Assessment Country Where Assessed Australia
State WA
Operators Manual in English OK
Log Book OK
Maintenance Records OK
Crane Safety Manual No
Major Inspection Report Sighted Yes
Actions Required N/A
ARTICULATED MOBILECRANEReportAC A 153036-11
Div of The Crane Industry Council of AustraliaABN 73 002 565 773
PO Box 136MOUNT WAVERLEY VIC 3149Phone: +61 (03) 9501 0078Email: [email protected]
Accreditation no.19898
Initial Inspection Date: 20/11/2020
Reassessment Date: 30/03/2021
Conforms to Checklist: Yes
Issued Date: 31/03/2021
Expiry Date: 30/03/2022
COMPANYRedLine Mechanical Pty LtdABN 68 070 729 983PO BOX 3054 MIDLAND WA 6056
REPRESENTATIVEMr Michael Verhulst Phone: 0450 695 239Email: [email protected]
ASSESSED BYSean ChinneryReg No: WA1083Phone: 0408 502 735Email: [email protected]
COMPANYOnsite Inspection and TrainingPO Box 383 WILLETONWA 6955
LOWER HOURS
12779KILOMETERS
10313
YOM
1996
SERIAL NUMBER
MC14015PLANT NUMBER
MC14015
MAX LOAD
14000 KGNUMBER OF AXLES
2
DESIGN REGISTRATION NUMBER
14/11/96PLANT REGISTRATION NUMBER
WC19810ROAD REGISTRATION
NOT ROAD REGISTERED
Franna 4WD-MAC14
This report is confirmation that the crane has undergone an annual inspection to the appropriate standard and is considered safe for continued operation at time of inspection.
Accredited for compliance with ISO/IEC 17020
NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, medical testing, calibration and inspection reports
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council of Australia and may not be use without The CraneIndustry Council of Australia's prior written consent.
© The Crane Industry Council of Australia 2021
Page 1 of 14
Boom and Attachments
Base Section OK
No. 1 Section OK
No. 2 Section OK
No. 3 Section REMEDIED
No. 4 Section N/A
Length Markings N/A
Rope Compensation System OK
Hook Lift Lugs and Tonnage Decals OK
Head Sheaves and bearings OK
Idler Sheave and Bearing OK
Rooster Sheave and Bearing N/A
Extension / Fly Jib Mounts N/A
Machinery Hook OK
Boom Lift Cylinders OK
Lock Valve(s) OK
Extension Cylinders OK
Lock Valve(s) OK
Extend Ropes / Chains OK
Retract Ropes / Chains OK
Boom Length Recoil Drum(s) OK
Boom Angle Indicator OK
Extension / Fly Jib N/A
Extension Sheaves and Bearings N/A
ANTI-TWO BLOCKS
Boom Head N/A
Rooster Sheave N/A
Extension / Fly N/A
HOOK BLOCKS - WITH CRANE
Description Block Manufacturers Identification
BP11060996
OK
Branded WLL (kg)
7500kg
OK Safety Latches N/A
Sheaves and Bearings
1
OK
Swivel N/A Branded with Tare Weight (kg)
71kg
OK
HOOK BLOCKS - WITH CRANE No. 2
Description Swivel hook Manufacturers Identification
CCE 2071
OK
Branded WLL (kg)
15000kg
OK Safety Latches OK
Sheaves and Bearings
0
N/A
Swivel OK Branded with Tare Weight (kg)
0kg
N/A
HOOK BLOCKS - WITH CRANE No. 3
Description Rhino hook Manufacturers Identification
175917
OK
Branded WLL (kg)
10000kg
OK Safety Latches OK
Swivel N/A
Branded with Tare Weight (kg)
0kg
N/A
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council of Australia and may not be use without The CraneIndustry Council of Australia's prior written consent.
