIGHTING FACTS
Specification Sheet / In-grade / L05
All technical information in this document is subject to change. Copyright © MP Lighting. www.mplighting.com t 1.877.708.1184 f 604.708.1185
L05Application Exterior/interior directional in-grade light for lighting walls,
columns, architectural features or landscape features. Applicable for mounting into floors, walls, ceilings or other surfaces where a non-obtrusive luminaire is required.
IP Rating 66
Mounting Comes with splice box, aluminum flange and level gauge. Can be buried in earth/gravel or cast into concrete/paving stone with or without mounting base.
Electrical 1 Watt x 3 LED / 2.5Watt x 3 LED
Powered by remote dimmable/non-dimmable driver(sold separately).
*See website for recommended drivers *Remote emergency driver / inverter options available. Consult factory
Power Consumption
3.0 Watt
7.5 Watt
Light Output 3.0 Watt, 117~173lm7.5 Watt, 189~275lm*For photometric data, see page 03
Warranty 5 years limited warrantyEstimated useful life of LED is 50,000 hours.
Material Solid anodized aluminum or stainless steel (316), suitable for walk-over and drive-over applications. RoHS compliant.
Drive Over Rating
4400kg/9700 lbs
Weight 2.56lbs (1.16kg) (base extra).
Approval
07-2017
Code Wattage Color Beam Lens Option Angle Bracket* Input Voltage Base Height Finish
L05 - -
3 = 3 x 1W7 = 3 x 2.5W
W27S = 2700K, 80+CRIW30S = 3000K, 80+CRIW35S = 3500K, 80+CRIW41S = 4100K, 80+CRIW20H = 2000K, 90+CRIW30H = 3000K, 90+CRI
* Note: W20H has consis-tent binning that falls within 1.5 MacAdam ellipse.
0 = no angle 30 = 30° angle
MA = matte clear anodizedBA = black anodizedBZ = bronzeS6 = stainless steel 316ABZ = antique bronze
S = spot (12°)N = narrow flood
(30°)F= flood (60°)
HM = hex louver, matte anodized
HB = hex louver, black anodized
* Louver not available with angle bracket
D = DC A = 12V AC
0 = no base2 = 2” (51mm)6 = 6” (152mm)
* Internal angle bracket factory set. Cannot be field adjusted.
Type:
Project:
Modified:
Quantity:
Notes: PLEASE READ - When using a control system, consult dimming system manufacturer
with minimum load before installing 12V AC transformer. Malfunction and damage to
product due to improper dimming system installation or misuse will not be covered under
warranty. Only DC Drivers are recommended for dimming systems. Consult MP Lighting for
recommended drivers.
C = clearF = frost
Specification Sheet / In-grade / L05
All technical information in this document is subject to change. Copyright © MP Lighting. www.mplighting.com t 1.877.708.1184 f 604.708.1185 06-2017
12° (Spot Beam), Clear lens, Matte clear anodized
12° (Spot Beam), Clear lens, Matte clear anodized
30° (Narrow Flood Beam), Clear lens, Matte clear anodized
30° (Narrow Flood Beam), Clear lens, Matte clear anodized
60° (Wide Flood Beam), Clear lens, Matte clear anodized
60° (Wide Flood Beam), Clear lens, Matte clear anodized
3Watt
7.5Watt
DIMENSION:
LIGHT DISTRIBUTION:
Standard Stone Flange without base Standard Stone Flange with MK2 mounting base(MK2 not provided and sold separately)
3/4” NPT
Concrete
Ø4-1/8”Ø105mm
5”127mm
please pour concreteapprox. 6mm above top of flange
please pour concreteapprox. 6mm above top of flange
Ø6-1/2”165 mm
Ø3”76 mm
1”25 mm
1”25 mm
Rebarheight
2-1/2”65 mm
4-1/2”115 mm
2-1/2”65 mm
4-1/2”115 mm
3”76.2mm
Ø3-5/8”Ø92mm
Ø2-5/8”Ø67mm
trim 1/8”
3/4” NPT
Concrete
Ø4-1/8”Ø105mm
5”127mm
please pour concreteapprox. 6mm above top of flange
please pour concreteapprox. 6mm above top of flange
Ø6-1/2”165 mm
Ø3”76 mm
1”25 mm
1”25 mm
Rebarheight
