Auto ID - Movetec · USB cable plugA-miniB 2 m: OP-51580 Control cable 2 m: OP-87224 5 m: OP-87225...

Auto IDGeneral Catalogue

BARCODE READERS

2D CODE READERS

AUTO ID DATA CONTROLLERS

2

SETTING A NEW STANDARDfor code reading combining performance and reliability

READ! VISUALISE!

Advanced decoding algorithms provide best-in-class reading capability.

View reading performance and ensure stable operation without a PC!

3

FIXED-TYPE READERS/CAMERA TYPE

6Autofocus

SR-1000 SeriesSetting the standard for code reading

12PoE

SR-750 SeriesStable reading for difficult-to-read 1D and 2D codes

13Ultra Compact

SR-700 SeriesHigh performance reading in a compact body

FIXED-TYPE READERS/LASER ∙ CCD TYPE

16Digital, Laser Type

BL-1300 SeriesHigh speed and high resolution 1D compact code reader

18Long-range, Laser Type

BL-700 SeriesUltra long range and outstanding angle capabilities

19Ultra Compact, CCD Type

BL-180 SeriesUltra-compact size, half the size of a business card

PERIPHERAL EQUIPMENT

20AutoID Data Controller

DV-90 SeriesVerifies, evaluates and converts data to I/O signals

21RS-485 Master Unit

N-410 SeriesSupports Multi-Drop and Multi-Head Mode

22Dedicated Power Supply/ Communication UnitsSelectable to match the specifications of the device

HANDHELD-TYPE READERS

24DPM Code Model

SR-G100Easy to read challenging codes

261D and 2D Code Model

HR-100 SeriesWide target area and high-speed response

27Barcode Model

BL-N70 SeriesVarious communication models are available to connect with different PC or PLC systems.

Auto IDEASY-TO-USE HIGH PERFORMANCE

CONNECT!

Communication with a variety of controllers, such as PLCs and laser markers, is possible! This makes it possible to construct systems that match their environments.

4

Selecting the correct parts for assembly

Identify which parts should be selected for assembly by reading a code containing the information.

Differentiating door part types

Prevent assembly error and manage production history for traceability.

Identify which engine type is present by reading a 2D code marked on the engine.

Reading the engines handled by Gantry loaders

Identifying crankshafts for traceability

Confirm which product is present regardless of code position with the code reader’s wide field of view.

Traceability at manual operation

Read codes stably on metallic and cylindrical surfaces. Stable reading reduces cycle time.

Identify which parts are rolling down a conveyor by reading 1D codes printed on the labels.

Reading metal billet IDs

Managing traceability for injectors

It can read quickly, reducing the glare on the black resin cylinders.

Traceability management for headlight

Read codes on label regardless of code position with the code reader’s wide field of view and far distance reading.

Read a code marked on the product to confirm the correct part is present before assembly.

Identifying correct product before assembling

APPLICATIONS

AUTOMOTIVE/CHASSIS ASSEMBLY

METALS/MACHINING

PLASTICS/MOULDING

Identification solutions for every industry and every application. KEYENCE is dedicated to providing solutions for product traceability and management. A full line of 1D and 2D code readers, along with dedicated control and communication devices, ensures complete and reliable solutions.

5

Label detection

Verify presence of a barcode when applying packaging labels, even at high speeds.

Correct product identification

Confirm the correct product is present by reading the barcode data on the packaging.

Confirm if the correct part is present at the correct time by reading the barcodes printed on the packaging.

Prevent incorrect mixing of products

Identify several IC parts at once

Read codes on several IC parts at once to confirm that all are present.

Identify codes marked on lead frame

Trace product history throughout the entire process by reading a 2D code marked on the copper lead frame.

Check that the correct PC board is present at the correct time by reading 2D codes marked on the boards.

Confirm PC board presence

Data verification

Inkjet printed codes on an uneven background (cardboard) can be read stably.

Wafer identification at FOUP station

Identify which wafer is present when loading and unloading by reading a 2D code marked on the wafer.

Ensure the correct carrier is present by reading a 1D or 2D code.

Carrier identification

FOOD/PHARMACEUTICALS

SEMICONDUCTORS/ICS

OTHERS

PRESS THE BUTTON

SET-UP COMPLETE

1

2

3

AUTOFOCUS

The reader can be mounted at any distance. (1000 mm max.)

AUTOMATIC TUNING

Determines optimum settings for exposure time, image processing filter, etc. [Approx. 750000 combinations]

AUTOMATIC POLARISATION

Glare can be eliminated. Reader angle adjustment or external lighting becomes unnecessary.

6

SR-1000 Series

Autofocus 1D and 2D Code Reader

0.063 mm

SMALLEVEN IF THE CODE IS

Distance: 110 mm

CHANGESEVEN IF THE POSITION

FAREVEN IF THE DISTANCE IS

Distance: 1000 mm

1.6× LONGERthan conventional models

Range: 290 mm × 220 mm

4× WIDERthan conventional models

7

BleedingNylon resinBlack resin Trapezoidal distortion

Brass Thick printing Tread barrel distortion

PCB Thin printing Parallel distortion

Ceramic

Example codes requiring brightness correction Example codes requiring filteringExample codes requiring threshold correction Example codes requiring geometric correction

Low contrast

Automatically configures various combinations of exposure time, dynamic range and gain in order to achieve the optimal brightness.

Automatically corrects black/white thresholds and optimises the contrast between code and background.

Automatically selects the best filter and filtering intensity to correct the captured image.

Corrects distorted codes, such as those on cylinders and other round surfaces or when the reader is mounted at an angle.

CAPTURE BRIGHTNESS CORRECTION

CONTRAST THRESHOLD CORRECTION

FILTER CORRECTION

GEOMETRIC CORRECTION

AUTOFOCUS

AUTOMATIC TUNING

Mounting is less restricted by the performance or

specifications of the code reader itself, thus improving

flexibility in machine designing for production lines

and jigs.

The code reader automatically optimises the exposure

time, image processing filter and other parameters

according to the target and mounting distance.

EASY SET-UP BY “JUST PRESSING THE BUTTON”1


8

Without polarisation filter With polarisation filter

Conventional model SR-1000

DPM ON CAST SURFACE

METAL

ERR

ERR

ERR

OK

OK

OK

Light is concentrated effectively within the field of view to provide high intensity illumination.

With polarisation filter (polarised light)

AUTOMATIC POLARISATION CONTROL

The code reader automatically removes glare and eliminates the need for

mounting angle adjustment or external lighting during installation. When

combined with the autofocus function, mounting becomes highly flexible.


Without polarisation filter (direct light)

HAIRLINE

METAL

CYLINDER

BLACK RESIN

NEW OPTICAL DESIGN FOR STABLE READING

CPC (COMPOUND PARABOLIC CONCENTRATOR) ILLUMINATIONA specially shaped reflector has been designed to create high efficiency

illumination by reducing loss in light intensity from the high intensity LEDs.

Gold plating maximises the reflectance to achieve brightness exceeding

conventional levels by 400%. This provides reading under bright, uniform

illumination even at long ranges.

F I RST- IN - I TS -C LASS , BU I LT- IN OLED D ISP LAY

VAR IOUS INTERFACE CAPAB I L I T I ES AND EXPANDED FUNCT IONAL I TY

9

OK/ERROR count display

Data communication condition display

Readout data display

I/O signal behaviour displayEthernet setting data

Live View

CHECK OPERATION ON-SITE WITHOUT A PC

There is no need for a personal computer or monitor in the facility. The code position adjustment and operating condition can be

checked simply with the intuitive built-in display.

PUSH!

EXTRACTING SPECIFIC DATA CONTROLLING OUTPUT SIGNALSINSERTING ADDITIONAL INFORMATION TO IMAGE FILE NAMES

Connection information for various PLC types can be found here: www.barcodereader.com

COMPATIBILITY WITH VARIOUS COMMUNICATION PROTOCOLSBuilt-in EtherNet/IPTM, PROFINET, and PLC link protocols make PLC connections

easier. In addition, general-purpose TCP/IP and FTP communications are also

supported. With FTP communication, transmission of not only images but also

text data is also possible.

CUSTOMISABLE OUTPUT FORMATS USING DATA EDIT FUNCTIONThanks to customisable output formats for the code reader, programming corrections on the host side (PC, PLC, etc.) are not

required, allowing for shorter data processing time.

EXAMPLES OF DATA EDIT FUNCTION IN USE

Read OK 01

Read OK 02

Read OK 01

Read NG 01

OK/NG output based on vertex coordinates of code

0 1 2 3 4 5 6 7 8 9 9 8

12578

NGOK

http://www.barcodereader.com/

OPT IONAL ACCESSORY L INEUP

10

0.025 mm

Bright field

Dark field

High resolution attachment SR-10AH

Improved reading of extremely small codes and codes printed on mirror finished surfaces.

8.0 mm

4.5times

3.5 mm

5.5 mm 11 mm

SR-D100HAConventional model

Increased by

20 mm

40 mm

to

Conventional model

SR-1000+

SR-10AH

DEAD SPACE

Mounting image

VARIABLE INSTALLATION DISTANCE FOR

EXTREMELY SMALL CODES

When KEYENCE’s test codes are usedCell size 0.040 mm

FIELD OF VIEW:

INCREASED BY

Comparison with conventional modelsMounting distance 40 mmWhen the image capturing range is 800 × 600 pixels

4.5 times

HIGHLY FLEXIBLE MOUNTINGComparison with conventional models

AUTOMATIC CONTROL OF OPTIMAL READING CONDITIONSWhen auto-tuning is enabled

IMPROVED READING OF EXTREMELY SMALL CODES

Micro-size sample (chip LED) Mirror finished surface (wafer) Metal (IC package)

3 mm

APPLICATION EXAMPLES

11

CONTROL CABLE

ETHERNET CABLE

USB CABLE

NFPA79 compliant control cable with D-sub 9-pin2 m: OP-875275 m: OP-87528

10 m: OP-87529

USB cable plugA-miniB2 m: OP-51580

Control cable2 m: OP-872245 m: OP-87225

10 m: OP-87226

NFPA79 compliant control cable

2 m: OP-873535 m: OP-87354

10 m: OP-87355

NFPA79 compliant Ethernet cable2 m: OP-872305 m: OP-87231

10 m: OP-87232

PC

For setup

Serial communication, PLC link

POWER SUPPLY

HOST

Cable

• AutoID Network Navigator• AutoID Keyboard Wedge• AutoID Terminal• MultiMonitor• FileView• Various driver files• EDS/GSDML files• Sample Windows programs

Mounting bracket OP-87866


* SR-1000 only

Adjustable bracket OP-88002

Reflector attachment SR-10AR

Standard type SR-1000

Wide-field type SR-1000W

PC for setup

Setup Software SR-H6W

PC/Panel PC/Board PC

PLC

HMI [Touch panel]

24 VDC power supply

TCP/IP, FTP, PLC link

SR-1000 Series

24 VDC

RS-232C

I/O terminal

Ethernet

USB

Ethernet

SYS TEM CONF IGURAT ION D IAGRAM

12

CABLES

CONFIGURATION SOFTWARE

High-resolution type

SR-750HAClose-range type

SR-750Middle-range type

SR-751Long-range type

SR-752Long-range type + lens

SR-752 + SR-75L4Long-range type + lens

SR-752 + SR-75L6

Minimum resolution 0.082 mm 0.127 mm 0.19 mm 0.19 mm 0.33 mm 0.5 mm

Focal distance 38 mm 60 mm 100 mm 250 mm 400 mm 600 mm

Reading distance(mm)

0

50

100

150

200

250

300

350

400

450

500

550

600

650

700

Lens attachment SR-75L4/75L6

The detection distance can be extended further by installing the attachment on the SR-752 long-range type.

