Industrial valves Ball valves l Actuator l Gate valves l Non-return valves l Y-strainers
coup
lings
fittin
gs
flang
es
valve
s
pipes
stainless steel
Butt welding fi ttings Threaded fi ttings Flanges Systems
Latest newsPrice list May 2018
Technical data online
Your will fi nd the current stock levels for all ofthe products in this brochure on our website, youalso being able to download datasheets from here as a PDF document and 3D models in Step format. A description of this is on page 16.
heco gmbh is a producer and reseller ofstainless steel fi ttings and valves.
Our products are used in machine and plant manufacturing, as well as in the chemical and food industries. With multiple locationsacross Europe, we are close to you no matter where you are on the.continent.
Remchingen - Berlin - Bielefeld - Frankfurt - NurembergWarschau - Brünn
Beverage fi ttings Installation supplies
1-piece ball valves with reduced bore 4
2-piece ball valves with full bore 4
3-piece ball valves with full bore 5
Ball valves with threaded ends 5
High pressure ball valves 6
Multi-way and fl anged end ball valves 7
Ball valves with electric actuators 8-9
Ball vaves with pneumatic actuators 10-11
Pneumatic ball valves check sheet 12
Globe valves and gate valves 13
Non-return valves and swing-check valves 14
Y-strainers 14
Drain cocks, control technology 15
Download of CAD and technical data sheets 16
Short names for industrial valves 17
hecoNNECT – low gap system 18
Industrial valves
stainless steel
Die Technischen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.de5
Die Technischen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.de4
K2.ECO K2. K2FR K2.IA
Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A)
Industrial valvesball valvesthreaded ends2-piece, full bore
2-piece ball valveF/F, economic
2-piece ball valve, F/Flocking device, DIN 3202 M3
2-piece ball valveF/F with spring return
2-piece ball valvewith F/M thread
You will fi nd the current stock levels and technical data on our homepage www.heco.de/en
3-piece ball valvebutt weld ends, economic
3-pc ball valve, butt weld endslocking device, DIN 3202 S13
3-pc ball valve butt weld endsTA-Luft, Fire-Safe Approved
orbital weld-on ball valveISO, 3-piece
K3.ESS K3.SS K3.PSS ORK3
Industrial valvesball valvesbutt weld ends
Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A)
3-piece ball valveEconomic
3-piece ball valve, F/Flocking device, DIN 3202 M3
3-piece ball valve, F/Fwith direct mounting pad
Industrial valvesball valvesthreaded ends3-piece, full bore
Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A)
K3.EIG K3.IG K3.PIG SV.
€/piece
9,209,60
10,7014,5021,9030,0037,0069,60
126,40182,50
PN
63636363636363636363
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
€/piece
14,0014,4016,1023,0031,8043,0061,0095,70
195,50289,30
PN
1301301301301306464644020
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
€/piece
27,00 27,8031,2045,9053,80
–––––
PN
130130130130130
–––––
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
€/piece
13,8014,0015,6022,4032,1044,4064,20
108,60–
PN
6363636363636363
––
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
€/piece
13,0013,6015,8023,2033,0041,0056,0085,00
157,00273,00475,00
PN
6363636363636363402016
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3G 4
€/piece
20,00
21,0021,8029,9037,4051,0077,00
109,00213,00311,00598,00
PN
6363636363636363402016
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3G 4
€/piece
46,6047,0048,5056,6076,60
100,70147,00199,00443,50563,70929,20
PN
6363636363636363636363
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3G 4
€/piece
15,9016,9017,3020,50
––––––
PN
63636363
––––––
Inch“
G 1/8G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
€/piece
16,6017,6018,1021,80
–––––
PN
63636363
––––––
Inch“
G 1/8G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
€/piece
7,007,909,90
12,3016,2020,4026,5037,00
–
PN
6464646464646464
––
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
€/piece
9,009,40
13,0015,60
––––––
PN
6464646464
–––––
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
mini-ball valvewith F/F thread
mini-ball valvewith F/M thread
1-piece ball valveF/F, economic
1-piece ball valve, F/Fwith butterfl y handle
Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A)
Industrial valvesball valvesthreaded ends1-piece, reduced bore
mm
13,517,221,326,933,742,448,360,376,188,9
114,3
Inch“1/43/81/23/4
111/4
11/2
221/2
34
PN
6363636363636363402016
€/piece
13,0013,6015,8023,2033,0041,0056,0085,00
157,00273,00475,00
mm
13,517,221,326,933,742,448,360,376,188,9
114,3
Inch“ 1/43/81/23/4
111/4
11/2
221/2
34
PN
6363636363636363402016
€/piece
20,00 21,00 21,80
29,90 37,40 51,00 77,00
109,00 213,00 311,00 598,00
mm
13,517,221,326,933,742,448,360,376,188,9
114,3
Inch“ 1/43/81/23/4
111/4
11/2
221/2
34
PN
6363636363636363636363
€/piece
46,4047,0048,5056,6076,60
100,70147,00199,00443,50563,70929,20
mm
13,517,221,326,933,742,448,360,376,188,9
114,3
Inch“ 1/43/81/23/4
111/4
11/2
221/2
34
PN
––636363636363–––
€/piece
––
35,7044,9065,8075,00
109,30142,80
–––
stainless steel
MINI.IG MINI.IA KU.ECO KUFG
€/piece
65,9065,9065,9065,9082,4082,40
119,80119,80238,00238,00238,00
for Inch“1/43/81/23/4
111/4
11/2
221/2
34
stem extensionfor K3DA and FKDA
CAD drawings for this article are available on our website. You will fi nd a description of the download on page 16.
Die Technischen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.de7
Die Technischen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.de6
BKHG K3HD K2HD.400 K3HD.400
Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A)
3-pc high pressure ball valvewith screwed ends
€/piece
144,90159,40186,90285,60388,60
–––––
PN
500500500315315
–––––
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
€/piece
69,8071,0077,9099,80
135,60163,00236,00370,00
––
PN
200200200200200200150150
––
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
€/piece
anfragenanfragenanfragenanfragenanfragenanfragenanfragenanfragen
––
PN
400400400400400400400400
––
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
€/piece
anfragenanfragenanfragenanfragenanfragenanfragenanfragenanfragen
–
PN
400400400400400400400400
––
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
stainless steel
3W. 3W. 4W.T 4W.L
3-way ball valveF/F with T-bore
3-way ball valveF/F with L-bore
Material 1.4408 (V4A) Material 1.4408 (V4A)
DN
1520253240506580
100125150200
wafer-type ball valve1-piece, full port
Material 1.4408 (V4A)
Inch“ 1/23/4
111/4
11/2
221/2
34568
PN
16/4016/4016/4016/4016/4016161616–––
€/piece
47,00
52,50 80,50
111,00 142,50 181,00 271,00 380,00 580,00
–––
DN
1520253240506580
100125150200
Inch“ 1/23/4
111/4
11/2
221/2
34568
PN
16/4016/4016/4016/4016/4016/40161616161616
€/piece
83,00
105,00 129,00 159,00 199,80 268,00 395,60 533,00 749,00
1.500,00 2.100,002.900,00
DN
1520253240506580
100125150200
Inch“ 1/23/4
111/4
11/2
221/2
34568
PN
––40404040161616–––
€/piece
––
166,00216,60269,40366,40524,40715,00
1.025,00–––
DN
1520253240506580
100125150200
Inch“ 1/23/4
111/4
11/2
221/2
34568
PN
––16161616161616–––
€/piece
–––––
797,001.136,401.466,602.290,00
––
Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A)
2-pc fl anged end ball valveDIN 3202 / EN 5581
2-pc fl anged end ball valveTA-Luft, Fire-Safe Approved
3-way fl anged end ball valvewith T- or L-bore
KK. FK. FK.PRO 3WFK
Industrial valvesball valvesthreaded ends
Industrial valvesball valvesfl anged ends
You will fi nd the current stock levels and technical data on our homepage www.heco.de/en
€/piece
43,0045,0048,0065,0087,00
117,00165,00257,00385,00751,40
PN
63636363636363636363
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
€/piece
43,0045,0048,0065,0087,00
117,00165,00257,00385,00751,40
PN
63636363636363636363
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
€/piece
––
anfragenanfragenanfragenanfragenanfragenanfragenanfragenanfragen
PN
––
6363636363636363
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
€/piece
––
anfragenanfragenanfragenanfragenanfragenanfragenanfragenanfragen
PN
––
6363636363636363
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
4-way ball valveF/F with T-bore
4-way ball valveF/F with L-bore
2-pc high pressure ball valvewith screwed ends
3-pc high pressure ball valvewith screwed ends
Industrial valvesball valvesthreaded endshigh pressure
CAD drawings for this article are available on our website. You will fi nd a description of the download on page 16.
