+ All Categories
Home > Documents > ASSEMBLY INSTRUCTIONS (DJ) MODEL NO. 374-069 · 2014-10-30 · bed should be placed against the...

ASSEMBLY INSTRUCTIONS (DJ) MODEL NO. 374-069 · 2014-10-30 · bed should be placed against the...

Date post: 07-Jul-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
13
Made in China MODEL NO. 374-069 ASSEMBLY INSTRUCTIONS (DJ) Tools Required for assembly: Allen Wrenchs,Wrench (included). Thank you for purchasing this Powell product. We want to make sure it is complete and to your satisfaction. Please check all packing material carefully for small parts which may have come loose inside the carton during shipment. Hardware can be identified by bright red packaging, Separate, identify, and count all parts and hardware to make sure they match with the illustrations herein and are all present. If any part(s) are missing or defective please contact Powell Customer Service. Contact information is given at the bottom of these instructions. If you feel the item is defective beyond a resolution with part replacements, please return this product with your receipt to the place of purchase. If purchased from an internet retailer, please contact their customer service department. Photo’s and additional information may be requested to validate the claim. Product is not to be returned to the Powell Company under any circumstance unless authorized by the Powell Company or an authorized dealer or representative. Thank you. ATTENTION: SOME LETTERED PARTS LISTED ON THE INSTRUCTION SHEET MAY NOT BE IN PARTS BAG AS THEY MAY ALREADY BE ASSEMBLED. CAREFULLY CHECK PARTS AND PACKING MATERIALS PRIOR TO ORDERING REPLACEMENTS. This bed is designed to use only a mattress which is 74” - 75” long and 37-1/2” - 38-1/2” wide. ensure thickness of mattress does not exceed 8” and mattress is at least 5” below upper edge of guardrail. Replacement parts, including additional guardrails, may be obtained from Powell Company.
Transcript
Page 1: ASSEMBLY INSTRUCTIONS (DJ) MODEL NO. 374-069 · 2014-10-30 · bed should be placed against the wall to prevent entrapment between the bed and the wall. . Prohibit horseplay on or

Made in China

MODEL NO. 374-069ASSEMBLY INSTRUCTIONS (DJ)

Tools Required for assembly: Allen Wrenchs,Wrench (included).

Thank you for purchasing this Powell product. We want to make sure it is complete and to your satisfaction. Please checkall packing material carefully for small parts which may have come loose inside the carton during shipment. Hardwarecan be identified by bright red packaging, Separate, identify, and count all parts and hardware to make sure they matchwith the illustrations herein and are all present. If any part(s) are missing or defective please contact Powell CustomerService. Contact information is given at the bottom of these instructions. If you feel the item is defective beyond aresolution with part replacements, please return this product with your receipt to the place of purchase. If purchased froman internet retailer, please contact their customer service department. Photo’s and additional information may berequested to validate the claim. Product is not to be returned to the Powell Company under any circumstance unlessauthorized by the Powell Company or an authorized dealer or representative. Thank you.

ATTENTION: SOME LETTERED PARTS LISTED ON THE INSTRUCTION SHEET MAY NOT BE IN PARTS BAG AS THEYMAY ALREADY BE ASSEMBLED. CAREFULLY CHECK PARTS AND PACKING MATERIALS PRIOR TO ORDERINGREPLACEMENTS.

This bed is designed to use only a mattress which is74” - 75” long and 37-1/2” - 38-1/2” wide.ensure thickness of mattress does not exceed 8” andmattress is at least 5” below upper edge of guardrail.

Replacement parts, including additional guardrails, may be obtained from Powell Company.

