4 x 75 W High Power Output ISOConnectorsforPowerSupplyandSpeakerOutputs RDS(RadioDataSystem)Function FMStereoRadio USBPort&SD/MMCMemoryCardSlot Support A2DPFunction RCAOut&AUXINSocket FullDetachablePanel Built-inBluetoothhands-freeSystem LCDDigitalDisplay CARCD/MP3PLAYERWITHESP DISP 9 AUX IN MOD SCN Push SEL SHF RPT ENT PTY MIC 2
MCD263BT BUILT-IN BLUETOOTH CD/MP3 CAR RADIO 4 x 75 W High Power Output PLL Synthesizer Tuner Anti-Shock Mechanism LCD Digital Display USB Port & SD/MMC Memory Card Slot ISO Connectors for Power Supply and Speaker Outputs FM Stereo Radio RCA Out & AUX IN Socket Support A2DP Function RDS (Radio Data System) Function Built-in Bluetooth hands-free System Full Detachable Panel User’s Manual AUX IN Push SEL TA AF MENU BAND PTY MOD MIC 0 1 SCN 2 RPT 3 4 5 6 CAR CD/MP3 PLAYER WITH ESP SHF 7 8 DISP 9 ENT AMS - 10 + 10
Transcript
MCD263BT
BUILT-IN BLUETOOTH CD/MP3 CAR RADIO
4 x 75 W High Power Output
PLL Synthesizer Tuner
Anti-Shock Mechanism
LCD Digital Display
USB Port & SD/MMC Memory Card Slot
ISO Connectors for Power Supply and Speaker Outputs
FM Stereo Radio
RCA Out & AUX IN Socket
Support A2DP Function
RDS (Radio Data System) Function
Built-in Bluetooth hands-free System
Full Detachable Panel
User’s Manual
AUX IN
Push
SEL
TA AF
MENUBAND
PTY
MOD
MIC
0 1
SCN
2
RPT
3 4 5 6
CAR CD/MP3 PLAYER WITH ESP
SHF
7 8
DISP9
ENT
AMS - 10 + 10
Page CONTENTS
01 Contents
02 Installation
04 Using the detachable front panel
05 Wiring Diagram
06 Operations
General Operations
0 Radio Operations
CD/MP3 Operations
1 Mixed-CD Operations
1
1 Disc Notes
06
07
12 USB Device Operations
13 SD/MMC Card Operations
3 AUX in Operations
13 Bluetooth hands-free Function
17 Trouble Shooting
Location and Function of Keys
9
09 RDS (Radio Data System) Operations
11 /WMA Disc
2
15 Specifications
6
Notes:
- Choose the mounting location where theunit will not interfere with the normal drivingfunction of the driver.
- Before finally installing the unit, connectthe wiring temporarily and make sure it is allconnected up properly and the unit and thesystem work properly.
- Use only the parts included with the unit toensure proper installation. The use ofunauthorized parts can cause malfunctions.
- Consult with your nearest dealer ifinstallation requires the drilling of holes orother modifications of the vehicle.
- Install the unit where it does not get in thedriver's way and cannot injure thepassenger if there is a sudden stop, like anemergency stop.
- If installation ang e exceeds 30°fromhorizontal, the unit might not give itsoptimum performance
l
- Avoid installing the unit where it would besubject to high temperature, such as fromdirect sunlight, or from hot air, from theheater, or where it would be subject to dust,dirt or excessive vibration.
Din Front/Rear-MountThis unit can be properly installed either
from 'Front' (conventional DIN Front-mount)or 'Rear' (DIN Rear-mount installation,utilizing threaded screw Holes at the sidesof the unit chassis). For details, refer to thefollowing illustrated installation methods.
Installing the unit
Be sure you test all connections first, andthen follow these steps to install the unit.1. Make sure the ignition is turned off, andthen disconnect the cable from the vehiclebattery's negative (-) terminal.
5. The two supplied keys release tabsinside the unit's sleeve so you can removeit. Insert the keys as far as they will go (withthe notches facing up) into the appropriateslots at the middle left and right sides of theunit. Then slide the sleeve off the back ofthe unit.
2. Disconnect the wire harness and theantenna.
3. Press the button on the front panel andremove the control panel (For details, referto 'using the detachable front panel').
4. Lift the top of the outer trim ring then pullit out to remove it.
Installation OpeningThis unit can be installed in any dashboardhaving an opening as shown below:
Installation
1. DIN FRONT-MOUNT (Method A)
53mm
182mm
Take Out Screw Before InstallationBefore install the unit, please remove thetwo screws.
