DASMA ASSOCIATE MEMBER RESOURCE DIRECTORY Akzo Nobel Coatings Arrow Tru-Line, Inc. Becker Industrial Coatings The Bradbury Co., Inc. Brightsmith Canimex, Inc. Clear Vision Tempered Glass Coilplus, Inc. Continental Coatings The Dow Chemical Company Elton Manufacturing, Ltd. Fehr Bros. Industries, Inc. FlexiForce Foam Supplies, Inc. Huntsman Corporation Industrial Spring Company Interstate Steel Company Iowa Spring Mfg. Inc. LP Building Products National Door Industries, Inc. NCI Building Systems/Metal Coaters New Process Steel Corp. Nucor Steel PPG Industries Precoat Metals Quanex Building Products Randall Metals Corporation Reed City Tool Re-Source Industries, Inc. Royal Building Products Ryerson Service Spring Sherwin Williams Steel Dynamics, Inc. Titan Coatings Torsion Source
Transcript
DASMA ASSOCIATE MEMBER RESOURCE DIRECTORY
Akzo Nobel Coatings Arrow Tru-Line, Inc.
Becker Industrial Coatings The Bradbury Co., Inc.
Brightsmith Canimex, Inc.
Clear Vision Tempered Glass Coilplus, Inc.
Continental Coatings The Dow Chemical Company
Elton Manufacturing, Ltd. Fehr Bros. Industries, Inc.
FlexiForce Foam Supplies, Inc.
Huntsman Corporation Industrial Spring Company Interstate Steel Company
Iowa Spring Mfg. Inc. LP Building Products
National Door Industries, Inc. NCI Building Systems/Metal Coaters
New Process Steel Corp. Nucor Steel
PPG Industries Precoat Metals
Quanex Building Products Randall Metals Corporation
Reed City Tool Re-Source Industries, Inc. Royal Building Products
Ryerson Service Spring
Sherwin Williams Steel Dynamics, Inc.
Titan Coatings Torsion Source
AKZO NOBEL COATINGS INC. Akzo Nobel Coatings Inc. provides high quality coatings for the garage door market. Akzo Nobel produces polyester, siliconized polyester, Kynar PVDF, epoxy, and Plastisol coatings for a variety of markets including garage and entry door, HVAC, automotive, and appliance goods. The North American market is served through four strategic locations: Columbus, OH; Birmingham, AL, St. Jerome, Quebec; and Garcia, Mexico. As the largest paint company in the world, Akzo Nobel has access to worldwide technology for a multitude of applications.
Company Name: Akzo Nobel Coatings Inc.
(Principal Office)
Address: PO Box 489 [43216]
1313 Windsor Avenue
City - State - Zip: Columbus, OH 43211-2898
Website Address: www.akzonobel-ccna.com
Phone: 614-294-3361 / 800-274-3361
Fax: 614-421-4367
Contact: Dan Knight Phn: 317-509-8558
Title: Central Region Sales Manager Fax: 614-421-4367
Established in 1970, Arrow Tru-Line offers a complete line of high quality components for residential, commercial and industrial door applications. Arrow Tru-Line is based in Archbold, OH with multiple distribution points across the USA and Canada. In total, ATL operates from over 600,000sq ft of manufacturing space specializing in roll-formed and stamped metal products, with light assembly capabilities. With an ATL office staffed in the pacific-rim, importing capabilities compliment the complete line.
Including track, struts, angle, stiles, hinges, cable drums, spring fittings, cable assemblies, rollers, bearings, brackets, lock components, tube and shaft, decorative hardware, rolling door components, springs, chain hoists, fasteners and more. Basic and proprietary parts, part design and sampling, plus tooling cost optimization. Distribution points across USA and Canada.
ATL’s experienced Engineering Department oversees our quality, tech support, and new product development with our customers.
Becker Industrial Coatings manufactures and supplies a full range of primers, backers, topcoats and adhesives for steel and aluminum substrates. End uses include construction, appliance and automotive applications using technologies such as plastisols, polyesters, polyurethanes, fluorocarbons, acrylics and siliconized polyesters.
Canimex Inc. is a dedicated OEM supplier with full engineering support to assist customers on components design, manufacturing and sourcing. Its product line includes: Torque Force aluminum die cast cable drums and spring fittings, bearings, rollers, cable assemblies and pulleys, manual chain hoists and a complete line of locking systems.
