ASTM uPVC Schedule 80 - Paling - Homepaling.com.my/PDF_Files/Catalogues/Industrial... · Xirtec®...

ASTM uPVC Schedule 80

27

SPECIFICATION

specification

PRESSURE PIPING SYSTEM

SCHEDULE 80 & IPEX FITTINGS

Schedule 80 Pipes

Temperature Consideration

Standards & Quality

Applications

chemical processing treated and untreated effluent

agricultural cooling water

potable water irrigation

Sch. 80 pipe is resistant to most acids, alkalis, salts, fats, oxidants and halogens. However, Sch. 80 pipe should not be

used with ester, ketones, ethers and aromatic or chlorinated hydrocarbons.

Typical applications include:

Being a thermoplastic material, Sch. 80 pipe will display variations in its physical properties as the temperature

changes. As the temperature falls, the pipe's stiffness and tensile strength increase, thereby increasing the pipe's

pressure capacity. Conversely, as the operating temperature rises, the pipe decreases in stiffness and tensile strength;

consequently, the pressure capacity of the pipe will be reduced. With the drop in temperature, Sch. 80 pipe decreases

in impact strength and becomes less ductile. As the temperature rises, the impact strength and flexibility of the pipe

increase.

Thermal Linear Expansion

Sch. 80 pipe expands and contracts with change in

temperature. The coefficient of thermal expansion is 7 X 10-5

mm/mm/ºC. This is equivalent to 7mm change in length for

every 10 meters for every 10ºC change in temperature.

Pressure De-rating Factor

The pressure ratings given are for operating temperature of

water at 73ºF (23ºC). For operating temperature above 73ºF

(23ºC), the working pressure has to be de-rated by

multiplying the working pressure of the selected pipe at 73ºF

(23ºC), by the appropriate de-rating factor to determine the

maximum permissible working pressure of the pipes at the

elevated temperature chosen. Nevertheless, Sch. 80 pipe

should not be used at temperature in excess of 140ºF

(60ºC).

OPERATING TEMP DE-RATING FACTOR

Fº Cº

73 23 1.00

80 26 0.88

90 32 0.76

100 38 0.64

110 43 0.54

120 49 0.42

130 54 0.32

140 60 0.20

Sch. 80 pipe is manufactured to comply with NSF

Standard 61, CSA B 137.3 and ASTM D1785,

consistently meeting the Quality Assurance test

requirements of the standard with regards to burst

pressure, flattening and extrusion quality.

28product



PIPES

Chemical resistance:

Sch. 80 pipes have excellent chemical resistance which allows the

transportation of many acids, alkalis and chemical concentrates

without fear of corrosion and environmental pollution.

Abrasion resistance:

Sch. 80 pipes offer good resistance to abrasion and erosion from

aggressive slurries, which can rapidly damage steel or other

traditional pipe materials.

Smooth bore:

The exceptionally smooth bore results in low friction head losses and

also inhibits the formation of scale, with consequent savings in pump

energy consumption and reduced pressure drops.

Light weight:

At 5 times lighter than steel pipe, Sch. 80 pipes are much easier to

handle, especially during installation at site.

Easy to join:

Solvent welding gives fast and trouble free installation and allows

simple modifications to existing systems.

PRODUCT NOMINAL PIPE OUTSIDE WALL MAX WORKING

CODE DIAMETER LENGTH DIAMETER THICKNESS PRESS

(in) (mm) L (M) (in) (mm) (in) (mm) (psi) (MPa)

SCH. 80 Pipes Benefits

1100 015 60 80 ½ 15 6.0 0.836 - 0.844 21.2 - 21.4 0.147 - 0.167 3.7 - 4.2 850 5.86

1100 020 60 80 ¾ 20 6.0 1.046 - 1.054 26.6 - 26.8 0.154 - 0.17 3.9 - 4.4 690 4.76

1100 025 60 80 1 25 6.0 1.310 - 1.320 33.3 - 33.5 0.179 - 0.200 4.6 - 5.1 630 4.34

1100 032 60 80 1¼ 32 6.0 1.655 - 1.665 42.0 - 42.3 0.191 - 0.214 4.9 - 5.4 520 3.59

1100 040 60 80 1½ 40 6.0 1.894 - 1.906 48.1 - 48.4 0.200 - 0.224 5.1 - 5.7 470 3.24

1100 050 60 80 2 50 6.0 2.369 - 2.381 60.2 - 60.5 0.218 - 0.244 5.5 - 6.2 400 2.76

1100 065 60 80 2½ 65 6.0 2.868 - 2.882 72.8 - 73.2 0.276 - 0.309 7.0 - 7.8 420 2.90

1100 080 60 80 3 80 6.0 3.492 - 3.508 88.7 - 89.1 0.300 - 0.336 7.6 - 8.5 370 2.55

1100 100 60 80 4 100 6.0 4.491 - 4.509 114.1 - 114.5 0.337 - 0.377 8.6 - 9.6 320 2.21

1100 155 60 80 6 155 6.0 6.614 - 6.636 168.0 - 168.6 0.432 - 0.484 11.0 - 12.3 280 1.93

1100 200 60 80 8 200 6.0 8.610 - 8.640 218.7 - 219.5 0.500 - 0.560 12.7 - 14.2 250 1.72

1100 250 60 80 10 250 6.0 10.735 - 10.765 272.7 - 273.4 0.593 - 0.664 15.1 - 16.9 230 1.59

1100 300 60 80 12 300 6.0 12.735 - 12.765 323.5 - 324.2 0.687 - 0.769 17.5 - 19.5 230 1.59

Pipes Dimensions & Working Pressures

Schedule 80 Pipes (Plain Ended)

29

SPECIFICATION

specification



Manufacturer’s Product Specification:

Schedule 80 Fittings

Scope

This specification sheet covers the manufacturer’s requirements for Xirtec® 140 PVC Schedule 80 pipe fittings as

manufactured by IPEX. These fittings meet or exceed the standards set by the American Society for Testing and Materials

(ASTM) and the National Sanitation Foundation (NSF) International, Standards 14/61.

PVC Materials

Rigid Xirtec® 140 PVC (Polyvinyl Chloride) used in the manufacture of Schedule 80 fittings is of Type I, Grade 1 compound

(cell classification 12454) as stated in ASTM D1784. Raw material used in molding shall contain the specified amounts of

color pigment, stabilizers, and other additives approved by NSF International.

Dimensions

Physical dimensions and tolerances of Xirtec® 140 PVC Schedule 80 IPS fittings as manufactured by IPEX meet the

requirements of ASTM Standard Specification D2467 for socket-type fittings and ASTM D2464 for threaded fittings.

Threaded fittings have Taper Pipe Threads in accordance with ANSI/ASME B1.20.1. Flanged fittings have nominal

dimensions in accordance with ANSI/ASME B16.5.

Marking

Xirtec® 140 PVC Schedule 80 fittings are marked as prescribed in ASTM D2467 and D2464 to indicate the manufacturer’s

name and trademark, material designation,the NSF mark, size of fitting, and ASTM designation D2467 (socket) or D2464

(threaded).

Sample Specification

All Schedule 80 socket fittings shall conform to ASTM D2467. All Schedule 80 threaded fittings shall conform to ASTM

D2464. All 150 Class flanges shall conform to ANSI/ASME B16.5. All pipe, fittings, and valves shall be compatible Xirtec®

140 compound and produced by one manufacturer; as supplied by IPEX.

Notes

All dimensions are in inches unless otherwise specified. Dimensions are subject to change without notice. Contact the

factory for clarifications.

product



FITTINGS

Schedule 80

COUPLINGS

Soc x Soc

Xirtec Critical Dimensions

Nom. Univ. IPEX

Pipe Size Part No. Part No. C D L M

1/4 x 1/4

3/8 x 3/8

1/2 x 1/2

3/4 x 3/4

1 x 1

1-1/4 x 1-1/4

1-1/2 x 1-1/2

2 x 2

2-1/2 x 2-1/2

3 x 3

4 x 4

6 x 6

8 x 8

COUPLINGS

M

LD

C

C

829002 036088 0.655 0.302 1.375 0.845

829003 036089 0.750 0.423 1.625 1.000

829005 036090 0.900 0.526 1.920 1.240

829007 036091 1.035 0.722 2.170 1.505

829010 036092 1.145 0.936 2.395 1.770

829012 036093 1.280 1.255 2.670 2.140

829015 036094 1.400 1.476 2.915 2.410

829020 036095 1.535 1.913 3.170 2.900

829025 036096 1.780 2.290 3.755 3.570

829030 036097 1.900 2.864 4.025 4.195

829040 036098 2.275 3.786 4.765 5.285

829060 036099 3.020 5.709 6.310 7.645

829080 036100 4.540 7.565 9.625 9.870


Nom. Univ. IPEX

Pipe Size Part No. Part No. C1 C2 D1 D2 L M1 M2

1/2 x 1/4

3/4 x 1/2

1 x 1/2

1 x 3/4

1-1/4 x 3/4

1-1/2 x 1

2 x 1-1/2

REDUCING COUPLINGS

830072

830101

830130

830131

830167

830211

830251

036746

036748

036749

036750

036751

036754

035758

0.875

1.000

1.125

1.125

1.250

1.375

1.500

0.625

0.875

0.985

1.000

1.525

1.125

1.375

0.526

0.722

0.936

0.936

1.255

1.476

1.913

0.302

0.526

0.526

0.722

0.722

0.936

1.476

2.280

2.345

2.740

2.740

3.040

3.155

3.405

1.240

1.505

1.770

1.770

2.140

2.410

2.900

0.845

1.240

1.240

1.505

1.505

1.770

2.410

M1

C1

L

C2

D1

D2

M2

Schedule 80

COUPLINGS

FPT x FPT - reducing

30

Imported fittings from Aliaxis.


