1
Insert picture here and delete this rectangle
Atlas Copco Product Presentation
M.V.R.SUBBARAO
Hyderabad
BVB 25 Wagon Drill: Robust Rubber tyred three
wheeled wagon drill.
Available In both DTH & TH versions
Mostly used in cement and small mines
Top Hammer : 48-76mm
DTH : 85 – 130 mm
Can be converted TH to DTH and vice versa using conversion kit
450cfm/150 psi Compressor (XAH 210)
LM 100 Crawler Rig One of the most popular crawler
drill rigs used in quarries
Suitable for DTH drilling
Hole Dia : 105 – 115 mm
Hammer Used : QL 40
Drilling Rate : 8 – 12 m/hr
No track oscillation Cylinder
Compressor : 450 Cfm / 150 psi
Horizontal Drilling possible
Option of water injection system exists for dust control
CM 341 Crawler Rig More Powerful and versatile rig
compared to LM 100 and is suited for much tougher jobs.
Intended for quarrying and Open cast mining.
Suited for DTH Drilling for hole dia105 -115mm.
Hydraulic track oscillation cylinders present.
Hammer used QL 40
Can be packaged with both 450cfm/150 psi or 600cfm/200psi(for higher drilling rates)
Option of dust collector exist
ROC 203: Crawler mounted Pneumatic drill rig
with hydraulic traction
Available in Both TH & DTH Versions and can be interchanged using a conversion kit
TH : 48 – 76mm
DTH : 85 – 130 mm
Compressor : 450cfm/150 psi
Toe hole drilling possible using this drill
Option of Dust Collector exists
Has got much smaller turning radius therefore much easier to maneuver
ICM 260 Light weight fully hydraulic drill with
on board compressor
Suitable for DTH drilling, 105 -115mm hole dia. Range
Hammer used : QL 40
Mostly used in cement mines
Compressor rating: 300cfm/200psi
Manual Rod changer
Water injection system provided for dust suppression
Prime Mover : Cummins engine, 6BTA5.9C
IBH 10 One of the most common and
popular 6 inch pneumatic Crawler drill in India.
Can be converted for 41/2” drilling if required
Compressor : 520cfm/170psi
Hole Range : 152mm
Max Hole Depth : 14.63m/18.20 m through 3/4 rod changer
Engine : Cummins
CM 470:
Rugged and simple crawler drill with direct hydraulic controls
Hole Range : 64-89mm
Used mainly to avoid oversized boulders in quarry application
Drilling by 15 KW rock drill Compressor :
FAD : 176 Cfm, 8 bar Engine : Cummins
ROC T15 Smallest surface drill in the range
Compact, small and powerful hydraulic drill
Hole Range : 23 – 45 mm
Radio Remote Control Option exists
Suitable for Small Construction jobs, DSI & unique construction jobs like bolting, boulder blasting and trenching etc.
Weight : 2800 Kg (Excluding Options)
ROC L6 High Capacity DTH crawler
drills primarily designed for quarry blast hole drilling
Hole Range : 95-152mm
Compressor: XRX 10
Engine : C11,C13
FAD @ 25 bar : 625 cfm
@ 30 bar : 750cfm
Automatic Rod Handling system
FOPS/ROPS protected cabin
Hammers Used : TD 35, COP 44, COP 54 GE
ROC L8 High Capacity Crawler drill
suitable for large scale mining operations
Hole Range : 110 – 203mm
Compressor : XRX 10, 858 cfm at 25 bar/363psi
C13, C15 water cooler turbo charged engines being used
ROPS & FOPS approved air conditioned cabin
Automatic rod handling system
No levelling jacks
Weight excluding option 22.6 tonnes
IDM 30 Self contained completely
hydraulic, self propelled blast hole drill.
Available In both diesel and electrical versions
Hole dia : 152-165mm
Available in both DTH/rotary drilling versions
Pull down force : 30,000 lb
Twin cylone for dust suppression
Max Drilling : 27.4m
Single pass drilling : 7.12m
IDM 45 Self contained completely
hydraulic, self propelled blast hole drill.