Canimex also designs, manufactures and sources proprietary parts for sectional door, rolling door and operator manufacturers. Canimex optimizes the access system manufacturer design through a variety of manufacturing processes: aluminum die cast, zinc die cast, plastic injected parts, steel forgings, castings and steel stampings.
Canimex’s logistic is specialized in import-export from all over the world to anywhere on the globe, with a stocking program to support its customers JIT needs. Canimex is certified ISO 9001: 2000.
Company Name: Canimex Inc.
(Principal Office)
Address: 285 St-Georges
City - State - Zip: Drummondville, Quebec, Canada J2C 4H3
Cleer Vision Tempered Glass (CVTG) is a high volume custom glass fabricator that provides Tempered, Insulated, Silkscreen, and Decorative glass to a wide variety of industries including automotive, commercial, residential and furniture.
Continental Coatings Inc. is an industrial paint manufacturer, specializing in urethane enamels, fire resistant coatings, and high performance coil coatings.
The Dow Chemical Company offers structural adhesives engineered for laminated panel construction and for structural laminated applications [(Mor-Ad™ and Mor-Melt™). Styrofoam™ Brand Panel Core extruded polystyrene foam core insulation and thermal insulation supplied in precisely trimmed and planed sheets for composite panel manufacturing.
Company Name: The Dow Chemical Company – Dow Building Solutions
Fehr, with over 150 years of International Trade experience, is uniquely positioned to provide quality and value from a variety of sources, both foreign and domestic. We supply a full line of garage door hardware to the trade, including stampings, rollers, cable, weatherseal, fasteners, lubricants, and springs. We are also a master distributor for Royal Mouldings.
We welcome inquiries for custom manufacturing and specialize in cable assemblies and small run stampings. Stampings are available with zinc, CED, or powder coated finishes. Custom packaging is available.
Our commitment to service includes substantial inventories in both our East and West Coast warehouses. Orders are typically shipped within 24 hours. Our products are available for order 24-7 from our VeriSign secured business-to-business web portal, which gives customers access to their account information, sales history, order status, and shipment tracking. For more information, call us @ 800-431-3095, or visit us at www.fehr.com/door.
FOAM SUPPLIES, INC. Foam Supplies provides custom polyurethane turnkey solutions for all types of door manufacturers. Our ecofoam™pour-in-place foam insulation provides excellent thermal efficiency with no environmental impact (is not subject to EPA phase outs). For doors insulated with boardstock, our OnePart™ adhesive is an ideal and economical choice. We also offer start-up consultation and complete service and support to assure the success of our customers.
HUNTSMAN CORPORATION A full line supplier of Aralidite® Structural Adhesives consisting of urethane, epoxy and hot melt chemistries to help solve all your bonding needs
Company Name: Huntsman Corporation
(Principal Office)
Address: 10003 Woodloch Forest Drive
City - State - Zip: The Woodlands, TX 77380
Website Address:
Phone:
Fax:
Contact: Phn:
Title: Fax:
Email:
Contact: Phn:
Title: Fax:
Email:
INDUSTRIAL SPRING COMPANY
Industrial Spring is a manufacturer of torsion and extension springs and related hardware, offering superior services and products.
INTERSTATE STEEL, DIV. OF NATIONAL MATERIALS Interstate Steel, founded in 1946, has been in the forefront of metal supply to the Garage Door Industry for over Forty years. We were one of the first Steel Service Centers to be admitted as an associate to the National Coil Coaters Organization and began the idea of “single invoice packages” for our customers for painted steels. We have processing capabilities to meet and or exceed the most exacting requirements for painted and or bare metals. Additionally, our parent company has ownership of companies involved in the manufacturing of aluminum extrusions---galvanizing of heavy gauge materials, and an assortment of other processes. We have the largest service center chain in Mexico- We welcome your inquiries---
Company Name: Interstate Steel, Div. of National Materials
Iowa Spring is a manufacturer of round wire, steel springs (torsion and extension) for the overhead garage door industry. We supply both the manufacturer and distributor one-piece, same day delivery or truckload quantities.
Company Name: Iowa Spring Mfg.
(Principal Office)
Address: 2112 Green Street
PO Box 130
City - State - Zip: Adel, IA 50003
Website Address: www.iowaspring.com
Phone: 515-993-4791
Fax: 515-993-3343
Contact: Tim Bianco Phn: 515-993-4791
Title: V. P. Sales and Marketing Fax: 515-993-3343
LP PurposeBuilt™ overlays are durable, engineered wood components which can be used on garage doors to create a premium look for homeowners. LP PurposeBuilt overlays offer supreme workability and ease of use. Garage door manufacturers and dealers will benefit from these value-add products by delivering an exceptional garage door that homeowners will enjoy for years!