FITTINGS

product 31



Schedule 80

COUPLINGS

FPT x FPT


Nom. Univ. IPEX

Pipe Size Part No. Part No. T D L M

¼ x ¼3⁄8 x 3⁄8

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 x 2

2-½ x 2-½

3 x 3

4 x 4

COUPLINGS

830002 036104 0.595 0.302 1.345 0.845

830003 036105 0.595 0.423 1.470 1.000

830005 036106 0.755 0.526 1.605 1.240

830007 036107 0.755 0.722 1.620 1.505

830010 036108 0.940 0.936 2.010 1.770

830012 036109 1.055 1.255 2.210 2.140

830015 036110 1.065 1.476 2.225 2.410

830020 036111 1.200 1.913 2.500 2.900

830025 036112 1.460 2.290 3.125 3.570

830030 036113 1.530 2.864 3.190 4.195

830040 036114 1.585 3.786 3.405 5.285


Nom. Univ. IPEX

Pipe Size Part No. Part No. C1 C2 D1 D2 L M1 M2

3/4 x 1/2

1 x ½

1 x ¾

1-¼ x ¾

1-¼ x 1

1-½ x ½

1-½ x ¾

1-½ x 1

1-½ x 1-¼

2 x ½

2 x 1

2 x 1-½

3 x 2

4 x 2

4 x 3

6 x 4

8 x 6

REDUCING COUPLINGS

829101 036719 1.040 0.885 0.722 0.526 2.080 1.505 1.240

829130 036720 1.165 0.880 0.936 0.526 2.380 1.770 1.240

829131 036721 1.165 1.035 0.936 0.722 2.385 1.770 1.505

829167 036723 1.280 1.000 1.255 0.722 2.590 2.140 1.505

829168 036724 1.280 1.155 1.255 0.936 2.660 2.140 1.770

829209 036725 1.375 0.875 1.476 0.526 2.845 2.140 1.240

829210 036726 1.375 1.000 1.476 0.722 2.845 2.140 1.505

829211 036727 1.410 1.160 1.476 0.936 3.060 2.140 1.770

829212 036728 1.410 1.280 1.476 1.255 3.050 2.140 2.140

829247 036897 1.500 0.885 1.913 0.526 2.480 2.900 1.240

829249 036729 1.545 1.160 1.913 0.936 3.530 2.900 1.770

829251 036731 1.540 1.410 1.913 1.476 3.515 2.900 2.410

829338 036735 1.910 1.535 2.864 1.913 4.200 4.195 2.900

829420 036736 2.290 1.540 3.786 1.913 5.110 5.285 2.900

829422 036738 2.290 1.905 3.786 2.864 5.105 5.285 4.195

829532 036740 3.030 2.290 5.709 3.786 6.740 7.645 5.285

829585 036743 4.040 3.000 7.565 5.709 8.040 9.870 7.645

Schedule 80

COUPLINGS

Soc x Soc - reducing

T

T

D

M

L

M1

L

M2

D1

D2

C1

C2



product 32



FITTINGS


Nom. Univ. IPEX

Pipe Size Part No. Part No. C CM D1 D2 L Q

3⁄8 x ¼

½ x ¼

½ x 3⁄8

¾ x ½

1 x ½

1 x ¾

1-¼ x ½

1-¼ x ¾

1-¼ x 1

1-½ x ½

1-½ x ¾

1-½ x 1

1-½ x 1-¼

2 x ½

2 x ¾

2 x 1

2 x 1-¼

2 x 1-½

2-½ x 1-¼

2 ½ x 1-½

2-½ x 2

3 x 1

3 x 1-¼

3 x 1-½

3 x 2

3 x 2-½

4 x 2

4 x 2-½

4 x 3

6 x 2

6 x 3

6 x 4

8 x 4

8 x 6

REDUCING BUSHINGS

837052 036599 0.750 0.770 0.675 0.302 0.975 0.800

837072 036600 0.875 0.890 0.840 0.302 1.090 0.970

837073 036601 0.875 0.880 0.840 0.423 1.115 1.005

837101 036604 1.000 1.020 1.050 0.526 1.380 1.250

837130 036605 1.125 1.125 1.315 0.526 1.500 1.635

837131 036606 1.125 1.305 1.315 0.722 1.505 1.635

837166 036607 1.250 1.260 1.660 0.526 1.635 2.080

837167 036608 1.250 1.255 1.660 0.722 1.625 2.075

837168 036609 1.250 1.305 1.660 0.936 1.685 2.065

837209 036610 1.375 1.380 1.900 0.526 1.755 2.260

837210 036611 1.375 1.380 1.900 0.722 1.750 2.260

837211 036612 1.375 1.380 1.900 0.936 1.755 2.260

837212 036613 1.295 1.385 1.900 1.255 1.760 2.265

837247 036614 1.500 1.505 2.375 0.526 1.875 2.815

837248 036615 1.500 1.505 2.375 0.722 1.865 2.820

837249 036616 1.500 1.520 2.375 0.936 1.875 2.825

837250 036617 1.500 1.520 2.375 1.255 1.895 2.840

837251 036618 1.500 1.445 2.375 1.476 1.885 2.820

837290 036620 1.350 2.000 2.875 1.255 2.300 3.280

837291 036621 1.560 2.000 2.875 1.476 2.300 3.290

837292 036622 1.750 1.885 2.875 1.913 2.120 3.270

837335 036623 1.875 1.900 3.500 0.936 2.265 3.905

837336 036269 1.875 1.870 3.500 1.255 2.265 3.735

837337 036624 1.875 1.870 3.500 1.476 2.250 3.890

837338 036625 1.875 1.870 3.500 1.913 2.250 3.890

837339 036626 1.875 1.885 3.500 2.290 2.260 3.900

837420 036628 2.250 2.280 4.500 1.913 2.660 4.910

837421 036629 2.250 2.270 4.500 2.290 2.655 4.890

837422 036630 2.250 2.270 4.500 2.864 2.665 4.920

837528 036632 3.000 3.470 6.625 1.913 3.990 6.850

837530 036633 3.000 3.100 6.625 2.864 3.720 7.335

837532 036634 3.000 3.105 6.625 3.786 3.720 7.330

837582 136155 4.000 4.055 8.625 3.786 5.120 9.435

837585 036638 4.000 4.085 8.625 5.709 4.465 9.360

Schedule 80

REDUCING BUSHINGS

Spig x Soc

Q

C

D2

D1

CML


product



FITTINGS

33

REDUCING BUSHINGS Xirtec Critical Dimensions

Nom. Univ. IPEX

Pipe Size Part No. Part No. D1 D2 L Q S T

3⁄8 x ¼

½ x ¼

½ x 3⁄8

¾ x ¼

¾ x 3⁄8

¾ x ½

1 x ¼

1 x 3⁄8

1 x ½

1 x ¾

1-¼ x ½

1-¼ x ¾

1-¼ x 1

1-½ x ½

1-½ x ¾

1-½ x 1

1-½ x 1-¼

2 x ½

2 x ¾

2 x 1

2 x 1-¼

2 x 1-½

2-½ x 2

3 x 1-½

3 x 2

3 x 2-½

4 x 2

4 x 3

Schedule 80

REDUCING BUSHINGS

MPT x FPT

839052 036647 0.423 0.302 0.810 0.805 0.600 0.625

839072 036648 0.526 0.302 0.875 0.875 0.680 0.570

839073 036649 0.526 0.423 0.940 1.000 0.745 0.580

839098 036651 0.722 0.302 1.010 1.185 0.785 0.675

839099 036652 0.722 0.423 1.005 1.200 0.785 0.600

839101 036653 0.722 0.526 0.995 1.380 0.685 0.760

839128 036654 0.936 0.302 1.230 1.500 0.960 0.630

839129 036655 0.936 0.423 1.225 1.500 0.980 0.625

839130 036656 0.936 0.526 1.130 1.685 0.815 0.765

839131 036657 0.936 0.722 1.160 1.690 0.820 0.775

839166 036658 1.255 0.526 1.370 2.070 0.990 0.695

839167 036659 1.255 0.722 1.390 2.075 1.010 0.805

839168 036660 1.255 0.936 1.395 2.070 1.015 1.020

839209 036661 1.476 0.526 1.215 2.100 0.900 0.835

839210 036662 1.476 0.722 1.375 2.315 0.985 0.805

839211 036663 1.476 0.936 1.380 2.315 0.990 0.995

839212 036664 1.476 1.255 1.380 2.315 1.010 1.015

839247 036665 1.913 0.526 1.405 2.820 1.035 0.690

839248 036666 1.913 0.722 1.385 2.760 1.005 0.810

839249 036667 1.913 0.936 1.385 2.770 0.995 0.995

839250 036668 1.913 1.255 1.410 2.815 1.035 0.860

839251 036669 1.913 1.476 1.380 2.760 1.010 1.010

839292 036672 2.290 1.913 1.970 3.125 1.555 1.065

839337 036673 2.864 1.476 1.995 3.740 1.625 1.040

839338 036674 2.864 1.913 2.030 3.755 1.625 1.065

839339 036675 2.864 2.290 2.020 3.740 1.630 1.560

839420 036676 3.786 1.913 1.940 4.730 1.550 1.000

839422 036677 3.786 2.864 2.125 4.755 1.730 1.625

Imported fi ttings from Aliaxis.