The reading range above is a value measured with a KEYENCE test label. Max. 305 mm, 490 mm, and 690 mm are for DataMatrix (cell size 0.5 mm).

Max. 305 mm

Max. 490 mm

Max.690 mm

Minimum resolution

0.082 mm

LENS ATTACHMENT

400 mm lens: SR-75L4600 mm lens: SR-75L6

NFPA79 compliant Control cable w/connector

2 m: OP-875275 m: OP-8752810 m: OP-87529

Ethernet plug assembly

OP-87362

Control cable

2 m: OP-872245 m: OP-8722510 m: OP-87226

NFPA79 compliant Control cable

2 m: OP-873535 m: OP-8735410 m: OP-87355

Setup software SR-H6W

NFPA79 compliant Ethernet cable

2 m: OP-873595 m: OP-8736010 m: OP-87361

SR-750 Series

PoE & Compact 1D and 2D Code Reader

MODEL L INEUP

FOUR MODELS AND DEDICATED LENS ATTACHMENTS TO SUPPORT VARIOUS READING CONDITIONSThe four models of the SR-750 Series cover a wide range of applications from reading tiny codes printed on very small parts to reading codes from a long distance.

13

N-R4 RS-485 N-410K RS-232C

N-R2 N-R4

N-L20N-UB

RS-232C

USB

N-R2 RS-232C

N-R4 RS-422A

N-UB USB-COM

EthernetN-L20

PC

PLC

TCP/IP, FTP, PLC link

HOSTRS-422A/485

Ethernet

SR-700Series

SYSTEM CONFIGURATION DIAGRAM

NX-CO3R (3 m)NX-CO5R (5 m)

EXTENSION CABLESR-700HAHigh-Resolution

SR-700Close-Range

SR-710Middle-Range

Minimum resolution 0.082 mm 0.127 mm 0.19 mm

Focal distance 38 mm 60 mm 100 mm

Reading distance(mm)

0

50

100

150

200

Minimum resolution

0.082 mm

Setup software SR-H6W

CONFIGURATION SOFTWARE

MODEL L INEUP

SR-700 Series

Ultra Compact 1D and 2D Code Reader

SMALLEST IN ITS CLASS WITH OUTSTANDING EASE-OF-USEKEYENCE focused on functionality and ease-of-use, while designing the smallest 1D and 2D code reader in its class.

14

SETUP SOFTWARE SR-H6W

Monitor the field of view to adjust the position of the code.

The focus is adjusted automatically.

Automatically selects from about 750000 parameter combinations and whether or not to enable the polarisation filter.

TRIGGER SETTINGS (I/O input, command input)

STEP

1DESTINATION FOR READ DATA (Field network, PC)

STEP

2

COMMUNICATION PROTOCOL (EtherNet/IPTM, PROFINET, TCP, UDP, or PLC link)

STEP

3ADVANCED SETTINGS (Detailed setting for each protocol)

STEP

4

EASY-TO-USE HIGH PERFORMANCE

Anyone can easily configure advanced reading settings

and optimal communication settings. What’s more,

the improved measurement modes support accurate

and reliable operations.

EASY SETUP

Simple Tuning steps allow for quick configuration; automatically

configuring the SR Series with optimal reading conditions.

ETHERNET COMMUNICATION WIZARD

Setup can be completed in just four steps with a question-answer form including visual explanations. In previous versions, the user

needed to understand the settings available on the screen and determine which items required input.

The new version uses a setup wizard to eliminate the need of item extraction, reducing man-hours for communication setup.

15

SPECIFICATION AND INSTALLATION CHECK

OPERATIONAL TESTING AND MAINTENANCE

SIMPLE OPERATIONS

LIVE VIEW & READING TEST: Reduce manhours for setup by executing reading tests: check read rate, decode time, and determine which banks are best used for reading.

AUTO ID TERMINAL: Establishes direct communication with the code reader in order to isolate problems due to communication.

AutoID KEYBOARD WEDGE: Just like when a handheld reader is used, data can be output to a spreadsheet.

INSTALLATION GUIDE: Selecting the optimal reader model and a preview of the field of view can be done based on code size and working distance.

MULTI-MONITOR: See Live Images from up to 16 connected Readers at once to monitor operation.

A B C

1

2

3

4

1 2 3

16

BL-1300 Series

Ultra-Compact Digital Barcode Reader

NEW HIGH-SPEED MOTOR AND RECEIVER LENSBL-1300 Series models have a high-speed motor 2.6 times faster than previous models, enabling performance of 1300 scans and 1300 decodings per second. KEYENCE has also developed a new aspherical lens that has doubled the intensity of the received beam (the read source), reducing noise and increasing the effective label reading distance.

HIGH-SPEED PROCESSING CIRCUITThe new HPPE* in BL-1300 Series models provides about 100 times the information processing capacity of previous models, providing reading performance that combines high speed and high precision.

* HPPE···Hi-Speed Parallel Processing Engine

CODE39: 16 digits

100% decoding rate at 1300 scans/sec is unmatched by conventional barcode readers

New high-speed motor (2.6 times faster than previous models) and high-speed processing engine (HPPE*).* HPPE = Hi-Speed Parallel Processing Engine

HI-SPEED

Minimum readable narrow bar width: 0.08 mm

Digital processing guarantees stable decoding of barcodes with incredibly small margins. This allows codes to be printed smaller without the worry of noise affecting the reader.

HI-RESOLUTION

New digital processing reads very low quality codes

A new edge detection process accurately extracts the points of alternation between bars and spaces in even the most difficult-to-read barcodes, while digital compensation makes it possible to read varying narrow/wide ratios.

HI-PERFORMANCE

17

NX-CO3R (3 m) NX-CO5R (5 m) NX-CO8R (8 m)

EXTENSION CABLECONFIGURATION SOFTWARE

Front Type Side TypeStandard Range High Accuracy Long Range High Accuracy

Single Line BL-1300 BL-1300HA BL-1370 BL-1350HARaster BL-1301 BL-1301HA BL-1371 BL-1351HA

Converts to easily decodable information

Controls the waveform of the received beam to set its amplitude to a level suitable for reading.

Accurately detects the points of alternation between bars and spaces

Acquires the received beam waveform in 10-bit gradations and applies differentiation (shown in waveform diagram on the left).

Removes noise components (signals not relevant to the code information) such as faint printing and background patterns.

Detects points of alternation between bars and spaces (edges).

Modifies the narrow/wide ratio to enable accurate decodingIdentifies bars and spaces from extracted edges. Adjusts the narrow/wide ratio to eliminate the negative impact of running print ink and reader mounting angle.

Scans barcode

Received beam waveform

Binarised waveform

Differential process waveform

AGC

DifferentialProcessing

NoiseReduction

EdgeDetection

NewDecodingEngine

NewDecodingEngine

AGCConverted to

appropriate level

The received beam waveform is converted to a 10-bit digital waveform.

The amount of change increases at the point of alternation between space and bar.

Creates emphasised waveform at point of alternation.

Extracts amount

of change

Modifies ratio

Side typeFront type

THE ORIGINAL DIGITAL PROCESSING TECHNOLOGY SOLVE TYPICAL READING PROBLEMS

Setup softwareSR-H6W

MODEL L INEUP

Reading from diagonal orientation (pitch angle)

Thick print lines

Problem: Spaces are extremely narrow

PREVIOUSMODELS

PREVIOUSMODELS

Thick print lines prevented adequate space between bars, forcing the reader to move to the next bar without obtaining the proper amplitude.

When reading from an angle, previous models couldn’t receive adequate beam intensity, and barcode recognition failed.

BL-1300 Series use noise reduction and edge detection to recognise the difference between spaces and faint printing, enabling accurate decoding.

BL-1300 Series reliably detect edges to recognise barcodes, and use New Decoding Engine to compensate for bar width ratio variations created by tilted orientations.

Problem: Drop in received beam intensity, bar ratio variations

NEW DECODING PROCESS PROVIDES UNRIVALED READING PERFORMANCE:

SOLUTION

SOLUTION

18

Vertical mounting Horizontal mounting Direct wall mounting

BL-700 Series

Long Distance Laser Barcode Reader

With KEYENCE’s laser technology, the BL-700 Series allows an ultra-long distance read. Even if the target size varies, the AGC function ensures a reliable reading through an unparalleled reading depth.

LONGEST READING RANGE IN ITS CLASS: 1.2 m

The slanted corner of the housing allows the cable to be routed in any direction. Since the BL-700 Series requires no space for a connector, it can be neatly mounted anywhere, such as the side of a conveyor, in a space just as large as its body size.

SPACE-SAVING, SLANTED-CORNER DESIGN

With a 32-bit RISC CPU chip and KEYENCE’s control technology, the BL-700 Series achieves 700 scans (700 decodings) per second. An ultra high-speed response that reliably reads barcodes moving at high speed on production lines.

HIGH SPEED: 700 scans/s

High-resolution Middle-range Long-rangeSingle Line BL-700 BL-740 BL-780

Raster BL-701 BL-741 BL-781

MODEL L INEUP

SUPERIOR READING ANGLE CAPABILITIESKEYENCE’s original AGC (Auto Gain Control) provides superior angle reading capabilities. This revolutionary reading capability is outstanding compared to other models.The BL-700 Series provides reliable reading regardless of the orientation or size of the labels.

Reads labels within the range of -55 to +55° angles.

+27˚ +30˚–13˚ –5˚

BL-700

19

The LED shows the performance rate with three colours: green, orange, and red.

Front typeBL-180

Side typeBL-185

80 mm

MODEL L INEUP

BL-180 Series

CCD Barcode Reader

The BL-180 Series features a highly visible STABILITY LED indicator. The optimal mounting position can be determined quickly and easily. Moreover, reading errors can be prevented by checking the reading performance rate or the decode count output.

