Procedia Engineering 130 ( 2015 ) 453 – 465

Available online at www.sciencedirect.com

1877-7058 © 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).Peer-review under responsibility of the organizing committee of ICPVT-14doi: 10.1016/j.proeng.2015.12.239

ScienceDirect

aUniversity of Strathclyde, 75 Montrose Street, Glasgow G1 1XJ, UK

Keywords:

E-mail address:

© 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).Peer-review under responsibility of the organizing committee of ICPVT-14

CORE Metadata, citation and similar papers at core.ac.uk

Provided by Elsevier - Publisher Connector

https://core.ac.uk/display/82593958?utm_source=pdf&utm_medium=banner&utm_campaign=pdf-decoration-v1http://crossmark.crossref.org/dialog/?doi=10.1016/j.proeng.2015.12.239&domain=pdfhttp://crossmark.crossref.org/dialog/?doi=10.1016/j.proeng.2015.12.239&domain=pdf

454 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465

1.1. Weld clad simulation review

455 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465

456 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465

457 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465

458 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465

pY.P.

babp PYPY

Y.P. a bpburst

ult. K

Kp eultburst

ra

bap ePYru a

RG.M.

RRR MG

R1 R2Rp

PA

mK

mKP eyy

A

K=R2/R1 m=Rp/R1

459 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465

460 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465

461 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465

7.1. Material hardening

462 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465

7.2. Assuming an idealised interface

463 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465

464 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465

465 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465