1
ASSAM POWER DISTRIBUTIOM CO. LTD,
Upper Assam Region
CORRIGENDUM NOTICE
Ref: - NIT No. CGM (D)/APDCL/UAR/AP-2015-16/GEC/2016/
This is for general information of all the intending bidders that the amendments of items as follows are as mentioned hereunder. A) Quantities and items as per Revised BOQ & PRICE BID AS UPLOADED IN THE WEBSITE TO BE USED. B) All other terms & conditions are remaining unaltered. Details may be seen in the website www.apdcl.gov.in
Chief General Manager (D), UAR, APDCL, 6th floor, Bijulee Bhawan,
Paltanbazar, Guwahati-781001
3
Standard BOQ for renovation in the Distribution network and addition of new HT and LT lines along with11/0.4 KV, Sub-Stations under Golaghat Electrical Circle, APDCL (UAR).
Package No: - AP/GEC/01. (A)Work specification: - Construction of New 11 KV Line with
Raccoon Conductor with 9.75 Mtr length PSC Pole (Total Line Length= 26.0 Ckt. KM)
Sl.
No Item Description for supply and erection Unit Qty
1 PSC Pole 9.75 mtr Nos 700
2. 11KV G.I. T- cross arm along with angle (50x50x6)mm Nos 426
3 11KV Pin Insulator (Polymer) Nos 1568
4 11KV Disc Insulator (Polymer) (70 KN) with H/W fittings & Tension Clamp set 840
5 11KV GI Channel cross arm (100x40x6x2200)mm Nos 300
6 11KV GI Channel cross arm (75x40x6x2200)mm Nos 156
7 G.I. Angle cross bracing (50x50x6) mm Mtr 584
8 H.T. Stay set (Complete) set 182
9 H.T. Guy Insulator (Porcelain) Nos 182
10 H.T Stay wire 7/14 SWG kg 1820
11 AAA Raccoon Conductor km 81
12 G.I. Nuts & Bolts with GI washer (Assorted) kg 2000
13 P.G. Clamp for Raccoon Nos 664
14 G.I.Wire 8 SWG ( Guarding) kg 2600
15 Barbed Wire Kg 1400
16 11KV Danger plate No 700
17 11KV Auto Re closure No 1
18 Pole Clamp No 700
4
Package No:- AP/GEC/01 (B) Work specification: -. Renovation of 33KV Usha Feeder (Total
Line Length = 12.5 KM))
Sl.
No. Item Description for supply and erection Unit Qty
1 PSC pole, 9.75 mtrs. Nos 28
2. AAA Wolf Conductor Km 39
3 33 kV GI Channel cross arm(100x50x6x3200)mm with top clit Nos 40
4 33 kV GI V cross arm(100x50x6)mm Nos 20
5 33 kV Polymer Disc Insulator 90 KN & H/W fittings Nos 112
6 33 kV Polymer Pin Insulator Nos 120
7 HT Stay complete set with Guy insulator and 7/14 Stay wire Set 42
8 GI wire 6 SWG Kg 250
9 GI wire 8 SWG ( Guarding) Kg 250
10 GI angle (40x40x5)mm for guarding Mtr 80
11 GI Pole clamp(50x6)mm Nos 150
12 GI nuts & bolts assorted Kg 200
13 PG Clamp Nos 50
5
Package No:- AP/GEC/01 (C) BOQ for Bifurcation of 11KV Merapani feeder
( Line Length= 1.5 KM))
Sl No Items unit Qty
1 PSC Pole 9.75 mtr Nos 35
2 11KV G.I. T-cross arm along with angle (50x50x6)mm Nos 24
3 11KV Pin Insulator (Polymer) Nos 96
4 11KV Disc Insulator (Polymer) (70 KN) with H/W fittings set 45
5 11KV GI Channel cross arm (100x40x6x2200)mm Nos 16
6 G.I. Angle (50x50x6) mm Mtr 48
7 H.T. Stay set (Complete) set 8
8 H.T. Guy Insulator (Porcelain) Nos 8
9 H.T Stay wire 7/14 SWG kg 56
10 AAA Raccon Conductor km 5
11 G.I. Nuts & Bolts with GI washer (Assorted) kg 45
12 11 KV XLPE Cable 3 Core, 185 Srq mm (Aluminium) Mtr 50
13 11 KV XLPE Cable kit 3 Core, 185 Srq mm (outdoor) No 1
14 11 KV XLPE Cable kit 3 Core, 185 Srq mm (indoor) No 1
15 GI Cable clamp No 4
16 11 KV GOAB 400 Amps No 1
17 Pole Clamp of GI flat (50x6)mm No 16
18 C.I. Earth Pipe 1.8 mtr Nos 3
19 P.G. Clamp for Reccon Nos 42
20 G.I.Wire 6 SWG Kg 150
21 G.I.Wire 8 SWG Kg 80
22 I Hook GI No 60
23 11 KV, 9 KA LA line type Set 1
24 Barbed Wire Kg 35
25 Bimetallic lugs for cable jointing No 9
26 11KV Danger plate No 35
6
Package No:- AP/GEC/02. (A) Work specification: - Construction of New LT 3 Phase,4 Wire Line
with Weasel conductor and 8.5 mtr length PSC pole (Total parameters= 60 Ckt. KM)
Sl.
