Rockwell Automation Configured DrivesAustralia and New ZealandA unique network of AC drive solution providers

Configured Drives Centres

Rockwell Automation – a world leader in industrial automation – offers a refreshing approach to the supply and support of pre-engineered AC drives for motor control and protection.

Introducing the Rockwell Automation Configured Drives Centres, our distributor network that makes Rockwell Automation AC drive solution providers available to you.

Through its unique distributor network, Rockwell Automation provides these Configured Drives Centres that support world-class drive technology via local and personalised channels. These Centres are supported by the Rockwell Automation Drive Engineering facility, and offer full AC drives pre-sales support, ordering and specification, and after-sales technical support.

World-class AC drive solutions –

Cairns

Darwin

Gladstone

Brisbane

NewcastleSydney

Canberra

Melbourne

Hobart

Adelaide

Perth

Auckland

Christchurch

New ZealandTasmania

NHP

INACO

2

Rockwell Automation - more accessible than everTo contact your local authorised Rockwell Automaton distributor visit: www.rockwellautomation.com.au or www.rockwellautomation.co.nz

Australia & New ZealandFrom mixers in Mildura, to blowers in Bunbury, and wastewater pumps in Warabrook, AC motors provide the motive power for Australian & New Zealand industry.

Reliability you can trust - Rockwell Automation configured drives• Readytorun-guaranteed: Fully factory assembled IP54 enclosures that

are tested at the Rockwell Automation Drive Engineering facility, all drives are ‘ready to run’.

• Fastdelivery: Drives are delivered to site within just four to six weeks of order.

• Enhancedreliability: As Rockwell Automation represents the single point of responsibility for all technology, engineering design, assembly and after-sales support, the Configured Drives Centres offer a refreshing new standard of drive reliability.

• Safety-andstandards-compliant: All Rockwell Automation configured drives are designed, built and tested to comply with the relevant Australian Standards. These include machine Safety Categories 1 to 3 (according to Australian Standard AS4024), plus Australian Standards defining RFI, harmonic emissions and other electrical performance standards.

• Engineeringexcellence: With 40 years experience, Rockwell Automation in the South Pacific region offers impressive experience and know-how of drives solutions for industry. All design and assembly work is completed in-house at the Rockwell Automation AS/NZS 9001:2001 quality certified facility.

Choice –

3

TheconfigureddrivesoptionsRockwell Automation Configured Drives offer a vast array of options in their basic drives packages - a level of choice that guarantees the most accurate match with your needs:

• Power: Drives are available in power capacities spanning 0.75 to over 1MW. Power circuits can include bypass contactors for direct-on-line (DOL) operation, and line filters (where required).

• Control: Speed control can be via local or remote 4 to 20mA or 0 to 10V inputs. Run/stop indication and start/stop pushbutton control is also provided either local to the panel or remote.

• Networkconnectivity: Rockwell Automation configured drives offer connectivity to today’s most advanced industrial networks including EtherNet/IP, ControlNet, DeviceNet, Remote I/O and Data Highway Plus (DH+). Other networks are also supported, including ProfiBus, Interbus, RS485 DFI, RS485 HVAC and Lonworks.

• OperatorInterface: All drives come complete with the Allen-Bradley® PowerFlex® Human Interface Module (HIM) - a fully-featured LCD multi-line/multi-lingual display and configuration panel. The HIM provides all drive configuration and real-time drive operation data, and may be mounted either on the drive unit or the front of the drive enclosure.

• Motorprotectionandmonitoring: A wide range of motor protection and monitoring options are available including: cooling blowers, shaft encoders, thermistors and anti-condensation space heaters.

TheheartoftheMatter—Allen-BradleyPowerFlexAt the heart of all Rockwell Automation Configured Drives is the Allen-Bradley PowerFlex family of AC drives — the world’s leading AC drives technology. PowerFlex represents an optimal mix of advanced power electronics and superior microprocessor control, all in a flexible and compact package.

Features include:• Three control modes: Vector Control with Force Technology, Sensorless

Vector and Volts/Hertz control• Superior open- and closed-loop speed and torque control performance• Full Featured LCD Human Interface Module (HIM), with easy-to-use start-up

and tuning algorithms• Modular drive components for easy maintenance.

Beyond the basics –

Publication CONFIG-BR001B-EN-P – October 2013 Copyright ©2013 Rockwell Automation, Inc. All Rights Reserved. Supersedes Publication CONFIG-BR001A-EN-P – February 2010

Allen-Bradley and Listen.Think.Solve. are trademarks of Rockwell Automation, Inc.

www.rockwellautomation.com.au www.rockwellautomation.co.nz

Power, Control and Information Solutions HeadquartersAmericas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444Europe/Middle East/Africa: Rockwell Automation SA/NV, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640Asia Pacific: Rockwell Automation, 27/F Citicorp Centre, 18 Whitfield Road, Causeway Bay, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846

Rockwell Automation Australia Ltd Phone FaxMELBOURNE 841 Mountain Highway, Bayswater, VIC 3153 (03) 9757 1111 (03) 9729 1418SYDNEY 32 Sirius Road, Lane Cove, NSW 2066 (02) 9428 7222 (02) 9248 2100BRISBANE Unit 4, 8 Metroplex Avenue, Murarrie QLD 4172 (07) 3399 0100 (07) 3399 8082PERTH Unit 1, 47 McCoy Street, Myaree, WA 6154 (08) 9333 5800 (08) 9317 3409ADELAIDE Wellington Centre, 2 Portrush Road, Payneham, SA 5070 (08) 8165 4000 (08) 8365 0322

Rockwell Automation New Zealand Ltd Phone FaxAUCKLAND 2B Pacific Rise, Mt Wellington, Auckland (09) 276 3070 (09) 276 5406CHRISTCHURCH 480C Moorhouse Avenue, Christchurch (03) 379 1052 (03) 379 1379NEW PLYMOUTH 2 Dean Place, Egmont Road, New Plymouth (06) 759 9076 (06) 758 7938

For more complex applications, Rockwell Automation can also provide drive configurations customised to meet specific application requirements. Your Configured Drives centre can refer you to a Rockwell Automation drives system consultant to explore your particular requirements.

Custom-configureddrivepackagesThese packages include enhanced enclosure ratings to IP65, customised enclosure heights and customised labelling.

Semi-engineeredandengineereddrivesolutionsFully tailored to meet the most exacting requirements, these solutions include:• Multiple drives and motors• Load sharing applications• Drives for non-Australian voltages• Drives for hazardous (explosive atmosphere) applications and other environments• Low-harmonic solutions• SCADA and HMI solutions• Purpose-built variable speed AC motors

Localsupport,world-classengineering—Australia&NewZealandRockwell Automation Configured Drives Centres offer a unique balance of local service supported by world-class technology and engineering. For a refreshing approach to AC drives supply and support — wherever you need it and for whatever application — contact Rockwell Automation Drives Systems or your local authorised Rockwell Automation distributor.