Atlas%20copco%20facts%20book

Construction ToolsFacts book

2

Welcome to Atlas CopcoConstruction Tools

Our name stands for sustainable productivityAn investment in quality is an investment in sustainability and reliability. Intelligent engineering, top quality materials, first-class components and modern engines with low fuel consumption and emissions are the preconditions that enable us to offer long lasting products with high trade-in values. To keep things that way and to maximize your uptime we provide reliable service whenever and wherever you need it.

At the end of the day, you get the job done with good results. And in the long run you get less maintenance, higher efficiency and lower lifecycle costs.

It makes sense to choose lowest lifecycle cost The total cost of owning equipment over its lifecycle is largely due to operating costs such as maintenance, spare parts and energy. Therefore it pays off to choose Atlas Copco products. They offer low maintenance, high performance, long lifetimes and high resale value. This adds up to lower cost of ownership, even if the initial investment might be slightly higher.

Ergonomic tool design at its best Good tool ergonomics also lead to sustainable productivity. We aim to minimize the physical impact on the operator by designing tools that are powerful and comfortable to hold, with low noise, vibration and emission levels.

Low maintenance costs, high availability Tailor-made maintenance kits, genuine working tools, accessories and warranty programs. These all help to keep maintenance costs down and contribute to sustainable productivity.

3

Valuable support from a global partner Atlas Copco Construction Tools’ global network consists of more than 60 customer centers and over 1,000 distributors around the globe. We have the knowledge and experience to help you choose the best tools for the job – tools that will keep on working – and we provide you with professional advice, on-site training, assistance and service. It all adds up to sustainable productivity.

Latest News:

A full range of light compaction and concrete equipmentTo further strengthen our offer for the construction and rental industry, we lately added a full range of light compac-tion and concrete equipment to our product portfolio.

Compaction equipment• Rammers • Forward and reversible plates• Double drum rollers

Concrete equipment• Trowels• Screeds• Pokers• External vibrators• Floor saw

For more details please see the chapters ”Compaction Equipment” and ”Concrete Equipment”.

4

Construction and Maintenance

5

6

Demolition and Recycling

7

8

Open Pit mining and Quarrying

9

10

Compaction equipment – expect more

Get the job done faster...The Atlas Copco range of compaction equipment will take your productivity to a whole new level. Outstanding com-paction efficiency – thanks to superior forces and the high speed of our rammers, plates and rollers – enables you to get the job done faster and squeeze more into your daily schedule.

Easier...Making your workday easier and more productive isour highest priority. Starting, maneuvering and trans-portation of products from our compaction range is made easy with smart engineering solutions such as the rammer air breather system, water distribution system on the forward plates or the compact design of our roll-ers with hydraulic transmission. User friendly design and low hand/arm vibration makes work easier and increase efficiency further.

And more cost efficientYou need equipment built to last longer; machines with long service intervals and low life cycle cost. Our innova-tive designs come from long experience in the industry, and from keeping close ties with customers like you in order to match your needs and increase productivity.

Co

mp

aC

tio

n

eq

uip

me

nt

11

12

Rammers LT5004

6" 9"

Net mass kg 64 65

Operating mass kg 65 66

Frequency Hz 11 11

Amplitude mm 50-60 50-60

Speed m/min 15-18 15-18

Force/blow kN 10 10

H/A vibrations, standard handle m/s2 6,4 6,4

Sound power, guaranteed dB(A) 104 104

Sound pressure at operators ear dB(A) 91 91

Dimensions

Plate width mm 150 230

Plate length mm 330 330

LxWxH mm 730x395x1015 730x395x1015

Engine

Model Honda GX100

Rated power at 3600 rpm kW 2,2

Part number 3382 0000 05 3382 0000 04

Rammers

Applications:• Compacting medium to deep layers of

cohesive soils, such as clay or silt but also sand and gravel

• Repair jobs and in confined areas such as trenches, around pillars and on housing sites

Advantages:• High compaction efficiency• Easy to operate • Service friendly • Low maintenance and low fuel consumption

Features:• Sealed, multi-function tank with throttle control

(Stop/Idle/Run)• Honda 4-stroke engine with new carburetor • Patented air breather system for easy start• Easy access to all daily service points• Efficient shock absorbers

Important: Full details of measurement is available in the Safety and Operating Instruction of the product. It can be found on www.acprintshop.com.

Co

mp

aC

tio

n

eq

uip

me

nt

13

Important: Full details of measurements are available in the Operation & Maintenance Manuals of the product (ID number: ILT6004EN). It can be found on www.dynapac.com/en/partsandservices/dynadoc/

LT6004 LT7000 LT800

9" 11" 11" 11" 13"

73 74 77 83 84

74 75 78 84 85

12 12 12 12 12

65-75 65-75 70-80 75-85 75-85

15-18 15-18 15-18 13-16 13-16

14,8 14,8 18,6 21,4 21,4

4,9 4,9 9,6 12,6 12,6

104 104 107 106 106

91 91 96 96 96

230 280 280 280 330

330 330 330 330 330

730x395x1060 730x395x1060 730x395x1074 mm 810x422x1074 810x422x1074

Honda GX100 Honda GX120 Hatz 1B20

2,2 2,9 3,4

3382 0000 03 3382 0000 02 3382 0000 52 3382 0000 50 3382 0000 51

14

Forward plate compactors LF50 LF60

Operating weight kg 52,5 57,5

Frequency Hz 95 95

Amplitude mm 0,9 0,9

Centrifugal force kN 8,4 10,4

Speed m/min 24 25


H/A vibrations, vibr reduced handle m/s2 1,8 1,9



Dimensions



LxWxH mm 940x320x965 940x350x965

Engine

ModelHonda GX100

SE3 OHHonda GX100

SE3 OH

Rated power at 3600 rpm kW 2,2 2,2

Part number 3382 0000 32 1) 3382 0000 33 1)

Part number with water tank

Forward plate compactorsSoil compaction

Applications:• Compacting thin to medium layers of

granular soils• Block paving• Repair jobs and maintenance work such as driveways,

sidewalks and parking lots

Advantages:• High speed• Operator comfort • Easy transportation • Longer service life


Co

mp

aC

tio

n

eq

uip

me

nt

15

LF80 LF100 LF130

Petrol Diesel Petrol Diesel

82,1 94,9 103,7 134,7 141,0

95 95 95 95 95

1,3 0,9 0,9 0,9 0,9

19 17 17 20 20

34 25 25 22 22

6,7 6,0 9,3 5,4 9,3

1,2 1,3 1,9 1,1 1,9

103 104 104 104 104

91 93 93 93 93

420 500 500 500 500

570 595 595 580 580

960x420x995 960x500x995 960x500x995 960x500x995 960x500x995

HondaGX160 UT1 SXS4 OH

HondaGX160 UT1 SXS4 OH

Hatz 1B20HondaGX160 UT1

SXS4 OHHatz 1B20

4,1 4,1 2,5 4,1 2,5

3382 0000 25 1) 3382 0000 28 1) 3382 0000 30 1) 3382 0000 34 3382 0000 35

3382 0000 26 3382 0000 27 3382 0000 29

Features:• Specially engineered bottom plate• Unique vibration-reduced handle • Removable, 13-liter water tank as option• Wheels for easy transfer around work sites• Stowable handle for easy transportation and storage• Long life V-belt thanks to cooling fan and ventilated

cover

Options: • Block paving kit (LF75-130)• Fork lifting device (LF75-100, standard on LF130)• Water tank. For upgrading soil plates to Soil & Asphalt

versions)

1) transport wheels as option

16

Forward plate compactors LF75

420 mm 500 mm

Operating weight kg 91,7 94,5

Frequency Hz 95 95


Centrifugal force kN 15 15

Speed m/min 27 25


H/A vibrations, vibr reduced handle m/s2 1,2 1,2

Water sprinkler kit l 13 13



Dimensions



LxWxH mm 960x420x995 960x500x995

Engine

Model HondaGX160 UT1 SXS4 OH


Part number 3382 0000 23 3382 0000 21

Part number without water tank 3382 0000 22 1) 3382 0000 24 1)

Forward plate compactorsAsphalt compaction

Applications:• Asphalt repair and maintenance work

such as driveways, sidewalks and parking lots• Compacting thin to medium layers of granular soils• Block paving

Advantages:• High speed• Operator comfort • Easy transportation • Longer service life

Features:• Smart water distribution system • Removable, 13-liter water tank • Patented vibration-reduced handle• Specially engineered bottom plate• Wheels for easy transport around work sites• Stowable handle for easy transportation and storage


Co

mp

aC

tio

n

eq

uip

me

nt

17

LF100

Petrol Petrol. With extra weight Diesel

94,6 107,1 116,1

95 95 95

0,9 0,9 0,9

17 17 17

25 25 25

6,0 6,0 9,3

1,3 1,3 1,9

13 13 13

104 104 104

93 93 93

500 500 500

595 595 595

960x500x995 960x500x995 960x500x995

HondaGX160 UT1 SXS4 OH Hatz 1B20

4,1 4,1 2,5

3382 0000 31 1) 3382 0000 27 3382 0000 29

3382 0000 28 1) 3382 0000 30 1)

1) transport wheels as option

18

Long-term investment in efficiency

High speed and world-class compaction efficiency make our forward and revisable plates excellent for compacting medium to deep layers of granular soils in confined areas such as trenches, parking lots and foundations, etc.

Easy handling in every situationThe high speed, balanced design and hydraulic control system ensure easy, precise handling on the roughest of surfaces or for spot compaction. The handle features a vibration damping design to keep hand/arm vibrations down for increased operator comfort.

Sustainable valueExtra durable steel in the bottom plate, first-class com-ponents throughout, modern engines with low fuel consumption and emissions, self-cleaning design and pro-tection frames around the engine all ensure long-lasting machines with high trade-in values. At the end of the day, you get the job done with good results. And in the long run you get less maintenance, higher efficiency and a lower life cycle costs.

Co

mp

aC

tio

n

eq

uip

me

nt

19

20

Forward and reversible plate compactors LG160

Petrol

330 mm 450 mm

Net mass kg 153 160


Frequency Hz 80 80



Speed m/min 22 22




Dimensions



LxWxH mm 1143x330x1088 1143x450x1088

Engine

Model HondaGX160


Part number 3382 0000 15 3382 0000 14

Forward and reversible plate compactors

Applications:• Compacting medium to deep layers of

granular soils• Confined areas, such as trenches, parking

lots and foundations, etc. • Block paving

Advantages:• High compaction efficiency• Ergonomic and easy to operate• Durable• Long service life • Time saving


Co

mp

aC

tio

n

eq

uip

me

nt

21

LG160 LG200

Diesel Petrol Diesel

330 mm 450 mm Manual start Electric start

167 174 215 229 245

169 175 217 231 247

80 80 65 65 65

1,4 1,4 1,9 1,9 1,9

28 28 36 36 36

22 22 25 25 25

2,4 2,4 3,5 3,5 3,5

108 108 105 108 108

92 92 90 90 90

330 450 500 500 500

654 654 700 700 700

1143x330x1080 1143x450x1115 1315x500x1065 1355x500x1105 1355x500x1105

Hatz 1B20 Honda GX200 Hatz 1B20 Hatz 1B20

2,8 2,8 4,8 3,1 3,1

3382 0000 13 3382 0000 12 3382 0000 65 3382 0000 66 3382 0000 67

Features:• Hydraulic forward/reverse lever• Hardox 400 steel in bottom plate• Compaction indicator for LG400 (optional)• Reduced hand/arm vibrations due to design of vibra-

tion damping handle• Engines with low fuel consumption and emissions • Heavy-duty protection frame and impact resistant steel

covers protect engine and transmission.• Straps to secure the joints between bottom plate and

engine. Options:• Compaction indicator (LG400)• Extension plates• Block paving kits (LG 160-300 and LG500)• Hour meter (LG500 el and LH700)• Crank start kit (LG500)• Transport wheels (LG160-300)

22


Petrol

500 mm 600 mm

Net mass kg 263 268


Frequency Hz 68 68



Speed m/min 25 25




Dimensions



LxWxH mm 1385x500x1120 1385x600x1120

Engine

Model Honda GX270


Part number 3382 0000 39 3382 0000 41


Petrol

Net mass kg 396Operating mass kg 398

Frequency Hz 60

Amplitude mm 1,8

Centrifugal force kN 52

Speed m/min 25

H/A vibrations, standard handle m/s2 2,5

Sound power, guaranteed dB(A) 108

Sound pressure at operators ear dB(A) 93

Dimensions

Plate width mm 650

Plate length mm 967

LxWxH mm 1960x650x1150

Engine

Model Honda GX390


Part number 3382 0000 11

Part nr with Compaction Indicator



Co

mp

aC

tio

n

eq

uip

me

nt

23

LG300

Diesel

Manual start Electric start

500 mm 600 mm 500 mm 600 mm

280 285 300 305

282 287 302 307

68 68 68 68

1,7 1,7 1,7 1,7

40 40 40 40

25 25 25 25

1,7 1,7 1,7 1,7

108 108 108 108

94 94 94 94

500 600 500 600

768 768 768 768

1385x500x1120 1385x600x1120 1385x500x1120 1385x600x1120

Hatz 1B30

4,2

3382 0000 37 3382 0000 40 3382 0000 38 3382 0000 36

LG400 LG400 (EPA1)

Diesel DieselElectric start Electric start

434 434436 436

60 60

1,8 1,8

52 52

25 25

2,1 2,1

108

94,5

650 650

967 967

1960x650x1150 1960x650x1150

Lombardini 15 LD440 Lombardini 15 LD440

6,2 6,4

3382 0000 09 3382 0000 10

3382 0000 06 3382 0000 07

EPA = US Environmental Protection Agency

24

Forward and reversible plate compactors

LG500 Diesel LG500 DieselManual start Electric start

550 mm 750 mm 550 mm 750 mm

Net mass kg 487 502 507 522

Operating mass kg 490 505 510 525

Frequency Hz 60 60 60 60

Amplitude mm 2,1 2,1 2,1 2,1

Centrifugal force kN 60 60 60 60

Speed m/min 24 24 24 24

H/A vibrations, std handle m/s2 3,4 3,4 2,1 2,1

Sound power, guaranteed dB(A) 109 109 109 109Sound pressure at operators ear dB(A) 96 96 91 91

Dimensions

Plate width mm 550 750 550 750

Plate length mm 900 900 900 900

LxWxH mm1660x550

x12101660x750

x12101660x550

x12101660x750

x1210

Engine

Model Hatz Supra 1D81Z Hatz Supra 1D81Z

Rated power at 3600 rpm kW 8,2 8,2 8,2 8,2

Part number 3382 0000 54 3382 0000 57 3382 0000 55 3382 0000 56Part number with extra plate 2x75 3382 0000 63

Part number with extra plate 2x150 3382 0000 62


Forward and reversible plate compactors LH700 LH800

Diesel Diesel

Electric start Radio remote controlled

Net mass kg 777 817


Frequency Hz 53 53



Speed m/min 30 up to 30

H/A vibrations, standard handle m/s2 3,4 -



Dimensions



LxWxH mm 1880x660x1180 1150x660x795

Engine

Model Hatz 1D90V Hatz 1D90V


Part number 3382 0000 71 3382 0000 72

Co

mp

aC

tio

n

eq

uip

me

nt

25

Round plate compactor LX90

Net mass kg 95

Operating mass kg 96

Frequency Hz 75

Amplitude mm 1,7

Centrifugal force kN 16

Speed m/min 22

H/A vibrations, standard handle m/s2 6,1

Sound power, guaranteed dB(A) 104


Dimensions

Plate diameter mm 450

Height mm 920

Engine

Model HondaGX160



Round plate compactor

The LX90 vibratory com-pactor features a unique round base that allows flush compaction next to posts, pillars, guardrails, drainage inlets etc.


26

Applications:• Compacting thin layers of granular

soils, wet sand and asphalt. • Jobs in confined areas, parking lots, repair works etc.

Advantages:• High efficiency• Reliable• Long life• Easy to operate

Features:• Fully hydraulic• Large, removable water tank• Built-in oil cooler for increased lifetime of vital

components• Heavy-duty protection frame with single lifting

point for easy transportation• Minimum overhang and high curb clearance • Powerful engine for reliable operations.

