FOR SALE £74,995.00 Gerald No 28 This boat is beautifully finished and equipped for living aboard or extensive cruising. A quality shell with excellent fit out that has some lovely finishing touches. Ill health is forcing the owner into a reluctant sale. Boat Specification: Vessel Type: Semi trad narrowboat Length x Width: 70’ x 6’ 10” Draft: 2’ 2” Shell Built By: Tim Tyler Fitted Out By: Colin Clements Year of Construction: 2013 Hull Thickness: 10.6.5.4mm Index No: 40691 Boat Safety Certificate: Valid till August 2021 – owner to Engine Details: Manufacturer: Isuzu 42 linked to PRM 260D3 gearbox and Python Drive Year of Manufacture: Same as the boat Running hours: (1350 As at: June 2020) – Little used since Fuel: Diesel Last Serviced: March 2020 Specifications: Bow Thruster: No Batteries: 1 starter and 5 leisure batteries (New July 2017) Inverter: 3000w Victron (New Nov 2019) Shoreline: Yes Solar: None Hot Water System: Calorifier linked to engine and Eberspacher. Also immersion heater for when shoreline applied Central Heating: 4 radiators plus towel rail linked to Eberspacher that links to digital timer and
Transcript
FOR SALE £74,995.00
Gerald No 28
This boat is beautifully finished and equipped for living aboard or extensive cruising. A quality shell with excellent fit out that has some lovely finishing touches. Ill health is forcing the owner into a reluctant sale.
Boat Specification:
Vessel Type: Semi trad narrowboatLength x Width: 70’ x 6’ 10”Draft: 2’ 2”Shell Built By: Tim TylerFitted Out By: Colin ClementsYear of Construction: 2013Hull Thickness: 10.6.5.4mmIndex No: 40691Boat Safety Certificate: Valid till August 2021 – owner to renew as part of the saleLast Docked for Blacking: Nov 2017, blacked with Signacover 300 2 pack epoxy. Cabin sides and roof re-painted at the same time.Last Surveyed: October 2020, copy available on request
Engine Details:
Manufacturer: Isuzu 42 linked to PRM 260D3 gearbox and Python DriveYear of Manufacture: Same as the boatRunning hours: (1350 As at: June 2020) – Little used sinceFuel: DieselLast Serviced: March 2020
Specifications:
Bow Thruster: NoBatteries: 1 starter and 5 leisure batteries (New July 2017)Inverter: 3000w Victron (New Nov 2019)Shoreline: YesSolar: NoneHot Water System: Calorifier linked to engine and Eberspacher. Also immersion heater for when shoreline appliedCentral Heating: 4 radiators plus towel rail linked to Eberspacher that links to digital timer and mobile phoneOther Heating: Morso solid fuel stove in living areaGalvanic Isolator: Yes
Overall Accommodation:
STERN Utility Bedroom Dressing Bathroom Dining Galley Living Area BOW Room Area
The above diagram illustrates the base layout but please note that this is not to scale.
Internal Décor:
Headroom: Domed ceiling giving 6’5 in the centre and 6’3 on the sideInsulation: Sprayfoam
Roof : Wood faced panels in off white with natural wood trim.Upper Sides: As roof.Lower Sides: Tongue and groove with natural finish and trim.Side Hatches: Located opposite the Pullman dining area.Floor Covering: Carpet in the main living areas, laminate wood look planks in the galley and dining area, vinyl floor covering in the laundry and bathroom .
Windows: Large picture windows with top hopper in the main living areas with brass finish. Matching portholes in the bathroom, bedroom and laundry areas. Curtains in the main living areas; bungs for the portholes and blinds in the galley.
Lights: Feature ceiling lights throughout and wall spots in galley and bedroom areas, all with LED bulbs.
Sockets: 240v sockets are located in the living area, galley, utility, dressing room and bedroom; plus 12v socket in the living area.
Please note: The red and grey check cushions and picture in dining area have been removed.
Individual Rooms
Living Area:
Entry from front deck via glazed doors. Large sofa with bespoke unit opposite. Matching unit to the side of the entry steps. Wiring for TV that links TV to Digital X2 aerial. Morso Squirrel stove set on hearth with tiled surround on opposite side of entry steps.
Galley:
Passage style layout. Shaker style units giving a variety of storage solutions with white finish and feature handles.
Contrasting hanging cupboards on the one side to match units in the living area, with spots underneath.
Melamine worktops in slate marbled finish. Tiled splashback to match those used on the hearth in the living area. Stainless sink with inset and drainer serviced by a mixer tap. Free standing LPG cooker with 4 burner hob and separate grill and oven below. Waist level fridge. Side hatch with drop in swan.
Dining Area:
Pullman dinette on raised plinth. Storage below the seating and within the plinth itself.
Bathroom:
Located off the corridor that links living areas to the bedroom. Large side bathroom with plenty of space for dressing. Enclosed built-in bath with overhead shower and curtain. Vanity with cupboards below in white finish with feature handles. Cassette toilet. Bathroom cabinet with mirror doors.
Bedroom:
The bedroom area is fronted by a dressing area with extensive wardrobes and cupboard space. Full length mirror on the inside of the wardrobe door.
Fixed 4’6” double bed with two shelves above head Open storage below. TV at base.
Utility:
Accessed from the rear deck via steps. Cupboards on either side of the entry steps. Floor hatch. Washing machine (New in 2020). Freezer Worktop above, melamine finish to match galley.
External:
Front cratch area has lockers with cushions. Canvas cover with windows. Glass panel within cratch board. Feature blinds on entry doors.
Semi trad back deck with locker seating on either side. Pram cover. Engine below.
Gunwale provides easy access from stern to front deck. Integral handrails within the cabin sides. Cabin sides and roof were re-painted in 2017.
Cruising Gear:
Lock windlass - Yes Sanitary station key – YesMooring stakes – Yes Anti vandal key – YesPiling chains and/or clips – 2 Boat pole - YesMooring line – fore - Yes Boat hook – YesMooring line – aft - Yes Plank – YesMooring line – centre – Yes No. of sets of keys – 2Fenders – Fore – Yes Long hose pipeFenders – Aft - Yes
Other:
Boat folder with Tim Tyler paperwork and manuals etc. Bills of sale for the 3 owners since new.
If you would like further information on Gerald no 28, or would like to arrange a viewing, please call Sammy Rose on 01384 295535 or 07702 190850.
Whilst every care has been taken in preparation, the correctness of these particulars are intended only as a guide and do not constitute a term of contract. Prospective buyers are strongly advised to check particulars and where appropriate, have the vessel fully surveyed/inspected.
Estimated Running Costs for This Vessel at Ashwood Marina
Average mooring fees for a seasonal mooring on our Brindley jetties: £795.36 per quarter, with a one off berthing & registration fee of: £396.17
Craning the boat out of the water, power washing the hull, storing on hard standing (for any hull maintenance/repairs to be undertaken) for one month and then craning back into the water the following month: £375.00
Hull blacking: £770.00; even with 2-pak base we would suggest this is done every 4 years. Anodes will most likely need replacing at the same time: £200.00
Boat winterising or de-winterising: £140.00
Boat Safety Scheme examination: £175.00; required every 4 years
Insurance: £200-£250
CRT Cruising license for 12 months: £1,132.85; for 6 months: £679.71 (Price valid from 1/4/20-31/3/21)
