LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width OptionsLeeBoy makes continuous improvements in all its products. We reserve
the right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10-gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10-gauge (3.4 mm) shell • 7-gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 5-in. (127 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 deg o eer s on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Optional liquid withdrawal LPG
burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for cl an ou fo tepump and piping
• Enviro-Flush clean out system for environme t l y- lanfriendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Plus-1 system controls auto valves for 8 modes of distributor operation: Off, Clean-out, Reverse Suction,Handspray/Unload, Transfer, Load, Tank Circulate, Spray. The panel
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV105 , 4- 4 in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4-in. (10 ) mm 2increments as it is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating spraybars via cab controls
keep spraybar pressurized and heated. Activated nozzles turn on while extending
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual manual shutoff valves for each nozzle
• All spray valves are mounted internallyto ensure continuous heating andminimized plugging.
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
includes spraybar control allowing thespraybar nozzles to be turned off, spray asphalt, or pressurize and heat the spraybar using bar circluate functions.
and turn off while retracting the spraybar,eliminating overspray.
Optional radar horn
18- or 20-ft. EZ-Spray extendible e t x e y a r p S - Z E . t f - 0 2 r o - 8 1spraybar system
Maximizer 3 Specifications
•
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Avoid ObstaclesOn-The-Move
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Avoid ObstaclesOn-The-Move
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Avoid ObstaclesOn-The-Move
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Avoid ObstaclesOn-The-Move
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Avoid ObstaclesOn-The-Move
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Avoid ObstaclesOn-The-Move
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributorfeatures an extendiblespraybar that smoothlymoves from an 8-foot to 16-foot width in 4-inchincrements. The EZ-Sprayextendible spraybarmakes radius and taper spraying, along withmaneuvering for obstacles such as bridges, a smoothand efficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ-Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributorfeatures an extendiblespraybar that smoothlymoves from an 8-foot to 16-foot width in 4-inchincrements. The EZ-Sprayextendible spraybarmakes radius and taper spraying, along withmaneuvering for obstacles such as bridges, a smoothand efficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ-Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributorfeatures an extendiblespraybar that smoothlymoves from an 8-foot to 16-foot width in 4-inchincrements. The EZ-Sprayextendible spraybarmakes radius and taper spraying, along withmaneuvering for obstacles such as bridges, a smoothand efficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ-Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributorfeatures an extendiblespraybar that smoothlymoves from an 8-foot to 16-foot width in 4-inchincrements. The EZ-Sprayextendible spraybarmakes radius and taper spraying, along withmaneuvering for obstacles such as bridges, a smoothand efficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ-Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributorfeatures an extendiblespraybar that smoothlymoves from an 8-foot to 16-foot width in 4-inchincrements. The EZ-Sprayextendible spraybarmakes radius and taper spraying, along withmaneuvering for obstacles such as bridges, a smoothand efficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ-Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributorfeatures an extendiblespraybar that smoothlymoves from an 8-foot to 16-foot width in 4-inchincrements. The EZ-Sprayextendible spraybarmakes radius and taper spraying, along withmaneuvering for obstacles such as bridges, a smoothand efficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ-Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300 Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10- gauge
(3.4 mm) surge plates with staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10- gauge (3.4 mm) shell • 7- gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 5- in. (127 mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Optional liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• Plus-1 control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 12 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• In-cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/ 4 LPM 15,1 capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• On/Off of spraybar in 1- ft.
(.3 m) increments• Controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Controls in the cab and at the rearfender provide manual control ofthe asphalt pump speed.
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission to
drive distributor hydraulics.
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual manual shutoff valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are mounted internally
to ensure continuous heating and minimized plugging.
NOZZLES• Standard brass )mm 201t - 4 , in. (ej-V
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's Plus-1 controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliableworkhorse on the job. Clean-upis a snap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Avoid ObstaclesOn-The-Move
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's Plus-1 controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliableworkhorse on the job. Clean-upis a snap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Avoid ObstaclesOn-The-Move
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's Plus-1 controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliableworkhorse on the job. Clean-upis a snap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's Plus-1 controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliableworkhorse on the job. Clean-upis a snap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's Plus-1 controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliableworkhorse on the job. Clean-upis a snap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's Plus-1 controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliableworkhorse on the job. Clean-upis a snap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's Plus-1 controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliableworkhorse on the job. Clean-upis a snap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
Plus-1 ControllerPlus-1 Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
Automatic Valve ControlAutomatically controlled by the Plus-1 Controller,valves make for clean and accurate asphalt movement and distribution.