No. Item Description for supply and erection Unit Qty
1 PSC Pole 8.5 meter No 1320
2. AAA Weasel Conductor Km 252
3 G.I LT X arm (40x40x5x500)mm with angle back clamp Nos 2640
4 L.T. Danger Plate. No 1320
5 LT Shackle insulator with GI Strips Set 1200
6 LT Pin insulator with GI Pin No 4080
7 LT Stay Set Complete Set 360
8 LT Guy Insulator No 360
9 GI Stay Wire 7/10 SWG Kg 3600
10 Jointing Sleeve No 240
11 GI Nuts & bolts assorted Kg 1500
7
Package No:- AP/GEC/02. (B) Work specification: - Conversion of LT 1 Ph 2 Wire to 3 Ph
4 Wire with Weasel conductor( Total Parameters= 100 Ckt. KM)
1 AAA Weasel Conductor Km 210
2 G.I LT X arm (40x40x5x500)mm with angle back clamp Nos 2400
3 L.T. Danger Plate. No 500
4 LT Shackle insulator with GI Strips Set 1600
5 LT Pin insulator with GI Pin No 3200
6 GI Nuts & bolts assorted Kg 1200
8
Package No:- AP/GEC/03. (A) Work specification: -Construction of 11/0.4 KV, 25KVA Sub
Station with Pole (Total No= 30 no’s)
Sl.
No. Item Description for supply and erection Unit Qty
1 PSC Pole 9.75 mtr Nos 60
2. 11KV Pin Insulator (Polymeric) Nos 90
3 11KV Disc Insulator (Polymeric) with H/w fitting (70 KN) set 180
4 11KV GI Channel cross arm (100x40x6x2200)mm Nos 240
5 H.T. Stay set (Complete) set 60
6 H.T. Guy Insulator (Porcelain) Nos 60
7 H.T Stay wire 7/14 SWG kg 600
8 AAA Weasel Conductor km 3.0
9 Nuts & Bolts with GI washer (Assorted) kg 450
10 Transformer 11/0.4 KV 25 KVA (3 Star) ( New Transformer= 10 Nos to be procured ) ( APDCL supply Transformer= 20 Nos received form dismantled)
Nos 30
11 11KV D.O. fuse set 150 A set 30
12 12KV 9 KA Lighting arrester line Type Set 30
13 11KV Gang operated switch 150 Amps set 30
14 C.I. Earth Pipe 1.8 mtr Nos 180
15 PG Clamp for Weasel No 180
16 LT XLPE 1 core cable 95 sqmm( Aluminum) Mt 1200
17 GI Wire 6 SWG KG 900
18 LT XLPE 1 core cable75/50sqmm( Aluminum) Mt 1800
19 DTR Cubicle for 25 KVA DTRs No 30
20 Aluminum lug 150/120 mm Nos 360
21 Transformer Fencing No 30
22 11KV Danger plate No 150
9
Package No:- AP/GEC/03 (B) Work specification: - Augmentation from 16/25 KVA to 63 KVA
Sub-Station (Total Qty 25KVA = 20 Nos & 16 KVA= 70 Nos))
Sl.
No. Item Description for supply and erection Unit Qty
1 11KV Pin Insulator (Polymeric) Nos 540
2. AAA Weasel Conductor km 9.0
3 Nuts & Bolts with GI washer (Assorted) kg 1800
4 Transformer 11/0.4 KV 63 KVA (3 Star) Nos 90
5 11KV D.O. fuse set 150 A set 90
6 12KV 9 KA Lighting arrester line Type Set 90
7 11KV Gang operated switch 150 Amps set 90
8 C.I. Earth Pipe 1.8 mtr Nos 540
9 LT XLPE 1 core cable 120 sqmm( Aluminium) Mt 3600
10 LT XLPE 1 core cable 95 sqmm( Aluminium) Mt 10800
11 GI Wire 6 SWG KG 2700
12 DTR Cubicle for 63 KVA DTRs No 90
13 Transformer fencing No 90
14 Aluminium lug 95/120 mm Nos 1350
15 11KV Danger plate No 180
16 Dismantling of existing Sub-Stations No 90
10
Package No:- AP/GEC/04 (A) Work specification: - Construction of 11/0.4 KV, 63 KVA Sub
Station with Pole (Total No= 30 no’s )
Sl.
No. Item Description for supply and erection Unit Qty
1 PSC Pole 9.75 mtr Nos 60
2. 11KV Pin Insulator (Polymeric) Nos 90
3 11KV Disc Insulator (Polymeric) with H/w fitting (70 KN) set 180
4 11KV GI Channel cross arm (100x40x6x2200)mm Nos 240
5 H.T. Stay set (Complete) set 60
6 H.T. Guy Insulator (Porcelain) Nos 60
7 H.T Stay wire 7/14 SWG kg 600
8 AAA Weasel Conductor km 3.0
9 Nuts & Bolts with GI washer (Assorted) kg 450
10 Transformer 11/0.4 KV 63 KVA (3 Star) ( New Transformer= 19 Nos to be procured ) ( APDCL supply Transformer= 11 Nos received form dismantled)
Nos 30
11 11KV D.O. fuse set 150 A set 30
12 12KV 9 KA Lighting arrester line Type Set 30
13 11KV Gang operated switch 150 Amps set 30
14 C.I. Earth Pipe 1.8 mtr Nos 180
15 PG Clamp for Weasel No 180
16 LT XLPE 1 core cable 120 sqmm( Aluminium) Mt 1200
17 LT XLPE 1 core cable 95 sqmm( Aluminium) Mt 3600
18 GI Wire 6 SWG KG 900
19 DTR Cubicle for 63 KVA DTRs No 30
20 Transformer fencing No 30
21 Aluminium lug 95/120 mm Nos 450
22 11KV Danger plate No 150
11
Package No:- AP/GEC/04 (B) Work specification: - Augmentation of 63 KVA Sub-Station to
100 KVA (Total Qty from 63 KVA to 100KVA = 11 Nos)
Sl.