Duplex roller

Net mass kg

Operating mass kg

Frequency Hz

Amplitude mm

Centrifugal force kN

Speed, forward/reverse km/h

H/A vibrations, standard handle m/s2

Sound power, guaranteed dB(A)

Sound pressure at operators ear dB(A)

Dimensions

Drum diameter mm

Drum width mm

LxWxH mm

Engine

Model

Rated power, at 2600 rpm kW

Part number

Duplex roller


Co

mp

aC

tio

n

eq

uip

me

nt

27

LP6500 LP750

Diesel Diesel

Manual start Electric start Manual start Electric start

658 678 953 979

696 716 993 1009

61 61 63 63

0,45 0,45 0,5 0,5

21 21 25 25

0-3,6/0-2,3 0-3,6/0-2,3 3,6 3,6

4,3 4,0 4,0 4,0

107 107 109 109

90 90 90 90

400 400 500 500

650 650 750 750

1100/2551x714x1045 1100/2551x714x1045 1372/2640x880x1283 1372/2640x880x1283

Hatz 1D50S Hatz Supra 1D81S

6,8 6,8 8,9 8,9

3382 0000 01 3382 0000 00 3382 0000 78 3382 0000 79

28

Trench compactor LP8504

Diesel

630 mm 850 mm

Net mass kg 1548 1650


Frequency Hz 32 32



Speed, working/transport m/min 21 39

H/A vibrations, standard handle

m/s2 - -


Sound pressure at operators ear

dB(A) - -

Dimensions

Drum diameter mm 535 630

Drum width mm 630 850

LxWxH mm 1875x630x1207 1875x850x1207

Engine

Model Hatz 2G40


Part number 3382 0000 81 3382 0000 80

Applications:• Compacting medium to

deep layers of cohesive and granular soils

• Jobs in confined areas such as trenches, con-struction back-fills and roads

Advantages:• Remote control

• Reliable and robust• Easy and safe for the

operator• Excellent traction

Features:• Bluetooth remote control• Oil cooler• Efficient drum pad design• No overhang

trench compactor

With its superior traction the LP8504 makes work on cohesive and granular soils easy, even if the work site is confined or packed with obstacles. The trench compactor is suitable for backfills, foundations, parking lots and similar applications.


Co

mp

aC

tio

n

eq

uip

me

nt

29

30

Machine Width Passes Speed Rockfill Gravel/Sand

mm m/min m 1) m3/h m 1) m3/h

LF50 320 4 25 0,2 24

LF60 350 4 26 0,2 27

LF75 420 4 27 0,2 34

LF75 500 4 24 0,2 36

LF80 420 4 34 0,2 43

LF100 500 4 25 0,2 37

LF130 500 4 22 0,25 41

LX90 450 4 20 0,25 35

LG160 450 4 22 0,3 45

LG200 500 4 22 0,3 50

LG300 500 4 22 0,35 60

LG400 650 4 25 0,6 146 0,4 98

LG500 750 4 22 0,6 150 0,4 100

LH700 660 4 30 0,8 240 0,45 130

LH800 660 4 25 0,8 200 0,45 110

LT5004 230 4 15 0,4 20

LT6004 280 4 15 0,4 25

LT7000 280 4 15 0,4 25

LT800 280 4 15 0,4 25

LP6500 650 8 50 0,15 35

LP750 750 8 60 0,2 70

LP8504 850 8 40 0,4 100

Compaction capacity on asphalt

Compaction capacity on soil

Machine Width Speed Surface capacity

mm m/min m2/h

Passes

2 4

LF75 420 27 240 120

LF75 500 24 252 126

LF80 420 34 300 150

LF100 500 25 262 131

Efficiency factor 0,7.

1) Max recommended layer thicknessEfficiency factor 1,0. Multiply the capacity above with your efficiency factor, within 0-1,0.

Co

mp

aC

tio

n

eq

uip

me

nt

31

Silt Clay Subbase Base

m 1) m3/h m 1) m3/h m 1) m3/h m 1) m3/h

0,1 12 0,1 12 0,1 12

0,1 14 0,1 14 0,1 14

0,1 17 0,15 25 0,1 17

0,1 18 0,1 18 0,1 18

0,1 21 0,15 32 0,1 21

0,1 19 0,15 28 0,1 19

0,15 25 0,15 25 0,15 25

0,15 20 0,2 25 0,15 20

0,2 30 0,2 30 0,2 30

0,2 35 0,2 35 0,2 35

0,2 35 0,25 40 0,2 35

0,25 60 0,3 73 0,25 60

0,3 75 0,3 75 0,25 60

0,3 90 0,35 100 0,3 90

0,3 75 0,35 85 0,3 75

0,3 15 0,2 10 0,35 20 0,3 15

0,3 20 0,2 15 0,35 20 0,3 20

0,3 20 0,2 15 0,35 20 0,3 20

0,3 20 0,2 15 0,35 20 0,3 20

0,2 50 0,15 35

0,2 70 0,2 70

0,3 75 0,1 25 0,3 75 0,25 65

Machine Width Speed Surface capacity

mm m/min m2/hPasses

2 4 6

LP6500 650 50 375 250 200

LP750 750 60 475 325 240

32

Pokers

Good vibrations at your serviceAtlas Copco offers efficient and reliable high quality pokers with long service life. The high speed, rapid accel-eration and high amplitude of our pokers will help you increase productivity.

Plenty of reasons to go electricThe high power, stable speed and high centrifugal force of our electronic and electric pokers provide a wide radius of action and rapid acceleration to effectively remove air voids from the concrete. There are also other efficiency gains, like the absence of startup time when using the Smart series of pokers with built-in frequency convert-ers – just plug one into a regular wall socket and start working – or the fact that one frequency converter can run up to four pokers. It is also much easier to extend a cable than a flexible shaft. The electric motor-in-head solution helps keep vibrations where they belong – in the concrete rather than your hands and arms, making the electric poker your efficient and user-friendly option.

Mechanical pokers – Quality components, robust designAssembled from high-quality components such as induction-hardened magnesium steel alloy in the major wearing parts and steel reinforcement in the rubber hose. To keep up speed and prevent rpm-losses the pendulum raceway has a conical shape for better friction within the poker head. The simple design makes service easy and inexpensive. Available with a selection of drive units to suit most work sites.

Pneumatic Pokers – Clean and cool in all sizesAn economical alternative, especially if an air compressor is already at the work site. Few moving parts means long service life and reduced hand/arm vibration. Highly resist-ant pre-treated tubes ensure long life. Excellent for walls and columns since the series is air-cooled.

33

co

nc

re

te

e

qu

iPm

en

t

34

SMART SMART40 SMART48 SMART56 SMART65

Tube diameter mm 40 48 56 65

Tube length mm 320 350 380 410

Hose length m 5 5 5 5

Vibration value m/s2 3,7 4,33 4,47 4,24

Noise level dB(A) 78 76 79 79

Part number

230V-1-50/60Hz 4812 0508 52 4812 0508 53 4812 0508 54 4812 0508 55

110V-1-50/60Hz UK 4812 0508 56 4812 0508 57 4812 0508 58

110V-1-50/60Hz Canada 4812 0508 59 4812 0508 60 4812 0508 61

Electronic PokersSMART

All SMART pokers

Cable length m 15

Frequency vpm 12000

Primary voltage (V)±10% V/Hz 230-1-50/60 or 110-1-50/60

Converter dimensions LxWxH 300x100x80

electronic pokers

Thanks to the built-in frequency converter all you need to start working is a regular wall socket. The design with the electric motor placed in the poker head gives outstanding performance with high power and stable speed.

Features:• Cable in the hose• 20 m reach around the plug• High protection level


35

co

nc

re

te

e

qu

iPm

en

t

SMART SMART E28 SMART E40 SMART E48 SMART E56

Tube diameter mm 28/40 40 48 56

Tube length mm 239/211 320 350 380

Hose length m 0,5 0,5 0,5 0,5



Part number

230V-1-50/60Hz 4812 0508 62 4812 0508 63 4812 0508 64 4812 0508 65

All SMART-E pokers

Cable length m 15

Frequency vpm 12000

Primary voltage (V)±10% V/Hz 230-1-50/60

Converter dimensions LxWxH 300x100x80

Electronic PokersSMART-EDevibrated handle


36

electric pokers

Designed to handle low slump concrete the AN series of electric pokers features massive centrifugal force and amplitude. Radius of action is 10 times the poker diam-eter. For medium to high slump concrete the AX series is a good alternative.

Features:• Thermo switches• 20 m reach around the plug• Low voltage 42V-3-200Hz

AN Pokers AN40 AN48 AN56 AN65 AN90

Tube diameter mm 40 48 56 65 90

Tube length mm 320 350 380 410 566

Tube weight kg 2,3 4,2 5,2 7,9 18

Ampere at 42V A 5 11 13,5 21 21

Vibration value m/s2 3,7 4,33 4,47 4,24 5

Noise level dB(A) 78 76 79 79 76

Part number 4812 0508 454812 0508 464812 0508 474812 0508 484812 0508 79

All AN pokers

Cable length m 15

Frequency vpm 12000

Voltage V/Hz 42-3-200

AN PokersElectric PokerVibrators


37

co

nc

re

te

e

qu

iPm

en

t

AN-E Pokers AN28E AN40E AN48E AN56E

Tube diameter mm 28/40 40 48 56

Tube length mm 239/211 320 350 380

Tube weight kg 2,4 2,1 4,1 5,1

Hose length m 0,5 0,5 0,5 0,5

Cable length m 15 15 15 15

Frequency vpm 12000 12000 12000 12000

Voltage V/Hz 42-3-200 42-3-200 42-3-200 42-3-200

Ampere at 42V A 4 5 11 13,7



Part number 4812 0508 44 4812 0508 93 4812 0508 94 4812 0508 95

AN-E PokersElectric Poker VibratorsDevibrated handle

AX Pokers AX36 AX40 AX48 AX56 AX65


Tube length mm 322 320 350 380 410

Tube weight m 2,1 2,1 4,1 5,1 7,7

Cable length m 10 10 10 10 10

Voltage V/Hz 42-3-200 42-3-200 42-3-200 42-3-200 42-3-200

Frequency vpm 12000 12000 12000 12000 12000

Ampere at 42V A 6,2 4,5 10 11,7 19

Vibration value m/s2 3,9 3,5 2,26 4,38 4,11

Noise level dB(A) 70 78 76 79 79

Part number 4812 0508 27 4812 0508 28 4812 0508 29 4812 0508 30 4812 0508 31

AX PokersElectric Poker Vibrators



38

AXE Pokers AX40E AX48E AX56E

Tube diameter mm 40 48 56

Tube length mm 320 350 380

Tube weight m 2,1 4,1 5,1

Frequency vpm 12000 12000 12000

Ampere at 42V A 4,5 10 11,5

Vibration value m/s2 0,51 0,61 0,96

Noise level dB(A) 78 76 79

Part number 4812 0508 40 4812 0508 41 4812 0508 42

AXE PokersElectric Poker VibratorsDevibrated handles

AXP PokersAXAU PokersElectric Poker Vibrators Paver (P) and Slipring (AU) versions

AX-C Pokers AX36C AX40C AX48C AX56C



Tube weight m 2,1 2,1 4,1 5,1

Frequency vpm 12000 12000 12000 12000

Voltage V 42V-3-200 Hz 42V-3-200 Hz 42V-3-200 Hz 42V-3-200 Hz

Ampere at 42V A 6,2 4,5 10 11,7



Part number

Cane 500 mm 4812 0508 32 4812 0508 33 4812 0508 34 4812 0508 35

Cane 1000 mm 4812 0508 36 4812 0508 37 4812 0508 38 4812 0508 39

AX-C PokersElectric Poker VibratorsRigid cane

AXP/AXAU Pokers AX65P AX48AU

Tube diameter mm 65 52

Tube length mm 410 350

Tube weight m 7,7 4,1

Frequency vpm 12000 12000

Voltage V 42V-3-200 Hz 42V-3-200 Hz

Ampere at 42V A 19 10

Noise level dB(A) 79 76

Part number 4812 0508 43 4812 0508 80


39

co

nc

re

te

e

qu

iPm

en

t

Vibrastar pokers

Reliable and robust poker designed for medium to high slump concrete. To save you both time and money the Vibrastar is as efficient when it comes to concrete vibration as it is on energy consumption.

Features:• No need of compressor• Easy to handle switch box• Low voltage 42V-3-200Hz

Vibrastar Pokers Vibrastar 40 Vibrastar 50 Vibrastar 60

Tube diameter mm 40 48 60

Tube length mm 255 284 330

Tube weight m 1,84 3,06 5,1

Frequency vpm 12000 12000 12000

Ampere at 42V A 4 8 11

Vibration value m/s2 1,8 3,28 3,23


Part number 4812 0508 49 4812 0508 50 4812 0508 51

Vibrastar PokersElectric Poker VibratorsDevibrated handles


40

Frequency convertersThe electric frequency converter can supply several pokers with power at the same time. No fumes, less noise and low weight are other appreci-ated properties, as well as the stable power output without any variation.

Features:• Stable frequency and speed• Up to four outlets• Low weight

Frequency Converters CF11 CF25 CF67

Power kVA 0,8 1,8 4,7

Output intensity av 42 V A 11 25 67

Number of phases (primary voltage)

1 1/3 3

Number of outlets 1 2 4

Weight kg 18 31 70

Protection index IP55 IP55 IP55


Part number

230V-1-50Hz 4812 0503 95 4812 0503 94 -

400V-3-50Hz - 4812 0503 93 4812 0510 51

440V-3-50Hz - 4812 0504 74 4812 0510 52

380V-3-60Hz - 4812 0510 80 4812 0510 78

400V-3-50Hz C14P - - 4812 0510 53

440V-3-50Hz C14P - - 4812 0510 54

380V-3-60Hz C14P - - 4812 0510 79

41

co

nc

re

te

e

qu

iPm

en

t

AT Pokers AT29 AT39 AT49 AT59




Frequency vpm 12000 12000 12000 12000



Part number 4812 0508 05 4812 0508 06 4812 0508 07 4812 0508 08

Drive units Racoon

Energy Electric

Input hp 2

Speed rpm 12000

Weight kg 5

Vibration value m/s2 2,5

Noise level dB(A) 84,5

Part number

110V-1-50/60 Hz CSA 4812 0508 71

110V-1-50/60 Hz UK 4812 0508 70

230V-1-50/60 Hz 4812 0508 69

Flexible shafts

Superflex 10

Superflex 15

Superflex 20

Superflex 30

Superflex 40

Length m 1,0 1,5 2,0 3,0 4,0

Part number 4812 0508 13 4812 0508 14 4812 0508 15 4812 0508 16 4812 0508 17

racoon pokers

Extremely versatile vibration system with one ”carry-on” two horsepower electric drive unit to be combined with 4 poker heads and 5 flexible shafts.

Features:• High speed• High power• Flexible shafts


42

mechanical pokers

Reliable, easy-to-use and very versatile pokers. Available with a wide selection of drive units to suit most working sites. The product is built up with high quality compo-nents. The simple design makes service easy and afford-able.

Features:• Conical shaped pendulum raceway• High speed• Long hose• Simple design – easy to dismantle

AA Pokers AA27 AA37 AA47 AA67 AA77


Tube length mm 335 385 440 480 500

Tube weight kg 0,9 2,1 4,0 6,8 9,0

Frequency vpm 12000 12000 11200 10500 9200


Noise level dB(A) 69 68 73 75,8 75,7

Part number 4812 0508 00 4812 0508 01 4812 0508 02 4812 0508 03 4812 0508 04

AZ Pokers AZ26 AZ36 AZ46 AZ56




Frequency vpm 12000 12000 12000 11300


Noise level dB(A) 77,50 82,00 87,4 90,00

Part number 4812 0508 09 4812 0508 10 4812 0508 11 4812 0508 12


43

co

nc

re

te

e

qu

iPm

en

t

Drive unitsAM15,

LombardiniAM18, Honda

AF21 AG21

Energy Diesel Petrol Electric Electric

Power kW 3,0 3,2 1,3 1,1

Speed rpm 2900 2900 2850 2850

Vibration value kg 46 23 18,5 21

Noise level dB(A) 79 72,8 72,5 74,5

Part number 4812050875 4812050876 - -

110V-1-50/60Hz - - - 4812050868

230V-1-50/60Hz - - - 4812050867

230/400V-3-50/60Hz - - 4812050866


Drive units

Atlas Copco offers a wide range of drive units with gaso-line, diesel and electric options. Electric motors feature strong casings, great internal shock absorption and built in flywheel to prevent the three-phase motors from run-ning in the wrong direction.

Features:• Low fuel consumption• Strong casings

44

Pneumatic pokers

An environmentally friendly and economical alternative if an air compressor is already at the work site. Few moving parts for long service life.

Features:• No moving parts in the hose• Cooled by the compressed air.• One compressor can drive several pokers.

