ATLANTIC TOOLING AND FABRICATING COMPANY INC. WAS ESTABLISHED IN 1985. A TOOL AND DIE FACILITY WHO ALSO OFFERS SHORT-RUN AND LONG-RUN METAL STAMINGS. CAREFUL PLANNING AND CONTROLLED GROWTH HAS ALLOWED ATFC, INC. TO EXPAND ITS OPERATIONS AND TO BROADEN ASSOCIATED FIELDS OF APPLICATION, WHILE COMMITTING TO CONTINUAL OVERALL QUALITY IMPROVEMENT. FROM INCEPTION ATFC, INC HAS EMBRACED INNOVATION AND MODERN MANUFACTURING METHODS.

26000sq ft FACILITY

LOADING DOCK

BOX AND FLAT BED TRUCKS

330 TON PRESS WITH FEEDER SYSTEM CAPABLE OF RUNNING COIL X 24.00 X 0.187

60in OD / 20in ID / UP TO 6500lbs COILS

(COIL X 15.00 X 0.250)

176 TON PRESS WITH FEEDER SYSTEM CAPABLE OF RUNNING COIL X 24.00 X 0.187

60in OD / 20in ID / UP TO 6500lbs COILS

110 TON PRESS WITH FEEDER SYSTEM CAPABLE OF RUNNING COIL X 12.00 X 0.090

STAMPING FACILITY TO MANUFACTURE SHORT RUN OR LONG RUN STAMPINGS

STUD WELDING CAPABILITIES

400 TON FOR PRODUCTION AS WELL AS DIE TRYOUT

CNC BREAK PRESS CAPABILITIES

CMM CAPABILITIES

LARGE BORING MILLS WITH 20.00in X 84.00in TABLES

SALL TOOLING

SMALL TOOLING AND LARGE PROGRESSIVE DIES

CNC LATHE

OD/ID GRINDER

SURFACE GRINDERS

6.00 X 12.00 UP TO 16.00 X 40.00

9 SMALL MILLS

12.00 X 30.00 UP TO 14.00 X 36.00

ATFC HAS FULL DESIGN CAPABILITIES USING SOLIDWORKS ATFC HAS FULL DESIGN CAPABILITIES USING SOLIDWORKS ALONG WITH 3D QUICK PRESS ADD ON (STRICTLY FOR ALONG WITH 3D QUICK PRESS ADD ON (STRICTLY FOR

PROGRESSIVE DIES).PROGRESSIVE DIES).

3 WIRE EDM MACHINES WITH 10.00 X 12.00 X 6.00 TRAVEL CAPABILITY

LARGE WIRE EDM WITH 14.00 X 21.00 X 12.00 TRAVEL CAPABILITY

OMAX WATER JET WITH 52.00in x 26.00in TABLE

TEMPERATURE CONTROLLED WAREHOUSE WITH LOADING DOCK

EQUIPMENT LISTEQUIPMENT LIST CNC EQUIPMENTCNC EQUIPMENT (3) HITACHI 203 TRAVELING WIRE EDM MACHINE (3) HITACHI 203 TRAVELING WIRE EDM MACHINE

(TABLE TRAVEL 9 X 11, DEPTH CUT 6.7”)(TABLE TRAVEL 9 X 11, DEPTH CUT 6.7”) SODICK AQ550LNIW WEDM – 14” X 21” X 12”SODICK AQ550LNIW WEDM – 14” X 21” X 12” KIA 510 VERTICAL MACHINING CENTER (TRAVEL – X-KIA 510 VERTICAL MACHINING CENTER (TRAVEL – X-

20”, Y-16”, Z-18”) 16 TOOL CHANGE – 7.5 H.P. MOTOR20”, Y-16”, Z-18”) 16 TOOL CHANGE – 7.5 H.P. MOTOR KIA TURNING CENTER (12” SWING, 20” TRAVEL – 12 KIA TURNING CENTER (12” SWING, 20” TRAVEL – 12

STATIONSSTATIONS))

MILLING MACHINESMILLING MACHINES (4) WEB MILLS W 0.0005 TELEDYNE/GURLEY READOUT(4) WEB MILLS W 0.0005 TELEDYNE/GURLEY READOUT (4) SHARP MILLS WITH 0.005 READOUT(4) SHARP MILLS WITH 0.005 READOUT LAGUN FTV 610 MILL W/ 21” X 58” TABLE; 14” X 36” LAGUN FTV 610 MILL W/ 21” X 58” TABLE; 14” X 36”

