of 26
8/9/2019 AutoLine Industries Ltd.
1/25
1 | P a g e
Project report
On
Chakan, unit-I
pune- 411020036
Submitted byPiyush Gundecha
Iccs (2009-10)
s.y.b.b.a (Roll No. 54)
ACKNOWLEDGMENT
8/9/2019 AutoLine Industries Ltd.
2/25
2 | P a g e
Every work done needs to be followed by a deep sense of gratitude to those who made it
through to success. I take this opportunity to thank all those who rendered their immense help &
guidance for the completion of this report.
Firstly, I would like to express my gratitude to Mr. B.P.Shiv Director (Business
Development) of Auotline Industries Ltd, for his kind help and support by providing me with the
necessary insights and information by taking a session after the visit.
Secondly, I would like to express my sincere gratitude to my project guide Mr. Amol
Shinde for his valuable guidance & support given to me endlessly from time to time.
Finally, I would like to thank my friends for their cooperation and advice during the task
of preparing this report .
Piyush Gundecha
INDEX
8/9/2019 AutoLine Industries Ltd.
3/25
3 | P a g e
INTRODUCTION
SR.NO TOPIC PAGE NO.
1. Introduction 4
2. Industry Profile 5-7
3. Company Profile 8-12
4. Product Profile 13-15
5. Management Structure 16-17
6. Objective of the Project 18
7. Manufacturing & Operation Details 19-20
8. Suppliers & Customers 21-22
9. Findings & Observations 23
10. Suggestions 24
11. Bibliography 25
8/9/2019 AutoLine Industries Ltd.
4/25
4 | P a g e
Autoline Industries Ltd(AIL), is one of the auto-component manufacturers located
in Pune catering to the components & subassemblies requirements of leading automobile
companies. Autoline Industries Ltd (AIL) (incorporated on December 16, 1996, as Autoline
Stampings Private Ltd.) was initially set up in January 1995 as a partnership firm known as
"Autoline Pressings" under Indian Partnership Act 1932. They are engaged in Manufacturing
various auto parts / sheet metal components for Passenger cars, Sports Utility Vehicles (SUV),
Commercial vehicles, Two wheelers, Three wheelers, Tractors, etc. They are one of the prime
vendors to various Automobile Companies like, TATA MOTORS LTD. (earlier TELCO),
BAJAJ AUTO LTD, KINETIC ENGINEERING LTD, MAHINDRA & MAHINDRA LTD.,
FIAT (INDIA) PVT. LTD., WALKER EXHAUST (INDIA) PVT LTD (a Subsidiary of
Tenneco, a fortune 500 U.S. company), etc. AIL is also exporting auto parts i.e. brake shoes for
Mercedes Benz Trailers to Saudi Arabia, Dubai etc. Autoline has grown by leaps and bounds
from a single plant, a modest capital and a small staff to a company that can boast of 5
manufacturing units, over 1500 strong human resource and an almost 100 percent growth each
year for seven years. Today, more than 400 products from Autoline fit into a range of SUVs,
LCVs , HCVs and passenger cars besides 2 and 3 wheelers.
INDUSTRY PROFILE
8/9/2019 AutoLine Industries Ltd.
5/25
5 | P a g e
The auto-component industry is an important segment of the economy in any country
as it links many industries and services. The Automotive Component Manufacturers Association
of India (ACMA) is the nodal agency for the Indian Auto Component Industry, which includes
Autoline Industries Ltd.The Indian auto component industry is one of India's sunrise industries
with tremendous growth prospects. India is now a supplier of a range of high-value and critical
automobile components to global auto makers such as General Motors, Toyota, Ford and
Volkswagen, amongst others. Some leading manufacturers of auto components in India include
Motor Industries Company of India, Bharat Forge, Sundaram Fasteners, Wheels India, Amtek
Auto, Motherson Sumi, Rico Auto and Subros. There are presently 29 Vehicles Manufacturers
(OEMs) in India located at Gurgaon, Pune and Chennai who together manufactured more than
5.2 million vehicles during 2005-06.
The regional base of auto component manufacturers is mostly concentrated in the West,
North and South of India. This regional concentration of auto component manufacturers has been
dictated by the emergence of automobile manufacturers in these regions. The set up of Tata
Motors, Bajaj, Mahindra & Mahindra and TVS in the 1950s and 1960s laid the foundation for
auto component manufacturers in the West and South, whilst the entry of Maruti during the
1980s created the base in the North.
The turnover of the auto component industry was estimated at overUS$ 18 billion in
2007-08, a compunded increase of 27.2 per cent since 2002. It is likely to touch US$ 40 billion
by 2015-16
8/9/2019 AutoLine Industries Ltd.