E n v i r o - F l u s h C l e a n i n g S y s t e m
Activate Enviro-FlushCleanout Cycle. Automated valve opens and adds a small amount of solvent to the system.
Cleanout cycle opensre-circulate valve to flush solvent through the entire spray system
Reopen Enviro-Flushvalve and reverse pump to return solvent to 25-gallon tank to bereused again and again.
Material is contained in the tank until it can be disposed of at an environmentally safe location.
1 2 43and bar.
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
4- inch Dial Thermometer and Armored Pencil Thermometer
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
Plus-1 ControllerPlus-1 Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
Automatic Valve ControlAutomatically controlled by the Plus-1 Controller,valves make for clean and accurate asphalt movement and distribution.
E n v i r o - F l u s h C l e a n i n g S y s t e m
Activate Enviro-FlushCleanout Cycle. Automated valve opens and adds a small amount of solvent to the system.
Cleanout cycle opensre-circulate valve to flush solvent through the entire spray system
Reopen Enviro-Flushvalve and reverse pump to return solvent to 25-gallon tank to bereused again and again.
Material is contained in the tank until it can be disposed of at an environmentally safe location.
1 2 43and bar.
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerPlus-1 Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the Plus-1 Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerPlus-1 Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the Plus-1 Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
Plus-1 ControllerPlus-1 Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
Automatic Valve ControlAutomatically controlled by the Plus-1 Controller,valves make for clean and accurate asphalt movement and distribution.
E n v i r o - F l u s h C l e a n i n g S y s t e m
Activate Enviro-FlushCleanout Cycle. Automated valve opens and adds a small amount of solvent to the system.
Cleanout cycle opensre-circulate valve to flush solvent through the entire spray system
Reopen Enviro-Flushvalve and reverse pump to return solvent to 25-gallon tank to bereused again and again.
Material is contained in the tank until it can be disposed of at an environmentally safe location.
1 2 43and bar.
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
4- inch Dial Thermometer and Armored Pencil Thermometer
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
Plus-1 ControllerPlus-1 Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
Automatic Valve ControlAutomatically controlled by the Plus-1 Controller,valves make for clean and accurate asphalt movement and distribution.
E n v i r o - F l u s h C l e a n i n g S y s t e m
Activate Enviro-FlushCleanout Cycle. Automated valve opens and adds a small amount of solvent to the system.
Cleanout cycle opensre-circulate valve to flush solvent through the entire spray system
Reopen Enviro-Flushvalve and reverse pump to return solvent to 25-gallon tank to bereused again and again.
Material is contained in the tank until it can be disposed of at an environmentally safe location.
1 2 43and bar.
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerPlus-1 Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the Plus-1 Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
Plus-1 ControllerPlus-1 Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
Automatic Valve ControlAutomatically controlled by the Plus-1 Controller,valves make for clean and accurate asphalt movement and distribution.
E n v i r o - F l u s h C l e a n i n g S y s t e m
Activate Enviro-FlushCleanout Cycle. Automated valve opens and adds a small amount of solvent to the system.
Cleanout cycle opensre-circulate valve to flush solvent through the entire spray system
Reopen Enviro-Flushvalve and reverse pump to return solvent to 25-gallon tank to bereused again and again.
Material is contained in the tank until it can be disposed of at an environmentally safe location.
1 2 43and bar.
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerPlus-1 Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the Plus-1 Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
Plus-1 ControllerPlus-1 Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
Automatic Valve ControlAutomatically controlled by the Plus-1 Controller,valves make for clean and accurate asphalt movement and distribution.
E n v i r o - F l u s h C l e a n i n g S y s t e m
Activate Enviro-FlushCleanout Cycle. Automated valve opens and adds a small amount of solvent to the system.
Cleanout cycle opensre-circulate valve to flush solvent through the entire spray system
Reopen Enviro-Flushvalve and reverse pump to return solvent to 25-gallon tank to bereused again and again.
Material is contained in the tank until it can be disposed of at an environmentally safe location.
1 2 43and bar.
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerPlus-1 Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the Plus-1 Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
CAPACITY• 1,000 U.S. gallons (3,785 L)
to 4,000 gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced and
flanged heads• All seams electrically-welded, inside
and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with .05 in.
