LEADING THE INDUSTRY IN EPS MANUFACTURING

Foam-Control® Plus+®

Architectural Grade EPS

Insulation

www.achfoam.com

Foam-Control® Plus+®

Architectural Grade EPS

Applications

Benefits

+High Strength Foam-Control

® Plus+

® 150 (15 PSI) Foam-Control

® Plus+

® 250 (25 PSI)

Foam-Control® Plus+

® 400 (40 PSI)

Foam-Control® Plus+

® 600 (60 PSI)

+High R-Values R-5 R-7.5 R-10 R-15 R-20 R-30

+Stable, Long-Term Performance 50-Year R-Value Warranty

+Moisture Resistant Retains R-Value when exposed to moisture.

+Termite Resistant Perform Guard® treatment.

+Environmentally Friendly Reduces Energy Costs & Greenhouse Gas Emissions. Helps earn LEED credits. Is recyclable.

Quality

Thorough evaluations conducted by ICC-ES, combined with ACH Foam Technologies’ strict manufacturing specifications and quality control, assures our customers receive a consistently superior product. ACH Foam Technologies provides quality UL labeled EPS products.

Premium Quality & Value

ACH Foam Technologies’ Foam-Control® Plus+® is an architectural grade expanded polystyrene (EPS) insulation product line with a high compressive strength and high R-Value. Foam-Control® Plus+® is a premium grade insulation. It’s designed to give architects, designers and contractors all of the benefits of a high quality insulation: strength + energy efficiency + moisture resistance, bundled together to equal a budget friendly product that will help keep project costs on track.

From frost-line to roof-line, Foam-Control® Plus+® is used in a wide range of applications. Perimeter insulation, underslab insulation, cavity wall insulation, sheathing, pre-cast concrete applications, green roofs, plaza decks, and waterproofing applications especially benefit from its exceptional strength, energy efficiency, and moisture resistant properties.

Performance Commitment

Foam-Control® Plus+® comes with a 50-year warranty. Regardless of thickness, density or application - the warranty is the same. The stable, long-term R-Values of R-5, R-10, R-20, and R-30 help reduce energy costs and greenhouse gas emissions.

ACH Foam Technologies provides the option for scored sheets of Foam-Control®

Plus+®. The 4’ x 8’ scored Foam-Control® Plus+® insulation sheets allow for three widths: 16 inches, 2 feet, and 4 feet. Each sheet of Foam-Control® Plus+® 150, 250, 400 and 600 will also be clearly marked with a face label which includes material grade R-value, compressive strength, and UL information.

The closed cell structure of Foam-Control® Plus+® provides superior moisture resistance + consistent long-term performance in freeze-thaw conditions = performance you can count on.

Flexible Options

Needs change and so do project requirements, sometimes a little too fast. Foam-Control® Plus+® is available in a variety of sizes and strengths, allowing it to keep up with rapidly changing needs. The 15, 25, 40, and 60 psi strength ensures less jobsite breakage and helps to protect walls and foundations during backfill. Foam-Control® Plus+® is available with Perform Guard®, a safe and effective additive that resists termites. Single 4’ x 8’ sheets are available up to 36” thick.

Sustainability

Well insulated buildings not only perform better, they also reduce greenhouse gas emissions. The energy efficiency of Foam-Control® Plus+® contributes credits to LEED certified projects. EPS contains no ozone depleting agents and is recyclable.

Strength + Energy Efficiency + Moisture Resistance

Get

G

reen.

Go White. ®

Insulation

Plus+® is a trademark of ACH Foam Technologies, Denver, CO.

Foam-Control® and Perform Guard® are registered Trademarks of AFM Corporation, Lakeville, MN.

Copyright ©2011 ACH Foam Technologies. All rights reserved. Printed in USA.

Rev: ARC15-04/14

Perimeter & Underslab Insulation

Cavity Wall Insulation & Sheathing

Pre-Cast Concrete Cores

Green Roofs & Plaza Decks

Waterproofing Applications