product



FITTINGS

34


Nom. Univ. IPEX

Pipe Size Part No. Part No. CM D1 D2 L Q T

3⁄8 x ¼

½ x ¼

½ x 3⁄8

¾ x ¼

¾ x ½

1 x 3⁄8

1 x ½

1 x ¾

1-¼ x ½

1-¼ x ¾

1-¼ x 1

1-½ x ½

1-½ x ¾

1-½ x 1

1-½ x 1-¼

2 x ½

2 x ¾

2 x 1

2 x 1-¼

2 x 1-½

2-½ x ½

2-½ x ¾

2-½ x 1

2-½ x 1-¼

2-½ x 1-½

2-½ x 2

3 x ¾

Schedule 80

REDUCING BUSHINGS

Spig x FPT

838052

838072

838073

838098

838101

838129

838130

838131

838166

838167

838168

838209

838210

838211

838212

838247

838248

838249

838250

838251

838287

838288

838289

838290

838291

838292

838334

036679

036681

036682

036683

036684

036685

036686

036687

036688

036689

036690

036691

036692

036693

036694

036695

036696

036697

036698

036699

236002

036700

036701

036702

036703

036704

036705

0.750

0.820

0.810

1.000

1.025

1.160

1.180

1.200

1.305

1.255

1.305

1.375

1.430

1.415

1.375

1.505

1.535

1.540

1.535

1.535

1.990

1.990

1.990

1.990

1.977

1.750

1.880

0.675

0.840

0.840

1.050

1.050

1.315

1.315

1.315

1.660

1.660

1.660

1.900

1.900

1.900

1.900

2.375

2.375

2.375

2.375

2.375

2.875

2.875

2.875

2.875

2.875

2.875

3.500

0.302

0.302

0.423

0.302

0.526

0.423

0.526

0.722

0.526

0.722

0.936

0.526

0.722

0.936

1.255

0.526

0.722

0.936

1.255

1.476

0.526

0.722

0.936

1.255

1.476

1.913

0.722

0.960

1.015

1.010

1.230

1.345

1.410

1.500

1.500

1.680

1.645

1.685

1.755

1.815

1.805

1.776

1.880

1.925

1.915

1.920

1.920

2.380

2.380

2.380

2.380

2.400

1.955

2.270

0.795

0.880

0.890

1.200

1.375

1.500

1.685

1.685

2.065

2.075

2.065

2.260

2.325

2.320

2.260

2.810

2.760

2.755

2.755

2.755

3.110

3.110

3.110

3.110

3.110

3.190

3.740

0.600

0.570

0.595

0.705

0.775

0.590

0.765

0.775

0.805

0.690

0.810

0.685

0.810

1.010

0.900

0.685

0.805

0.995

0.995

0.995

0.760

0.840

1.030

1.045

1.045

1.000

0.720


product



FITTINGS


Nom. Univ. IPEX

Pipe Size Part No. Part No. C M D1 D2 Q T

3 x 1

3 x 1-¼

3 x 1-½

3 x 2

3 x 2-½

4 x 2

4 x 2-½

4 x 3

6 x 2

6 x 3

6 x 4

838335

838336

838337

838338

838339

838420

838421

838422

838528

838530

838532

036706

036707

036708

036709

036710

036711

036712

036713

036714

036715

036716

1.980

1.965

1.995

1.870

1.750

2.280

2.260

2.330

3.485

3.470

3.500

3.500

3.500

3.500

3.500

3.500

4.500

4.500

4.500

6.625

6.625

6.625

0.936

1.255

1.476

1.913

2.290

1.913

2.290

2.864

1.913

2.864

3.786

2.375

2.350

2.390

2.260

2.095

2.655

2.640

2.655

4.000

4.000

4.000

3.740

3.970

3.720

3.720

3.845

4.900

4.730

4.895

6.845

6.870

6.860

1.045

1.040

1.060

1.060

1.440

1.710

1.560

2.050

1.085

1.670

1.760

90º ELBOWS Xirtec Critical Dimensions

Nom. Univ. IPEX

Pipe Size Part No. Part No. C D H M

¼ x ¼3⁄8 x 3⁄8

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 x 2

2-½x 2-½

3 x 3

4 x 4

6 x 6

8 x 8

10 x 10

12 x 12

806002

806003

806005

806007

806010

809012

806015

806020

806025

806030

806040

806060

806080

806100

806120

036179

036180

036181

036182

036183

036184

036185

036186

036187

036188

036189

036191

036192

036864

036865

0.655

0.780

0.890

1.020

1.145

1.270

1.400

1.525

1.775

1.935

2.265

3.025

4.125

5.500

6.500

0.302

0.423

0.524

0.722

0.936

1.255

1.476

1.913

2.290

2.864

3.786

5.709

7.565

9.493

11.294

1.000

1.250

1.445

1.685

1.940

2.160

2.400

2.805

3.300

3.745

4.625

6.650

8.600

11.315

13.385

0.845

1.000

1.215

1.470

1.760

2.145

2.385

2.955

3.580

4.230

5.345

7.615

9.775

10.780

14.200

Schedule 80

REDUCING BUSHINGS

Spig x FPT Cont.

Schedule 80

90º ELBOWS

Soc x Soc


Nom. Univ. IPEX

Pipe Size Part No. Part No. C D G1 G2 M T

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½x 1-½

2 x 2

807005

807007

807010

807012

807015

807020

036172

036173

036174

036175

036176

036177

0.895

1.015

1.155

1.275

1.375

1.530

0.526

0.722

0.936

1.255

1.476

1.913

0.540

0.610

0.785

0.975

1.040

1.375

0.535

0.590

0.785

0.975

1.035

1.470

1.200

1.505

1.760

2.145

2.385

2.955

0.905

1.035

1.150

1.275

1.400

0.970

Schedule 80

90º ELBOWS

Soc x FPT

35




product



FITTINGS


Nom. Univ. IPEX

Pipe Size Part No. Part No. D H M T

¼ x ¼3⁄8 x 3⁄8

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 x 2

2-½ x 2-½

3 x 3

4 x 4

808002

808003

808005

808007

808010

808012

808015

808020

808025

808030

808040

036197

036198

036199

036200

036201

036202

036203

036204

036205

036206

036207

0.302

0.423

0.526

0.722

0.936

1.255

1.476

1.913

2.290

2.864

3.786

0.940

1.000

1.370

1.615

1.810

1.795

2.040

2.370

2.935

3.160

3.735

0.845

1.000

1.215

1.470

1.760

2.145

2.385

2.955

3.580

4.230

5.345

0.625

0.625

0.740

0.825

1.130

0.930

0.930

1.095

1.775

1.420

1.495

Schedule 80

90º ELBOWS

FPT x FPT

Note: T=the inside thread depth (bell depth)