7. Reconnect the wire harness and theantenna and be careful not to pinch anywires or cables.
8. Slide the unit into the sleeve until it locksinto place.
9. To further secure the unit, use thesupplied metal strap to secure the back ofthe unit in place. Use the supplied hardware(Hex Nut (M5mm) and Spring Washer) toattach one end of the strap to the mountingbolt on the back of the unit. If necessary,bend the metal strap to fit your vehicle'smounting area. Then use the suppliedhardware (Tapping Screw (5x25mm) andPlain Washer) to attach the other end ofmetal strap to a solid metal part of thevehicle under the dashboard. This strapalso helps ensure proper electricalgrounding of the unit.
Note: Install the short threading terminal ofthe mounting bolt to the back of the unit andthe other long threading terminal to thedashboard.
6. Mount the sleeve by inserting the sleeveinto the opening of the dashboard and bendopen the tabs located around the sleevewith a screwdriver. Not all tabs will be ableto make contact, so examine which oneswill be most effective. Bending open theappropriate tabs behind the dashboard tosecure the sleeve in place.
10. Reconnect the cable to the vehiclebattery's negative (-) terminal. Thenreplace the outer trim ring and install theunit's front panel (see the steps of 'to installthe front panel').
1. Make sure the ignition is turned off, andthen disconnect the cable from the vehiclebattery's negative (-) terminal.
2. Remove the metal strap attached theback of the unit (if attached).
3. Press the release button to remove thefront panel.
4. Lift the top of the outer trim ring then pullit out to remove it.
5. Insert both of the supplied keys into theslots at the middle left and right sides of theunit then pull the unit out of the dashboard.
Removing the unit
If your vehicle is a Nissan, Toyota, followthis mounting instruction. Use the screwholes marked T (Toyota), N (Nissan)located on both sides of the unit to fastenthe unit to the factory radio mountingbrackets supplied with your vehicle.
Fasten the unit to the factory radiomounting brackets. Align the screw holeson the bracket with the screw holes on theunit, and then tighten the screws (5x5mm)on each side.
the outer trim ring, sleeve and themetal strap are not used for method Binstallation.
Note:
2. DIN REAR-MOUNT (Method B)Using The Detachable Front Panel
REMOVING THE FRONT PANEL
1 Press the release button on thefront panel.
.
2 Pull off the front panel. .
3 Store the front panel in the protectivecase provided for safekeeping.
.
TO ATTACH THE FRONT PANEL
To install the front panel, insert thepanel into the housing and make sure thepanel is properly installed. Otherwise,abnormality occurs on the display orsome keys will not function properly.
Rear Right + (Violet)Rear Right - (Violet/Black)Front Right + ( Grey)Front Right - (Grey/Black)Front Left + (White)Front Left - (White/Black)Rear Left + (Green)Rear Left - (Green/Black)
WHITE
WHITE / BLACK
GREEN
GREEN / BLACK
VIOLET
VIOLET / BLACK
GREY
GREY / BLACK
FRONT4 ohm
LEFTSPEAKER
REAR4 ohm
RIGHTSPEAKER
TO MEMORY B+
GROUND B-
ACC B+
BLUE
RED
YELLOW
FRONT4 ohm
REAR4 ohm
BLACKTO ANTENNA
Antenna Socket
RCA connector to rear right output (Red)
RCA connector to rear left output (White)
RCA connector to front right output (Red)
RCA connector to front left output (White)
Bluetooth Antenna
FUSE 15A
AUX IN
Push
SEL
TA AF
MENUBAND
PTY
MOD
MIC
0 1
SCN
2
RPT
3 4 5 6
CAR CD/MP3 PLAYER WITH ESP
SHF
7 8
DISP9
ENT
AMS - 10 + 10
Operations
Location and Function of Keys
Front panel:
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
Power on/off Button ( ), Mute Button
Volume Control,
Built-in Microphone for bluetooth function
TEL Menu Button (MENU)
LCD display
Mode / Button
Release ( ) Button
DOWN ( )/ Button
Tune down, Seek down, previous track,
fast reverse
UP ( ) /# Button
Tune up, Seek up, next track, fast forward
AMS( ) Button,
Numeric 0 Button, MP3 Search Button
BAND, ,ENTER Button
Playing/Pausing( ), Numeric 1 Button
Scan(SCN) Playback, Numeric 2 Button
Audio/Menu Selector (SEL)
Auto-storage/ Preset memory Scan
Repeat(RPT) Playback, Numeric 3 Button
Preset Station (1-6) Buttons
Random(SHF) Playback / Numeric 4 Button
Playing the -10 track / Numeric 5 Button
Playing the + 10 track / Numeric 6 Button
TA, Numeric 7 Button
AF/REG/ Numeric 8 Button
PTY Button
DISP(Display), Numeric 9 Button
AUX Input Jack
USB Port
SD/MMC Memory Card Slot
Disc slot
Eject ( ) key
Anti-theft LED Indicator
Reset Button
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
(25)
(26)
(27)
(28)
(29)
Descriptions of Function Controls
The front facet after removing the front panel:
12
7
11
1 2
34
5
6
8
9
10 13 14 15 1716
19 20
1821
26
25
24
23
22 27
28
26
29
Reset the unit
Power on/off
1.Turn off the unit power.2.Press the ( ) button and remove thefront panel, then press the buttonwith a ballpoint pen or similar object torestart the unit.
