AUCTION SALE TO BE HELD ONSITE & ONLINE...2018/03/13 · 2 j) to appropriate any moneys received...

FORKLIFT AVAILABLE ONSITE UNTIL 12PM WEDNESDAY 21ST MARCH 2018

LIQUIDATION AUCTION - LEADING POLYSTYRENE &

URETHANE MANUFACTURING BUSINESS WITH

RECYCLING SYSTEMS, INJECTION MOULDING & VEHICLE FLEET

AUCTION SALE TO BE HELD ONSITE & ONLINE

UNITS 3, 4 AND 5, 91 DARLINGTON DRIVE, YATALA QLD 4207

THURSDAY 15TH MARCH 2018 FROM 10AM AEST

AUCTION CATALOGUE

UNDER INSTRUCTIONS FROM:

HAMMER PRICE IS GST EXCLUSIVE

SOME LOTS MAY BE SUBJECT TO REDEMPTION

ENQUIRIES: PATRICK SYMONS 0416 151 506

ALL LOTS MUST BE REMOVED BY 4PM WEDNESDAY 21ST MARCH 2018

$100 CASH DEPOSIT REQUIRED ON REGISTRATION

NOTES: A BUYERS PREMIUM OF 13.5% + GST WILL APPLY TO ALL LOTS SOLD

IN THE MATTER OF: AUSTRALIAN URETHANE SYSTEMS PTY LTD (ADMINISTRATORS APPOINTED)

EVERYTHING MUST BE SOLD!

INSPECTION: WEDNESDAY 14TH MARCH 2018 FROM 8AM-4PM AND DAY OF SALE FROM 8AM AEST

1

TERMS AND CONDITIONS OF SALE

1 The purchaser acknowledges that all sales conducted by the auctioneer are on the basis of being “GST” exclusive, and as such a GST amount of 10% (or whatever prescribed amount is in force by legislation) will be added to the bid price. Further, the purchaser acknowledges and agrees that in the absence of advice to the contrary, that all bids by the purchaser will be deemed to be exclusive of GST and that GST will be added to the bid price of all lots.

2 The purchaser acknowledges that all sales conducted by the auctioneer, that a buyer’s

premium may be charged on the bid price. 3 As soon as practicable after the fall of the hammer the Purchaser shall sign the

agreement (if any) for sale. 4 The Purchaser shall be deemed to purchase as principal unless prior to the sale –

a) The purchaser shall have disclosed to the Auctioneer that he will be bidding on behalf of a principal and shall supply the full name and address of his principal; and

b) The purchaser has given to the auctioneer a copy of written authority to bid for or on behalf of a person.

5 The Auctioneer and Vendor reserve the following rights which may be exercised by the

Auctioneer without giving any reason therefore –

a) to withdraw any lots from the sale;

b) not to offer for sale part only of any lot described in the catalogue;

c) to offer two (2) or more of the lots described in the catalogue as separate lots for sale together as one (1) lot;

d) should such lots referred to in c) of this condition not be knocked down under the hammer to a successful bidder, to offer such lots as separate lots;

e) to refuse to accept a bid or bids from any person or persons which in the opinion of the Auctioneer is not in the best interest of the Vendor;

f) to refuse admission to/or eject from the selling place any person or persons;

g) to refuse to accept any bid for a lot being less than a sum nominated from time to time by the Auctioneer;

h) to keep secret the existence and amount of the reserve price (if any) of a lot prior to the close of bidding or withdrawal from sale of the lot;

i) in the event that the Purchaser shall successfully bid for more than one lot at the auction;

2

j) to appropriate any moneys received from that Purchaser in satisfaction or partial

satisfaction of the purchase price (and any taxes, if applicable) due in respect of any one or more of such lots to the total of partial exclusion of amounts due in respect of any other such lot or lots as the Auctioneer shall see fit;

k) to elect at any time to treat each contract for the sale of each such lot as interdependent with each other such contract or contracts and default under any such contract shall be treated as default under all such contracts;

l) to bid on behalf of any vendor, prospective Purchaser or Purchaser’s with or without disclosure; and

m) in the event that any lot is not sold at the auction to offer to sell same thereafter by private treaty but otherwise subject to these conditions.

6 The Vendor or any person on his behalf reserves the right to bid at the auction in respect

to any lot. The Vendor acknowledges that for any successful bids he/she shall still be liable for the payment of any relevant commissions.

7 Any bidder shall give his full name and residential address at the time of registering to

bid or when called upon to do so by the Auctioneer and –

a) Prior to the end of the auction or at any time thereafter specified by the Auctioneer the Purchaser shall pay to Auctioneer the full price for the lot, plus any GST, license fee or any other government charge applicable to the goods.

b) The Auctioneer at his discretion may require immediate payment or part payment for a lot.

c) The purchase price and, where applicable, any part payment thereof, and GST shall be paid in either cash, bank cheque, credit card or bank transfer

d) Any balance of the purchase price for a lot shall be paid to the Auctioneer no later than the expiration of the period during which the Purchaser is required by the conditions to take delivery of the lot and he shall not be entitled to require delivery until the purchase price and, where applicable, GST, license fee or government charge shall have been paid in full; and

e) Time shall be of the essence in relation to the interpretation and observance of these conditions.

8 On the fall of the hammer, the Auctioneer may require and the Purchaser shall pay a

deposit in cash of twenty five percent (25%) in part payment of the purchase price for the lots purchased by the Purchaser. In default, the lot or lots so purchased may at the absolute discretion of the Auctioneer be immediately re-offered for sale and re-sold.

3

9 No error in description or deficiency in quantity shall void the sale and the Purchaser

shall be bound to take the delivery of the lot without any allowance or abatement in price. Any warranties which might otherwise be implied by the Sale of Goods Act, 1923, are hereby excluded and shall not apply. The Auctioneer and the Vendor make no warranties other than those implied by Common Law or by statute the exclusion of which warranty would render this condition void or voidable or which would constitute an offence by the auctioneer or the Vendor. Intending bidders must satisfy themselves by inspection or otherwise as to the nature of the lot or lots offered for sale and must accept same with all fault, patent or latent (if any). Furthermore, no warranty shall be implied from any affirmation made at the auction or otherwise but in all cases where an express warranty is intended, the same shall only be enforceable of reduced to writing and signed by the Vendor or by the Auctioneer as agent for the Vendor.

10 At the absolute discretion of the auctioneer, he may accept payment by way of personal

or company cheque. Should the above occur title does not pass and delivery will not occur until any cheque received in payment has been honoured and paid.

11 Each lot shall lie at the purchaser’s risk from the fall of the hammer and neither the

auctioneer nor the Vendor shall be accountable for any deficiency, damage or loss which may arise thereafter. The property in such lot shall not pass until payment in the approved manner as advertised at the auction in full of the purchase price and, where applicable, GST, license fee or government charges.