6/25
6 | P a g e
The six broad product categories according to Automotive Components Manufacturers
Association (ACMA) are:
1. Engine Parts
2. Electrical Parts
3. Drive Transmission & Steering Parts
4. Suspension & Braking Parts
5. Equipments
6. Others
1. COMPONENT PRODUCTION (IN US $ MLN.)
8/9/2019 AutoLine Industries Ltd.
7/25
7 | P a g e
2. COMPONENT EXPORT (IN US $ MLN.)
COMPANY PROFILE
8/9/2019 AutoLine Industries Ltd.
8/25
8 | P a g e
Incorporated as Autoline Stampings Private Limited on 16th December 1996. We
changed the name to Autoline Industries Private Limited on January 10, 2006 and converted into
a public limited company on January 13, 2006 and name changed to Autoline Industries
Limited.
NAME AUTOLINE INDUSTRIES LTD
REGISTERED
OFFICE
T-135, MIDC, Bhosari, Pune 411026,
Maharashtra
Telephone +91-20-27128961
Fax +91-20-27110540
Registration No 11-104510
ROC Registrar of Companies, Maharashtra, Pune
Address PMT Commercial Building, 3rd Floor, Deccan
Gymkhana, Pune - 411004
Companys Vision: To be an innovation driven, Global Leader in the Design, Engineering and
Manufacturing of Automotive Mechanical Systems.
Companys Mission: To migrate into the fast lane without speed limits.
Quality Policy: "We, at Autoline Dimensions, are committed to constantly strive for customer
satisfaction, by consistently exceeding customer's expectations for product/Service quality with
the help of continual improvements in our processes."
8/9/2019 AutoLine Industries Ltd.
9/25
9 | P a g e
BACKGROUND
Autoline Industriesis an auto-component manufacturer located in Pune catering to the
components and subassembly requirements of leading automobile manufacturers. Three of our
promoters Mr. Shivaji Akhade, Mr. Sudhir Mungase, and Mrs. Rema Radhakrishnan promoted a
partnership firm in the name of Autoline Pressings in 1995. They started contract manufacturing
of sheet metal components in January 1995 from a 3000 sq.ft rented premises at Survey No.825
Kudalwadi, near MIDC, Chinchwad Area, Pune. Subsequently, a Company in the name and style
of Autoline Stampings Private Limited was incorporated on December 16, 1996. This company
took over the partnership business. Autoline Stampings Pvt.Ltd was converted to a public limited
company and renamed Autoline Industries Limited w.e.f. January 13, 2006. Another factory was
setup in 1997-98 at Chakan, Pune with a built up area of 104,000 sq. ft. on a plot of land
measuring 114,000 sq. ft. This factory is presently the largest manufacturing facility. They set up
the 3rd manufacturing unit at MIDC, Bhosari in 1999-2000 on a 54,000 sq. ft. plot of land
located near Tata Motors. All the three factories have obtained ISO/TS 16949: 2002 quality
certifications. In November 2005 the company acquired Western Pressing Private Limited, with
facilities for manufacturing Silencers and Exhaust Systems.
CURRENT OPERATIONS
Autoline Industries is one of the very few companies in India, which have capability to
go from complete Design to manufacture (or Art to Part) in very short time. Company has a
strong team of 300 designers and engineers and prosperity softwares( Morpher 4.0) which
8/9/2019 AutoLine Industries Ltd.
10/25
10 | P a g e
provides the company capability to to lower the new product designing process by 80-90%.
Inorganic expansion has led to company having strong presence across 3 key markets of western
Europe(Zagato, Italy), South Asia(India, Dimensions Engineering, Pune ) and US( Detroit
Engineering Products, US). Besides company has 5 manufacturing mainly in
Pune(Chakan) and Uttaranchal( Haridwar).
COMPETITIVE STRENGTHS
1. Integrated design engineering, prototyping, tooling and massmanufacturing capabilities.
8/9/2019 AutoLine Industries Ltd.
11/25
11 | P a g e
2. Strength to proactively seek opportunities for offering customized productsfor manufacturers in niche sectors.
3. One of the top five prime vendors of auto components with capability toprovide high quality products in large volumes at competitive costs.
4. Ranked No.1 in terms of adherence to quality standards5. Competent Management Team6. Single Source Supplier: The single source supplier of more than 100
components for the Tata Indica, Indigo & Marino Cars. They are also the
single source supplier for load bodies for the Tata Mini 1-Ton truck Ace.
CAPITAL STRUCTURE
AGGREGATE AMOUNT AT
NOMINAL VALUE
AGGREGATE AMOUNT
AT ISSUE PRICE
8/9/2019 AutoLine Industries Ltd.
