Arte-MR16 Spotlight - MR-16 LED/Halogen

Category: The Arte-MR-16 micro Spotlight was engineered for sophisticated applications such as galleries, retail, museums and high end residential projects. It features a highly engineered, architectural and compact profile made of machined aluminum with a beautiful brushed finish. It also includes a specially designed flush media holder and aiming tab with 360° rotation that can accommodate up to three lenses and/or louvers. Arte-MR-16 is part of a family of compact Spotlights that offer unique architectural styling for the newest lamp technology.

Spotlight: Arte-MR-16.

Material: Machined aluminum.

Finish: Brushed Aluminum (AL), Black (BLK), or White (WH).

Systems: Arte-MR-16 is supplied with one of Tegan’s versatile connectors that will enable easy connection to the full range of Systems and Monopoints; Refer to System Spec Sheets and Installation Sheets for more detail: Centro Trac System (CTS), Retrac System (RTS), Duplex Cable System (DCS), Monopoint Surface - Integral Driver (MPS-ID), Monopoint Recessed Flat Plate - Remote Power Supply (MPRFP-RP), Monopoint Recessed Trimless - Remote Power Supply (MRTL-RP), Monopoint Panel Mount - Remote Power Supply (MPPM-RP), Single Recessed Enclosure Monopoint (MP- 1-RE), Double Recessed Enclosure Monopoint (MP-2-RE).

Connectors: Connectors are used with Spotlight as specified (Spot connector is specified separately). Centro Trac 90° Connector (C90C), Centro Trac Connector (CTC), Retrac Connector (RTCN), Monopoint - No Connector required (MP).

Adjustment: Spotlight has a smooth, locking 360° bearing rotation with 90° locking vertical adjustment. Integral Media Holder rotates 360° with an aiming tab.

Source: One 50W MR-16,12VAC (GU5.3 Bi-Pin) or LED 12VAC MR-16 lamp. Lamps supplied by others. Note that all LED MR16 lamps (Cree, Soraa, etc.) are rated for different operating conditions as per the lamp manufacturer. In addition, since these lamps are new technology; they are subject to frequent changes in recommended operating conditions and/or Spot compatibility. Please carefully check to ensure the lamp specified is rated to be compatible with the selected Tegan Spot. Contact factory to order LED lamps. For dimming LED MR-16 lamps (Soraa) with 12VAC transformers, please refer to page 3 of our MR-16 LED Specsheet.

Power Supply: Refer to 12VAC Electronic Transformer Specsheet or 12VAC Magnetic Transformer Specsheet for Power Supply options.

Installation: For system layout, and specification assistance, refer to the Trac Design Guide under the Gallery link.

Accessories: Arte-MR-16 Media Holder X 3 (AMRMHx3), Arte-MR-16 Honeycomb Louver 16 - Black (AMRHCLB-16), Arte-MR-16 Prismatic Lens 16 (AMRPL-16), Arte-MR-16 Sandblasted Lens 16 (AMRSBL-16), Arte-MR-16 Linear Spread Lens 16 (AMRLSL-16), Arte-MR-16 Softening Lens 16 (AMRSFL-16), Arte MR-16 Solite Lens (AMRSOL-16). Arte-MR-16 Wall Wash Kicker Reflector (AMRWWK). UV lenses - Contact factory. 72” Spot Extension (SpotExt72), 72” Double Spot Extension (DSpotExt72).

Labels: ETL & CE Listed; Tested to UL 1574 - Issue: 2004/09/07 Ed: 3 Rev:2012/01/25 UL Standard for Safety Track Lighting Systems. IP20. Interior use only. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on teganlighting.com are the most recent version and supersede all other versions that exist in any other printed or electronic form. 3 Year Warranty.

teganlighting.com • info@teganlighting.com • (415) 504-3565 • TG21 7/26/17 1

90˚ 360˚Available

AccessoriesIP

HALOGEN

MR-16 LED

Tegan Spotlight Source3 Finish2 System1,2System

Connectors1,2 Accessories

TG Arte-MR-16 MR16

CTSRTSDCSMPS - ITMPRFP - RPMRTL - RPMPPM - RP

C90C(Centro only)

CTC(Centro only)

RTCN(Retrac only)

DCC(Duplex only)

MP(No connector)

AMRHCLB - 16AMRPL - 16AARSBL - 16AMRLSL - 16AMRSFL - 16AMRSOL - 16AMRWWK - AL, BLK, or WH4

SpotExt72 - AL, BLK, or WH4

DSpotExt72 - AL, BLK, or WH4

Example: TG - Arte - MR-16 - AL - CTS - C90C - PL16

_ _ _ _ _ _

Arte-MR16 - Spotlight

CLICK

TWIST

The Twist & Click system allows the Spotlights to be easily removed. The Spotlights click into the jack plug socket, the threaded jacket then screws into position to lock the connection in place. Once fixed, the luminaires are free to rotate or can be secured using two locking pins. Supplied separately.