(1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at rear of
tank with cleanout plug• Suction line from pump includes tank
cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14 gauge (1.9 mm) stainless steel at
rear with hood
THERMOMETER• 4- in. (102mm) dial thermometer • Armored pencil inspectors type,
20 to 500 degrees on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head mounted
BURNERS
• Diesel- fired burner(s) with standard electronic ignition
• Or liquid withdrawal LPG burner(s) with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally-friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-2S control system for control of
all distributor functions from the cab• Display includes selectable readouts
for pump GPM, truck FPM, applica-tion rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow,speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar circulate On/Off, spraybar lift and shift, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
• Optional cab controls for spraybar wing-folds and control of spraybar in1-ft. increments
ASPHALT PUMP• Viking MV1054, 4-in. (102 mm) 400
GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• On/Off controls in cab by spraybar
sections• Spraybar lift and shift• Auto valve functions• Optional On/Off of spraybar in 1- ft.
(.3 m) increments• Optional controls in cab and at rear
for hydraulic folding of spraybar wing sections
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suitable for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission drive
of hydraulics
SPRAYBAR• EZ-Spray, 12- ft (3.7 m) fully
circulating spraybar• Two 4- ft. (1.2 m) center sections
and two 2- ft (.6 m) folding sections, 2 compartment sections
• 4- in. (102 mm) nozzle spacing with individual quick disconnect valves for each nozzle
• Power lift and shift of spraybar• Exclusive two-way safety breakaway
feature• All spray valves are internally
mounted for continuous heating and minimized plugging
NOZZLES• Standard brass V-jet, 4 -in. (102 mm)
centers
GROUND SPEED• GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose• Rear bumper
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system• 4-way power mirror• 2- or 3-nozzle handspray wand • 1- ft. (.3 m) spraybar extensions• 2- ft. (.6 m) spraybar extensions
FINISH• Enamel black paint with aluminum
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
1,000- to 4,000- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel-fired Burner with Heat Limit Control
rabyarpS gnitalucriC toof -21 htiw rellortnoC baC-nI 1-sulP
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot Increments
Enviro-Flush Clean Out System
LPG Burner in lieu of Diesel Burner (52-gallon LP tank)
Cab Control Folding Wings
18- or 20-foot EZ-Spray Extendible, Fully Circulating SpraybarWash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptional
1,000- to 4,000- gallon Capacity Tank400 GPM Viking Asphalt Pump
rabyarpS gnitalucriC ylluF elbidnetxE yarpS-ZE toof -61 ot -8Plus-1 In-Cab Controller8-inch diameter Hi-Lo Double Heating FlueDiesel-fired Burner with Heat Limit Control5- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System
LPG Burner in lieu of Diesel Burner (52-gallon LP tank)
Wash Down System for Spraybar Cleaning
Maximizer 3
5-inch Dial Thermometer and Armored Pencil Thermometer
OptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot ot 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway
1- or 2- foot Spraybar Extensions Optional
Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
1,000- to 4,000- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel-fired Burner with Heat Limit Control
rabyarpS gnitalucriC toof -21 htiw rellortnoC baC-nI 1-sulP
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot Increments
Enviro-Flush Clean Out System
LPG Burner in lieu of Diesel Burner (52-gallon LP tank)
Cab Control Folding Wings
18- or 20-foot EZ-Spray Extendible, Fully Circulating SpraybarWash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptional
1,000- to 4,000- gallon Capacity Tank400 GPM Viking Asphalt Pump
rabyarpS gnitalucriC ylluF elbidnetxE yarpS-ZE toof -61 ot -8Plus-1 In-Cab Controller8-inch diameter Hi-Lo Double Heating FlueDiesel-fired Burner with Heat Limit Control5- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System
LPG Burner in lieu of Diesel Burner (52-gallon LP tank)
Wash Down System for Spraybar Cleaning
Maximizer 3
5-inch Dial Thermometer and Armored Pencil Thermometer
OptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot ot 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway
1- or 2- foot Spraybar Extensions Optional
Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
1,000- to 4,000- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel-fired Burner with Heat Limit Control
rabyarpS gnitalucriC toof -21 htiw rellortnoC baC-nI 1-sulP
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot Increments
Enviro-Flush Clean Out System
LPG Burner in lieu of Diesel Burner (52-gallon LP tank)
Cab Control Folding Wings
18- or 20-foot EZ-Spray Extendible, Fully Circulating SpraybarWash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptional
1,000- to 4,000- gallon Capacity Tank400 GPM Viking Asphalt Pump
rabyarpS gnitalucriC ylluF elbidnetxE yarpS-ZE toof -61 ot -8Plus-1 In-Cab Controller8-inch diameter Hi-Lo Double Heating FlueDiesel-fired Burner with Heat Limit Control5- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System
LPG Burner in lieu of Diesel Burner (52-gallon LP tank)
Wash Down System for Spraybar Cleaning
Maximizer 3
5-inch Dial Thermometer and Armored Pencil Thermometer
OptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot ot 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway
1- or 2- foot Spraybar Extensions Optional
Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
Max 3/II, 04-2013
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
1,000- to 4,000- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel-fired Burner with Heat Limit Control
rabyarpS gnitalucriC toof -21 htiw rellortnoC baC-nI 1-sulP
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot Increments
Enviro-Flush Clean Out System
LPG Burner in lieu of Diesel Burner (52-gallon LP tank)
Cab Control Folding Wings
18- or 20-foot EZ-Spray Extendible, Fully Circulating SpraybarWash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptional
1,000- to 4,000- gallon Capacity Tank400 GPM Viking Asphalt Pump
rabyarpS gnitalucriC ylluF elbidnetxE yarpS-ZE toof -61 ot -8Plus-1 In-Cab Controller8-inch diameter Hi-Lo Double Heating FlueDiesel-fired Burner with Heat Limit Control5- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System
LPG Burner in lieu of Diesel Burner (52-gallon LP tank)
Wash Down System for Spraybar Cleaning
Maximizer 3
5-inch Dial Thermometer and Armored Pencil Thermometer
OptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot ot 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway
1- or 2- foot Spraybar Extensions Optional
Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Maximizer 3 Features & Benefits Maximizer II Best In ClassMaximizer II & 3 Common Features Configurations
Configuration Checklist
12- month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt PumpManual Spraybar Lock Assembly8-inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit ControlEZ-2S In-Cab Controller with 12- foot Circulating Spraybar
1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsIn-Cab Control of Spraybar in 1- foot IncrementsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52-gallon LP tank)Cab Control Folding Wings 1- or 2- foot Spraybar Extensions Wash Down System for Spraybar Cleaning
Maximizer II
OptionalOptionalOptionalOptional
Configuration Checklist
12-month Warranty / Unlimited Hours1,100- to 4,100- gallon Capacity Tank400 GPM Viking Asphalt Pump8- to 16- foot EZ-Spray Extendible Fully Circulating SpraybarEZ-3S In-Cab Controller8- inch diameter Hi-Lo Double Heating FlueDiesel- fired Burner with Heat Limit Control4- inch Dial Thermometer and Armored Pencil Thermometer1- inch Sampling ValveFront and Rear Dial Contents GaugesSingle Nozzle Handspray WandMeets Federal DOT Hot Asphalt RegulationsEnviro-Flush Clean Out System LPG Burner in lieu of Diesel Burner (52- gallon LP tank) 18- or 20-foot EZ-Spray Extendible, Fully Circulating Spraybar Wash Down System for Spraybar Cleaning
Maximizer 3
OptionalOptionalOptional
Efficient Corners and Smooth TapersExtend bar into radiusshots or taper for lessunit maneuvering and amore efficient job.
Rosco’s Maximizer 3asphalt distributor fea-tures an extendiblespraybar that smoothlymoves from 8-foot to 20-foot width in 4-inchincrements. The EZ-Spray extendible spray-bar makes radius andtaper spraying, alongwith maneuvering forobstacles such asbridges, a smooth andefficient operation.
Self-Contained Valve OperationIndividually controlledvalves incorporate aircylinder into the valveeliminating external exposure of linkages or cylinder rods.
Safety Breakaway Avoid ObstaclesOn-The-MoveOne-foot breakaway at
the bar’s end preventsdamage if an impactwith an obstacle occurs.
Retract bar for obstacles such asbridges without maneuvering unit.