Material 1.4408 (V4A) Material 1.4408 (V4A)
high pressure block ball valve with screwed ends
Die Technischen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.de9
Die Technischen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.de8
stainless steel
electricactuator
2-pc ball valve, F/F with electric actuator
3-pc ball valve, F/Fwith electric actuator
3-pc ball valve, but weld endswith electric actuator
EANT K2EA K3EA.IG K3EA.SS
Nm
1020355585
140300
€/piece
231,80331,20393,40524,40683,00897,00966,00
Inch“
G 1/4G 3/8G 1/2G 3/4
G 1G 11/4
G 11/2
G 2G 21/2
G 3G 4
€/piece
299,70299,90300,50407,30426,20505,50672,20878,20
–––
PN
6363636363636363
–––
Inch“
G 1/4G 3/8G 1/2G 3/4
G 1G 11/4
G 11/2
G 2G 21/2
G 3G 4
€/piece
300,40301,60303,60389,00402,40508,00546,80713,00987,80
1.370,001.980,00
PN
6363636363636363636363
Inch“1/43/81/23/4
111/4
11/2
221/2
34
€/piece
300,40301,60303,60389,00402,40508,00546,80713,00987,80
1.370,001.980,00
PN
6363636363636363636363
mm
13,517,221,326,933,742,448,360,376,188,9
114,3
Material Polyamid Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A)
Industrial valvesball valveswith actuatorelectric
Material 1.4408 (V4A)
FKEA
3-way ball valve, F/Fwith EA, T- or L-bore
3WEA
Inch“
G 1/4G 3/8
G 1/2G 3/4
G 1G 11/4
G 11/2
G 2G 21/2
G 3G 4
€/piece
342,80342,80345,20438,20488,40667,00886,80
1.115,00–––
PN
6363636363636363
–––
2-pc fl anged end ball valvewith electric actuator
KKEA
Industrial valvesball valveswith actuatorelectric
You will fi nd the current stock levels and technical data on our homepage www.heco.de/en
Electric actuatorAn electric actuator is used to automatically open and close a ball valve. The robust polyamide housing, a pro-tection class up to IP67, and the two voltage ranges make the electric actuator a simple alternative to pneumaticactuators.
The main differences between it and a actuator are sure-ly the slower switching speed, lower switching frequency(standardised according to DIN EN 15714-2) and the poly-amide housing.
The electric actuators in this series are not explosionprotected.
Backup battery packThe backup battery pack is installed in the actuator and can-not be seen from the outside. It serves to move the actuator to a safety position (open/ closed) in case of a power failure.
It is not suitable for use as a continuous power supply.
Positioning systemAlso not visible from the outside. The positioning system converts the actuator into a controlled valve controller. Using the input signal, it is possible to select a position anywhere in the swivel range.
A ball valve is not a control valve.
Manual override
Position indicator
Curcuit
Ratings plate
Operating light
End position
Power plug
Emergency switch
Multifl ange acc. to
DIN 3337/ISO 5211
Scope of delivery
The position indicator, the manual override, and an integra-ted end position feedback are standard.
Interface
All actuators have an interface according to ISO 5211/DIN 3337 and can be mounted directly on a valve or using a mounting bracket and the corresponding adapter piece.
DN
1520253240506580
100125150200
€/piece
517,40543,60552,80689,00755,00991,80
1.231,601.853,602.220,40
–––
PN
161616161616161616
–––
wafer-type ball valve with electric actuator
Material 1.4408 (V4A) Material 1.4408 (V4A)
€/piece
344,80366,80552,40582,40623,20822,40950,00
1.460,001.676,00request request
PN
404040404040161616161616
Inch“1/23/4
111/4
11/2
221/2
34568
DN
1520253240506580
100125150200
You will fi nd the current stock levels and technical data on our homepage www.heco.de/en
PALL PALF K2LL / K2LF K3LL-IG / K3LF-IG
Die Technischen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.de11
Die Techni-schen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.de10
Pneumatic actuatorThe aluminium housing with high quality components,together with the ball valve made of stainless steel, makes the pneumatic actuator an extremely robust, unifi ed whole.