No. Item Description for supply and erection Unit Qty
1 11KV Pin Insulator (Polymeric) Nos 66
2. AAA Weasel Conductor km 1.1
3 Nuts & Bolts with GI washer (Assorted) kg 220
4 Transformer 11/0.4 KV 100 KVA (3 Star) ( New transformer=10 Nos to be procured ) ( APDCL supply Transformer= 1 No received form dismantled)
Nos 11
5 11KV D.O. fuse set 150 A set 11
6 12KV 9 KA Lighting arrester line Type Set 11
7 11KV Gang operated switch 150 Amps set 11
8 C.I. Earth Pipe 1.8 mtr Nos 66
9 LT XLPE 1 core cable 150 sqmm( Aluminium) Mt 440
10 LT XLPE 1 core cable 120 sqmm( Aluminium) Mt 1100
11 GI Wire 6 SWG KG 330
12 DTR Cubicle for 100 KVA DTRs No 11
13 Transformer fencing No 11
14 Aluminium lug 150/120 mm Nos 165
15 11KV Danger plate No 22
16 Dismantling of existing Sub-Stations No 11
12
Package No:- AP/GEC/04 (C) Work specification: -. Augmentation from 100 KVA Sub-
Station to 250 KVA Sub-Station (Total Qty = 1 Nos))
Sl.
No. Item Description for supply and erection Unit Qty
1 11KV Pin Insulator (Polymeric) Nos 6
2. AAA Weasel Conductor km 0.1
3 Nuts & Bolts with GI washer (Assorted) kg 20
4 Transformer 11/0.4 KV 250 KVA (3 Star) Nos 1
5 11KV D.O. fuse set 150 A set 1
6 12KV 9 KA Lighting arrester line Type Set 1
7 11KV Gang operated switch 150 Amps set 1
8 C.I. Earth Pipe 1.8 mtr Nos 6
9 LT XLPE 1 core cable 240 sqmm (Aluminium) Mt 40
10 LT XLPE 1 core cable 185 sqmm (Aluminium) Mt 100
11 G.I.Wire 6 SWG kg 30
12 DTR Cubicle for 250 KVA DTRs No 1
13 Transformer fencing No 1
14 Aluminium lug 185/240 mm Nos 15
15 11KV Danger plate No 2
16 DTR pad No 1
17 Dismantling of existing Sub-Stations No 1
13
Package No:- AP/GEC/04 (D) Work specification: - fencing around Transformer
( Total Nos= 25 Nos)
Sl.
No. Item Description for supply and erection Unit Qty
1 fencing around Transformer No 25
Package No:- AP/GEC/04 (E) Work specification: - Transformer Pad ( Total No’s= 20 No’s)
Sl.
No. Item Description for supply and erection Unit Qty
1 Transformer Pad as per APDCL norms No 20
14
NIT NO. CGM (D)/APDCL/UAR/AP-2015-16/GEC/2016
Annexure -II
Tender Proforma Part-II (PRICE BID)
Sl.
No. Item description Unit Qty
FORD cost of
materials
in Rs
Cost of Erection of
materials inclusive of
testing &
commissioning
in Rs
Total Price
in Rs.
WCT@
5% (on
9) (in
Rs.)
Service tax
@ 14.5 on
(8) (in Rs.)
Total
quoted
Rate
in Rs. Unit
Rate Total Unit Rate Total
1 2 3 4 5 6=4X5 7 8=4X7 9=6+8 10=9X5% 11=8 X 14.5 % 12=9+10+11
A Package NO:- AP/GEC/01, (A) Name of Work:- Construction of new 11KV Line with Raccoon Conductor & 9.75 M length PSC pole (26.0 KM)
1
Supply & erection of 9.75 M P.S.C. pole perpendicular to ground level including excavation of earth pit having depth 1/6 in the length of pole and a cross section of 0.75 Mtr. X 0.65 Mtr with edge brick soling, bolder packing, including complete with refilling with soil & ramming including boulder Packing as per TS
No 700
2
Supply, fitting & fixing of G I Channel cross
arm size 100x50x6x2.2 M in 2 pole/3 pole/4
pole structure of H T lines, drilling of holes
including proper G I pole clamps and nuts &
bolts as per TS
No 300
3
Supply, Fitting & Fixing of GI Angle
(50x50x6mm) for guard bracket on pole structure
for 11kV line with necessary GI pole clamps
including Nuts & Bolts, Clamps, drilling of holes
etc with fitting of GI wire 8SWG for guarding as
per direction and TS
584
4
Supply fitting & fixing of G I 11 KV “T” cross arm
( made of 50x50x6 mm angle) on pole with proper
clamp and nuts & bolts as per TS No 426
15
5
Supply, fitting & fixing of 11 KV polymeric
composite pin insulator with pin on cross arm as
per TS
NO 1568
6
Supply, fitting & fixing 70 KN polymeric composite
disc insulator with hardware fittings on cross arm
as per TS
Set 840
7
Supply and stringing of AAA Raccoon conductor
in H T lines with laying conductor on
ground,liftings on poles, tensioning with tension
clamps, binding on insulator, jumpering with P G
Clamp on single/2pole/3pole/4 pole structure
including supply & fittings of tension clamps, nuts
& bolts as per TS with standard sagging in each
and every span.