TRAVEL; WITH DIGITAL READOUTTRAVEL; WITH DIGITAL READOUT (2) KMA-3 SHARP BORING MILLS; 86-5/8 X 19-11/16; (2) KMA-3 SHARP BORING MILLS; 86-5/8 X 19-11/16;

23-5/8” X 59” TRAVEL; 3 AXIS DIGITAL READOUT23-5/8” X 59” TRAVEL; 3 AXIS DIGITAL READOUT

GRINDERSGRINDERS (2) BOYER SCHOLTZ SURFACE GRINDERS 6” X 18”(2) BOYER SCHOLTZ SURFACE GRINDERS 6” X 18” THOMPSON HYDRAULIC WET SURFACE GRINDER 12” X THOMPSON HYDRAULIC WET SURFACE GRINDER 12” X

24”24” CHEVALIER HYDRAULIC WET SURFACE GRINDER 16’ X CHEVALIER HYDRAULIC WET SURFACE GRINDER 16’ X

40” WITH 3 AXIS CONTROLS40” WITH 3 AXIS CONTROLS KENT HYDRAULIC WET SURFACE GRINDER 10” X 20”; KENT HYDRAULIC WET SURFACE GRINDER 10” X 20”;

WITH 3 AXIS CONTROLSWITH 3 AXIS CONTROLS KENT HYDRAULIC WET SURFACE GRINDER 12” X 30” KENT HYDRAULIC WET SURFACE GRINDER 12” X 30”

WITH 3 AXIS CONTROLSWITH 3 AXIS CONTROLS CHEVALIER CYLINDRICAL GRINDER WITH ID CHEVALIER CYLINDRICAL GRINDER WITH ID

ATTACHMENT 11” SWING, 24” TRAVELATTACHMENT 11” SWING, 24” TRAVEL

LATHESLATHES HARDINGE 10” TOOL ROOM LATHEHARDINGE 10” TOOL ROOM LATHE VICTOR – 1660 ENGINE LATHEVICTOR – 1660 ENGINE LATHE

DRILL PRESSESDRILL PRESSES 4 SPINDLE 1/2” CAP. BUFFALO MULTI SPINDLE4 SPINDLE 1/2” CAP. BUFFALO MULTI SPINDLE 4’ RADIAL DRILL PRESS – KMR-1100S4’ RADIAL DRILL PRESS – KMR-1100S

SAWSSAWS KALAMAZOO 20” HORIZONTAL BAND SAW WITH COOLANTKALAMAZOO 20” HORIZONTAL BAND SAW WITH COOLANT JOHNSON 20” HORIZONTAL BAND SAW WITH COOLANTJOHNSON 20” HORIZONTAL BAND SAW WITH COOLANT GROBE 4V-24” WITH 1” WLDR & AUTO FEED TABLEGROBE 4V-24” WITH 1” WLDR & AUTO FEED TABLE

PRESSESPRESSES 27 TON L&J (13” X 22” BED; 9”SH; 2” SLIDE SDJ; 2-1/2” 27 TON L&J (13” X 22” BED; 9”SH; 2” SLIDE SDJ; 2-1/2”

STROKE)STROKE) 22 TON JOHNSON22 TON JOHNSON 60 TON L&J (18” X 30” BED; 11”SH; 3” SLIDE ADJ; 4” 60 TON L&J (18” X 30” BED; 11”SH; 3” SLIDE ADJ; 4”

STROKE)STROKE) 75 TON BLISS (24” X 36” BED; 17-1/2 SH; 4” SLIDE ADJ; 2” 75 TON BLISS (24” X 36” BED; 17-1/2 SH; 4” SLIDE ADJ; 2”

STROKE)STROKE) 100 TON HEIM ( 26” X 36” BED; 16-1/2 SH; 4” SLIDE ADJ; 100 TON HEIM ( 26” X 36” BED; 16-1/2 SH; 4” SLIDE ADJ;

6” STROKE)6” STROKE) 176 TON NIAGRA SEYI PRESS (30” X 80” BED SERVOMATIC 176 TON NIAGRA SEYI PRESS (30” X 80” BED SERVOMATIC

