Rotary Switches 80www.elma.com
24 positions high grade switches
Up to 12 channels
Smooth and low noise transition
Gold plated contacts: 3 micron
Low switching torque
Series or ladder attenuator
For THT or SMT resistors
Type Comparison
Features / Switch Type Series A Series N Series R
Attenuator Type Series Series Step
Standard switching torque 4.0 Ncm 1.5 Ncm 8.0 Ncm
Resistor style THT SMT (mounted) THT
Standard product variety Number of channels (wafers)
IP60 or IP68
Config. end stops
Shaft diameter;6 mm or ¼"
Number of channels (wafers)
Resistor value: 10k, 50k, 100k
IP60 or IP68
Config. end stops
Shaft diameter;6 mm or ¼"
Number of channels (wafers)
IP60 or IP68
Config. end stops
Shaft diameter;6 mm or ¼"
See page 81, 84/85 82, 84/85 83-85
Attenuator box High end FET amplifier Audiophile tube amplifier
Audio Switches Overview
Series A
Series R
Series N
Application Examples
Example of Customer Modified Switch
We also sell standard and customized switch components enabling the customers to create their very unique and specific switching functions thanks to the modular switch concept.
Attenuator box by GoldpointTM
Rotary Switches81 www.elma.com
24 positions high grade switch
Up to 12 channels
Smooth and low noise transition
Gold plated contacts: 3 micron
Low switching torque
Series attenuator
For THT resistors
Standard Product Variety
Number of channels (wafers)IP60 or IP68Configurable end stopsShaft diameter; 6 mm or ¼"
Possible Customization
Shaft dimensions and shapeBushing dimensionsSwitching torqueWafer spacer dimensionsOthers
Audio Switch Series A
Resistors are not included
Preference Types Selection Chart1
Switching Mode Resistor Value 1-Channel Version 2-Channel Version
Shorting Any 04A1A00 04A2A00
Typical Applications
High end volume control
2-Channel Version (2 Wafers)
Drawings
6
1
9,5
43
1,6
1720
25
ø6
26
B A1 C
ø40
ø1,6
M10
x 0
,75
1,5
2,5
ø10
,2
7,5
2,7
ø10
,2
R1 R2 R24AC
B
Circuit diagramFront panel cut out Circuit diagram
1 For other types/options, see type key.
Rotary Switches 82www.elma.com
R1 R2 R23 13
2
Circuit diagram
1
9,5
46
10
2,54 2,540,64
17,518,5
25
26
20
4
ø32
ø1,6
1 2 3
ø6
M10
x 0
,75
1,5
2,5
24 positions high grade switch
Up to 12 channels
Smooth and low noise transition
Gold plated contacts: 3 micron
Low switching torque
Series attenuator
SMT resistors (mounted)
Standard Product Variety
Number of channels (wafers)Resistor value: 10k, 50k, 100kIP60 or IP68Configurable end stopsShaft diameter; 6 mm or ¼"
Possible Customization
Shaft dimensions and shapeBushing dimensionsSwitching torqueWafer spacer dimensionsOthers
Audio Switch Series N
Preference Types Selection Chart1
Switching Mode Resistor Value 1-Channel Version 2-Channel Version
Shorting
10 kOhms 04A1N01 04A2N01
50 kOhms 04A1N05 04A2N05
100 kOhms 04A1N10 04A2N10
Typical Applications
High end volume control
2-Channel Version (2 Wafers)
Drawings
Front panel cut out Circuit diagram
1 For other types/options, see type key.
7,5
2,7
ø10
,2
Front panel cut out
Rotary Switches83 www.elma.com
6
1
9,5
78
217,3 17 ,3 17,320
25
26
IN/OUT1
G
ø1,6
ø6
M10
x 0
,75
ø43
1,5
2,5
7,5
2,7
ø10
,2
IN
G
OUT
R1
a
R2
a
R2
4a
R1
b
R2
b
R2
4b
Circuit diagram
24 positions high grade switch
Up to 6 channels
Smooth and low noise transition
Gold plated contacts: 3 micron
Low switching torque
Ladder attenuator
For THT resistors
Standard Product Variety
Number of channels (wafers)IP60 or IP68Configurable end stopsShaft diameter; 6 mm or ¼"
Possible Customization
Shaft dimensions and shapeBushing dimensionsSwitching torqueWafer spacer dimensionsOthers
Audio Switch Series R
Resistors are not included
Preference Types Selection Chart1
Switching Mode Resistor Value 1-Channel Version 2-Channel Version
Shorting Any 04A1R00 04A2R00
Typical Applications
High end volume control
2-Channel Version (4 Wafers)