National Door Industries is the leading manufacturer of the Stylecraft® window design trim, injection molded residential and commercial window frames, impact resistant window frames, Bevelite® glass, carriage door hardware, branded and private label spray lube, weatherstripping, both residential and commercial hardware and operator parts. National Door is the largest provider of products to the O.E.M. Manufactures, Distributors, and Installing Dealers serving in the garage door industry for over 40 years.
As one of the largest toll processing coil coating companies in the United States, Metal Coaters has been providing coil coating solutions to various industries for more than 25 years. Company Name: Metal Coaters® Ohio
New Process Steel is a steel flat rolled service center. Cold Rolled, Hot Rolled Pickled & Oiled, Galvanized, Galvalume, Electrogalvanized, Galvanneal, Prepainted steels. Slitting, Blanking, Cut-to-length.
Founded in 1883 as Pittsburgh Plate Glass by Captain John B. Ford and John Pitcairn and in Pittsburgh, Pennsylvania. Today, PPG is a global supplier of paints, coatings, optical products, specialty materials, glass and fiber glass.
Company Name: PPG Industries
(Principal Office)
Address: One PPG Place
City - State - Zip: Pittsburgh, PA 15272
Website Address: www.ppg.com
Phone: 800-648-8160
Fax:
Contact: Phn:
Title: Fax:
Email:
(Additional Locations)
Address: 125 Colfax Street Address:
City - State - Zip: Springdale, PA 15144 City - State - Zip:
At Precoat Metals, we're your coil coating experts. Since Precoat's founding in 1961, we continue to expand our extensive process knowledge while at the same time dedicating ourselves to the highest-quality products and service. With nine coil coating lines to serve you, we can coat more than one million tons of metal each year. We apply protective and decorative coatings to coils of steel and aluminum in a continuous process precisely calibrated to provide consistent, even coating of the substrate. If you’re seeking differentiation, then we can take your product to the next step with our innovative printing or laminating capabilities, which include wood grain designs. In addition, we offer supporting services such as embossing, tension leveling, electro-galvanizing, slitting and cut-to-length. There's no substitute for 50 years of hands-on experience. We continuously improve our lines and coating systems, add value to every project - and we proudly deliver on our promises. Precoat Metals has facilities in Baltimore, MD, Birmingham, AL, Granite City, IL (2); Houston, TX; Jackson, MS; Portage, IN, and St. Louis, MO..
Company Name: Precoat Metals
(Principal Office)
Address: 1310 Papin Street
City - State - Zip: St. Louis, MO 63103
Website Address: www.precoatmetals.com
Phone: 314-436-7010
Fax: 314-436-7050
Contact: Matt Murphy Phn: 708-269-3811
Title: Regional Sales Manager Building Products Fax: 708-429-3090
Re-Source provides component parts and finished products to Manufacturers, Distributors, and Installing Dealers of Garage Doors, Operators, Gates, and related access products.
Product line includes decorative carriage house style door hardware, stamped and roll-formed sectional door hardware, torsion & extension springs, torsion cones, cable drums, shafts, bearings, chain hoists, lock components and lock kits, commercial & residential weatherseal products, SMART VENT™ Flood vents for garage doors, branded and private label spray lubricants, bulk aircraft cable, cable assemblies, cable fittings, hand tools, fasteners, commercial door windows, replacement residential and commercial wood door sections,, MANARAS & ZAP Commercial Operators, commercial operator controls, residential and commercial radio controls, operator parts and accessories
Custom distribution programs for OEM Distribution Centers.
Custom component product development.
Shipments via LTL motor freight, UPS, and similar carriers.
Sales office and warehouse located in Fort Worth, Texas.
Company Name: Re-Source Industries, Inc.
(Principal Office)
Address: 520 North Beach Street
City - State - Zip: Ft. Worth, TX 76111
Website Address: www.re-sourceind.com
Phone: 817-222-0060 / 866-316-7337
Fax: 817-222-9950
Contact: Douglas Kidd Phn: 817-222-0060 / 866-316-7337
Reed City Tool, Inc. is a worldwide supplier of residential garage and entry door manufacturing systems. Specialists in manufacturing systems for the garage and entry door industries.
Royal Mouldings, the largest marketer and manufacturer of decorative polymer mouldings and cellular vinyl extrusion components in North America, announces the industry’s best selection of door components and garage system components for energy efficiency, low maintenance and upgrading the area to more family space for the homeowner.
