8/8/2019 Ashida-Scada

1/4

Let the work for youMASTERMIND

ASHIDA SystemsASCADA-SAS

A 2R D 1 B4

NO

SN IA

05

N50

55 10,

5 50 1N N,

79

4T7 C

IEC

I>>

IE>>

I>t, Ip

EE>t, II P

E T N IR N UC OI TT N

P O F C O

S OVE RC ENTIN AN UT TAN U R

S EO R

AUI

LN AN N HST TA U EO S F TEARTT C EN PHT SE)U AI R ME VER R (O

O EN ARTC T EIM UR R HER (

T V R )O RECU LA SERT O

R U PERI C I P T VIT IR SION.C SU RC OLONTBREAKER

rFe P lar tee o c yde i t on Re

sr i es e

3S 2R 2

PKP

TF LAU

LCSP/R

PI TR

NCHAN EL

NCHAN EL

NCHAN EL

CHANNEL

STATUSON

STATUSOFF

8/8/2019 Ashida-Scada

2/4

Keeping an eye on your valuable systemsdigitallyKeeping an eye on your valuable systemsdigitally

With the opening of the electrical utility market, Sub-station

Automation or SCADA systems have now changed from

Luxury to Necessity. Exorbitant prices however have always

been a hurdle in implementing a SCADA scheme. But now

advancements in Electronics & Software field, coupled with

ASHIDA design has made it possible to implement a

sophisticated system to monitor & control a satellite substation

from a central location, without a high price-tag normally

associated with such systems. ASHIDA is not just a SCADA

System Integrator but a complete solution provider. The tight

integration of Ashida Software & Hardware modules has had

a definite impact on the overall quality & economy of the

system.

In a simple ASCADA-SAS scheme, the ASCADA-SAS Software

communicates with FCCM modules installed on individual

bays. Various options are available for communication. All

such information collected from various modules is then

processed, recorded & presented to the user in easily

understandable formats. The user has an option to control

individual bays based on this data. Multiple such sub-stations

Hardware (FCCM) Features:> RTU/ Transducer-less operation. All parameters measured

by a single Intelligent Electronic Device.> Lifetime calibration of measuring circuit. No need for

frequent calibration.> High Thermal withstand capacity. All field instruments can

measure more than 100 Amps of current for 3 Sec.> In-built real-time clock enables time stamping of

parameters before storing.> Hardware ports supported include RS-485, Fiber-optic &

Ethernet.> Protocols supported are IEC60870-5-103 & ASCADA

proprietary.

Software Features> Intuitive GUI based software needs minimal training for

usage.> Onsite configuration of Mimic & report formats.

ASCADA-SAS Substation Automation System

Features of ASCADA-SAS system

> Reports generated can be exported to standard office

formats.> Can support multiple sub-stations & clients.> Can support multiple party IED with IBC-103, DNP3 or

MODBUS protocol.

System Features> High Performance at affordable prices.> Clean implementation. Very few wires need to be wired

around the sub-station.> System can work over wide range of communication

mediums.> Can be installed in incremental implementation.

Installation can start with small number of monitoring

points & later on can be expanded to increase the scope.All this by simply adding new modules.

can be monitored from a single location. The recorded data is

used to generate reports like Hourly logs, Energy audit reports,

Occurrence reports, Event Sequence report & various other

analytical reports.

Further Ashida ASCADA integrates with protection relays/ IEDs

from various vendors, which support standard protocols to

provide additional protection data & powerful fault analysis. It

is possible to forward all parameters to a central control or to a

separate system like GIS. Additional client software can be

installed on a separate PC for analysis. For critical installations,

redundant server configuration is an option. The system can

also connect to a GPS timeserver for Time synchronisation

between all IEDs.