Page 2: ASSEMBLY INSTRUCTIONS (DJ) MODEL NO. 374-069 · 2014-10-30 · bed should be placed against the wall to prevent entrapment between the bed and the wall. . Prohibit horseplay on or

PPPPPARTARTARTARTARTSSSSS(A) LEFT SIDE PANEL(B) RIGHT SIDE PANEL(C) BED FRAME(D) FRONT GUARDRAIL(E) REAR GUARDRAIL(F) LADDER(G) BED SKIRT(H) BED TENT(I) CROSS BAR OF TENT (5)(J) BENDED CROSS BAR OF TENT (2)(K) TOWER(L) U-SHAPE BAR (2)

BC

AD

E

F

G

H

(M) CROSS BAR OF TOWER (2)(N) V-SHAPE BAR TOP(O) SUPPORT(P) FLAG(Q) SLIDE(R) GUARDRAIL OF SLIDE(S) LEFT CROSS BRACE OF SLIDE(T) RIGHT CROSS BRACE OF SLIDE(U) SHORT CROSS BRACE OF SLIDE (4)(V) V-SHAPE BAR BOTTOM

I

J J

KLL

MM

NO

P

QR

R

T

S

U

V

Page 3: ASSEMBLY INSTRUCTIONS (DJ) MODEL NO. 374-069 · 2014-10-30 · bed should be placed against the wall to prevent entrapment between the bed and the wall. . Prohibit horseplay on or

HARDHARDHARDHARDHARDWWWWWAREAREAREAREARE

H1 H2 H3 H4 H5 H6 H1 H2 H3 H4 H5 H6 H1 H2 H3 H4 H5 H6 H1 H2 H3 H4 H5 H6 H1 H2 H3 H4 H5 H6 (4 PCS) (2 PCS) (3 PCS) (8 PCS) (4 PCS) (16 PCS)

H7 H8 H9 H1 H7 H8 H9 H1 H7 H8 H9 H1 H7 H8 H9 H1 H7 H8 H9 H10 H10 H10 H10 H10 H11 H11 H11 H11 H11 H122222 (9 PCS) (10 PCS) (30 PCS) (6 PCS) (4 PCS) (2 PCS)

5/16 X 5/8

H1 H1 H1 H1 H13 H13 H13 H13 H13 H14 H14 H14 H14 H14 H155555 (1 PC) (1 PC) (1 PC)

5/16 X 1-1/4

1/4 X 2-1/2

1/4 X 2-1/4

1/4 X 1-1/2

1/4 X 1-1/4

1/4 X 1-1/4

1/4 X 5/8

Page 4: ASSEMBLY INSTRUCTIONS (DJ) MODEL NO. 374-069 · 2014-10-30 · bed should be placed against the wall to prevent entrapment between the bed and the wall. . Prohibit horseplay on or

STEP 1

C

B

STEP 2

A

C CH1

A/B

A/BH10

H14

Page 5: ASSEMBLY INSTRUCTIONS (DJ) MODEL NO. 374-069 · 2014-10-30 · bed should be placed against the wall to prevent entrapment between the bed and the wall. . Prohibit horseplay on or

STEP 3 STEP 4

H9

A

E

H15

H7

EA/B

B

C

E

C

H9

H15

H3

Page 6: ASSEMBLY INSTRUCTIONS (DJ) MODEL NO. 374-069 · 2014-10-30 · bed should be placed against the wall to prevent entrapment between the bed and the wall. . Prohibit horseplay on or

STEP 5

STEP 6

J

I

D

IJ

STEP 7J

A

B

I

C

I

H9

H15

H4

H8H15

D

C

D

C

Page 7: ASSEMBLY INSTRUCTIONS (DJ) MODEL NO. 374-069 · 2014-10-30 · bed should be placed against the wall to prevent entrapment between the bed and the wall. . Prohibit horseplay on or

STEP 8

STEP 9

J

D

C

C

J

J

STEP 10

H9

H15

H5

H15H6

H2

H14

H10

J

F

D

F

E

E

Page 8: ASSEMBLY INSTRUCTIONS (DJ) MODEL NO. 374-069 · 2014-10-30 · bed should be placed against the wall to prevent entrapment between the bed and the wall. . Prohibit horseplay on or

