ATLAS COPCO CONSTRUCTION TOOLSPH: 1300 925 826 WEB: www.waltan.com.au
#106
THE QUICkEST AND EASIEST WAy TO START WORkINg RIgHT AWAy
VIBRATION REDUCED HAMMERSAtlas Copco TEX - PE SERIES
WeightLengthAir consumptionImpact rateVibration level 3 axes (ISO 28927-10)Sound power level guaranteed, Lw (2000/14/EC)Sound pressure level, Lp, r=1 m (ISO 11203)Tool retainerShank size HEXPart Number
kgmml/s
blows/minm/sec²dB(A)dB(A)
mm
6.545010
16402.410587
cap19x50
8461 0219 10
10.556017
18004.210593
latch22x82.5
8461 0211 35
1259020
16204.010593
latch22x82.5
8461 0211 38
These technically unique hammers combine many well-proven characteristics of classic TEX hammers with a number of advanced new features. Their modern and innovative design gives enhanced operator comfort while maintaining the renowned performance of their predecessors. They offer great handling and easy positioning, even in confined spaces.
Atlas Copco’s HAPSTM, Hand and Arm Protection System, helps to reduce the operator’s exposure to vibrations. The new design enables a lower vibration exposure level for the operator to be achieved at a given working time. As operator comfort is a number one priority, the new models also offer an efficient noise reduction system.
OH&S Issues due to vibration are minimised.
Ph: 1300 WALTAN (1300 925 826) Fax: (08) 8297 0500 Email: [email protected]
Steels to suit TEX 09PE & TEX 12PE
P140 Shank: Hexagon 22mm x 82mm
Type Part Number OA Length
mm
Moil Point 9931514002 370
9931514004 440
9931514008 465
9931514010 485
9931514014 540
9931514017 600
9931514018 750
9931514019 900
9931514020 985
9931514021 1000
9931514022 1285
9931514023 1585
9931514024 1885
Flat Chisel 9931514030 370
9931514032 440
9931514034 465
9931514036 485
9931514038 540
9931514040 600
9931514042 985
9931514043 1150
9931514044 1285
9931514046 1585
9931514047 1885
Wide Chisel 75mm 9931514053 445
9931514055 535
9931514057 1800
Digging Chisel 75mm 9931514073 520
Clay Spade 140mm 9931514076 510
Asphalt Cutter 125mm 9931514080 375
Steels to suit TEX 05PE
P131 Shank: Hexagon 19mm x 50mm
Type Part Number OA Length
mm
Moil Point 9931513102 300
9931513104 325
9931513106 400
9931513108 500
9931513110 1015
9931513112 1250
9931513114 1450
9931513116 1850
Flat Chisel 9931513120 300
9931513122 325
9931513124 400
9931513126 500
9931513128 1015
9931513130 1100
9931513132 1250
9931513134 1450
9931513136 1850
Wide Chisel 60mm 9931513150 300
Wide Chisel 75mm 9931513154 300
Wide Chisel 60mm Bent 9931513158 300