H NC N LA E

C NA ELH N

C NAN E LH

CHANNEL

T OSTA US N

FSTATUSO F

8/8/2019 Ashida-Scada

3/4

Feeder Control & Communication Module

Protocol

Convertors

FCCM4 Specification

This Module is similar to FCCM/2 Module inaddition, having extra Analogue Input for

monitoring Transformer Oil Temperature,Winding Temperature & other 4-20 mA Inputs

Inputs : Maximum 64 Optically Isolated

Potential Ridden Contactsdivided into 4 groups withcommon return, which are used

for monitoring various Status &

Alarms of the Sub-Station.Measurement Accuracy :All Events are time

stamped with 1msec Accuracy.Auxiliary Supply:18-52 V DC/AC or 77-250 V

DC/AC or +12 & +24VDC.Internal Memory : Buffer for upto 256 Events,

in case of Communicationfailure.

Type Test :As per IEC 60255 standard.

Communication Ports : Options of Rs485,RS232, Fiber-optic or Ethernet

connections.

Communication Protocols : IEC-870-5-103or 'ASCADA' Ashida proprietary.

Cutout : 138 x 280 mm.

Outputs : Maximum 32 Potential free NOContacts divided into 4 groups

which are used for Controloperation of various Electrical

Mechanisms of the Sub-Station.Auxiliary Supply:18-52 V DC/AC or 77-250 V

DC/AC or +12 & +24VDC

Contact Rating:Alarm Duty (should be usedalong with auxiliary tripping relay

to operated CB coil directly).

Insulation: As per IS:3231/ IEC 255.Impulse Test :As per IS:8686 / IEC 255.Communication Ports : Options of Rs485,

RS232, Fiber-optic or Ethernetconnections

Communication Protocols : IEC-870-5-103

or 'ASCADA' Ashida proprietary.Cutout : 138 x 280 mm.

Input : CT Secondary 1 Amp / 5 Amp.

PT Secondary 110 V8 Digital Status input.

Burden on CT : Less then 0.1 VA.

Burden on PT : Less then 2 VA.

Measured Values : 3Voltage + Open Delta

Voltage. 3 Current+Neutral-

Earth Current. 8 Status.Recording Resolution : 1 msec Sampling.

Auxiliary Supply : 18-52 V DC/AC or 77-250 V

DC / AC or +12 & +24VDC.Noise Interference : Complies with IS:8686.

Environment Test : Damp heat cycle test asper IS:9000.

Thermal Withstand : 200 Amp for 3 sec.Type Test :As per IEC 60255 standard.

Communication Ports : Options of Rs485,

RS232, Fiber-optic or Ethernetconnections

Communication Protocols : IEC-870-5-103or 'ASCADA' Ashida proprietary.

Cutout : 138 x 280 mm.

Input : 1 Amp / 5 Amp.

Burden on CT : Less then 0.1 VA.

Burden on PT : Less then 2 VA.

Measured Values : 3 Current / Voltage.

3 Power Factor / Phase Angle.

Power - Active, Reactive &Apparent

Energy - Import & ExportPower Line Frequency.8 Status inputs.

Measurement Accuracy

: Class 1. (or better on request)Auxiliary Supply: 18-52 V DC/ AC or 77-250 V

DC/AC or +12 & +24VDC.Burden on Auxiliary Supply : Less then 10 VA.

Control Contacts: 8 sets of potential free NO

Contacts for control operation.Type Test : As per IEC 60255 standard.

Thermal Withstand : 200 Amp for 3 sec.Communication Ports : Options of RS485,

RS232, Fiber- optic or Ethernetconnections.

Communication Protocols:IEC-870-5-103 or'ASCADA' Ashida proprietary.Cutout : 138 x 280 mm.

