19
19
OCC
SCALE
SHEET TITLE
APPROVED
APPROVEDFOR CONSTR
CHECKED
DRAWN
ISSUED
PROJECT #
DRAWING NO
AUBURN HILLS
ALEX BACON
A-101
al
SCALE
SHEET TITLE
APPROVED
APPROVEDFOR CONSTR
CHECKED
DRAWN
ISSUED
DSA Architects - A Member of SHW Group, LLP• • • • • •• • • •• •• • • • ••••••••••••••••••
PROJECT #
DRAWING NO
ALEX BACON
A-103
S T A N L E Y P. A S H B U I L D I N G
GLASS TYPES:
NOTES:
WINDOW FRAME TYPES:
BRICK:
NTS
KEYPLAN
A200E
6
A200E
2
A200E
3
A200E
4
A200E
5
A200E
1
OCC
SCALE
SHEET TITLE
APPROVED
APPROVEDFOR CONSTR
CHECKED
DRAWN
ISSUED
PROJECT #
DRAWING NO
AUBURN HILLS
DIVISION 33.31 CAST-IN-PLACE CONCRETE RE: STRUCTURAL3.32 VAPOR RETARDER3.33 ARCHITECTURAL CONCRETE3.34 BRICK LEDGE RE: STRUCTURAL
DIVISION 44.20 FACE BRICK4.21 CONCRETE MASONRY UNIT (unit thickness)4.22 2" CAVITY WALL INSULATION4.23 OPEN HEAD WEEP AT 2'-0" O.C.4.24 CAVITY DRAINAGE MATERIAL4.25 EMBEDDED FLASHING RE: 27/A615E FOR SS DRIP EDGE, TYP4.26 COMPRESSIBLE FILLER4.27 GROUT SOLID4.28 GLASS UNIT MASONRY4.32 MASONRY ANCHOR AT 1'-4" OC4.34 TOP OF WALL ANCHOR AT 4'-0" OC4.35 BOND BEAM RE: STRUCTURAL4.36 MASONRY JOINT REINFORCEMENT / TIE
DIVISION 55.12 STRUCTURAL STEEL RE: STRUCTURAL5.21 STEEL JOISTS RE: STRUCTURAL5.31 METAL DECK RE: STRUCTURAL5.41 COLD-FORMED METAL FRAMING (depth)5.42 VERTICAL DEFLECTION CLIP
5.44 ATTACH FRAMING TO STRUCTURE5.51 STEEL ANGLE LINTEL RE: STRUCTURAL5.52 MISC STEEL (shape / size)5.53 PIPE AND TUBE RAILINGS
DIVISION 66.11 FRT WOOD BLOCKING (thickness other than 2x)6.13 FRT PLYWOOD (panel thickness)6.16 GLASS-MAT GYPSUM SHEATHING6.41 SOLID SURFACE MATRERIAL
DIVISION 77.12 WATERPROOFING SYSTEM7.14 INSULATION DRAINAGE PANEL7.21 2" X 2'-0" X CONT PERIMETER INSULATION7.22 BATT INSULATION (thickness)7.24 RIGID INSULATION (thickness other than 2")7.25 SPRAY POLYURETHANE FOAM INSULATION
7.27 AIR / VAPOR BARRIER7.28 AIR / VAPOR BARRIER TRANSITION
7.41 METAL SOFFIT / FASIA W/ FLUSH SEAMS RE: 16/A615E7.42 VERTICAL SEAM METAL PANEL SIDING SYSTEM
