This product is used where the controlled isolation of a machine or process needs to take place, i.e. where a robot has to finish a cycle prior to isolation or temporisation, zero speed position, temperature level…
With this product, the key(s) can only be released when an electrical signal is given to the solenoid (when it’s energised or not energised). The solenoid then changes its position and allows the key or keys to be rotated. Electrical switches also change position depending on the status of the key.
System available from 1 to 3 cylinders depending on your application.
USAGE
The Electromechanical controlled switch is designed to be part of a safety system. It is used to isolate the power releasing a key which is then used to gain access to a hazardous area via an access interlock.
The solenoid controlled switch is not designed for security purposes.
INSTALLATION
Contact STI for installation instructions.
MAINTENANCE
Contact STI for maintenance instructions.
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Serv Trayvou Interverrouillage S.A.S. reserves the right to alter specifications and introduce improvements without prior notice.
ASE/HSE Electromechanical Solenoid Controlled Key Switch
1 of 7
www.servtrayvou.comASE/HSE Electromechanical (01-20)
TECHNICAL DATA
Temperature rating Contact STI for details
Type of mounting Surface mount using with suitable fasteners
Weight 1,5 Kg
Material- Metal: Black anodised - Nickel brass - Zamak- Composite: Black anodised - GRIVORY (65% FV) - Nickel brass - Zamak
Product finish Black anodised
Enclosure Contact STI for details
Power isolation 6A
Voltage 24, 48, 110, 125, 220 VDC & VAC
Nominal power consumption Coil: 7,5W
Motor isolation (AC values) / Switch polarity 4000V
Homologation - Low-voltage directive 2006-95-CE- EMC directive 2004-108-CE
Salt spray resistance Contact STI for details
IP Rating (option IP54) Contact STI for details
Mechanical life Contact STI for details
B10d Contact STI for details
Diagnostic coverage (%) Contact STI for details
Retention force Contact STI for details
Shock & vibration (IK) Transport and functional random vibration
Dielectric Contact STI for details
ROHS Certificate available on request
REACH Certificate available on request
Conflict mineral Certificate available on request
OPTIONS
• Flat or Star key
• Up to 3 key entries
• Function : determined by the customer when filling out a specification sheet.
• Switch : Wiring of the switch can be determined by the customer when filling out the specification sheet. Up to X switches can be used.
• Type of rotor (aluminium or composite)
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Serv Trayvou Interverrouillage S.A.S. reserves the right to alter specifications and introduce improvements without prior notice.
ASE/HSE Electromechanical Solenoid Controlled Key Switch
2 of 7
www.servtrayvou.comASE/HSE Electromechanical (01-20)
APPLICATION
While the UPS is running, the key is trapped in the ASE/HSE Interlock. The key can only be turned and released when the UPS is put into Bypass. This will energise the solenoid via a remote signal from the UPS system.
Turning the key changes the condition of the switch and released the key, which can now be transferred to the access interlock. This allows access to the UPS for maintenance.
The UPS will remain in a safe state until the key is returned from the SP lock or ACCESS lock and inserted back into the electromechanical lock and trapped. This allows the UPS to be returned to service.
Supply
A B
Load
UPSUPS Bypass
Access Interlock
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Serv Trayvou Interverrouillage S.A.S. reserves the right to alter specifications and introduce improvements without prior notice.
ASE/HSE Electromechanical Solenoid Controlled Key Switch
3 of 7
www.servtrayvou.comASE/HSE Electromechanical (01-20)
DRAWING Dimensions: in mm
Note: For safe mounting, use security screws
ASE/HSE Electromechanical
21,50 264
8167
250
4 trous de fixation 5,30(4 mounting holes 5.30)31
40,50
7
28
7
23
27
134
56
19
19,50
30
Bouton poussoir (Push-button)Voyant lumineux (Indicator light)
Presse étoupe(Cable gland)M20 ISO
Fonction: A,B
Référence Produitavec clé type:(product reference following key type:)
- Plate = HSE10APS5000(flat)
5 = Rotor Aluminium6 =Rotor Composite
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Serv Trayvou Interverrouillage S.A.S. reserves the right to alter specifications and introduce improvements without prior notice.
ASE/HSE Electromechanical Solenoid Controlled Key Switch
4 of 7
www.servtrayvou.comASE/HSE Electromechanical (01-20)
DRAWING Dimensions: in mm
Note: For safe mounting, use security screws
ASE/HSE Electromechanical
21,50 264
8167
250
4 trous de fixation 5,3031 134
40,50
7
28 27
23
5619,50
103,45
Bouton poussoirVoyant lumineux
Presse étoupeM20 ISO
contact inverseur
ETAT INITIAL (à la livraison)CLE PRISONNIERE
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Serv Trayvou Interverrouillage S.A.S. reserves the right to alter specifications and introduce improvements without prior notice.
ASE/HSE Electromechanical Solenoid Controlled Key Switch
5 of 7
www.servtrayvou.comASE/HSE Electromechanical (01-20)
WIRING DIAGRAM
ASE/HSE Electromechanical
ETAT FINALCLE LIBRE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
A
B
C
D
E
F
G
H
Auteur : STI HFS Serrure électromécanique 1 entrée - 1O1F clé prisonnière
Fichier :
Date : 30/12/2019 Folio : 1/1
63
TERRE
C14 SW1
3
C12 SW1
1
L1
4
S1
7
CLEC1
1 52
BP
LAMPE L1+BP intégré ELECTRO
AIMANT S1
BORNIER
SWITCHSW1
(+/~)(-/~)
BORNIER2
53 42 7
8
3
61
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
A
B
C
D
E
F
G
H
Auteur : STI HFS Serrure électromécanique 1 entrée - 1O1F clé prisonnière
Fichier :
Date : 30/12/2019 Folio : 1/1
63
TERRE
C14 SW1
3
C12 SW1
1
L1
4
S1
7
CLEC1
1 52
BP
LAMPE L1+BP intégré ELECTRO
AIMANT S1
BORNIER
SWITCHSW1
(+/~)(-/~)
BORNIER2
53 42 7
8
3
61
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Serv Trayvou Interverrouillage S.A.S. reserves the right to alter specifications and introduce improvements without prior notice.
ASE/HSE Electromechanical Solenoid Controlled Key Switch
6 of 7
www.servtrayvou.comASE/HSE Electromechanical (01-20)
CONTACT INFORMATION
Serv Trayvou1 ter rue du Marais93100 MONTREUILFrance
t : +33 (0)1 48 18 15 15f : +33 (0)1 48 59 68 50e : [email protected]
ORDER INFORMATION
1 2 3 4 5 6 7 8
Part number
Example A SE 1 1 A EL 5 000
1 Cylinder profileA = Flat keyH = Star key
2 Product family SE = Standard electromechanical lock
3 No. of cylinders123
4 No. of bolts 1
5 FunctionFunctionA,B
4 Key profileStar key = PSFlat key 5 pins = EK, EL, EM, EP, ET, EVFlat key 6 pins = GK, GL, GM, GP, GT, GV
5 Type of rotor 5 = Aluminium6 = Composite
6 Particularity 000 = StandardContact us for customized solution (wiring/options...)
ACCESSORIES
• Flip cap
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Serv Trayvou Interverrouillage S.A.S. reserves the right to alter specifications and introduce improvements without prior notice.
ASE/HSE Electromechanical Solenoid Controlled Key Switch
7 of 7
www.servtrayvou.comASE/HSE Electromechanical (01-20)