+ All Categories
Home > Documents > ATLAS COPCO Tensor STR21 Electric Tools UK

ATLAS COPCO Tensor STR21 Electric Tools UK

Date post: 24-Apr-2015
Category:
Upload: renatosartre
View: 73 times
Download: 13 times
Share this document with a friend
6
Tensor STR21 electric tools Fast and light, one-handed operation
Transcript
Page 1: ATLAS COPCO Tensor STR21 Electric Tools UK

Tensor STR21 electric tools Fast and light, one-handed operation

Page 2: ATLAS COPCO Tensor STR21 Electric Tools UK

State-of-the-art tools that will boost your productivityIntroducing an exciting new generation of advanced nutrunners/screwdrivers: Tensor STR21. Due to the new STR21 motor, these lightweight angle and straight tools offer more than twice the speed, and extremely fast rundown. Yet thanks to their low weight, low reaction force and compact ergonomic designs, they place minimum strain on the operator.

Tensor STR21 tools offer all the benefits of the Tensor ST range, plus greater accessibility. Their compact designs enable you to work in the most cramped spaces. You can work a full shift without fatigue.

Tensor STR21 nutrunners/screwdrivers are designed to be partnered with Power Focus 4000 controllers for zero-fault pro-cess control. This makes them an excellent choice for quality and safety critical applications in a wide range of manufactu-ring industries, such as the motor vehicle industry, appliances, electronics, aerospace, offroad, and many others.

Ultra compact and slim design...

Spiral gear

ESD protection

Push to start

Front LED’s

Configurable signal lights for instant feedback

Page 3: ATLAS COPCO Tensor STR21 Electric Tools UK

...gives low weight and good ergonomics

One-handed operation

New powerful STR motor

Same cable and control-ler for ST tool

Choose your option from the function button

Superior speed will double your productivity

Digital communication for hot swap of tools

Robust aluminum housing

Ergonomic handle

Configurable buzzer

Page 4: ATLAS COPCO Tensor STR21 Electric Tools UK

The performance you need With a torque range of up to 25 Nm, the light weight, power, and lightning fast rundown of the Tensor STR21 tools will make your production much more cost-effective and put you ahead of the game. Speed alone doesn’t raise productivity, the tool must also be robust. Heat was a challenge we were able to overcome with the new, powerful STR21 motor.

Proven transducer enables data recording In Tensor STR21 tools the built-in torque transducer allows highest possible tightening accuracy while ensuring that all tightening data can be recorded.

Ergonomic features Tensor STR21 tools offer genuine ergonomic advantages for the operator which in turn raises individual productivity.• New ergonomic grips that ensure a perfect grip in tough

environments.• Low tool weight and high spindle speed reduce cycle time

and raise productivity• Awkward working positions caused by using heavy tools

are eliminated• Lightweight components help reduce operator fatigue

Suitable for a wide range of applications

Safety critical applications in the motor vehicle industryApplications include: Seat to floor, instrument panel instal-lation, safety belt installation, battery terminal, ground earth cable, clash sensor, wheel pressure sensor.

Many of the joints are prevailing torque applications. The Tensor STR21 tool has the capability to accelerate to top speed in a short time to avoid heating problems.

An ideal tool to work withSometimes one-handed operation is better from an ergono-mics point of view than two-handed operation. The Tensor STR21 offers this option. It is also very light, easy to operate

With safety in mindA mounting point on the front of the head allows the attach-ment of finger protection, safety extensions and reaction devices that reduce the risk of work-related injuries.

Zero-fault process control with Power Focus 4000 controller When a Tensor STR21 tool is connected to the Power Focus 4000 controller, the tightening data is sent digitally to the controller where the information can be utilized for process improvement, quality assurance or documented traceability.

Continuous operator feedback Four signal lights, including a blue LED, can be configured, for example, to indicate when a “batch” of screws have all been tightened. Yellow and red LEDs ensure immediate detection of NOK fasteners, direct at the point of failure. The tool can also be configured to alert the operator with audio signals.

and provides good operator feedback via lights and sounds.Many applications in a vehicle assembly plant, such as

the cooling system and front-end module, allow very limited space for operating hand tools. With the compact design of the Tensor STR21, this is no problem.

Applications in Tier 1 and electronics industriesThe ESD-certified Tensor STR21 eliminates potential risk of component damage due to electrostatic discharge.

Many industries use electric components, from PCs to the electric inverter, motor and battery in a car. ESD might not occur immediately, but the risk of component failure is very high.