FCCM/2 & 4

Feeder Control & Communication Module

with Disturbance Recorder

FCCM/DR

Feeder Control & Communication Module

FCCM/3

FCCM/5

HANN LC E

HANN LC E

HANN LC E

NCHA NEL

STATUSON

STATUSOFF

8/8/2019 Ashida-Scada

4/4

Designedby:HEMISPHEREADVERTISING

Cell:9820082678Tel:022-26186697

ASHIDA HOUSE,A-308. Road No.21, Wagle Industrial Estate, Thane-400604. INDIA

Tel: 91-22-2582 7524 / 25 / 26, 5577 1076 / 77 / 78Fax: 91-22-2580 4262 Email: sales@ashidaelectronics.com

www.ashidaelectronics.com

ASHIDAELECTRONICS PVT. LTD.

> Isolated RS 232-232 Repeater.> Isolated RS 232-485 Convertor.> Isolated RS232 -Ethernet Convertor.> Isolated RS 485-485 Repeater.> Fiber optics convertor.> Port Switches / data concentrators.> AC/DC changeover Power Supply, etc.

> Accurate Frequency monitoring with

Crystal Controlled references.> Trip Frequency Point can be selected with

0.01 Hz Resolution.> Self-Calibration and check ON-Site facility

inbuilt.> Instrument tested to withstand as per

IS:3231, IS:8686-1977 Specification.> Two Independent set points

programmable as Under or Over

Frequency.> RS232 & RS485 Communication Port for

remote SCADA.> AC Input from 230/110/63 V AC PT for

Frequency Sensing.> Frequency setting Range : 49.99 Hz to

40.00 Hz in steps of 0.01 Hz for Under

Frequency and 50.01 Hz to 60.00 Hz insteps of 0,01 Hz for Over Frequency.

> Accuracy Setting : +/- 0.01 Hz Repeat

Accuracy better then 0.05 Hz.> Delay Time Adjustment : 0 to 99.9 sec

Accuracy +/- 5% or +/- 0.02s whicheveris Higher.

> Programmable Hysterisis.> This Relay is also available with 2 Stage

df/dt and 2 Stage Under/Over FrequencyFeatures.

> Cutout : 186 x 92 mm.

ASCADA Accessories

Numerical Under/Over FrequencyMonitoring Relay

AUOFMR2

> Central control over distant processes> Accurate & Timely data availability for

fault analysis. (e.g. a major breakdown).> Instant actions can be taken in case of

emergencies> All substation status report available at the

main center instantly for the topmanagement to take quick decision.

> Better management of availableresources.

> Preprogrammed response to a event

possible.> Full utilisation of costly Numeric Relays:

ASCADA-SAS system will enable fullutilisation of latest Relay by allowing

reading of disturbance data, event fromNumeric Protection Relays

> Unmanning of Substation: with this system

a 'unmanned' substation controlled froma central location become a reality.

Some of the advantages

of such type of system

GENERAL FEATURES> RS232 and RS485 Communication port for

Local / Remote SCADA System> Load parameter on LCD Display> Latching of fault parameter> Programming Via local keys as well as

remote programming Via communication

port .> Back-lit LCD display for settings & parameter

display> Pass-word protection> Communication with IEC-870 protocol> Disturbance recording> Tested as per IEC 60255 standard

ASHIDAELECTRONICS PVT. LTD.

A R 2 1D B4

NO

SN IA

05

N50

55 10,

5 50 1N N,

79

4T7 C

EI C

I>>

IE>>

I>t, Ip

EE>t, II P

E N IR T N UC OIT T NP O F C O

S OVE RC ENTIN AN U

T AN U R S T EO R

AULIN AN HT AN U

S T EO S F TEARTT C EN PHT SE)U A

I R ME VER R (O

O EN AC E RTI U TMR R HER (

T V R )OR ECAU L SERT O

R U PERI CP IT VIT IR SI NO .C SU RC LON OTBREAKER

rFe P lae rote ycde iont Re

sr es ie

3S 2R 2

PKP

TF LAU

LSP CR /

PITR

ASHIDA Numerical Protection Relay

s e r i e s

ADITYA Numerical Relay having Common UserInterface & Communication Interface. Various

protection such as OC / EF (IDMT / Definite time)

/ Transformer differential / Directional / Reversepower / UV / OV can be available.