12 No lot shall be removed during the sale without the consent of the auctioneer, but

subject to condition 10 hereof, delivery is to be taken and the lot removed by the Purchaser within one (1) full working day of the day of the auction or such other period of time as may be specified by the Auctioneer at the time of sale and, in this respect, time is of the essence. Any removal shall be at the expense and risk of the Purchaser but, in such removal, the Purchaser shall do no damage, or shall forthwith make good any damage, which may be occasioned. Any lot or part thereof which the Purchaser does not remove may thereafter be removed by the Auctioneer or by some person, firm or company engaged by the Auctioneer or the Vendor and/or stored at the place at which the auction took place or elsewhere by the Auctioneer or by some person, firm or company engaged by the Auctioneer. Such removal and/or storage shall be deemed to have been made by the Auctioneer at the request of the Purchaser and all costs incurred by the Auctioneer or the Vendor in relation thereto together with an amount of $10.00 plus GST per lot per day (inc. weekends) penalty shall be immediately payable by the Purchaser to the Auctioneer and the Auctioneer may sue for and recover the same as liquidated damages.

13 In addition to the purchase price, the Purchaser shall pay to the Auctioneer a fee calculated at the rate of up to thirteen and a half per cent (13.5%) of the full purchase price excluding GST State or Federal taxes that may be applicable.

4

14 If the Purchaser shall default in the observance or performance of his obligation under

these conditions or any one or more of the then any moneys which the Purchaser shall have paid to the Auctioneer shall be absolutely forfeited and, without notice to the Purchaser, such lot or lots may be re-sold either by public auction or private contract and upon such terms and conditions as either the Auctioneer or the Vendor shall deem fit at the risk and expense of the Purchaser who shall be liable for any deficiency together with all expenses of removal, commission, warehousing and other charges arising out of such default and the Auctioneer or the Vendor shall be entitled to recover same as and for liquidated damages. Without limiting the generality of the foregoing, the Auctioneer shall be entitled to recover from the purchaser -

a) the amount of any commission upon the purchase which the Purchaser did not

complete, the commission being determined by the agreement between the parties;

b) such sum for expenses and charges incurred by the Auctioneer in connection with or incidental to the auction and in respect of any such re-sale; and

c) where applicable, any GST, value added tax or any other tax relating to or arising from the sale of the property or any part thereof of the Vendor.

15 Furthermore, the purchaser shall take or cause to be taken all reasonable and proper

steps so far as is reasonably practicable in order to ensure that, the lot or lots purchased shall be safe and without risks to health when properly used.

16 In these Conditions the word “Auctioneer” means Hymans Asset Management Pty

Limited or any member of the Hymans Group (as determined by the originating office) except that where the context so permits it shall include the persons actually conducting the auction on behalf of Hymans Asset Management Pty Limited.

17 In these Terms and Conditions the word “Purchaser” refers to the registered bidder.

NOTES FOR REGISTERED BIDDERS

The following notes for registered bidders are supplementary to the above noted Terms and Conditions of Sale and are only intended to assist bidders in properly and conveniently affecting their purchases. Special Notes - A buyer’s premium of 13.5% + GST will apply on all lots sold. The hammer price of all lots is GST exclusive and as such, GST of 10%

will be added to the bid price and buyer’s premium. Example: Bid Price: $100.00 Plus Buyer’s Premium: $ 13.50 Sub-total: $113.50 Plus GST: $ 11.35 Invoice Total: $124.85

5

Site Management - The site Manager and contact details for this auction is: Jenn Baddams 0416 151 509 James Rouse 0424 199 604 Registration - Buyers must register prior to bidding and obtain a bidder card from the

auctioneer’s clerk immediately upon entry to the auction premises. Deposits - A deposit of $100.00 is required at registration. The deposit will be

immediately refunded in full if no lots are purchased by the buyer. If a buyer makes substantial purchases (to be determined by the

auctioneer) a deposit of between 10% and 20% will be required prior to the conclusion of the auction.

Payment Options - Payment of invoices is required in either cash, bank cheque, Visa,

MasterCard, Bankcard or EFTPOS only. Please note that a 1.12% surcharge will be applied to all credit card payments.

Company and personal cheques will be NOT accepted unless

arranged prior to the auction with the auctioneers. Direct deposit to the auctioneer’s trust account is also available. Account

details are as follows: Bank: ANZ

Account Name: Hymans Asset Management – QLD Trust Account

BSB: 014 002

Account Number: 836 542 918 Company Cheques - A letter of reference must be obtained PRIOR TO THE AUCTION from

your bank as a general reference in respect to your credit worthiness. This reference need not be in specific terms but must state that in the normal course of business you have not been known to extend your accommodation. Failing to supply this reference will lead us to insist in payment in one of the other manners mentioned above.

Insurance - The bidder is at risk on the fall of the hammer on each lot and is therefore

strongly advised to effect insurance immediately. Neither the auctioneer nor the vendor will be held responsible for any loss or damage to any lot after the fall of the hammer and buyers should be aware of the other terms affecting the sale that may preclude them from taking delivery of their lots immediately upon the fall of the hammer.

Transfer of Title - Title shall only pass at such time that accounts are fully paid.

6

Collection of Lots - Full payment must be made before any goods will be released.

Removal of goods will occur at the following times: From the conclusion of the auction sale to 4:00pm

Friday 16th March 8am to 4:00pm

Monday 19th March 8am to 4:00pm

Tuesday 20th March 8am to 4:00pm

Wednesday 21st March 8am to 4:00pm

Equipment that requires disconnection from water, electricity, gas or other such services is at the expense of the purchaser and disconnection work must be carried out by a GOLD LICENCE trade person. The licence must be presented prior to the commencement of works. Disconnection must be completed carefully and left in a neat manner. Lots 63, 71, 72, 75, 76, 118 require a licensed electrician and plumber for disconnection at buyers’ expense. Lots 73, 118, 120, 156, 159, 160, 162 require a licensed electrician for disconnection at buyers’ expense. All removal work will be inspected to ensure it complies with the above. If we are not satisfied with the removal work, we reserve the right to request further work be carried out or undertake rectification work ourselves which will be charged to the Purchaser. The forklifts at lot 195, 197 & 199 are required to remain onsite until the last day of collection to facilitate removal. The buyer of these lots must arrange collection at 4pm AEST Friday 23rd March 2018. Please note there will be a pedestrian forklift available for loading of general items. The forklift will be available from the conclusion of the auction sale to 12pm AEST Wednesday 21st March 2018. The forklift may only be operated by approved, credentialed buyers. Forklift users must show the Hymans team their credentials (i.e. current forklift licence) before commencing operation of the forklift. By agreeing to these terms and conditions any buyer or representative of the buyer who damages the forklift or damages other property while operating the forklift is responsible for paying for those damages. Hymans does not supply forklift drivers.

Payment will only be accepted from and delivery given to the Purchaser of the lots at the auction sale. Any transfer of lots between buyers can only occur after the lots have been removed from the site by the Purchaser at the auction sale.

7

Absentee Bids - Absentee bids may be left with the auctioneer’s clerk by way of the Absentee’s Bidding Form which is attached herein or can be obtained from the auctioneer’s clerk.