STABILITY LED FOR EASY MOUNTING

READS BARS AS NARROW AS 0.125 mmThe high-resolution of the BL-180 Series can read bars narrow as 0.125 mm

EXCELLENT READING DEPTH OF ±10 mmReading can be performed even when there are vibrations or height variations in the targets. KEYENCE’s original optical technology and high intensity LED ensure a reading depth of ±10 mm, which enables stable reading.

The BL-180 Series ultra-small CCD barcode reader is easily mounted in any device, allowing the complete system to be downsized. Despite the small size, KEYENCE’s original optical technology achieves a built-in decoder and reads labels as wide as 80 mm.

ULTRA-SMALL BODY 47 × 55 × 20 mm READS LABELS AS WIDE AS 80 mm

20

Barcode reader DV-90Comparison

result

Output

Readout data Output NO. Preset data

DV-90 Series

AutoID Data Controller

The DV-90 compares the data acquired with a code reader to the data registered in advance (preset data) for verification. The evaluation result is output in parallel*. Easy settings without the need for difficult PLC programming.*The output can be selected from bit, binary, and BCD. Up to 900 pieces of master data can be registered.

IMMEDIATE VERIFICATION/

EVALUATION OF CODE DATA

DV-90NE (NPN Type)DV-90PE (PNP Type)

MODEL L INEUP

Prevent incorrect products from being packed

Provide instructions during the assembling process

Prevent careless mistakes during the packaging process

Prevent mistakes when filling chemical bottles

APPLICATION EXAMPLES

PORT1 RS‐232C

Lamp

Buzzer

Synchronisation inputParallel

output

HR Series

Code ReaderBL/SR Series

Code ReaderBL/SR Series

Photoelectricsensor, etc.

USBComputer

PLC

Computer

PLCPORT2 RS‐232C

DV-90

21

SR-700/BL-1300/BL-700/BL-180

N-410K

Host computer

RS-232C

Communication unit N-R4*/N-48

Sensor for synchronisation

SR-700/BL-1300/BL-700/BL-180

N-410K

RS-485

RS-232C

Communication unit N-R4*/N-48

Sensor for synchronisation

N-410 Series

Multi-Drop Controller

The N-410K controls several code readers as if they were a single unit, without using a host computer. This mode is useful when the position of labels varies between work pieces.

MULTI-HEAD MODEThe N-410K controls several code readers so that they scan alternately, eliminating mutual interference. This function is useful when several code readers must be installed close to each other to read a label with multiple codes.

MUTUAL INTERFERENCE PREVENTION FUNCTION

Host computer

The N-410K polls (requests data from) each code reader, and it transmits the obtained data to the host computer.

N-410K

RS-232C

RS-485 Master Unit

RS-485

Up to 31 code readers can be controlled simultaneously.(Maximum total cable extension: 1.2 km)

No data56784321

8901• • • • • • • • • •%P02-00085678%P02-00084321%P03-00088901

* The device that can be connected to the N-R4 is the SR-700/BL-1300. * The device that can be connected to the N-R4 is the SR-700/BL-1300.

22

DEDICATED POWER SUPPLY/COMMUNICATION UNITS

Power Supply/Communication Units

N-R2 N-R4 N-UB N-L1 N-L20

Connectable code reader

SR-700 ü ü ü ü ü

BL-700 ü*1 ü*1 ü*1 ü*1

BL-1300 ü ü ü ü ü

BL-180 ü*1 ü*1 ü*1 ü*1

HR-100 ü*5 ü*5 ü*5 ü*5

HR-100B ü*7

SR-1000

SR-750

Connector type 12 pin round connector

Power typeDC ü ü ü ü ü

AC

Interface

RS-232C ü

USB ü

RS-422A ü

RS-485 ü*3

Ethernet(TCP) ü ü

Field networkEtherNet/IP™ ü

PROFINET ü

Power Supply/Communication Units AutoID Data Controller Multi-Drop Controller

BL-U2 N-42 N-48 DV-90 N-410K

ü*2 ü*2 ü*2 ü*2 ü

ü ü ü ü ü

ü*2 ü*2 ü*2 ü*2 ü

ü ü ü ü ü

ü*6 ü*6 ü*6 ü*6

ü*8 ü*8 ü*8 ü*8

ü*4

ü*4

D-Sub 9 pin D-Sub 25 pin

ü ü ü ü ü

ü ü ü

ü

ü

ü*3

Model Type

OP-80616 Round 12 pin connector - D-sub 9 pin Conversion connector (0.2 m)NX-C03R Extension Cable (3 m) for Round 12 pin connectorNX-C05R Extension Cable (5 m) for Round 12 pin connectorNX-C08R Extension Cable (8 m) for Round 12 pin connectorNX-CD2M D-sub 9 pin connector - Round 12 pin Conversion ConnectorOP-35331 USB cable (3 m)

Model Type

OP-22149 D-sub 25 pin cross connector

OP-27937 D-sub 9 pin - D-sub 9 pin cross cable (2 m)

OP-29859 D-sub 9 pin - D-sub 9 pin straight cable (1.5 m)

OP-29860 D-sub 25 pin - D-sub 9 pin straight cable (1.5 m)

OP-25057 D-sub 9 pin - D-sub 25 pin Conversion Connector

OP-88081 D-sub 9 pin cross connector (without 9 pin)

OP-87533 D-sub 9 pin cross connector

OPTION

NX-CD2MNX-C03ROP-80616

23

FIXED-TYPE READERS

HANDHELD-TYPE READERS

N-L20

DEDICATED POWER SUPPLY/COMMUNICATION UNITS

OPEN F I E LD NETWORK SUPPORT

PC

PLC

HOST

TCP/IPBL-1300SR-700

HR-100BHR-100

BL-180BL-700

BL-N70

Power Supply/Communication Units

N-R2 N-R4 N-UB N-L1 N-L20

Connectable code reader

SR-700 ü ü ü ü ü

BL-700 ü*1 ü*1 ü*1 ü*1

BL-1300 ü ü ü ü ü

BL-180 ü*1 ü*1 ü*1 ü*1

HR-100 ü*5 ü*5 ü*5 ü*5

HR-100B ü*7

SR-1000

SR-750

Connector type 12 pin round connector

Power typeDC ü ü ü ü ü

AC

Interface

RS-232C ü

USB ü

RS-422A ü

RS-485 ü*3

Ethernet(TCP) ü ü

Field networkEtherNet/IP™ ü

PROFINET ü

Power Supply/Communication Units AutoID Data Controller Multi-Drop Controller

BL-U2 N-42 N-48 DV-90 N-410K

ü*2 ü*2 ü*2 ü*2 ü

ü ü ü ü ü

ü*2 ü*2 ü*2 ü*2 ü

ü ü ü ü ü

ü*6 ü*6 ü*6 ü*6

ü*8 ü*8 ü*8 ü*8

ü*4

ü*4

D-Sub 9 pin D-Sub 25 pin

ü ü ü ü ü

ü ü ü

ü

ü

ü*3

*1 NX-CD2M is required. *2 OP-80616 is required. *3 N-410K is required as a master unit. *4 OP-87533 + OP-87527/87528/87529 are required. *5 HR-1C3RC + OP-87533 + NX-CD2M are required. *6 HR-1C3RC + OP-87533 are required. *7 HR-UC1 + HR-1C3RB + OP-88081 + NX-CD2N + OP-87530 + OP-99032 are required. *8 HR-UC1 + HR-1C3RB + OP-88081 + OP-87530 + OP-99032 are required.

24

Distorted codes on curved surfaces

Codes marked on machined surfaces

Codes marked on surfaces with projections and depressions

Glare removal from metal, black resin, etc.

Polarised illumination Multi-angle lights + partial lighting

Enabled for DPM on metals including cylinders and cast surfaces

DPM ON CAST

SURFACE

CYLINDER

HAIRLINE

MULTI-LIGHTING CONTROL FUNCTION

AUTOMATIC SELECTION OF OPTIMAL LIGHTING

Automatic tuning is done just by pushing the function button and reading a code. Use the device on site without the need to carry around a PC.

BUILT-IN FUNCTION BUTTON

EASILY CUSTOMISABLE SETTINGS

• Reading rate testing• Radio wave testing

Assess stability of reading and communication

PRESS

SR-G100

Ultimate Handheld Model with innovative multi-function button

Code correction algorithms, developed for the SR-1000 Series of fixed mount code readers, have been optimised specifically for use with handheld code readers. This allows an ideal balance between reading consistency and speed.

NEW ALGORITHM FOR

HANDHELD DPM CODE READER

HolderSR-HL1

USB cableOP-51580

Setup softwareSR-H6W

SR-G100/SR-LR1for setup

Supports both flat and wall-mounted positions

* A separate AC cable is required with OP-88020 and SR-CG14 products.

AC CABLE L IST OP-99062 (UK) OP-99032 (Germany, France, Italy, Belgium) OP-99022 (USA, Canada)

OP-99042 (China) OP-99102 (Mexico) OP-99112 (Thailand) OP-99012 (Japan)

25

90º

By naturally inducing flat positioning, the SR-G100 reduces the need to worry about variations between users as well as variations in code marking styles. This makes it possible for anyone to perform stable reading.

ERGONOMIC SHAPE THAT ENCOURAGES OPTIMAL POSITIONING

CENTRE-OF-GRAVITY DESIGN

USB CONNECT ION

PC

USB keyboardUSB COM

USB

PLC

HMI [Touch panel]

PC

RS - 232C , E THERNET CONNECT ION

Handheld DPM Code Reader SR-G100

Handheld DPM Code Reader SR-G100

Communication unit (USB)SR-UB1

• 24 VDC • AC adapter (OP-88020*)

Communication unit(Ethernet & RS-232C)SR-LR1

Ethernet

PLC link, TCP/IP, FTP

RS-232C

OUT signal

Rechargeable battery packSR-B1

SR-G100 cableSR-PU1(Approx. 2.5 m)

AC adapterOP-88020*

(Approx. 1.2 m)

4-in-line charging unitSR-CG14*

(incl. OP-88020)

26

WIDE AREA

265 × 195 mm

LARGE READING DEPTH

380 mmREADING CAPABIL IT IES

Type Wireless Wired

Standard HR-100 HR-100

Hi-Resolution HR-101 HR-101

SYSTEM CONFIGURATION

*1 *2 OP-87530 and OP-99032 are changed by each country

RS-232C

RS-232C

HR-1C3RC

HR-1C3RB

HOST OPTION SETUP SOFTWARE

HR-100B/101B MODEL-SPECIFIC OPTIONS

PC

PLC

USB-HIDUSB-COM

PS/2

HR-1C3UN HR-1C3UC HR-1C5UC

HR-1C3VC

OP-87530*1 (AC adapter)

OP-99032*2 (AC cable)





HR-100BHR-101B

HR-100HR-101

HR-UC1

+

OP-87531 (Holder)

OP-87532 (Flexible arm stand)

HR-H1WE

HR-UC1(Communication Unit)HR-PU1(Desktop holder)

HR-B1(Battery pack)

+

+

+

HR-B1

Communication cable

Model HR-1C3UN HR-1C3UC HR-1C5UC HR-1C3RC*1 HR-1C3VC*1 HR-1C3RB*2

Appearance

Cable type Straight Curled

Cable length Approx. 3 m Approx. 5 m Approx. 3 m

Interface USB RS-232C PS/2 keyboard RS-232C

Connector USB (type A) D-sub 9-pin (female) Mini-DIN 6-pin D-sub 9-pin (female)

*1. Only for use with HR-100/101 (wired type) *2. Only for use with HR-100B/101B (wireless type)

HR-100 Series

Handheld 1D and 2D Code Reader

Thanks to a wide reading area and a large depth of field, the code area is easily captured at the push of a button. Furthermore, a high-speed reading that is faster than the conventional handheld readers is provided.