AY Pokers AY27 AY37 AY47 AY57




Frequency vpm 12000 12000 12000 12000


Noise level dB(A) 84,5 89,2 95,8 95,0

Part number

Hose length 2 m 4812 0508 18 4812 0508 19 4812 0508 20 4812 0508 21

Hose length 4 m 4812 0508 81 4812 0508 83 4812 0508 85 4812 0508 87

Hose length 6 m 4812 0508 82 4812 0508 84 4812 0508 86 4812 0508 88


45

co

nc

re

te

e

qu

iPm

en

t

AY Pokers AY67 AY77 AY87 AY107 AY157


Tube length mm 365 398 410 415 430

Tube weight kg 7,9 8,9 9,7 17,7 28

Frequency vpm 12000 12000 12000 12000 12000

Hose length m - - 1,5 1,5 0,8


Noise level dB(A) 98,0 98,0 94,0 96,3 92,4

Part number 4812 0508 24 4812 0508 25 4812 0508 26

2 m 4812 0508 22 4812 0508 23

4 m 4812 0508 89 4812 0508 91

6 m 4812 0508 90 4812 0508 92


46

external vibrators

To meet your external vibration requirements Atlas Copco offers a wide range of vibrators, from high speed pneumatic to normal frequency electric – all with adjustable centrifugal force. In addition to reliable equipment we also provide our customers with more than 50 years of experience from this field.

Cost effectiveGood concrete vibration and excellent results thanks to flexible, high centrifugal force. In order to increase flexibility and cost efficiency, ER207B, ER407B and ER507B vibrators are mounted on quick release brackets for easy portability, thus fewer units are required. High-end components and materials keep life cycle and maintenance costs down.

47

co

nc

re

te

e

qu

iPm

en

t

Length 5 m 10 m 15 m 20 m

Part number 4700 1814 13 4700 1814 14 4700 1814 15 4700 1814 16

ERElectric External VibratorsHigh speed 6000 rpm

ER207B ER407B ER507B

Max centrifugal force N 7 400 11000 16000 N

Voltage Hz 42V-3-200 42V-3-200 2) 42V-3-200

Intensity A 12,5 16,5 23,5

Weight kg 10,5 15,5 23,2

Bracket attachment VT2 VT4 VT4

Noise level dB(A) 69 84,5 85

Part number

42V-3-200Hz 4812 0509 80 4812 0509 81 4812 0509 82

250V-3-200Hz 4812 0509 84

Bracket 4700 1025 69 4700 1019 70 4700 1019 70


1) varies between the different models2) 250 V available upon request

To cover your need of external vibration Atlas Copco offer a wide range of equipment, from high speed pneumatic to normal frequency electric vibrators – all with adjustable centrifugal force.

Features:1)

• Integrated noise reducer• Adjustable bracket mounting• Adjustable centrifugal force

Extension cord tableFor ER (6000 rpm) and Pokers (AX/AN/Vibrastar)

48

ERElectric External VibratorsNormal speed 3000 rpm

ER105 ER205 ER305 ER405

Max centrifugal force N 500 1400 3000 6000

Intensity at 230/400V A 0,16/0,09 0,3/0,18 0,7/0,4 1,8/1,09

Weight kg 2,7 4,3 11 20


Part number 4812 0509 10 4812 0509 20 4812 0509 30 4812 0509 40

Bracket 4700 1857 71

ER505 ER605 ER705

Max centrifugal force N 8000 12000 N 16000 N

Intensity at 230/400V () A 2,2/1,3 3,3/1,9 4,2/2,5

Weight kg 22 44,6 kg 46,8 kg

Noise level dB(A) 57 61 dB(A) 63 dB(A)

Part number 4812 0509 50 4812 0509 60 4812 0509 70

Bracket 4700 4857 71

EPPneumatic Vibrators, High speed

EP121B EP271B EP371B EP601B

Speed rpm 9000 9350 rpm 9350 rpm 8800 rpm

Max centrifugal force N 8100 10350 N 26800 N 31500 N

Air consumption l/min 1200 1200 l/min 1400 l/min 1400 l/min

Weight kg 9,5 10 kg 16,5 kg 18 kg

Bracket attachment VT2 VT2 VT4 VT4

Noise level dB(A) 90 90,8 dB(A) 95 dB(A) 100 dB(A)

Part number 4812 0509 86 4812 0509 87 4812 0509 88 4812 0509 89

Bracket 4700 1025 69 4700 1025 69 4700 1019 70 4700 1019 70


Standard Voltage 230/400V-3-50 Hz. Other voltages upon request.


49

co

nc

re

te

e

qu

iPm

en

t

EB41, at 2 bar – 29 psi 6 bar - 87 psi 4 bar – 60 psi

Speed rpm 5000 6500 7000

Centrifugal force N 2332 4004 4620

Air consumption l/min 420 560 728


Part number 4700 3652 91 4700 3652 91 4700 3652 91

EB25, at 2 bar – 29 psi 4 bar – 60 psi 6 bar – 87 psi

Speed rpm 10000 11000 11900

Centrifugal force N 1 628 1 980 2 376



Part number 4700 3652 89 4700 3652 89 4700 3652 89

EB10, at 2 bar – 29 psi 4 bar – 60 psi

Speed rpm 20000 22000

Centrifugal force N 228 273

Air consumption l/min 112 168


Part number 4700 3652 86 4700 3652 86


Speed rpm 7600 8200 8800

Centrifugal force N 2596 3080 3564



Part number 4700 3652 90 4700 3652 90 4700 3652 90


Speed rpm 11000 13000 14000

Centrifugal force N 1 232 1 716 1 980



Part number 4700 3652 88 4700 3652 88 4700 3652 88

EBBall Vibrators

EB13, at 2 bar – 29 psi 4 bar – 60 psi

Speed rpm 16000 18000

Centrifugal force N 303 383

Air consumption l/min 112 168


Part number 4700 3652 87 4700 3652 87

50

The easy way to a smooth surfaceThe Atlas Copco screed range features reliable equipment for surface leveling and vibration – from single beam screeds with working widths of two meters to modular screeds that can cover 25-meter bridges or runways. User-friendly designs and smart solutions that protect vital parts make for appreciated long life products.

Great resultOur single beam screeds are very effective and easy to use thanks to low weight and ergonomic features such as a telescopic handle that allows the operator to work from outside the slab. We also offer double beam screeds with powerful in-depth action, lightweight aluminum design for ease of handling and excellent balance for level floors. For the really big challenges, such as floors up to 25 meters wide we have the robust, yet flexible, modular screeds that are easily assembled by a single operator. The BT90 provides really deep vibration effect. Thanks to the heavy steel frame it can remove air voids down to a depth of 20 cm.

Screeds

51

co

nc

re

te

e

qu

iPm

en

t

52

Single beam screeds

Finishing beams is one of the most convenient ways to treat wet concrete surface. Our models are stable, reliable and easy-to-use. Available with electric or petrol driven vibration unit and in an manual version without vibration unit.

Features:• Lightweight aluminium design• Rigid screed blade• Easy to clean

Single beams BV20E BV20G BV20HBV20H

ext. tube

Working width m 2,0 2,0 2,0 -

Weight operating kg 18 14,8 7,4 1,5

Length handle m 1,8+1,8 1,8+1,8 1,8+1,8 1,8

Energy Electric Petrol Manual -

Motor230V-1-50/60

Hz4-stroke

Honda GX25- -

Power kW (hp) 0,270,7 (1,0)

at 7000 rpm- -

Vibration frequency Hz 166 up to 166 - -

Centrifugal force N 2000 max 1100 - -

Vibration value m/s2 - 3,2 - -

Noise level dB(A) - 91 - -

Part number 4812 0511 49 4812 0511 51 4812 0511 54 4700 0022 59

BV20Single beam screeds


53

co

nc

re

te

e

qu

iPm

en

t


BV30 Drive Unit

Weigh, drive unit kg 13,5

Vibrating unit 1) 4-stroke Honda GX35

Power kW (hp) 1,2 (1,6) at 7000 rpm

Vibration frequency Hz up to 166

Centrifugal force N max 3 460

Vibration value m/s2 3,25

Noise level dB(A) 108

Part number without blade

4812 0510 05

BV30Single beam screed

Screed blade 1,8 m 2,4 m 3,0 m 3,6 m 4,2 m

Working width m 1,82 2,44 3,05 3,66 4,26

Weight incl drive unit

kg 6,5 8 9,6 11,2 12,8

Part number D604 0329 58 D604 0329 59 D604 0329 18 D604 0329 60 D604 0329 61

1) The driving unit is delivered without screed blades which needs to be ordered separately

54

Double beam screeds

Powerful in-depth action, lightweight aluminium design for easy handling and excellent balance for even floors. Smooth surfaces allow the concrete to come of easily when cleaning.

Features:• Turnable drive unit• Made of non-corrosive aluminium• Adjustable tensioning rods• Easy to clean• Quick clamping for rapid change of vibrating unit

BD Double vibrating beams BD32 BD42 BD52 BD62

Height of profile mm 100 100 100 100

Width between profiles mm 300 300 300 300

Length m 3,2 4,2 5,2 6,2

Part number 4812 0508 99 4812 0509 00 4812 0509 01 4812 0509 02

BD Vibrating Units BE20 BE20 BE20 BE200

Type Electric Electric Electric Electric

Voltage/Engine Type 400V-3-50HZ 440V-3-50HZ 380V-3-60HZ 400V-3-50HZ

Power input kW 0,45 0,45 0,45 0,45

Weight kg 19 19 19 19

Suitable for beam BD32 – BD62 BD32 – BD62 BD32 – BD62 BD520 – BD800


Vibration value 2) m/s2 2,5 2,5 2,5 2,5

Part number 4812 0508 96 4812 0511 18 4812 0511 17 4812 0508 97

Accessories for BD beams Outrigger Outrigger with lifting device

Type U 2 U 3

Suitable for beam All BD beams All BD beams

Part number 4700 0211 45 4700 0112 24

2) Vibration value measured at the rope handle which is connected via a rope to the beam. Vibration value at the fixed beam handle is 25m/s2

1) Two sections for easier transportation

BDDouble beam screeds

55

co

nc

re

te

e

qu

iPm

en

t

BD520 BD620 BD720 BD800 BD802 1) BD842 1) BD942 1)

150 150 150 150 150 150 150

300 300 300 300 300 300 300

5,2 6,2 7,2 8,0 8,0 (2 x 4m) 8,4 (2 x 4,2m) 9,4 (2 x 4,7m)

4812 0509 03 4812 0509 04 4812 0509 05 4812 0509 06 4812 0509 07 4812 0509 08 4812 0509 09

BE200 BE200 BE202 BE202 BE202 BE30 GX120

Electric Electric Electric Electric Electric Petrol

440V-3-50HZ 380V-3-60HZ 400V-3-50HZ 440V-3-50HZ 380V-3-60HZHonda GX 120

4-stroke

0,45 0,45 0,45 0,45 0,452,3 (3,5 Hp)

(output power)

19 19 19 19 19 35

BD520 – BD800 BD520 – BD800 BD802 – BD942 BD802 – BD942 BD802 – BD942 BD32 – BD720

94 94 94 94 94 94

2,5 2,5 2,5 2,5 2,5 3

4812 0511 20 4812 0511 19 4812 0508 98 4812 0511 22 4812 0511 21 4812 0510 04

Skate (complete set) Skate (complete set)

SKT SKT

BD32 – BD62 BD520 – BD942

4700 8005 15 4700 0223 64


56

modular screeds

With big challenges ahead, like up to 25 meter wide floors, runways or bridges that need compaction, levelling and finishing the BT90 is a very effective partner.

A robust modular construction with rigid triangular shaped sections and great protection of vital parts ensures long lifetime and easy service. No special tools needed for assembly.

Features:• Screeds sections in different lengths• Electric, pneumatic or petrol driven• Easy cleaning

Drive sectionElectric

Drive sectionPetrol

Drive sectionPneumatic

Length mm 720 720 278

Width mm 535 620 585

Height mm 980 980 970

Frequency rpm 2865 2900 -

Input kW 3 5,5 -

Powered by 400V-3-50 Hz Honda GX 270 Compressor

Part number 4812 0509 95 4812 0509 96 4812 0509 94

BT90Modular Screed – Drive section 1)

Screed sections, 1 m section



Length mm 1095 2095 3095

Width mm 420 420 420

Height mm 376 376 376

Part number

Pneumatic 4812 0509 98 4812 0510 00 4812 0510 02

Electric/Petrol 4812 0509 97 4812 0509 99 4812 0510 01

BT90Modular Screed – Screed section

1) Opposite-end section is delivered with the drive sections.

57

co

nc

re

te

e

qu

iPm

en

t

0,5 m extension

Outrigger (with rollers)

Crown Invert bracket (only for pneumatic

sections)

Skate (complete set with adaptor)

Length mm 500 372 - -

Width mm 420 300 - -

Height mm 421 300

Part number 4812 0510 03 4812 0510 49 4812 0510 50 4812 0511 83

BT90Accessories

58

Formwork rails

The Combiform Screed rail is a leave-in-place rail and stopper made out of metal with a removable plastic strip on top for the screed to slide on.

Screed rail is an easier way to level concrete floor with less filling work.

Features: • Different length screeds • Plastic adjustment screws • Lightweight

Track rail system for BT90 and BD double beams

Model Adjustable Rail Support Tripod 270 mm

Type F 2 FR 270*

Part number 4700 0443 66 4700 0325 10

CombiForm

Model CombiForm, 25 mm 1) CombiForm, 45 mm 1) CombiForm, 65 mm 1)

Type C 25 C 45 C 65

Length m 3,5 3,5 3,5

Height mm 25 45 65

H-1 mm - 30 28

H-2 mm - - 47

H-3 mm - -

Width mm 80 90 105

Weight kg/m 0,80 0,85 1,10

Part number 4700 0021 36 4700 0019 72 4700 0019 91

Elevating strip

Ground plate

Screw, 25 mm

Screw, 60 mm

Screw, 90 mm

Type Box of 100 pc Box of 100 pc Box of 100 pc

Length mm 3,5

Height mm 30

Width mm 8

Part number 4700 0022 08 4700 0020 01 4700 0022 06 4700 0020 00 4700 0022 07

1) Note! Combiform must be ordered in multiples of 35 units. example; 35, 70, 105 etc

*) Use with F2

Locking Clip C-45 Locking clip C-65 Locking clip C-85

4700 0028 09 4700 0028 10 4700 0028 11

59

co

nc

re

te

e

qu

iPm

en

t

Support Tube, Dia 35 mm, in 6 m length

Track Rail 100x50x3 mm, L= 6 m

TB 35* Rail

4700 0007 22 4700 0006 56

CombiForm, 85 mm 1) CombiForm, 105 mm 1) CombiForm, 125 mm 1) CombiForm, 145 mm 1)

C 85 C 105 C 125 C 145

3,5 3,5 3,5 3,5

85 105 125 145

31 32 32 32

49 53 64 75

67 88 109 127

115 130 135 160

1,25 1,55 1,90 2,20

4700 0019 73 4700 0019 74 4700 0019 75 4700 0019 76

Adjustment tool, 440 mm

Adjustment tool, 1300 mm

Levelling stickAdj. tool

Drill adaptor

4700 0020 28 4700 0020 27 4700 0020 29 3382 0106 42

Locking clip C-105 Locking clip C-125 Locking clip C-145

4700 0028 12 4700 0028 13 4700 0028 14

60

Efficiency on all jobsThe Atlas Copco range of trowels covers all kind of jobs from large industrial floors to small confined spaces. Ergonomic solutions and good safety features are included in the offer. To make the deal even better all products are highly reliable. The gearboxes on our trowels have two-year warranties for instance.

If you’re looking for high capacity and great handling control the BG370 and BG470 is the right choice. On the BG Combi two interchangeable protection rings – 850 and 1020 mm – and spring lock blade fastening, makes switching machine trowel diameters between 850, 915 and 1020 mm quick and easy. The smaller BG240, 600 mm diameter, features a cast rotating protection ring with rubber edges for easy access close to walls and other obstacles.

Operator friendly designWe work hard to make handling, transportation and main-tenance as user-friendly and safe as possible. The belt clutch on our petrol-driven trowels is a good example. It resolves two important issues – variable speed and the immediate halt of the rotating blades in the case of a loss of control – simply by using a V-belt and a worm gear. Adjustable and foldable handles, reduced hand and arm vibration, user friendly assembled controls and smooth handling are other appreciated features.

trowels

61

co

nc

re

te

e

qu

iPm

en

t

62

edger trowels

Small jobs can be as challenging as big ones. The BG240 trowel is developed to assist in those confined, hard to work in, areas. With its diameter of just 600 mm and a casted rotating protection ring with rubber edges it’s perfect for those hard to reach places such as close to walls or other obstacles.