KM
81.0
8
Supply, fitting & fixing of H T stay set complete
including digging of earth pit of area 0.9 m x 0.6m
and depth 1.4 M placing in stay rod with G I stay
wire & guy insulator on the pole clamps, fixing
thimble bow with boulder packing & hard ramming
to fill up have the pit and earth packing up to
ground level including supply of
boulder,clamps,nuts & bolts as per TS
Set 182
9
Supply fitting & fixing of H T danger plate on pole
as directed. NO 700
10
Supply, fitting and fixing of Barbed wire as
per direction and TS(1.8 kg per pole for ant
climbing device)
Kg 1400
11
Supply, installation, testing and
commissioning of 11KV Auto Rsclouser at
sending end
No 1
12
Supply, fitting & fixing of G I Channel cross
arm size 75x40x6x2.2 M in 2 pole/3 pole/4
pole structure of H T lines, drilling of holes
including proper G I pole clamps and nuts &
No 156
16
bolts as per TS
13 Supply, fitting & fixing of G I Wire 8swg for guarding
kg 2600
B Package NO: - AP/GEC/01 (B), Name of Works: - Renovation of 33KV Usha Feeder (12.5 KM). ( Annexure-II)
1
Supply & erection of 9.75 M P.S.C. pole perpendicular to ground level including excavation of earth pit having depth 1/6 in the length of pole and a cross section of 0.75 Mtr. X 0.65 Mtr with edge brick soling, bolder packing, including complete with refilling with soil & ramming including boulder Packing as per TS
No 28
2
Supply, Fitting & Fixing of 33 KV GI Angle (40x40x5 mm) for
guard bracket on pole structure for 33kV line with necessary GI
pole clamps including Nuts & Bolts, Clamps, drilling of holes
etc with fitting of GI wire 8SWG for guarding as per direction
and TS
Mtr 80
3
Supply fitting & fixing of G I 33 KV “V” cross arm with Top clit (
made of 100x50x6 mm angle) on pole with proper clamp and
nuts & bolts as per TS No
20
4
Supply, fitting & fixing of 33 KV G I Channel cross arm
size 100x50x6x3.2 M in 2 pole/3 pole/4 pole structure of
H T lines, drilling of holes including proper G I pole
clamps and nuts & bolts as per TS
No 40
5 Supply, fitting & fixing of 33 KV polymeric composite pin
insulator with pin on cross arm as per TS NO 120
17
6
Supply, fitting & fixing of 90KN polymeric composite Disc
insulator with hardware fittings as per TS Set 112
7
Supply and stringing of AAA Wolf conductor in H T lines with
laying conductor on ground,liftings on poles, tensioning with
tension clamps, binding on insulator, jumpering with P G Clamp
on single/2pole/3pole/4 pole structure including supply & fittings
of tension clamps, nuts & bolts as per TS with standard sagging
in each and every span.
KM
39.0
8
Supply, fitting & fixing of H T stay set complete including digging
of earth pit of area 0.9 m x 0.6m and depth 1.4 M placing in stay
rod with G I stay wire & guy insulator on the pole clamps, fixing
thimble bow with boulder packing & hard ramming to fill up have
the pit and earth packing up to ground level including supply of
boulder,clamps,nuts & bolts as per TS
Set
42
9 Supply, fitting & fixing of G I Wire 6/8 swg kg
500
C Package NO:- AP/GEC/01, (C) Name of Works:- Bifurcation of 11KV Merapani Feeder ( 1.5 KM). ( Annexure-II)
1
Supply & erection of 9.75 M P.S.C. pole perpendicular to ground level including excavation of earth pit having depth 1/6 in the length of pole and a cross section of 0.75 Mtr. X 0.65 Mtr with edge brick soling, bolder packing, including complete with refilling with soil & ramming including boulder Packing as per TS
No 35
2
Supply, fitting & fixing of G I Channel cross arm size
100x40x6x2.2 M in 2 pole/3 pole/4 pole structure of H T
lines, drilling of holes including proper G I pole clamps
and nuts & bolts as per TS
No 16
3
Supply, Fitting & Fixing of GI Angle (50x50x6mm) for guard
bracket on pole structure for 11kV line with necessary GI pole
clamps including Nuts & Bolts, Clamps, drilling of holes etc
with fitting of GI wire 8SWG for guarding as per direction
and TS
Mt 48
18
4
Supply fitting & fixing of G I 11 KV “T” cross arm ( made of
50x50x6 mm angle) on pole with proper clamp and nuts &
bolts as per TS No
24
5 Supply, fitting & fixing of 11 KV polymeric composite pin
insulator with pin on cross arm as per TS NO 96
6 Supply, fitting & fixing 70 KN polymeric composite disc
insulator with hardware fittings on cross arm as per TS Set 45
7
Supply and stringing of AAA Raccoon conductor in H T lines
with laying conductor on ground,liftings on poles, tensioning
with tension clamps, binding on insulator, jumpering with P G
Clamp on single/2pole/3pole/4 pole structure including supply
& fittings of tension clamps, nuts & bolts as per TS with
standard sagging in each and every span.