EASY CODE DETECTION INSTANT DECODINGWIDE READING AREA & FASTER READING SPEED

27

MODEL L INEUP

OP-77470 Table top stand

OP-77466 Replacement cable for keyboard interface

OP-77467 Replacement cable for USB

OP-77469 Replacement cable for RS-232C to KEYENCE

Easy to use barcode reader, with minimal setup requirements. Plug-and-play for most applications. Various communication models are available to connect with different PC or PLC systems. Easy setup codes can enable or disable different barcode types. Data output and communication settings can be changed to match existing systems.

BL-N70 Series

Laser Handheld Barcode Reader

OPTION

BL-N70VEPS/2 Keyboard Input Type

BL-N70UBEUSB Keyboard Interface Type

BL-N70RKERS-232C type for connection to DV-90 or N-L20.This runs on 5 VDC power supply on D-sub 9 connector.

SEVERAL CONNECTION TYPES DEPENDING ON APPLICATIONTransmitting bar code data is as easy as connecting the reader to a PC. There is no need for a special power supply or software.

PS2 RS-232C

Special holder for BL-N70 SeriesOP-77470

USB

28

Main unit

Model SR-1000 SR-1000W SR-1000 + SR-10AH

Type Standard type Wide-field type When the high resolution lens attachment is used

ReceiverSensor CMOS Image SensorNumber of pixels 1280 × 1024 pixels

Light emitterIllumination light source High intensity red LEDPointer light source High intensity green LED –

Focus adjustment Autofocus*

Reading specifications

Supported symbol

2D QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF417, GS1 Composite (CC-A/CC-B/CC-C)

Barcode CODE39, ITF, 2of5(Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode

Minimum resolution

2D 0.063 mm 0.082 mm 0.025 mmBarcode 0.082 mm 0.082 mm 0.082 mm

Reading distance 110 mm to 1000 mm 50 mm to 600 mm 20 mm to 40 mm

Field of view for reading 122 × 97 mm(Typical example at 400 mm)

257 × 206 mm(Typical example at 400 mm) 19 × 15 mm(Typical example at 40 mm)

I/O specifications

Control input

Number of inputs 2Input type Bidirectional voltage inputMaximum rating 26.4 VDCMinimum ON voltage 15 VDCMaximum OFF current 0.2 mA or less

Control output

Number of outputs 3Output type Photo MOS relay outputMaximum rating 30 VDCMaximum load current 1 output: 50 mA or less, Total of 3 outputs: 100 mA or lessLeakage current when OFF 0.1 mA or lessResidual voltage when ON 1 V or less

EthernetCommunication standard IEEE 802.3 compliant, 10BASE-T/100BASE-TXSupported protocol TCP/IP, SNTP, FTP, BOOTP, MC Protocol, Omron PLC link, KV STUDIO, EtherNet/IPTM, PROFINET

Serial communication

Communication standard RS-232C compliantTransmission speed 9600, 19200, 38400, 57600, 115200 bpsSupported protocol No-protocol, MC Protocol, SYSWAY, KV STUDIO

USB Communication standard USB 2.0 Full Speed compliant

Environmental resistance

Enclosure rating IP65Ambient temperature 0 to +45°CAmbient storage temperature −10 to +50°C Relative humidity 35 to 85% RH (No condensation)Storage ambient humidity 35 to 85% RH (No condensation)Ambient luminance Sunlight: 10000 lux, Incandescent lamp: 6000 lux, Fluorescent lamp: 2000 luxOperating environment No dust or corrosive gas presentVibration 10 to 55 Hz Double amplitude 0.75 mm, 3 hours each in X, Y and Z directions

RatingPower voltage 24 VDC ±10%Current consumption Approx. 700 mA

Weight Approx. 200 g Approx. 250 g* The focal position can be adjusted automatically during installation.• SR-1000N and SR-1000WN are available as supported models for India.

D IMENS IONSUnit: mm


Main unit SR-1000/1000W

ø5.3

4 × M4Depth: 5

152

180

120123

33

7.5

28

28

(5)

47

2

5250.5

120

123

20.5

38.5 2.6

47.6

18.9

28

74

17

47

28 10°10°

R32

5.3

13

4723.5

20.5

Centre of scanner

ø5.3

4 × M4Depth: 5

152

180

120123

33

7.5

28

28

(5)

47

2

5250.5

120

123

20.5

38.5 2.6

47.6

18.9

28

74

17

47

28 10°10°

R32

5.3

13

4723.5

20.5

Centre of scanner

SPEC I F ICAT IONS


Reflector attachment SR-10AR


*A ø12 mm support is required.

4261.6

47

31.6

49.255.6

19

55

5458.4

19

30

67.180.6

31

2638.5

98°

113.5

Autofocus 1D and 2D Code Reader SR-1000 Series

29

Unit: mm

Unit: mm

Unit: mm

Distance 2D Barcode

20 0.025

0.08220 to 30 0.03

20 to 40 0.04

Image capture range (1280 × 1024 pixels)


Distance Width Height Width Height

20 11 9 7 5

30 15 12 9 7

40 19 15 11 8

Mounting distance

20 911

1915

40

SR-1000 + SR-10AH

MINIMUM RESOLUTION FIELD OF VIEW

Mounting distance

110 2430

312250

1000

SR-1000

SR-1000W

FIELD OF VIEW

Unit: mm

Unit: mm

Distance 2D Barcode

110 0.063

0.082110 to 140 0.082

110 to 230 0.14

110 to 300 0.18 0.11

110 to 400 0.24 0.15

110 to 600 0.37 0.22

110 to 1000 0.61 0.37

Distance 2D Barcode

50 0.0820.082

50 to 100 0.14

50 to 150 0.20 0.12

50 to 230 0.30 0.18

50 to 300 0.38 0.23

50 to 400 0.51 0.31

50 to 600 0.76 0.45




110 30 24 19 14

140 40 32 25 18

230 68 54 42 32

300 90 72 56 42

400 122 97 76 57

600 185 148 116 87

1000 312 250 195 146




50 35 28 22 16

100 67 54 42 31

150 99 79 62 46

230 150 120 93 70

300 194 155 121 91

400 257 206 161 120

600 384 307 240 180

Mounting distance

50 2835

384307

600

MINIMUM RESOLUTIONUnit: mm

FIELD OF VIEW Unit: mm

Unit: mmMINIMUM RESOLUTION

Unit: mm

R EAD ING RANGE CHARACTER I S T ICS [ T Y P ICA L ]

30

Model SR-750HA SR-750 SR-751 SR-752 SR-752 + SR-75L4 SR-752 + SR-75L6Type High-resolution type Close-range type Middle-range type Long-range type With 400 mm lens With 600 mm lens

ReceiverSensor CMOS Image SensorNumber of pixels 752 × 480 pixels

Lighting Light source Red LED

Laser pointer

Light source Visible semiconductor laser, Wavelength 660 nmOutput 60 μWPulse duration 200 μsLaser class Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10*2)


Supported symbol

2D QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF417, GS1 Composite (CC-A/CC-B/CC-C)

Barcode *1 CODE39, ITF, 2of5(Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128,GS1 DataBar, CODE93, JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII

Minimum resolution

2D 0.082 mm 0.127 mm 0.19 mm 0.19 mm 0.33 mm 0.5 mmBarcode – 0.127 mm 0.127 mm 0.17 mm 0.22 mm 0.33 mm

Reading distance(typical examples)

DataMatrixQR

22 to 50 mm(Cell size = 0.25 mm)




300 to 490 mm (Cell size = 0.5 mm)


Barcode –30 to 100 mm

(Narrow bar width= 0.33 mm)

45 to 195 mm(Narrow bar width

= 0.5 mm)


= 0.5 mm)


= 0.5 mm)


= 0.5 mm)

Focal distance 38 mm 60 mm 100 mm 250 mm 400 mm 600 mmField of view (at focal distance) 26 × 17 mm 42 × 27 mm 70 × 45 mm 65 × 41 mm 108 × 69 mm 165 × 106 mm

I/O specifications

Control input

Number of inputs 2Input type Bidirectional voltage inputMaximum rating 26.4 VDCMinimum ON voltage 15 VDCMaximum OFF current 0.2 mA or less

Control output

Number of outputs 3Output type Photo MOS relay outputMaximum rating 30 VDCMaximum load current 1 output: 50 mA or less, Total of 3 outputs: 100 mA or lessLeakage current when OFF 0.1 mA or lessResidual voltage when ON 1 V or less

EthernetCommunication standard 10BASE-T/100BASE-TXSupported protocol TCP/IP, FTP, SNTP, BOOTP, EtherNet/IPTM, PROFINET, MC protocol, KV STUDIO

Serial communication

Communication standard RS-232C compliant Transmission speed 9600, 19200, 38400, 57600, 115200 bpsSupported protocol No-protocol, MC protocol, SYSWAY, KV STUDIO


Enclosure rating IP65Ambient temperature 0 to 45°CAmbient storage temperature -10 to +50°CRelative humidity 35 to 95% RH (No condensation)Storage ambient humidity 35 to 95% RH (No condensation)Ambient luminance Sunlight: 10000 lux, Incandescent lamp: 6000 lux, Fluorescent lamp: 2000 luxOperating environment No dust or corrosive gas presentVibration 10 to 55 Hz Double amplitude 1.5 mm/55 to 500 Hz: Acceleration 5G, 3 hours each in X, Y and Z directions

RatingPower voltage*3 Control port: 24 VDC ±10% or Ethernet port: PoE TypeA/B 36 to 57 V (Cannot supply at the same time)Current consumption Control port: 220 mA (When 24 VDC power supply is used) Ethernet port: PoE Power Class 2*4

Weight Approx. 160 g Approx. 175 g Approx. 185 g*1 Barcodes fitted into the visual field range in size can be read.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 To comply with CSA No.61010-1/UL61010-1/IEC61010-1, use a power supply:

- one that provides Class 2 output as defined in the CEC and NEC, or- one that has been evaluated as a Limited Power Source as defined in CAN/CSA-C22.2 No.60950-1/UL60950-1/IEC60950-1.