Features:• Safety belt-clutch with direct stop• Variable speed on petrol models• Adjustable handle• Quick release blades available• Rotating protection ring• Easy to clean

Edger trowels BG240

Protection ring diameter mm 615

Operating weight kg 59

Blade diameter mm 600

Disc diameter mm 610

Floating blade diamter mm -

Blade speed rpm 40-115

Number of blades 4

Type of handle Short foldable

Pitch control Twist-Pitch

Engine Honda GX120 (4-stroke)

Power kW (hp) 2,9 (4,0)

Fuel Petrol

Fuel tank capacity l 2,5

Lifting hook Standard

Transport wheels Accessory

Blade arm type Bolt-on

Vibration value m/s2

Noice level dB(A)

Model code H4-S-TP


BG240 Power TrowelsWalk-behind trowels, Petrol and electric versions


63

co

nc

re

te

e

qu

iPm

en

t

BG240 BG240 BG240

615 615 615

59 59 59

600 600 600

610 610 610

- - -

40-115 120 120

4 4 4

Short foldable Short foldable Short foldable

Quick-Pitch Twist-Pitch Quick-Pitch

Honda GX120 (4-stroke) 230V-1-50/60Hz 230V-1-50/60Hz

2,9 (4,0) 1,5 (input) 1,5 (input)

Petrol - -

2,5 - -

Standard Standard Standard

Accessory Accessory Accessory

Bolt-on Bolt-on Bolt-on

H4-S-QP E-S-TP E-S-QP

3382 0001 00 3382 0001 01 3382 0001 02

64

Power trowels

BG370 and BG470 forms a dynamic series of high capacity trowels with trowel diameters from 900 to 1200 mm, power output from 5,5 to 9 hp and two different handle lengths.

Features:• Safety belt-clutch with direct stop• Variable speed on petrol models• Adjustable handle• Quick release blades available• Easy to clean

Power trowels BG370 BG370

Protection ring diameter mm 950 950

Operating weight kg 88 89

Blade diameter mm 900 900

Disc diameter mm 945 945

Floating blade diamter mm 945 945

Blade speed rpm 40-115 40-115

Number of blades 4 4

Type of handle Short Short

Pitch control Twist-Pitch Twist-Pitch

Engine Honda GX160 (4-stroke) Honda GX200 (4-stroke)

Power kW (hp) 4,1 (5,5) 4,8 (6,5)

Fuel Petrol Petrol

Fuel tank capacity l 3,1 3,1

Lifting hook Standard Standard

Transport wheels Accessory Accessory

Blade arm type Quick release / Bolt-on Quick release / Bolt-on

Model code H5-S-TP H6-S-TP

Part number 3382 0001 03 3382 0001 05

BG370 / BG470 Power TrowelsWalk-behind trowels, Petrol versions


65

co

nc

re

te

e

qu

iPm

en

t

BG370 BG370 BG470

950 950 1200

93 102 105

900 900 1140

945 945 -

945 945 1160

40-115 450-115 40-115

4 4 4

Long Long Long

Twist-Pitch Twist-Pitch Twist-Pitch

Honda GX200 (4-stroke) Honda GX270 (4-stroke) Honda GX270 (4-stroke)

4,8 (6,5) 6,6 (9,0) 6,6 (9,0)

Petrol Petrol Petrol

3,1 5,3 5,3

Standard Standard Standard

Accessory Accessory Accessory

Quick release / Bolt-on Quick release / Bolt-on Bolt-on

H6-L-TP H9-L-TP H9-L-TP

3382 0001 06 3382 0001 07 3382 0001 10

66

combi trowels

User-friendly and effective electrically driven machine for demanding indus-trial floor work. Two interchangeable protection rings, 850 and 1020 mm, with steel wire net for perfect look trough and spring lock fastening of the blades makes it fast and easy to change trowel diameter between 850, 915 and 1020 mm in the same machine.

Features:• Adjustable handle• Easy cleaning• Built in carrying handle• Transport wheels standard• Two speed selection

Combi trowels BGCombi BGCombi

Protection ring diameter mm 850 1020

Operating weight kg 88 90

Blade diameter mm 850 850/915/980

Disc diameter mm 865 865/965/1015

Floating blade diameter mm - -

Blade speed rpm 60/120 60/120

Number of blades 4 4

Type of handle Long Long

Pitch control Twist-Pitch Twist-Pitch

Engine 400V-3-50/60Hz 400V-3-50/60Hz

Low/High speed input power kW (hp) 1,6 (2,4) 1,6 (2,4)

Lifting hook Standard Standard

Transport wheels Standard Standard

Blade arm type Quick release Quick release

Vibration value m/s2 3,6 3,6

Sound power, guaranteed Lwa dB(A) 94 94

Sound pressure at operators ear LpA dB(A) 77 77

Model code E-L-TP E-L-TP

Part number 3382 0001 08 3382 0001 09

BGCombi Power TrowelsSingle hand-guided trowels, Electric versions


67

co

nc

re

te

e

qu

iPm

en

t

Model ORKA 350/450 ORKA 350/450D

Standard disc size mm 350 or 450 350 or 450

Max. cutting depth mm 175 175

Engine Honda GX390 QXC4 Lombardini 15 LD 350

Fuel Petrol Diesel

Power kW (hp) 9,6 (13) 5,1 (7)

Water tank capacity l 30 30

Weight kg 98 108

Vibration value ms2 9,8 9,8

Noice level dB(A) 113 115

Part number 4812 0510 07 4812 0510 08

orKA concrete and Asphalt floor saws

Orka is a very operator friendly floor saw with all major controls – such as on/off switch, throttle control and in depth control placed together for easy use.

Features:• Large water tank• Two disc sizes possible• Easy service and cleaning

Type 350A 450F


Pcs/pack 5 1

Blade type For asphalt For fresh concrete

Part number 4700 3685 92 4700 3685 95

Type 450C 450A


Pcs/pack 1 1

Blade type For old concrete For asphalt

Part number 4700 3685 87 4700 3685 88

Diamond disks for floor saws

Type 350F 350C


Pcs/pack 5 5

Blade type For fresh concrete For old concrete

Part number 4700 3685 94 4700 3685 93


68

Handheld pneumatics

Solid Body conceptThe one-piece machine body means fewer parts helping to increase reliability. The concept also gives a low centre of gravity to our breakers and thus a good balance of the product.

HAPS™ systemBy reducing the in-use vibration value of the machine, Atlas Copco’s HAPS™ system helps to decrease the negative effects of harmful vibration at a given trigger time.

Highly efficient silencerThe wear-resistant polyurethane silencer cuts the noise emission by up to 75% (as compared to the same machine without noise reduction, ISO 2000/14/EC).

SOFSTART™ triggerThe two-step trigger gives the operator full control when starting a cut – even under difficult conditions. Available with selected tools only.

Air cushioned pistonTo reduce vibration and wear, the piston turns on air-cushions at either end of the cylinder. When working off-load, this practically eliminates metal-to-metal contact.

Rotating air inlet swivelEasy handling of the tool, even when pressurized. Available with selected tools only.

Integrated lubricatorHelps to minimize tool wear and is excellent for cold conditions, when it can be used for anti-freeze, such as Atlas Copco Breaker and Hammer AIR-OIL. It holds enough lubricant for an entire shift. Available with selected tools only.

69

Ha

nd

He

ld

p

ne

um

at

ics

Pneumatic hammers TEX 07PE TEX 07PE FSH 2

Weight kg 8,5 9

Length mm 525 525

Air consumption l/s 17 17

Impact rate blows/min 1770 1770

Vibration level 3 axes (ISO 20643) 3) m/s² 12,4 10,5

Sound power level guaranteed (2000/14/EC) 3) Lw, dB(A) 104 104

Sound pressure level (ISO 11203) 3) Lp, r=1m 87 87

Tool retainer cap cap

Shank size HEX mm 19x50 19x50

Part number (HEX shank) 8461 0209 20 8461 0209 21

Shank size round shank mm - -

Part number (round shank) - -

70

pneumatic vibro-reduced hammers teX 05-teX 12 6,5-12 kg

Applications depending on weight class:• Light duty chipping and scaling work• Renovation and conversion work• Demolition • Kiln stripping

Features:• Full canopy vibro-reduction (TEX 05, 09 and 12)• Noise-reduction• SOFSTART™ two-step trigger• HAPS™ Hand and Arm Protection System• Air cushioned piston (TEX 05, 09 and 12)• Easy handling and positioning

See also Parts and Services Catalogue:• Working tools• Accessories• Breaker and Hammer AIR-OIL

Data at 6 bar (90 psi) air pressurePE: silenced, vibro-reducedPER: silenced, vibro-reduced, round shankFSH: Front side handle

Suitable couplings:TEX 05PE Atlas Copco Standard 9000 0305 00TEX 09 & 12 Atlas Copco Standard 9000 0306 00 Atlas Copco Standard w strainer 9000 0306 01 US standard 9001 0005 06

TEX 05PE 1 TEX 09PE/PER 1,2 TEX 12PE/PER 1,2

6,5 10,5 12

450 560 590

10 17 20

2640 1800 1620

2,4 4,2 4,0

105 105 105

87 93 93

cap kick-latch kick-latch

19x50 22x82,5 22x82,5

8461 0219 10 8461 0211 35 8461 0211 38

- 25x75 25x75

- 8461 0211 36 8461 0211 39

71

1) Claw couplings not included in delivery of TEX 05, 09 and 12.2) Front side handle included3) Important: Full details of measurement are available in the Safety and Operating

Instruction of the product (part no 9800 0812 90, TEX 07PE in 9800 0653 90). They can be found on www.acprintshop.com

Ha

nd

He

ld

p

ne

um

at

ics

72

pneumatic standard hammers teX 3-teX 12 3,5-12,5 kg

Applications depending on weight class:• Light-duty chipping and scaling work• Renovation and conversion work• Demolition

Features:• SOFSTART™ two-step trigger (selected models)• Noise-reduction• Air cushioned piston


Data at 6 bar (90 psi) air pressure

1) also available with combined hexagonal/round shank (part no: 8461 0219 01)2) also available in carrying case as complete set (hexagonal shank only) 3) Important: Full details of measurement are available in the Safety and Operating Instruction

of the product (part no 9800 0799 90). It can be found on www.acprintshop.com

KL: kick latch, PS: silenced, PSR: round shank

Pneumatic hammers TEX 3 2 TEX 05P 1,2

Weight kg 3,5 5,5

Length mm 310 380

Air consumption l/s 6,9 9,5


Vibration level 3 axes (ISO 20643) 3) m/s² 14 13



Tool retainer cap cap

Shank size HEX mm 19x50 19x50

Part number (HEX shank) 8461 0208 53 8461 0219 00

Shank size round shank mm 17,3x60

Part number (round shank) - 8461 0219 03

73

Claw couplings not included in delivery

Suitable couplings:TEX 09, 10 and 12 Atlas Copco Standard 9000 0306 00 Atlas Copco Standard with strainer 9000 0306 01 US Standard (not for TEX 10) 9001 0005 06TEX 05, TEX 3 Atlas Copco Standard 9000 0305 00

TEX 09 TEX 10 TEX 12

PS KL PS/PSR PS KL PS/PSR PS KL/PSR KL PS/PSR

12 10 10,5 10 12,5 10,5

500 500 500 520 545 550

18,5 18,5 17 17 21,3 21,3

1800 1800 1350 1350 1600 1600

16,1 16,1 22,4 22,4 15,4 15,4

105 103 103 102 105 105

93 91 91 90 92 93

kick-latch cap kick-latch cap kick-latch cap

22x82,5 22x82,5 22x82,5 22x82,5 22x82,5 22x82,5

8461 0211 05 8461 0211 02 8461 0211 32 8461 0211 30 8461 0211 12 8461 0211 13

US: 8461 0211 06 US: 8461 0211 16

25x75 25x75 25x75 25x75

- 8461 0211 04 - 8461 0211 31 8461 0211 15 8461 0211 14

Ha

nd

He

ld

p

ne

um

at

ics

74

pneumatic breakers teX 140-teX 280 15-31 kg

Applications:• Light and medium sized breakers for service jobs

and general demolition in soft and medium hard materials


1) Important: Full details of measurement are available in the Safety and Operating Instruction of the product (part no 9800 0683 90). It can be found on www.acprintshop.com

2) Hex shank (mm)

Available shank sizes 2) 22x82,5 25x108

TEX 140PS Part number 8461 0223 30 8461 0223 32

TEX 150PE Part number 8461 0223 31 8461 0223 33

TEX 180PS Part number − 8461 0224 30

TEX 190PE Part number − 8461 0224 31

TEX 220PS Part number − 8461 0225 30

TEX 230PE Part number − 8461 0225 31

TEX 270PS Part number − −

TEX 280PE Part number − −

Pneumatic breakers TEX 140PS TEX 150PE TEX 180PS

Vibro-reduced NO NO YES YES NO NO

Weight kg 15,5 15,5 19 19 19 19,5

Length mm 590 590 590 590 595 645

Air consumption l/s 25 25 25 25 26 26

Impact rate bpm 1530 1530 1530 1530 1500 1500

Vibration level 3 axes (ISO 20643) 1) m/s2 15,2 15,2 4,5 4,5 14,5 14,5

Sound power level guaranteed (2000/14/EC) 1) Lw, dB(A) 104 104 104 104 104 104

Sound pressure level (ISO 11203) 1) Lp, r=1m 91 91 91 91 92 91

Shank size Hex mm 22x82,5 25x108 22x82,5 25x108 25x108 28x160

• Integrated lubricator• Air cushioned piston

See also Parts and Services Catalogue:• Working tools• Accessories• Breaker and Hammer

AIR-OIL

Features:• Solid Body concept• Noise-reduction• HAPS™ Hand and Arm

Protection System (PE series)

• SOFSTART™ two-step trigger

• Rotating air inlet swivel

75

25x108 US 28x160 32x160

8461 0223 34 − −

8461 0223 35 − −

8461 0224 34 8461 0224 32 −

8461 0224 35 8461 0224 33 −

− 8461 0225 32 8461 0225 33

− 8461 0225 34 8461 0225 35

− 8461 0226 30 8461 0226 31

− 8461 0226 32 8461 0226 33

TEX 190PE TEX 220PS TEX 230PE TEX 270PS TEX 280PE

YES YES NO NO NO YES YES YES NO NO YES YES

22,5 23 22 23,5 23,5 25,5 27 27 28 28 31,5 31,5

595 645 625 670 670 625 670 670 690 690 690 690

26 26 30 30 30 30 30 30 32 32 32 32

1500 1500 1320 1320 1320 1320 1320 1320 1230 1230 1230 1230

3,7 3,7 12,8 12,8 12,8 4,2 4,2 4,2 14,9 14,9 4,8 4,8

104 104 104 106 106 104 106 106 105 105 105 105

92 91 92 93 93 92 93 93 92 92 92 92

25x108 28x160 25x108 28x160 32x160 25x108 28x160 32x160 28x160 32x160 28x160 32x160

Claw couplings not included in deliverySuitable couplings:Atlas Copco Standard 9000 0306 00Atlas Copco Standard with strainer 9000 0306 01US Standard 9001 0005 06

Ha

nd

He

ld

p

ne

um

at

ics

76


Applications:• Medium sized breakers for service jobs and

general demolition in medium hard materials like asphalt and concrete

Features:• Noise-reduction • HAPS™ Hand and Arm Protection System

(PE series)• Air cushioned piston• Hard hitting in relation to their weight due

to extra long piston stroke


Pneumatic breakers TEX 20PS TEX 20PS-1 TEX 21PE TEX 21PE-1

Weight kg 20 20 21 21

Length mm 635 600 650 615

Air consumption l/s 25 25 25 25

Impact rate blows/min 1140 1140 1140 1140

Vibration level 3 axes (ISO 20643) 1) m/s² 18,3 18,3 7,6 7,6

Sound power level guaranteed (2000/14/EC) 1)

Lw, dB(A) 105 105 105 105

Sound pressure level (ISO 11203) 1) Lp, r=1m 93 93 93 93

Shank size mm H 25x108R 25x75 w.

square collarH 25x108

R 25x75 w. square collar

Part number 8461 0224 20 8461 0224 21 8461 0224 22 8461 0224 23

Data at 6 bar (90 psi) air pressure.Claw couplings not included in delivery

Suitable couplings:Atlas Copco Standard 9000 0306 00Atlas Copco Standard with strainer 9000 0306 01

1) Important: Full details of meas-urement are available in the Safety and Operating Instruc-tion of the product (part no 9800 0650 90) It can be found on www.acprintshop.com

77

pneumatic breakers teX p60-teX p90 33-43 kg

Applications:• Heavy-duty breakers for use in medium and hard

materials such as asphalt and concrete• TEX P60: asphalt and other medium hard materials• TEX P90: hard/reinforced concrete

Features:• Solid Body concept• Noise-reduction • SOFSTART™ two-step trigger• Rotating air inlet swivel• Integrated lubricator• Air cushioned piston


Pneumatic breakers TEX P60S TEX P90S

Weight kg 33 33 43 43

Length mm 690 690 710 710

Air consumption l/s 36 36 40 40

Impact rate blows/min 1500 1500 1260 1260

Vibration level 3 axes (ISO 20643) 1) m/s² 16,8 16,8 15,3 15,3

Sound power level guaranteed (2000/14/EC) 1)

Lw, dB(A) 109 109 111 111


Shank size Hex mm 28x160 32x160 28x160 32x160

Part number 8461 0227 22 8461 0227 23 8461 0228 22 8461 0228 23

Data at 6 bar (90 psi) air pressure.Unsilenced models available on request in some markets.Claw couplings not included in delivery.

