Navion LEDArea, Site and Roadway Luminaire

1

A New Performance Standard in LED Roadway Lighting With industry-leading, patented optics in a scalable package, the Navion LED area, site and roadway luminaire delivers state-of-the-art optical control, low maintenance costs, rugged construction and modern styling. The Navion fixture is designed for years of operation with minimal service requirements. Its superior performance and configurability provide uniform, glare-free, energy-efficient light for commercial, industrial and municipal parking lots as well as roadway applications.

Long Life with Low Maintenance CostsSuperior illumination, low maintenance, long life, and low cost of ownership are critical factors when lighting roads and public spaces. Ideal for retrofit and new construction applications, the Navion luminaire can be tailored to meet your most important needs without compromising on specification features. The five configurations of the Navion fixture allow scalability from 3,600 to 22,000 delivered lumens. 4000K / 70 CRI is standard, with 6000K / 70 CRI and 3000K / 80 CRI options available. LED components are IP66 rated and the fixture is wet-location listed, with an IP66 housing option available.

Customer-Focused Design Designed to meet the full range of outdoor lighting challenges in area, site and roadway applications, the Navion luminaire is available with a wide array of optics and specification performance features. A tool-less, removable power tray door and quick electrical disconnects make installation and maintenance a snap. 10kV common (line-to-ground) and differential (line-to-line) surge protection is standard. Four-bolt mounting with cast-in leveling steps ensures simple installation, while a Super TGIC polyester powder-coat finish provides years of worry-free ownership.

Roadway Lighting Redefined

2

Each of the patented Cooper Lighting AccuLED Optics™ in the LED Light Square renders the entirety of the pattern. As the number of LEDs increases, so does the illuminance, allowing lumen output and energy consumption to be scaled and optimized for each application. The AccuLED optic ensures that every lumen produced by the LED is delivered where needed. Uplight, glare, obtrusive spill light and overlit hot spots are replaced by uniform, application-tailored illumination.

3

Construction• Tool-less entry with hinged removable power door for

easy maintenance• 3G vibration rated• IP66 LED Light Squares• Wet location rated housing (IP66 housing optional)• Extruded aluminum heat sink scaled to lumen package• Rugged, die-cast aluminum housing

Electrical• Operates in -40°C to 40°C ambient temperatures with optional

50°C high ambient configuration• 10kV common (line-to-ground) and differential (line-to-line)

surge protector• L90, 60,000 hours at 40°C, compliant with IESNA TM-21• LED driver mounted directly to removable door for optimal

heat sinking• 120-277V 50/60Hz, 347V 60Hz, or 480V 60Hz operation• Quick-disconnects for tool-less removal of power door

Finish• Five-stage super TGIC paint resists extreme weather

conditions while providing optimal color and gloss retention. Available in standard grey or optional bronze, black, dark platinum, graphite metallic or white.

Warranty• Five-year limited warranty

Navion Design Excellence

Tool-less EntryStainless steel latches provide easy, tool-less access to electrical compartment, even with lineman’s gloves.

Quick DisconnectsConnections between power door and housing are made with tool-less quick disconnects. Power door removes in seconds.

Bird GuardStandard bird guard fits securely around 1-1/4" and 2" pipe (1-5/8" to 2-3/8" O.D.).

Four-Bolt MountingSturdy four-bolt mounting brackets fit 1-1/4" to 2" pipe (1-5/8" to 2-3/8" O.D.). Available with optional built-in level indicator for a secure, level installation.

Stepping Up to the ChallengeThe Navion luminaire is designed to provide superior optical performance in a package that is easy to install and maintain. With HID equivalents from 70W HPS up to 400W MH, and Cooper Lighting’s industry-leading AccuLED OpticsTM system, the Navion fixture is designed to meet the toughest lighting challenges.

Grey

Dark Platinum

Bronze

Graphite Metallic

Black

White

4

. . .Tool-less Entry

. . .Extruded Aluminum Heat Sinks

Scalable Lumen Package. . .