First Right of Refusal - During the sale, we may offer the highest bidder “first right of refusal”

over similar lots. For example, if there are ten identical units, the highest bidder on the first unit may choose to take one or all ten at the initial hammer price. Live simulcast bidders – watch the chat box to find out more. If the highest bidder chooses to take multiple lots, they will be sold to the highest bidder and will not be offered individually.

Mixed Lots - Any buyer who purchases a mixed lot, a scrap lot, an “allowance for

items”, or “contents”, is responsible for the removal of all items within the scope of that lot. Any remaining items left onsite will be disposed of at the expense of the buyer.

Stock - Please note that items described as “stock” or “consumables” must be

inspected by the buyer for suitability and are purchased at the buyer’s risk.

8

RISK KEY CODE

Purchasers are required to carefully assess all possible risks associated with the operation of the asset in line with but not limited to, the following schedule of identifiable hazards:

Risk Code

Hazard Advice / Action Required

0 No Apparent Hazards

• Should only be used as per manufacturers specifications

1 Manuals & Service History

• There are no manuals or instructions available

• There is no service history or maintenance records

2 Electrical Items

• Requires testing prior to use

• All leads and adaptors should be tested by an accredited tester or electrician for faults and tagged in accordance with AS/NZS 3760 and AS/NZS 3000

• Power must be isolated during cleaning or servicing

• Must only be used with an earth leakage circuit breaker

3 Safety Apparel

• Ear protection must be worn during operation; and/or

• Face protection must be worn during operation; and/or

• Eye protection must be worn during operation; and/or

• Hand protection must be worn during operation; and/or

• Foot protection must be worn during operation; and/or

4 Clothing

• Appropriate clothing must be worn by the operator

• Loose fitting clothing must not be worn

5 Safety Guards

• Safety guards are fitted which must not be removed as detailed in

AS 4024

9

Risk Code Hazard Advice / Action Required

6 Safety Guards

• Safety guards are missing

• Should not be operated until safety guards which meet with the manufacturers standards are fitted

7 Manual Handling

• Care must be taken when lifting heavy items

• Item containing glass or other fragile components must be carefully transported

• Be careful when removing items attached to walls in case they fall

• Secure all moving and removable parts prior to transporting items

8 Damaged Items

• Item is damaged as will be offered for sale as scrap only

9 Noise

• Must have the sound pressure level tested prior to commissioning and if over 85db(A) or if the impact noise is greater than 140db(A), then signage warning the users to wear hearing protection must be attached

10 Fire Fighting Equipment

• An accredited contractor must inspect and allocate a date tag in accordance with AS 1851-2005 Sect. 15 & 16 (6 monthly) and assess to AS 4655 (annually)

• Fire extinguishers - Clearly visible signs of both the fire extinguisher icon and fire extinguisher type must be installed above the fire extinguisher in accordance with AS 2444

• All fire extinguishers must be mounted not less than 100mm from the ground and not higher than 1200mm for the floor as detailed in AS 2444

• Once installed, all fire extinguishers should made easily accessible and cleared of any obstacles

• Staff must be trained to use fire protection equipment in accordance with AS3745 and OH & S Chapter 4

11 Paper Shredders

• The operator must not place hands close to shredding blades

10


12 First Aid and Safety Equipment

• All contents to first aid kits / boxes / cabinets must be carefully checked and any expired stock must be disposed

• Once installed, a clearly visible sign of the first aid icon (green cross) must be installed above the first aid station

• All safety apparatus should be tested for relevant compliance prior to use or installation.

13 Decommission & Removal

• Requires a licensed tradesman or technician for decommissioning

and re-installation

14 Calibrated Equipment

• Must be re-calibrated by a certified contractor prior to use

15 Contaminates

• Must be carefully checked and cleaned of contaminates from prior

use

16 Equipment Under Pressure

• Must be certified by an accredited contractor in accordance with

AS/NZS 3788 (bi-annually) and once relocated and installed, a certificate of currency must be displayed nearby

17 Forklifts & Attachments

• Where applicable, the operator must have a certificate of competency as per WorkCover regulations

• If ride-on, must be fitted with roll over protection

• If to be used on roads or public traffic areas, must be registered (NSW Conditional)

• Only attachments designed to be used with this model of forklift should be used

• The advised safe working load of all lifting attachments must not be exceeded

18 Pneumatic Tools

• Must be carefully inspected prior to deployment

11


19 Lifting Equipment

• Must be used only in line with manufacturers specifications

• The advised safe working loads must not be exceeded

20 Hydraulic Tools

• Must be carefully inspected prior to deployment

21 Gas Cylinders

• Must be adequately secured - by chain and/or with warning signage

• Must have a valid date stamp

• Must not be transported in an enclosed vehicle

22 Explosives

• Fastening charges must only be used as detailed in the Dangerous

Goods Act 1975

23 Equipment Used at Heights

• Must be only be used in accordance with the manufacturers

specifications

24 Dangerous Goods

• If classified as such under the NSW Dangerous Goods Act,

Australian Dangerous Goods Code must be stored in accordance with that Act and Code

25 Ventilation & Extraction

• Adequate equipment must be used with this item

• This item must only be used in an area with adequate ventilation

26 Registration

• All mobile plant if to be used on roads or public traffic areas, must be appropriately registered

• All mobile plant must be roadworthy in addition to the above i.e. all warning lights and signals must be working

12

Risk Code

Hazard Advice / Action Required

27 Professional Competency

• Must only be utilized by a skilled operator

28 Machinery Space

• Plant must have adequate work space surrounding it when

commissioned to allow for loading and unloading of work pieces and materials and the safe working space for operators

29 Conveyors

• Must comply with AS 1755 regarding design, construction,

installation and operations

30 Pipelines & Ducts

• Signs indicating the contents of pipelines must be installed in

accordance with AS 1345

31 Licensing

• Only appropriately licensed personnel must operate

LOT QTY DESCRIPTIONRISK

CODE

1 1 Table and Chairs - Round, Laminate, 900mm Diameter with 5 Brushed Aluminium Chairs 3, 4, 7

2 1 Desk - Laminate, 3 Drawers, 1800mm L x 600mm W x 700mm H 3, 4, 7

3 1 LCD Screen - HP Pro Display P231 - 23" 2, 3, 4, 7

4 1 NUC Desktop Computer - HP 2, 3, 4, 7

5 1 Multi Function Printer - Brother MFC-J6520DW 2, 3, 4, 7

6 1 LCD Screen - LG L19NB-7 - DOM: 2006, 15'', S/N: 603KGUH3B286 2, 3, 4, 7

7 1 LCD Screen - Chimei CMV938D - DOM: 2006, 15'', S/N: A190A2-H0 2, 3, 4, 7

8 1 LCD Screen - Hewlett Packard HSTND-3751-A - DOM: 2015, 22'', S/N: CNC5150CQM 2, 3, 4, 7

9 1 LCD Screen - Hewlett Packard HSTND-7041-L - DOM: 2016, 22'', S/N: 6CM6270DGF 2, 3, 4, 7

10 1 LCD Screen - Hewlett Packard HSTND-7041-L - DOM: 2016, 22'', S/N: 6CM6270DBT 2, 3, 4, 7