*4 Peak operating current for PoE Power Class 2: 210 mA maximum.• PROFINET is a trademark or registered trademark of PROFIBUS International.• EtherNet/IPTM is a trademark or registered trademark of ODVA.

SPEC I F ICAT IONS

PoE & Compact 1D and 2D Code Reader SR-750 Series

Main unit

31

37.5

17.6

30.834.3

1.2

13.2

65

15° 15°

46.4

65

17.6

42.139.1

1.2

11.1

49.2

11.1

15°

42.742.1

54.6 16.2

33.9

31.1

70.5

(114) (110)

(142)(145)

(52.5)

(51)(5.5)(2.5)

(10.5)

(7.5)

47

7.5

10° 10°

20

33

2

Insulatingsheet

5.3

R32

ø5.3

2-M4

Dimension forthe screw holes.

SR-750/751/750HA SR-752 With cable

Mounting bracket

Main unit

Long-focal distance lens SR-75L4/75L6

D IMENS IONS

Unit: mm

100 75 50 25 -25 -50 -75 -1000


SR-750HA: High-resolution type

SR-751: Middle-range type

SR-750: Close-range type

SR-752: Long-range type

40

100

50

0

B

A

30 20 10 -10 -20 -30 -400Readingdistance

Unit: mm

Focal distance60 mm

20

60

40

20

B

A

0

15 10 5 -5 -10 -15 -200

Reading distance

Unit: mm

Focal distance38 mm

Code type Cell size A B

DataMatrixQR

0.08 31 390.127 27 420.25 22 50

Code type Cell size Narrow bar width A B

DataMatrixQR

0.127 50 700.25 40 80

Code390.127 46 740.33 30 100

Code128 0.25 34 90


DataMatrixQR

0.25 65 1300.5 45 165

Code390.127 75 1100.5 45 195

Code128 0.25 50 150


DataMatrixQR

0.19 220 2600.25 210 2700.33 200 2800.5 180 305

Code390.17 220 2600.5 180 330

Code128 0.25 195 275

80

200

150

100

50

B

A

0

60 40 20 -20 -40 -60 -800Reading distance

Unit: mm

Focal distance100 mm

300

250

200

150

B

A

0

Reading distance

Unit: mm


40 30 20 10 -10 -20 -30 -400

SR-752 + SR-75L4 (400 mm lens)


DataMatrixQR

0.33 350 4500.5 300 490

Code390.22 370 4400.5 250 540

Code128 0.25 350 450

600

500

400

300

B

A

0

Reading distance

Unit: mm

Focal distance400 mm200

SR-752 + SR-75L6 (600 mm lens)


DataMatrixQR

0.5 460 6901 330 860

Code390.33 500 6900.5 400 760

Code128 0.33 500 690

800

600

400

200

B

A

0

Reading distance

Unit: mm


100 50 -50 -150-1000150

(46.5)

M12 ø15

OP-87362Ethernet plug assembly

Unit: mm Unit: mm

Unit: mm

Unit: mm

Unit: mm

Unit: mm

32

Model SR-700HA SR-700 SR-710Type High-resolution type Close-range type Middle-range type

Laser pointer

Light source Visible semiconductor laser (Wavelength: 660 nm)Output 60 μWPulse duration 200 µsLaser class Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10*1)

Lighting Light source High intensity red LED

Reading

Supported code

Barcode *2 CODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode

2D code QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF417, GS1 Composite (CC-A, CC-B, CC-C)Minimum resolution

Barcode − 0.127 mm 0.127 mm2D code 0.082 mm 0.127 mm 0.19 mm

Reading distance(typical examples)

Barcode − 30 to 100 mm(Narrow bar width = 0.33 mm)

45 to 195 mm(Narrow bar width = 0.5 mm)

2D code 22 to 50 mm(Cell size = 0.25 mm)



Focal distance 38 mm 60 mm 100 mmField of view (Typical example at focal distance) 26 mm × 17 mm 42 mm × 27 mm 70 mm × 45 mm

I/O

Control input 2 inputs (IN1 and IN2), non-voltage input (contact, solid-state)

Control output4 NPN open collector outputs (OUT1 to 4)

30 mA or less (24 V or less)Residual voltage 0.8 V or less, leakage current 0.1 mA or less

RS-232CTransmission speed 9600, 19200, 38400, 57600, 115200 bpsSupported protocol No-protocol, MC protocol, SYSWAY, KV STUDIO

USB USB 2.0 Full Speed compliant


Enclosure rating IP65Ambient temperature 0 to +45°CAmbient storage temperature -10 to +50°C(No freezing)Relative humidity 35 to 95% RH (No condensation)Ambient luminance Sunlight: 10000 lux, Incandescent lamp: 6000 lux, Fluorescent lamp: 2000 luxOperating environment No dust or corrosive gas presentVibration 10 to 55 Hz Double amplitude 1.5 mm, 3 hours each in X, Y and Z directions

RatingPower voltage 5 VDC +5%, -10%Current consumption 630 mA or less

Weight Approx. 160 g (including cable)

*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*2 Barcodes fitted into the visual field range in size can be read.

D IMENS IONS

Unit: mm

ø5

Centre of scanner

11

13.2

18.5

40

24

3.8

2-M3Depth 4 mm

9.3

3.5

32

33

3.5 24.3

(27.8)

(36.5)

Thickness 13

Cord length 200

Cord length 130

Cord length 1800

53

21

USB for setting, Type A male (for PC connection)

2-(R2.65)

40°

ø5.3

R18R1.5 C17

18.5

5.3

27.5

18

2-M440°

Dimensions of the screw holes

90° ±

1.5°

66

1.5

0.7

2-R1.5

60.8

4-3.3

32

3.5

33

0.70.724.33.5

8-(R1.65)

ø5

Centre of scanner

11

13.2

18.5

40

24

3.8

2-M3Depth 4 mm

9.3

3.5

32

33

3.5 24.3

(27.8)

(36.5)

Thickness 13

Cord length 200

Cord length 130

Cord length 1800

53

21


2-(R2.65)

40°

ø5.3

R18R1.5 C17

18.5

5.3

27.5

18

2-M440°


90° ±

1.5°

66

1.5

0.7

2-R1.5

60.8

4-3.3

32

3.5

33

0.70.724.33.5

8-(R1.65)

ø5

Centre of scanner

11

13.2

18.5

40

24

3.8

2-M3Depth 4 mm

9.3

3.5

32

33

3.5 24.3

(27.8)

(36.5)

Thickness 13

Cord length 200

Cord length 130

Cord length 1800

53

21


2-(R2.65)

40°

ø5.3

R18R1.5 C17

18.5

5.3

27.5

18

2-M440°


90° ±

1.5°

66

1.5

0.7

2-R1.5

60.8

4-3.3

32

3.5

33

0.70.724.33.5

8-(R1.65)MAIN UNIT MOUNTING BRACKET HEAD CABLE

SR-700/710/700HA

SPEC I F ICAT IONS

Main unit

Ultra Compact 1D and 2D Code Reader SR-700 Series

33


Code typeCell size

Narrow bar widthA B

2D0.127 50 70

0.25 40 80

Barcode0.127 46 74

0.33 30 100

SR-700

Code type Cell sizeNarrow bar width A B

2D0.25 65 130

0.5 45 165

Barcode0.127 75 110

0.5 45 195

SR-710

40

100

50

0

B

A


Unit: mm

Focal distance60 mm

80

200

150

100

50

B

A

0


Unit: mm


Code type Cell size A B

2D

0.08 31 39

0.127 27 42

0.25 22 50

SR-700HA Reading distance

Unit: mm

20

50

40

20

B

A

0

15 10 5 -5 -10 -15 -200

Focal distance38 mm

Unit: mm

Unit: mm

Unit: mm

34

Model BL-1300 BL-1301 BL-1300HA BL-1301HAType Standard High-resolutionRead direction FrontLight source Visible-light semiconductor laser (660 nm wavelength)

Output 85 μWPulse duration 112 μsLaser class Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10*1)

Scanning method Single Raster Single RasterFocal distance 120 mm 90 mmReading distance 65 to 500 mm *2 (1.0 mm narrow bar width) 45 to 270 mm *2 (0.5 mm narrow bar width)Readable bar width 0.125 mm 0.08 mmLargest readable label width 339 mm*2 (350 mm distance, 1.0 mm narrow bar width) 189 mm*2 (189 mm distance, 0.5 mm narrow bar width)PCS 0.4 or moreScanning rate 500 to 1300 scans/second

Supported barcodes CODE39, ITF, 2of5(Industrial 2of5), COOP2of5, NW-7(Codabar), CODE128, GS1-128, CODE93, JAN/EAN/UPC, GS1 DataBar

Number of readable digits 74 digits (148 digits with CODE128 start character C)

Environmentalresistance

Enclosure rating IP65Operating ambient illumination Sunlight: 10000 lux, Incandescent lamp: 6000 luxOperating ambient temperature 0 to 45˚CStorage ambient temperature -20 to +60˚COperating ambient humidity 35 to 85% RH, No condensationOperating environment No dust or corrosive gasVibration resistance 10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions, 2 hours respectively

Rated valuesPower supply 5 VDC ±5%Current consumption 400 mA max.

Weight Approx. 115 g

Model BL-1350HA BL-1351HA BL-1370 BL-1371Type High-resolution side Long-distanceRead direction Side FrontLight source Visible-light semiconductor laser (660 nm wavelength)

Output 85 μWPulse duration 112 μsLaser class Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10*1)

Scanning method Single Raster Single RasterFocal distance 65 mm 230 mmReading distance 40 to 250 mm*2 (0.5 mm narrow bar width) 160 to 600 mm*2 (1.0 mm narrow bar width)Readable bar width From 0.08 mm From 0.15 mmLargest readable label width 201 mm*2 (175 mm distance, 0.5 mm narrow bar width) 404 mm*2 (420 mm distance, 1.0 mm narrow bar width)PCS 0.4 or moreScanning rate 500 to 1300 scans/second

Supported barcodes CODE39, ITF, 2of5(Industrial 2of5), COOP2of5, NW-7(Codabar), CODE128, GS1-128, CODE93, JAN/EAN/UPC, GS1 DataBar

Number of readable digits 74 digits (148 digits with CODE128 start character C)


Enclosure rating IP65Operating ambient illumination Sunlight: 10000 lux, Incandescent lamp: 6000 luxOperating ambient temperature 0 to 45˚CStorage ambient temperature -20 to +60˚COperating ambient humidity 35 to 85% RH, No condensationOperating environment No dust or corrosive gasVibration resistance 10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions, 2 hours respectively

Rated valuesPower supply 5 VDC ±5%Current consumption 400 mA max.