© The Crane Industry Council of Australia 2021
Page 2 of 14
Frame and Cabin
Drive Systems
Frame OK
Counterweight Attachment - Security OK
Counterweight Hazard Striping REMEDIED
Boom Mounting Lugs OK
Boom Mounting Pins REMEDIED
Lift Cylinder Lugs OK
Lift Cylinder Pins OK
Cab Glass and Mirrors OK
Sheet Metal / Guards OK
Seat and Assembly including Seat Belts OK
Decals / Signs - In English OK
Load Charts in English as per AS1418 OK
Side Slope Deration Chart REMEDIED
Control Levers - Clearly Marked OK
Control Cables / Pilot Hoses OK
Heater N/A
Air Conditioner OK
Gauges OK
Anti-Two block Alarms N/A
Horn OK
Access Steps OK
Doors and Locks OK
Crane Level Indicator OK
Front Wiper OK
Roof Wiper N/A
Windscreen Wiper / Washer OK
Switches and Relays OK
Rotating Beacon(s) OK
Radiator & Coolant level OK
Water Temperature Gauge OK
Radiator Hoses / Heater Hoses OK
Fan / Fan Shaft Assembly OK
Fan Guard OK
Oil Filter & Oil Level OK
Water Pump and Conditioner OK
Oil Cooler(s) N/A
Fuel Lines OK
Throttle OK
Engine Mounts OK
Power Transmission Belts REMEDIED
Exhaust Brake N/A
Muffler / Spark Arrestor OK
Abnormal Engine Noises OK
Fuel Tank & Diesel Level OK
Drive Coupling OK
Transmission Noise / Leaks OK
Filter and Housing OK
Pump Drives (PTO) OK
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council of Australia and may not be use without The CraneIndustry Council of Australia's prior written consent.
© The Crane Industry Council of Australia 2021
Page 3 of 14
Chassis Inspection
Hydraulic System
Air Systems
Frames OK
Suspension System OK
Axle Lock Outs (if fitted) N/A
Steering Components - Lugs / Pins etc OK
Front Axle(s) OK
Rear Axle(s) OK
Differentials / Planetary Drives OK
Transfer Case OK
Drive Lines OK
ABS Brakes N/A
Front Brake(s) OK
Rear Brake(s) OK
Holding / Parking Brake OK
Emergency Brake Release OK
Front Wheels and Tyres OK
Rear Wheels and Tyres OK
Spare Wheel N/A
Engine Cowls OK
Articulation Joint OK
Tackle Boxes OK
Fire Extinguisher OK
Hydraulic Reservoir & Oil Level OK
Return Filters and Housing OK
Suction Lines and Hoses OK
Oil Cooler(s) N/A
Main Pump(s) OK
Steering Pump OK
Emergency Steering Pump OK
Steering Cylinder OK
Relief Valves OK
Flow Control Valves REMEDIED
Pressure Filter and Housing OK
ADDITIONAL ITEMS
Hoses REMEDIED
Compressor OK
Air Reservoirs OK
Drain Valves OK
Air Lines OK
Brake Chambers OK
Brake Valves OK
Air Cylinders N/A
Gauges OK
Air Dryer N/A
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council of Australia and may not be use without The CraneIndustry Council of Australia's prior written consent.
© The Crane Industry Council of Australia 2021
Page 4 of 14
Electrical Systems
Main Winch
Battery Box OK
Battery Cables OK
Battery Isolator OK
Head Lights OK
Tail Lights OK
Stop Lights OK
Directional Indicators OK
Hazard Lights OK
Work Lights OK
Clearance Lights REMEDIED
Switches and Relays OK
Back-up Alarm OK
Horn for Road Travel OK
ADDITIONAL ITEMS
Number plate light REMEDIED
Winch Condition & Oil Level OK
Leaks OK
Rope Spooling OK
Winch Attachment, Pins / Bolts OK
Brake Operation OK
Drum Turn Indicator N/A
Wire Rope OK
Rope Anchor and Pin OK
Correct Assembly and Connection of Hoist Rope Anchor OK
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council of Australia and may not be use without The CraneIndustry Council of Australia's prior written consent.