11 1 LCD Screen - Hewlett Packard HSTND-7041-L - DOM: 2016, 22'', S/N: 6CM6270DFL 2, 3, 4, 7

12 1 LCD Screen - Hewlett Packard HSTND-7041-L - DOM: 2016, 22'', S/N: 6CM6270DFQ 2, 3, 4, 7

13 1 LCD Screen - Acer G246HL - DOM: 2015, 22'', S/N: MMLWASA0025230AB9D8537 2, 3, 4, 7

14 1 Desktop Computer - Hewlett Packard - With Key Board And Mouse 2, 3, 4, 7

15 1 Desktop Computer - Hewlett Packard - With Key Board And Mouse 2, 3, 4, 7

15A 1 Desktop Computer - Hewlett Packard 2, 3, 4, 7

16 1 Printer - Brother MFC-J6520DW 2, 3, 4, 7

17 1 Printer - Brother HL-31C - S/N: E71876D5J711443 2, 3, 4, 7

18 1 Printer - Brother MFC-J6920DW 2, 3, 4, 7

19 0 VACANT LOT 0

20 1 Filing Cabinet - Namco - 4 Drawer 3, 4, 7

21 1 Filing Cabinet - 3 Drawer 3, 4, 7

22 1 Microwave Oven - Tiffany 2, 3, 4, 7

22A 1 Microwave Oven - Westinghouse 2, 7

22B 1 Microwave Oven - Mistral 2, 7

23 1 Kettle - Kambrook Aquarius Cord Free 2, 3, 4, 7

24 1 Refrigerator - Westinghouse Silhouette - 2 Door, 411L 2, 3, 4, 7

24B 1 Portable Air Conditioning Unit - Kogan 2, 7

Folio 2 of 11


CODE

24C 1

Mixed Lot Comprising Of:

1 x Sandwich Maker - Breville,

1 x Portable Fan - Mistral,

1 x Water Dispenser - Aqua To Go,

1 x White Table - Aluminium

2, 7, 13

25 5 Mop and Bucket - Oates 3, 4, 7

26 1 Two Level Work Bench - 4000mm W x 1000mm D x 1600mm H 3, 4, 7

27 1 Metal Bandsaw - Hafco BS7DS - DOM: 03/2016, 240V, S/N: 6700166 2, 3, 4, 7

28 1 Metal Rolling Table - 4100mm L x 48mm W x 8500mm H, Roller Width 700mm 3, 4, 7

29 1 Toolbox - Kincrome Blue Steel - 5 Drawer, Approx. 660mm W x 315mm D x 373mm H 3, 4, 7

30 1 Tap and Die Set - KC Tools PT52 - KC Tools PT52 Tap and Die Set 3, 4, 7

31 110 Drawer Toolbox, with Assorted Tools - Kincrome Blue Steel - Dimensions Approx. 660mm W x

435mm D x 480mm H3, 4, 7

32 1 Fabricated Metal Workbench, Including Dawn Vice - 2400mm W x 1800mm D x 8600mm H 3, 4, 7

33 1 Timber Workbench - 760mm H x 3000mm L x 1100mm W 3, 4, 7

34 1 Impact Drill - Hitachi DV13VSS - With Case, S/N: C650178 2, 3, 4, 7

35 1 Pneumatic Air Tool - Alliance 3, 4, 7, 18

36 1 Wood Sander - Milwaukee - S/N: ROS 125 E 2, 3, 4, 7

37 1 Laser Photo / Contact Tachometer - Lutron DT-1236L - With Case, S/N: I.1346194 3, 4, 7

38 1 Dremel - Robert Bosch 200 - 240V, S/N: F013020049 3, 4, 7, 18

39 1

Assorted Tools to Work Bench - 1x Handsaw

1x Stilsons

1x Vernier Callipers

1x Hammer

1x Homemade Shifting Spanner

1x Drill Bit Tightener

1x Hydraulic Bearing Puller Incomplete Set

3, 4, 7

40 1 First Aid Kit - CraftRight 3, 4, 7, 12

41 1 Spray Paint Gun 3, 4, 7, 18

42 1 Silicone Sealant - Mixed Quantity, 400g 3, 4, 7

43 9 Touch 'n Seal - Poly-Clean, 340g 3, 4, 7

44 1 Battery Charger - Arlec BC581 2, 3, 4, 7

45 1 Infrared Thermometer - Digitech QM7226 - 50 To 1000 Degrees with Case, S/N: 150727999 3, 4, 7

46 3 Compound Gauges - With Gauge Parts 3, 4, 7

47 1 Metal Roller - Steel, Twin Roller Stand 3, 4, 7

48 1 Parts Washer - Renegade Industrial RIPW20G-R - Mobile, 90L Capacity 3, 4, 7

49 1 Pallet Jack - JBS JBS-PT-AC25 - 2.5 Tonne Capacity, S/N: 00982965 3, 4, 7

Folio 3 of 11


CODE

50 10 Pallet of Mixed Fire Extinguishers - Chubb/ Flame Stop - Carbon Dioxide Type, Various Sizes 3, 4, 7, 10

50A 1 Step Ladder - Gorilla, Max Load 120kg 7

50B 1 Refrigerator - Fisher & Paykel, 200L 2, 7

50C 1 Plastic Table, Stainless Steel, 1500L x 1200 W x 600m H 3, 4, 7

51 1 Two Door Storage Cabinet - Namco - Four Shelves, Contents Included 3, 4, 7

52 4 Metal Frame Stands - 750 L x 500 W x 1600 H 3, 4, 7

53 1 Drill Press - Foreigntrade FTD 16 - DOM:1976, Capacity: 5/8, 240V, S/N: 760531 2, 3, 4, 7

54 1 Manual Metal Press - 1570mm H, Includes Manual Jack 3, 4, 7

55 1 Hopper Feed Auger - 3 Phase, 800 W x 1000 L x 900 H 3, 4, 7

56 4 Refrigeration and Water Chillers - 3 Phase, Stainless Steel Housing, On Casters 2, 3, 4, 7

57 1 Metal Tool Chest with Parts - 39 Drawers, 1200mm L x 50mm W x 1300mm H 3, 4, 7

58 1Mig Welder with Helmet - BOC Smooth Arc Advance MIG 350R - 3 Phase, Wire Feeder, S/N: EN60974-

12, 3, 4, 7

59 2 Welding Screens - Arc Safe - 1800mm H x 2000mm W and 3800mm W x 1800mm H 3, 4, 7

60 1 Metal Trolley - On Casters, Contents Included 3, 4, 7

61 1 Ventilation Fan - Aero AVDN-500-100-75 - 3 Phase, 160mm Diameter, S/N: 3600 3, 4, 7

62 1 Pallet of Mixed Parts - Sprockets, Drive Shaft, Electric Motor, Other Miscellaneous Items 3, 4, 7

63 1

Drying Room System - Fabricated - Aluminium Clad Sandwich Panel, Fitted 8 Double Entry Doors to 4

Divided Chambers, Each Chamber Fitted with Heated Air Floor Mounted Platforms x 5, Each Chamber

with 30 Ceiling Mounted Extraction Ports and Temperature Probe Approx. 24, 000mm x 5500mm x 19,

500mm, Fitted 4 x Weishaupt Natural Gas Burners, Model WG10N/1-D ZM-LN 110kW Capacity,

Actuated Controls, 4 x Approx. 1000mm Diameter Blower Fans by Browns Fans, Fitted Approx. 10kW

Motor, Gas Burner, Control Panel, Installed 12/2016 (Compliance)

This Asset Requires a Licensed Electrician and Plumber for Disconnection at Buyers Expense.

