TRT-1 ASSEMBLY AUTOMATION ® AUTOMATIC SCREWDRIVING SYSTEMS Torque Reaction Arm with Power Assist For Automatic Screw Driving 1 8 4 9 B u s i n e s s C e n t e r D r . D u a r t e , C A 9 1 0 1 0 626-303-2777 www.assemblyauto.com Ball bearing construction Optional 2-axis encoders Air cylinder / spring support Flexible cable / airline support Various arm lengths available DC or pneumatic tools Rework control Trigger Start Ergonomic swiveling handpiece Powered bit extension (optional magnetic or vacuum bits for special applications) eliminates operator fatigue provides effortless zero-G feel 6 lbs., wt. (2.7 kg) To be used with Assembly Automation’s Screw Feed units SA-1M, SA-1.5, & SA-2.5
Transcript
T R T - 1
ASSEMBLY AUTOMATION®A U T O M AT I C S C R E W D R I V I N G S Y S T E M S
Torque Reaction Arm with Power AssistFor Automatic Screw Driving
1 8 4 9 B u s i n e s s C e n t e r D r . D u a r t e , C A 9 1 0 1 06 2 6 - 3 0 3 - 2 7 7 7 w w w . a s s e m b l y a u t o . c o m
Ball bearing construction
Optional 2-axis encoders
Air cylinder / spring support
Flexible cable / airline support
Various arm lengths available
DC or pneumatic tools
Rework control
Trigger Start
Ergonomic swiveling handpiece
Powered bit extension(optional magnetic or vacuum bits for special applications)
eliminates operator fatigue
provides e�ortless zero-G feel
6 lbs., wt. (2.7 kg)
To be used with Assembly Automation’s Screw Feed units SA-1M, SA-1.5, & SA-2.5
Controlled screw thrust with positive screw extension.
The operator can position the fastener easily beforescrewdriving.
Controlled down assist feature requires nooperator down pressure
Keeps the bit engaged and reduces fatigue, especiallyon self tapping applications.
Optional encoders provide positional feedbackto ID specific fastener positions.
Encoders allow screwdriving sequence to be monitored.
Unique long narrow jaws allow access in areasnot possible with other hand pieces.
Improves visibility on ccrowded assemblies withrestricted access.
Conveniently positioned trigger on the handpiece provides remote start for air or DC tools.
Provides operator control with less than 8 oz. to activate trigger.
Rework control allows retorquing withoutscrew feeding
May be used to retorque by operating a switch mountedon the hand piece.