FEED – 0.187 X 24” MAT’L; DERELLER & STRAIGHTENER)FEED – 0.187 X 24” MAT’L; DERELLER & STRAIGHTENER) 200 TON STRAIGHT SIDE HEIM (42” X 77” BED; 26” SH; 6” 200 TON STRAIGHT SIDE HEIM (42” X 77” BED; 26” SH; 6”

SLIDE ADJ; 6” STROKE)SLIDE ADJ; 6” STROKE) 330 TON AIDA STRAIGHT SIDE (48” X 84” BED; 330 TON AIDA STRAIGHT SIDE (48” X 84” BED;

SERVOMATIC FEED – 0.187 X 24” MAT’L; DERELLER & SERVOMATIC FEED – 0.187 X 24” MAT’L; DERELLER & STRAIGHTENER)STRAIGHTENER)

HURCO PH 40 – 20 PRESS BRAKEHURCO PH 40 – 20 PRESS BRAKE (2) TOYOKOKI NC CONTROLLED BRAKE (18TON CAPACITY – (2) TOYOKOKI NC CONTROLLED BRAKE (18TON CAPACITY –

3AXIS CONTROL- CONVENIENT STORAGE)3AXIS CONTROL- CONVENIENT STORAGE)

EQUIPMENT LISTEQUIPMENT LIST HEAT TREATINGHEAT TREATING CRESS 2250deg ELECTRIC FURNACE 5-1/2” X 6” X 8”CRESS 2250deg ELECTRIC FURNACE 5-1/2” X 6” X 8” (2) CRESS 2250deg ELECTRIC FURNACE 8” X 10” X 12”(2) CRESS 2250deg ELECTRIC FURNACE 8” X 10” X 12” CRESS 2250deg ELECTRIC FURNACE 12” X 12” X 20”CRESS 2250deg ELECTRIC FURNACE 12” X 12” X 20”

WELDING EQUIPMENTWELDING EQUIPMENT MILLER XMT 300 ARC WELDER WITH ARC GOUGING MILLER XMT 300 ARC WELDER WITH ARC GOUGING

EQUIPMENTEQUIPMENT MILLER SP-130T ALUMINUM WELDERMILLER SP-130T ALUMINUM WELDER (2) MILLERMATIC 200 MIG WELDER(2) MILLERMATIC 200 MIG WELDER AIRCO OXYGEN/ACETYLENEAIRCO OXYGEN/ACETYLENE TJ SNOW RESISTANCE WELDERTJ SNOW RESISTANCE WELDER

CRANESCRANES 5 TON OVERHEAD CRANE5 TON OVERHEAD CRANE 5 TON “A” FRAME CRANE5 TON “A” FRAME CRANE 3 TON OVERHEAD CRANE3 TON OVERHEAD CRANE

MISCELLANEOUSMISCELLANEOUS SUNNEN HONING MACHINESUNNEN HONING MACHINE VIBRITORY FINISHING MACHINEVIBRITORY FINISHING MACHINE BROWN AND SHARP CMM GAGE 2000BROWN AND SHARP CMM GAGE 2000 CMM –NUMEREX WITH FULL FEATURES (10”X12”X13”)CMM –NUMEREX WITH FULL FEATURES (10”X12”X13”) S&T COMPARATORS&T COMPARATOR 5000lb GAS FORKLIFT5000lb GAS FORKLIFT 5000lb ELECTRIC FORKLIFT5000lb ELECTRIC FORKLIFT 10000lb GAS FORKLIFT10000lb GAS FORKLIFT 12000lb GAS FORKLIFT12000lb GAS FORKLIFT

SHOP VEHICLESSHOP VEHICLES (1) ¾ TON TRUCK(1) ¾ TON TRUCK (1) 26 TON FLAT BED TRUCK(1) 26 TON FLAT BED TRUCK (1) 26 TON ENCLOSED TRUCK(1) 26 TON ENCLOSED TRUCK

PHONE: (843) 662-7379

FAX: (843) 662-5387

EMAIL: ATLANTICTOOLING1@SC.RR.COM

301 QUINBY PLAZA301 QUINBY PLAZA

PO BOX 15124PO BOX 15124

QUINBY, SC 29506QUINBY, SC 29506

PRESIDENT: CHAD LYERLY

VICE PRESIDENT/GENERAL MGR: LARRY LYERLY