Nom. Univ. IPEX


¼ x ¼3⁄8 x 3⁄8

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 x 2

2-½ x 2-½

3 x 3

4 x 4

6 x 6

8 x 8

10 x 10

12 x 12

817002

817003

817005

817007

817010

817012

817015

817020

817025

817030

817040

817060

817080

817100

817020

036142

036143

036144

036145

036146

036147

036148

036149

036150

036151

036152

036154

036155

036862

036863

0.655

0.750

0.890

1.020

1.150

1.265

1.385

1.505

1.760

1.885

2.260

3.030

4.040

5.500

6.500

0.302

0.423

0.526

0.722

0.936

1.255

1.476

1.913

2.290

2.864

3.786

5.709

7.565

9.493

11.294

0.815

0.970

1.200

1.350

1.475

1.660

1.790

2.000

2.480

2.700

3.095

4.575

6.250

8.065

9.580

0.845

1.000

1.215

1.470

1.760

2.145

2.385

2.955

3.580

4.230

5.345

7.615

9.775

10.780

14.200

Schedule 80

45º ELBOWS

Soc x Soc


Nom. Univ. IPEX

Pipe Size Part No. Part No. D K M T

¼ x ¼3⁄8 x 3⁄8

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 x 2

2-½ x 2-½

3 x 3

4 x 4

819002

819003

819005

819007

819010

819012

819015

819020

819025

819030

819040

036160

036161

036162

036163

036164

036165

036166

036167

036168

036169

036170

0.302

0.423

0.526

0.722

0.936

1.255

1.476

1.913

2.290

2.864

3.786

0.780

0.815

0.995

1.195

1.380

1.620

1.810

2.060

2.665

2.990

3.495

0.845

1.000

1.215

1.470

1.760

2.145

2.385

2.955

3.580

4.230

5.345

0.595

0.815

0.675

0.675

0.845

0.895

0.895

0.915

1.455

1.540

1.600

Schedule 80

45º ELBOWS

FPT x FPT

Note: T=the inside thread depth (bell depth)

36




product



FITTINGS


Nom. Univ. IPEX

Pipe Size Part No. Part No. C D H1 H2 M T

½ x ½ x ½

¾ x ¾ x ¾

1 x 1 x 1

2 x 2 x 2

802005

802007

802010

802020

036828

036829

036830

036832

0.905

1.030

1.150

1.500

0.526

0.722

0.936

1.913

1.375

1.615

1.815

2.405

1.375

1.615

1.815

2.405

1.240

1.415

1.750

2.895

0.905

1.030

1.150

0.970

22.5º ELBOWS Xirtec Critical Dimensions

Nom. Univ. IPEX

Pipe Size Part No. Part No. D H J M

2 x 2

3 x 3

4 x 4

816020

816030

816040

036134

036135

036136

1.913

2.864

3.786

1.875

2.405

2.875

0.440

0.565

0.625

2.955

4.230

5.345

Schedule 80

22.5º ELBOWS

Soc x Soc

TEES Xirtec Critical Dimensions

Nom. Univ. IPEX


¼ x ¼ x ¼3⁄8 x 3⁄8 x 3⁄8

½ x ½ x ½

¾ x ¾ x ¾

1 x 1 x 1

1-¼ x 1-¼ x 1-¼

1-½ x 1-½ x 1-½

2 x 2 x 2

2-½ x 2-½ x 2-½

3 x 3 x 3

4 x 4 x 4

6 x 6 x 6

8 x 8 x 8

10 x 10 x 10

12 x 12 x 12

801002 036768 0.655 0.302 0.970 0.845

801003 036769 0.780 0.423 1.250 0.985

801005 036770 0.895 0.526 1.405 1.240

801007 036771 1.015 0.722 1.595 1.415

801010 036772 1.145 0.936 1.845 1.750

801012 036773 1.270 1.255 2.155 2.350

801015 036774 1.395 1.476 2.410 2.405

801020 036775 1.520 1.913 2.800 2.895

801025 036776 1.775 2.290 3.280 3.570

801030 036777 1.900 2.864 3.720 4.200

801040 036778 2.270 3.786 4.595 5.280

801060 036780 3.030 5.709 6.530 7.575

801080 036781 4.130 7.565 8.625 9.810

801100 036866 5.500 9.493 11.250 12.000

801120 036876 6.500 11.294 13.385 14.200

Schedule 80

TEE

Soc x Soc x Soc

TEES

Schedule 80

TEE

Soc x Soc x FPT

TEES Xirtec Critical Dimensions

Nom. Univ. IPEX

Pipe Size Part No. Part No. D H M T

¼ x ¼ x ¼3⁄8 x 3⁄8 x 3⁄8

½ x ½ x ½

¾ x ¾ x ¾

1 x 1 x 1

1-¼ x 1-¼ x 1-¼

1-½ x 1-½ x 1-½

2 x 2 x 2

2-½ x 2-½ x 2-½

3 x 3 x 3

4 x 4 x 4

805002 036817 0.302 0.970 0.845 0.655

805003 036818 0.423 1.030 0.985 0.625

805005 036819 0.526 1.135 1.240 0.905

805007 036820 0.722 1.605 1.415 1.020

805010 036821 0.936 1.815 1.750 1.170

805012 036822 1.255 1.885 2.350 1.000

805015 036823 1.476 2.055 2.405 0.985

805020 036824 1.913 2.370 2.895 1.040

805025 036825 2.290 2.965 3.570 1.450

805030 036826 2.864 3.180 3.200 1.425

805040 036827 3.786 3.720 5.280 1.515

Schedule 80

TEE

FPT x FPT x FPT

37





product



FITTINGS


Nom. Univ. IPEX

Pipe Size Part No. Part No. C1 C2 C3 D1 D2 D3 H1 H2 H3 M1 M2 M3

801101

801102

-

801126

801130

801131

801157

801167

801168

801210

801211

801247

801248

801249

801251

801338

801339

801420

801422

801530

801532

801585

036786

036787

036790

036791

036788

036789

036792

036793

036794

036795

036796

036797

036798

036799

036800

036802

036803

036804

036805

036807

036808

036810

1.030

1.130

1.300

1.300

1.125

1.315

1.250

1.460

1.280

1.600

1.250

1.405

1.500

1.500

1.530

1.530

1.990

2.260

2.260

2.975

3.025

4.120

1.030

1.130

1.115

1.300

1.125

1.315

1.250

1.460

1.250

1.600

1.250

1.405

1.500

1.500

1.530

1.530

1.530

2.260

2.260

2.975

3.025

4.120

0.890

1.300

1.300

1.130

0.875

1.025

1.000

1.150

0.875

1.150

1.125

1.145

0.875

1.000

1.140

1.380

1.525

1.525

1.910

1.875

2.275

3.060

0.722

0.722

0.936

0.936

0.936

0.936

1.255

1.255

1.255

1.476

1.476

1.913

1.913

1.913

1.913

2.864

2.864

3.786

3.786

5.709

5.709

7.565

0.722

0.722

0.722

0.722

0.936

0.936

0.936

1.255

1.255

1.476

1.476

1.913

1.913

1.913

1.913

2.864

2.864

3.786

3.786

5.709

5.709

7.565

0.526

0.936

0.722

0.936

0.526

0.722

0.722

0.722

0.936

0.722

0.936

0.526

0.722

0.936

1.476

1.913

2.290

1.913

2.864

2.864

3.786

5.709

REDUCING TEES

¾ x ¾ x ½

¾ x ¾ x 1

1 x ¾ x ¾

1 x ¾ x 1

1 x 1 x ½

1 x 1 x ¾

1-¼ x 1 x ¾

1-¼ x 1-¼ x ¾

1-¼ x 1-¼ x 1

1-½ x 1-½ x ¾

1-½ x 1-½ x 1

2 x 2 x ½

2 x 2 x ½

2 x 2 x 1

2 x 2 x 1-½

3 x 3 x 2

3 x 3 x 2-½

4 x 4 x 2

4 x 4 x 3

6 x 6 x 3

6 x 6 x 4

8 x 8 x 6

1.665

1.665

1.880

1.880

1.720

1.930

1.940

2.210

2.155

2.250

2.190

2.305

2.095

2.190

2.400

2.740

3.450

4.460

4.350

5.805

5.825

7.720

1.665

1.665

1.780

1.880

1.720

1.930

1.875

2.210

2.125

2.250

2.125

2.305

2.095

2.190

2.400

2.740

3.450

4.460

4.350

5.805

5.825

7.720

1.465

1.930

1.780

1.780

1.750

1.735

2.065

2.020

2.440

2.210

2.155

2.160

2.315

2.440

2.430

2.660

3.310

4.085

4.220

5.630

5.750

7.625

1.415

1.415

1.750

1.750

1.750

1.750

2.350

2.350

2.350

2.405

2.405

2.895

2.895

2.895

2.895

4.200

4.200

5.280

5.280

7.575

7.575

9.810

1.415

1.415

1.415

1.415

1.750

1.750

1.750

2.350

2.350

2.405

2.405

2.895

2.895

2.895

2.895

4.200

4.200

5.280

5.280

7.575

7.575

9.810

1.240

1.750

1.415

1.750

1.240

1.415

1.415

1.750

1.750

1.415

1.750

1.240

1.415

1.750

2.405

2.895

3.570

2.895

4.200

4.200

5.280

7.575


Schedule 80

TEE

Soc x Soc x Soc - reducing


Nom. Univ. IPEX

Pipe Size Part No. Part No. D G1 G2 G3 H1 H2 H3 M

WYE

1-½ x 1-½ x 1-½

2 x 2 x 2

3 x 3 x 3

4 x 4 x 4

6 x 6 x 6

8 x 8 x 8

875015

875020

875030

875040

875060

875080

036854

036855

036856

036857

036858

036859

1.476

1.913

2.864

3.786

5.709

7.565

0.690

0.845

1.070

1.320

1.875

7.220

2.375

3.030

4.440

5.675

8.305

15.280

2.405

3.030

3.585

4.600

6.745

15.530

2.065

2.345

2.945

3.570

4.875

11.470

3.750

4.530

6.315

7.925

11.300

19.530

3.750

4.530

5.450

6.850

9.740

19.530

2.345

2.875

4.115

5.190

7.510

9.690

Schedule 80

45º WYE

Soc x Soc x Soc

38


product



FITTINGS

Schedule 80

45º WYE

Soc x Soc x Soc - Reducing


Nom. Univ. IPEX

Pipe Size Part No. Part No. D1 D2 D3 G1 G2 G3 H1 H2 L M1 M2 M3

REDUCING WYE

875532 036861 5.709 5.709 3.786 2.560 8.000 7.125 6 x 6 x 4 10.250 10.125 12.690 7.605 7.605 5.400