NEMA Photocontrol ReceptacleGasketed receptacle for mounting standard NEMA photocontrol (order separately).

Optional Features

Self-Cleaning Heat Sinks

Surge ProtectionStandard 10kV common (line-to-ground) and differential (line-to-line) mode protection.

Occupancy SensorOptional motion sensor reduces energy use for site lighting applications.

IP66 RatingHousing available with IP66 rating for dust and water.

5

6

Versatility and Simplicity

The Navion luminaire’s performance comes with years of low-cost, low-hassle ownership. With lumen maintenance and life expectancy far beyond traditional HID light sources, regular and time-consuming service visits are a thing of the past.

The simple and spacious Navion fixture housing is designed to fit lineman’s gloves and can be installed with simple tools. Key electrical components are mounted on the power door, so service is tool-less. The door is small enough to hold in one hand, making field replacement a snap.

The Navion luminaire is designed to meet a wide range of outdoor lighting needs, from single-fixture applications to large-scale parking lots. Commercial customers will find it ideal for office buildings and shopping centers. Its higher-lumen configurations excel in large parking applications, such as institutions, retail, airports, manufacturing and distribution facilities.

Whatever the application, the Navion luminaire delivers superior optical performance in a durable, modern design, while providing 30 - 70% less energy usage compared to typical HID luminaires. With 90% lumen maintenance at 60,000 hours (over 16 years at 10 hours daily use), the Navion fixture offers a long life and additional savings in maintenance costs.

The Navion luminaire is offered in ten optical packages to meet the exact needs of the illuminated area, and the fixture’s size and construction are scaled to the specific lumen package. Designed to withstand harsh environments, its rugged, die-cast aluminum construction and 2.5-mil polyester powder-coat finish provide superior protection. 3G vibration rating and 10kV dual-mode surge protection are standard.

7

Energy Savings and Environmental Stewardship The simplest and most effective way to reduce a lighting fixture’s impact on the environment is to minimize its energy consumption. By incorporating Cooper Lighting’s Light Squares, the Navion luminaire provides energy savings from 30% to 70% compared to standard HID solutions.

Long LifeWith a 60,000+ hour rated life (at 90% lumen maintenance), the Navion fixture operates six times longer than traditional metal halide solutions.

Low MaintenanceWith simple quick disconnects, Light Squares are easily removed in the field for replacement or rotation of optics.

Scalable Illumination with LED Light Squares

4000K nominal

2700K

High Pressure Sodium[2000K]

Metal Halide [Quartz, Ceramic]

Cooper LED Squares[4000K]

Cold LED[6000-6500K]

3000K 4500K 6500K

Warm White ColorLighting designers, architects and specifying engineers have long preferred light sources that provide a balanced spectral power distribution and warm white light. Many LED solutions standardize on a cold blue 6000-6500K correlated color temperature (CCT) to maximize lumen output. The Navion LED provides warm white light at a standard 4000K CCT with no sacrifice in lumen output.

Ten Optical Distributions

Superior Efficiency and Control With efficiencies as high as 95%, the patented AccuLED OpticsTM system is up to 30% more efficient than traditional HID optical systems. Available in ten beam distributions, the AccuLED Optics

system provides the flexibility and performance required for any outdoor application.