Weight Approx. 130 g Approx. 115 g

*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*2 Specifications for 500-scan/second operation • Use the Limited Power Source defined in UL/IEC60950-1 to comply with UL/IEC60950-1. • Internal body settings are written in the internal memory area (can be rewritten 100000 times).

SPEC I F ICAT IONS

Ultra-Compact Digital Barcode Reader BL-1300 Series

Main unit

Input terminals 2 inputs (IN1, IN2), non-voltage input (contact or solid-state)

Outputterminals

Output format 4 (OUT1 through OUT4), NPN open collectorRated load 24 VDC, 30 mAOFF leak current 0.1 mA max.ON residual voltage 0.5 V max.

Serial interface

Communication standard Conforms to EIA, RS-232CBaud rates 600/1200/2400/4800/9600/19200/31250/38400/57600/115200 bpsSynchronisation method Start/stop synchronisationData bit length 7/8 bitsStop bit length 1/2 bitsParity check None/Even/Odd

I/O specifications

35

BL-1300/1301/1300HA/1301HA/1370/1371 (front type)

BL-1300/1301 (standard type) BL-1370/1371 (long-distance type)

BL-1300HA/1301HA (high-resolution front type) BL-1350HA/1351HA (high-resolution side type)

Barcode type

ABC

ED

CODE39CODE39CODE39

CODE39CODE39

0.080.1250.19

0.50.25

65 to 8060 to 14050 to 190

45 to 27045 to 210

55 to 9055 to 140

55 to 26055 to 170

Narrow bar width Read distance (500 scans)

Read distance (1300 scans) Barcode type

ABC

ED

CODE39CODE39CODE39

CODE39CODE39

0.080.1250.19

0.50.25

45 to 6040 to 12040 to 170

40 to 25040 to 190

45 to 7545 to 120

45 to 24045 to 150

Narrow bar widthRead distance

(500 scans)Read distance (1300 scans)

Barcode type

ABC

ED

CODE39CODE39CODE39

CODE39CODE39

0.1250.190.25

1.00.5

85 to 14080 to 22065 to 280

65 to 50065 to 400

80 to 15060 to 200

60 to 45060 to 360


(500 scans)Read distance (1300 scans) Barcode type

ABC

ED

CODE39CODE39CODE39

CODE39CODE39

0.150.190.25

1.00.5

205 to 250190 to 330180 to 380

160 to 600170 to 500

190 to 230

160 to 500160 to 400


(500 scans)Read distance (1300 scans)

Measurement conditions: Standard KEYENCE barcode (narrow/wide bar ratio of 1:2.5); Mounting conditions: 15° skew, 0° pitch, 0° tilt




Foca

l dis

tanc

e

65 m

m

96201

72

050 50100 100

A

BC

DE

Foca

l dis

tanc

e

65 m

m

96194

72

050 50100 100

BC

DE

100

5015

00

200

250

500 scans 1300 scans

Foca

l dis

tanc

e23

0 m

m

404227

0100 100200 200

AB

CD

E

Foca

l dis

tanc

e23

0 m

m

339227180

0100 100200 200

CD

E

200

100

300

040

050

060

0

Foca

l dist

ance

120

mm

339124

500 scans

0100 100200 200

AB

CD

E

Foca

l dist

ance

120

mm

306124

1300 scans

0100 100200 200

020

010

030

040

050

0

BC

DE


Foca

l dis

tanc

e90

mm

96189

68

050 50100 100

AB

CD

E

Foca

l dis

tanc

e

90 m

m

96182

68

050 50100 100

BC

DE

100

5015

00

200

250


R EAD ING D I S TANCES

29.8

16.0

Laser beam29.3

31

22.53.5

3.5

11.5 14.6

33

2 - M3 depth 4

15 (min.)

ø 4.2Cord length: 2 m

3.8

40

21

23.5

Scan centre

2-R 2.65

2-R 2.65

6.53

6

3

5.3

5.3

4026.5

59.6

2.219.6

32.7

11.4

28.02.2

43.6

49.4

15°

Laser beam

7.8

R195.5

14 9

43.4 38.7

2-R 2.752-R 2.75

37.625

5.53

15°

5° 10°

Laser beam

19

26.5

2-M4

2-M4

10°5°

Mounting A (front type) Mounting B (front type)

D IMENS IONS

Unit: mm

Unit: mm

36

Model BL-700 BL-701 BL-740 BL-741 BL-780 BL-781Type High-resolution Middle-range Long-rangeScanning method *1 Single Raster Single Raster Single RasterLight source Visible semiconductor laser (Wavelength: 655 nm)

Output 100 μWPulse duration 50 μs (FDA (CDRH) Part1040.10), 99.5 μs (IEC60825-1)Laser class Class II Laser Product (FDA (CDRH) Part1040.10), Class 2 Laser Product (IEC6085-1)

Reading distance 160 to 370 mm(When narrow bar width is 0.5 mm)

150 to 750 mm(When narrow bar width is 1.0 mm)

200 to 1200 mm(When narrow bar width is 2.0 mm)

Reading bar width *2 0.15 to 1.0 mm 0.25 to 2.0 mm 0.32 to 2.0 mm

Largest readable label width *3 310 mm(When reading distance is 335 mm)

600 mm(When reading distance is 680 mm)

1010 mm(When reading distance is 1080 mm)

PCS 0.6 or more (Reflectance of white part: 75% or more)Scanning rate 700 scans/secTarget code CODE39, ITF, 2of5(Industrial 2of5), COOP2of5, NW-7(Codabar), CODE128, GS1-128, CODE93, JAN/EAN/UPCNumber of readable digits 32 digits max. *4

Trigger input Non-voltage input (contact, solid-state), TTL input is also possible.

Serialinterface

Applied standard RS-232CSynchronisation Start-stopTransmission code ASCIIBaud rate 600/1200/2400/4800/9600/19200/31250/38400 bpsData length 7/8 bitsParity check None/Even/OddStop bit length 1 bit/2 bits

OK/NGoutput

Output form NPNRated load 24 VDC, 30 mALeakage current (at OFF) 0.1 mA max.Residual voltage (at ON) 0.5 V max.


Enclosure rating IP65

Ambient light Sunlight: 10000 lux, Incandescent lamp: 6000 lux

Sunlight: 10000 lux, Incandescent lamp: 4000 lux

Sunlight: 8000 lux , Incandescent lamp: 3000 lux

Ambient temperature 0 to 40°C, No condensation Relative humidity 35 to 85%, No condensationOperating atmosphere No dust or corrosive gas presentVibration 10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions, 2 hours respectively

Power ratingPower supply voltage 5 VDC ±5%Current consumption 510 mA max.

Weight Approx. 300 g (including cable)

*1 BL-701 raster width: 10 ±1 mm (reading distance: 200 mm) BL-741 raster width: 20 ±2 mm (reading distance: 300 mm) BL-781 raster width: 30 ±3 mm (reading distance: 450 mm)

*2 When the barcode type is CODE39.*3 Largest reading label width includes the barcode margin (quiet zone).*4 When start/stop character of CODE128 is CODE-C, up to 64 digits are allowed.• The internal BL settings are written to the built-in EEPROM (erasable up to 100000 times).

SPEC I F ICAT IONS

BL-1350HA/1351HA (side type)

18.7 17.6

15°Laser beam

41.6

22 3.5

3.5

38.1

48

2 - M3depth 4

11.5

21

3.815 (min.)

48

6.5

ø 4.2Cord length: 2 m

23.5

Scan centre

365.55.3

5.3

18.7

15°

Laser beam

21 1.6

3

3

1138.5

21

41.6

67.6

48

19.62.2

2-R 2.652-R 2.65

362-M4

Mounting (side type)

D IMENS IONS

Unit: mm

Long Distance Laser Barcode Reader BL-700 Series

Main unit

37

D IMENS IONS

Unit: mm

Unit: mm

400500600 300 200 100 0 100 200 300 400 500 600

Readable label width

BCD

320

480

580

870

1100

1200

200

A

1010900700435465400

400 300 200 100 0 100 200 300 400Readable label width

B A ECD

230

440490

330360

550

750

650

150

600510430350330348300

400

(Foc

al di

stan

ce)

200 100 0 100 200

Readable label width

BECD

370

300275

320325

310275270254210215185

A

230

(Foc

al di

stan

ce)

205190185175160

(Measuring conditions)• The KEYENCE standard barcode is used.• Skew: 0°• Pitch: 0°• Tilt: 0°• Ratio 1:2.5• Including the margins



ABCDE

Narrow bar width0.15 mm0.19 mm0.25 mm0.5 mm1 (EAN)

ABCD

Narrow bar width0.32 mm0.5 mm1.0 mm2.0 mm

ABCDE

Narrow bar width0.25 mm0.32 mm0.5 mm1 mm

1 (EAN)

500

(F

ocal

dist

ance

)

* The laser beam radiates at 10 ±0.5° perpendicular to side (A).

9.9

53

(A)

Laser beam

( )

10°

26.5

58 51.5

3.2546.53.25

28.5

Laser transmitter

2 - ø3.5mounting hole

ø5.8Cable length 1.8 m

36

*

BL-700 Series

BL-700/701 BL-740/741 BL-780/781

R EAD ING D I S TANCES

38

* The laser beam radiates at 10 ±0.5° perpendicular to side (A).

9.9

53

(A)

Laser beam

( )

10°

26.5

58 51.5

3.2546.53.25

28.5

Laser transmitter


36

15

2 × 2-M3Depth 5 mm or less

55 20

55

36

15 36

6

4

6

4

ø10537

33Receiver axis 1012.5

26

2 × 2-M3Depth 5 mm or less

47 20

55

17

26 17

10

4

10

ø10

4

5

29 33

Receiver axis

10

15.3

80

(Rea

dabl

e la

bel w

idth

)

*

80

(Rea

dabl

e la

bel w

idth

)

Front-view type Side view type

ø5.8Cable length 1.8 m

ø4.5Cable length1.8 m

ø4.5Cable length1.8 m

Model BL-180 BL-185Model (with connector) BL-180SO (7030) BL-185SO (7031)Reading direction Front SideLight source/Light receiving element LED/CCD image sensorScanning distance 33 ±10 mm *1 (Using narrow bars of at least 0.19 mm in width)Readable bar width *2 0.125 to 1.0 mmLargest readable label width 80 mm *3 (Using narrow bars of at least 0.19 mm in width)PCS 0.45 or more (Reflectance of white part: 75% or more)Scanning rate 500 scans/secTarget code CODE39, ITF, 2of5(Industrial 2of5), COOP2of5, NW-7(Codabar), CODE128, JAN/EAN/UPCNumber of readable digits 32 digitsTrigger input Non-voltage input (contact or solid-state), TTL input is also possible.