KM
5.0
8
Supply, fitting & fixing of H T stay set complete including
digging of earth pit of area 0.9 m x 0.6m and depth 1.4 M
placing in stay rod with G I stay wire & guy insulator on the
pole clamps, fixing thimble bow with boulder packing & hard
ramming to fill up have the pit and earth packing up to ground
level including supply of boulder,clamps,nuts & bolts as per TS
Set 8
9 Supply fitting & fixing of H T danger plate on pole as directed. NO 35
10 Supply, fitting and fixing of Barbed wire as per direction
and TS(1.8 kg per pole for ant climbing device) Kg 35
11 Supply fitting & fixing of 11 KV L.A (9KN) on G.I. channel X
arm with drilling of holes, if and where necessary as per TS. SET 1
12 Supply, fitting & fixing 11 KV GOAB switches 400A including
supply of necessary clamps, nuts & bolts as per TS NO 1
13
Supply, fitting & fixing C I earth pipe by digging of pit as per
specification making the G I 6swg in turns (coil) and putting the
earth pipe with necessary connection as per TS
NO 3
14 Supply fitting & fixing of 11 KV XLPE cable 185 sqmm 3 core from indoor gear switch to outgoing feeder Mt
50
19
15 Supply fitting & fixing of 11 KV cable kit for XLPE cable 3 core 185 sqmm outdoor No
1
16 Supply fitting & fixing of 11 KV cable kit for XLPE cable 3 core 185 sqmm indoor No
1
17 Supply, fitting & fixing of G I Wire 6/8 swg kg
230
Package NO:- AP/GEC/02, Annexure-II A Name of Works: - (A) Construction of new LT 3 phases 4 wires Line with weasel conductor with 8.5 Mtr PSC pole. ( Line Length= 60.0 Ckt. KM)
1
Supply & erection of 8.5 M P.S.C. pole
perpendicular to ground level including excavation
of earth pit having depth 1/6 in the length of pole
and a cross section of 0.65 Mtr. 2X 0.65 Mtr with
edge brick soling, bolder packing, including
complete with refilling with soil & ramming as per
TS
NO 1320
2
Supply, fitting & fixing of G.I. L T angle cross arm (
40x40x5x500) mm with angle back clamp in poles of L T
line, drilling of holes including proper clamps and nuts &
bolts as per TS
NO 2640
3 Supply, fitting & fixing of L T pin insulator with pin on
cross arm as per TS NO 4080
4 Supply, fitting & fixing L T shackle insulator with straps
on L T cross arm with necessary holes as per TS SET 1200
5
Supply, fitting & fixing of L T stay set complete including
digging of earth pit placing in stay rod with G I stay wire
& guy insulator on the pole clamps, fixing thimble bow
with boulder packing & hard ramming to fill up have the
pit and earth packing up to ground level including supply
SET 360
20
of boulder,clamps,nuts & bolts as per TS
6
Supply and stringing of AAAC Weasel conductor in L T
lines with laying conductor on ground,liftings on poles,
tensioning, binding on insulator with jointing sleeve,
jumpering on pole including supply & fittings of nuts &
bolts as per TS with standard sagging in each and every
span.
KM 252.0
7
Supply fitting & fixing of L T danger plate on pole as
directed. NO 1320
Annexure-II
B Package NO:- AP/GEC/02, Name of Works:- (B) Conversion of LT 1 Phases 2 Wires to 3 Phases 4 Wires with Weasel Conductor. ( Line
Length= 100 Ckt.KM)
1
Supply, fitting & fixing of G.I L T angle cross arm (
40x40x5x500) mm with angle back clamp in poles of L T
line, drilling of holes including proper clamps and nuts &
bolts as per TS
NO 2400
2 Supply, fitting & fixing of L T pin insulator with pin on
cross arm as per TS NO 3200
3 Supply, fitting & fixing L T shackle insulator with straps
on L T cross arm with necessary holes as per TS SET 1600
4
Supply and stringing of AAAC Weasel conductor in L T
lines with laying conductor on ground,liftings on poles,
tensioning, binding on insulator with jointing sleeve,
jumpering on pole including supply & fittings of nuts &
bolts as per TS with standard sagging in each and every
span.