( ) on thehead unit or remote control
- Rotate the volume control to adjustvolume level.- Press the button short and repeatedlyto select the
volume, bass, treble,balance and fader.- Rotate the volume control to adjust level ofthe selected sound mode:
Press the button and hold for morethan 2 seconds to access system setupmenu mode, then
“INVOL 17”(Initial Volume) “ADJ 00:00”(adjust the clock) “BEEP ALL”(beep tone
RELRESET
SEL
Note:
SEL
In power off mode, switch on the unit bypressing any button except the ( )button. When the system is on, press andhold the on/off button
for about 2sceconds to turn off the unit.
REL
POWER
Sound adjustment
System menu
�
�
When operating the unit for the first time,after replacing the car battery or changingthe connections, you must reset the unit.
the sound setting that youwould like to adjust:
hen the unit has not beenadjusted for about 5 seconds, the currentsetting will be saved and it returns to theprevious mode.2. When using preset EQ modes, youcannot have access to Bass and Treblesettings.
press the buttonmomentarily to select the menu items insequence as follows:
After selecting the desired menu item,to select the mode
of the selected item.
“ ” will be visible on the LCDdisplay, r to adjustthe initial volume of this unit.
“ ” will be visible on the LCDdisplay,to adjust hour,
to adjust minute.
The car audio device is equipped with 3beep tone modes.
The beep sound is onwhen any key is pressed.
The beep sound will beheard when you hold down a button with adual function, which activates the secondfunction of this button.
The beep sound isdisabled.
This function allows you to define theminimum volume for the trafficannouncements. The adjustable range is0~45. The defaulted value is 17.
to adjust the volume of thetraffic announcements.
The car audio device is equipped with 4preset equalization modes.
to select one of the EQmodes with following sequence:DSP NONE (OFF)ROCK POP FLAT
�
�
� �
� �
� �
INITIAL VOLUME:INVOL 17
CLOCK ADJUST:ADJ 00.00
BEEP TONE MODE:
- Beep ALL mode:
- Beep 2nd mode:
- Beep off mode:
Traffic announcement volume:
EON ON/OFF:
DSP EFFECT:
to choose EONON or EON OFF.
r
rr
one ofthe beep tone modes.
otate the volume control
otate the volume control
otate the volume control clockwiseotate the volume control
counter-clockwise
Rotate the volume control to select
Rotate thevolume control
Rotate the volume control
Rotate thevolume control
Rotate the volume control
CLAS(classical).
LOUD ON/OFF:to choose
loudness on or off.
General Operations
LOCAL RECEPTION ON/OFF:
ALARM ON/OFF
MUTE
DISP
- :
to switch localreception ON or OFF mode.
tochoose stereo or mono audio effect.
is
R
Rotate the volume control
In power on mode, briefly press thebutton ( ) to toggle mute on or off.
-During disc, USB, SD/MMC card playback,if you switch to other mode, and then returnthe previous mode again, the unit willresume playing from the point that it wasinterrupted.
Press the button repeatedly to displayas follows:
In radio mode: CT -> PTY(Type ofprogram) -> PS(Name of the station) ->FREQUENCY ->
In CDP/USB/SD/MMC mode: CT->PTY(Type of program) -> FREQUENCY -
Mute on/off
INFORMATION DISPLAY
In urban areas, most stations are strongenough and “LOCAL ON” mode should beselected. Switch to LOCAL OFF mode tosearch for stations with weaker signals.
When receiving an RDS station
Rotate the volume control
otate the volume control
STEREO/MONO
,MODE
MODE
:
FM station is received in stereo mode.However, if the signal weak or receptionis not as good as you would like, switchingto MONO mode usually improves the overallsound quality.
Themuted state will be also released when theVolume control button is used.
In power on mode, press the buttonrepeatedly to select the different modes asthe following sequence: TUNER, DISC (witha CD/MP3/WMA disc inside the disc slot) ,USB(with USB device inserted) , SD/MMC(with SD/MMC card inserted), AUX INmode.
- During disc, USB, SD/MMC card playback,if you turn off the unit and then switch on it,the unit will resume playing from the pointthat it was interrupted.
To select playback mode
Last position memory feature
to chooseALARM ON or EALARM OFF.