EZ Spray ExtendibleSpraybar
Spraybar extends continuously in 4-inch increments in either direction allowing operator to make the shotwithout overlapping or gapping.
Rosco's Maximizer II asphalt distributor puts the operator infull control from the clean, safecomfort of the cab. MaximizerII's EZ-2S controller controlsapplication rate and spraywidth in 1-foot sections whileon the move. The Vikingasphalt pump and clog-freespraybar valves makeMaximizer II a reliable work-horse on the job. Clean-up is asnap with the Enviro-Flushclean out system.
Internal spraybar valvesare surrounded by hotasphalt during operationand solvent during clean out – eliminatesclogging.
Center Breakaway
Clog-Free Valves
Prevents damage tospraybar from eitherdirection – across entire width of spraybar.
Full Circulation Spraybar One-Foot Control Spraybar
Full circulation of material flowthrough entire system preventsbuild up from tank to spraybarends. Clean out of pump, valvesand spraybar is complete evenwith heavy grade materials.
Open or close any one-footsection of the spraybar fromthe cab.
Spraybar Extensions
Extend width of spraybar by addingspraybar extensions. Hydraulicallyraise or lower extensions whenneeded.
Open Enviro-flush valveand add a small amountof solvent to system.
Open re-circulate valve to flush solvent throughentire spray system andbar.
Reopen Enviro-flush valve and reverse pump to return solvent totwenty-five gallon tankto be reused again andagain.
Material is containedin tank until it can be disposed at anenvironmentally safelocation.
Viking Asphalt PumpThe Viking asphalt pump minimizes asphaltdamage and provides greater reverse suctionfor full system clean out.
Clean StartsStart, stop and restart material flow with a clean, clear line. (Maximizer 3’s staggered bar is synchronized to start and stop cleanly.)
EZ-S ControllerEZ-S Controller controls spray, bar circulate andspray width while on the move. Monitor or change material application as needed. Complete,automatic switching without touching hot valves.
H o w I t W o r k s
Automatic Valve ControlAutomatically controlled by the EZ-S Controller,valves make for clean and accurate asphalt movement and distribution.
1 2 43
E n v i r o - F l u s h C l e a n i n g S y s t e m
4- inch Dial Thermometer and Armored Pencil Thermometer
Contact yourLeeBoy dealer:
RMAX II/3 02/10-3K#13278
CAPACITY• 1,000 U.S. gallons (3,785 L) to
4,000 U.S. gallons (15,142 L) w/overage for expansion
TANK TYPE• Elliptical shape• Full cross section, 10 gauge
(3.4 mm) surge plates w/staggered openings
• Meets all applicable Federal tank regulations for asphalt distributors
TANK MATERIAL• Steel, 10 gauge (3.4 mm) shell • 7 gauge (4.5 mm) reinforced
and flanged heads• All seams electrically-welded,
inside and out
INSULATION AND JACKET• 2- in. (51 mm) thickness with
.05 in. (1 mm) weatherproof aluminum jacket
MANHOLE• 22- in. (559 mm) diameter with
weather-tight and safety relieving cover
• Inside splash guards• 3- in. (76 mm) diameter overflow• Steel measuring stick• Basket type strainer
SUMP• 8- in. (203 mm) diameter at
rear of tank with cleanout plug• Suction line from pump includes
tank cutoff valve
HEATING FLUES• Hi-Lo double flue with 8- in. (203 mm)
inside diameter tubing with square return bend configuration
EXHAUST STACK• 14- gauge (1.9 mm) stainless
steel at rear with hood
THERMOMETER• 4-in. (102 mm) dial thermometer• Armored pencil inspectors type,
20 to 500 degree os on side of tank in pipe well
• In cab digital reading
CONTENTS GAUGE• Float type, continuous reading in
50- gallon (189 L) increments• Front and rear tank head
mounted
BURNERS• Diesel -fired burner(s) with
standard electronic ignition• Or liquid withdrawal LPG burner(s)
with pressure regulators and necessary LP connections to frame mount 52-gallon tank, std.