Twist & Click System

The Arte-MR-16 micro Spotlight includes a specially designed flush media holder and aiming tab with 360° rotation that can accommodate up to three lenses and/or louvers. Aluminum (AL), White (WH), or Black (BLK) finish options.

Note:1 System Connectors are required and they are supplied separately as specified in this catalog number. Monopoints do not require connectors. Trac, Cable, Monopoints, and Power Supply(s) are to be specified separately. Refer to linked Spec Sheets on page 1.2 Select one. Specified separately.3 Contact factory to order MR-16 LED lamps. Other LED MR-16 lamp or Halogen, by others. 4 See “Arte-MR-16 - Accessories” on following page for optional Spot Extension details.

Arte-MR16(Arte-MR16)

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG21 7/26/17 2

AL BLKWH

Arte-MR16 Spotlight - MR-16 LED/Halogen

The Arte-MR-16; Aluminum finish (AL),side view.

The Arte-MR-16; Aluminum finish (AL),rear view.

The Arte-MR-16; side view with Wall Wash Kicker Reflector Accessory (AMRWWK). Reflector finish options: Aluminum (AL), White (WH), or Black (BLK).

76mm(3”)

150mm(5 -7/8”)

72mm(2 -3/16”)

1/8” Hexcell black metal. Controls spill illumination and glare.

Creates a symmetrical broadening of the lamp beam.

Arte-MR-16 - Accessories

ø50mm(2”)

ø50mm(2”)

Connector for Duplex Cable System. Brushed Aluminum (AL) finish. Supplied separately as specified.

Connector for Retrac System. Brushed Aluminum (AL) finish. Supplied separately as specified.

Retrac Connector (RTCN-AL)

Arte-MR-16 Honeycomb Louver 16 (AMRHCLB-16)

Duplex Cable Connector (DCC-AL)

Arte-MR-16 Prismatic Lens 16 (AMRPL - 16)

Creates an uniform beam pattern that is useful for wall washing.

Will extend the lamp’s beam along one axis, allowing hightlighting of wider areas from a single fixture.

Smooths and widens irregular beam pattern.

ø50mm(2”)

ø50mm(2”)

ø50mm(2”)

Arte-MR-16 Sandblasted Lens 16 (AMRSBL - 16)

Arte-MR-16 Linear Spread Lens 16 (AMRLSL - 16)

Arte-MR-16 Softening Lens 16 (AMRSFL - 16)

22

102

22mm(7/8”)

102mm(4”)

Tempered glass with a stipple effect that that pro-vides obscurity while retaining high transmission values. This low-iron optically clear glass offers maximum transmission and minimal absorption.

ø50mm(2”)

Arte-MR-16 Solite Lens 16 (AMRSOL - 16)

Arte-MR16 Spotlight - MR-16 LED/Halogen

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG21 7/26/17 3

Arte-MR16 - System Connectors

ø19mm(3/4”)

25mm(1”)

ø19mm(3/4”)

25mm(1”)

25mm (1”)

ø19mm (3/4”)

ø19mm(3/4”)

25mm(1”)

Centro Trac Connector (CTC) Centro 90° Connector (C90C)

Connector for Centro Trac system. Brushed Aluminum (AL) finish. Supplied separately as specified.

Connector for Centro Trac System. Brushed Aluminum (AL) finish. 90º Mounting. Supplied separately as specified.

ø28mm(1 1/8”)

17mm(11/16”)

13mm(1/2”)bottom of

Retrac

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG21 7/26/17 4

Arte-MR16 Spotlight - MR-16 LED/Halogen

Connector Spot Extension that attaches to any system to extend the Spot 72” from the System Connector. Brushed Aluminum (AL), Black (BLK), or White (WH) finish. Can be cut to shorter lengths at the factory.

72” Spot Extension (SpotExt72)

Connector for mounting two spotlights. Specify with the appropriate system connector (not required with Monopoints). Available in Brushed Aluminum (AL), Black (BLK), or White (WH) finish. Can be cut to shorter lengths at the factory. Refer to Installation Instructions for details.

72” Double Spot Extension (DSpotExt72)

81mm(3 -3/16’)

ø24mm(15/16”)

1.8m(72”)1.8m

(72”)

Arte-MR-16 - Accessories (cont’d)

Provides a spill of light onto the wall or ceiling. Reflector finish options: Aluminum (AL), White (WH), or Black (BLK).

Arte-MR16 Wall Wash Kicker Reflector (AMRWWK) ø52mm

(2 -1/16”)

36mm(1 -3/8”)

52mm(2 -1/16”)