© The Crane Industry Council of Australia 2021
Page 5 of 14
Functional Tests - Main Winch
Crack Inspection
Rated Capacity Indicator (RCI)
Load Chart Reference Number MCC1087AA
Printed Chart - No Load OK Printed Chart RCI
Boom Angle, deg 30.00 30.00
Boom Length, m 10.00m 10.00m
Radius, m 6.61m 6.60m
Load, kg 3200kg 3100kg
o o
Rated Capacity Limiter (RCL)
Load Chart Reference Number MCC1087A
Rated Load - Boom Fully Extended OK RCI Measured
Radius, m 5.30m 5.30m
Load, kg 3600kg 3510kg
Rated Load in Stability OK RCI Measured
Radius, m 5.30m 5.30m
Load, kg 3600kg 3510kg
Line Pull Test OK RCI Measured
Load, kg 2700kg 2700kg
Winch Brake Test OK RCI Measured
Load, kg 2700kg 2700kg
Overload Warning Lights and Alarms OK Rated Capacity Limiter Fitted (Overload Limiter) OK
No Cracks Detected OK
Any third party testing is not included in the CraneSafe NATA accreditation.
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council of Australia and may not be use without The CraneIndustry Council of Australia's prior written consent.
© The Crane Industry Council of Australia 2021
Page 6 of 14
Manufacturer Additional
Site Requirements
N/A
N/A
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council of Australia and may not be use without The CraneIndustry Council of Australia's prior written consent.
© The Crane Industry Council of Australia 2021
Page 7 of 14
Attachments and Notes
Crane
Assessment
Serial Number Lower Hours
Kilometers Model
Log Book Maintenance Records
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council of Australia and may not be use without The CraneIndustry Council of Australia's prior written consent.
© The Crane Industry Council of Australia 2021
Page 8 of 14
Boom and Attachments
Description Manufacturers Identification
Description Manufacturers Identification
Description Manufacturers Identification
Retract Ropes / Chains No. 3 Section
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council of Australia and may not be use without The CraneIndustry Council of Australia's prior written consent.
© The Crane Industry Council of Australia 2021
Page 9 of 14
Frame and Cabin
Drive Systems
Lift Cylinder PinsMac 14 Cranesafe.pdf
Counterweight Hazard Striping
Boom Mounting PinsMac 14 Cranesafe.pdf
Side Slope Deration Chart
Transmission Noise / Leaksrepaired
Power Transmission Belts
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council of Australia and may not be use without The CraneIndustry Council of Australia's prior written consent.
© The Crane Industry Council of Australia 2021
Page 10 of 14
Chassis Inspection
Hydraulic System
Rear Wheels and Tyres Articulation JointNo movement
Front Wheels and Tyres
Return Filters and Housingrepaired
Flow Control Valves
Additional
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council of Australia and may not be use without The CraneIndustry Council of Australia's prior written consent.
© The Crane Industry Council of Australia 2021
Page 11 of 14
Air Systems
Electrical Systems
Gauges
Battery Isolator Clearance Lights
Mac 14 Cranesafe.pdfAdditional
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council of Australia and may not be use without The CraneIndustry Council of Australia's prior written consent.
© The Crane Industry Council of Australia 2021
Page 12 of 14
Main Winch
Functional Tests - Main Winch
Brake Operation Correct Assembly andConnection of Hoist RopeAnchor
Load Chart Reference Number Rated Load - Boom FullyExtended - Load Measured
Rated Load - Boom FullyExtended
Rated Load - Boom FullyExtended - Load RCI
Line Pull Test - Load Measured Line Pull Test - Load RCI
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council of Australia and may not be use without The CraneIndustry Council of Australia's prior written consent.
© The Crane Industry Council of Australia 2021
Page 13 of 14
Hook Block Certificate
Y - Y Measurement
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council of Australia and may not be use without The CraneIndustry Council of Australia's prior written consent.