2-1/2”65 mm
4-1/2”115 mm
2-1/2”65 mm
4-1/2”115 mm
3”76.2mm
Ø3-5/8”Ø92mm
Ø2-5/8”Ø67mm
trim 1/8”
3/4” NPT
Concrete
Ø4-1/8”Ø105mm
5”127mm
please pour concreteapprox. 6mm above top of flange
please pour concreteapprox. 6mm above top of flange
Ø6-1/2”165 mm
Ø3”76 mm
1”25 mm
1”25 mm
Rebarheight
2-1/2”65 mm
4-1/2”115 mm
2-1/2”65 mm
4-1/2”115 mm
3”76.2mm
Ø3-5/8”Ø92mm
Ø2-5/8”Ø67mm
trim 1/8”
Insert
Specification Sheet / In-grade / L05
All technical information in this document is subject to change. Copyright © MP Lighting. www.mplighting.com t 1.877.708.1184 f 604.708.1185 09-2015
PHOTOMETRIC DATA:
3W, 3000K, Clear lens 7.5W, 3000K, Clear lens
approx. 847 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 19.2°
3.0’ (914mm)
2.5’ (762mm)
2.0’ (610mm)
1.5’ (457.2mm)
1.0’ (305mm)
0.5’ (152.4mm)377
94.1
41.8
23.5
15.1
10.5
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
Illuminance at a DistanceL053 x 1W 12°3000K Std155 lm
Polar Candela Distribution
approx. 1362 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 19.2°
3.0’ (914mm)
2.5’ (762mm)
2.0’ (609mm)
1.5’ (457mm)
1.0’ (304mm)
0.5’ (152mm)605
151
67.3
37.8
24.2
16.8
Center Beam FC Beam Width
Illuminance at a DistanceL053 x 2.5W 12°3000K Std247 lm
Polar Candela Distribution
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
approx. 536 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.5°
4.7’ (1.43m)
3.9’ (1.18m)
3.2’ (970mm)
2.4’ (731mm)
1.6’ (487mm)
0.8’ (243mm)238
59.6
26.5
14.9
9.54
6.62
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
Illuminance at a DistanceL053 x 1W 30°3000K Std173 lm
Polar Candela Distribution
approx. 858 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.5°
4.7’ (1.43m)
3.9’ (1.18m)
3.1’ (945mm)
2.4’ (731mm)
1.6’ (487mm)
0.8’ (243mm)381
95.4
42.4
23.8
15.3
10.6
Center Beam FC Beam Width
Illuminance at a DistanceL053 x 2.5W 30°3000K Std275 lm
Polar Candela Distribution
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
approx. 122 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 60.4°
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
10.5’ (3.2m)
8.7’ (2.65m)
5.2’ (1.6m)
7.0’ (2.1m)
3.5’ (1.0m)
1.7’ (518mm)54.0
13.5
6.01
3.38
2.16
1.50
Center Beam FC Beam Width
Illuminance at a DistanceL053 x 1W 120°3000K Std117 lm
Polar Candela Distribution
approx. 195 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 60.5°
10.5’ (3.2m)
8.8’ (2.68m)
7.0’ (2.13m)
5.3’ (1.61m)
3.5’ (1.0m)
1.8’ (548mm)86.8
21.7
9.64
5.42
3.47
2.41
Center Beam FC Beam Width
Illuminance at a DistanceL053 x 2.5W 120°3000K Std189lm
Polar Candela Distribution
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
Lumen: 155lm, Spot beam (12°) Lumen: 247lm, Spot beam (12°)
Lumen: 173lm, Narrow flood beam (30°) Lumen: 275lm, Narrow flood beam (30°)
Lumen: 117lm, Flood beam (60°) Lumen: 189m, Flood beam (60°)
Polar Candela Distribution Polar Candela DistributionIlluminance at a Distance Illuminance at a Distance
Specification Sheet / Ingrade / L01
All technical information in this document is subject to change. Copyright © MP Lighting. www.mplighting.com t 1.877.708.1184 f 604.708.1185 03-2017
Code Wattage Color Beam Lens option Angle Bracket* Input Voltage Flange Base Height Finish
L01 - -
Code custom boxes & flange flange height
EBX - L01
1 = 1W 2 = 2.5W
T= thin spot (10°)S = spot (12°)N = narrow flood (30°)W= wide flood (120°)
C = clearF = frosted
LM = louver, matte anodized
LB = louver, black anodized
HM = hex louver, matte anodized
HB = hex louver, black anodized
0 = no angle 20 =20° angle X = custom
(20° max.)