KM 210.0
5
Supply fitting & fixing of L T danger plate on pole as
directed. NO 500
21
A Package NO:- AP/GEC/03, Name of Works:- (A) Construction of new 11/0.4 KV, 25 KVA S/S ( 30 Nos) (Annexure-II)
1
Supply & erection of 9.75 M P.S.C. pole perpendicular to ground level including excavation of earth pit having depth 1/6 in the length of pole and a cross section of 0.75 Mtr. X 0.65 Mtr with edge brick soling, bolder packing, including complete with refilling with soil & ramming including boulder Packing as per TS No
60
2
Supply, fitting & fixing of G I Channel cross arm size
100x40x6x2.2 M in 2 pole structure of H T lines, drilling of
holes including proper G I pole clamps and nuts & bolts as
per TS
No 240
3 Supply, fitting & fixing of 11 KV pin insulator polymeric on cross
arm as per TS NO 90
4 Supply, fitting & fixing 70 KN disc insulator polymeric with
hardware fittings on cross arm as per TS Set 180
5
Supply, fitting & fixing of H T stay set complete including digging of
earth pit of area 0.9 m x 0.6m and depth 1.4 M placing in stay rod
with G I stay wire & guy insulator on the pole clamps, fixing
thimble bow with boulder packing & hard ramming to fill up have
the pit and earth packing up to ground level including supply of
boulder,clamps,nuts & bolts as per TS
SET 60
6
Supply & Erection of 11/0.4 KV, 25 KVA 3 Star transformers on
poles including transportation, fitting & fixing of channel cross arm,
jumpering with weasel conductor, supply & connecting of single
core cable in required size in HV & LV side with necessary
Aluminium lug in proper size, holes, nuts & bolts etc, as per TS
No 10
22
7
Erection of 11/0.4 KV, 25 KVA transformers on poles including
transportation, fitting & fixing of channel cross arm, jumpering with
weasel conductor, supply & connecting of single core cable in
required size in HV & LV side with necessary Aluminium lug in
proper size, holes, nuts & bolts etc, as per TS (20 no’s of , 25
KVA transformers are to be erected from augmentation. No
cost of the Transformers is to be paid to the Bidder.)
No 20 NIL NIL
8 Supply fitting & fixing of 11 KV D.O. fuse set,150 A on cross arm
along with clamps, nuts & bolts as per TS SET 30
9 Supply fitting & fixing of 11 KV L.A (9KN) on M.S. channel cross
arm with drilling of holes, if and where necessary as per TS. SET 30
10 Supply, fitting & fixing 11 KV GOAB switches including supply of
necessary clamps, nuts & bolts as per TS Set 30
11 Supply & stringing of AAAC Weasel Conductor with PG
clamp bindings required in Sub-Station. Km 3.0
12
Supply, fitting & fixing C I earth pipe by digging of pit as per
specification making the G I 6swg in turns (coil) and putting the
earth pipe with necessary connection as per TS
NO 180
13 Supply fitting & fixing of H T danger plate on pole as directed NO 150
14
Design, Supply, installation & commissioning of Cubicle for 11/0.4
KV, 25 KVA DTR ( comprising MCCB, 100A, Aluminium Bus-bar
of rated capacity) ( preferably 3 ph. SMC moulded LT distribution
box for DTR), Trivector meter, LT/CT etc.) along with termination
works as per TS and necessary materials for grounting.
No 30
15 Supply & fitting of XLPE cable (Aluminium) single core 95 sqmm
with necessary lugs from DTR to bus. Mt 1200
16 Supply & fitting of XLPE cable (Aluminium) single core 75/50
sqmm with necessary lugs from bus to line. Mt 1800
17
Materials as required for DTR fencing complete with one steel
gate (made of size 1.0 meter x 1. 5meter) at the entrance as per
TS. The rate shall be inclusive of all materials and labour. No 30
23
18
Supply, fitting & fixing of G I Wire 6 swg
kg 900
B Package NO:- AP/GEC/03, Name of Works:- (B) Augmentation of 11/0.4 KV, 16/25 KVA to 11/0.4 KV,63 KVA Sub-Stations with all accessories.
( 25 KVA=20 no’s & 16 KVA=70 no’s) ( Annexure-II)
1 Supply, fitting & fixing of 11 KV polymeric composite pin
insulator with pin on cross arm as per TS NO 540
2 Supply & stringing of AAAC Weasel Conductor with PG
clamp bindings required in Sub-Station. Km
9.0
3
Supply & Erection of 11/0.4 KV, 63 KVA 3 Star transformers on
poles including transportation, fitting & fixing of channel cross
arm, jumpering with weasel conductor, supply & connecting of
single core cable in required size in HV & LV side with
necessary Aluminium lug in proper size, holes, nuts & bolts etc,
as per TS
A) Augmentation of 11/0.4 KV, 16 KVA to 63 KVA No 70
B) Augmentation of 11/0.4 KV, 25 KVA to 63 KVA No 20
4 Supply fitting & fixing of 11 KV D.O. fuse set,150 A on cross arm
along with clamps, nuts & bolts as per TS SET 90
5 Supply fitting & fixing of 11 KV L.A (9KN) on G.I channel X arm
with drilling of holes, if and where necessary as per TS. SET 90
6 Supply, fitting & fixing 11 KV GOAB switches 150 A including
supply of necessary clamps, nuts & bolts as per TS Set 90
7
Design, Supply, installation & commissioning of Cubicle for
11/0.4 KV, 63 KVA DTR ( comprising MCCB, 100A, Aluminium
Bus-bar of rated capacity) ( preferably 3 ph. SMC moulded LT
distribution box for DTR), Trivector meter, LT/CT etc.) Along with
termination works as per TS and necessary materials for
grounting. No 90
24
8
Supply, fitting & fixing C I earth pipe by digging of pit as per
specification making the G I 6swg in turns (coil) and putting the
earth pipe with necessary connection as per TS NO 540
9 Supply fitting & fixing of H T danger plate on pole as directed NO 180
10
Labour Charges for dismantling of existing installations and
dismantled 16 KVA DTRs to be deposited in the Departmental
store
No 90 Nil Nil
11
Materials as required for fencing around transformer complete
with RCC footings with one steel gate on RCC column inclusive
of all materials and labour.