Serialinterface

Applied standard RS-232CSynchronisation Start-stopTransmission code ASCIIBaud rate 600/1200/2400/4800/9600/19200/31250/38400 bpsData length 7/8 bitsParity check None/Even/OddStop bit length 1 bit/2 bits

OK/NGoutput

Output form NPNRated load 24 VDC, 100 mALeakage current (at OFF) 0.1 mA max.Residual voltage (at ON) 0.5 V max.


Ambient light Sunlight, Incandescent lamp: 10000 lux, Fluorescent lamp: 3000 lux.Ambient temperature 0 to 40°C, No condensationRelative humidity 35 to 85%, No condensationOperating atmosphere No dust or corrosive gas presentVibration 10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions, 2 hours respectively

Power ratingPower supply voltage 5 VDC ±5% *4

Current consumption 300 mA max. Weight Approx. 165 g Approx. 180 g

*1 33 ±5 mm when the narrowest bar is less than 0.19 mm.*2 Readable bar width indicates the range of the narrowest readable bar.*3 60 mm when the narrowest bar is less than 0.19 mm.*4 Use a stable power supply of 5 VDC ±5%. The BL-U2 special power unit is available as an option.•The internal BL settings are written to the built-in EEPROM (erasable up to 100000 times).

D IMENS IONS

Unit: mm

Read

able

labe

l wid

th

60

10

OK/NG

BL-180 STABILITY

80

A

B

10

Reading distance3355

(Measuring conditions)• The KEYENCE standard barcode is used.• Skew: -10°• Pitch: 0°• Tilt: 0°

AB

Narrow bar widthLess than 0.19

0.19 Min.

BL-180/185BL-180 Series

SPEC I F ICAT IONS

READ ING D I S TANCES

CCD Barcode Reader BL-180 Series

Main unit

135

85

134.8

52.3

95.5

5.9

5.9

116.8145.5

26

84.8

6

(64.2)

1.6 to 4.0

+10

+10

Panel thickness:4-ø3.4 d = 6(for M4 tapping screw)

21.8

26

26

26.8

60

90100112

40

SD RD RS CS

POWER TIMING SD RD

RS-232C

RS-232C

RS-485

TERMINATOR

ONOFF

4 × ø5mounting hole

51

27.3

35.4

60

90100112

40

SD RD RS CS

POWER TIMING SD RD

RS-232C

RS-232C

RS-485

TERMINATOR

ONOFF

4 × ø5mounting hole

51

27.3

35.4

39

DIMENSIONS

DIMENSIONSSPEC I F ICAT IONS

Unit: mm

Unit: mm

Model DV-90NE (NPN output), DV-90PE (PNP output) Applicable barcode reader SR-1000/750/700/G100*1, BL-1300/700/600/180/N70RKE, HR-100*2

Registered preset data number 900 max.Memory backup Flash ROM (Rewritable: 100000 times)

I/O terminal

Input (4 points)• Trigger input (2 points)• Unlock input• Remote input

Rated input voltage 10 to 26 VDC, 10 mA, Class 2

Maximum OFF current 1.0 mA

Output (16 points)• Out 1 through 12• OK output• NG output• Read error output• Quality error output

Output form DV-90NE: NPN Open-collectorDV-90PE: PNP Open-collector

Rated load 30 VDC, 100 mALeakage current at OFF 0.1 mA max.Residual voltage at ON Less than 1 V

Serial interface

PORT1(For connecting code reader)

PORT2(For connecting PC, PLC, or code reader)

Applied standards RS-232CSynchronisation AsynchronousBaud rate 600 to 115200 bpsData length 7/8 bitsParity check None/Even/OddStop bit length 1 bit/2 bits

USB (Special for connecting PC) USB 2.0 (B type) (Communication speed fixed to 115200 bps)

Power outputPower for barcode reader 5 VDC ±5%, 1100 mA max. (at the ambient temperature of 0 to 40°C)

850 mA max. (at the ambient temperature of 40 to 50°C)Power for sensor 24 VDC ±10%, 250 mA max.


Enclosure rating IP65 (only the front panel when panel-mounted)Ambient temperature 0 to 50°C, No condensationRelative humidity 35 to 85%, No condensationOperating atmosphere No dust or no corrosive gas present

Power ratingPower supply voltage 24 VDC ±10%, Class 2Current consumption 850 mA max.


*1 To connect the SR-1000/750, the OP-87533 and the OP-87527/87528/87529 are required. To connect the SR-G100, SR-LR1,OP-27937 are required*2 To connect the HR-100, the HR-1C3RC/OP-87533 are required. To connect the HR-100B, HR-UC1/HR-1C3RB/OP-88046/OP-99012/OP-88081 are required

Model N-410KConnectable code reader SR-700, BL-1300/700/600/180 SeriesTriggerinput

Rated input 15 to 26.4 VDC, 10 mA max.Max. OFF current 1.0 mA

RS-232C

Applied standards RS-232CSynchronisation Start-stop (Full-duplex)Transmission code ASCIIBaud rate 9600/19200/38400/57600/115200 bpsData length 7/8 bitsParity check Even/Odd/NoneStop bit length 1 bit/2 bits

RS-485

Applied standards RS-485Synchronisation Start-stop (Full-duplex)Transmission code ASCIIBaud rate 600 to 115200 bpsData length 7/8 bitsParity check Even/Odd/NoneStop bit length 1 bit/2 bitsMax. number of connectable units 31

Max. total extension distance 1.2 km


Ambient temperature 0 to 55°C, No condensationRelative humidity 35 to 85%, No condensation

Powerrating

Power supply voltage 24 VDC (+10%, -20%)Current consumption 80 mA max.


SPEC I F ICAT IONS

AutoID Data Controller DV-90 Series

Multi-Drop Controller N-410 Series

Main unit

Main unit

40

Model BL-U2 N-42 N-48Conversion interface — RS-232C RS-422A (Level conversion) RS-232C RS-485 (Level conversion)Connectable barcode reader BL-700/600/180 Series BL-1300/700/600/180 Series, SR-700 Series*Power supply for barcode reader 5 VDC ±5% (630 mA)

Trigger inputInput rating 8.5 to 26 VDC, 10 mA max. 15 to 26 VDC, 10 mA max.Max. OFF current 1.0 mA

Interface Conforms to RS-232C approved by EIA RS-422A (Max. total extension distance: 1.2 km) RS-485 (Max. number of connectable units: 31)(Max. total extension distance: 1.2 km)

Power ratingPower supply voltage 24 VDC, +10%, -20% Current consumption 250 mA max. 260 mA max.

Weight Approx. 80 g Approx. 100 g

* To connect the BL-1300 or SR-700, the OP-80616 conversion cable (sold separately) is required. In this situation, the communication baud rate is capped at 38400 bps.

Model N-R2 N-R4 N-UB N-L20Power supply for the code reader 5 VDC ±5% (650 mA)

Envi

ronm

ent

resi

stan

ce

Operating surrounding air temperature 0 to 50°CStorage ambient temperature -20 to +60°COperating ambient humidity 35 to 85% RH, No condensationOperating atmosphere No dust or corrosive gases present

Vibration resistance 10 to 55 Hz, complex amplitude 1.5 mm, 2 hours in each of X, Y, and Z directions10 to 55 Hz Vibration amplitude:

0.3 mm 2 hours each in X, Y, and Z directions

RatingPower voltage 24 VDC (+10%, -20%)Consumption current 380 mA or less

Mass Approx. 135 g Approx. 135 g (excluding the connector) Approx. 155 g Approx. 150 g

Term

inal

blo

ck

Input

Number of pins 2 (IN1 and IN2)Input format Bidirectional voltage inputInput maximum rating 26.4 VDCMinimum ON voltage 15 VDCMaximum OFF current 1 mA

Output

Number of pins 4 (OUT1 to 4)Output format Photo MOS relay outputOutput rating load 30 VDC, 100 mA*OFF time leak current 0.1 mA or lessON time residual voltage 1 V or less

Host interface 15 m or less (including the head cable) 1.2 km or less 5 m or less 100 m or less

* Both NPN and PNP input devices are supported.

SPEC I F ICAT IONS

Dedicated Power Supply/Communication Units

41

D IMENS IONS

Unit: mm

98

4

110

Approx. 40

90

4150

186

50

91 max.

100 to 240 VAC ø6.5, Cable length: 2 m

ø4.5

120°

mounting hole

43.2

5.95.9

63.2


75

55

5.5

5.5

21

BL-U2

40.3

35.8

44.257

133.8

4.8

(128.5)

49.9

R40

41.8

44.245

122.3

4.2

41.8R40

(128.5)

28.3

35.8

45

4.2

122.3

28.3

R40

44.2

128.557.4

41.8

35.8

60

113

3.5

52

38.9

35.9

(74.2)

(148.1)

R40

43.2

5.95.9

55

5.52 - ø4.5mounting hole

SD RDPOWER

READER

TERMINATOR

ONOFF

N-48

63.2

75 26

N-R2

N-UB

N-R4

N-L20

N-42/N-48

42

Model OP-88020Rated input 100 to 240 VAC, 50/60 HzRated output 12 VDC, 1.5 A max.Dimensions 104 × 43 × 31 mm (excl. cable area)Weight Approx. 125 g

• Using SR-PU1 or SR-LR1. AC cable required separately.