Suitable couplings:Atlas Copco Standard 9000 0306 00Atlas Copco Standard with strainer 9000 0306 01US Standard 9001 0005 06


Ha

nd

He

ld

p

ne

um

at

ics

78


Applications:• Heavy-duty demolition breakers for use in

medium and hard materials such as asphalt and reinforced concrete

Features:• Noise-reduction • HAPS™ Hand and Arm Protection System (PE series)• Rotating air inlet swivel• Integrated lubricator• Air cushioned piston


Data at 6 bar (90 psi) air pressure. Unsilenced models TEX 32P and TEX 39P available on request in some markets.1) Important: Full details of measurement are available in the Safety and Operating Instruction


Pneumatic breakers TEX 32PS

Weight kg 34 34

Length mm 745 745






Shank size Hex mm 28x160 32x160

Part number 8461 0227 03 8461 0227 05

79

Claw couplings not included in delivery. Suitable couplings:Atlas Copco Standard 9000 0306 00Atlas Copco Standard with strainer 9000 0306 01US Standard 9001 0005 06

TEX 33PE TEX 39PS TEX 40PE

37 37 39 39 42 42

745 745 750 750 750 750

34 34 40 40 40 40

1200 1200 1110 1110 1110 1110

5,7 5,7 14,3 14,3 4,2 4,2

111 111 111 111 111 111

99 99 99 99 99 99

28x160 32x160 28x160 32x160 28x160 32x160

8461 0227 01 8461 0227 00 8461 0228 03 8461 0228 01 8461 0228 05 8461 0228 04

Ha

nd

He

ld

p

ne

um

at

ics

80

Data at 6 bar (90 psi) air pressure. US versions and pumping kits also available.

pneumatic pumps

Applications DIP:Centrifugal pumps designed for clean, low-viscosity liquids such as water.

Applications DOP:Diaphragm pump designed for construction, mining and industrial applications or process industry• Polluted media• Viscous media• Highly abrasive or inflammable fluids• 15N: mainly for construction industry• 15F: mainly for process industry

Features:• Robust• Cannot be damaged by overloading

Pneumatic pumps DIP 25 DIP 35 DIP 65 DOP 15N DOP 15F

Max. head m 25 35 59 59 59

Max. flow l/s 28 22 11 7 7

Max. air requirement l/s 70 70 70 34 34

Weight kg 23 23 23 31 31

Fluid outlet in G 2 1/2 G 2 1/2 G 2 1/2 G 2 1/2 G 2 1/2

Air inlet in G 3/4 G 3/4 G 3/4 G 3/4 G 3/4

Air outlet in G 1 1/2 G 1 1/2 G 1 1/2

Part number 8492 0103 20 8492 0103 38 8492 0106 19 8492 0101 48 8492 0101 63

81

¹) 19 mm drill in granite²) 19 mm drill in concrete3) Important: Full details of measurement are available in the Safety and Operating Instruction

of the product (part no 9800 0938 90). It can be found on www.acprintshop.com4) Also available in carrying case as complete set (8463 0103 61)

pneumatic combi drills/hammers

Applications:• Plug hole drilling 8-38 mm

diameter• Wedge hole drilling• Chipping and scaling• Renovation and rebuilding• Underwater work

Features:• Built-in air flushing• Noise-reduction• Switching between drilling/chipping

by change of working tool• Built-in lubricator

See also Parts and Services Catalogue:• Working tools• Rock drill AIR-OIL

DKR 36 Kit

Pneumatic combi drills/hammers DKR 36 4) DKR 36R

Weight kg 4,5 4,5

Length mm 380 380

Air consumption at 6 bar l/s 10 10


Revolutions rpm 250 250

Penetration rate mm/min 180¹/160² 180¹/160²

Hose connection mm 19 19

Vibration level 3 axes (ISO 20643) 3) m/s²

20,2 (breaking)21,2 (drilling)

20,2 (breaking)21,2 (drilling)



Shank size mm R19xH14,7x89 R19x95

Part number 8463 0103 60 8463 0103 50

Ha

nd

He

ld

p

ne

um

at

ics

82

pneumatic rock drills

Applications:• Drill up to 2 m depth• Plug hole drilling• Anchor and wedge hole drilling

Features:• Noise-reduction (S-versions)• HAPS™ Hand and Arm Protection System (E-versions)• Built in air flushing• Trigger version available (ET)

See also Parts and Services Catalogue:• Accessories• Rock drill AIR OIL• Working tools


1) In granite, drilling with 28 mm at 6 bar2) In granite, drilling with 32 mm at 6 bar3) Important: Full details of measurement are available in the Safety and Operating Instruction


Pneumatic rock drills BBD 12D BBD 12DS BBD 12DCS

Weight kg 9,8 10,7 10,5

Length mm 565 565 560

Air consumption l/s 24 22 22

Impact rate blows/min 2580 2580 2580

Revolutions rpm 220 220 220

Penetration rate mm/min 250 ¹) 230 ¹) 230 ¹)

Hose connection mm 13 13 13

Vibration level 3 axes (ISO 20643) 3) m/s² 22,2 22,2 22,2

Sound power level guaranteed (2000/14/EC) 3) Lw, dB(A) 114 108 108

Sound pressure level (ISO 11203) 3) Lp, r=1m 103 97 97

Shank size mm 19x108 19x108 19x108

Part number 8311 0102 47 8311 0102 80 8311 0101 63

83

D = D-handleT = T-handleE = vibro-reduced handlesET = vibro-reduced handles, trigger startC = capS = silenced

BBD 12T-01 BBD 12TS-01 BBD 15E BBD 15ET

11,1 12,1 15,5 15,5 15,5 15,6 15,6

505 505 575 575 575 575 575

24 22 22 22 22 22 22

2580 2580 2520 2520 2520 2520 2520

220 220 220 220 220 220 220

150 ²) 150 ²) 220 ¹) 220 ¹) 220 ¹) 220 ¹) 220 ¹)

19 19 19 19 19 16 16

16 16 7 7 7 7 7

116 111 110 110 110 110 110

103 98 97 97 97 97 97

22x108 22x108 19x108 22x108 22x82,5 19x108 22x108

8311 0102 95 8311 0102 98 8311 0104 02 8311 0104 10 8311 0104 09 8311 0104 12 8311 0104 13

Ha

nd

He

ld

p

ne

um

at

ics

84

pneumatic rock drills

Applications:• Drill up to 6 m depth• Production drilling in quarry/dimension

stone industry• Blast hole and secondary drilling

Features:• Noise-reduction (S-versions)• HAPS™ Hand and Arm Protection System (E-versions)• Built in air flushing• Extra flushing for quick and efficient hole cleaning

See also Parts and Services Catalogue:• Accessories• Rock drill AIR OIL• Working tools


1) In granite, drilling with 32 mm at 6 bar2) Important: Full details of measurement are available in the Safety and Operating Instruction


Pneumatic rock drills RH 571-5L RH 571-5LS

Weight kg 18 19

Length mm 510 510



Revolutions rpm 190 190

Penetration rate 1) mm/min 295 275

Hose connection mm 19 19




Shank size mm 22x108 22x108

Part number 8311 0301 29 8311 0301 37

85

E = vibro-reduced handlesS = silenced

RH 572E RH 658L RH 658LS

23 24 25

583 565 565

37 58 58

2040 2040 2040

170 215 215

260 425 425

19 19 19

9,7 21,2 21,2

113 116 112

100 106 99

22x108 22x108 22x108

8311 0301 78 8311 0302 86 8311 0302 87

Ha

nd

He

ld

p

ne

um

at

ics

86

Rock drills Underground + feed legs

Applications:• Production drilling• Mining and construction• Dimension stone industry

Features:• High quality, designed for production drilling• Noise-reduction (16 WS, 34 WS, 94 WE)• Built in water flushing• ATEX certification (BBC 34 WS, BMK 91RS)• Single or double telescopic pusher legs

See also Parts and Services Catalogue:• Accessories • Rock drill AIR OIL

Data at 6 bar (90 psi) air pressure.

Rock drills BBC 16W BBC 16 WS Silenced version

Hole range mm 27-41 27-41

Weight kg 28,5 29,5

Length mm 705 705



Piston bore mm 70 70

Stroke length mm 55 55

Vibration level 3 axes (ISO 5349-2) 1) m/s² 16,6 16,6



Part number 8311 0401 10 8311 0303 46

Pusher legs Single telescope

Type BMT 51 ALF 71 ALF 71-1 ALF 72D

Suitable for rock drill: BBC 16W, 34W BBC 16W, 34W BBC 16W, 34W BBD 94W

Feeding length mm 1300 1300 950 1300

Length retracted mm 1658 1805 1455 1970

Length extracted mm 2958 3105 2405 3270

Weight kg 15 14 13 19

Piston bore mm 60 70 70 70

Part number 8321 0301 01 8321 0201 94 8321 0201 95 8321 0201 80

1) Important: Full details of measurement is available in the Safety and Operating Instruction of the product. It can be found on www.acprintshop.com.

87

Get more information about Cost-Per-Meter contracts for large fleet owners. Please contact your Atlas Copco sales representative for further information.

BBC 34W BBC 34 WS Silenced version

BBD 94W BBD 94WE Silenced version

BBD 94WS ATEX

RH 656W

27-41 27-41 27-41 27-41 27-41 27-41

33,5 34,5 28 28,5 31 22

775 775 670 670 670 658

88 88 97 97 97 48

2280 2280 3300 3300 3300 2040

80 80 90 90 90 65

70 70 45 45 45 59

20,4 20,4 15 15 15 21,2

127 120 125 120 125 120

116 109 114 109 114 115

8311 0408 05 8311 0303 47 8311 0206 09 8311 0303 44 8311 0206 12 8311 0303 45

Double telescope

ALF 72D-1 BMK 62S BMK 91RS ALF 67/80 ALF 67/80D

BBD 94W RH 656W BBD 94WS BBC 16W, 343W BBD 94W

1200 1300 1300 1855 1855

1830 1815 1870 1495 1595

3030 3115 3170 3350 3450

16 17 24 17 19

70 53 67 67/80 67/80

8321 0201 81 8321 0102 02 8321 0104 27 8321 0201 85 8321 0201 69

Ha

nd

He

ld

p

ne

um

at

ics

88

Stopers BBD 46WS-6 BBD 46WS-8

Hole range mm 27-41 27-41

Weight kg 39 40

Length retracted mm 1435 1650

Length extracted mm 2205 2620


Impact rate bpm 3000 3000






Part number 8311 0202 03 8311 0202 11

Data at 6 bar (90 psi) air pressureR=right rotation

Rock drills Stopers

Applications:• Raise driving and bolting• Screening

Features:• High quality, designed for production drilling• Front flushing of drill steel to keep water and cuttings

out from the drill (BBC 34)• Clock wise rotation for bolting (BBD 46 WR)

See also Parts and Services Catalogue:• Accessories• Rock drill AIR OIL


89

BBD 46WR-6 BBD 46WR-8 BBC 34WS-6 BBC 34WS-8

27-41 27-41 27-41 27-41

39 40 45,5 46,5

1435 1650 1610 1810

2205 2620 2380 2780

90 90 125 125

3000 3000 2340 2340

75 75 80 80

45 45 70 70

10 10 30,5 30,5

124 124 129 129

121 121 118 118

8311 0202 29 8311 0202 37 8311 0104 03 8311 0104 04

Ha

nd

He

ld

p

ne

um

at

ics

90

Rig-mounted rock drills BBD 94-DSI BBC 34-DSI

Weight kg 26 31

Length mm 670 775


Impact rate bpm 3300 2280





Sound pressure level (ISO 11203) 1) Lp, r=1m

Part number 8311 0206 10 8311 0408 06

1) Important: Full details of measurement are available in the Safety and Operating Instruction of the product (part no 9800 0669 71 & 9800 0829 71). It can be found on www.acprintshop.com

Rig-mounted pneumatic rock drills

Applications:• Dimension stone industry (DSI)• Marble and granite quarries• Cable or chain feed drilling

Features:• Noise-reduction (BBC 34 DSI)• Efficient air flushing• Can be converted to water flushing• production drilling

See also Parts and Services Catalogue:• Accessories• Rock drill AIR-OIL

91

Ha

nd

He

ld

p

ne

um

at

ics

92

Handheld hydraulics

Small and lightConstruction and rental companies around the world are discovering the advantages of using hydraulics. They know that hydraulic equipment offers the best power-to-weight ratio of any system. And they appreciate that a hydraulic power pack is so small and light that two people can lift one up and fit it in the back of a van.

Smaller construction and rental companies have been quick to understand the very real cost advantage of hydraulics. For the price of one compressor/breaker com-bination, you can buy two complete hydraulic power pack/breaker sets. In fact, you might not need a power pack at all: with the help of an oil flow divider and an extension hose, you can hook hydraulic tools directly to a hydraulic-powered carrier. Hydraulic power packs are a flexible power source: use them to power cut-off saws, core drills, submersible pumps and many other tools. You can use hydraulic tools anywhere, independent of electric or pneumatic supply. With no exhaust, you can put them to work indoors and out. And they can be used whether it’s hot or cold, dusty or wet or even underwater.

Easy to ownThere’s not much that can go wrong with an Atlas Copco hydraulic tool. With just two moving parts, lubricated continously by the hydraulic oil, there’s minimal wear and very few parts to replace. Hydraulics are by nature reli-able: Working in a closed loop, dirt and moisture are kept out. And with the no-spill, flat-face couplings, it’s easy to keep the system clean and to ensure correct connection.