>PS(Name of the station) -> Track number/Running time or other information ->* CT or PTYinformation, the display shows “
” or “PTY NONE”.
In radio mode:CT->PTY NONE-> PSNONE ->FREQUENCY ->
In CDP/USB/SD mode: CT -> PTY NONE-> FREQUENCY -> PS NONE -> Tracknumber /Running time or other information
The selected information is displayed for5 seconds, then the radio goes back to thefirst display mode after 5 seconds.
- receiving a non RDS station:
ESP Function
If the unit does not receiveNO
CLOCKWhen
This CD/MP3 car radio has the electronicshockproof feature.So that if the unit skips due to rough roadconditions, the playback of the disc will beuninterrupted.
Designed as a theft deterrent, the red LEDwill flash when the unit is turned offand face plate removed.
Anti-theft LED Indicator
Short pressing the button, it scanseach preset stations in the memories of thecurrent band. Each preset station will blinkfor 5 seconds with releasing mute, then goto next station, finally the radio will go toplay the start preset station. Press theagain to stop preset scanning.
Pressing the button for more than 2seconds, it will enter auto store mode.The whole band is scanned and the sixstrongest stations are stored into the presetmemories, after scanning is finished.
Press the button short toggles AFmode on or off. There are 3 state the “AF”icon on the LCD display:
AF switching mode off.AF switching mode on,and
has RDS information.AF switching mode on, but
RDS information is not received yet.
When AF switching mode is selected, theradio checks the signal strength of the AFall the time. The interval of checking time ofeach AFs depends on the signal strength ofcurrent station, from a few minute for strongstation to few seconds for weak station.Every time that new AF is stronger thancurrent station, it switches over to thatfrequency for very short time. Because themute time of AF switching or checking timeis very short, it is almost inaudible in case ofnormal program. During FM mode, when AFis on, manual store, Auto store/preset scanfunction can only receive and save RDSprogram.
Press the button for longer 2seconds to toggle on or off region mode .Some broadcasting stations change theirprogram from normal broadcasting toregional broadcasting for a certain timeperiod.
thecurrent listening program remainsunchanged
it allows thereception moved to the regional station
AMS
AMS
- Auto store:AMS
AF/REG
Icon “AF” off:Icon “AF” on:
Icon “AF” blink:
AF/REG
Setting Alternative Frequencies
Regional Program Operation
RDS (Radio Data System) Operations
When regional mode on, the radio acceptsRDS stations with regional variants,
; When regional mode off, theradio ignores regional variants,
.
To select a radio band
Auto/ Manual tuning
BAND
- Automatic search mode:
- Manual search mode:
In tuner mode, Press the buttonrepeatedly to select a radio broadcastingband you would like to hear. The FM band istoggled cyclically through thetuning bands: ->FM 1-> FM 2 -> FM 3 -> .
Briefly press the or button, the autosearch will start. It will search upward ordownward for the strong signal radio stationwithin the current band. In auto tuning,press the or button to stop tuning.Pressing and holding the or button forabout 2 seconds until “MANUAL” appearson LCD display, it will change into manualsearch mode.
Press the or button short andrepeatedly to manually search upward ordownward step by step for the desired radiostation within the current band.In manual search process, if the bothbuttons haven’t been pressed within 5seconds, it will change into automaticsearch mode automatically, “AUTO” will bevisible on the LCD display.
or
� �
� �
� �
� �
� �
To store / recall a preset radio stations
Auto store / Preset scan
You can store up to a total of 18 FM radiostations in the memory, manually orautomatically.
- Select a band (if needed)- Select a station by buttons- Press and hold a preset button ( - )
which you want to store the station for atleast 2 seconds, the current station willbe saved into the relevant preset memorybank. When a RDS station is beingstored, the relevant PI, PS, AF list arestored.
- Select a band (if needed).- Press a preset button (1-6) briefly to
recall the stored station. In case of RDSmode, the strongest AF is selected afterAF searching.
- To store a station:
1 6
- To recall a station:
- Preset scan:
Radio Operations
Pressing and holding the button formore than 2 seconds to enter the PTYmenu. The default type is NEWS.Rotate the voluem control to select differentPTY as follows:
NEWS -> AFFAIRS -> INFO -> SPORT->EDUCATE -> DRAMA -> CULTURE ->SCIENCE -> VARIED -> POP M -> ROCK M-> EASY M -> LIGHT M -> CLASSICS ->OTHER M -> WEATHER -> FINANCE-> CHILDREN -> SOCIAL -> RELIGION-> PHONE IN -> TRAVEL -> LEISURE ->JAZZ -> COUNTRY -> NATION M ->OLDIES -> FOLK M -> DOCUMENT ->TEST -> ALARM -> NEWS
If no button is pressed for 5 seconds, itreturns to normal state.