The advantages of the pneumatic actuators are mainly found in their simple construction and handling. In addition to their switching speed, their strengths also lie in their repetition rate and the extremely high switching frequency (standar-dised in DIN EN 15714-3)
Interface
According to ISO 5211/DIN 3337 – see electric actuator
Position transmittersUsing position transmitters, it is possible to display the end position visually and transmit it electronically. The transmit-ter boxes are also mounted on the appropriate interface on the top of the actuator in accordance with VDE/VDI 3845. The fulfi lment of ATEX requirements for various areas is therefore guaranteed using inductive sensors in the box or using certain types of housings.
Solenoid valvesSolenoid valves can be used for control purposes. They can be mounted directly on the actuator using a standardised VDE/VDI 3845 or Namur interface. Solenoid valves designed according to the ATEX guidelines are also available for vari-ous areas.
Single actingair/spring
Double-acting (Air/Air)
Two separate air chambers are used, one is fi lled with com-pressed air while the other is emptied. The corresponding motion of the piston generated is transferred by a rack and pinion to the shaft, which then turns the stem in the valve.
Single-acting (Air/Spring)
In contrast to the double-acting design, only one chamber is fi lled with air and can generate motion of the piston. When vented, the springs built into the actuator move the piston in the opposite direction.
For low or high temperature applications as well as for rough ambient conditions, the actuators are also available withdifferent seals and surface coatings.
Position indicators
Adjusting cams
Double actingair/air
Industrial valvesball valveswith actuatorpneumatic
€/K2LF
191,10191,30191,90219,80282,20351,20453,30594,90
––
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3G 4
€/K2LL
164,50164,70165,30172,70191,60226,80295,10342,50
–––
PN
6363636363636363
–––
€/K3LF
191,80193,00195,00222,20235,60301,80392,60494,00868,80
1.348,201.616,20
Inch“
Rp 1/4Rp 3/8Rp 1/2Rp 3/4Rp 1Rp 11/4
Rp 11/2
Rp 2Rp 21/2
Rp 3Rp 4
€/K3LL
165,20166,40168,40175,20188,60229,40268,20335,80623,60716,60
1.080,00
PN
6363636363636363636363
€/piece
96,60114,70147,30190,80243,90321,20386,40652,10
Nm / 6 bar* €/piece
123,20143,70187,20239,10305,50399,70489,00875,40
8,514,128,535,764,6
100,9129,8283,8
Nm / 6 bar*
€/K3LF
191,80193,00195,00222,20235,60301,80392,60494,00868,80
1.348,201.616,20
mm
13,517,221,326,933,742,448,360,376,188,9
114,3
€/K3LL
165,20166,40168,40175,20188,60229,40268,20335,80623,60716,60
1.080,00
PN
6363636363636363636363
20,135,570,6
103,4164,8262,3339,8689,2
*Caution: Torque ratings for 6 bar of control pressure only!
pneumatic actuatoropened and closed by air
3-pc ball valve, butt weld endswith pneumatic actuator
3-pc ball valve, F/F with pneumatic actuator
pneumatic actuatoropened by air /closed by springs
2-pc ball valve, F/F with pneumatic actuator
Material Aluminium Material Aluminium Material 1.4408 (V4A) Material 1.4408 (V4A)
Material 1.4408 (V4A) Material 1.4408 (V4A)
K3LL / K3LF
€/KKLF
350,60376,80400,60484,00605,50780,60
1.020,401.356,202.142,60
–––
DN
1520253240506580
100125150200
€/KKLL
303,60329,70303,80410,40476,40614,60854,60
1.139,601.567,30
–––
PN
161616161616161616
–––
wafer-type ball valve with pneumatic actuator
KKLL / KKLF
€/FKLF
256,70278,70346,20376,20468,90603,50731,10
1.052,001.268,00requestrequestrequest
DN
1520253240506580
100125150200
€/FKLL
209,60231,60273,70303,70344,50445,30572,90806,90
1.022,90requestrequestrequest
PN
404040404040161616161616
2-pc fl anged end ball valve with pneumatic actuator
Material 1.4408 (V4A)
FKLL / FKLF
€/3WLF
232,20232,20234,60277,30366,30462,00601,50903,80
–––
Inch“
G 1/4
G 3/8
G 1/2
G 3/4
G 1G 11/4
G 11/2
G 2G 21/2
G 3G 4
€/3WLL
205,60205,60208,00228,30269,50462,00601,60903,80
–––
PN
6363636363636363
–––
3-way ball valve, F/F with pneumatic actuator
Material 1.4408 (V4A)
3WLL / 3WLF
Industrial valvesball valveswith actuatorpneumatic
stainless steel
PALL PALF K2LL / K2LF K3LL / K3LF
Interface according to
Namur – VDE/VDI 3845
CAD drawings for this article are available on our website. You will fi nd a description of the download on page 16.