93

Ha

nd

He

ld

H

yd

ra

ulic

s

94

Hydraulic power packs

1) Non CE noise approved version2) 7 m extension twin-hose comes as standard with LP 9-20 P and LP 13-30 P

Features:• Portable, compact and light weight• High efficiency, low noise and low fuel

consumption thanks to Power On Demand function (available with selected models only)

• Low maintanance, long lifetime – moving parts move in a closed lubricated circuit

• Protective steel frame with foldable handles• Lifting eye and cross lifting bar• No exhaust or emission from the tools – power pack

with engine can be placed away from tool• Large return filter and replacement indicator• Thermostatically-controlled oil cooler

See also Parts and Services Catalogue:• Power Pack BIO-OIL• Oil flow dividers• Extension hoses

Power packs Petrol driven

LP 9-20 P 2) LP 13-30 P 2) LP 18-30 PE LP 18-40 PE

Engine9 HP

Honda petrol13 HP

Honda petrol

18 HPB&S Vanguard

petrol

18 HPB&S Vanguard

petrol

Weight (incl oil) kg 72 91 118 118

Dimensions (LxWxH) mm 710x525x585 745x600x705 790x605x690 790x605x690

Oil flow l/min 20 20-30 20-30 20-40

Maximum pressure bar 150 150 170 145

Fuel capacity l 6 6,5 7,2 7,2

Hose included YES YES NO NO

Power on Demand (POD) YES YES NO NO

Oil control: engine oil YES YES YES YES

Electric start NO NO YES YES

Sound power level guaranteed (2000/14/EC) 3) Lw, dB(A) 101 101 101 101


EHTMA class C C/D C/D C/D/E

Part number 1807 0080 09 1807 0110 12 1807 0160 41 1807 0160 38

Part number 1) 1807 0080 31 1807 0110 23 - 1807 0160 40

95

3) Important: Full details of measurement is available in the Safety and Operating Instruction of the product. It can be found on www.acprintshop.com

Petrol Diesel driven Electric driven

LP 18 Twin PE LP 13-20 DEL LP 9-20 E LP 18-30 E LP 18-40 E LP 18 Twin E

18 HPB&S Vanguard

petrol

10 HPLombardini

diesel

5,5 kW / 3x400 V / 16AElectric

11 kW / 3x400 V / 32A

Electric

11 kW / 3x400 V / 32A

Electric

11 kW / 3x400 V / 32A

Electric

111 116 70 130 130 123

755x700x720 745x600x705 610x525x585 815x605x690 815x605x690 745x605x705

2x20/1x40 20 20 30 40 2x20/1x40

145 150 150 172 155 155

7,2 5,5 - - - -

NO NO NO NO NO NO

YES NO NO NO NO NO

YES NO NO NO NO NO

YES YES YES YES YES YES

101 - 101 101 101 101

88 - 79 86 86 86

C/E C C D E C/E

1807 0160 16 - 1807 0080 15 1807 0160 43 1807 0160 42 1807 0160 22

1807 0160 32 1807 0110 20 - - - -

Ha

nd

He

ld

H

yd

ra

ulic

s

96

Hydraulic standard hammer and breakers

Applications:• Breaking light concrete and brickwork

(LH 11)• Medium and hard materials as

asphalt and concrete

Features:• Low noise levels• Slim design• High power to weight ratio• High back pressure (HBP) versions for skid steer

connections

See also Parts and Services Catalogue:• Working Tools• Chisel paste• Oil flow dividers• Extension hoses

1) Weights for LH 180 with Hex 25, LH 220, LH 270, LH 390 with Hex 32.2) Lengths for LH 180 with Hex 25, LH 220, LH 270, LH 390 with Hex 32

LH 11 Pick hammer

Hammer and breakers LH 11 4) LH 180

Weight 1) kg 15,5 19,5

Length 2) mm 650 650

Oil flow l/min 20 20

Working pressure bar 80-100 95-110

Max back pressure bar 10 10


Vibration level 3 axes (ISO 20643) 2) 3) m/s² 16,5 -



EHTMA class C C

Part number LH 11 LH 180

Hex 22x82,5 1801 1741 18 -

Hex 25x108 - 1801 3443 36

Hex 28x152 - 1801 3443 37

Hex 28x160 - 1801 3443 38

Hex 32x152 - 1801 3443 39

Hex 32x160 - 1801 3443 40

97


4) Front handle as option5) HBP: High Back Pressure

LH 220 LH 220 HBP 5) LH 270 LH 270 HBP 5) LH 390 LH 390 HBP 5)

22,5 22,5 26,5 26,5 33 33

690 690 765 765 765 765

20-30 20-30 20-30 20-30 30-40 30

125 115-130 110-125 115-130 110-125 115-130

15 35 15 35 15 20

1500-2100 1500-2100 1350-1750 1350-1750 1150-1600 1150-1600

- - - - - -

107 107 110 110 106 106

94 94 95 95 93 93

C/D C/D C/D C/D D/E D

LH 220 LH 220 HBP LH 270 LH 270 HBP LH 390 LH 390 HBP

- - - - - -

1801 3543 46 1801 3546 87 - - - -

1801 3543 47 1801 3546 88 1801 3643 56 1801 3646 97 1801 3743 64 1801 3647 05

1801 3543 48 1801 3546 89 1801 3643 57 1801 3646 98 1801 3743 65 1801 3647 06

1801 3543 49 1801 3546 90 1801 3643 58 1801 3646 99 1801 3743 66 1801 3647 07

1801 3543 50 1801 3546 91 1801 3643 59 1801 3647 00 1801 3743 67 1801 3647 08

Ha

nd

He

ld

H

yd

ra

ulic

s

98

Hydraulic vibro-reduced breakers

Applications:• Medium and hard materials as

asphalt and concrete

Features:• Vibro-reduction• Vibro-damping chisel bushing• Low noise levels• Slim design• High power to weight ratio• High back pressure (HBP) versions for skid steer

connections

See also Parts and Services Catalogue:• Working Tools• Chisel paste • Oil flow dividers• Extension hoses

1) LH 190 E with Hex 25, LH 230 E, LH 280 E and LH 400 E with Hex 32.2) Lengths for LH 190 E with Hex 25, LH 230 E, LH 280 E, LH 400 E with Hex 32

Breakers LH 190 E

Weight 1) kg 25

Length 2) mm 650

Oil flow l/min 20

Working pressure bar 95-110

Return line pressure max bar 10

Impact rate blows/min 1400

Vibration level 3 axes (ISO 20643) 2) 3) m/s² -

Sound power level guaranteed (2000/14/EC) 3) Lw, dB(A) 107

Sound pressure level (ISO 11203) 3) Lp, r=1m 93

EHTMA class C

Part number LH 190 E

Hex 22x82,5 -

Hex 25x108 1801 3443 41

Hex 28x152 1801 3443 42

Hex 28x160 1801 3443 43

Hex 32x152 1801 3443 44

Hex 32x160 1801 3443 45

99

3) Important: Full details of measurement are available in the Safety and Operating Instruc-tion of the product (part no 3392 5206 90). It can be found on www.acprintshop.com

4) HBP: High Back Pressure

LH 230 E LH 230 E HBP 4) LH 280 E LH 280 E HBP 4) LH 400 E LH 400 E HBP 4)

28 28 32,5 32,5 39 39

735 735 765 765 765 765

20-30 20-30 20-30 20-30 30-40 30

105-125 115-130 110-125 115-130 110-125 115-130

15 35 15 35 15 20

1500-2100 1500-2100 1350-1750 1350-1750 1150-1600 1150-1600

- - - - - -

107 107 110 110 106 106

94 94 95 95 93 93

C/D C/D C/D C/D D/E D

LH 230 E LH 230 E HBP LH 280 E LH 280 E HBP LH 400 E LH 400 E HBP

- - - - - -

1801 3543 51 1801 3546 92 - - - -

1801 3543 52 1801 3546 93 1801 3643 60 1801 3647 01 1801 3743 68 1801 3647 09

1801 3543 53 1801 3546 94 1801 3643 61 1801 3647 02 1801 3743 69 1801 3647 10

1801 3543 54 1801 3546 95 1801 3643 62 1801 3647 03 1801 3743 70 1801 3647 11

1801 3543 17 1801 3546 96 1801 3643 63 1801 3647 04 1801 3743 71 1801 3647 12

Ha

nd

He

ld

H

yd

ra

ulic

s

100

Hydraulic rock drill

Applications:• Drills down to 6 m depth and

up to 50 mm diameter: • Blast holes• Anchor holes• Rock-splitting holes

Features:• Torque limiter prevents operator kick-back• Anticlockwise rotation as option• A drifter version for separate operation of

impact and two way rotation is available.

See also Parts and Services Catalogue:• Oil flow dividers• Extension hoses

1) At 25 l/min.2) Important: Full details of measurement is available in the Safety and Operating Instruction


Rock drill LHD 23 M

Shank size Hex mm 22x108

Weight including hoses kg 26

Service weight kg 28,5

Oil flow l/min 20-25

Working pressure bar 100-140

Max back pressure bar 15

Impact rate 1) blows/min 2550

Revolutions rpm 320-400

Torque Nm 65

Vibration level 3 axes (ISO 20643) 2) m/s² 11,7

Sound power level guaranteed (2000/14/EC) 2) Lw, dB(A) 115

Sound pressure level (ISO 11203) 2) Lp, r=1m 104

EHTMA class C

Part number, clockwise rotation 1801 3800 01

Part number, CCW rotation 1801 3800 02

101

Hydraulic pumps

Applications:Pumping of clean or contaminated water and slurry:• On building sites• In flooded excavations• In cellars• In wells

Features:• Spark proof motor• Can run dry• Including 10 m discharge hose

with quick coupling


Water pumps LWP 2 LTP 3

Weight kg 11 13

Width mm 225 300

Oil flow l/min 18-24 26-38

Working pressure bar 100 140

Max working Pressure bar 160 172

Pump head max m 25 32

Pump flow max l/min 840 1920

Discharge 2" 3"

Solids handling up to mm 10 60

EHTMA class C D

Part number 1806 1014 34 1806 1014 35

Ha

nd

He

ld

H

yd

ra

ulic

s

102

Hydraulic core drills

Applications:• Safe handheld drilling in reinforced concrete and

asphalt up to 200 mm diameter in confined spaces, for ventilation, heating, gas piping and other installations

• Works efficient also in underwater applications

Features:• High power to weight ratio• Low vibrations• Low kick-back• Hydraulic torque control• Fits in standard drill stands• Closed hydraulic circuit • Comes in carrying steel case as standard

See also Parts and Services Catalogue:• Diamond core bits• Oil flow dividers• Extension hoses• Water kit

Core drills LCD 500 LCD 1500

Weight including hoses kg 9,5 9

Oil flow rate l/min 20-30 20-30

Length without drill mm 414 406


Revolutions rpm 600-900 1500-2250

Drill diameter mm 50-202 12-75

Thread female (drive) 1) ½" BSP ½" BSP

Vibration level 3 axes (ISO 28927-5) 2) m/s² 3,1 2,7

Sound pressure level (ISO 11203) 2) Lp, r=1m <70 <70

EHTMA class C/D C/D

Part number 1806 1014 38 1806 1014 39

1) 1/2” BSP male x 1 1⁄4 UNC male drive adaptor included for use of larger diameter core bits.2) Important: Full details of measurement is available in the Safety and Operating Instruction of

the product (part no 3392 5189 90). It can be found on www.acprintshop.com

103

Hydraulic cut-off saws

Applications:• Cuts 133-160 mm depth• Works in dust, slurry and

underwater• Used for cutting:

• Concrete, reinforced concrete• Asphalt• Steel

• Used with:• Dry and wet diamond discs• Abrasive steel cutting discs

Features:• Simple design with direct drive motor• Open visible cutting face• High power-to-weight ratio• Compact and slim design

See also Parts and Services Catalogue:• Diamond discs• Oil flow dividers• Extension hoses• Water kit• Cart

1) Important: Full details of measurement is available in the Safety and Operating Instruction of the product (part no 3392 5042 90). It can be found on www.acprintshop.com

Cut-off saws LS 14 LS 16

Weight including hoses kg 12 13


Max oil pressure bar 170 170

Revolutions rpm 2500-4000 2000-4000

Speed m/s 46-75 42-85

Disc size mm 355 405

Arbor size mm 25,4 25,4

Cutting depth mm 133 160




EHTMA class C/D C/D/E

Part number 1809 0140 01 1809 0160 00

Ha

nd

He

ld

H

yd

ra

ulic

s

104

Applications:• Drives up to 96 mm diameter poles• For driving of:

• Road barriers• Tubes / profiles• Signposts• Fences• Anchors

Features:• Available with built in on/off valve or

hose mounted remote on/off valve

See also Parts and Services Catalogue:• Oil flow dividers• Extension hoses• Post driver adaptors

Hydraulic post drivers

Post drivers LPD-T HBP LPD-RV HBP

Activation type By trigger lever By remote valve

Hydraulic system Open centre Open- or closed-centre

Weight including hoses kg 32 33

Service weight with adaptor kg 34 34,5



Impact rate at 30 l/min blows/min 1680 1680

Hydraulic ports ½" BSP ½" BSP

Vibration level 3 axes (ISO 20643) 1) m/s² 12,8 -

Sound power level guaranteed (2000/14/EC) Lw, dB(A) 115 115


EHTMA class C/D C/D

Part number 1801 4040 02 1801 4050 02


105

Applications:• For removal of any pole, steel beam or

tube with diameters up to 200 mm• For removing of:

• Wooden posts• Steel posts (incl IPE, HPE and UPE profile)• Round/square steel tubes• Fence posts• Anchors

Features:• Integrated jaw• Automatic chain tightening clamp• Total pulling force up to 10 tons

See also Parts and Services Catalogue:• Oil flow dividers• Extension hoses• Lever kit

Hydraulic post puller

1) Lever kit, part number 3371 8101 48

Post puller LPP 10 HD

Weight kg 60

Oil flow l/min 20-40

Max. working pressure bar 172

Max. back pressure bar 30

Lift capacity per stroke mm 12-200

Pulling force kg 6000

Full pulling force 1) kg 10000

EHTMA class C/D/E


Ha

nd

He

ld

H

yd

ra

ulic

s

106

Hydraulic ground rod drivers

Applications:• Drives earth connectors to depths of

10-15 m• Light fencing and spike/anchor driving

Features:• Standard chuck sizes for up to 16 mm and 25 mm rods• Hose mounted on/off valve for easy driving of long

rods


Ground rod drivers LGRD-RV 16 LGRD-RV 25

Weight with hoses, control valve kg 23 23

Max working pressure bar 105-125 105-125


Impact rate at 30 l/min blows/min 1600 1600

Hydraulic ports ½" BSP ½" BSP

Bushing diameter mm 16 25




EHTMA class C/D C/D

Part number 1801 3940 01 1801 3940 00

1) Important: Full details of measurement is available in the Safety and Operating Instruction of the product (part no 3392 5007 01). It can be found on www.acprintshop.com

LPHB LPHB-M

107

Applications:• Drilling preparations for:

• Fence posts • Planting holes• Signpost holes• Drilling depth down

to 1,5 m

Features LPHB:• Two way rotation – ideal

in stony ground • Adjustable rotation

speed and torque limiter• Quick change of auger

without any tools

See also Parts and Services Catalogue:• Oil flow dividers• Extension hoses• Augers• Extension rod

Features LPHB-M:• Standard ½” BSP

connection• Quick change of auger

without any tools

Hydraulic posthole borerHandheld and rig-mounted

1) Without auger and top plate2) At 140 bar3) Important: Full details of measurement is available in the Safety and Operating Instruction


Handheld post hole borer LPHB LPHB-M

Weight kg 20 31 1)


Working pressure bar 100-140 160

Max back pressure bar 50 -

Torque Nm 315 450 2)

Speed of rotation rpm 90-188 80-200

Auger size at L=870 mm 90-350 -

Vibration level 3 axes (ISO 20643) 3) m/s² 7,4

Sound pressure level (ISO 11203) 3) Lp, r=1m <70

EHTMA class C/D -

Part number 1806 1014 33 1806 1014 37

Ha

nd

He

ld

H

yd

ra

ulic

s

Petrol breakers/drills Cobra Pro Cobra TT

Weight kg 25 25

Length mm 927 927

Impact energy Joules 60 40


Engine power kW 2 1,5

Fuel capacity l 1 1




Available shank sizes

22x108 Part number

32X160 Part number 8318 0700 35 8318 0700 43

32X160 Cobra TT-AWD 8318 0700 51

32X152 Part number 8318 0700 37 8318 0700 45

28X160 Part number 8318 0700 39 8318 0700 47

28X152 Part number 8318 0700 41 8318 0700 49

Petrol breakers/drills

See also Parts and Services Catalogue:• Cobra™&Compactor

ImpaCt-OIl• 2-strokeOIl

Applications:• Drillingandbreaking

(Cobra™Combi,pionjär 120)

• Workonremotesites• Breakingconcrete• Cuttingasphalt• tampingandcompacting• Drivingspikes,tubes,

poles,groundrodsandprobes

• Diggingditchesandholes• tietamping

Features:• Easytotransport• Quickset-uptime• HapS™Handandarm

protectionSystem(notpionjär)

• lowemissions• lownoise

Cobra™ Pro and TT• adjustablehandles• Centrallubrication• Highimpactpower

Cobra™ Pro, TT and Combi• Catalyticconverterfor

lowemission

Pionjär• Idealforhighaltitude

operations

1) Pionjär is not sold within the EU

108

ha

nd

he

ld

P

et

ro

l

Cobra Combi Pionjär 120 1) Pionjär 130 1)

25 27 25

732 730 700

22-25 22-25 22-25

2700 2600 2600

2 2 2

1,2 1,1 1,1

5,8 (breaking) 9,3 (drilling)

- -

108 - -

95 101 101

8318 0800 08 8318 0326 07 8318 0328 05

109

Cobra Combi for drilling and

breaking

Cobra Pro/TT for breaking and

tamping

2) Important: Full details of measurement are available in the Safety and Operating Instruc-tion of the product (part no 9800 0956 90 (Cobra Pro/TT), 9800 0955 90 (Cobra Combi) ). They can be found on www.acprintshop.com

110

Hydraulic breakers

Solid Body conceptThe Solid Body concept integrates the percussion mechanism and guide system into one single block of steel. This unique design makes the SB breakers extremely compact and easy to handle. The Solid Body concept is standard for all breakers in the SB range.