S = standard flange 7/8” (22mm)
P = paving stone flange, 3-3/8” (86mm)
X= separate custom rectangular boxes (SFD,SGB,SGB2)
0 = no base2 = 2” (51mm)6 = 6” (152mm)
MA = matte clear anodizedBA = black anodizedBZ = bronze anodizedABZ = antique bronzeS6 = stainless steel 316PBR = polished brassABR = antique brassPS6 = polished stainless steel
* Louver is not available with Angle Bracket.* Internal angle bracket factory set. Cannot be field adjusted.
Type:
Project:
Modified:
Quantity:
Notes:
L01Application Exterior/interior directional in-grade light for lighting walls,
columns, architectural features or landscape features. Applicable for mounting into floors, walls, ceilings or other surfaces where a non-obtrusive luminaire is required.
IP Rating 66
Mounting Comes with splice box, aluminum flange and level gauge. Can be buried in earth/gravel or cast into concrete/paving stone with or without mounting base. Can be mounted with MK1 and MK2 (consult with factory)
Electrical Powered by remote dimmable/ non-dimmable driver (sold separately).
*See website for recommended drivers*Remote emergency driver / inverter options available.Consult factory.
Power Consumption
1.5 Watt (at 350 mA, 1.0 Watt)
3.0 Watt (at 700 mA, 2.5 Watt)
Light Output 1.0 Watt, 47~52lm2.5 Watt, 75.2~79.4lm*For photometric data, see page 03
Warranty 5 years limited warrantyEstimated useful life of LED is 50,000 hours.
Material Solid anodized aluminum, brass or stainless steel (316) with 1/4” (6mm) thick tempered glass lens, suitable for walk-over and drive-over applications. RoHS compliant.
Weight 1.8lbs (0.816kg) base extra
Approval
Order Guide
Example: L01-1-W20S-S-C-LM-0-D-S-0-MA
D = DC*DC not available for W20SA = 12V AC*12V AC not available for W22S/W41S & high CRI
W20S = 2000K, std CRIW22S = 2200K, std CRI W27S = 2700K, std CRIW30S = 3000K, std CRIW35S = 3500K, std CRIW41S = 4100K, std CRIW27H = 2700K, high CRIW30H = 3000K, high CRIW35H = 3500K, high CRI
*W20S AC only
*W22S DC only
SFD= Scepter FD, 4-1/4”(107mm)
SGB= Single gang box, 4-3/4”(122mm)
SGB2= Single gang box, 4-1/4”(107mm)
S = standardP = paving stone flange,
3-3/8” (86mm)
*Base height not applicable to custom boxes
Separate custom rectangular boxes
PLEASE READ - When using a control system, consult dimming system manufacturer with minimum load before installing 12V AC transformer. Malfunction and damage to product due to improper dimming system installation or misuse will not be covered under warranty. Only DC Drivers are recommended for dimming systems. Consult MP Lighting for recommended drivers.