Press the button briefly to toggle thePTY search on or off. When PTY searchmode is on, and the or button ispressed, PTY search will be started. PTYsearch stops when it finds the station thathas the selected program type, otherwise,the “NOT FND” will be visible onthe LCD display. During the PTY searchprocess, press any key to stop the PTYsearch.
Using PTY select functionPTY
PTY
� �
Using PTY Search Function
Using the Traffic AnnouncementPress the button to toggles mode onor off. Deafault is off.
- When TA mode is on, but no trafficannouncement is transmitted, only TP iconblinks.
- When TA mode is on and TP signal isavailable from the current station, TP iconstops blinking and is turned on.
- When TA RDS signal is available from thecurrent station, TA icon is turned on.
- When TA mode is on and a trafficannouncement is transmitted:a. The volume set will be set to TA volume.b. It is possible to interrupt disc (CD/ MP3 /
WMA), USB/IPOD/SD/MMC, AUX IN ormode, it will
switch temporarily to radio mode.c. Text “Traffic” appears on the LCD
TA TA
(not found)
the current radio station
display.d. Return to original setting after the traffic
announcement has been finished.e. When you insert a new media
(DISC/SD/MMC/USB), TP mode will beforced to turn off automatically, and themode will be changed.
f. When you press the button, TPmode will be forced to turn offautomatically, and the mode will bechanged.
The current traffic announcement iscancelled by pressing this key. But themode will not be off.
MODE
TA
TA interruption function
Note:1. If TA is on, auto tuning function stops atthe station where TA signal is available.2. If PTY search is on, auto tuning functionacts as same as PTY Search.3. If AF is on, auto tuning function stops atthe RDS station.4. If PTY, AF and TP is on, PTY search willbe done, and next TP search, and finally AFsearch.
CD/MP3/WMA DISC OPERATIONS
Switching to CD/MP3 mode
Loading/Removing a Disc
1. If there is no CD/MP3 disc inserted in theplayer:Gently insert a CD/MP3 disc with theprinted side facing up into the disc slot untilyou feel some resistance. The disc is drawinto the driver automatically. The CD/MP3playback begins.2. If a CD/MP3 disc is already inserted inthe player, press button to switch tothe CD/MP3 mode.
1. Insert a disc into the disc slot with theprinted side facing upward, the player willplay the disc automatically.2.To eject the disc, press the ( )button.
MODE
EJECT
Playing/Pausing
Playing the previous/ next track
Playing forward and backward
Playing the 10 track up or down
Introduction playback
In media (CD/MP3/WMA /USB/SD/ MMC orA2DP) playback mode, press the buttonto interrupt the play back.Press again to resume the playback.
- In media (CD/MP3/WMA /USB/SD/ MMCor A2DP) playback mode, briefly press the
button to play the next track.
-, briefly press the
button to play the previous track.
ress the button to play the current trackfrom the beginning
.
In CD or MP3/WMA file playback process,press and hold the button to fastforward or fast reverse. Release thebuttons when the desired location is found,and normal play starts.
In CD or MP3/WMA file playback process,press the , button to play theprevious or next 10 track or file.
You can play the beginning of each track orfile for 10 seconds on the current disc in
5 (-10) 6 (+10)
�
�
�
� �
When played time of the current track orfile is less than 2 seconds
- When played time is more than 2 seconds,p
of the current track orfile
or
back
sequence.In CD or MP3/WMA file playback, brieflypress the button to play the first 10seconds segment of each one of currentdisc. Press again to stop scanning and playthe currently selected track or file.
In CD or MP3/WMA file playback, brieflypress the button to
Press again to stop repeatplayback and resume normal playback.
In CD or MP3/WMA file playback, brieflypress the button to
You can access 3 different types of tracksearch modes for MP3/WMA format:
File number search File namesearch Folder search Exit
a) In playback of files with MP3 or WMAformat, press the button once toaccess the file number search mode whichallow you to quickly find a specific MP3/WMA title by its serial number, and the
“00 ”
You can select a file directly, afterentering file number search mode.Rotate the volume control to select thenumber of your favorite file with high speed.Finally press button toconfirm and play the selected file.
SCN
RPT
SHF
File number search mode:
AMS
BAND (ENTER)
The file name search mode:
Repeat playback
Random playback
Select the track or file for playback inMP3 or WMA format
*-----
*******
continuously playthe current track.
play all tracks orfiles of the disc in random sequence. Pressagain to cancel random playing.
will be shown on the LCD display.
b)
This file name search function requires onlythree character as search keyword, it willallow you to quickly find an MP3 title by itsname.a) To access this feature, press the
button twice, the “A ” will be shown
on the LCD display and the first character(“A”) will be blinking.
b)Then change the blinking character byrotating the volume control. The characterwill be changed from “A” through “Z” and “0”through “9” in the order of A~Z and 0~9.