2, 3, 4, 7,

13

64 1 Pallet Racking - Dexion BV - 6 Bays, 5000mm H 3, 4, 7

65 1Contents to Bay 1 Pallet Racking - Comprising: Pallet of Mixed Cable, Electric Blower and

Miscellaneous Items3, 4, 7

66 1Contents to Bay 2 Pallet Racking - Contents Include Pallet Of Metal Piping, Pallet Of Mortar Mixture,

Overhead Projector, Cartridge Filter and Miscellaneous Items 3, 4, 7

67 1Contents to Bay 3 Pallet Racking - Contents Include Electric Motor, Stillage Cage Contents, Roll of

Rubber and Miscellaneous items3, 4, 7

68 1Contents to Bay 4 Pallet Racking - Contents Include Metal Drive Shaft Complete With Bearings, Pallet

With Electric Fan Aero Tech 3 Phase Power, Pallet Of Mixed Conveyor Rollers 600mm x 1160mm3, 4, 7

69 1Contents to Bay 5 Pallet Racking - Contents Include 5 Pallets Of Mixed Parts, Hose, Cables And

Electrical Pump Fittings 3, 4, 7

70 1Contents to Bay 7 Pallet Racking - Contents Include 7 x Pallets of Mixed Electrical Air Vent Machines,

Mixed Parts and Air Receiving Tank and Includes Various Boxes of Fastening Screws3, 4, 7

Folio 4 of 11


CODE

71 1

Block Moulding System - Expansion Machine and Ancillary Machines - Sung Hoon Engineering SHB-

416VS - Bead Collection Hopper Over, 5600mm x 1400mm x 1000mm, Blower Fed Dispensing to

Bottom, Steam Product Heating to Moulding Chamber, Moulding Chamber Approx. 5000mm x 750mm,

Pneumatic Actuation and Hydraulic Clamping and Product Infeed, 3 x Small Conveyors Under for

Ejection, Twin Approx. 1000L Steam Accumulation Tanks, Pneumatic Actuation with 2 x Approx. 15kW

Motor, Approx. 500L Vacuum Air Receiving Tank, Approx. 10kW Motor, Hydraulic Power Pack Vacuum

System, Machine Control Panel, 415V; Approx. 4000mm Motorised Conveyor Outfeed Fitted Gas Model

KSC1313, 150kg Inline Load Cell, Fabricated Pneumatic Actuation Product Tilting to End, S/N: Not

Visible; Packaged Air Compressor, Elgi, EG30-10DV, YOM: 2016, 30kW, 4.84m3 Capacity, 9.5BAR,

Minimal Hours, S/N: 0PA5040009; Various Ancillary Items Comprising: Operators Work Benches, Parts

Stationery Cupboard, Safety Shower and Eyewash; Air Receiving Tank, AMF Pioneer, Model: Not

Visible, Approx. 5000L, YOM: 1974, Advised Machine Completely Refurbished 2016, with Storage Silos


2, 3, 4, 7,

13,

29

72 1

Pressurized Expanding Machine - Sung Hoon Engineering SHF-1800P - Comprising:

Hooper Feed System, Sung Hoon, Model: Not Visible, Blue Steel, Hopper Approx. 500kg Over,

Pneumatic Gate Valve Under, Vibratory Collector with Hydraulic Gate Valve Under, Stand Mounted,

Aluminium Access Ladder; Pressurised Expander Machine, Sung Hoon, SHF-1800P, Vacuum Hopper

Feed Cyclone Over, Approx. 10kW Motor Over, Vacuum Motor to Side, 7.5kW Capacity, Steam Heated

Expansion, Sung Hoon Control Panel, Expansion Chamber with Pneumatic Discharge Gate, Fluidised

Bed Product Drying Enclosure, 4000mm x 1640mm with Inspection Hatches Over, Air Drying, Pneumatic

Gate to End Feeding, Approx. 1600mm Diameter, Rotary Sieving Powered by Approx. 1.5kW Motor,

415V, 700mm Diameter Blower, 450mm Diameter Blower, Bead Collection System, Fabricated, Model:

Not Visible, Comprising: 14 x Fine Mesh Hanging Collection Bags, Mounted to Galvanised Steel Tube

Frame System, Fitted 500mm Blower, Fitted Twin Bag Dust Collector with 500mm Blower, Approx. 16,

000mm (L) x 1900mm/Side, All Necessary Galvanised Ducting to System, Manual Gate Valves


2, 3, 4, 7,

13

73 1

Air Compressor and Receiver Tank - ELGI - Packaged Air Compressor, Elgi, EG30-10DV, YOM: 2016,

30kW, 4.84m3 Capacity, 9.5BAR, S/N: 0PA5040009 Air Receiving Tank, AMF Pioneer, Approx. 5000L,

YOM: 1974

This Asset Requires a Licensed Electrician for Disconnection at Buyers Expense.

3, 4, 7

74 2 Wall Mounted Fans - Digilex - 750mm, 240V 3, 4, 7

75 1

Packaged Boiler System - TBS Tru-Steam Automatic - DOM: 25/04/2014, Natural Gas Fired, 1800KPA

Design Pressure, 1000kW Continuous Rating, 2800L Flooded Volume, 120m3/Hr Max Firing Rate,

4.3m3 Combustion Chamber Volume, Mounted with Operators Stair Set and Access Platform, Nu-Way

Model MGN1350 LN T3X225 Burner System, YOM: 2009, 225-1350kW Heat Output, Natural Gas Type;

Approx. 7m Exhaust Stack; Approx. 2000L Condensate Recovery Vessel; Water Pre Treatment System

by Pentair Water USA, Reverse Osmosis Type, Twin Filter, Twin Gel Tanks, Digital Touch Control,

Stand Mounted; Water Feed Storage Tank by TBS Tru Steam, Stainless steel, Approx. 1500L, Mounted

to Elevated Yellow Steel Operators Platform, 6000mm Aluminium Extension Ladder Access; LMI P166

Tannin Dosing Pump; Pump System Comprising: 2 x Grundfos Model CR5-22 A-FGJ-A-E-HQQE,

Vertical Centrifugal Pump, Fitted 4kW Motors; TBS Tru Steam Control System, YOM: 2013; Steam

Accumulator Pressure Vessel, Bullet Type, Approx. 10, 000L Capacity, Stand Mounted


2, 3, 4, 7,

13

76 1

Water Recycling System - Comprising: Approx. 500L Bullet, Water Storage Tank; Approx. 2000L Water