Die Technischen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.de13
Die Technischen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.de12
Industrial valvesglobe valves
Needle valvewith F/F thread
globe valve angle seat valve globe valve fl anged end acc. to DIN 2633
stainless steel
NV. MV. MV.S FLAV
Inch“
G 1/8G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
PN
400400400400400400––––
€/piece
28,00 31,20 32,40 42,80 54,10
134,40 ––––
DN
506580
100125150200
Inch“
221/2
34568
PN
16161616161616
€/piece
371,00479,80
650,00 890,00
1.398,00 1.877,00 3.700,00
Inch“
G 1/8G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
PN
–1616161616161616
–
€/piece
29,80 30,80 31,80 35,00 42,3059,9072,0089,80
–
Inch“
R 1/8R 1/4R 3/8R 1/2R 3/4Rp 1Rp 11/4
Rp 11/2
Rp 2Rp 21/2
PN
–1616161616161616
–
€/piece
32,70 33,20 34,0040,8054,9071,80 87,60130,00
–
PN
161616161616161616161616
€/piece
199,00 220,00 255,00 338,00 358,00 420,00 510,00 770,00
1.050,00 1.577,00 1.770,003.300,00
Inch“1/2
3/4
111/4
11/2
221/2
34568
DN
1520253240506580
100125150200
PN
161616161616––––––
€/piece
33,00 36,00 46,20 58,40 73,00
93,00––––––
Inch“
G 1/2
G 3/4
G 1G 11/4
G 11/2
G 2G 21/2
G 3G 4G 5G 6G 8
Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A)
Industrial valvesgate valves
gate valvewith F/F thread
gate valve fl anged end
MS. FLAS Inlet pipe
Material 1.4408 (V4A) Material 1.4408 (V4A)
Pneumatic ball valves check sheet
CAD drawings for this article are available on our website. You will fi nd a description of the download on page 16.
Connection type:
Screwed end Weld end Flange end
Design/ type model:
2-piece 3-piece 1-piece
3-piece 2-piece
3-piece
2-way
3-way T-bore L-bore
Seal (seat/ o-ring):
Standard: PTFE / FKM (TA-air)
optional: PTFE / PTFE
Medium:
lubricating abrasive crystallizing
Temperature: °C max.
Operating pressure: bar
Actuator:
Control air: Standard (6 bar)
Deviating bar
double-acting
single-acting N/C* N/O*
Switching frequency:
x per hour x per day
x per week occasionally
Solenoid valve:
Yes No
24V AC 24V DC 230V AC Default J+ J (other available upon request)
Position detector:
Yes No
Plasstic (Standard Makrolon / ATEX Latiohm)
Aluminium
mechanical
inductive 2-conductor 3-conductor
(Ball valve with anti-static device)
Default(II 2GD c Tmax = 95 °C)
Zone 1
Zone 2
ATEX
* N/C = normally closed / N/O = normally open
The entire unit is also available in a version designed according to the ATEX guidelines. Please specify theATEX requirements when ordering.
