-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 1 of 19
ARMSS
(AUTOMATED RAW MATERIAL STORAGE SYSTEM)
Project Name ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Description
ARMSS is a custom software for tracking the inventory of
goods, receiving and issuing of raw material from suppliers
and to production respectively, generating various reports
like inventory, receipt, issues etc.
Front End
(Design &
Development)
Visual Basic .Net 2008
Back End
(Database
Storage)
SQL Server 2005
Windows
Operating
System
Windows XP Service Pack 3
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 2 of 19
STARTUP FORM
This is the startup screen of the ARMSS Software
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 3 of 19
Login Screen for ARMSS Software
Username - admin
Password - pass
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 4 of 19
MAIN SCREEN
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 5 of 19
ITEM CREATION
In this screen User can Create or Update new ITEMS.
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 6 of 19
VENDOR CREATION
In this screen User can Create or Update Vendors.
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 7 of 19
USER CREATION
In this screen User can create new User for working in the ARMSS
software. There can be 2 levels of Users (Administrator or USER)
which can be created using Type Field. After
entering username, password and type MRF Users have to select
those forms which they dont want the users to access. Included and
Excluded forms can be seen if the user
name is clicked.
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 8 of 19
MASTER SPECIFICATION
This screen is used to enter the master specification of an item
and its vendor. After entering the entire necessary details user
will SAVE the record which further will be shown in
the GRID below. Using the ITEM CODE user can search for an item
specification and update any details if required.
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 9 of 19
PALLET PALLET STATUS
This form has four tabs that is related to Pallet and Barcode
details. The PALLET STATUS Tab will let user to search GRN Nos that
are in OK status and if manually MRF wants to
change the status of a Pallet to other Status can be done from
here. User needs to Select the required Status from here for a
Barcode and click UPDATE button.
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 10 of 19
PALLET TRACKING TROUBLESHOOTING
This form lets manually change the Pallet Status as some problem
comes if the network between ARMSS and PLC fails. For Ex if at the
time of OVER done from Issue Station the
request is not received by ARMSS at that point of time, the
pallet moves to its original location but in ARMSS it still shows
it is loaded. So to make the Pallet empty User will enter
the Pallet ID and click Pallet Data Clear button. Likewise a
Pallet can be loaded by entering the pallet data fill details. If a
GRN is send to PLC but the GRN doesnt starts then it can
be manually erased from the ARMSS GRN Screen by entering the GRN
NO and click RESET Button.
BARCODE DETAILS
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 11 of 19
In this screen User can view a Child Barcodes History, like the
GRN No, the Insepection Lot No and Status and the no of Issues from
the childbarcode (Parital Issues). For ex this
childbarcode have been issued 5 times.
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 12 of 19
PALLET RAW MATERIAL UTILIZATION REPORT
This is a gist of the no of pallets present in each row and on
clicking a row no user can get the details of what palletids and
barcodes are present in that row.
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 13 of 19
LOCATION MASTER
The form is used to create a New Location Assignment for a
Itemcode.
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 14 of 19
PACKING MASTER
This is a master entry screen for the Packing Types.
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 15 of 19
GRN CREATION
In this screen GRN Data comes from SAP. When a New GRN is
created in the SAP system using the SAP to SQL Connectivity the GRN
Data flows to a Table in SQL Server (MRF Site)
from which the GRN Nos are shown here. When a User Clicks a GRN
the GRN Details is shown in this GRID. Select the GRN Details will
search for the valid Item Code and Vendor
Code in the Master Specification Table and show the details
below. If in the GRN Details Vendor Code is Blank user will have to
select the Vendor Code from this combo Box and
the details will flow respectively. Click on the SAVE button to
save the GRN, automatically data will flow to PLC with the Row ID
and no of empty pallets that are needed to load.
On clicking SAVE a GRN Details screen will open which will show
the Pallet ID and the actual weight that is stored in the pallet
and will close automatically when the GRN is Over.
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 16 of 19
ISSUE FORM
This form is used to generate Issues from the ARMSS system which
when completed will flow to the SAP system. Here user will enter a
Issue first to generate a Issue No, then
after entering all the Issue required User will click Insert and
then Progress Button respectively. This will save the Issues
generated in the system database. Clicking Station Button
will actually start the Issue where the Pallet ID and Row No
will be send to the PLC system, which will send the particular
pallet to the Issue station based on the Station Priority
Logic created in ARMSS. When the Issue is over the data is send
back from PLC system to ARMSS and the palletid is removed from the
Issue Queue.
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 17 of 19
INVENTORY DETAILS
In this screen user can get the details of the Inventory in the
system Item Code wise.
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 18 of 19
BARCODE CALLING NON AC
This screen is used to call a Pallet to the unloading station
based on the users request to collect sample.
LIKEWISE Project, Reject and Return of Goods Receipts forms also
operates.
-
ARMSS AUTOMATED RAW MATERIAL STORAGE SYSTEM
Page 19 of 19
LOCATION UPDATE
This screen updates the ITEM CODEs rows. Before changing a ROW
from one ITEM Code to other ITEM CODE, remember to swap both nos,
for ex ITEM CODE M2306 is assigned to
ROWs 3,9 and 10 and ITEM CODE M2304 is assigned to ROW 6 and 11
and for time being you need to Store ITEM CODE M2304 in ROW 10
(which is already assigned to M2304),
then you need to update M2304 ROW1 = 6, ROW2 = 10, ROW3 = 11 and
M2306 ROW1=3, ROW2 = 6 and ROW3 = 0.
BEFORE
AFTER