Available In both diesel and electrical versions
Hole dia : 200-250mm
Available in both DTH/rotary drilling versions
Pull down force : 45,000 lb
Twin cylone for dust suppression
IDM 70 Self contained completely
hydraulic, self propelled blast hole drill.
Available In both diesel and electrical versions
Hole dia : 229-270mm
Available in both DTH/rotary drilling versions
Pull down force : 70,000 lb
Twin cylone for dust suppression
Boomer Range SnapshotS.No Boomer Model Coverage Area
1 Boomer S1 L 6 - 29m2
2 Boomer S1 D 6 - 31m2
3 Boomer 104 6 - 20m2
4 Boomer 281 6 - 31m2
5 Boomer L1 C 15 - 64m2
6 Boomer 282 8 - 45m2
7 Boomer E2 C 112m2
8 Boomer M2 D 10 - 53m2
9 Boomer L2 D 15 - 104 m2
10 Boomer E3 C 137 m2
11 Boomer XE3 C 198 m2
12 Boomer WE3 c 186 m2
Single Boom
Twin Boom
Three Boom
CONSTRUCTION TOOLS ( CTO )
HYDRAULIC BREAKERSalient Features:Works on Oil gas Principle
Auto Control
Vibro Silenced
Contilube
Patented Helicoil system
Energy Recovery, higher impact energy
Applications Trenching
Road Construction
Secondary Breaking & many more
Our Breaker RangeS.No Breaker Model Carrier Weight Working tool dia. Operating Weight
1 SB 302 4.5 - 9.0 t 80 mm 304 Kg2 SB 452 6.5-13.0 t 95 mm 441 Kg3 SB 552 9.0 - 15.0 t 100 mm 521 Kg
4 MB 750 10 -17 t 100mm 750 Kg5 MB 1200 15-26 t 120mm 1200 Kg6 MB 1500 17-29 t 135mm 1500 Kg7 MB 1700 19-32 t 140mm 1700 Kg
8 HB 2200 26 - 40 t 150mm 2200 Kg9 HB 3000 32 - 50 t 165 mm 3000 Kg
10 HB 3600 35 - 63 t 170mm 3600 Kg11 HB 4200 42 - 75 t 180 mm 4200 Kg12 HB 5800 58 - 100 t 200 mm 5800 Kg13 HB 7000 70 - 120 t 210 mm 7000 Kg14 HB 10000 85 - 140 t 240 mm 10000 Kg
Small Breakers
Medium Breakers
Heavy Breakers
Hydraulic Compactor 100% faster when compared to
manual method of compaction
Much Higher Compaction
Better Finishing
Lesser Undulation Which saves concrete.
Due to uniform compaction, concrete consumption is less and hence lesser costs
Cuts down dependency on labour.
Contd…Salient Features Constant Lubrication System
Integrated input flow and pressure control
Flat top mounting base for versatility
Removable base plate (HC 920 - HC 2041)
Application Areas Irrigation Canals
Pipeline Projects
Hydropower
Urban Development(water/sewage)
Many more areas which are still to be explored
Hydraulic Compactor Specs:HC 308 HC 409 HC 920 HC 2040 HC 2041
Carrier Weight Class t 3 to 8 4 to 9 9 to 20 20 to 40 20 to 40Service Weight Kg 320 430 880 1050 1055Oil flow rate l/min 57 76 114 151 189Operating Pressure bar 150 150 150 150 150Vibrating force t 2.3 3.6 7.3 10.5 11.4Vibrating Frequency n/min 2100 2200 2200 2200 2200Base Plate Size (W X L) mm 455 x 693 610 x 929 710x1178 864x1136 864x1136Plate Coverage m2 0.24 0.42 0.63 0.74 0.74Height mm 623 622 764 786 786
HC- Hydraulic Compactors
CTO Special Prducts
Combi Cutter
• Demolition
• Reduction
• Recycling
Pulveriser
• Building Demolition
• Seperation of concrete and rebar
• Secondary reduction of concrete elements
Multi Grapple
• Light Demolition
• Sorting & Loading
Pionjar
• Breaking Concrete
•Cutting Asphalt
•Tamping and Compacting
24
We are committed to your superior productivity throughinteraction and innovation.