CROSSES Xirtec Critical Dimensions

Nom. Univ. IPEX

Pipe Size Part No. Part No. D H J M

½ x ½ x ½ x ½

¾ x ¾ x ¾ x ¾

1 x 1 x 1 x 1

1-¼ x 1-¼ x 1-¼ x 1-¼

1-½ x 1-½ x 1-½ x 1-½

2 x 2 x 2 x 2

2-½ x 2-½ x 2-½ x 2-½

3 x 3 x 3 x 3

4 x 4 x 4 x 4

820005

820007

820010

820012

820015

820020

820025

820030

820040

036116

036117

036118

036119

036120

036121

036122

036123

036124

0.526

0.722

0.936

1.255

1.476

1.913

2.290

2.864

3.786

0.565

0.610

0.955

1.095

1.235

1.530

1.750

2.095

2.625

1.470

1.640

2.110

2.375

2.640

3.000

3.440

3.970

4.875

1.510

1.710

2.110

2.440

2.575

3.040

3.350

4.110

5.250

Schedule 80

CROSSES

Soc x Soc X Soc x Soc

39



product



FITTINGS

FLANGES Xirtec Critical Dimensions

Nom. Univ. IPEX

Pipe Size Part No. Part No. BHC BHD BHN C D L M R S

½

¾

1

1-¼

1-½

2

2-½

3

4

5

6

8

851005

851007

851010

851012

851015

851020

851025

851030

851040

851050

851060

851080

036223

036224

036225

036226

036227

036228

036229

036230

036231

036232

036233

036234

2.375

2.750

3.125

3.500

3.875

4.750

5.500

6.000

7.500

8.500

9.560

11.705

0.630

0.630

0.630

0.620

0.625

0.745

0.745

0.700

0.745

8.880

0.965

0.880

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

8.000

8.000

8.000

8.000

0.915

1.015

1.135

1.255

1.385

1.525

1.750

1.920

2.240

3.030

3.120

4.000

Schedule 80

FLANGE

One Piece Soc

0.526

0.722

0.936

1.255

1.476

1.913

2.290

2.864

3.786

4.768

5.709

7.565

1.090

1.225

1.345

1.465

1.585

1.755

1.960

2.125

2.475

3.250

3.500

4.575

3.500

3.880

4.250

4.620

5.000

6.000

7.000

7.500

9.000

10.175

11.000

13.580

0.470

0.525

0.585

0.650

0.730

0.820

0.900

1.070

1.115

1.040

1.350

1.500

0.000

0.050

0.050

0.050

0.050

0.065

0.065

0.080

0.040

0.040

0.040

0.045


Nom. Univ. IPEX

Pipe Size Part No. Part No. BHC BHD BHN D L M R T

½

¾

1

1-¼

1-½

2

2-½

3

4

6

Schedule 80

FLANGE

One Piece FPT

852005

852007

852010

852012

852015

852020

852025

852030

852040

852060

036240

036241

036242

036243

036244

036245

036246

036247

036248

036249

2.375

2.750

3.125

3.500

3.875

4.750

5.500

6.000

7.500

9.500

0.640

0.640

0.640

0.625

0.625

0.750

0.750

0.755

0.755

0.880

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

8.000

8.000

0.526

0.722

0.936

1.254

1.476

1.913

2.290

2.864

3.786

5.709

1.010

1.010

1.175

1.215

1.190

1.250

1.585

1.700

1.800

3.500

3.500

3.880

4.250

4.620

5.000

6.000

7.000

7.500

9.000

11.000

0.470

0.525

0.590

0.655

0.735

0.810

0.900

0.900

1.095

1.270

0.805

0.810

0.975

1.010

0.990

1.035

1.355

1.460

1.560

3.050

Note: BHN = Bolt Hole Numbers


40



product



FITTINGS


Nom. Univ. IPEX

Pipe Size Part No. Part No. BHC BHD BHN C D L M R

1½

2

3

4

6

8

10

12

14

16

Schedule 80

FLANGE

Van Stone Heavy Duty Soc

with Fibre Loc Ring

854015HD

854020HD

854030HD

854040HD

854060HD

854080HD

854100HD

854120HD

854140HD

854160HD

036323

036324

036326

036416

036417

036418

036419

036429

036358

036359

3.870

4.740

6.000

7.500

9.500

11.750

14.250

16.875

18.750

21.250

0.620

0.745

0.700

0.760

0.900

0.895

1.030

0.980

1.085

2.215

4.000

4.000

4.000

8.000

8.000

8.000

12.000

12.000

12.000

16.000

1.410

1.525

1.890

2.295

3.025

4.015

5.250

6.375

6.750

8.000

1.476

1.913

2.864

3.786

5.709

7.565

9.493

11.294

12.412

14.224

1.810

2.010

2.055

2.535

3.200

4.325

5.560

6.710

7.510

8.375

5.000

6.000

7.500

9.000

11.000

13.500

16.000

19.000

21.000

24.000

0.995

1.135

0.895

1.090

1.220

1.500

1.810

1.940

2.750

2.750


Nom. Univ. IPEX


½

¾

1

1-¼

1-½

2

2-½

3

4

5

6

8

10

12

854005

854007

854010

854012

854015

854020

854025

854030

854040

854050

854060

854080

854100

854120

036344

036345

035346

036347

036348

036349

036350

036351

036352

035353

036354

036355

036356

036357

2.380

2.750

3.120

3.500

3.870

4.740

5.500

6.000

7.500

8.500

9.500

11.750

14.250

16.875

0.620

0.620

0.620

0.620

0.620

0.745

0.750

0.700

0.760

0.880

0.900

0.895

1.030

0.980

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

8.000

8.000

8.000

8.000

12.000

12.000

0.870

1.000

1.125

1.250

1.410

1.525

1.760

1.890

2.295

2.650

3.025

4.015

5.250

6.375

0.526

0.722

0.936

1.255

1.476

1.913

2.290

2.864

3.786

4.768

5.709

7.565

9.493

11.294

1.040

1.135

1.260

1.390

1.810

2.010

2.005

2.055

2.535

2.980

3.200

4.325

5.560

6.710

3.505

3.880

4.240

4.610

5.000

6.000

6.965

7.500

9.000

9.100

11.000

13.500

16.000

19.000

0.500

0.560

0.645

0.650

0.993

1.135

0.960

0.895

1.090

1.140

1.220

1.500

1.810

1.940



Schedule 80

FLANGE

Van Stone Soc with

PVC Ring

41



product



FITTINGS


Nom. Univ. IPEX

Pipe Size Part No. Part No. BHC BHD BHN L M R

½

¾

1

1-¼

1-½

2

2-½

3

4

6

8

853005

853007

853010

853012

853015

853020

853025

853030

853040

853060

853080

036250

036251

036252

036253

036254

036255

036256

036257

036258

036259

036260

2.380

2.765

3.125

3.505

3.895

4.765

5.500

6.015

7.515

9.505

11.755

0.630

0.640

0.645

0.630

0.625

0.750

0.740

0.785

0.785

0.915

0.910

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

0.520

0.590

0.635

0.720

0.820

0.885

0.960

0.960

1.150

1.270

1.560

3.500

3.880

4.250

4.620

5.000

6.000

7.000

7.500

9.000

11.000

13.500

0.470

0.525

0.590

0.660

0.745

0.850

0.900

0.905

1.105

1.220

1.500


Nom. Univ. IPEX


½

¾

1

1-¼

1-½

2

2-½

3

4

6

8

10

12

856005

856007

856010

856012

856015

856020

856025

856030

856040

856060

856080

856100

856120

036374

036375

036376

036377

036378

036379

036380

036381

036382

036383

036384

036995

036996

2.330

2.750

3.120

3.500

3.880

4.750

5.500

6.000

7.500

9.500

11.750

14.250

17.000

0.620

0.620

0.620

0.620

0.620

0.750

0.750

0.750

0.750

0.875

0.875

0.875

0.875

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

8.000

8.000

8.000

12.000

12.000

0.990

1.005

1.140

1.355

1.560

1.525

1.790

1.890

2.290

3.010

4.015

5.750

6.315

0.840

1.050

1.315

1.660

1.900

2.375

2.875

3.500

4.500

6.625

8.625

10.750

12.750

1.750

1.900

2.130

2.310

2.605

2.825

3.065

3.120

3.660

4.460

5.250

8.000

8.500

3.505

3.870

4.240

4.600

5.040

5.950

6.965

7.500

9.000

11.000

13.500

16.000

19.00

0.500