Specification Sheet / Ingrade / L01
All technical information in this document is subject to change. Copyright © MP Lighting. www.mplighting.com t 1.877.708.1184 f 604.708.1185 01-2017
DIMENSION:
CUSTOM BOXES:
Standard flange with MK2 (MK2 not provided)
standard flange + round standard box
Scepter Box (Scepter FD) Single Gang Box 1 (Iberville BCMBD1-K)
Paving stone flange with no base Wall mount
pavingstone
sand
Paving stoneflange3-3/8” (86mm)Ø1-15/16”
Ø49mm
pavingstone
sand
Paving stoneflange3-3/8” (86mm)Ø1-15/16”
Ø49mm
Ø6-1/2”Ø165mm
Ø1-7/8”Ø49mm
Base Height
Ø6-1/2”Ø165mm
5-1/2”140mm
5-1/2”140mm
Ø1-5/8”Ø41mm
1-15/16"”49.5mm
3/4” NPT
Ø2-1/2"”Ø62mm
trim 1/8”3.18mm
4-7/8”124mm
3”76mm
Ø4-1/8”Ø105mm
please pour concreteapprox. 6mm abovetop of flange
Base Height
7/8”22mm
2-7/8”72mm
7/8”22mm
2-7/8”72mm
pavingstone
sand
Paving stoneflange3-3/8” (86mm)Ø1-15/16”
Ø49mm
pavingstone
sand
Paving stoneflange3-3/8” (86mm)Ø1-15/16”
Ø49mm
Ø6-1/2”Ø165mm
Ø1-7/8”Ø49mm
Base Height
Ø6-1/2”Ø165mm
5-1/2”140mm
5-1/2”140mm
Ø1-5/8”Ø41mm
1-15/16"”49.5mm
3/4” NPT
Ø2-1/2"”Ø62mm
trim 1/8”3.18mm
4-7/8”124mm
3”76mm
Ø4-1/8”Ø105mm
please pour concreteapprox. 6mm abovetop of flange
Base Height
7/8”22mm
2-7/8”72mm
7/8”22mm
2-7/8”72mm
A-A ( 1 : 4 )
A
A
83 mm3 1/4 in
116 mm4 1/2 in
133 mm5 1/4 in
107 mm4 1/4 in 74 mm
2 7/8 in
6 mm1/4 in
70 mm2 3/4 in
49 mm1 7/8 in
49 mm1 7/8 in
83 mm3 1/4 in
133 mm5 1/4 in
116 mm4 1/2 in
107 mm4 1/4 in 74 mm
2 7/8 in
70 mm2 3/4 in
D-D ( 1 : 4 )
D
D
116
mm
4 1/
2 in
83 m
m3
1/4
in
70 mm2 3/4 in
122
mm
4 3/
4 in
89 m
m3
1/2
in
51 mm2 in
49 mm1 7/8 in
51 mm2 in
122
mm
4 3/
4 in
89 m
m3
1/2
in
49 mm1 7/8 in
83 mm3 1/4 in
116 mm4 1/2 in
95 mm3 3/4 in
D-D ( 1 : 4 )
D
D
116
mm
4 1/
2 in
83 m
m3
1/4
in
70 mm2 3/4 in
122
mm
4 3/
4 in
89 m
m3
1/2
in
51 mm2 in
49 mm1 7/8 in
51 mm2 in
122
mm
4 3/
4 in
89 m
m3
1/2
in
49 mm1 7/8 in
83 mm3 1/4 in
116 mm4 1/2 in
95 mm3 3/4 in
A-A ( 1 : 4 )
A
A
83 mm3 1/4 in
116 mm4 1/2 in
133 mm5 1/4 in
107 mm4 1/4 in 74 mm
2 7/8 in
6 mm1/4 in
70 mm2 3/4 in
49 mm1 7/8 in
49 mm1 7/8 in
83 mm3 1/4 in
133 mm5 1/4 in
116 mm4 1/2 in
107 mm4 1/4 in 74 mm
2 7/8 in
70 mm2 3/4 in
pavingstone
sand
Paving stoneflange3-3/8” (86mm)Ø1-15/16”
Ø49mm
pavingstone
sand
Paving stoneflange3-3/8” (86mm)Ø1-15/16”
Ø49mm
Ø6-1/2”Ø165mm
Ø1-7/8”Ø49mm
Base Height
Ø6-1/2”Ø165mm
5-1/2”140mm
5-1/2”140mm
Ø1-5/8”Ø41mm
1-15/16"”49.5mm
3/4” NPT
Ø2-1/2"”Ø62mm
trim 1/8”3.18mm
4-7/8”124mm
3”76mm
Ø4-1/8”Ø105mm
please pour concreteapprox. 6mm abovetop of flange
Base Height
7/8”22mm
2-7/8”72mm
7/8”22mm
2-7/8”72mm
pavingstone
sand
Paving stoneflange3-3/8” (86mm)Ø1-15/16”
Ø49mm
pavingstone
