POINT™Architectural Railing System

7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-7245 w: trexcommercial.com

© 2017 Trex Commercial Products, Inc. All rights reserved. Trex® is a federally registered trademark of Trex Company, Inc., Winchester, Virginia

The Point Series provides a sleek aesthetic feature to balconies, and stairways. A clean minimalistic option for any venue, it allows for a variety of handrail options eliminating the need for a vertical baluster.

Point™ Series

7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-7245 w: trexcommercial.com

© 2017 Trex Commercial Products, Inc. All rights reserved. Trex® is a federally registered trademark of Trex Company, Inc., Winchester, Virginia

Tech Specifications

Material: Stainless Steel (suitable for interior and exterior applications)

Height: 42" or Custom

Standard spacing: 4' On Center

Mount Type: Fascia

Top Rail/Handrail: 1.5" Diameter (#4 Finish)

Component Finish: 42 RA Max (Directional)

Infill options: 3/4" laminated glass – Standard (Multiple Glass Configurations Available)

ASTM STDS: A240/A240M/A554/A555/A666 (Stainless), C1048-12 (Glass),

F837-08 & F2281-04 (S/S Hardware)

Mounting Options

Node mount is offered standard, but avariety of custom solutions are availableto meet project requirements.

Configuration Options

There are two standard configuration choices. • Handrail configuration has the glass at 42"

and a handrail at 36"• Top rail configuration with the top rail at 42" Other options can be achieved. Contact your Trex Commercial Products representative for more information.

Point™ Series

7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-7245 w: trexcommercial.com

© 2017 Trex Commercial Products, Inc. All rights reserved. Trex® is a federally registered trademark of Trex Company, Inc., Winchester, Virginia

Handrail Configuration

Top Rail Configuration

Handrail/Top Rail Splice

#10-24 X 1” LOWHEAD SHCS

4’-0” (TYP.)

4’-0” (TYP.)

3’-6”

3’-6”

3’-0”

2’-0” MAX.

2’-0” MAX.

INTERNALLY THREADED SPACER 2 1/2” DIM. TYP.

INTERNALLY THREADED SPACER 2 1/2” DIM. TYP.

1 1/2” O.D. STAINLESSSTEEL HANDRAIL

DOT SERIES HANDRAILSTAND-OFF

3/4” LAMINATED GLASS – STANDARD

(MULTIPLE GLASS CONFIGURATIONS

AVAILABLE)

3/4” LAMINATED GLASS – STANDARD

(MULTIPLE GLASS CONFIGURATIONS

AVAILABLE)

HAIRLINE JOINT

INTERNAL SPLICE-LOCKINTERNAL EPOXY

SPLICE SLEEVE

1 1/2" x 11 GA. S.S. TUBEHAIRLINE JOINT

3/8”-16 X 1”SET SCREW (2X)

Epoxy Splice Splice Lock

Point™ Series

7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-7245 w: trexcommercial.com

© 2017 Trex Commercial Products, Inc. All rights reserved. Trex® is a federally registered trademark of Trex Company, Inc., Winchester, Virginia

Point Node Standoff Options

Concrete Mounting Detail Stringer Mount Detail

Notes:Handrails can be mounted to concrete or steel. Anchor size and type may vary based on engineering requirements.

3/8” - 16 ANCHOR (TO 1 3/4” LENGTH) 1/2”-13 ANCHOR (1 3/4” - 2 3/4”) 3/4” - 10 ANCHOR (2 3/4”-6”)

3/8” - 16 ANCHOR (TO 1 3/4” LENGTH) 1/2”-13 ANCHOR (1 3/4” - 2 3/4”) 3/4” - 10 ANCHOR (2 3/4”-6”)

6” MAX. 6” MAX.

6” MIN.

6” MIN.

Line Series Flare Series Dot Series