Die Technischen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.de15
Die Technischen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.de14
PN
16161616161616161616
€/piece
request 199,80
210,00 298,00 420,00 550,00 770,00
1.158,00 1.650,002.500,00
Inch“
111/4
11/2
221/2
34568
DN
253240506580
100125150200
Inch“
G 1/4
G 3/8
G 1/2
G 3/4
G 1G 11/4
G 11/2
G 2G 21/2
G 3
PN
4040404040404040
––
€/piece
25,9026,4027,0032,6053,0073,7089,90
131,00––
DN
506580
100125150200
PN
40404040404040
€/piece
85,80 130,00178,00217,00338,00530,00950,00
Inch“
G 1/4
G 3/8
G 1/2
G 3/4
G 1G 11/4
G 11/2
G 2G 21/2
G 3
PN
40404040404040404040
€/piece
17,8018,3018,8022,6035,6041,5059,90 89,00183,00258,00
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
PN
16161616161616161616
€/piece
28,5028,5024,3027,9037,00 49,8069,0079,80
199,90319,00
PN
161616161616161616161616
€/piece
115,00 130,00 166,80 247,80 259,80 314,50 428,80 533,60 838,00
1.198,00 1.540,00 2.700,00
Inch“
1/23/4
111/4
11/2
221/2
34568
DN
1520253240506580
100125150200
DN
1520253240506580
100125150200
PN
–––––
16161616161616
€/piece
–––––
199,00238,00258,00318,00390,00518,00758,00
DN
1520253240506580
100125150200
PN
–––––
1616161616
€/piece
–––––
request requestrequestrequestrequest
––
Inch“
G 1/4
G 3/8
G 1/2
G 3/4
G 1G 11/4
G 11/2
G 2G 21/2
G 3
PN
66666–––––
€/piece
74,7073,2092,20
141,70185,20
–––––
Inch“
G 1/4
G 3/8
G 1/2
G 3/4
G 1G 11/4
G 11/2
G 2G 21/2
G 3
PN
––
161616
––––
€/piece
––
23,2027,9033,60
–––––
Inch“
G 1/4
G 3/8
G 1/2
G 3/4
G 1G 11/4
G 11/2
G 2G 21/2
G 3
PN
––
400–––––––
€/piece
– –
request––––––
Inch“
G 1/4G 3/8G 1/2G 3/4G 1G 11/4
G 11/2
G 2G 21/2
G 3
PN
66
16–––––––
€/piece
118,00118,00127,00
–––––––
non-return valvewith F/F thread
wafer disc non-return valve
Y-strainerwith F/F thread
Y-strainer fl anged end acc. DIN 2633
Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A)
Industrial valvesY-strainerIndustrial valvesnon-return valvesnon-return valves
RV. RVZF SF. SFFL
RÜ. RÜFL RÜZF RÜDF
Industrial valvesnon-return valvesswing-check valves
swing-check valve with F/F thread
swing-check valvefl anged end
wafer disc swing-check valve
double-fl ap swing-check valve
Material 1.4408 (V4A) Material 1.4408 (V4A) Material 1.4408 (V4A)
You will fi nd the current stock levels and technical data on our homepage www.heco.de/en
Industrial valvesdrain cocks
AH. AH.K
drain cock with bent outlet
bibcock ball valve
Material 1.4571 Material 1.4408 (V4A)
MMAV MMAH
pressure gauge valveDIN 16270
pressure gauge cockDIN 16261
Industrial valvescontrol technology
Material 1.4571 Material 1.4571
CAD drawings for this article are available on our website. You will fi nd a description of the download on page 16.
Material 1.4408 (V4A)
stainless steel
Die Technischen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.de17
Die Technischen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.deDie Technischen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.de
16
stainless steel
The fastest and most direct way is by using our abbreviated article designations . After you have entered a term in the Search box on our website, you are directly forwarded to the article without you having to use the navigation.
You are able to see the current stock level under “stocks and pricing” If you are logged into our myheco customer portal, you can also see the prices here.
You will fi nd the technical data under “measures and values”. A technical datasheet can be down-loaded at the end of the table .
The 3D models in Step format are stored under the category „CAD“ .