sand
Paving stoneflange3-3/8” (86mm)Ø1-15/16”
Ø49mm
Ø6-1/2”Ø165mm
Ø1-7/8”Ø49mm
Base Height
Ø6-1/2”Ø165mm
5-1/2”140mm
5-1/2”140mm
Ø1-5/8”Ø41mm
1-15/16"”49.5mm
3/4” NPT
Ø2-1/2"”Ø62mm
trim 1/8”3.18mm
4-7/8”124mm
3”76mm
Ø4-1/8”Ø105mm
please pour concreteapprox. 6mm abovetop of flange
Base Height
7/8”22mm
2-7/8”72mm
7/8”22mm
2-7/8”72mm
pavingstone
sand
Paving stoneflange3-3/8” (86mm)Ø1-15/16”
Ø49mm
pavingstone
sand
Paving stoneflange3-3/8” (86mm)Ø1-15/16”
Ø49mm
Ø6-1/2”Ø165mm
Ø1-7/8”Ø49mm
Base Height
Ø6-1/2”Ø165mm
5-1/2”140mm
5-1/2”140mm
Ø1-5/8”Ø41mm
1-15/16"”49.5mm
3/4” NPT
Ø2-1/2"”Ø62mm
trim 1/8”3.18mm
4-7/8”124mm
3”76mm
Ø4-1/8”Ø105mm
please pour concreteapprox. 6mm abovetop of flange
Base Height
7/8”22mm
2-7/8”72mm
7/8”22mm
2-7/8”72mm
Specification Sheet / Ingrade / L01
All technical information in this document is subject to change. Copyright © MP Lighting. www.mplighting.com t 1.877.708.1184 f 604.708.1185 10-2015
12° (Spot Beam), Clear lens, Matte clear anodized
30° (Narrow Flood Beam), Clear lens, Matte clear anodized
120° (Wide Flood Beam), Clear lens, Matte clear anodized
2.5Watt
12° (Spot Beam), Clear lens, Matte clear anodized
30° (Narrow Flood Beam), Clear lens, Matte clear anodized
120° (Wide Flood Beam), Clear lens, Matte clear anodized
1Watt
LIGHT DISTRIBUTION:
Single Gang Box 2
A-A ( 1 : 4 )
A
A
70 mm2 3/4 in
116
mm
4 1/
2 in
83 m
m3
1/4
in
107
mm
4 1/
4 in
74 m
m2
7/8
in
66 mm2 5/8 in
49 mm1 7/8 in
111 mm4 3/8 in
83 mm3 1/4 in
116 mm4 1/2 in
A-A ( 1 : 4 )
A
A
70 mm2 3/4 in
116
mm
4 1/
2 in
83 m
m3
1/4
in
107
mm
4 1/
4 in
74 m
m2
7/8
in
66 mm2 5/8 in
49 mm1 7/8 in
111 mm4 3/8 in
83 mm3 1/4 in
116 mm4 1/2 in
Specification Sheet / Ingrade / L01
All technical information in this document is subject to change. Copyright © MP Lighting. 01-2017www.mplighting.com t 1.877.708.1184 f 604.708.1185
PHOTOMETRIC DATA:
1W, 3000K, Clear lens 2.5W, 3000K, Clear lens
approx. 257cdmax.
0°
180°
50°
90°-90°
-50°
0° Spread: 19.8°
1.5’
3.0’
4.5’
6.0’
7.5’
9.0’
0.5’(152mm)
1.0’(305mm)
1.6’(488mm)
2.1’(640mm)
2.6’(792mm)
3.1’(945mm)3.18
4.58
7.16
12.7
28.6
115
Center Beam FC Beam Width
Illuminance at a DistanceL011W, 12°Clear lens3000K Std49m
Polar Candela Distribution
approx. 97.4cdmax.
0°
180°
45°
90°-90°
-45°
0° Spread: 31.2° 90° Spread: 30.7°
1.5’
3.0’
4.5’
6.0’
7.5’
9.0’
0.8’(244mm)
1.7’(518mm)
2.5’(762mm)
3.3’(1.00m)
4.2’(1.28m)
5.0’(1.52m)
0.8’(244mm)
1.6’(487mm)
2.5’(762mm)
3.3’(1.00m)
4.1’(1.28m)
4.9’(1.49m)1.20
1.73
2.71
4.81
10.8
43.4
Center Beam FC Beam Width
Illuminance at a DistanceL011W, 30°Clear lens3000K Std62 lm
Polar Candela Distribution
approx. 97.4cdmax.