© The Crane Industry Council of Australia 2021
Page 14 of 14
Accreditation no. 19898
Wire Rope CertificateCertificate No:
AC R.1 153036-11.1
Company Name: RedLine Mechanical Pty Ltd Crane Serial No.: MC14015Crane Make & Model: Franna 4WD-MAC14 Year of Manufacture: 1996 Length of Rope: 60.00m Wire Rope Application: Main HoistRope Construction: 35 × 7 non rotating Rope Termination (End 1): Swaged End FittingWire Finish: Uncoated Rope Termination (End 2): Wire Rope ClampsDirection of Rope Lay: Lang Right Hand Lay Rope Diameter: 13.00mmSheave Wear: Pass Minimum Diamter Wear: 12.4mm
Position Inspected (approx.
metres) 10 20 30 40 50 60 8
Number of Visible Wire Breaks(over a length of 6x the rope's
dia)AS2759-2004 Clause 14.4
0 0 0 0 0 0 0
Degree of Damage andDeformation of RopeAS2759-2004 Clause14.13
0 0 0 0 0 0 0
Abrasion ofOuter WiresAS2579-2004Clasue 14.9
Degree ofDeterioration 0 0 0 0 0 0 0
CorrosionAS2759-2004Clause14.8
Degree ofDeterioration 0 0 0 0 0 0 0
Reduction ofRope
Diameter AS2759-2004Clause14.9
Measurement(mm) 13.00 13.00 13.00 13.00 13.00 13.00 13.00
Measurement90o (mm) 13.00 13.00 13.00 13.00 13.00 13.00 13.00
Additional Comments
Degree of Deterioration:1 = slight, 2 = medium, 3 = high, 4 = very high, 5 = discard
At time of inspection, the rope measurements and construction was in accordance withthe requirements of AS2759 - 2004 Section 13 and the operators manual supplied with
the crane.
Date Inspected: 30/03/21Date Issued: 31/03/2021
Sean ChinneryCraneSafe Assessor No: WA1083
Accredited for compliance with ISO/IEC 17020NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, medical testing, calibration and inspection reports
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council
of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Supporting Documents
Original Rope Certificate
Accredited for compliance with ISO/IEC 17020NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, medical testing, calibration and inspection reports
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council
of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Accreditation no. 19898
Fall Block CertificateCertificate No:
AC HB.1 153036-11.1
Company Name: RedLine Mechanical Pty Ltd Crane Serial No.: MC14015Crane Make & Model: Franna 4WD-MAC14 Year of Manufacture: 1996
Item InspectedAS1418.5-2013 Annex K.1
FallBlock
MANUFACTURERS ID no. BP11060996
NOMINAL LIFTING LOAD 7500kg
MASS 71kg
AS1418.5-2013 Annex K.3
Sheave
NUMBER OF SHEAVES 1
ROPE DIAMETER 13mm
KIND OF MATERIAL Metal
GROOVE WEAR
BRUISING
ROTATING / BEARING
CRACKS
CHIPS
At time of Inspection, the hook block was in accordance with the requirements of AS1418Part 5 2013 and the load charts supplied with the crane.
Date Inspected: 30/03/21Date Issued: 31/03/2021
Sean ChinneryCraneSafe Assessor No: WA1083
Accredited for compliance with ISO/IEC 17020NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, medical testing, calibration and inspection reports
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council
of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Accreditation no. 19898
Hook Block CertificateCertificate No:
AC HB.2 153036-11.1
Company Name: RedLine Mechanical Pty Ltd Crane Serial No.: MC14015Crane Make & Model: Franna 4WD-MAC14 Year of Manufacture: 1996
Item InspectedAS1418.5-2013 Annex K.1
HookBlock
MANUFACTURERS ID no. CCE 2071
FORM OF HOOK Single
NOMINAL LIFTING LOAD 15000kg
MASS 0kg
AS1418.5-2013 Annex K.2
LiftingHook
WEAR
CRACKS
DEFORMATION
SAFETY LATCH
SWIVEL
BEARING
HOOK BRUISING
Y - Y MEASUREMENT 100mm
AS1418.5-2013 Clause 4.2.13
At time of Inspection, the hook block was in accordance with the requirements of AS1418Part 5 2013 and the load charts supplied with the crane.