Type 2 Type 3

Five Asymmetric Distributions

Three Symmetric Distributions

Three Spill Light Eliminator Distributions

Type 4 RectangularWide

SL2 SL3 SL4

Type 5 SquareExtra Wide

Type 5 SquareWide

Type 5 SquareMedium

8

Power and Lumens by Light Square Count

Number of Light Squares 1 2 3 4 6

Power (Wattage) 51 103 154 206 309

Current @ 120V (A) 0.43 0.86 1.29 1.72 2.58

Current @ 277V (A) 0.19 0.38 0.57 0.76 1.14

Optics

T2Lumens 3762 7557 11367 14831 22196

BUG Rating 1-0-1 2-0-2 3-0-3 3-0-3 3-0-3

T3Lumens 3748 7548 11324 14774 22111

BUG Rating 1-0-1 2-0-2 3-0-3 3-0-3 3-0-3

T4Lumens 3593 7236 10856 14164 21197

BUG Rating 1-0-1 1-0-2 2-0-2 2-0-3 3-0-4

SL2Lumens 3686 7423 11156 14529 21744

BUG Rating 1-0-1 1-0-2 2-0-2 2-0-2 3-0-3

SL3Lumens 3640 7331 10999 14351 21477

BUG Rating 1-0-1 1-0-2 2-0-2 2-0-3 3-0-4

SL4Lumens 3702 7455 11184 14592 21838

BUG Rating 1-0-1 1-0-2 2-0-2 2-0-3 3-0-4

RWLumens 3756 7565 11350 14808 22161

BUG Rating 2-0-2 3-0-3 3-0-3 3-0-3 4-0-4

5MQLumens 3954 7962 11945 15585 23324

BUG Rating 2-0-1 3-0-2 4-0-2 4-0-2 5-0-3

5WQLumens 3930 7914 11874 15492 23185

BUG Rating 3-0-1 3-0-2 4-0-2 4-0-2 5-0-3

5XQLumens 3834 7721 11584 15113 22618

BUG Rating 2-0-2 3-0-3 4-0-3 4-0-3 5-0-4

Performance and VersatilityThe Navion luminaire is built around LED technology and designed to accommodate ongoing improvements in LED chips and drivers, making it the ideal solution for both current and future lighting requirements.

Power (Watts)

Number of Light Squares

Power(Watts)

Typical Equivalent

1 51W 70-100W HPS, 175W MV

2 103W 100-200W HPS, 175-200W MH

3 154W 200-250W HPS, 200-250W MH

4 206W 250-400W HPS, 250-350W MH

6 309W 400W HPS, 350-400W MH

NOTE: Light squares are standard 4000K CCT and nominal 70 CRI.

Lumen Maintenance

Ambient Temperature

TM-21 Lumen Maintenance (60,000 Hours)

Theoretical L70 (Hours)

25°C > 94% > 350,000

40°C > 93% > 250,000

50°C > 90% > 170,000

9

Ordering InformationSample Number: NAV-AA-01-E-UNV-T3-10K-AI-AP

Product Family Light EngineNumber of Light Squares 1 Driver Voltage Distribution Surge Protection

NAV=Navion LED AA= 1050mA, UL Class 2

01=102=203=304=406=6

E=Non-DimmingD= Dimming

UNV= Universal 120-277V

347=347V480=480V

T2= Type II AreaT3= Type III AreaT4= Type IV ShortSL2= Type II with Spill ControlSL3= Type III with Spill Control

SL4= Type IV with Spill ControlRW= Rectangular Wide5MQ= Type V Square Medium5WQ= Type V Square Wide5XQ= Type V Square Extra Wide

10K= Cooper 10kV Surge Module (Standard)

X= Driver Surge Protection Only 2

Additional Information

Compliances Technical Data (Electronic Driver)

EPA (Effective Projected Area - Square Feet)

Shipping Data (Approximate Net Weight)Number of Light Squares

Without Arm With Arm

UL and cUL Wet Location ListedIP66 Light Squares3G Vibration RatedARRA CompliantDLC Compliant*ISO 9001

+40°C Ambient Temperature Rating-40°C Ambient Temperature RatingOptional 50°C (HA) Ambient Temperature Rating0.9 Power Factor <20% Total Harmonic Distortion 120V-277V/50 and 60 Hz347V/60 Hz, 480V/60 Hz

1 Square2 Square’s3 Square’s4 Square’s6 Square’s

0.81.01.21.21.4

1.21.31.51.51.7

1 Square 17 lbs. (7.7 kgs.)2 Square 22 lbs. (10.0 kgs.)3 Square 26 lbs. (11.8 kgs.)4 Square 31 lbs. (14.1 kgs.)6 Square 36 lbs. (16.3 kgs.)