0.550

0.635

0.655

0.690

0.820

0.955

0.900

1.110

1.220

1.505

1.625

1.625



Schedule 80

FLANGE

Van Stone Spig

42

Schedule 80

FLANGE

Blind - One Piece



product



FITTINGS


Nom. Univ. IPEX

Pipe Size Part No. Part No. BHC BHD BHN D L M N OD R

½

¾

1

1-¼

1-½

2

2-½

3

4

855005

855007

855010

855012

855015

855020

855025

855030

855040

036385

036386

036387

036388

036389

036390

036391

036392

036393

2.375

2.750

3.125

3.500

3.875

4.750

5.500

6.000

7.500

0.500

0.500

0.500

0.500

0.500

0.625

0.625

0.750

0.750

4.000

4.000

4.000

4.000

4.000

4.000

4.000

4.000

8.000

0.526

0.722

0.936

1.255

1.476

1.913

2.290

2.864

3.786

1.030

1.155

1.250

1.375

1.470

1.565

2.000

2.125

2.065

1.220

1.375

1.750

2.125

2.440

2.970

3.565

4.250

5.250

0.280

0.405

0.315

0.405

0.405

0.500

0.440

0.500

0.375

2.500

3.875

4.250

4.625

5.000

6.000

7.000

7.500

9.000


Schedule 80

FLANGE

Van Stone FPT

0.530

0.565

0.625

0.690

0.750

0.815

1.000

1.065

1.250

UNIONS Xirtec Critical Dimensions

Nom. Univ. IPEX

Pipe Size Part No. Part No. D1 D2 L M N OD T TD TPI

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 x 2

3 x 3

4 x 4

Note: TPI = Threads Per Inch

Schedule 80

UNIONS

Soc x FPT - Viton O-Rings

859005

859007

859010

859012

859015

859020

859030

859040

036410

036411

036412

036413

036414

036415

236010

236011

0.526

0.722

0.936

1.255

1.476

1.913

2.864

3.786

0.840

1.050

1.315

1.660

1.900

2.375

3.500

4.500

2.095

2.375

2.565

2.875

3.125

3.625

5.065

5.875

1.200

1.415

1.755

2.160

2.480

2.945

4.255

5.280

0.470

0.565

0.405

0.625

0.845

1.065

1.500

1.875

1.970

2.500

2.875

3.315

3.565

4.190

5.750

7.065

0.750

0.815

1.065

1.000

0.970

0.970

1.625

1.750

0.840

1.050

1.315

1.660

1.900

2.375

3.500

4.500

14.000

14.000

11.500

11.500

11.500

11.500

8.000

8.000

43



product



FITTINGS


Nom. Univ. IPEX

Pipe Size Part No. Part No. C D L M Q

¼ x ¼3⁄8 x 3⁄8

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 x 2

3 x 3

4 x 4

857002

857003

857005

857007

857010

857012

857015

857020

857030

857040

036833

036834

036835

036836

036837

036838

036839

036840

036842

036843

0.625

0.750

0.895

1.010

1.150

1.270

1.385

1.510

1.890

2.250

0.302

0.423

0.526

0.722

0.936

1.255

1.476

1.913

2.864

3.786

1.925

2.140

2.305

2.590

2.890

3.385

3.840

4.150

4.970

5.920

0.855

1.000

1.200

1.415

1.755

2.160

2.480

2.945

4.255

5.280

Schedule 80

UNIONS

Soc x Soc - Viton O-Rings

1.650

1.785

1.985

2.370

2.680

3.095

3.835

4.805

6.920

7.125


Nom. Univ. IPEX

Pipe Size Part No. Part No. C D L M Q

¼ x ¼3⁄8 x 3⁄8

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 x 2

3 x 3

4 x 4

897002

897003

897005

897007

897010

897012

897015

897020

897030

897040

236004

236005

036956

036964

036980

036981

036982

036983

036984

236006

0.625

0.750

0.890

1.015

1.135

1.270

1.385

1.515

1.880

2.250

0.302

0.423

0.526

0.722

0.936

1.255

1.476

1.913

2.864

3.786

1.940

2.155

2.310

2.570

2.860

3.395

3.820

4.185

4.955

5.875

0.855

1.000

1.200

1.415

1.755

2.160

2.480

2.945

4.255

5.280

Schedule 80

UNIONS

Soc x Soc - EDPM O-Rings

1.655

1.780

1.980

2.345

2.665

3.085

3.805

4.805

4.010

7.065


Nom. Univ. IPEX

Pipe Size Part No. Part No. D L M Q T

¼ x ¼3⁄8 x 3⁄8

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 x 2

3 x 3

4 x 4

858002

858003

858005

858007

858010

858012

858015

858020

858030

858040

036844

036845

036846

036847

036848

036849

036850

036851

036852

036853

0.302

0.423

0.526

0.722

0.936

1.255

1.476

1.913

2.864

3.786

1.945

2.145

2.130

2.180

2.645

3.125

3.585

3.890

4.275

5.920

0.855

1.000

1.200

1.415

1.755

2.160

2.480

2.945

4.255

5.280

1.645

1.780

1.975

2.360

2.675

3.100

3.830

4.805

6.945

7.125

Schedule 80

UNIONS

FPT x FPT - Viton O-Rings

0.585

0.600

0.810

0.825

1.020

1.155

1.270

1.380

1.555

2.245

44




product



FITTINGS


Nom. Univ. IPEX

Pipe Size Part No. Part No. D L M Q T

¼ x ¼3⁄8 x 3⁄8

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 x 2

3 x 3

4 x 4

898002

898003

898005

898007

898010

898012

898015

898020

898030

898040

236007

236008

036985

036986

036987

036988

036989

036990

036993

236009

0.302

0.423

0.526

0.722

0.936

1.255

1.476

1.913

2.864

3.786

1.940

2.155

2.115

2.350

2.650

3.105

3.070

3.300

4.260

5.860

0.855

1.000

1.200

1.415

1.755

2.160

2.480

2.945

4.255

5.280

1.655

1.780

1.980

2.290

2.665

3.090

3.810

4.785

6.915

6.980

Schedule 80

UNIONS

FPT x FPT - EDPM O-Rings

0.500

0.500

0.815

0.820

1.015

1.130

1.265

1.395

1.545

1.480

ADAPTERS Xirtec Critical Dimensions

Nom. Univ. IPEX

Pipe Size Part No. Part No. D L1 L2 M1 M2 N R

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 x 2

3 x 3

4 x 4Schedule 80

ADAPTERS – MISC

Tank - Soc x FPT

871005

871007

871010

871012

871015

871020

871030

871040

036038

036039

036040

036041

036042

036043

036218

036046

0.526

0.722

0.936

1.255

1.476

1.913

2.864

3.786

2.440

2.470

2.815

2.845

2.815

3.250

4.500

4.000

2.905

2.940

3.315

3.405

3.625

4.125

5.500

5.000

1.220

1.625

1.970

2.315

2.690

3.250

4.565

5.500

2.030

2.250

2.625

3.095

3.595

4.875

6.000

7.500

1.500

1.190

1.250

1.530

1.250

1.625

2.190

1.250

0.625

0.625

0.625

0.625

0.625

0.750

1.000

1.250


Nom. Univ. IPEX

Pipe Size Part No. Part No. D L1 L2 M1 M2 N R

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 x 2

3 x 3

4 x 4

Schedule 80

ADAPTERS – MISC

Tank - FPT x FPT

872005

872007

872010

872012

872015

872020

872030

872040

036047

036048

036049

036050

036051

036052

036053

036055

0.526

0.722

0.936

1.255

1.476

1.913

2.864

3.786

2.190

2.470

2.815

2.845

3.065

3.250

4.500

4.000

2.940

2.940

3.315

3.405

3.595

4.125

5.500

5.000

1.220

1.625

1.970

2.315

2.690

3.250

4.565

5.500

2.030

2.250

2.625

3.095

3.595

4.875

6.000

7.500

1.500

1.500

1.250

1.530

1.690

2.815

2.690

2.000

0.625

0.625

0.625

0.625

0.625

0.750

1.000

1.250

45




product



FITTINGS


Nom. Univ. IPEX

Pipe Size Part No. Part No. AF C D L M T

¼ x ¼3⁄8 x 3⁄8

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 x 2

2-½ x 2-½

3 x 3

4 x 4

6 x 6

Schedule 80

ADAPTERS

Soc x FPT

835002

835003

835005

835007