AC adapter

Model SR-UB1

Communication specifications

Wireless communication Bluetooth Ver. 2.1 + EDR Class 2Wireless communication distance Approx. 10 m (line-of-sight)USB communication USB 2.0 Full SpeedInterface USB-COM, USB keyboard


Ambient temperature 0 to +45°CAmbient storage temperature -10 to +50°CRelative humidity 35 to 95% RH (No condensation)Ambient storage humidity 35 to 95% RH (No condensation)

Rating Current consumption Approx. 80 mADimensions 20.6 × 11.2 × 65.4 mmWeight Approx. 15 gSupported OS Microsoft Windows 8 Professional or later 32bit/64bit (Except for Windows RT), Microsoft Windows 7 Professional or later 32bit/64bit

Communication unit (USB)

Model SR-LR1


Wireless communication Bluetooth Ver. 2.1 + EDR Class 2Wireless communication distance Approx. 10 m (line-of-sight)

RS-232C9600, 19200, 38400, 57600, 115200 bpsNo-protocol, MC protocol, SYSWAY, KV STUDIO

EthernetIEEE 802.3, 10BASE-T / 100BASE-TXTCP/IP, FTP, MC protocol, Omron PLC link, KV STUDIO, EtherNet/IPTM, PROFINET

Control output

Number of points 3Output format Photo MOS relayMaximum rating 30 VDC, 100 mALeakage current when OFF 0.1 mA or lessResidual voltage when ON 1 V or less


Ambient temperature 0 to +45°CAmbient storage temperature -10 to +50°CRelative humidity 35 to 95% RH (No condensation)Ambient storage humidity 35 to 95% RH (No condensation)

Rating Power voltage / current consumption 24 VDC ±10% / Approx. 120 mA, or use dedicated AC adapter (12 VDC) / Approx. 230 mADimensions 62 × 125.8 × 40 mmWeight Approx. 160 g

Communication unit (Ethernet & RS-232C)

Handheld DPM Code ReaderModel SR-G100

ReceiverSensor CMOS image sensorNumber of pixels 900 × 900 pixels (2D code), 1280 × 900 pixels (Barcode)

Light emitter Illumination light source High-intensity red LED, High intensity blue LED


Supported symbol

2D code QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF417, GS1 Composite (CC-A/CC-B/CC-C)

Barcode CODE39, ITF, 2of5(Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode

Minimum resolution

2D code 0.127 mmBarcode 0.1 mm

Focal distance 30 mm


Wireless communication Bluetooth Ver. 2.1 + EDR Class 2Wireless communication distance Approx. 10 m (line-of-sight)Setup communication USB 2.0 Full Speed


Enclosure rating IP54Ambient temperature 0 to +45°C / When charging: 0 to +40°CAmbient storage temperature -10 to +50°CRelative humidity 35 to 95% RH (No condensation)Ambient storage humidity 35 to 95% RH (No condensation)Ambient light Sunlight: 10000 lux, Incandescent lamp: 6000 lux, Fluorescent lamp: 2000 luxOperating environment No dust or corrosive gas presentDrop resistance* 2.0 m, 50 times

Rating Power consumption Approx. 8.5 WDimensions 214 × 78.5 × 97.4 mm Weight Approx. 375 g (incl. rechargeable battery pack)Continuous usage time (Central value) Approx. 10 hours (reading count: 10000)Charging time Approx. 4.5 hours• This is a test value and is not guaranteed.

SPEC I F ICAT IONS

Ultimate Handheld Model with capability of handling SR-G100

43

D IMENS IONS

Unit: mm

FIELD OF VIEW FOR READING (TYPICAL)

Handheld DPM Code ReaderSR-G100

HolderSR-HL1

Communication unit (Ethernet & RS-232C)SR-LR1

4-in-line charging unitSR-CG14

SR-G100 CableSR-PU1

Connected (SR-G100 + SR-PU1)

Wall-mounted

Horizontal type

129

1.1

1.1

40.2

107.8

49

158

162

2020

40 11

4 × ø4.8125.8

62

(14.7)

110

52

5

(66)R33

(238.5)

(117.3)

(269.3)

100

4 × ø4.8

109.7

103.2

31

24

66

18.4

(240.4)

(214)

(137.9)

(134)

21.5

247.1

ø10.6

57.938

39.6 2530

6.5

52.4

42

63.4

16214

97.4

34

5378.5

Distance Minimum resolution Horizontal Vertical

30 0.127 45 45

70 0.25 65 65

110 0.5 85 85

Distance Minimum resolution Horizontal Vertical

80 0.25 99 70

120 0.5 127 90

200 1 184 129

2D code Barcode

44

Model HR-100 HR-100B HR-101 HR-101BType Standard High resolutionInterface Wired Wireless Wired WirelessLight source Red LED


Supported symbol

2D QR, MicroQR, DataMatrix (ECC200), PDF417, MicroPDF417, GS1 Composite (CC-A/CC-B/CC-C), MaxiCode, AztecCodeBarcode CODE39, ITF, 2of5(Industrial 2of5), NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC, MSI, Postal, CODE11, 2of5

Minimum resolution

2D 0.169 mm 0.127 mmBarcode 0.127 mm 0.076 mm

Reading distance

2D 15 to 180 mm (Cell size = 0.254 mm) 0 to 114 mm (Cell size = 0.254 mm)Barcode 25 to 115 mm (Narrow bar width = 0.127 mm) 0 to 96 mm (Narrow bar width = 0.127 mm)

Wireless Standard — Bluetooth version 2.1 — Bluetooth version 2.1


Ambient temperature 0 to 50°CRelative humidity 5 to 95% RH (no condensation)Ambient light Sunlight: 10000 lux, Fluorescent lamp: 2000 luxDrop impact resistance 1.8 m 50 times on concrete

RatingPower voltage 4.0 to 5.5 VDC — 4.0 to 5.5 VDC —Current consumption Reading: 450 mA, Standby: 90 mA — Reading: 450 mA, Standby: 90 mA —

Operating time (when using HR-B1)* — Approx. 14 hours — Approx. 14 hoursDimensions 161 × 86 (head) × 71 mm (head)Weight Approx. 150 g Approx. 225 g Approx. 150 g Approx. 225 g

*Typical example at 1 scan/s

HR-100B/101B optionsModel HR-UC1 HR-PU1

Type Communication Unit Desktop holder

Wireless Standard Bluetooth version 2.1 -

RatingPower voltage 4.5 to 5.5 VDC

Current consumption (with AC adapter) 1000 mA

Charging time (with AC adapter) Approx. 4.5 hours

Dimensions 81 × 132 × 101 mm


Model BL-N70VE BL-N70UBE BL-N70RKE

Interface PS2 USB RS-232CFor KEYENCE products

Connector type Mini-DIN 6-pin USB (Type A) D-sub 9-pin (female)Light source Visible red semiconductor laser (Wavelength 650 nm)

Output 40 µWPulse duration 1.5 msLaser class Class 1 Laser Product (IEC 60825-1, FDA (CDRH) Part1040.10*)

Reading distance 0 to 177 mm (When the narrow bar width is 0.66 mm)Resolution 0.125 mm min.PCS 0.35 min.Scanning rate 72 scans per secondTarget codes CODE39, ITF, 2of5(Industrial 2of5), NW-7(Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPCReadable bar width Maximum 3 to 40 digits (80 digits with CODE128 CODE-C)


Ambient light 4800 luxAmbient temperature 0 to 40°CRelative humidity 35 to 85% RH, No condensationOperating atmosphere No dust or corrosive gas

RatingsPower supply 5 VDC ±5%Current consumption 200 mA max.

EMI EN 55022, Class BWeight Approx.100 g

*The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.

SPEC I F ICAT IONS

SPEC I F ICAT IONS

Handheld Code Reader

Handheld 1D and 2D Code Reader HR-100 Series

Laser Handheld Barcode Reader BL-N70 Series

Main unit

45

0 1 2 3

Mounting distance

110 2430

312250

1000Unit: mm

Unit: mm

Distance 2D Barcode

110 0.063

0.082110 to 140 0.082

110 to 230 0.14

110 to 300 0.18 0.11

110 to 400 0.24 0.15

110 to 600 0.37 0.22

110 to 1000 0.61 0.37

MINIMUM RESOLUTIONSR-1000

Light from Code Reader

Make sure to install the reader at an angle.

3 STEPS WE NEED TO CHECK FOR STABLE READING

Specular Light

Specular Light

HOW TO BE A 1D/2D CODE SPECIAL IST WITH PROFESSIONAL SUPPORT FROM KEYENCE

Narrow Bar (NB) Width and Cell Size (CS)NB width is the thickness of the thinnest bar in a barcode, and CS is the size of the smallest 2D code cell (1 square).1.

Reading DistanceReading Distance depends on the NB width or the CS and the specification of each models. We need to check the code’s specifications before we define the true maximum reading distance.

2.

Installation PositionGenerally speaking, the code readers need to be installed at an angle to reduce specular light.In the case of the SR-1000 Series, mounting at an angle is not necessary because the SR-1000 Series has polarised lighting.

3.

15°

46

(1) Narrow bar width (NB): Thinnest bars(2) Wide bar width (WB): Thickest bars(3) Narrow space width (NS): Thinnest space(4) Wide space width (WS): Thickest space

Ratio - NB:WB = NS:WS = 1:2 to 1:3Quiet zoneWhite space of 10 times wider than the narrow bar width: must be included at the beginning and the end of a barcode in order for the reader to identify the beginning and the end of a code.

① ③ ②

④

Quiet zone

Cell

Quiet zone

Quiet zone (required for the 4 directions surrounding the code)

Quiet zone width Width of 1 cell

Alignment pattern L-shaped part

Quiet zone (required for the 4 directions surrounding the code)

QR Quiet zone width Width of 4 cellsMicroQR Quiet zone width Width of 2 cells

Alignment pattern 3 corners (QR) or 1 corner (microQR)

A 2D code quality verification standard established by the International Organisation for Standardisation.This standard is mainly used for evaluation of 2D codes printed on labels.

ISO/IEC 15415

This section introduces typical code quality verification standards.

DataMatrix QR

A 2D code quality verification standard for direct part marking (DPM) established by the Automatic Identification Manufacturers. This standard was established based on ISO/IEC15415 and also standardised by International Organisation for Standardisation in 2011.

ISO/IEC TR 29158 (AIM DPM-1-2006)

BARCODE

2D CODE

Quiet zone

Cell

TYPES OF 2D CODE VERIFICATION STANDARDS

Simple & Quick Solutions

KEYENCE draws from its decades of experience to provide the solution and troubleshooting techniques. Valuable knowledge of lighting, optics and 1D/2D codes is available for download.

Comprehensive Guides

References for installation, setup, and operation are also available for download to simplify the integration of KEYENCE barcode readers.

Free resource guides provide barcode basics, troubleshooting tips, and real applications

www.barcodereader.com

Your online portal to...A complete knowledge centre to assist you with all of your Auto ID needs

Get Useful Technical Literature FREE!

WOULD YOU LIKE TO LEARN MORE ABOUT

AUTO ID TECHNOLOGY?

BL-EU-GC9-GB 1057-1 600N05 Copyright (c) 2017 KEYENCE CORPORATION. All rights reserved.

www.keyence.com

NB=0.25 mm, NB:WB=1:2.5 NB=0.5 mm, NB:WB=1:2.5 NB=1.0 mm, NB:WB=1:2.5

CODE39

NB=0.25 mm, NB:WB=1:2.5 NB=0.5 mm, NB:WB=1:2.5 NB=1.0 mm, NB:WB=1:2.5

ITF

UPC-A EAN CODE128

Cell size=0.25 mm Cell size=0.25 mm

Cell size=0.63 mm Cell size=0.63 mm

Data Matrix

Cell size=0.25 mm

Cell size=0.63 mm

Cell size=0.25 mm Aspect Ratio=1:3

Cell size=0.63 mm Aspect Ratio=1:3

QR PDF417

NB=0.33 mm, bar width ratio=1:2:3:4 NB=0.25 mm, bar width ratio=1:2:3:4NB=0.33 mm, bar width ratio=1:2:3:4

Date post:	10-Jul-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Auto ID - Movetec · USB cable plugA-miniB 2 m: OP-51580 Control cable 2 m: OP-87224 5 m: OP-87225...

Documents