• Garage Solutions™: Thermo Garage Trim Systems – A low maintenance, moisture resistant, termite proof Cellular PVC product group which totally eliminates the problems of wood and metal systems. The program consists of: Thermo Stop®, Door jamb, brick mould and casing-backband. Each piece is carefully designed to work closely together to insure ideal appearance with energy efficiency and low maintenance.
• Garage Solutions™: Overlays™ - Overlays consists of a unique group of products designed to upgrade the exterior of all garage doors to a carriage door appearance with a no rot, low maintenance prefinished and ready-to-stain cellular PVC trim system consisting of 1x2, 1x4, 1x6, 1x8, 1x10 and 1x12 sizes. The Overlays garage components are moisture proof, mold resistant, and add value to the home.
• Garage Solutions: Everdry™ - Everdry wall system includes a specially designed baseboard and wall board that when cleaning keeps the water and residue from seeping behind the moulding and wall. It does not promote mold. The beaded wall board and cap adds beauty and offers protection from moisture.
• Pro Frame® entrance and patio door system is the industry’s only totally no-rot, low maintenance door system with an all cellular vinyl and composite entry frame. Proframe includes one of the industry’s best and largest assortments of exterior and interior trim profiles available and has received NOA number 02-0408.05 Miami-Dade County Florida expiration date April 3, 2008 for these components. Proframe’s unique system is waterproof from the top to the bottom of the frame, with no wood construction used. The system is available painted and ready to stain for steel and fiberglass doors. The original factory applied finish is covered by a 10-year limited warranty for UV degeneration. Proframe is available in lineal or prepackaged kits and also provides the industry’s largest selection of sizes, including 4 9-16”, 5 ¼”, 6 9-16”, and 6 13-16”. The cellular vinyl is combined with a composite post-treated filler core that further strengthens the product.
Company Name: Royal Building Products
(Principal Office)
Address: 135 Bear Creek Road PO Box 610
City - State - Zip: Marion, VA 24354
Website Address: www.royalbuildingproducts.com
Phone: 800-368-3117
Fax: 276-782-3292
Contact: Michael Cole Phn: 276-783-8161 ext. 528 / 800-368-3117
The Valspar Corporation is one of the largest global coatings manufacturers in the world, providing coatings and coating intermediates to a wide variety of customers. Since 1806, Valspar has been dedicated to bringing customers the latest innovations, the finest quality, and the best customer service in the coatings industry.
Steel Dynamics is a world-class steel mini mill, headquartered in Fort Wayne, Indiana. Our flat-rolled division produces 2.5 million tons per year of high quality Hot Rolled, Cold Rolled, Hot Dipped Galvanized and Galvannealed steel. Our innovative post-annealed galvanized steel is being used throughout the industry as a low-cost alternative to expensive DDS and IF steels typically necessary to satisfy the demanding forming requirements that characterize raised panel garage doors. The recent start-up of our ultra light gauge galvanizing line in Jeffersonville, Indiana, further expands our product offering to include material as light as .008” in thickness. We have also recently completed construction of a new continuous coil coating line adjacent to our flat-rolled mill, allowing us to provide low-cost, high-quality prepainted steel to the garage door industry. The coil coating line incorporates tension leveling and in-line continuous color measurement to ensure we can satisfy the quality requirements of even the most demanding garage door applications.
Titan Coatings is an ISO: 9001:2000 certified manufacturer of high quality coatings that focuses on supplying innovative coatings technology for the protection of metal surfaces. We specialize in the coil coating, aluminum extrusion, and transportation markets. Our products are developed and produced in a state of the art laboratory and manufacturing facility by a highly experienced team of chemists, technicians, and skilled individuals. Our customers’ satisfaction is our top priority. We work hard to continuously improve our technology, productivity and service while thriving on the challenge of satisfying each individual customer’s needs and earning their business. Titan Coatings strategically develops solutions to our customers' problems. With our continuous focus on adding value to the customer through proven technology, unprecedented service, competitive pricing, and an appreciation for your business - make Titan your choice in meeting your coating needs!
Torsion Source is focused on new, creative ideas. Our goal is to help differentiate our customers' products from others in the industry. We do this by continually developing new ideas for existing products. If you work with Torsion Source, you are getting a team of industry experts focused on providing value to your organization. Based on our industry knowledge and manufacturing expertise, we can develop a customized solution for your next project.