VibroSilenced Plus systemThe VibroSilenced Plus system is a highly efficient arrangement of damping elements which acoustically insulates the percussion mechanism from the breaker box guide system. Thanks to this concept, Atlas Copco breakers are among the quietest on the market. This has been proven by measurements based on Directive 2000/14/EC. Moreover, the VibroSilenced Plus system helps to minimize the level of vibration to which the carrier and its operator are exposed.

DustProtector IIThe DustProtector II is a unique two-stage sealing system, helping to reduce the penetration of rock dust and debris into the lower breaker section. Operations can be more long-term and trouble-free, especially under very dusty working conditions. This unique, protective feature is available on all MB & HB hydraulic breakers. All breakers in the SB range are protected by a dust protection ring.

ContiLube™ IIThe automatic lubrication system offers an optimal and cost-effective lubrication. It is a fixed component that is directly attached to the breaker, working autonomously and easily accessible without long hose connections. All connection ports are protected in the breaker housing. The filling level of the cartridge can always be monitored by the operator since its position on the breaker is within his field of vision. All breakers of the MB and HB series are equipped with ContiLube™ II as standard. SB breakers can be equipped with ContiLube™ II micro (option)

111

AutoControl AutoControl helps to boost the performance of Atlas Copco breakers. The system automatically controls the breaker output to suit the working conditions and rock hardness, thereby creating a highly effective tool for users: maximum blow frequency for soft materials and maximum single-blow energy when things get tougher. Standard for breakers from MB 1000 upwards and all HB breakers.

StartSelect™The StartSelect system comprises two functions for start and stop which allow the start-up and shut-off behaviour of the breaker to be set in line with the actual working conditions: the AutoStart mode for jobs in unstable ground, the AutoStop mode for jobs on firm grounds. This allows the operator to work extremely efficient. StartSelect™ is standard from MB 1200 upwards and on all HB breakers.

PowerAdapt Since excessive oil pressure is extremely damaging for a hydraulic breaker, PowerAdapt helps to prevent overloads by switching off the attachment, thereby reducing downtimes and repair costs. PowerAdapt is standard for all HB breakers. All breakers in the SB range are protected by an overload protection valve.

rig

-mo

un

te

d

br

ea

ke

rs

112

1) Weightsapplytostandardcarriersonly.AnyvariancesmustbeagreedwithAtlasCopcoand/orthecarriermanufacturerpriortoattachment.

2) Breakerwithstandardadapterplusworkingtoolandscrewkit.

Light hydraulic breakers 55-520 kg

Applications:• Road construction• Smaller trenching and demolition jobs• Building renovation• Landscaping• Boulder size reduction in quarries

Features:• Energy Recovery• Solid Body concept• Noise reduction• Dust protection• Overload protection valve• Double tool retainer bars• Integrated maintenance free accumulator

Option:• ContiLube™ II micro

See also Parts and Services Catalogue:• Warranty extension 1+2 program• Working tools• Lubricants• Maintenance kits• Connection hoses

Light hydraulic breakers SB 52 SB 102

Carrierweightclass1) t 0,7-1,1 1,1–3,0

Serviceweight2) kg 55 90

Oilflow l/min 12-27 16-35

Operatingpressure bar 100-150 100-150

Impactrate bpm 750-1700 750-2300

Workingtooldiameter mm 40 45

Workinglengthoftool mm 255 250

Max.hydr.inputpower kW 7 9

Startupmode AutoStart AutoStart

Soundpowerlevelguaranteed3) dB(A) 117 115

Soundpressurelevel(r=10m)3) dB(A) 89 87

Partnumber 8460030010 8460030030

113

3) Important:ENISO3744inaccordancewithdirective2000/14/EC.FulldetailsofmeasurementareavailableintheSafetyandOperatingInstructionoftheproduct(partno9800064890).Itcanbefoundonwww.acprintshop.com

SB 152 SB 202 SB 302 SB 452 SB 552

1,9–4,5 2,5–6,0 4,5–9,0 6,5-13 9,0-15,0

140 200 300 440 520

25-45 35-65 50-80 55-100 65-115

100-150 100-150 100-150 100-150 100-150

850-1900 850-1800 600-1400 550-1250 660-1150

50 65 80 95 100

250 300 440 470 475

11 17 20 25 29

AutoStart AutoStart AutoStart AutoStart AutoStart

114 118 119 122 126

85 90 91 94 97

8460030040 8460030050 8460030060 8460030070 8460030080

rig

-mo

un

te

d

br

ea

ke

rs

114

medium hydraulic breakers 750-1700 kg


2) Breakerandbreakerboxwithstandardadapterplusworkingtoolandscrewkit.

Applications:• Demoltion • Foundation work • Tunnelling • Trenching • Underwater work• Boulder size reduction in

quarries

Features:• VibroSilenced Plus

system• ContiLube™ II• Energy Recovery• AutoControl (MB 1000

upwards)• StartSelect™

(MB 1200 upwards)• Percussion chamber

ventilation

Options:• DustProtector II• Installation kit for

underwater applications• Hydraulic compressor &

installation kit for tunnel applications

See also Parts and Services Catalogue:• Warranty extension

1+2 program• Working tools• Lubricants• Maintenance kits• Connection hoses

Medium hydraulic breakers MB 750

Carrierweightclass1) t 10-17

Serviceweight2) kg 750

Oilflow l/min 80-120

Operatingpressure bar 140-170

Impactrate bpm 370-840

Start-upmode AutoStart

Workingtooldiameter mm 100

Workinglengthoftool mm 550

Max.hydraulicinputpower kW 34

Soundpowerlevelguaranteed3) dB(A) 117

Soundpressurelevel(r=10m)3) dB(A) 88

Partnumber 3363100739

Equipped with DustProtector II

Workinglengthoftool mm 510

Partnumber 3363104681

115

MB 1000 MB 1200 MB 1500 MB 1700

12-21 15-26 17-29 19-32

1000 1200 1500 1700

85-130 100-140 120-155 130-170

160-180 160-180 160-180 160-180

350-750 340-680 330-680 320-640

AutoStart StartSelect™ StartSelect™ StartSelect™

110 120 135 140

570 610 630 650

39 42 46 51

119 117 120 117

90 88 91 87

3363088785 3363090441 3363099101 3363090449

540 585 605 620

3363088787 3363090443 3363099139 3363090451

3) Important:ENISO3744inaccordancewithdirective2000/14/EC.FulldetailsofmeasurementareavailableintheSafetyandOperatingInstructionoftheproduct.Itcanbefoundonwww.acprintshop.com

rig

-mo

un

te

d

br

ea

ke

rs

116

Applications:• Demoltion • Foundation work • Tunneling • Trenching • Underwater work• Boulder size reduction in

quarries• Blast-free mining

Features:• VibroSilenced Plus

system• ContiLube™ II• Energy Recovery• AutoControl • StartSelect™ • PowerAdapt • Percussion chamber

ventilation

Options:• DustProtector II• Installation kit for

underwater applications• Hydraulic compressor &

installation kit for tunnel applications

See also Parts and Services Catalogue:• Warranty extension

1+2 program• Working tools• Lubricants• Maintenance kits• Connection hoses

Heavy hydraulic breakers 2000-10000 kg


2) Breakerandbreakerboxwithstandardadapterplusworkingtool.

Heavy hydraulic breakers HB 2000 HB 2500 HB 3100

Carrierweightclass1) t 22-38 27-46 32-52

Serviceweight2) kg 2000 2500 3100

Oilflow l/min 150-190 170-220 210-270

Operatingpressure bar 160-180 160-180 160-180

Impactrate bpm 300-625 280-580 280-560

Workingtooldiameter mm 145 155 165

Workinglengthoftool mm 665 680 745

Max.hydraulicinputpower kW 57 66 81

Soundpowerlevelguaranteed3) dB(A) 120 121 119

Soundpressurelevel(r=10m)3) dB(A) 91 92 90

Partnumber 3363102761 3363092691 3363105651

Equipped with DustProtector II

Workinglengthoftool mm 600 640 700

Partnumber 3363104417 3363093871 3363105649

117

HB 3600 HB 4700 HB 5800 HB 7000 HB 10000

35-63 45-80 58-100 70-120 85-140

3600 4700 5800 7000 10000

240-300 260-360 310-390 360-450 450-530

160-180 160-180 160-180 160-180 160-180

280-560 280-540 280-480 280-450 250-380

170 190 200 210 240

770 860 865 935 -

90 108 117 135 159

121 126 121 121 123

92 96 92 92 93

3363100301 3363102751 3363090473 3363090481

720 800 810 885 880

3363100779 3363104461 3363090475 3363090483 3363100391

3) Important:ENISO3744inaccordancewithdirective2000/14/EC.FulldetailsofmeasurementareavailableintheSafetyandOperatingInstructionoftheproduct.Canbefoundonwww.acprintshop.com

rig

-mo

un

te

d

br

ea

ke

rs

118

Hydraulic compactors

Applications:• Trenchandsoilcompaction•Drivingsheetingandpilings•Extracting

Features:• Plugandplay–nospecialinstallationrequired• Integratedinputflowandpressurecontroltoprevent

overload• Flattopmountingbaseforversability• PracticallymaintanancefreethankstoPermanentLube,

thepermanentbearinglubricationdevice• Removeablebaseplate(fromHC920upwards)

Option:• Rotationkits(HC308–HC2041)

See also Parts and Services Catalogue:• Lubricants• Connectionhoses• Maintenancekits


Hydraulic compactors HC 103 HC 308

Carrierweightclass1) t 1-3 3-8

Serviceweight kg 160 320

Oilflowrate l/min 30 57

Operatingpressure bar 150 150

Vibratingforce t 1,4 2,3

Vibratingfrequency n/min 2100 2100

Baseplatesize(WxL) mm 346x678 475x693

Platecoverage m² 0,19 0,25

Height mm 486 623

Partnumber 1826101634 1826101635

119

HC 409 HC 920 HC 2040 HC 2041

4-9 9-20 20-40 20-40

430 880 1050 1055

76 114 151 189

150 150 150 150

3,6 7,3 10,5 11,4

2200 2200 2200 2200

610x929 710x1178 864x1136 864x1136

0,42 0,63 0,74 0,74

622 764 786 786

1826101636 1826101637 1826101638 1826101639

rig

-mo

un

te

d

co

mp

ac

to

rs

120

Silent demolition tools

Extremely robust designAtlas Copco combi cutters and pulverizers are designed for hard and long-term use with high throughput performance and loads. They can absorb high forces and constant stresses.

Hydraulic rotation 360° hydraulic drives for infinite rotation with overload protection are fitted as standard and provide excellent handling. The CC 250 is equipped with a mechanical rotation unit.

High speed valvesPowerful cylinders with speed valves offer high breaking forces with short cycle times, thus enabling rapid progress and high productivity.

Practical wear part conceptAll products are fitted with easy-to-replace wear parts which can be renewed on site using simple tools. This helps to minimize service and maintenance downtimes.

Two moving jaws conceptAtlas Copco combi cutters are equipped with the proven system of two moving jaws, each powerd by its own hydraulic cylinder. This offers constantly high breaking force over the entire breaking cycle.

CAPS (Coupling And Positioning System)Thanks to CAPS, the two cutter jaws of Atlas Copco combi cutters (from CC 1700 upwards) can be fitted and removed as a modular unit. CAPS connects the jaws even after they have been removed and facilitates refitting through a special guide system. This makes it easy to replace the jaws quickly on site.

121

rig

-mo

un

te

d

cu

tt

er

S

122

Scrap cutters

Applications:• Cutting metal structures (girders, sheets,

cables, rods)• Demolition work with mini-excavators or

demolition robots inside buildings and in con-taminated areas (chemical plants, atomic power plants)

Features:• High cutting force along entire blade length• 360° hydraulic rotation• Short opening and closing times• Solid, extremely resistant components• Replaceable blades

See also Parts and Services Catalogue:• Lubricants• Maintenance kits

1) Weightsapplytostandardcarriersonly.AnyvariancesmustbeagreedwithAtlasCopcoand/orthecarriermanufacturerpriortoattachment.Mountedonexcavatorstick.

2) Mountedonexcavatorboom.3) Withmedium-sizedadapter.

Scrap cutters SC 270 SC 600

Carrierweightclass1) t 4-5 5,5-6,5

Carrierweightclass1)2) t 2-3 3,5-4,5


Max.cuttingforce t 102 138

Cuttingforce,jawtip t 36 46

Oilflowrate l/min 60-100 90-120


Oilflowrate,rotation l/min max.15 max.20

Operatingpressure,rotation bar 100 100

Jawopening,max mm 185 245

Jawdepth mm 160 240

Bladelength mm 160 240

Partnumber 8460010010 3093040062

123

combi cutters240-920 kgApplications:• Light demolition work, e.g. narrow, lightly

reinforced concrete elements, masonry• Particularly effective for stripping out and

reconstructing interiors

Features:• Good performance-to-weight ratio• 360° rotation• Replaceable blades



2) Withmedium-sizedadapter3) Withmaxoilflow

U=WithuniversaljawsS=Withsteelcuttingjaws

Combi cutters CC 250 CC 650 CC 950 U



Cuttingforce,upperblades,max. t 66 - -

Cuttingforce,jawtip t - - -

Crushingforce,jawtip t 18 45 55

Oilflowrate l/min 30-50 90-180 90-180

Operatingpressure bar 200 350 350

Closingcycle3) s 2,9 3,4 -

Openingcycle3) s 2,2 2,6 -

Rotarydrive mech. hydr. hydr.

Oilflow,rotation,max. l/min - 25 25

Operatingpressure,rotation,max. bar - 210 210

Jawopening,max mm 360 450 650

Jawdepth mm 350 270 330

Bladelength mm 120 140 140

Partnumber 3093040002 3363104221 3363111949

rig

-mo

un

te

d

cu

tt

er

S

124



Applications:• Cutting of masonry and reinforced concrete• Reduction of steel and reinforcements

Features:• Short opening and closing times• 360° hydraulic rotation• Tandem cylinders• Replacable blades and teeth• Exchangeable jaws• Available with universal or steel cutting jaws• CAPS Coupling And Positioning System

See also Parts and Services Catalogue:• Bolt cage• Lubricants• Maintenance kits

combi cutters1900-2550 kg

Combi cutters CC 1700 U CC 1700 S



Cuttingforce,upperblades,max. t 225 225

Cuttingforce,jawtip t - 79

Crushingforce,jawtip t 57 -



Closingcycle3) s 1,6 1,6

Openingcycle3) s 1,7 1,7

Oilflow,rotation,max. l/min 30 30

Operatingpressure,rotation,max. bar 210 210


Jawdepth mm 615 430


Partnumber 3363093541 3363093551

EquippedwithContiLube™II 3363104201 3363104251

125

U=WithuniversaljawsS=Withsteelcuttingjaws

CC 2500 U CC 2500 S

22-35 22-35

2840 2550

370 370

- 130

90 -

150-250 150-250

350 350

2,9 2,9

3,1 3,1

30 30

170 170

860 400

725 460

350 380

3363093751 3363093201

rig

-mo

un

te

d

cu

tt

er

S

126



Applications:• Cutting of masonry and reinforced concrete• Reduction of steel and reinforcements

Features:• Short opening and closing times• 360° hydraulic rotation• Tandem cylinders• Replacable blades and teeth• Exchangeable jaws• Available with universal or steel cutting jaws• CAPS Coupling And Positioning System

See also Parts and Services Catalogue:• Bolt cage• Lubricants• Maintenance kits

combi cutters 3480-6300 kg

Combi cutters CC 3300 U CC 3300 S CC 3300 B



Cuttingforce,upperblades,max. t 510 510 510

Cuttingforce,jawtip t - 141 -

Crushingforce,jawtip t 109 - 145

Oilflowrate l/min 220-350 220-350 220-350

Operatingpressure bar 350 350 350

Closingcycle3) s 2,8 2,8 2,8

Openingcycle3) s 3,0 3,0 3,0

Oilflow,rotation,max. l/min 30 30 30

Operatingpressure,rotation,max. bar 170 170 170

Jawopening,max mm 1000 440 570

Jawdepth mm 765 625 660

Bladelength mm 525 525 705

Partnumber 3363087620 3363087621 3363100101

127

U=WithuniversaljawsS=WithsteelcuttingjawsB=Withboxshapejaws

CC 4700 U CC 4700 S CC 6000 U CC 6000 S

45-65 45-65 58-85 58-85

4750 4500 6500 6300

620 620 830 830

- 198 - 205

155 - 180 -

350-450 350-450 450-550 450-550

350 350 350 350

3,2 3,2 4,0 4,0

3,7 3,7 4,0 4,0

50 50 50 50

170 170 170 170

1300 710 1400 750

1080 860 1150 900

525 875 525 875

3363097101 3363097103 3363099501 3363099503 rig

-mo

un

te

d

cu

tt

er

S

128

demolition pulverizers

Applications:• Primary demolition of reinforced concrete

structures• Secondary reduction and separation

Features:• 360° hydraulic rotation drive• Short opening and closing times• Replaceable blades, teeth and tooth plates