AMS
Press the button to confirm thecharacter entered and advance to the nextcharacter.
c) When mached files was found, rotate thevolume control or press the / button tochange and select your desired file amongthese files with same search keyword, thenpress the (ENTER) button to startplay the searched file.If the file was not found, “NO MATCH”message will be visible on the display.
The folder search mode will allow you toquickly find an MP3 title under a specificgroup folder.a) In playback of file with MP3 or WMAformat, press the button three times toaccess the first folder mode.
b) Rotate the volume control or press the/ button to change and select yourdesired folder (If there are no root Folder inthe disc, the LCD will display “ROOT/”)
c) Once the folder has been selected, pressthe button to start play, thefirst the track or file of the selected folderwill be played.
In thefolder name, file name,
information will be scrolling on theLCD display automatically.
As long as the current playing MP3 musiccontains relevant ID3 tag information inversion 1.0/2.0 format, the 3 itemsunderlined above will be scrolling on theLCD display, otherwise, they will notappear.
SEL
BAND
Folder search mode:
AMS
BAND(ENTER)
Note:
� �
�
�
ID3 information of MP3 file
title, artist andalbum
playback of discs with MP3 format,
If available, the unit can play the mixed-
mode CD disc (the disc contains both CD
audio tracks and MP3/WMA files).
Under a default mode, the unit will first
play all the MP3/WMA formatted songs and
than play the CD formatted songs.
Mixed-Mode CD Operations
The unit is equipped with a USB port on thefront panel of the unit, you can connect aUSB stick through the USB port.
When you insert a USB stick through theport, the unit will search the MP3 files andstart to play it automatically.If insert a disc into the disc slot while readthe file in the USB device, the unit willplaying the disc first. If you want to play thefile in the USB device, press thebutton to switch to USB mode.
- Use the USB adaptor cable, if necessary.- The operations of playing MP3/WMA filesin the USB is the same as the MP3/WMAoperation described in the CD/MP3/WMAdisc operations.- When reading the USB stick, please don'ttouch or remove it.- If following the instruction above, the unitcan't read the file in the USB stick, pleasecheck if the device is in good condition, ortake it out then insert it into the USB portonce more.- The main unit can only support thestandard USB-memory device.- USB MP3 player is not a standard whichmeans different brand name or differentmodels have their own standard.So this product cannot support all MP3players.- When connecting an MP3 player and thereis a normal battery in the player (nonrechargeable battery), you should removethe battery from the MP3 player and thenconnect it to the USB port. Otherwise, itmay cause battery burst.- When reading a USB device, be sure notto remove it from the USB port (changemode beforehand).
Using the USB stick:
MODE
Note:
USB Playing Operations
This unit equipped with you a memory cardslot.
When you insert a SD/MMC card into thememory card slot, the player will readingthe SD/MMC card automatically.If insert a disc into the disc slot while readthe SD/MMC card, the unit will playing thedisc. If you want to play the file in theSD/MMC card, press the button toswitch to SD/MMC mode.SD/MMC memory card playing operation isthe same with the MP3 operation described.
- When reading the memory card, pleasedon't touch or take out the card.- If following the instruction above, the unitcan't read the card, please check if the cardis in good condition, or take out the card andthen insert it into the card slot once more.
Using the SD/MMC card:
MODE
Note:
SD/MMC Card Operations
Aux In Operations
This car radio has an external auxiliaryinput jack, it is compatible with audio outputfrom an MP3 music player.So you can listen to sounds and music fromexternal devices, if you have plugged sucha player into the AUX IN jack. Press the
button to switch to the mode onor off.MODE AUX
When link up your mobile phone to thisbluetooth hands-free system, you can dialor receive calls via this bluetooth deviceduring driving.You can also transmit the audio data(music)from a mobile phone to the CD/MP3 tunervia this bluetooth device.Sound and picture will be automatically offwhen there is an in-coming call. Voicecomes out from your car speakers and thebuilt-in mircophone receives your voice.
.
During pairing, please activate yourmobile phone and input pairing code “ ”and confirm in your mobile phone.
If pairing succeed, the “ ” will notflashing on the LCD display. Otherwise, the“ ” will flashing continuously on the LCDdisplay.
NOTE:After pairing succeed, the auto-connectfunction needs mobile phone supporting. Ifyour mobile phone don’t support thisfunction, please use manual-connectfunction to connect your mobile phone andbluetooth.
ConnectThe bluetooth module of this car radio willconnect to mobile phone automatically afterpairing succeed. If connection succeed,“CONNECT” will be visible on the LCDdisplay, and the “ ” will not flashing on theLCD display. Otherwise, the “ ” twinklecontinuously on the LCD display.