Page 5: ATLAS COPCO Tensor STR21 Electric Tools UK

Tensor STR21 – the ideal choice for all critical joints• Safety belt installation • Hose clamp attachment • Motor cover attachment • Hinge assembly

• Tier 1 – Seat assembly, motor cooling systems (fan, cooler), air conditioning

Page 6: ATLAS COPCO Tensor STR21 Electric Tools UK

www.atlascopco.com 9833

195

9 01

Jet

lag

/ Boa

rdw

alk,

Ått

a.45

Try

cker

i AB

201

0:1

Technical data – Tensor ETD/ETV STR21

Controller hardware

Power Focus W10 Ordering No.

PF 4000-G-HW W10 8433 7100 00

PF 4000-C-HW W10 8433 7100 05

PF 4000-G-DN- HW W10 8433 7140 00

PF 4000-C-DN-HW W10 8433 7140 05

PF 4000-G-FLN-HW W10 8433 7141 00

PF 4000-C-FLN-HW W10 8433 7141 05

PF 4000-G-PB-HW W10 8433 7142 00

PF 4000-C-PB-HW W10 8433 7142 05

PF 4000-G-CC-HW W10 8433 7143 00

PF 4000-C-CC-HW W10 8433 7143 05

PF 4000-G-IB-HW W10 8433 7145 00

PF 4000-C-IB-HW W10 8433 7145 05

PF 4000-G-MB-HW W10 8433 7147 00

PF 4000-C-MB-HW W10 8433 7147 05

PF 4000-G-PN-HW W10 8433 7148 00

PF 4000-C-PN-HW W10 8433 7148 05

PF 4000-G-EIP-HW W10 8433 7149 00

PF 4000-C-EIP-HW W10 8433 7149 05

ToolsTalk software

Model Ordering No.

TTPF W10 1 User 8092 1190 01

TTPF W10 5 User 8092 1190 05

TTPF W10 10 User 8092 1190 10

TTPF W10 Plant license 8092 1190 99

TTPF W07 > W10 1 User 8092 1190 31

TTPF W07 > W10 1 User 8092 1190 35

TTPF W07 > W10 10 User 8092 1190 40

TTPF W07 > W10 Plant license 8092 1190 49

TTPF W05 > W10 1 User 8092 1190 51

TTPF W05 > W10 1 User 8092 1190 55

TTPF W05 > W10 10 User 8092 1190 60

TTPF W05 > W10 Plant license 8092 1190 69

Controller software

Model Ordering No.

RBU-Bronze 8433 0010 10

RBU-Silver 8433 0015 20

RBU-Gold 8433 0020 20

Model

Torque rangeSpeedr/min

WeightLength

mmCS distance

mm Ordering No.Nm ft Ib kg Ib

Angle tools

ETV STR21-12-10 2.5 - 12 1.9 - 8.9 1350 1.1 2.4 297 14 8436 6120 12

ETV STR21-25-10 5 - 25 3.7 - 18.5 1000 1.2 2.6 312 14 8436 6120 25

Straight tools

ETD STR21-07-I06-PS 1.5 - 7 1.0 - 5.2 2090 0.9 1.9 259 24 8436 6220 07

ETD STR21-16-I06-PS 3.5 - 16 2.6 - 11.8 1460 1.0 2.2 276 24 8436 6220 16

Stacklight ESL-048433 0570 13

Selector 48433 0610 04

Operator Panel advanced8433 0565 00

MAXI Display8435 3070 10

Mini Display8435 3070 00

WEA Flex8433 1010 00

1

6

2

7

3

8

4

9,10

5

Accessories

No. Denomination Ordering No.

1 Suspension yoke for Rear end 4220 4410 80

2 Suspension yoke for Front end 4220 4409 80

3 Support handle 4220 4347 80

4 Spoon lever 4220 4338 83

5 Long lever (accessory included with ETV) 4220 4338 81

6 Short lever (accessory included with ETD) 4220 4338 82

7 Cover for standard socket M27*0.75L 4220 3154 03

8 Safety extension 4220 3868 80

9 Protective cover for STR21-12 4220 4572 00

10 Protective cover for STR21-25 4220 4572 01

Model Ordering No.

5 m 90° cable 4220 3891 05

7 m 90° cable 4220 3891 07

10 m 90° cable 4220 3891 10

15 m 90° cable 4220 3891 15

5 m cable 4220 2636 05

7 m cable 4220 2636 07

10 m cable 4220 2636 10

15 m cable 4220 2636 15

Extension 5 m cable 4220 1007 05

Extension 10 m cable 4220 1007 10

Extension 15 m cable 4220 1007 15

Cable

QIF Modules

For all models in the table declared noise and vibration emissions according to ISO 15744 and ISO 28927-2 are: sound pressure level <70 dB(A) and vibrations <2.5 m/s2.


Recommended