Demolition pulverizers DP 2000 DP 2800




Crushingforce,jawtip t 85 100



Closingcycle3) s 4 4

Openingcycle3) s 4 4

Oilflowrate,rotation l/min 20-30 20-30

Operatingpressure,rotation bar 210 170

Jawwidth mm 460 480


Jawdepth mm 650 930


Demolitiontoothplate 3363098264 3363098202

Partnumber 3363097401 3363092501

129

Bulk pulverizers

Applications:• Secondary reduction and separation• Secondary demolition of reinforced

concrete structures• Separation of concrete and rebar

Features:• Wide jaw• Short opening and closing times• 360° hydraulic rotation drive*




*) Non-rotating versions are also available. Please contact your Atlas Copco sales representative for further information

Bulk pulverizers BP 2100 BP 2900




Crushingforce,jawtip t 80 114



Closingcycle3) s 4 4

Openingcycle3) s 4 4


Operatingpressure,rotation

bar 170 170

Jawwidth mm 470 480


Jawdepth mm 800 870


Recyclingtoothplate 3363098965 3363098966

Partnumber 3363096901 3363099601 rig

-mo

un

te

d

cu

tt

er

S

130

Applications:• Demolition (masonry, wooden

structures)• Sorting and loading

Features:• 360° hydraulic rotary drive• Grapple and wear parts made of carbon steel• High grapple capacity• Replaceable blades


multi grapples


2) Withmedium-sizedadapter,withoutextrablades

Multi grapples MG 1000 MG 1500



Max.closingforce t 4,7 6,9




Operatingpressure,rotation bar 150-210 150-210

Capacity l 500 800

Jawopening mm 1950 2100

Grapplewidth mm 800 1000

Partnumber 3363098222 3363098223

Multi grapples MG 100 MG 200

Carrierweightclass1) t 0,7-1 1-3


Max.closingforce t 0,6 1,5




Operatingpressure,rotation bar 120-150 120-150

Capacity l 30 70

Jawopening mm 600 750

Grapplewidth mm 300 450

Partnumber 3363103650 3363103651

131

MG 1800 MG 2100 MG 2700 MG 5000

20-28 25-35 28-50 50-80

1780 2100 2710 5300

6,9 8,5 9,2 13

130-180 180-200 160-220 300-350

350 350 350 350

30-35 30-35 30-35 50-60

150-210 150-210 150-210 210-250

850 900 1000 1600

2100 2200 2200 3000

1200 1200 1200 1500

3363098224 3363103654 3363098225 3363103655

MG 300 MG 400 MG 500 MG 800

2-5 4-8 5-9 9-16

290 450 460 825

2,0 2,3 2,4 3,8

20-40 35-40 35-50 70-100

300 300 300 350

5-10 10-15 10-15 20-25

120-150 120-150 120-150 150-210

100 150 200 400

1100 1400 1500 1700

500 600 700 800

3363103652 3363103653 3363098220 3363098221

rig

-mo

un

te

d

cu

tt

er

S

132

Your choice for minimized lifecycle cost

Atlas Copco consumables and wear parts are the right choice when maximum output and low lifecycle cost are in focus of your daily work.

All Atlas Copco Customer Centers and their network of distributors offer a wide range of wear parts and consumables. The staff is trained to support with advice and technical assistance to get the right parts for every application.

Increased productivityOnly genuine parts fit exactly to the stresses that an Atlas Copco product causes on it´s components. And only original parts enable the owner to minimize downtime and to protect the investment. Only a working machine can contribute to productivity of your company. Let it work!

Low lifecycle costTwo thirds of the total cost of a machine is operating cost. The purchase price is only one third of the total lifecycle cost. Why not focusing on the more costly part when it comes to a purchase decision?

For example: a smaller breaker on a smaller carrier with a clever maintenance concept and – of course – reliable and robust consumables: that´s the recipe for your success.

pa

rt

s a

nd

se

rv

ice

s

133

parts and servicesFollowing pages represent our basic program of lubricants, accessories and consumables.

For the full program and information please see our Parts and Services catalogue (Part number 3390 0650)

134

Breaker and hammer AIR-OIL Part number

0,25 l 8099 0202 40

1 l 8099 0202 36

5 l 8099 0202 02

20 x 1 l 8099 0202 81

4 x 5 l 8099 0202 85

Rock Drill AIR-OIL Part number

1 l 8099 0201 01

4 l 8099 0201 04

10 l 8099 0201 10

208 l barrel 8099 0201 28

12 x 1 l 8099 0201 81

4 x 4 l 8099 0201 84

Cobra & Compactor IMPACT-OIL Part number

1 l 9234 0012 03

20 x 1 l 9234 0014 05

Power Pack BIO-OIL Part number

4 l 3371 8077 51

Lubricants

2-stroke OIL Part number

1 l 8099 0202 40

12 x 1 l 8099 0202 36

Chisel paste Part number

12 x 500 g 3363 0912 00

15 kg 3362 2639 00

pa

rt

s a

nd

se

rv

ice

s

135

Floating discs

Fits to trowel BG240 BG CombiBG370/

BGCombiBG370/

BGCombiBGCombi

Diameter mm 610 865 945 945 1015

Comment 3 mm thick

Pcs/ pack 1 1 1 1 1

Part number 4700 0330 81 4700 0323 97 4700 0319 37 4700 0330 36 4700 0324 73

Floating blades

Fits to trowel BG370 BG470

Pcs/ pack 1 1

Part number 4700 0326 59 4700 0117 58

Trowel blades

Fits to trowel BG240BG370 /

BGCombiBG370 /

BGCombiBG470

Blade arm type Bolt-on Quick-Release Bolt-on Bolt-on

Comment

Pcs/ pack 4 4 1 1

Part number 4700 0489 68 4700 0022 55 4700 0489 37 4700 0218 88

Fits to trowel BGCombi BGCombi BG240 BG370/BG470

Type Protection Ring Protection RingSet of transport

wheelsSet of transport

wheels

Pcs/ pack 1 1 2 2

Diameter mm 850 1020

Part number 3382 0105 70 3382 0105 71 3382 0105 72 3382 0105 73

consumables for power trowels

accessories for power trowels

136

accessories for handheld pneumatic equipment

X-LITE customized hoses with individual text, package of 10 rolls (10 x 60 m)

ColourInner

diameterMax. working

pressurePart number

mm bar

Yellow 20 20 9030 2114 90

Red 20 20 9030 2114 95

White 20 20 9030 2114 94

Round rubber hoses, 30 m length

Inner diameter

Outer diameter mm Part number

mm mm

12,5 22 9030 2038 00

20,0 30 9030 2040 00

25,0 36 9030 2041 00

X-LITE Hose rolls

Inner diameter

Max. working pressure

Length Part number

mm bar m

20 20 60 9030 2114 00

25 20 60 9030 2106 00

X-LITE Pre-mounted hoses

Inner diameter

Max. working pressure

Length Part number

mm bar m

20 20 20 9030 2115 00

25 20 20 9030 2111 00

Claw couplings

Hose inner diameter

Bore Weight Part number

mm mm kg

20 17,2 0,15 9000 0312 00

25 22 0,17 9000 0313 00

pa

rt

s a

nd

se

rv

ice

s

137

VAM water separators

BLG/CLG lubricators

1) US type also available. Please contact your Atlas Copco sales representative for further information.

1) US type also available. Please contact your Atlas Copco sales representative for further information.

Water separators

Hose connection

Air flowPart number

European type1)

mm I/s

VAM 01 20 50 8092 0110 58

VAM 5A 25 120 8092 0110 82

Max. working pressure 8 bar

Lubr

icat

ors

Hos

e in

ner d

iam

eter

Air

flo

w

Oil

volu

me

Wei

ght

Part

num

ber

Euro

pean

type

1)

mm l/s l kg

CLG 10, for both mineral and synthetic oil

25 8-15 1,3 3 8202 5101 23

CLG 30, for both mineral and synthetic oil

25 15-140 1,3 3 8202 5102 39

BLG 30, for mineral oil

25 15-140 1,3 3 8202 5102 05

Max. working pressure 20 bar

138

Oil flow divider

Max. oil flow rate

Regulated oil flow rate

EHTMA class

Part number

l/min l/min

LFD 20 60 20-25 C 1801 1632 29

LFD 30 120 25-38 D 1801 1642 32

Post driver adaptors Part number

Universal adaptor 3371 8060 33

Round adaptor 96 mm 3371 8060 34

Square adaptor 54 mm 3371 8060 32

Lever kit for post puller Weight Part number

LPP 10 HD lever kit 10 kg 3371 8101 48

Auger Length Part number

Ø mm mm

90 870 3378 0050 45

150 870 3378 0050 46

200 870 3378 0050 44

250 870 3378 0050 47

280 870 3378 0050 49

350 870 3378 0050 48

Hydraulic extension hose

Coupling EHTMA class Part number

7 m 1/2 " C/D 3371 8010 87

12 m 1/2 " C/D 3371 8010 89

Extension rod Length Weight Part number

mm kg

Extension rod 500 5 3378 0050 55

accessories for handheld hydraulic equipment

pa

rt

s a

nd

se

rv

ice

s

139

Diamond core bits

Diamond discsConcrete and asphalt diamond discs for 14 inch and 16 inch cut-off saw

Description Blade size Arbor hole diameter Part number

mm mm

Concrete diamond disc 355 25,4 3378 0050 57

Concrete diamond disc 405 25,4 3371 8097 27

Asphalt diamond disc 355 25,4 3378 0050 58

Asphalt diamond disc 405 25,4 3371 8097 26

Core bit size Length Part number

mm mm

Ø 62 450 3378 0050 61

Ø 82 450 3378 0050 62

Ø 102 450 3378 0050 63

Ø 112 450 3378 0050 64

Ø 132 450 3378 0050 65

Ø 152 450 3378 0050 66

Ø 162 450 3378 0050 67

Ø 200 450 3378 0050 68

Water kit for core drill and cut-off saw

Size Water volume

Weight Part number

mm l kg

220x620x250 10 8 3371 8090 02

LSC Cart1) for 14 and 16 inch cut-off saw

1) including water kit

Weight Part number

25 kg 1809 0010 01

140

Bolt cage for hydraulic cuttersThe bolt cage allows cutter jaws to be replaced rapidly. It simplifies handling on site and shortens change-over times. CC combi cutters Part number

CC 1700 U / CC 1700 S 3363 0946 47

CC 2500 U / CC 2500 S 3363 0945 42

CC 3300 U / CC 3300 S 3363 0946 48

Service boxes for hydraulic breakers

Description Remarks Part number

Service box No. I with nitrogen cylinder 2 l 3363 0898 44

Service box No. II with nitrogen cylinder 5 l 3363 0898 45

Service box No. III without nitrogen cylinder 3363 0949 40

Cobra & Compactor IMPACT-OILFor hydraulic compactors

Chisel pasteFor hydraulic breakers

High Performance GreaseFor hydraulic cutters, pulverizers and grapples

1) for use with ContiLube™ II

Size Part number

12 x 400 g 3363 0949 13

12 x 500 g1) 3363 0912 00

15 kg 3362 2639 00

45 kg 3362 2632 75

Size Part number

12 x 400 g 3363 0949 14

Size Part number

1 l 9234 0012 03

20 x 1 l 9234 0014 05

accessories for hydraulic attachments

pa

rt

s a

nd

se

rv

ice

s

24 months

141

atlas copco 1+2 program: extended warranty for hydraulic breakers

For hydraulic breakers, two years additional warranty are provided free of charge. The pre requisite for a warranty extension is that you register your breaker on the internet within 4 weeks of initial start-up. The warranty period begins on the date of purchase.

Features:• Three years warranty period • Unlimited operating hours • Extension period covers the warranty risk • Covers main components, including the piston

Benefits:• Protected investment and peace of mind – free of

charge• Time to focus on your business • Improved breaker availability• Higher resale value

Register at www.1plus2program.com

Basic warranty

Maintenance according to the operating instructions, at least one inspection per 12 months or not later than after each 500 operating hours – whatever is earlier.

36 months

12 months

“Standard Warranty” ”Standard scope of Warranty”

142

To convert from Into Multiply by

acres sq meters 4,047

bar pounds/sq in 14,504

Celsius (°C) Fahrenheit (°C x 9/5) + 32

centimeters inches 0,3937

cubic centimeters cu inches 0,06102

cubic feet cu meters 0,02832

cubic feet liters 28,32

cubic ft/min cu meter/min 0,02831

cubic inches cu centimeters 16,3872

cubic meters cu feet 35,31

cubic meters cu yards 1,308

cubic yards cu meters 0,7646

cubic yards liters 764,6

feet meters 0,3048

feet millimeters 304,8

feet/min meters/min 0,3048

Fahrenheit (°F) Celsius (°F-32) x 5/9

gallons (U.S.) liters 3,785

gallons/min liters/sec 0,063

Hertz vibrations/min 60

horsepower, metric horsepower 0,9863

horsepower horsepower, metric 1,014

inches centimeters 2,54

inches millimeters 25,4

kilograms pounds 2,205

kilograms tons (long) 0,0011023

kilograms tons (short) 0,0009842

kilograms (force) Newtons 9,807

kilograms/cm pounds/in 5,60

kilograms/cu.m lb/cu ft 0,0624

kilograms/cu.m lb/cu yd 1,6856

kilograms/sq cm lb/sq in 14,22

kilograms/sq m lb/sq ft 0,02048

kilometers miles 0,6214

kilometers/hr miles/hr 0,6214

kilometers feet 3,209

kilopascals (kPa) pounds/sq in 0,145

kpm lb ft 7,233

liters cu ft 0,035

liters gal (U.S. liq) 0,264

liters qts (U.S. liq) 1,057

Megapascals (MPa) pounds/sq in 145,04

meters feet 3,281

meters inches 39,37

Metric/U.S. Conversion Table

143

To convert from Into Multiply by

meters miles (statute) 0,0006214

meters yards 1,094

meters/min feet/min 3,281

miles (statute) kilometers 1,609

miles (statute) meters 1,609

miles/hr kms/hr 1,609

millimeters inches 0,03937

millimeters feet 0,0033

Newtons pounds (force) 0,225

Newtons kilograms (force) 0,102

Newton meters (Nm) pounds-inches 8,8507

Newton meters (Nm) pound-feet 0,7376

pints (liq) liters 0,473

pounds kilograms 0,4536

pound-feet KPM 0,1383

pound-feet Newton meters (Nm) 1,3556

pounds (force) Newtons 4,448

pound-inches Newton meters (Nm) 0,1130

pounds/in kilograms/cm 0,1786

pounds/cu yd kg/cu meter 0,55955

pounds/sq in bar 0,06895

pounds/sq in kg/sq cm 0,0703

pounds/sq in kilopascals (kPa) 6,895

pounds/sq in megapascals (MPa) 0,006895

quarts (liq) liters 0,9463

rod meters 5,029

sq centimeters sq inches 0,155

sq feet sq meters 0,0929

sq feet sq yards 0,1111

sq inches sq cms 6,452

sq kilometers sq miles 0,3861

sq meters sq feet 10,76

sq meters sq yards 1,196

sq miles sq kms 2,59

sq millimeters sq inches 0,00155

sq yds sq meters 0,8361

Temperature Celsius (°C) (°F-32) x 5/9

tons (long) tons (short) 1,016

tons (metric) kilograms 1,000

tons (metric) pounds 2,205

tons (short) kilograms 907,18

tons (short) tons (metric) 0,9078

vibrations/min Hertz 0,0167

yards meters 0,9144

www.atlascopco.com

Sub

ject

to

tech

nica

l mod

ifica

tions

.

Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability

© 2

011

Atla

s C

opco

Con

stru

ctio

n To

ols

AB

, Sto

ckho

lm, S

wed

en.

9800

125

1 01

Date post:	05-Apr-2016
Category:	Documents
Upload:	arctic-import
View:	266 times
Download:	3 times

Atlas%20copco%20facts%20book

Documents