Receiving Tank, Bullet Type; 2 x Grundfos CH4-40, 1160W Water Pumps; All Stand Mounted; Feeding

to 2 x Blackmore and Singleton Water Chiller Units, Fitted Stainless Steel Approx.. 200L Water Holding

Tanks Over, Frascold Model Q7254 Chiller Under to Each; Grundfos Model PC 15 and CH4-40 Water

Pump, 1160W; Submersible Pump


2, 3, 4, 7,

13

77 1 Mixed Steel Beams - Various Lengths and Dimensions 3, 4, 7

78 1 Mixed Galvanised Steel Piping and Pallet Racking Beams - Various Lengths and Dimensions 3, 4, 7

79 4Pallets Mixed Galvanised Steel Piping and Steel Mesh Walkway - Piping: 6000mm L x 500mm W; Steel

Walkway: 6100mm L x 850mm W 3, 4, 7

80 1 Mixed Piping and Steel Beams - Various Lengths and Dimensions 3, 4, 7

81 2 Roller Table - 1500mm L x 750mm H x 820mm W 3, 4, 7

82 12 Sandwich Panels - 2100mm W x 1200mm W x 5500mm H 3, 4, 7

Folio 5 of 11


CODE

83 1 Mixed Piping And Steel Beams - 6500mm L x 5000mm W 3, 4, 7

84 1 Steel Roller Framer - Fabricated Steel Frame, 600mm L x 3700mm W x 2200mm H 3, 4, 7

85 1 Table and Three Chairs - Laminated Timber, Colour: Black, Approx. 1500mm L x 1200mm W 3, 4, 7

86 1 Credenza - 1600mm L x 600mm W 3, 4, 7

87 1Contents to Office 1 - Comprising: 1 x Curved Laminate Work Desk, Credenza 1600 L, 600mm Wide,

Office Chair3, 4, 7

88 1 Contents to Office 2 - Comprising: 1 x L Shaped Laminate Work Desk; Credenza 1600 L, x 600mm Wide 3, 4, 7

89 1 Filing Cabinet - 4 Drawer 3, 4, 7

90 1 Coffee Table - 800mm L x 300mm W x 400mm H 3, 4, 7

91 1 Desk - Brown Laminate, Approx. 1500mm L x 900mm W x 1000mm H 3, 4, 7

92 1 Desk - Grey Laminate, Approx. 1500mm L x 1200mm W x 700mm H 3, 4, 7

93 1 Lounge - Leather, Two Seat 3, 4, 7

94 2 Platform Trolleys - On Casters 3, 4, 7

95 1 Pallet Racking - Space Rack - 2 x Bays, 4200mm H 3, 4, 7

96 12 Polystyrene Tiles - 1200mm x 600mm x 50mm 3, 4, 7

97 17 Polystyrene Tiles - Various Lengths and Dimensions 3, 4, 7

98 9 Allowance for Polystyrene Scrap - Various Lengths and Dimensions 3, 4, 7

99 1 Allowance for Polystyrene Scrap - Various Lengths and Dimensions 3, 4, 7

100 1Air Compressor with Upright Receiving Tank - Royce RC66 - 10HP, 3 Phase Power, Twin Cylinder on

Horizontal Air Receiving Tank 2, 3, 4, 7

101 1Extrusion Machine - Sung Hoon Engineering SHR-35E - DOM: Approx. 2005, 25mm Diameter, Twin

415V Heaters, Twin Screws, Blower2, 3, 4, 7

102 1

Materials Grinder - Moldex Wieser VBM630 - YOM: 1997, Single Shaft, 600mm, Fitted Infeed Hopper

Over, Approx. 10kW Motor, Twin Shaft Pre Breaker 600mm, Machine Control Panel, 415V, S/N: MOLD

9605/16

2, 3, 4, 7

103 1 Homemade Trolley - Mobile, 2000mm H x 600mm W x 800mm L 3, 4, 7

104 1 Assorted Timber and Cardboard - Various Lengths and Dimensions 3, 4, 7

105 2 Pallet of Assorted Parts - Includes Rollers And Chain Drives 3, 4, 7

106 2 Polystyrene Sheets - Various Lengths and Dimensions 3, 4, 7

107 2 Pallets - Includes Piping, Clamps, And Brackets 3, 4, 7

108 2 Yellow Polystyrene - 2400mm L x 1200mm W 3, 4, 7

109 4 Pallets of Polystyrene - Various Lengths and Dimensions 3, 4, 7

110 22 Steel Mesh Gates - 2600 L x 1500 W, Colour: Yellow 3, 4, 7

111 6 Pallets Of Polystyrene Sheets and Cubes - Various Lengths and Dimensions 3, 4, 7

Folio 6 of 11


CODE

112 4 Mixed Polystyrene Sheets and Cut-offs - Various Lengths and Dimensions 3, 4, 7

113 1 Polystyrene Scrap Bagged - Offcuts 3, 4, 7

114 1 Pallet Racking - Dexion - Various Lengths and Dimensions 3, 4, 7

115 1

Combination Recycling Machine - VARAG

EPS Recycling Machine SH-200BCS - DOM: 1995

3 Phase

Includes 4 Cubic Metre Hopper and Conveyor

3900 L, Belt Width: 200mm, S/N: 951 S5SD1AU160401

2, 3, 4, 7,

13,

29

116 1 Polystyrene Scrap and Cubes - Various Lengths and Dimensions 3, 4, 7

117 0 VACANT LOT 0

118 1

Contour Cutter - Wintech CS275040 - 415V, 67Amps, 50Hz, Blue, Conveyor: 6000mm x 2700mm, Hot

Wire, Comes with Computer Controller, Screen Make: Advantech, DOM: Approx. 2010, S/N: 442


2, 4, 3, 7,

13

119 4 Green Steel Frame With Scrap Metal To Bench - Various Lengths and Dimensions 3, 4, 7

120 1

Air Compressor - Renegade - Trade Tools Direct HD1000 - Cast Iron, 3 Cylinder, 3 Phase on Horizontal

Air Receiving Tank, S/N: CAI277917


2, 3, 4, 7

121 1 Outdoor Furniture Set - 8 x Chairs, 1 x Glass Top Table 3, 4, 7

122 1 BBQ - Jumbuck - 1 x 2 Burner 3, 4, 7

123 1 Outdoor Glass Top Table With 7 Chairs - 1500mm L x 980mm W x 720mm H 3, 4, 7

124 1 Timber Book Case - Three Shelves, 750mm W x 1100mm H x 220mm D 3, 4, 7

125 1 White Board - Visucom - 900mm x 900mm 3, 4, 7

126 1 Wall Mounted Clock - Eastar 3, 4, 7

127 1 Time Clock - Seiko Precision TP-5 3, 4, 7

128 1 Instant Boiling Water Unit - ZIP 3, 4, 7

129 1 Overhead Bench Rack - Stainless Steel, 1200mm L x 250mm W 3, 4, 7

130 1 Wall Mounted First Aid Kit - Trafalgar 3, 4, 7

131 1 2 Door Locker - Brownbuilt - 1800mm H x 80mm W x 450mm D 3, 4, 7

132 1 Black Timber Table - Patio - 1500mm L x 900mm W x 750mm H 3, 4, 7

133 1 Mixed Chairs - 6 x Steel Chairs, 3 x Office chairs, Contents Included 3, 4, 7