0°
180°
45°
90°-90°
-45°
0° Spread: 31.2° 90° Spread: 30.7°
1.5’
3.0’
4.5’
6.0’
7.5’
9.0’
0.8’(244mm)
1.7’(518mm)
2.5’(762mm)
3.3’(1.00m)
4.2’(1.28m)
5.0’(1.52m)
0.8’(244mm)
1.6’(487mm)
2.5’(762mm)
3.3’(1.00m)
4.1’(1.28m)
4.9’(1.49m)1.20
1.73
2.71
4.81
10.8
43.4
Center Beam FC Beam Width
Illuminance at a DistanceL011W, 30°Clear lens3000K Std62 lm
Polar Candela Distribution
approx. 15.0cdmax.
0°
180°
50°
90°-90°
-50°
0° Spread: 116.1° 90° Spread: 117.1°
1.5’
3.0’
4.5’
6.0’
7.5’
9.0’
4.8’(1.46m)
9.6’(2.92m)
14.4’(4.39m)
19.3’(5.88m)
24.1’(7.35m)
28.9’(8.81m)
4.9’(1.29m)
9.8’(2.99m)
14.7’(4.48m)
19.6’(5.97m)
24.5’(7.46m)
29.4’(8.96m)0.18
0.27
0.42
0.74
1.66
6.65
Center Beam FC Beam Width
Illuminance at a DistanceL011W, 120°Clear lens3000K Std47 lm
Polar Candela Distribution
approx. 15.0cdmax.
0°
180°
50°
90°-90°
-50°
0° Spread: 116.1° 90° Spread: 117.1°
1.5’
3.0’
4.5’
6.0’
7.5’
9.0’
4.8’(1.46m)
9.6’(2.92m)
14.4’(4.39m)
19.3’(5.88m)
24.1’(7.35m)
28.9’(8.81m)
4.9’(1.29m)
9.8’(2.99m)
14.7’(4.48m)
19.6’(5.97m)
24.5’(7.46m)
29.4’(8.96m)0.18
0.27
0.42
0.74
1.66
6.65
Center Beam FC Beam Width
Illuminance at a DistanceL011W, 120°Clear lens3000K Std47 lm
Polar Candela Distribution
approx. 429cdmax.
0°
180°
50°
90°-90°
-50°
0° Spread: 19.2°
1.5’
3.0’
4.5’
6.0’
7.5’
9.0’
0.5’ (152mm)
1.0’ (305mm)
1.5’ (457mm)
2.0’ (609mm)
2.5’ (762mm)
3.0’ (914mm)5.29
7.62
11.9
21.2
47.6
190
Center Beam FC Beam Width
Illuminance at a DistanceL012.5W, 12°Clear lens3000K Std78.4 lm
Polar Candela Distribution
approx. 286cdmax.
0°
180°
45°
90°-90°
-45°
0° Spread: 28.5° 90° Spread: 28.5°
1.5’
3.0’
4.5’
6.0’
7.5’
9.0’
0.8’(244mm)
1.5’(457mm)
2.3’(701mm)
3.1’(944mm)
3.8’(1.16m)
4.6’(1.40m)
0.8’(244mm)
1.5’(457mm)
2.3’(701mm)
3.1’(944mm)
3.8’(1.16m)
4.6’(1.40m)3.54
5.10
7.97
14.2
31.9
127
Center Beam FC Beam Width
Illuminance at a DistanceL012.5W, 30°Clear lens3000K Std79.4 lm
Polar Candela Distribution
approx. 286cdmax.
0°
180°
45°
90°-90°
-45°
0° Spread: 28.5° 90° Spread: 28.5°
1.5’
3.0’
4.5’
6.0’
7.5’
9.0’
0.8’(244mm)
1.5’(457mm)
2.3’(701mm)
3.1’(944mm)
3.8’(1.16m)
4.6’(1.40m)
0.8’(244mm)
1.5’(457mm)
2.3’(701mm)
3.1’(944mm)
3.8’(1.16m)
4.6’(1.40m)3.54
5.10
7.97
14.2
31.9
127
Center Beam FC Beam Width
Illuminance at a DistanceL012.5W, 30°Clear lens3000K Std79.4 lm
Polar Candela Distribution
approx. 24.1cdmax.