Retrieving and downloading the technical data and 3D models
extended product description
material
measures and values
stocks and pricing
downloads
CAD
ask our experts
3-piece ball valve DIN 3202 M3 K3.IG
Short names
You will fi nd all of the short names on page 17.
full text
article number
Aangle seat valve MV.S
Bbibcock ball valve AH.Kball valve, 1-piece F/F economic KU.ECOball valve, 1-piece F/F, butterfl y handle KUFG ball valve, 2-piece F/F locking device K2. ball valve, 2-piece F/F economic K2.ECO ball valve, 2-piece F/M K2.IA ball valve, 2-piece, butterfl y handle K2FG ball valve, 2-piece F/F spring return K2FR ball valve, 2-piece F/F electric actuator K2EA ball valve, 2-piece full bore K2L ball vave, 2-piece with TA-air K2.PRO ball valve, 3-piece butt weld ends, locking device K3.SS ball valve, 3-piece butt weld ends, economic K3.ESS ball valve, 3-piece butt weld ends, TA-air K3.PSS ball valve, 3-piece F/F locking device K3.IG ball valve, 3-piece economic K3.EIG ball valve, 3-piece F/F direct mounting pad K3.PIG ball valve, 3-piece electric actuator K3EA ball valve, 3-piece, pneumatic actuator K3L ball valve, 3-way 3W.ball valve, 3-way pneumatic actuator 3WL ball valve, 4-way 4W.
Ddouble-fl ap swing-check valve RÜDF drain cock, bent outlet AH. drain cock with cone end AH.PS
Eelectric actuator EANT
Ffl anged end ball valve, 2-piece FK. fl anged end ball valve, 2-piece electric actuator FKEA fl anged end ball valve, 2-pc pneumatic actuator FKL fl anged end ball valve, 2-piece TA-Luft FK.PRO fl anged end ball valve, 3-piece F3. fl anged end ball valve, 3-way T-/L-bore 3WFK
Ggate valve fl anged end FLASgate valve F/F MS.globe vlave fl anged end FLAVglobe valve MV.
Hhigh pressure block ball valve, screwed ends BKHGhigh pressure ball valve, 3-piece, screwed ends K3HD
Mmini-ball valve F/F MINI.IG mini-ball valve F/M MINI.IA
Nneedle valve F/F NV.non-return valve F/F RV.
Oorbital weld-on ball valve, 3-piece ORK3
Ppneumatic actuator PALpressure gauge cock MMAH pressure gauge valve MMAV
Sstem extension SVswing-check valve F/F RÜ. swing-check valve fl anged end RÜFL
Wwafer disc non-return valve RVZF wafer disc swing-check valve RÜZFwafer-type ball valve, 1-piece full port KK. wafer-type ball valve, electric actuator KKEA wafer-type ball valve KKL
YY-strainer F/F SF. Y-strainer fl anged end SFFL
hecoNNECT – low gap system
Due to our CAD department and our in-house production, we are the ideal partner for special ball valve solutions. The areas of application include, among other, the chemical industry and painting plant technology.
From the production of drawings to production monitoring and subsequent pressure and function testa, we can manu-facture high quality custom ball valves designed according to the requirements and application.
Die Technischen Daten sowie die aktuellen Bestände und Preise fi nden Sie im Internet unter www.heco.de18
hecoNNECT is our own development for low gap connections.
We manufacture the valve ourselves, from the seal to the housing.
After assembly, every ball valve is subjected to a function and pressure test.
3-way and 4-way
L-, T- or X-bore
low clearance
connections available with optionalcutting ring oder female threads
tainless steel handle
seals made of PTFE (silicone-free)
with ISO top acc. ISO 5211
optionally available withfi lter inserts
Other ball valves and fi ttings for painting technology are described in more detail in our seperate hecoNNECT brochureand on our website.
heco gmbhAm Eisengraben 575196 RemchingenTel. +49 7232 36 55-0Fax +49 7232 72 [email protected]
heco gmbh NL BerlinKöpenicker Straße 19-2012524 BerlinTel. +49 30 68 838 143-0Fax +49 30 68 838 [email protected]
heco gmbh NL BielefeldBahnhofstraße 4833602 BielefeldTel. +49 521 944 175-0Fax +49 521 944 [email protected]
heco gmbh NL FrankfurtSenefelderstraße 1K63110 RodgauTel. +49 6106 28 522-0Fax +49 6106 28 [email protected]
heco gmbh NL NürnbergPretzfelder Straße 1590425 NürnbergTel. +49 911 93 772-0Fax +49 911 93 [email protected]
heco Sp. z o. o.Al. Jerozolimskie 42705 800 Pruszków Tel. +48 22 7530 720Fax +48 22 7530 [email protected]
heco nerez s.r.o.Technická 15616 00 BrnoTel. +420 545 211 196Fax +420 547 211 [email protected]
D-1000/0518 www.heco.de/en