134 1 Wood Working Bandsaw - JET JWBS-14CSW - S/N: 41212164 2, 3, 4, 7

135 1 Black Steel Timber Workbench with Steel Frame - 2400mm L x 1400mm W 3, 4, 7

136 5

Assorted Tools, Comprising:

1 x Glue Gun

1 x Square

1 x Ruler

2 x Measuring Tapes

3, 4, 7

137 1 Leaf Blower - Bosch ALS 25 - 240V, S/N: 207601267 2, 3, 4, 7

Folio 7 of 11


CODE

138 1 Manual Brake Press - Hafco PB-24 - DOM: 2015, Approx. 700 L x 200 W x 300 H, S/N: A15111834 3, 4, 7

139 1 Ramset Gun - Ramset Insulfast GT3 - With Case 3, 4, 7

140 1 Ramset Gun - Ramset Insulfast GT3 - With Case 3, 4, 7

141 1 Wet and Dry Vacuum Cleaner - Ryobi - 240v, On Casters 2, 3, 4, 7

142 1 Timber Paint Cupboard - Contents Included, Approx. 700mm L x 700mm W x 1000mm H 3, 4, 7

143 1 Trolley - On Casters, 10 Tray Capacity, Approx. 1800mm H x 600mm W x 700mm L 3, 4, 7

144 1 Galvanised Shelving Unit - 5 Shelves, Approx. 1500mm L x 600mm W x 2000mm H 3, 4, 7

145 1 Circular Saw - Makita M4501KG 2, 3, 4, 7

146 1 Battery Charger - SCA 2, 3, 4, 7

147 1 Angle Grinder - Ryobi CG10 2, 3, 4, 7

148 1 Power Drill - Hitachi 2, 3, 4, 7

149 1 Cordless Drill - Powermaster - 12V 2, 3, 4, 7

150 1 Blue Tool Box - Mitsana - Mixed Tools, Various Spanners, Sockets, Ratchets, Screw Driver 3, 4, 7

151 1Table with Contents - Approx. 2000mm H x 600mm W x 1500mm L, with Various Paints, Turpentine,

Miscellaneous Items 3, 4, 7

152 1 Pedestal Fan - Trade Tools Direct - 750mm Diameter 2, 3, 4, 7

153 2 Wall Mounted Fans - 750mm Diameter 3, 4, 7

154 1 250mm Table Saw - Ozito TSF-1211 - DOM: 2015, 240V, S/N: 2FWZQQP 2, 3, 4, 7

155 1 250mm Table Saw - Ozito TSF-1212 - DOM: 2016, 240V, S/N: 2H2JXXC 2, 3, 4, 7

156 1

Circular Panel Saw - Comprising: 1 x Chain Driven Circular Saw, with Cutting Capacity of 1670mm,

Powered by 3 Phase Power, Includes: Control Station, Dust Extraction System Using Aero Tech Fans to

2 Free Standing Vertical Bags in a Metal Fabricated Stand, Includes: 1 x 6000mm Manual Infeed Rollers

and 1 x 3900mm Outfeed Rollers, Approx. 500mm Diameter Blade, Safety Fence, S/N: Not Visible


3, 4, 7, 13

157 9 Mixed Polystyrene Panels 3, 4, 7

158 1 Storage Cabinet - OFS Equipment - 1900mm H x 900mm L x 500mm W, Contents Included 3, 4, 7

159 1

Pallet Wrapper - Siat WST212-1 - YOM: 2003, 415V, 3 Phase, Includes Graphical Interface Panel, S/N:

14793


2, 3, 4, 7

160 1

Hot Wire Cutting Machine - Treffner/EPS, DOM: 08/2006, Comprising:

1 x Floor Mounted Metal Fabricated Bed, Designed for 5000mm EPS Blocks, 1 x Control Station; 1 x

Vertical to Horizontal 6 String Cutting Device, Capacity to Change Cutting Widths, 730mm (L) x 1360mm

(W), 3 Phase Power, Includes 6 Cutting Wires and 1 Vertical Cutting Hot Wire Guillotine to End, Overall

Dimensions: 8600mm (L) x 2040mm (W) x 2640mm (H), Manual Machine Control Panel


2, 3, 4, 7,

27

161 1 Work Trolley - Stainless Steel, Contents Included, Approx. 1000mm L x 300mm W x 1200mm H 3, 4, 7

161A 1 Stereo System - Sony, 240v 2,7

Folio 8 of 11


CODE

162 1

Foil Laminating Line - Comprising:

1 x Infeed Conveyor System with 4 Gear Driven Motors to 4 Separate Lots of Conveyor Rollers, with 2 x

Vertical Chain Driven Level Bars, 5700 x 3000mm, Feeding into a Level Platform Complete with 1

Overhead Roller, 1 x Continuous Roller System Leading into the Laminator; 1 x Laminator, The Union

Tool Corporation, Comprising: 2 x Inbound Rollers, and 2 x Outbound Rollers, Manual Adjustment

Wheels to Adjust Roller Gaps, Complete with 7 Day Timer, 415V, 1320mm Working Width, 3 Phase

Powered Chain Driven Motors; 1 x Hot Glue System, Valco Melton, Part No: KAP1348, Model 590,

400V, 60 AMPS, 3 Phase, S/N: 0811020, KAP1348


2, 3, 4, 7,

13, 29

163 1 Double Sided Step Ladder - Gorilla SM006-C - Maximum Load: 120KG, Size: 1800mm 3, 4, 7

164 1 Foil Roll Holding Frame with Foil - Homemade 3, 4, 7

165 1 Pallet Racking - Dexion BV - 2 Bays, 6000mm H, Contents Included 3, 4, 7

166 10 Pallets Polystyrene Sheeting 3, 4, 7

167 1 Extraction Bag Stand Steel Frame 3, 4, 7

168 1 Band Saw - Leten LCM 300A - 240V, S/N: 300809 2, 3, 4, 7

169 1 Power Saw - DeWalt - 230mm 2, 3, 4, 7

170 1 Pallet Racking - Spacerack - 3 Bays, 6000mm H 3, 4, 7

171 1 Pallet Racking - Spacerack - 3 Bays, 6000mm H 3, 4, 7

172 10Pallet Racking Contents - Includes Ramset Insulation Fastener, Ceilite Poly Clips, Denva Sticky Tape,

Polystyrene Tiles3, 4, 7

173 1 Pallet Racking - Dexion - 3 Bays, 5000mm H 3, 4, 7



176 3 Roll Visy Paper - Width 1230mm, Weight: 882Kg, Length Unrolled: 4192m 3, 4, 7