7.51 SINGLE-PLY ROOF SYSTEM7.52 ROOF SYSTEM FLASHING7.53 COMPRESSIBLE TUBE7.54 ROOF INSULATION (see A105E for thickness)7.61 COUNTERFLASHING AND RECEIVER RE: 23,24,26 / A615E7.65 PREFINISHED METAL COPING7.66 CONTINUOUS CLIP7.81 SPRAY APPLIED FIREPROOFING (1 hour rating)7.85 FIRE RESISTIVE JOINT SYSTEM7.91 SEALANT - ALL AROUND7.92 BACKER ROD AND SEALANT
DIVISION 88.11 HOLLOW METAL DOOR AND FRAME RE: DOOR SCHEDULE8.14 WOOD DOOR RE: DOOR SCHEDULE8.32 SLIDING ALUMINUM FRAMED GLASS DOOR8.41 STOREFRONT SYSTEM8.43 ENTRANCE DOOR8.44 CURTAIN WALL SYSTEM8.45 BRAKE METAL TRIM8.46 CURTAIN WALL ATTACHING CLIP
8.71 THRESHOLD8.81 INSULATING GLASS RE: ELEVATIONS FOR TYPE U.N.O.8.91 LOUVER8.92 LOUVER SILL FLASHING
DIVISION 9
9.22 NON-LOAD BEARING STEEL STUDS (depth)9.25 GYPSUM BOARD (thickness other than 5/8")9.26 L-BEAD9.27 F BEAD, 1/2" REVEAL
9.51 ACOUSTIC PANEL CEILING
DIVISION 1212.24
12.48 FLOOR MAT
DIVISION 23 (REFER TO MECHANICAL)
31.23 • •• • • • •• • • • •• •• • • • • • • •• •• •• • • • • • • •• • • •• • • •• •• •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
23.01 RADIATOR
DIVISIONS 31, 32, 33 (REFER TO CIVIL)31.21 FINISH GRADE
32.13 CONCRETE PAVEMENT32.14 PAVEMENT ISOLATION JOINT AND SEALANT
EXTERIOR ENVELOPE NOTES:
1. FOUNDATIONS AND FOOTINGS SHOWN ARE SCHEMATIC. REFER TOSTRUCTURAL DOCUMENTS FOR REQUIREMENTS.
2. REFER TO STRUCTURAL DOCUMENTS FOR VERTICALREINFORCING IN CONCRETE MASONRY WALLS.
3. INTERIOR FINISHES ARE NOT SHOWN. REFER TOROOM FINISH SCHEDULE.
4. EJ = EXPANSION JOINT. REFER TO DETAIL 13 / A601E
5. MAINTAIN AIR/VAPOR BARRIER CONTINUITY THROUGHOUT PROJECT. SEALPERIMETER, JOINTS BETWEEN SUBSTRATES, PENETRATIONS AND PUNCTURES.
6. REFER TO ELEVATIONS FOR GLAZING ANDFRAME TYPES.
7. REFER TO REFLECTED CEILING PLANS FOR CEILING HEIGHTS.
8. FILL VOIDS AROUND STOREFRONT AND CURTAIN WALL PERIMETERS WITH7.22(FILL) INSULATION.
9. PAINT EXPOSED FERROUS METAL.
6.44 PLASTIC LAM. OVER PART. BD.
9.21 SHAFTWALL ASSEMBLY RE: A005E
9.30 CERAMIC TILE (RE: finish schedule)9.41 ACOUSTIC BATT INSULATION
9.52 CEILING SUSPENSION SYSTEM
DIVISION 1010.11 VISUAL DISPLAY SURFACE10.14 SIGNAGE10.17 TELEPHONE10.21 TOILET COMPARTMENT10.28 TOILET ACCESSORIES RE: A400E