• Optional LPG electronic control (ignition, outfire, temperature limit)
FLUSH TANK• 25 gallons (95 L) with connections
to asphalt pump for clean out of pump and piping
• Enviro-Flush clean out system for environmentally- friendly handling of cleaning solvent
AUTO FUNCTION FROM CAB DISTRIBUTOR CONTROLS• EZ-3S control system for control
of all distributor functions from the cab
• Display includes selectable readoutsfor pump GPM, truck FPM, application rate, spraybar length, distance traveled, gallons sprayed, digital in cab tank contents temperature, flow, speed calibration, spraybar width, hour meter and total area sprayed (including metric readings)
• 6 preset settings for application rate and flow calibration
• Panel includes control for spraybar, circulate On/Off, and auto valve selection for load, transfer, tank circulate, spray, handspray and clean out functions
• Provides accurate application regardless of changes in speed or spraybar width during operation
ASPHALT PUMP• Viking MV1054, 4- in. (102 mm)
400 GPM/1,514 LPM capacity positive displacement, rotary gear pump
• Located at rear of unit with suction piping to tank sump
CAB CONTROL• Controls in cab for spraybar circu-
late On/Off 1 ft. (.3 m) increments on outer 4- ft. of both spraybars
• Bar turns On/Off in 4” (102 mm) increments as is extended or retracted
• Auto valve functions
ASPHALT PUMP DRIVE• Hydrostatic, variable displacement
hydraulic pump, front live power driven (truck chassis must be suit-able for front live power), with fixed displacement hydraulic motor
• Control in cab to adjust speed of asphalt pump with additional rear control
• 20- gallon (76 L) hydraulic reservoir• Optional PTO from transmission
drive of hydraulics
SPRAYBAR• EZ-Spray spraybar, variable from 8-
to 16- ft. (2.43 m - 4.87 m) in width• Fully circulating bars via cab controls
and automatic turn on and shut off while extending and retracting
• Two- way safety breakaway at end of each bar
• 4- in. (102 mm) nozzle spacing and individual quick disconnect valves for each nozzle
• All spray valves are internally mounted for continuous heating and minimized plugging
• Cab control of spraying and circulation
• Extension and lift of spraybar controlled from cab and rear control box
NOZZLES• Standard brass V-jet, 4-in.
(102 mm) centers
GROUND SPEED • GPS to accurately measure
speed and distance traveled
MISCELLANEOUS EQUIPMENT• Transfer valve with quick coupler• 4-way heated mirror• Rear bumper• Back-up alarm• Single nozzle handspray wand with
25- ft. (7.6 m) hose
OPTIONAL EQUIPMENT• Rubber or steel loading hose• Washdown system • 2- or 3-nozzle handspray wand •
FINISH• Enamel black paint with aluminum
Maximizer ll Specifications
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
• Cab control of spraying and circulation
• Optional radar horn
Maximizer ll
®
Asphalt Distributors
Designed with the Paving Professional in Mind.
Features include: ••••
Maximizer ll Asphalt Distributor
12-foot Fully Circulating SpraybarAutomatic In-Cab ControlsAccurate Application from Start to FinishInternal Spraybar Valves
•••
400 GPM Viking Asphalt PumpEnviro-Flush Clean Out SystemSpraybar Extension Options up to 24-foot
LeeBoy has designed and manufactured superiorasphalt paving and grading products since 1964. The LeeBoy brand is well-known for its quality and innovative design. This standard of quality provides contractors with dependable, lowmaintenance equipment with a high re-sale value.
“LeeBoy is dedicated to providing top quality parts and service support on every unit sold.”
Maximizer 3
®
Features include: •••••
••••
Asphalt Distributors
Designed with the Paving Professional in Mind.
Maximizer 3 Asphalt Distributor
8- to 16-foot EZ-Spray Extendible SpraybarAutomatic In-Cab ControlsStraight-line Start and StopTapered and Radius SprayingInternal Spraybar Valves
400 GPM Viking Asphalt PumpFully Circulating SpraybarEnviro-Flush Clean Out System18- to 20-foot Spraybar Width Options
• Optional radar horn
18- or 20-ft. EZ-Spray extendiblespraybar system
Maximizer 3 Specifications
LeeBoy makes continuous improvements in all its products. We reservethe right to change specifications without notice. Photos and illustrationsmay contain standard and optional equipment.
VT LeeBoy, Inc. • 500 Lincoln County Pkwy. Ext. • Lincolnton, North Carolina 28092 • www.leeboy.com • (704) 966-3300
LeeBoy makes continuous improvements to all its products and reserves the right to change specifications without notice. Photos and illustrations may contain standard and optional equipment.