0°
180°
45°
90°-90°
-45°
0° Spread: 114.0° 90° Spread: 113.9°
1.5’
3.0’
4.5’
6.0’
7.5’
9.0’
4.8’(1.46m)
9.6’(2.92m)
14.4’(4.39m)
19.2’(5.85m)
24.0’(7.32m)
28.9’(8.81m)
4.9’(1.49m)
9.7’(2.95m)
14.6’(4.45m)
19.4’(5.91m)
24.3’(7.41m)
29.1’(8.87m)0.30
0.43
0.67
1.19
2.67
10.7
Center Beam FC Beam Width
Illuminance at a DistanceL012.5W, 120°Clear lens3000K Std75.2 lm
Polar Candela Distribution
approx. 24.1cdmax.
0°
180°
45°
90°-90°
-45°
0° Spread: 114.0° 90° Spread: 113.9°
1.5’
3.0’
4.5’
6.0’
7.5’
9.0’
4.8’(1.46m)
9.6’(2.92m)
14.4’(4.39m)
19.2’(5.85m)
24.0’(7.32m)
28.9’(8.81m)
4.9’(1.49m)
9.7’(2.95m)
14.6’(4.45m)
19.4’(5.91m)
24.3’(7.41m)
29.1’(8.87m)0.30
0.43
0.67
1.19
2.67
10.7
Center Beam FC Beam Width
Illuminance at a DistanceL012.5W, 120°Clear lens3000K Std75.2 lm
Polar Candela Distribution
Lumen: 49lm, Spot beam (12°) Lumen: 78.4lm, Spot beam (12°)
Lumen: 62lm, Narrow beam (30°) Lumen: 79.4lm, Narrow beam (30°)
Lumen: 47lm, Wide beam (120°) Lumen: 75.2m, Wide beam (120°)
Polar Candela Distribution Polar Candela DistributionIlluminance at a Distance Illuminance at a Distance
Fixture Type:
Catalog Number:
Project:
Location:
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
modernforms.comPhone (800) 526.2588Fax (800) 526.2585
Headquarters/Eastern Distribution Center44 Harbor Park Drive Port Washington, NY 11050
Central Distribution Center1600 Distribution CtLithia Springs, GA 30122
Western Distribution Center 1750 Archibald Avenue Ontario, CA 91760
FEATURES
• ADA compliant, low profile design• ETL & cETL wet location listed for WS-W73660• ETL & cETL damp location listed for WS-73660• White mitered glass• Full range dimming when used with compatible dimmers• Driver located in outlet box• Universal driver (120V-220V-277V)• 55,000 hour rated life• Color Temp: 3000K• CRI: 90
PRODUCT DESCRIPTION
An eminent contemporary architectural design, sleek lines embrace mitered glass. This bold ADA compliant structure accentuates wall height for a dramatic impression throughout the space.
SPECIFICATIONS
Construction: White mitered glass.
Light Source: High output LED.
Finish: Bronze (BZ).
Standards: ETL & cETL wet or damp location listed. ADA compliant.
FRAMED – model: WS-W73660/WS-73660
LED Interior & Exterior Sconce
ORDER NUMBER
Model ETL/cETL Height Wattage Voltage LED Lumens Delivered Lumens Finish
WS-73660WS-W73660
dampwet 60" 21W 120V-220V-277V 1044 (Up), 375 (Down) 644 (Up), 305 (Down) BZ Bronze
Example: WS-W73660-BZ
8" 4"
60"
Fixture Type:
Catalog Number:
Project:
Location:
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
modernforms.comPhone (800) 526.2588Fax (800) 526.2585
Headquarters/Eastern Distribution Center44 Harbor Park Drive Port Washington, NY 11050
Central Distribution Center1600 Distribution CtLithia Springs, GA 30122
Western Distribution Center 1750 Archibald Avenue Ontario, CA 91760
FEATURES
• Can be mounted as a wall sconce or ceiling flush mount• ADA compliant, low profile design• ETL & cETL wet location listed, IP65 rated• CEC Title 24 Compliant• Aluminum construction with white mitered glass• Replaceable LED module• Full range dimming when used with compatible dimmers• No transformer or driver required• 277V option available (special order)• 50,000 hour rated life• Color Temp: 3000K• CRI: 90
PRODUCT DESCRIPTION
Redefine being framed. This cleanly framed out simple block of light is available in two finishes and three sizes.