STEP 11

STEP 12

U

R

T

R

R

STEP 14

Q

Q

Q

U

S

Q

H9

H15

H7

H9

H15

H4

H9

H15H5

U

R

Q

S/T

STEP 13

U

QR

H5

H6

H4

H15

H9

H6

H6

H4

Page 9: ASSEMBLY INSTRUCTIONS (DJ) MODEL NO. 374-069 · 2014-10-30 · bed should be placed against the wall to prevent entrapment between the bed and the wall. . Prohibit horseplay on or

STEP 15

STEP 16

STEP 17

L

L

L

L

Q

Q

H9

H15H4

H11

H15H6

CQC S/T

H9

H13H12

Page 10: ASSEMBLY INSTRUCTIONS (DJ) MODEL NO. 374-069 · 2014-10-30 · bed should be placed against the wall to prevent entrapment between the bed and the wall. . Prohibit horseplay on or

STEP 18

STEP 19

N

N

O

L

V

L

NH9

H15H7

L

O

V

N/V

V

Page 11: ASSEMBLY INSTRUCTIONS (DJ) MODEL NO. 374-069 · 2014-10-30 · bed should be placed against the wall to prevent entrapment between the bed and the wall. . Prohibit horseplay on or

H

STEP 20

K

G

L

M

LM

L

P

H15H6

Page 12: ASSEMBLY INSTRUCTIONS (DJ) MODEL NO. 374-069 · 2014-10-30 · bed should be placed against the wall to prevent entrapment between the bed and the wall. . Prohibit horseplay on or

O

P

G

STEP 22STEP 21

STEP 23 STEP 24

H

HH

C

D/ED/E

A/B/C

FOLLOW THE INFORMATION ON THE WARNING APPEARING ONTHE UPPER BUNK END STRUCTURE AND ON THE CARTON. DONOT REMOVE WARNING LABEL FROM BED.KEEP THESE INSTRUCTION FOR FUTURE REFERENCE.

Page 13: ASSEMBLY INSTRUCTIONS (DJ) MODEL NO. 374-069 · 2014-10-30 · bed should be placed against the wall to prevent entrapment between the bed and the wall. . Prohibit horseplay on or

MODEL NO. 374-069

Name

Address

City

Reason for replacement

Place of purchase

Part Letter Quantity

Should there be any missing or defective part(s), place your partorder on line at www.powellcompany.com, or fax this form to(310)841-0842, or call Customer Service at (800) 622-4456,PLEASE HAVE THE MODEL NUMBER, PART CODE AND FACTORY CODE INDENTIFIED

State Zip(No Post Office Box Addresses)

Best contact phone number( _____ )

Made in ChinaDate of purchase

© 2008 PowellFactory Code (DJ)

WARNING TO HELP PREVENT SERIOUS OR FATAL INJURIES FROM ENTRAPMENT OR FALLS:

Never allow a child under 6 years old on the upper bunk.Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.Use only a mattress which is 74"- 75" long and 37-1/2" - 38-1/2" wide on theupper bunk.Ensure thickness of mattress does not exceed 8" and surface of mattress is at least 5" belowupper edge of guardrails.Always use guardrails on both long sides of the upper bunk.If bunk bed will be placed next to a wall, the guardrail that runs the full length of thebed should be placed against the wall to prevent entrapment between the bed and thewall.

.Prohibit horseplay on or under bed(s) and prohibit jumping on the bed.Prohibit more than one person on upper bunk.Use ladder for entering and leaving upper bunk. Maximum total weight is not to exceed 300 lbs. on the upper bunk.Periodically check and ensure that the guardrail, ladder, and other components are in the their proper position, free from damage, and that all connectors are tight.Do not use substitute parts. Replacement parts, including additional guardrails, may be obtained from our customer service department.Use of water or sleep flotation mattresses is prohibited.Use of a night light may provide added safety precaution for a child using the upper bunk.

STRANGULATION HAZARD Never attach or hang items to any part of the bunk bed thatare not designed for use with the bed; for example, but not limited to, hooks, belts and jumpropes.

DO NOT REMOVE THIS LABEL

Rev. 8/13/08


Recommended