DisconnectIf bluetooth module has connected withyour mobile phone, turn off the unit bypressing and hold the button candisconnect with the bluetooth.
You have to active automatic callreception so that the mobile phoneaccepts incoming calls automatically
In many countries, this is a prerequisitefor legal operation of hands-freeequipment while driving.
1. Pairing1.1
0000
1.2
2. Connect/disconnect2.1
2.2
POWER
(See the menu of the hands-free system)
Bluetooth hands-free Function
3. DIAL CALL3.1
3.2 0 93.2.1 MENU
3.2.2 0 9
3.2.3
3.33.3.1
4. Accept / Reject / End call4.1
4.2
4.3
5. Call Transfer
6. Caller ID
7. Bluetooth menu wizardMENU
MENU
PRE NUM :
RECEIVED:
Dial with the mobile phone directly.
Dial with the ~ numeric button.In connect status, press the
button to activate the bluetooth mode,Press the “ ~ ” button to input
telephone number. Simultaneously, theinput number will be appeared on the LCDdisplay.If a number is wrongly input, press and holdthe button to delete the incorrect number.
press the “ ” button to executedialing.
Dial the last numberIn connect status, press and hold the
“ ” button to execute redialing.
Accept callWhen a ring comes, press the “ ” buttonto accept call.
Reject callWhen a ring comes, press the “ ” buttonto reject the coming call.
End callWhen you are talking, press the “ ” buttonto hang up the current call.
During talking status, you can transfertalking to private listening on your phonefrom your car audio by pressing and holdingthe “ ” button; press and hold the “ ”button again to get back to car audio.
When a ring comes, the numbers will beshown on the screen , you can decidewhether or not to answer to, so you avoidunnecessary trouble and disturb.
In connect status, press and hold thebutton to access bluetooth menu, thenpress the button repeatedly to viewbluetooth menu. The structure of thebluetooth menu as follows:
Preset phone number list.you can save 10 phone numbers total.
List of latest 10 received phonenumbers.
�
DIALED:
MISSED:
AUTO ANS(MANU ANS):
MENUSEL ENTER)
a) Select preset number list:
b) Edit preset number list:SEL
0 9
SEL
0 9 # *
SEL
c) Dial phone number of menu list:
VOL+ VOL -
d) Switch auto or manual answer
8. A2DP FunctionA2DP
8.1
MODE
List of latest 10 outgoing phonenumbers.
List of the latest 10 missed phonenumbers.
Switch autoanswer or manual answer.
Press the button to select the item.Press the ( to enter the currentmenu item. Press the “ ” button again toexit bluetooth menu.
You can select the next or previous phonenumber that saved in the preset number listby rotating the volume control.
- Press the to enter preset number list.You can see NONE( - ) on the LCD display,if you haven’t stored any phone number.- Then press button to enter editingstatus.- Press the ~ , or to edit phone number,Simultaneously, the inputted number will beappeared on the LCD display. If a number iswrongly input, press and hold the buttonto delete the incorrect number.- After the entire phone number has beeninput, press the button to save thephone number. Press the “ ” button to exitfrom phone editing status.
During browse the preset number list orreceived list or dialed list or missed list bypressing press the or button,you can dial any phone number on the listsby pressing “ ” button.
Select auto answer or manual answer thecoming phone by rotating the encoder afterenter this preset item.
If your mobile phone support function( Advance Audio Distribution Profile) that itis special designed for transmitting stereomusic to bluetooth device. You can listen tothe music stored in your mobile phone bythis car audio.
A2DP function is activatedautomatically when user activate it atmobile phone. Press the button toswitch to A2DP (BT AUDIO) mode fromother source.
�
14
8.2
Note:
When playing A2DP, user can controlplayback by using the relevant functioncontrol. Eg.:- Play/pause by pressing button.- Previous/next track by pressing /
button.
While playing A2DP, if you execute outgoingcall or incoming call, the A2DP function willbe canclled automatically , and you need tore-activate after phone call.
� �
WARNING:
1. To get the best conversation quality, it isrecommended that the distance betweenthe mobile phone and the unit is within 3m.Please don’t put any metal object or anyother obstacle between the path of themobile phone and the unit.
2. Phones supported may have someincompatibility issues depending on thetype & model. Due to numerousmanufacturers and models of mobilehandsets and the continual emergence ofnew mobile phones we are unable to offeran exhaustive list of bluetooth compatiblephones.
1. GENERAL
2. CD PLAYER
3. RADIOFM
Power Supply RequirementsDC 12 Volts, Negative Ground
Chassis Dimensions178(W)x160(D)x 50(H) mm
Tone Controls- Bass (at 100 Hz) ±10 dB- Treble (at 10 kHz) ±10 dB
Maximum Output Power4x75 watts
Current Drain15 Ampere (max.)