Dimensions

1, 2 or 3 Light Squares 1 Light Square

2 Light Squares

3 Light Squares

33-5/8" [854mm]

27-5/8" [701mm]

21-1/2" [546mm]8-7/8" [225mm]

5-7/32"[132mm]

4 or 6 Light Squares 4 Light Squares

6 Light Squares

33-5/8" [854mm]

27-5/8" [701mm]

5-7/32"[132mm]

15" [381mm]

Options (Add as Suffix) Color

AI= Arm Included 3

PER= NEMA Twistlock Photocontrol ReceptacleK=Level Indicator7060=70 CRI 6000K 4

8030=80 CRI 3000K 4

2L=Two Circuits 5

IP66=IP66 RatedHA=50°C High Ambient

LCF= Light Square Cover Plate Matches Housing Color MS-L08= On/Off Motion Sensor, Maximum 8' Mounting Height 6

MS-L20= On/Off Motion Sensor, 9'-20' Mounting Height 6

MS-L40= On/Off Motion Sensor, 21'-40' Mounting Height 6

MS/X-L08= Bi-Level Motion Sensor, Maximum 8' Mounting Height 7

MS/X-L20= Bi-Level Motion Sensor, 9'-20' Mounting Height 7

MS/X-L40= Bi-Level Motion Sensor, 21'-40' Mounting Height 7

AP= Grey (Standard)BZ= BronzeBK=BlackDP=Dark PlatinumGM=Graphite MetallicWH=White

Accessories (Order Separately)

OA/RA1016= NEMA Photocontrol - Multi-TapOA/RA1027= NEMA Photocontrol - 480VOA/RA1201=NEMA Photocontrol - 347VOA/RA1013=Photocontrol Shorting CapOA/RA1014=NEMA Photocontrol - 120VOA1223=10kV Surge Module ReplacementMA1010-XX=Single Tenon Adapter for 3-1/2" O.D. Tenon

MA1011-XX=2 @ 180° Tenon Adapter for 3-1/2" O.D. TenonMA1012-XX=3 @ 120° Tenon Adaptor for 3-1/2" O.D. TenonMA1013-XX=4 @ 90° Tenon Adapter for 3-1/2" O.D. TenonMA1014-XX=2 @ 90° Tenon Adapter for 3-1/2" O.D. TenonMA1015-XX=2 @ 120° Tenon Adapter for 3-1/2" O.D. TenonMA1016-XX=3 @ 90° Tenon Adapter for 3-1/2" O.D. Tenon

MA1017-XX=Single Tenon Adapter for 2-3/8" O.D. TenonMA1018-XX=2 @ 180° Tenon Adapter for 2-3/8" O.D. TenonMA1019-XX=3 @ 120° Tenon Adapter for 2-3/8" O.D. TenonMA1045-XX=4 @ 90° Tenon Adapter for 2-3/8" O.D. Tenon MA1048-XX=2 @ 90° Tenon Adapter for 2-3/8" O.D. TenonMA1049-XX=3 @ 90° Tenon Adapter for 2-3/8" O.D. Tenon

NOTES: 1 Standard 4000K CCT and nominal 70 CRI. 2 Consult factory for driver surge protection values. 3 22” upsweep arm. Round pole adapter and mounting hardware included, “M” drill pattern. 4 Consult factory for lead times and lumen multiplier. 5 Low-level output varies by number of light squares specified. Consult factory. Requires 2 or more light squares. No terminal block with 2L option. 6 Sensor mounted internally for 1, 2, 4 and 6 light square configurations. Sensor mounted externally 3 light square configuration. Consult factory for additional information. 7 Sensor mounted internally for 1, 2, 4 and 6 light square configurations. Sensor mounted externally 3 light square configuration. Factory set to 50% dimming of light output of all light squares after five minutes of inactivity. Available with “D” dimming driver only. Consult factory for additional information.

Lumen Multiplier

Ambient Temperature Lumen Multiplier

10°C 1.04

15°C 1.03

25°C 1.00

40°C 0.96

50°C 0.92

NOTE: Specification and dimensions subject to change without notice.