ROLLER SHADE12.32 CASEWORK
DIVISION 1414.24 ELEVATOR
DIVISION 2222.40 PLUMBING FIXTURE22.47 WATER COOLERS
23.71 DIFFUSERS, REGISTERS, AND GRILLES
DIVISION 2626.51 INTERIOR LIGHTING
4.72 CAST STONE MASONRY
5.54 METAL STAIRS5.70 DECORATIVE METAL RAILINGS
7.43 FLAT PANEL METAL SIDING SIDING SYSTEM7.44 CONTINUOUS CLEAT7.45 FIXED OR SLIDING CLEAT RE: 6/A615E
8.93 INSECT SCREEN
9.28 V-SHAPED CONTROL JOINT9.29 3 PIECE EXTRUDED ALUMINUM GYPSUM BOARD EXPANSION JOINT
10. EXTERIOR WALL LINTELS AND BRICK LEDGES TO BE GALVANIZED.
11. STEEL TO RECEIVE SPRAY APPLIED FIREPROOFING TO BE UNPRIMED.
KEY NOTESDIVISION NUMBERS REFER TO CSI MASTER FORMAT
31.24 FILTER FABRIC OVER GRAVEL DRAINAGE BED
12. REFER TO STRUCTURAL FOR SUB-SLAB PREPARATION INCLUDING DRAINAGECOURSE, UNDERDRAINS AND VAPOR RETARDER
7.95 BUILDING EXPANSION JOINT
7.29 BUILDING WRAP AIR / MOISTURE BARRIER
4.73 CAST STONE ANCHOR @ HEAD JOINT, EXP ANCHOR TO CMU
4.37 12••• •• • • • • • •• • •• • • • • • •• •• • •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
7.30 DIRECT APPLIED FINISH SYSTEM7.31 EXTERIOR INSULATED FINISH SYSTEM
5.43 COLD-FORMED METAL FURRING, 2" ZEE SHAPE @ 24" oc
7.26 VAPOR RETARDER
8.47 METAL ANCHOR STRAP
A101E
1
A101E
2
A101E
3
A101E
4 A101E
5
A101E
6
A101E
13
A103E
12
A103E
11
A103E
10
A103E
14
A103E
15
A103E
16
A103E
21
A101E
8
A101E
7
A103E
17
SCALE
SHEET TITLE
APPROVED
APPROVEDFOR CONSTR
CHECKED
DRAWN
ISSUED
DSA Architects - A Member of SHW Group, LLP• • • • • •• • • •• •• • • • ••••••••••••••••••
PROJECT #
DRAWING NO
ALEX BACON
A-300
A101E
1
OCC
SCALE
SHEET TITLE
APPROVED
APPROVEDFOR CONSTR
CHECKED
DRAWN
ISSUED
PROJECT #
DRAWING NO
AUBURN HILLS
A400
ENLARGED TOILET ROOMS
STAIR SECTION
1/4" = 1'-0"
A103E
4
A400E
8
FIRST FLOORSECOND FLOOR
ALEX BACON
PRO
DU
CED
BY A
N A
UTO
DESK
EDU
CA
TION
AL PR
OD
UC
T
WALL SYSTEM 1:EXTERIOR
FACE BRICKAIR SPACE2" CAVITY INSULATIONAIR & VAPOR BARRIERCONCRETE MASONRY UNITNON LOAD BEARING METAL FRAMINGGYPSUM BOARD
INTERIOR
WALL SYSTEM 2:EXTERIOR
VERTICAL STANDING SEAM METAL PANEL SIDING"TYVEK" COMMERCIAL BUILDING WRAP OR EQ.3/4" FIRE RETARDANT TREATED PLYWOOD2" RIGID INSULATION IN 2" GALV. STL. 'Z'AIR & VAPOR BARRIERCONCRETE MASONRY UNITNON-LOAD BEARING METAL FRAMINGGYPSUM BOARD
INTERIOR
WALL SYSTEM 3:EXTERIOR
CONCRETE FACE BRICK (CB-1)AIR SPACE2" CAVITY INSULATIONAIR & VAPOR BARRIERCONCRETE MASONRY UNITNON LOAD BEARING METAL FRAMINGGYPSUM BOARD
INTERIOR
WALL SYSTEM 4:EXTERIOR
FLAT PANEL METAL SIDING"TYVEK" COMMERCIAL BUILDING WRAP OR EQ.3/4" FIRE RETARDANT TREATED PLYWOOD2" RIGID INSULATION IN 2" GALV. STL. 'Z'AIR & VAPOR BARRIERCONCRETE MASONRY UNITNON-LOAD BEARING METAL FRAMINGGYPSUM BOARD
INTERIOR
NOTE: REFER TO ELEVATIONS FOR BRICK, STOREFRONT AND GLASS TYPES
WALL SYSTEMS
31.23 • •• • • • •• • • • •• •• • • • • • • •• •• •• • • • • • • •• • • •• • • •• •• •• • • • • • • • • • • • • • • • • • • • • •
DIVISIONS 31, 32, 32 (REFER TO CIVIL)31.21 FINISH GRADE
32.13 CONCRETE PAVEMENT32.14 PAVEMENT ISOLATION JOINT AND SEALANT
EXTERIOR ENVELOPE NOTES:
1. FOUNDATIONS AND FOOTINGS SHOWN ARE SCHEMATIC. REFER TOSTRUCTURAL DOCUMENTS FOR REQUIREMENTS.
2. REFER TO STRUCTURAL DOCUMENTS FOR VERTICALREINFORCING IN CONCRETE MASONRY WALLS.
3. INTERIOR FINISHES ARE NOT SHOWN. REFER TOROOM FINISH SCHEDULE.
4. EJ = EXPANSION JOINT. REFER TO DETAILS 13 / A601E
5. MAINTAIN AIR/VAPOR BARRIER CONTINUITY THROUGHOUT PROJECT. SEALPERIMETER, JOINTS BETWEEN SUBSTRATES, PENETRATIONS AND PUNCTURES.
6. REFER TO ELEVATIONS FOR GLAZING TYPES.
7. REFER TO REFLECTED CEILING PLANS FOR CEILING HEIGHTS.
8. FILL VOIDS AROUND STOREFRONT AND CURTAIN WALL PERIMETERS WITH7.22(FILL) INSULATION.
9. PAINT EXPOSED FERROUS METAL.
10. EXTERIOR WALL LINTELS AND BRICK LEDGES TO BE GALVANIZED.
11. STEEL TO RECEIVE SPRAY APPLIED FIREPROOFING TO BE UNPRIMED.
KEY NOTESDIVISION NUMBERS REFER TO CSI MASTER FORMAT
31.24 FILTER FABRIC OVER GRAVEL DRAINAGE BED
12. REFER TO STRUCTURAL FOR SUB-SLAB PREPARATION INCLUDINGDRAINAGE COURSE, UNDERDRAINS AND VAPOR RETARDER
7.12 WATERPROOFING SYSTEM7.14 INSULATION DRAINAGE PANEL7.21 2" X 2'-0" X CONT PERIMETER INSULATION
DIVISION 7
DIVISION 33.31 CAST-IN-PLACE CONCRETE RE: STRUCTURAL3.34 BRICK LEDGE RE: STRUCTURAL
7.81 SPRAY APPLIED FIREPROOFING (1 hour rating)
DIVISION 55.44 ATTACH FRAMING TO STRUCTURE5.52 MISC STEEL (shape / size)5.70 DECORATIVE METAL RAILINGS
7.26 VAPOR RETARDER
4.34 TOP OF WALL ANCHOR AT 4'-0" OC
DIVISION 44.27 GROUT SOLID
A200
2
A201E
2
A200
3
A200
1
OCC
SCALE
SHEET TITLE
APPROVED
APPROVEDFOR CONSTR
CHECKED
DRAWN
ISSUED
PROJECT #
DRAWING NO
AUBURN HILLS
A500
1
A500
3
A500E
5
OCC
SCALE
SHEET TITLE
APPROVED
APPROVEDFOR CONSTR
CHECKED
DRAWN
ISSUED
PROJECT #
DRAWING NO
AUBURN HILLS
A500
2
A500
4
A500
9
A500
7
A500
8
A500
12
A500
11
A500
6
A500
10
Project: Design construction documents for a two story, two bath, three bedroom home with unfinished basement and two car garage.
Scope of Work: Convert freight loading area into lounge and male/female bathrooms. Convert a single door bus garage into a two door bus garage. Install electrical diesel engine warming stations for every bus parking space. Replace catch basin storm drains in far north parking area.
Photo's from the Ann Arbor News Website: http://www.annarbor.com/news/ypsilanti/ypsilanti-willow-run-bus-garage-renovations-on-track-for-completion-by-1st-day-of-school/
.
Southgate Police Department14710 Reaume Pkwy Southgate, MI 48195
Scope of Work: The project will keep the Southgate police department in compliance with ADA handicap walkways. The work includes construction of ADA compliant concrete sidewalks, walk ways, and maintain ADA compliant grading while insuring proper drainage.
