Timesaver 852.4CB 3-Head WideBelt Cross Belt Sander W/Sensing
CMS NC-TRIAX-PF-1.R8RR SingleTable CNC Router
Pneumafil 11.5-316-8 Dust Collector
CMS PF102R4CURR Twin TableCNC Router W/ATC
Wemhoner KT-M34/15V-300 ShuttleStyle Membrane Hot Press & Boiler
Ingersoll Rand SSR-EP100 100HPAir Compressor
DuBois 54” Reverse Roll Coater
Torwegge Veneer Jointer
Technolegno TG2800 Dbl. SidedProfile Shaper/Sander
Heesemann KSA4 3-Head WideBelt Sander W/Cross Sanding
Technolegno TG280/2 Dbl. End Tenoner
Schelling FW330330 CNC Panel Saw
Diehl SL-52 Wide Arm StraightLine Rip Saw
Technolegno Dbl. Sided ProfileShaper/Sander
Sandingmaster SCSB2-1300 2-Head Wide Belt Sander
Mereen Johnson 640 Dbl. End Tenoner
AEM 52” 2-Head Wide Belt SanderW/Cross Sanding
AUCTION!AUCTION!
®
PH: 717-854-0316 FX: 717-843-7826
INDUSTRIAL RECOVERY SERVICES, INC.P.O. Box 5086 • York, PA 17405
United PlywoodIndustries Inc.United Plywood Industries, Inc. closes itsMocksville, NC plant!
September 12th
Featured Items!
Large Quantity of Maintenance Room Supplies! Portable & Hand Tools! Particle Board, MDF & Veneer! Diamond & Carbide Tooling, Shaper Cutters, Profile Cutters! Office Equipment! And More!
1996! 1995!
1990!1996!
OnlineOnly!
www.irsAuctions.com
Air Compressors & Dryers • Bandsaws • Boilers • CNCRouters • Combination Machines • Conveyors • DrillPresses • Dust Collection • Edge Sanders •Edgebanders • Finishing Equipment • Forklifts • GlueSpreaders • Grinders • Jointers • Lumber • MaintenanceEquipment • Material Handling • Misc. Sanders •Miscellaneous Equipment • Office Equipment •Packaging Equipment • Pallet Jacks • Pallet Racking •Panel Cleaners • Panel Saws • Planers Link • Portable& Hand Tools • Presses • Roll Coaters • Shapers •Straight Line Rip Saws • Tenoners • Tooling • Upcut &Hydracut Saws • Veneer Machinery • WeldingEquipment • Wide Belt Sanders
217Lots!
• Wemhoner KT-M34/15V-300 Shuttle Style Membrane Hot Press(1995) & Boiler; 60” x 11’ heated platen, (5) 6” diameter hydrauliccylinders, (2) 60” x 15’ belt conveyors, 64” x 139” shuttle table. HeatelHCS 50G nature gas boiler, MAWP 150 psig # 600°F
• CMS PF102R4CURR Twin Table CNC Router W/ATC (1996); (4)routing spindles, (2) with automatic tool change, (1) with C-axis, (2)with nut & collet, 61” x 121” X/Y travel (full 5 x 10 capability)
• CMS NC-TRIAX-PF-1.R8RR Single Table CNC Router (1988); 49-1/2” x 99-1/2” table, 2-zone capability, (8) turret routing heads – (1) tur-ret 7-position 32mm boring head
• CMS NC.TRIAX.P.F.4T CNC Router (1986); 49-1/2” x 99-1/2” singletable, 2-zone capability, (4) routing heads – 5.5hp, 12000-18000 rpm
• Schelling FW330330 CNC Panel Saw (1988); 10’ capacity, (3) airflotation tables 22-1/2” x 80” each
• Diehl SL-52 Straight Line Rip Saw; Approx. 15-20hp, 89” x 78” table,Wide arm, 48” throat
• Dri-Quik Infrared Oven; Approx. 5hp, 40” x 56” infeed conveyor, 36” x 32’ full length belt conveyor
• Technolegno TG280/2 Dbl. End Tenoner (1990); 60” width cap., 6”load space
• Technolegno TG2800 Dbl. Sided Profile Shaper/Sander (1996);60” width cap., 50” load space
• Timesaver 852.4CB 3-Head Wide Belt Cross Belt SanderW/Sensing; 52” wide vacuum bed, 32” load space, Sensing – spaced1-1/2”, 6” wide x 215” cross belt, 2nd head – contact, platen w/sens-ing, 25hp, 3rd head – contact, platen w/sensing, 20hp, 4th head – con-tact, platen w/sensing, 20hp
• AEM 52” 2-Head Wide Belt Sander W/Cross Sanding: 52” cap.Vacuum bed, Cross belt 6” wide, 20/10hp, 460v motor, 24” load space,2nd head: combination, 20/10hp, 460v motor, 3rd head – platen,15/7.5hp, 460v motor
• Ingersoll Rand SSR-EP100 100HP Air Compressor; 446 cfm cap.• Ingersoll Rand SSR-EP50SE 50HP Air Compressor; 194 cfm cap.• Ingersoll Rand TM400TE4 Thermal Mass Compressed Air Dryer
(1994); Max. inlet air pressure 250 psig• Torit TD-2300-255 Dust Collector; 5HP, (12) 12” x 24” bags• Sandingmaster SCSB2-1300 2-Head Wide Belt Sander;
50” capacity• Heesemann KSA4 2-Head Wide Belt Sander W/Cross Sanding
(1986); Width: 65-1/2” Loading space: approx. 24” Cap. 63” x 3”,Sensing for veneer sanding, (1) Cross belt stroke & (2) platen heads
• Pneumafil 11.5-316-8 Dust Collector; (1) Carolina blower, 75hp,230/460v, 3ph, 29” inlet