Signal to Noise Ratio> 55 dB
Channel Separation> 40 dB
Frequency Response20Hz - 20 KHz
Frequency Coverage87.5 - 108 0 Mhz
IF10.7 MHz
Sensitivity (S/N=30dB)4µV
.
Discs/files playedCD-DA,CD-R/RW/MP3/WMA
Signal to Noise Ratio55dB(mono)
Stereo Separation30 dB (65dBu, 1KHz)
Specifications
15
- Do not warp discs.- A disc should always be kept in its casewhen not in use to prevent from damage.- Do not place discs in the following places:
1. Direct sunlight.2. Dirty, dusty and damp areas.3. Near car heaters.4. On the seats or dashboard.
Use a dry soft cloth to wipe the surface. Ifthe disc is quite dirty, Use a soft clothslightly moistures with isopropyl (rubbing)alcohol. Never use solvents such asbenzene, thinner or conventional recordcleaners as they may the surfaceof the disc.
A disc may become somewhat scratched(although not enough to make it unusable)depending on the way it is handled andconditions in the usage environment. Notethese scratches are not an indication of anyproblem with the player.
Disc Cleaning
Note:
damage
2. The unit cannot play a CD-R and CD-RWthat is not finalized. (Please refer to themanual of your CD-R/CD-RW recorder orCD-R/CD-RW software for moreinformation on finalization process).3. Depending on the recording status,conditions of the disc and the equipmentused for the recording, some CD-Rs/CD-RWs may not be played on this unit (see *1).
*1: To have more reliable play back,please see following recommendations:
a. Use CD-RWs with speed 1x to 4x andwrite with speed 1x to 2x.
b. Use CD-Rs with speed 1x to 8x andwrite with speed 1x to 2x.
c. Do not play a CD-RW which has beenwritten more than 5 times.
d. The car radio supports discs whichcomply with the ISO 9660 level 1 or level 2format, or the Joliet or Romeo format.
1. When naming a MP3 file, be sure the filename extension is 'MP3'.2. For a non-MP3 file, even though the filename extension is 'MP3', the unit cannotrecognize it.
-.
- Do not place stickers or make scratcheson discs.
C. Notes on MP3 files
D. Handling and CleaningDirty, dusty, scratched and warped discs
will cause malfunctions
A. Notes on discs:
B. Notes on CD-Rs (recordable CDs)/CD-RWs (rewritable CDs):
1. Attempting to use non-standard shapediscs (e.g. square, start, and heart) maydamage the unit. Be sure to use roundshape CD discs only for this unit.2. Do not stick paper or tape, etc, onto thelabel side or the recording side of any discs,as it may cause a malfunction.
1. Be sure to use discs with following marksonly for the unit to play:
Dirty, dusty, scratched and warped discswill cause a malfunction.
Disc Notes
E Precautions when using new discs.
A new disc may have irregularities. It willsometimes be necessary to remove theserough edges in advance by using a ballpointpen or pencil as shown in the illustration.
16
Trouble Shooting
Symptom Cause Solution
No power
The car ignition switch havenot turn on.
If the power supply is connected tothe car accessory circuits, but theengine is not moving, switch theignition key to “ACC”.
The fuse has been blown. Replace a new one.
Presence of CD disc insidethe player.
Remove the disc from the player,and insert a new one.
Disc can not be loadedor ejected.
Inserting the disc in reversedirection.
Insert the CD with the lab l facingupward.
e
The surface of CD is extremelydirty or has been scraped.
Clean the disc or try to replacea new one.
Temperature inside the caris too high.
Cool off or until the ambienttemperature return to normal.
Condensation Leave the player off for an hour or so,and then try again.
No soundVolume is in minimum. Adjust volume to a desired level.
The wiring is not properly
connected.Check wiring connection.
Sound skips
The installation angle ismore than 30 .
0
Adjust the installation angle
less than 300.
The surface of CD is extremelydirty or has been scraped.
Clean the disc or try to replacea new one.
The operation keysdo not work
1. The built-in microcomputeris not operating properly due to noise.
2. The front panel has notproperly installed.
1. Press the RESET buttonto restore the program.
2. Fixed the front panel intoits place.
No radio reception. The antenna cable is not connected.Insert the antenna cable firmly intothe antenna socket of this CD player.
In automatic search modethe radio does not stop ata transmitting station.
The transmission signals aretoo weak.
Select a radio station manually.
The following chart will help in solving most problems that may occur. If you still have questionsafter going through the checklist, please consult your local customer service representative.Before going through this check list, refer the wiring and operating procedures.
