7
PAGE 1 OF 7 PRODUCT INFO The Original Storage and Organization Store ® Assembly Instructions Nantucket Stacking Storage
PAGE 1 OF 7PRODUCT INFO
The Original Storage and Organization Store®
Assembly InstructionsNantucket Stacking Storage
PAGE 2 OF 7PAGE 2 OF 7
ABCDEFG
1111111
Top PanelRight Side PanelLeft Side PanelPartitionBack PanelBottom PanelFront Panel
PARTS LIST
Please review the hardware listed on the next page as well as individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 3 OF 7HARDWARE & TOOLS
H1 x 16WOODEN
DOWEL
H6 x 4PAN HEAD
SCREW
H11 x 1TRUSS HEAD
SCREW
H2 x 14 BOLT
H3 x 14WASHER
H4 x 14LOCK
WASHER
H5 x 2MENDING
PLATE
H10 x 1WALL
SCREW
H7 x 1ALLEN
WRENCH
H12 x 1WALLSTRAP
H8 x 2FLAT HEAD
SCREW
H9 x 1WALL
ANCHOR
TOOLS REQUIRED: PHILLIPS SCREWDRIVER | HAMMER
PAGE 4 OF 7
STEP 1 STEP 2
ASSEMBLY
H1 x 2WOODEN
DOWEL
H8 x 2FLAT HEAD
SCREW
H1 x 8WOODEN
DOWEL
H2 x 8BOLT
H4 x 8LOCK
WASHER
H3 x 8 WASHER
H7 x 1 ALLEN
WRENCH
PAGE 5 OF 7
STEP 3 STEP 4
ASSEMBLY
H1 x 6WOODEN
DOWEL
H2 x 6BOLT
H4 x 6LOCK
WASHER
H3 x 6 WASHER
H7 x 1 ALLEN
WRENCH
PAGE 6 OF 7
STEP 5 STEP 6
ASSEMBLY
H9 x 1WALL
ANCHOR
H10 x 1WALL
SCREW
H11 x 1 TRUSS HEAD
SCREW
H12 x 1 WALL STRAP
Position against wallMark position of strap hole on wallDrill 1/4’’ holetap in wall anchor
Fasten anti-tip strap with wall screw provided
H9
H12
H11
H10
H5 x 2MENDING
PLATE
H6 x 4PAN HEAD
SCREW
Use provided mending plates to fix multiple units together.
PAGE 7 OF 7CARE INSTRUCTIONSThe Original Storage and Organization Store®
WARNING: Do not exceed the recommended weight limits on the designated panels. Exceeding these limits could cause sagging, possibly resulting in failure of product or bodily injury. Severe injury may occur if furniture tips over. Never allow children to climb or play on this product. Place heaviest items on lower shelves and as far back as possible, never overload product.
45 lbs
20 lbs
20 lbs