835010

835012

835015

835020

835025

835030

835040

835060

036209

036210

036211

036212

036213

036214

036215

036216

036217

036218

036219

036221

0.820

1.000

1.385

1.630

1.955

2.385

2.695

3.245

3.830

4.650

5.865

7.590

0.635

0.750

0.890

1.000

1.130

1.270

1.390

1.510

1.770

1.905

2.275

3.005

0.302

0.423

0.526

0.722

0.936

1.255

1.476

1.913

2.290

2.864

3.786

5.709

1.320

1.460

1.745

1.880

2.180

2.365

2.480

2.655

3.355

3.565

4.035

5.260

0.820

1.000

1.250

1.465

1.780

2.160

2.625

2.950

3.540

4.240

5.340

7.590

0.595

0.610

0.750

0.770

0.950

0.980

0.995

1.030

1.405

1.485

1.590

2.055


Nom. Univ. IPEX

Pipe Size Part No. Part No. C D L M S

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 x 2

2-½ x 2-½

3 x 3

4 x 4Schedule 80

ADAPTERS

Soc x MPT

836005

836007

836010

836012

836015

836020

836025

836030

836040

036420

036421

036422

036423

036424

036425

036426

036427

036428

0.890

1.015

1.140

1.270

1.385

1.515

1.765

1.890

2.270

0.526

0.722

0.936

1.255

1.476

1.913

2.290

2.864

3.786

1.890

2.085

2.390

2.610

2.745

2.925

3.510

4.040

4.385

1.250

1.465

1.780

2.160

2.625

2.950

3.540

4.240

5.340

0.755

0.820

0.975

1.020

1.030

1.070

1.410

1.740

1.740


Nom. Univ. IPEX

Pipe Size Part No. Part No. AF D L M N T

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 X 2

3 x 3

4 x 4

Schedule 80

ADAPTERS

Spig x SS Reinforced FPT

878005SR

878007SR

878010SR

878012SR

878015SR

878020SR

878030SR

878040SR

036965

036966

036967

036968

036969

036970

236000

236001

1.395

1.680

2.015

2.170

2.490

3.375

4.285

4.745

0.840

1.050

1.315

1.660

1.900

2.375

3.500

4.500

1.750

1.935

2.250

2.470

2.655

2.815

3.815

4.375

1.220

1.375

1.690

2.065

2.440

3.030

4.280

5.250

0.155

0.190

0.220

0.250

0.280

0.365

0.530

0.625

0.695

0.695

0.890

0.945

0.960

0.990

1.350

1.630

46




product



FITTINGS


Nom. Univ. IPEX

Pipe Size Part No. Part No. AF D L M1 M2 N T

½ x ½

¾ x ¾

1 x 1

1-¼ x 1-¼

1-½ x 1-½

2 x 2

2-½ x 2-½

3 x 3

4 x 4

Schedule 80

ADAPTERS

Soc x SS Reinforced FPT

835005SR

835007SR

835010SR

835012SR

835015SR

835020SR

835025SR

835030SR

835040SR

036971

069972

036973

036974

036975

036976

036977

036978

036979

1.390

1.495

2.015

2.440

2.805

3.375

3.600

4.280

5.805

0.526

0.722

0.936

1.255

1.476

1.913

2.290

2.864

3.786

1.750

1.875

2.155

2.315

2.440

2.690

3.250

3.500

3.970

1.190

1.405

1.750

2.125

2.405

3.000

3.560

4.250

5.220

1.220

1.375

1.690

2.065

2.440

3.030

3.590

4.280

5.250

0.190

0.125

0.125

0.190

0.220

0.280

0.345

0.220

0.125

0.690

0.750

0.915

0.915

0.915

0.940

1.325

1.445

1.530

NIPPLES Xirtec Critical Dimensions

Nom. Univ. IPEX

Pipe Size Part No. Part No. D L

¼ x 7⁄83⁄8 x 1

½ x 1-1⁄8

¾ x 1-3⁄8

1 x 1-½

1-¼ x 1-5⁄8

1-½ x 1-¾

2 x 2

2-½ x 2-½

3 x 2-5⁄8

4 x 2-7⁄8

Schedule 80

NIPPLES

Close

880005

881005

882005

883005

884005

885005

886015

887005

888005

889005

889005

036434

036435

036436

036437

036438

036439

036440

036441

036442

036443

036444

0.302

0.423

0.526

0.722

0.936

1.255

1.476

1.913

2.290

2.864

3.786

0.875

1.000

1.125

1.375

1.500

1.625

1.750

2.000

2.500

2.625

2.875

47



product



FITTINGS


Nom. Univ. IPEX

Pipe Size Part No. Part No. D1 D2 L1 L2

¼ x 1-½

¼ x 2

¼ x 2-½

¼ x 3

¼ x 3-½

¼ x 4

¼ x 4-½

¼ x 5

¼ x 6

¼ x 8

¼ x 10

¼ x 123⁄8 x 1-½

3⁄8 x 23⁄8 x 2-½

3⁄8 x 33⁄8 x 3-½

3⁄8 x 43⁄8 x 4-½

3⁄8 x 53⁄8 x 63⁄8 x 8

½ x 1-½

½ x 2

½ x 2-½

½ x 3

½ x 3-½

½ x 4

½ x 4-½

½ x 5

½ x 5-½

½ x 6

½ x 8

½ x 10

½ x 12

¾ x 1-½

¾ x 2

¾ x 2-½

¾ x 3

¾ x 3-½

¾ x 4

¾ x 4-½

¾ x 5

¾ x 5-½

¾ x 6

¾ x 8

¾ x 10

¾ x 12

Schedule 80

NIPPLES

Standard

880015

880020

880025

880030

880035

880040

880045

880050

880060

880080

880100

880120

881015

881020

881025

881030

881035

881040

881045

881050

881060

881080

882015

882020

882025

882030

882035

882040

882045

882050

882055

882060

882080

882100

882120

883015

883020

883025

883030

883035

883040

883045

883050

883055

883060

883080

883100

883120

036445

036456

036457

036458

036459

036460

036461

036462

036463

036464

236012

236013

036446

036466

036467

036468

036469

036470

036471

036472

036473

036474

036447

036475

036476

036477

036478

036479

036480

036481

036445

036456

036457

036458

036459

036460

036461

036462

036463

036464

236012

236013

036446

036466

036467

036468

036469

036470

0.302

0.302

0.302

0.302

0.302

0.302

0.302

0.302

0.302

0.302

0.302

0.302

0.423

0.423

0.423

0.423

0.423

0.423

0.423

0.423

0.423

0.423

0.526

0.526

0.526

0.526

0.526

0.526

0.526

0.526

0.526

0.526

0.526

0.526

0.526

0.772

0.722

0.722

0.722

0.722

0.722

0.722

0.722

0.722

0.722

0.722

0.722

0.722

0.540

0.540

0.540

0.540

0.540

0.540

0.540

0.540

0.540

0.540

0.540

0.540

0.675

0.675

0.675

0.675

0.675

0.675

0.675

0.675

0.675

0.675

0.840

0.840

0.840

0.840

0.840

0.840

0.840

0.840

0.840

0.840

0.840

0.840

0.840

1.050

1.050

1.050

1.050

1.050

1.050

1.050

1.050

1.050

1.050

1.050

1.050

1.050

1.500

2.000

2.500

3.000

3.500

4.000

4.500

5.000

6.000

8.000

10.000

12.000

1.500

2.000

2.500

3.000

3.500

4.000

4.500

5.000

6.000

8.000

1.500

2.000

2.500

3.000

3.500

4.000

4.500

5.000

5.500

6.000

8.000

10.000

12.000

1.500

2.000

2.500

3.000

3.500

4.000

4.500

5.000

5.500

6.000

8.000

10.000

12.000

0.620

1.120

1.620

2.120

2.620

3.120

3.620

4.120

5.120

7.120

9.120

11.120

0.620

1.120

1.620

2.120

2.620

3.120

3.620

4.120

5.120

7.120

0.440

0.940

1.440

1.940

2.440

2.940

3.440

3.940

4.440

4.940

6.940

8.940

10.940

0.400

0.900

1.400

1.900

2.400

2.900

3.400

3.900

4.400

4.900

6.900

8.900

10.900

Continued

48


product



FITTINGS


Nom. Univ. IPEX


1 x 2

1 x 2-½

1 x 3

1x 3-½

1 x 4

1x 4-½

1 x 5

1 x 5-½

1 x 6

1 x 8

1 x 10

1 x 12

1-¼ x 2

1-¼ x 2-½

1-¼ x 3

1-¼ x 3-½

1-¼ x 4

1-¼ x 4-½

1-¼ x 5

1-¼ x 6

1-¼ x 8

1-¼ x 10

1-¼ x 12

1-½ x 2

1-½ x 2-½

1-½ x 3

1-½ x 3-½

1-½ x 4

1-½ x 4-½

1-½ x 5

1-½ x 5-½

1-½ x 6

1-½ x 8

1-½ x 10

1-½ x 12

2 x 2-½

2 x 3

2 x 3-½

2 x 4

2 x 4-½

2 x 5

2 x 5-½

2 x 6

2 x 8

2 x 10

2 x 12

2-½ x 3

2-½ x 4

2-½ x 5

2-½ x 6

2-½ x 8

2-½ x 10

2-½ x 12

Schedule 80

NIPPLES

Standard Cont.

