Give homes a beautiful, consistent finish that looks

brighter, performs better and lasts longer.

Plank, Panel and Shingle Colors

Arctic WhiteHardiePlank – 8.25" CM

Trim Colors

Navajo BeigeHardiePlank – 8.25” CM

Cobble StoneHardiePlank – 8.25” CM

Monterey TaupeHardiePlank – 8.25” CM

Khaki BrownHardiePlank – 8.25” CM

Timber BarkHardiePlank – 8.25” CM

PrimedHardiePlank – 5.25", 6.25", 7.25", 8.25", 9.25” SM & CM

Navajo BeigeHardieTrim NT3 – 5/4

Cobble StoneHardieTrim NT3 – 5/4

Monterey TaupeHardieTrim NT3 – 5/4

Khaki BrownHardieTrim NT3 – 5/4

© 2013 James Hardie Building Products, Inc. All Rights Reserved. ™, SM, and ® denote trademarks or registered trademarks of

James Hardie Technology Limited. The is a registered trademark of James Hardie Technology Limited. HS13119 09/13

J&L BUILDING MATERIALS – ThE JAMES hARDIE® SoURCE

Count on J&L Building Materials to deliver the world’s finest siding by James Hardie® Building Products. J&L Building Materials’ service makes getting siding, and trim boards from James Hardie as simple as can be.

J&L Building Materials, Inc. is a family owned independent distributor that has been assisting

contractors and builders since 1958. With 7 locations throughout Southeastern Pennsylvania and

Delaware, J&L is proud to offer an unmatched level of service and exceptional products.

jlbuilding.com610.644.6311

James Hardie® fiber cement products available at

Note: Colors shown are as accurate as printing methods will permit. Please see actual product sample for true color. Product and color availability vary by region and are subject to change.

Arctic WhiteHardieTrim NT3 – 5/4

Timber BarkHardieTrim NT3 – 5/4

Autumn TanHardiePlank – 8.25” CM

Light MistHardiePlank – 8.25” CM

Boothbay BlueHardiePlank – 8.25” CM

Iron GrayHardiePlank – 8.25” CM

In addition to pick-to-the-piece product, each Holden Humphrey Job Pack contains James Hardie accessories and literature.

BEAUTIfULIN A

WoRLD of ExTREMES

J&L BUILDING MATERIALS SToCK ChART of JAMES hARDIE® PRoDUCT CoLoRS

Only James Hardie® HZ5® products

are specifically engineered for harsh

northern climates. During manufacturing,

proven and refined raw materials are

chemically bonded with proprietary

additives to enhance moisture resistance

and increase product strength.

Unique Formulation

Revolutionary ColorPlus® Technology

provides the ultimate in aesthetics

and performance. Innovative color

process applies a consistent,

baked-on finish that provides

years of lasting beauty

and fade resistance.

Finishing Technology

Diversified products defined by

durability, lower maintenance,

superior aesthetics and an array

of design options. Providing

homeowners peace of mind with

exceptional warranties through

a single manufacturer.

Complete Exterior

For over 30 years, James Hardie® fiber

cement products have been used to create

better places to live. With each new home,

the James Hardie name has come to

stand for uncompromising quality.

That long track record has earned the loyalty

of homeowners and the endorsements of

trusted authorities in the building industry.

Featured on the DIY

Network’s Blog Cabin

in 2012 & 2013

A REPUTATIoN BUILT oN TRUST

HardiePlank® lap siding

is backed by the Good

Housekeeping Seal

JAMES hARDIE® – ToUGhER ThAN ThE ELEMENTS

Chosen by builders

as a “Brand Leader”

in Builder Magazine

#1 Return on Investment

every year since 2005 in

Remodeling Magazine*

NT3™ Boards &4/4 Batten Boards

Length: 12' boards

NT3™ Board4/4 SmoothThickness: 3/4"Widths: 3.5", 5.5", 7.25", 11.25"

NT3™ Board5/4 SmoothThickness: 1"Widths: 3.5", 4.5", 5.5", 7.25", 11.25"

4/4 Batten BoardRustic Grain®

Thickness: 3/4"Width: 2.5"

4/4 Batten BoardSmoothThickness: 3/4"Width: 2.5"

5.5" in Arctic White

3.5" in Arctic White

Navajo Beige Arctic White

Lap Siding &Accent Trim

Not Currently Available in Canada

Lap Siding – SmoothThickness: 5/8"Widths: 5.25" (4" exp.) 7.25" (6" exp.) 8.25" (7" exp.)Length: 12' planks

Accent Trim – SmoothThickness: 1.5"Widths: 3.5" 5.5"Length: 12' boards

Mountain Sage Khaki Brown

Crown Moulding

Panels

Vented & Non-Vented Panel – Cedarmill®

Thickness: 1/4"Sizes: 12" x 12', 16" x 12', 24" x 8'

Vented & Non-Vented Panel – SmoothThickness: 1/4"Sizes: 12" x 12', 16" x 12', 24" x 8'

Navajo Beige Navajo Beige

See back for colors.

*Product and color availability varies by region. Please check with your local representative, visit jameshardie.com or call 1.866.4HARDIE for availability in your area.

Lap Siding

Thickness: 5/16"Length: 12' planks

Select Cedarmill©

Widths: 5.25" (4" exp.),*6.25" (5" exp.), 7.25" (6" exp.)8.25" (7" exp.)

SmoothWidths: 5.25" (4" exp.),,*6.25" (5" exp.), 7.25" (6" exp.),8.25" (7" exp.)

Beaded Cedarmill©

Widths: 8.25" (7" exp.)Beaded SmoothWidths: 8.25" (7" exp.)

Cobble Stone

Arctic White Sandstone Beige

Autumn Tan

Vertical Siding

Thickness: 5/16"

Sierra 8Sizes: 4' x 8' and 4' x 10'

StuccoSizes: 4' x 8' and 4' x 10'

Cedarmill©

Sizes: 4' x 8' and 4' x 10'SmoothSizes: 4' x 8' and 4' x 10'

Boothbay Blue

Autumn Tan Woodstock Brown Countrylane Red

Siding

Thickness:1/4"

Straight Edge PanelWidth: 48"Height: 15.25" (7" exp.) 14" (5" exp.)*

Staggered Edge PanelWidth: 48"Height: 15.875" (6" exp.)

Individual ShinglesSizes: 4.2", 5.5", 6.75", 7.25", 3.5", 4.5", 5.5", 7", 10" x 15.25" (7" exp.)* 8.75" x 14" (5" exp.)*

Khaki Brown Monterey Taupe

Evening Blue

JAMES hARDIE® PRoDUCT AvAILABILITy

Installed on 5.5 million homes

from coast to coast, James Hardie®

products are built to withstand the

most extreme elements. It’s easy to

see why James Hardie is the most

popular brand of siding in America.

*Remodeling Magazines’ Cost vs. Value Report states that re-siding a home with fiber cement siding in the mid-range or larger categories provides the #1 return on investment.