* www.designlights.org

Lumen Maintenance

Ambient Temperature

TM-21 Lumen Maintenance

(60,000 Hours)

Theoretical L70 (Hours)

25°C > 94% > 350,000

40°C > 93% > 250,000

50°C > 90% > 170,000

Arm Drilling Optional Arm

3/4" [19mm]Dia. Hole

(2) 5/8" [16mm]Dia. Holes

4-7/8" [124mm]

2-7/16" [62mm]

2-5/16"[59mm]

Type "M"

7"[178mm]

22" [559mm]

2-3/8"[60mm]

9-3/4"[246mm]

Rise 8" [203mm]

22" Upsweep Arm

10

The World of LED Innovation

Cooper Lighting’s Innovation Center boasts 60,000 square feet of the most advanced equipment and

brightest talent. The multi-million dollar facility is home to the research, development, design, validation,

and manufacturing of proprietary LED and other advanced lighting technologies. Teams of

highly-skilled mechanical, electrical, thermal, optical and reliability engineers work side-by-side

with industrial designers, lab technicians and manufacturing personnel to accelerate

the development and commercialization of industry-leading LED solutions.

Research and DevelopmentThe Research and Development Prototyping area houses world-class rapid prototype equipment and lean manufacturing work-cells to reliably deploy new advanced lighting technologies. The modernized rapid prototyping lab includes the latest milling and Computer Numeric Control equipment and an advanced quality lab for layout and validation.

Electrical and Optical LaboratoryCooper Lighting’s Certified Test Laboratory conducts extensive testing of electrical, optical and thermal properties for robustness in application and intended performance over rated life. The testing performed is capable of validating products to industry standards such as LM-79, LM-80, ENERGY-STAR® and UL. The Photometric Laboratory has received continuing National Voluntary Laboratory Accreditation Program (NVLAP) accreditation (NVLAP Lab Code 200050-0) for solid-state lighting (SSL) test methods in Energy Efficient Lighting Products.

Performance Testing LaboratoryCooper Lighting’s Reliability and Thermal Laboratory ensures our LED luminaires meet stated performance ratings over their lifetime. Our lab experts use the most advanced environmental and thermal mapping test equipment, along with rigorous testing protocol and statistical analysis tools, to ensure long-term performance of LED components, systems and finished luminaires.

Quality Testing and Assurance FacilityBy involving the Innovation Center operations team throughout the design process, utilizing tools like Failure Modes and Effects Analysis, we have optimized our manufacturing process and mitigated the risks of premature failure.

Our state-of-the-art Pilot Production area incorporates modular and transferable cell construction, a temperature and humidity controlled environment, and ESD protection for a well manufactured fixture each and every time.

Printed in USAADH121225

Cooper Lighting, Innovation you can rely on, Lumark and Navion are valuable trademarks of Cooper Industries in the United States and other countries. You are not permitted to use the Cooper Trademarks without the prior written consent of Cooper Industries.

25% PCRF

Cooper Industries plc600 Travis, Ste. 5600Houston, TX 77002-1001P: 713-209-8400www.cooperindustries.com

Cooper LightingHeadquarters1121 Highway 74 SouthPeachtree City, GA 30269

P: 770-486-4800www.cooperlighting.com

International SalesCooper Lighting1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800F: 770-486-4801

Canada SalesCooper Lighting5925 McLaughlin RoadMississauga, Ontario L5R 1B8P: 905-501-3000F: 905-501-3172

The Cooper Lighting FamilyHaloHalo CommercialPortfolioIRiSRSAMetaluxCoreliteNeo-RayFail-SafeMWSAmetrixShaperioLumarkMcGraw-EdisonInvueLumièreStreetworksAtLiteSure-Lites

Domestic Distribution FacilitiesCranbury, New JerseyElk Grove Village, IllinoisIrving, TexasBloomington, CaliforniaPeachtree City, Georgia

Canadian Distribution FacilitiesCalgary, Alberta T2E 7V9Mississauga, Ontario L5R 1B8

The Cooper Controls FamilyGreengateiLuminZero 88Fifth Light TechnologyiLight (International Only)