SPECIFICATIONS
Construction: Aluminum construction with white mitered glass.
Light Source: High output LED.
Finish: Graphite (GH), Bronze (BZ).
Standards: ETL & cETL damp location listed. IP65 rated. ADA compliant. CEC Title 24.
FRAMED – model: WS-W736
LED Interior & Exterior Sconce
ORDER NUMBER
Model Width Wattage VoltageLEDLumens
Delivered Lumens Finish
WS-W73608WS-W73614WS-W73620
8"14"20"
15W 25W 38W
120V1219 2378 3058
776 1183 1864
GHBZ
GraphiteBronze
Example: WS-W73608-GHFor 277V special order, add an “F” before the finish: WS-W73608F-GH
20"
10"
32"
WS-W73620
14"
8"
4"
WS-W73614
8"
8"
4"
WS-W73608
techlighting.com
DELIVERED LUMENS 699
WATTS 17.8
VOLTAGE 120V, 277V
DIMMING ELV
LIGHT DISTRIBUTION Symmetric
MOUNTING OPTIONS Downlight
CCT 3000K
CRI 80+
COLOR BINNING 3 Step
BUG RATING B1-U0-G0
DARK SKY Compliant
WET LISTED IP65
GENERAL LISTING ETL, Title 24
START TEMP -30°C
FIELD SERVICEABLE LED No
CONSTRUCTION Aluminum
HARDWARE Stainless Steel
FINISH Marine Grade Powder Coat
LED LIFETIME L70; 70,000 Hours
WARRANTY* 5 Years
700WSBOW LENGTH FINISH LAMP
4 4" B BLACKZ BRONZEH CHARCOALI SILVERW WHITE
-LED830 LED 80 CRI, 3000K 120V-LED830277 LED 80 CRI, 3000K 277V
BOWMAN 4shown in black
BOWMAN 4shown in charcoal
BOWMAN 4shown in bronze
BOWMAN 4shown in silver
BOWMAN 4shown in white
BOWMAN 4 WALL SCONCE
High quality LM80-tested LEDs for consistent long-life performance and color
Outstanding protection against the elements:
• Marine-grade powder coat finishes
• Stainless Steel mounting hardware
• Impact-resistant, UV stabilized frosted acrylic lensing
The classic silhouette of this sleek LED wall sconce makes it suitable for both indoor and outdoor applications. The Bowman’s die-cast aluminum body houses a powerful, long-lasting LED light source tightly controlled for down light only, yet supplying significant illumination for even the darkest nights.
ORDERING INFORMATION
* Visit techlighting.com for specific warranty limitations and details.
SPECIFICATIONS
7400 Linder Avenue, Skokie, Illinois 60077
T 847.410.4400 F 847.410.4500
FIXTURE TYPE & QUANTITY
PROJECT INFO
JOB NAME & INFO NOTES
© 2016 Tech Lighting, L.L.C. All rights reserved. The “Tech Lighting” graphic is a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right to change specifications for product improvements without notification.
techlighting.com
4.5"114 mm
4.5"114 mm
6.7"170 mm
180˚
408
490
327
245
163
82
0
82
163
245
327
408
490
170˚ 160˚ 150˚ 140˚
130˚
120˚
110˚
100˚
90˚
80˚
70˚
60˚
50˚
40˚30˚20˚10˚0˚
BOWMAN 4 WALL SCONCE
Bowman 4
PHOTOMETRICS* *For latest photometrics, please visit www. techlighting.com/OUTDOOR
BOWMAN 4Total Lumen Output: 699Total Power: 17.8Luminaire Efficacy: 39.1Color Temp: 3000KCRI: 80+BUG Rating: B1-U0-G0