884020

884025

884030

884035

884040

884045

884050

884055

884060

884080

884100

884120

885020

885025

885030

885035

885040

885045

885050

885060

885080

885100

885120

886020

886025

886030

886035

886040

886045

886050

886055

886060

886080

886100

886120

887025

887030

887035

887040

887045

887050

887055

887060

887080

887100

887120

888030

888040

888050

888060

888080

888100

888120

036471

036472

036473

036474

036447

036475

036476

036477

036478

036479

036480

036481

036450

036516

036517

036518

036519

036520

036521

036522

036523

036524

036525

036451

036526

036527

036528

036529

036530

036531

036532

036533

036534

036535

036536

036452

036539

036540

036541

036542

036543

036544

036545

035546

036547

036548

036549

036550

036272

036551

036552

036276

036553

0.936

0.936

0.936

0.936

0.936

0.936

0.936

0.936

0.936

0.936

0.936

0.936

1.255

1.255

1.255

1.255

1.255

1.255

1.255

1.255

1.255

1.255

1.255

1.476

1.476

1.476

1.476

1.476

1.476

1.476

1.476

1.476

1.476

1.476

1.476

1.913

1.913

1.913

1.913

1.913

1.913

1.913

1.913

1.913

1.913

1.913

2.290

2.290

2.290

2.290

2.290

2.290

2.290

1.315

1.315

1.315

1.315

1.315

1.315

1.315

1.315

1.315

1.315

1.315

1.315

1.660

1.660

1.660

1.660

1.660

1.660

1.660

1.660

1.660

1.660

1.660

1.900

1.900

1.900

1.900

1.900

1.900

1.900

1.900

1.900

1.900

1.900

1.900

2.375

2.375

2.375

2.375

2.375

2.375

2.375

2.375

2.375

2.375

2.375

2.875

2.875

2.875

2.875

2.875

2.875

2.875

2.000

2.500

3.000

3.500

4.000

4.500

5.000

5.500

6.000

8.000

10.000

12.000

2.000

2.500

3.000

3.500

4.000

4.500

5.000

6.000

8.000

10.000

12.000

2.000

2.500

3.000

3.500

4.000

4.500

5.000

5.500

6.000

8.000

10.000

12.000

2.500

3.000

3.500

4.000

4.500

5.000

5.500

6.000

8.000

10.000

12.000

3.000

4.000

5.000

6.000

8.000

10.000

12.000

0.640

1.140

1.640

2.140

2.640

3.140

3.640

4.140

4.640

6.640

8.640

10.640

0.580

1.080

1.580

2.080

2.580

3.080

3.580

4.580

6.580

8.580

10.580

0.560

1.060

1.560

2.060

2.560

3.060

3.560

4.060

4.560

6.560

8.560

10.560

0.980

1.480

1.980

2.480

2.980

3.480

3.980

4.480

6.480

8.480

10.480

0.720

1.720

1.800

3.720

5.720

7.150

9.720

Continued

49


product



FITTINGS


Nom. Univ. IPEX


3 x 3

3 x 4

3 x 5

3 x 6

3 x 8

3 x 10

3 x 12

4 x 4

4 x 5

4 x 6

4 x 8

4 x 10

4 x 12

Schedule 80

NIPPLES

Standard Cont.

889030

889040

889050

889060

889080

889100

889120

890040

890050

890060

890080

890100

890120

036554

036555

035556

035557

036558

036559

035560

036562

036563

036564

036565

036566

036567

2.864

2.864

2.864

2.864

2.864

2.864

2.864

3.786

3.786

3.786

3.786

3.786

3.786

3.500

3.500

3.500

3.500

3.500

3.500

3.500

4.500

4.500

4.500

4.500

4.500

4.500

3.000

4.000

5.000

6.000

8.000

10.000

12.000

4.000

5.000

6.000

8.000

10.000

12.000

0.600

1.600

2.600

3.600

5.600

7.600

9.600

1.400

2.400

3.400

5.400

7.400

9.400

CAPS Xirtec Critical Dimensions

Nom. Univ. IPEX

Pipe Size Part No. Part No. C D M W

¼3⁄8

½

¾

1

1-¼

1-½

2

2-½

3

4

6

8

Schedule 80

CAPS

Soc Cap

847002

847003

847005

847007

847010

847012

847015

847020

847025

847030

847040

847060

847080

036056

035057

036058

036059

036060

036061

036062

036063

036064

036065

036066

036067

036068

0.730

0.870

0.885

1.000

1.125

1.265

1.395

1.510

1.780

1.885

2.285

3.055

5.630

0.300

0.423

0.526

0.722

0.936

1.255

1.476

1.913

2.290

2.864

3.786

5.709

7.565

0.815

0.970

1.185

1.400

1.750

2.090

2.355

2.855

3.525

4.180

5.250

7.585

9.685

0.940

1.155

1.260

1.360

1.580

1.730

1.930

2.145

2.635

2.850

3.335

4.825

6.495

CAPS Xirtec Critical Dimensions

Nom. Univ. IPEX

Pipe Size Part No. Part No. C D M W

¼3⁄8

½

¾

1

1-¼

1-½

2

2-½

3

4

Schedule 80

CAPS

FPT Cap

848002

848003

848005

848007

848010

848012

848015

848020

848025

848030

848040

036072

036073

036074

036075

036076

036077

036078

036079

036080

036081

036082

0.645

0.750

0.875

1.000

1.125

1.250

1.375

1.500

1.750

1.875

2.250

0.300

0.423

0.526

0.722

0.936

1.255

1.476

1.913

2.290

2.864

3.786

0.905

0.970

1.295

1.520

1.830

2.235

2.490

3.040

3.625

4.305

5.470

0.940

0.905

1.185

1.255

1.490

1.500

1.545

1.710

2.440

2.520

2.880

50




product



FITTINGS

PLUGS Xirtec Critical Dimensions

Nom. Univ. IPEX

Pipe Size Part No. Part No. D L T I Q

2

Schedule 80

PLUGS

Spig Plug

849020 036585 2.375 1.875 0.380 1.520

PLUGS Xirtec Critical Dimensions

Nom. Univ. IPEX

Pipe Size Part No. Part No. D L Q S

¼3⁄8

½

¾

1

1-¼

1-½

2

2-½

3

4

6

Schedule 80

PLUGS

MPT Plug

850002

850003

850005

850007

850010

850012

850015

850020

850025

850030

850040

850060

036568

035569

036570

036571

036572

036573

036574

036575

036576

036577

036578

036579

0.540

0.675

0.840

1.050

1.315

1.660

1.900

2.375

2.875

3.500

4.500

6.625

0.725

0.760

0.975

1.050

1.205

1.435

1.460

1.440

1.970

2.000

2.090

2.085

0.635

0.800

1.120

1.375

1.690

2.055

2.315

2.780

3.120

3.740

4.730

6.850

0.545

0.565

0.720

0.750

0.905

1.005

1.025

1.010

1.570

1.630

1.710

1.565

2.565

51



Disclaimer

This brochure has been compiled by Paling Industries Sdn Bhd (“the company”) to promote better understanding of the technical aspects of

the Company’s products to assist users in obtaining from them the best possible performance. The brochure is supplied subject to

acknowledgment of the following conditions:

i) The brochure is protected by Copyright and may not be copied or reproduced in any form or by any means in whole or in part without prior

consent in writing by the Company. ii) Product specifications, usage data and advisory information may change from time to time with

advances in research and field experience. The Company reserves the right to make such changes at any time without notice. iii) Correct

usage of the Company’s products involve engineering judgements which cannot be properly made without full knowledge of all the

conditions pertaining to each specific installation. The Company expressly disclaims all and any liability to any person done by any such

person in reliance whether whole or partial upon the whole or any part of the contents of this brochure. iv) No offer to trade, nor nay

conditions of trading, are expressed or implied by the issue or content of this brochure. v) Nothing herein shall override the Company’s

conditions of Sale, which may be obtained from the Registered Office or nay Sales Office of the Company. vi) This brochure is and shall

remain the property of the Company, and shall surrendered on demand to the Company.

PALING INDUSTRIES SDN BHD (11039 V)

Lot 12, Jalan Perusahaan 4, 68100 Batu Caves, Selangor Darul Ehsan, Malaysia.

Tel: 603 - 6189 8333 (General) / 603 - 6189 6389 (Sales)

Fax: +603 6188 3810

Email: [email protected]

Website: www.paling.com.my

Distributed by:

The Water Del ivery System

Date post:	27-Apr-2020
Category:	Documents
Upload:	others
View:	5 times
Download:	0 times

ASTM uPVC Schedule 80 - Paling - Homepaling.com.my/PDF_Files/Catalogues/Industrial... · Xirtec®...

Documents