No 90
12 Supply & fitting of XLPE cable (Aluminium) single core 120
sqmm with necessary lugs from DTR to bus. Mt 3600
13 Supply & fitting of XLPE cable (Aluminium) single core 95 sqmm
with necessary lugs from bus to line. Mt 10800
14 Supply, fitting & fixing of G I Wire 6 swg kg
2700
A Package NO:- AP/GEC/04, Name of Works:- (A) Construction of new 11/0.4 KV, 63 KVA S/S ( 30 Nos). ( Annexure-II)
1
Supply & erection of 9.75 M P.S.C. pole perpendicular to ground level including excavation of earth pit having depth 1/6 in the length of pole and a cross section of 0.75 Mtr. X 0.65 Mtr with edge brick soling, bolder packing, including complete with refilling with soil & ramming including boulder Packing as per TS
No 60
2
Supply, fitting & fixing of G I Channel cross arm size
100x40x6x2.2 M in 2 pole structure of H T lines, drilling of
holes including proper G I pole clamps and nuts & bolts
as per TS
No 240
3
Supply, fitting & fixing of 11 KV pin insulator polymeric on cross
arm as per TS NO 90
4 Supply, fitting & fixing 70 KN disc insulator polymeric with
hardware fittings on cross arm as per TS Set 180
25
5
Supply, fitting & fixing of H T stay set complete including digging
of earth pit of area 0.9 m x 0.6m and depth 1.4 M placing in stay
rod with G I stay wire & guy insulator on the pole clamps, fixing
thimble bow with boulder packing & hard ramming to fill up have
the pit and earth packing up to ground level including supply of
boulder,clamps,nuts & bolts as per TS
SET 60
6
Supply & Erection of 11/0.4 KV, 63 KVA 3 Star transformers on
poles including transportation, fitting & fixing of channel cross
arm, jumpering with weasel conductor, supply & connecting of
single core cable in required size in HV & LV side with
necessary Aluminium lug in proper size, holes, nuts & bolts etc,
as per TS.
No 19
7
Erection of 11/0.4 KV, 63 KVA transformers on poles including
transportation, fitting & fixing of channel cross arm, jumpering
with weasel conductor, supply & connecting of single core cable
in required size in HV & LV side with necessary Aluminium lug in
proper size, holes, nuts & bolts etc, as per TS (11 no’s of, 63
KVA transformers are to be erected from augmentation. No
cost of the Transformers is to be paid to the Bidder.)
No 11 Nil Nil
8 Supply fitting & fixing of 11 KV D.O. fuse set,150 A on cross arm
along with clamps, nuts & bolts as per TS SET 30
9
Supply fitting & fixing of 11 KV L.A (9KN) on G.I channel cross
arm with drilling of holes, if and where necessary as per TS. SET 30
10
Supply, fitting & fixing 11 KV GOAB switches including supply of
necessary clamps, nuts & bolts as per TS Set 30
11 Supply & stringing of AAAC Weasel Conductor with PG
clamp bindings required in Sub-Station. Km
3.0
12
Supply, fitting & fixing C I earth pipe by digging of pit as per
specification making the G I 6swg in turns (coil) and putting the
earth pipe with necessary connection as per TS
NO 180
13 Supply fitting & fixing of H T danger plate on pole as directed NO 150
14 Design, Supply, installation & commissioning of Cubicle for
11/0.4 KV, 63 KVA DTR (comprising MCCB, 100A, Aluminium No 30
26
Bus-bar of rated capacity) (preferably 3 ph. SMC moulded LT
distribution box for DTR), Trivector meter, LT/CT etc.) along with
termination works as per TS and necessary materials for
grounting.
15 Supply & fitting of XLPE cable (Aluminium) single core 120
sqmm with necessary lugs from DTR to bus. Mt 1200
16 Supply & fitting of XLPE cable (Aluminium) single core 95 sqmm
with necessary lugs from bus to line. Mt 3600
17
Materials as required for DTR fencing complete with one steel
gate (made of size 1.0 meter x 1. 5meter) at the entrance as per
TS. The rate shall be inclusive of all materials and labour.
No 30
18 Supply, fitting & fixing of G I Wire 6 swg kg
900
B Package NO:- AP/GEC/04, Name of Works:- (B) Augmentation of 11/0.4 KV, 63 KVA S/S to 11/0.4 KV, 100 KVA S/S ( 11 Nos). ( Annexure-II)
1 Supply, fitting & fixing of 11 KV polymeric composite pin
insulator with pin on cross arm as per TS NO 66
2 Supply & stringing of AAAC Weasel Conductor with PG
clamp bindings required in Sub-Station. Km
1.1
3
Supply & Erection of 11/0.4 KV, 100 KVA 3 Star transformers
on poles including transportation, fitting & fixing of channel cross
arm, jumpering with weasel conductor, supply & connecting of
single core cable in required size in HV & LV side with
necessary Aluminium lug in proper size, holes, nuts & bolts etc,
as per TS
A) Augmentation of 11/0.4 KV, 63 KVA to 100 KVA
No 10
4
Erection of 11/0.4 KV, 100 KVA transformers on poles including
transportation, fitting & fixing of channel cross arm, jumpering
with weasel conductor, supply & connecting of single core cable
in required size in HV & LV side with necessary Aluminium lug in
proper size, holes, nuts & bolts etc, as per TS (1 no’s of, 100
KVA transformers are to be erected from augmentation. No
No 1 Nil Nil
27
cost of the Transformers is to be paid to the Bidder.)