Drawings
Front panel cut out Circuit diagram
1 For other types/options, see type key.
Rotary Switches 84www.elma.com
Audio Switches General
Specifications
Mechanical DataResolution: ........................................................................24 positions max. (15° indexing)Switching torque (new condition):........................................Series A: 4.0 Ncm, series N: 1.5 Ncm, series R: 8.0 Ncm (+/- 25%)Rotational life: ...................................................................25,000 switching cycles min.Fastening torque of nut: .....................................................300 Ncm max.
Electrical DataFunction: ...........................................................................1 x 24 poles/positions per wafer
(max. 12 wafers; series A/N: 12 channels, series R: 6 channels)Switching mode: ................................................................ShortingLoad current: .....................................................................2 A max. (resistive load)Switching voltage:..............................................................42 VDC max.Contact resistance (new condition): .....................................100 mOhms max.Insulation resistance:..........................................................1012 Ohms min. (contact to contact/housing)Switching capacitance: .......................................................1 pF max. (contact to contact)Dielectric withstanding voltage:...........................................500 VDC during 60 seconds
Material DataShaft: ................................................................................Stainless steelBushing/housing:...............................................................Zinc diecast, zinc plated and passivatedNut: ..................................................................................Brass, zinc plated and passivatedContact plating:.................................................................AuCo (hard gold); 3 µmInsulation material: ............................................................PCB: FR4 (glass fiber epoxy), rotor: Polybutylene (PBTB)Soldering leads:.................................................................Alloy copper, AuCo plated (hard gold)
Environmental DataOperating temperature range:............................................-40 to +85°CIP sealing: .........................................................................IP60, optional IP68 (2 bar, 1 hour) shaft/front panel sealingVibration: ..........................................................................10 Grms max. @ 10 to 2000 HzFlammability:.....................................................................UL94-HB
Packaging SizesTray: .................................................................................10 pcs.
Soldering Conditions
Hand soldering:.................................................................300°C max. during 3 s max.Wave soldering:.................................................................280°C max. peak temperature during 5 s max.
Can be used in many cases in place of shortened bushes; made of glass-fibre
reinforced plastic to compensate the front panel thickness; available in two
standard lengths.
Length L Packaging Unit Order Number
3.5 mm 10 pcs. 4124-31
3.5 mm 100 pcs. 4124-30
5.5 mm 10 pcs. 4124-36
5.5 mm 100 pcs. 4124-35
Special Wafer Spacing
Our spacers allow the following wafer spacing:
L = 21.3 mm or 25.5 mm
Spacers
Rotary Switches85 www.elma.com
Audio Switches General
Type Key
0 4 A X X X X - X X X X X X X X
Number of Channels
Series
A - Series AN - Series NR - Series R
Resistor Value (N Series Only)
00 - Without resistors01 - 10 kOhms05 - 50 kOhms10 - 100 kOhms
IP Sealing
00 - IP6030 - IP68
Shaft Diameter
0 - 6 mmZ -¼"
Shaft Length (AL)
000 - 25 mmxxx - Custom1
(e.g. 18.5mm = 185)
1 Customized Shaft Length
Please state shaft length (AL) measured from mounting face
(max. AL = 50 mm).
Factory Set End Stop
00 - 24 pos.23 - 23 pos.22 - 22 pos.21 - 21 pos.20 - 20 pos.19 - 19 pos.18 - 18 pos.17 - 17 pos.16 - 16 pos.15 - 15 pos.14 - 14 pos.13 - 13 pos.12 - 12 pos.11 - 11 pos.10 - 10 pos.09 - 9 pos.08 - 8 pos.07 - 7 pos.06 - 6 pos.05 - 5 pos.04 - 4 pos.03 - 3 pos.02 - 2 pos.