Date Inspected: 30/03/21Date Issued: 31/03/2021
Sean ChinneryCraneSafe Assessor No: WA1083
Accredited for compliance with ISO/IEC 17020NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, medical testing, calibration and inspection reports
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The Crane Industry Council
of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Accreditation no. 19898
Certificate No: WA153036
CERTIFICATE OF ANNUALINSPECTION AND TESTINGArticulated Mobile Crane
Inspection Date: 30/03/21 Renewal Date: 30/03/2022 Issued Date: 31/03/2021
Location of Inspection: Redline mechanical
Crane Owner: RedLine Mechanical Pty Ltd
Address: PO BOX 3054 MIDLAND, 6056, WA, Australia
Crane Make: FrannaCrane Model: 4WD-MAC14Crane Serial Number: MC14015YOM: 1996Hours: 12779
Inspection in accordance with: AS2550.1 & AS2550.5 EN (FEM&ISO) JIS
Codes of Practice Manufacturer's Instructions.
Inspection Comments:
This certificate is confirmation that the crane has undergone an annual inspection to theappropriate standard and is considered safe for continued operation at time of inspection.
Signed: Printed Name: Sean Chinnery
CraneSafe Assessor No:: WA1083 CraneSafe Assessment No: AC A 153036-11
Accredited for compliance with ISO/IEC 17020NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, medical testing, calibration and inspection
reports© The Crane Industry Council of Australia 2009
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property ofThe Crane Industry Council of Australia and may not be used without The Crane Industry Council of Australia's prior written consent.
Accreditation no. 19898
Certificate No: WA153036
LOAD INDICATOR CERTIFICATIONArticulated Mobile Crane
Annual Inspection Date: 31/03/2021 Crane Owner: RedLine Mechanical Pty LtdAddress: PO BOX 3054 MIDLAND, 6056, WA, Australia
Crane Make: Franna Crane Model: 4WD-MAC14Crane Serial Number: MC14015 YOM: 1996 Hours: 12779
Printed Chart - No LoadPrintedChart
Rated CapacityIndicator
Boom Angle, deg 30.00 30.00Boom Length, m 10.00 10.00Radius, m 6.61 6.60Load, kg 3,200.00 3,100.00
Rated Load - Boom Fully ExtendedRated Capacity
Indicator Measured
Radius, m 5.30 5.30Load, kg 3,600.00 3,510.00
Rated Load in StabilityRated Capacity
Indicator Measured
Radius, m 5.30 5.30Load, kg 3,600.00 3,510.00
Line Pull TestRated Capacity
Indicator Measured
Load, kg 2,700.00 2,700.00
Winch Brake TestRated Capacity
Indicator Measured
Load, kg 2,700.00 2,700.00
Rated Capacity Indicator (RCI)Load Chart Reference Number MCC1087AA
Rated Capacity Limiter (RCL)Load Chart Reference Number MCC1087A
At the time of test, the load indicator was reading in accordance with therequirements of AS1418.1 & AS1418.5 and the load charts supplied with the crane
Signed: Printed Name: Sean Chinnery
CraneSafe Assessor No:: WA1083 CraneSafe Assessment No: AC A 153036-11
Issued Date:: 31/03/2021Accredited for compliance with ISO/IEC 17020
NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, medical testing, calibration and inspection reports© The Crane Industry Council of Australia 2009
All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of TheCrane Industry Council of Australia and may not be used without The Crane Industry Council of Australia's prior written consent.
SUPPORTING INFORMATION