5 Supply fitting & fixing of 11 KV D.O. fuse set,150 A on cross arm
along with clamps, nuts & bolts as per TS SET 11
6 Supply fitting & fixing of 11 KV L.A (9KN) on G.I channel X arm
with drilling of holes, if and where necessary as per TS. SET 11
7 Supply, fitting & fixing 11 KV GOAB switches including supply of
necessary clamps, nuts & bolts as per TS Set 11
8
Design, Supply, installation & commissioning of Cubicle for
11/0.4 KV, 100 KVA DTR ( comprising MCCB, 200A, Aluminium
Bus-bar of rated capacity) ( preferably 3 ph. SMC moulded LT
distribution box for DTR), Trivector meter, LT/CT etc.) along with
termination works as per TS and necessary materials for
grounting. No
11
9
Supply, fitting & fixing C I earth pipe by digging of pit as per
specification making the G I 6swg in turns (coil) and putting the
earth pipe with necessary connection as per TS NO
66
10 Supply fitting & fixing of H T danger plate on pole as directed NO 22
11 Labour Charges for dismantling of existing installations No 11 Nil Nil
12
Materials as required for fencing around transformer complete
with RCC footings with one steel gate on RCC column inclusive
of all materials and labour.
No 11
13 Supply & fitting of XLPE cable (Aluminium) single core 150
sqmm with necessary lugs from DTR to bus. Mt 440
14
Supply & fitting of XLPE cable (Aluminium) single core 120
sqmm with necessary lugs from bus to line.
Mt 1100
28
15 Supply, fitting & fixing of G I Wire 6 swg kg
330
C Package NO:- AP/GEC/04, Name of Works:- (C) Augmentation of 11/0.4 KV, 100 KVA S/S to 11/0.4 KV, 250 KVA S/S ( 1 No). ( Annexure-II)
1
Construction of transformer pad with necessary steel structure
for 100 KVA/ 250 KVA 11/.4 KV S/S DTR including supply of
all foundation materials & Labour No 1
2 Supply, fitting & fixing of 11 KV polymeric composite pin
insulator with pin on cross arm as per TS NO 6
3 Supply & stringing of AAAC Weasel Conductor with PG
clamp bindings required in Sub-Station. Km
0.1
4
Supply & Erection of 11/0.4 KV, 250 KVA 3 Star transformers on
poles including transportation, fitting & fixing of channel cross
arm, jumpering with weasel conductor, supply & connecting of
single core cable in required size in HV & LV side with
necessary Aluminium lug in proper size, holes, nuts & bolts etc,
as per TS
A) Augmentation of 11/0.4 KV, 100 KVA to 250 KVA
No 1
5 Supply fitting & fixing of 11 KV D.O. fuse set,150 A on cross arm
along with clamps, nuts & bolts as per TS SET 1
6 Supply fitting & fixing of 11 KV L.A (9KN) on G.I channel X arm
with drilling of holes, if and where necessary as per TS. SET 1
7 Supply, fitting & fixing 11 KV GOAB switches including supply of
necessary clamps, nuts & bolts as per TS Set 1
8
Design, Supply, installation & commissioning of Cubicle for
11/0.4 KV, 250 KVA DTR ( comprising MCCB, 400A, Aluminium
Bus-bar of rated capacity) ( preferably 3 ph. SMC moulded LT
distribution box for DTR), Trivector meter, LT/CT etc.) along with
termination works as per TS and necessary materials for
grounting. No
1
9 Supply, fitting & fixing C I earth pipe by digging of pit as per
specification making the G I 6swg in turns (coil) and putting the NO 6
29
earth pipe with necessary connection as per TS
10 Supply fitting & fixing of H T danger plate on pole as directed NO 2
11 Labour Charges for dismantling of existing installations No 1
12
Materials as required for fencing around transformer complete
with RCC footings with one steel gate on RCC column inclusive
of all materials and labour.
No 1
13 Supply & fitting of XLPE cable (Aluminium) single core 240
sqmm with necessary lugs from DTR to bus. Mt 40
14 Supply & fitting of XLPE cable (Aluminium) single core 185
sqmm with necessary lugs from bus to line. Mt 100
15 Supply, fitting & fixing of G I Wire 6 swg kg
30
D Package NO:- AP/GEC/04, Name of Works:- (D) Installation of Fencing around 11/0.4 KVA Transformer ( 25 Nos). ( Annexure-II)
1
Materials as required for fencing around transformer complete
with RCC footings with one steel gate on RCC column inclusive
of all materials and labour.
No 25
E Package NO:- AP/GEC/04, Name of Works:- (E) Construction of Transformer Pad ( 20 Nos) ( Annexure-II)
1
Construction of transformer pad with necessary steel structure
for 11/.4 KV S/S DTR including supply of all foundation materials
& Labour as per APDCL norms.
No 20
Grand total is to be written in word Signature of the authorized signatory of firm/individual with seal
( Full Name of the signatory)