177 6 White Printed Paper/Foil Laminate, Includes Foil Wrapping - 1220mm 3, 4, 7

178 1 Recycled Polystyrene 3, 4, 7

179 3 Pallets Brown Paper Wrapping - Various Lengths and Dimensions 3, 4, 7

180 1 Cool Air Refrigeration Air Compressor - Pilot TM 30 - And Spare Parts, S/N: 99FE3406 3, 4, 7

181 0 VACANT LOT 0

182 1 Roller Parts 3, 4, 7

183 1 Brown Wrapping Paper - 640mm W x 1220mm L 3, 4, 7



186 1 Pallet Racking - Dexion - 2 Bays 5000mm H 3, 4, 7


Folio 9 of 11


CODE

188 5 Pallets Including Plastic Wrap and Silver Tape 3, 4, 7

189 3 Glass Top Table With Pallets Of Polystyrene Offcuts - 1700 L x 1200 W x 1000 H 3, 4, 7

190 1 Spill Kit - 3M - Colour: Yellow 3, 4, 7

191 1 Spill Kit - Pro Safe - Colour: Blue 3, 4, 7

192 1 Flammable Storage Cage - 1060mm W x 1350mm L 3, 4, 7

193 1

Utility Vehicle - Isuzu D-Max SX - DOM: 05/2011

Body Type: Single Cab Chassis, Tray back

Colour: White, Sign Written

4 Cylinder Engine

Diesel

2WD

5 Speed Manual Transmission

Reg. No: BZB71B

Odometer: 179, 529Km

Front Tyre Size: 215/65R165

Front Tyre Wear Remaining: 70%

Rear Tyre Size: 215/65R165

Rear Tyre Wear Remaining: 70%

Nil Rust

Extras: Air Conditioning, Power Steering, ABS, Cruise Control, Tow Bar, Power Windows, Power

Mirrors, CD Player

Notes: Rear Aluminium Tray

VIN: MPATFR85JBT100086

1, 2, 3, 4,

5, 79, 17,

19, 20,

26, 27,

28, 31

194 1

Truck - Mitsubishi Canter C500/600 - DOM: 11/1998

Configuration and Body: 4 x 2, Flat Bed

Colour: White, Sign Written

Engine Make: Mitsubishi

Gearbox Make: Mitsubishi

5 Speed

Reg. No: 121HZI

Odometer:437, 890Km

Spring Suspension

Disc Steel Rims

Tyre Size: 205/85R16

Tyre Wear Remaining: 60%

GCM: 6500kg

Nil Rust

Notes: Tray Dimensions: 4500mm (L) x 2460mm (W)

VIN: JMFFE637C0KJ00175

1, 2, 3, 4,

5, 79, 17,

19, 20,

26, 27,

28, 31

195 1

Forklift - Toyota 32-8FG25 - YOM: 2011

Ride-On

Manual Controls

Dual-Fuel

Colour: Grey and Orange

Hours: 882

3 Stage Clearview Container Mast

Max. Lift Weight: 1820kg

Max. Lift Height: 4700mm

Side Shift

Forward Tilt: 6 Degrees

Back Tilt: 6 Degrees

Pneumatic Tyres

Tyre Condition: Good

Attachments: Light Pack, S/N: 36174

This Asset Cannot be Removed From Site Until 4:00pm AEST Friday 23rd March 2018

1, 2, 4, 5,

7,

17, 19,

20,

21, 23,

25,

26, 27, 28

30

Folio 10 of 11


CODE

196 1

Forklift - Toyota 42/7FGK25 - YOM: Assumed late 1990's

Pedestrian

Automatic Controls

Power Steering

Dual-Fuel

Colour: Blue

Hours: 9929

2 Stage Clearview Mast

Max. Lift Weight: 2250kg

Max. Lift Height: 4000mm

Forward Tilt: 12 Degrees

Back Tilt: 6 Degrees

Cushion Tyres

Tyre Condition: Poor

Single Axle Wheels, S/N: 7FGK30/10901

1, 2, 4, 5,

7,

17, 19,

20,

21, 23,

25,

26, 27, 28

31

197 1Forklift Jib - East West Engineering FJL25 - Safe Work Load 2500Kg, S/N: 34599A


3, 4, 7,

17, 19

198 1 Forklift Jib - Bremco BMP016 - DOM: 03/2007, Safe Work Load: 1000kg, S/N: 07343, 4, 7,

17, 19

199 1Forklift Extension Tines - Length: 1600mm, Width: 150mm


3, 4, 7,

17, 19

200 1

Box Trailer - Brisbane A1

Trailers - Single Axle

Colour: Black

Dom: 2016

Tyre Size: 215/6051R16

Tyre Wear Remaining: 70%

Reg. No: EF0450

Reg. Exp: 06/05/2018

Dim: 8x5

Checker plate Floor

ATM: 1.02 Tonne

VIN: 6LTB0XTRLGR000464

3, 4, 7,

26, 28

Folio 11 of 11

To: Hymans Valuers & Auctioneers

Attention: James Rouse

Facsimile: 02 8270 4488

●

●

●

●

●

●

●

●

Cash Bank Cheque EFTPOS MasterCard Visa

Total Amount:

CREDIT CARD DETAILS

$

Card Expiry Date:

Signature to Authorise Credit Card Debit:

Card Number:

Name on Card:

EACHONLY

PAYMENT OPTIONS (Please Tick)

Direct Transfer:

ONLY

100 1 Example: Clerk Desk - Grey Laminate, 1800mm x 900mm

ABSENTEE BIDDING FORM

State:

Email: Mobile:

Date:

ONLY

EACH

BP

Name:

Suburb:

Phone:

GST

Please bid on my behalf for the below listed equipment. I acknowledge the following:

Lodgement of this form serves as a contract of sale and I will undertake to effect payment within 24 hours by thepayment option selected below.

I agree to the terms and conditions of the auction and buyer's notes as outlined in the auction sale catalogue.

Lot Qty Cross Bid Price

Bank:

ONLY

Notes:

EACH

EACH

Bidder's Number:

If I do not pay by 4pm of the day following the sale, a storage fee of $10.00 plus GST per lot, per day, will be incurred.

Buyer's Premium and GST are calculated as per the above example.

Address:

Business:

A deposit of $100.00 will be charged to my credit card, as a holding deposit, prior to sale and will be refunded if no lotsare purchased.

The title to this equipment does not transfer until such time as payment has been received and receipts issued.

$100.00ONLYEACH

836 542 918

Account Name:

ANZ

Auction Number:

Auction Name:

All equipment is purchased on an "as is - where is" basis and as such the vendor (or its agent) have no warrantyobligations unless alternative directives have been supplied to the buyer.

Signature:

Lot Description Total

BSB: 014-002 Account Number:

Hymans Asset Management QLD Trust Account

$13.50 $11.35 $124.85

My bid price will have a buyer's premium (BP) of 13.5% plus GST and 10% GST (total of 24.85%) added to it at thetimeof invoicing.

Date post:	07-Jun-2020
Category:	Documents
Upload:	others
View:	3 times
Download:	0 times

AUCTION SALE TO BE HELD ONSITE & ONLINE...2018/03/13 · 2 j) to appropriate any moneys received...

Documents