12/25
12 | P a g e
PRODUCT PROFILE
Autoline Industries Ltd., is a major supplier of sheet metal components, sub assemblies
and assemblies. Also manufacturing "A" class sheet metal dies, we supply about 130
components to Tata Motor's prestigious INDICA, Car Project and its mid-sized sedan INDIGO
A) Authorized Capital15,000,000 equity shares of 10
Each 150.00 150.00
B) Issued, Subscribed andPaid up Equity Share
Capital70,33,511 equity shares of Rs. 10
each
70.33 139.74
C) Present Issue to the
public in terms of this
Red Herring Prospectus
[*] Equity Shares of Rs. 10 eachfully paid up
[*] (*)
D) Paid Up Equity Capital
After the Issue[*] Equity Shares of Rs. 10 eachfully paid up
[*] [*]
E) Share Premium accountBefore the issueAfter the issue 69.41
[*]69.41
[*]
8/9/2019 AutoLine Industries Ltd.
13/25
13 | P a g e
& MARINA mostly as single source supplier, and about 400 components to its Auto Division for
LCVs, MCVs and HCVs, besides components for SUVs like Safari, Sumo and their variants.
Various other components numbering more than 150 are being supplied to Bajaj Auto Limited
& Kinetic Engineering Limited for 2 wheelers & 3 wheelers. Critical and prestigious
components are regularly supplied to Walker Exhaust (India) Pvt Ltd, a wholly owned
subsidiary of a Fortune 500 company. Besides these, we also supply Tractor components to
Mahindra & Mahindra Limited, Mumbai, and Fiat, Mumbai, for their prestigious Palio
Project. Exports of Brake shoes meant as spares for Mercedes Trailers to Germany, Singapore,
UAE, Saudi Arabia, etc. A joint venture by the name of Union Autoline Spare Parts LLC,
UAE has been set up to promote exports of Auto Components for the Gulf and African Markets.
PRODUCTS
1. Assembly Panel Inn Front Door RH & LH2. Assembly Panel Inn Rear Door RH & LH3. Panel Inn. Engine Hood RH & LH4. Panel Tunnel5. Panel Wind Shield Outer6. Panel Engine Hood Top7. Assembly Rear Quarter Inn. RH & AH
8/9/2019 AutoLine Industries Ltd.
14/25
14 | P a g e
8. Panel Tail Gate Sill Inner9. Cross Member Front Bump Mounting Rear10.Side Sill Reinforcement Front LH11.Reinforcement Waist Outer Front Door12.Reinforcement Waist Inner Front Door13.Safari Door Hinge14.Reinforcement Hand Brake15.Tail Lamp Cover16.D Pillar Top17.Side Sill Reinforcement Rear LH18.Panel Sill Truck Lid Outer19.Frame Front Floor20.Member Parcel Shelf Supp Side21.Suspension Tower22.Assembly Foot Control Modules23.Exhaust Systems24.Switch Gears25.Assembly Cross Members & Assembly Brackets26.Assembly Foot Control Modules.
Some of the products that the company deals with are as follows:-
8/9/2019 AutoLine Industries Ltd.
15/25
15 | P a g e
MANAGEMENT STRUCTURE
The Management Structure of Autoline Industries Pvt Ltd. is given below:
8/9/2019 AutoLine Industries Ltd.
16/25
16 | P a g e
BOARD OF DIRECTORS
In all there are 10 Board of Directors. The day-to-day affairs of the company are being
managed by Mr. Shivaji Akhade, Managing Director. The Board of Directors comprises of the
following:
8/9/2019 AutoLine Industries Ltd.
17/25
17 | P a g e
Name Status
Mr. Vilas Lande Chairman
Mr. Gopal Patwardhan Executive Chairman
Mr. Shivaji Tukaram AkhadeManaging Director and Chief Executive
Officer (CEO)
Mr. M. Radhakrishnan Joint Managing Director
Mr. Sudhir Vitthal Mungase Wholetime Director
Mr. Prakash B. Nimbalkar Independent Director (Non-Executive)
Mr. Vijay K. Thanawala Independent Director (Non-Executive)
Mr. Abraham Koshy Independent Director (Non-Executive)
Mr. Ajit B. Karnik Independent Director (Non-Executive)
Mr. Stanton Dodson Director (Non-Executive)
OBJECTIVE OF THE PROJECT
The project is prepared to fulfil various objectives. The objective to prepare this project is:
I. To understand the working of an automotive industry.II. To understand how the company works in real sense.
III. To understand the different ways by which the different parts of an automotive is made.
8/9/2019 AutoLine Industries Ltd.
18/25
18 | P a g e
IV. To realize the importance and the role played by the company in the economy.
MANUFACTURING & OPERATIONS DETAILS
Metal Stamping manufacturing is the process of creating metal parts by applying
extreme pressure to a blank piece on metal and forming the metal into a desired shape. The
stamping machine incorporates a specially made form or die which gives the stamped part shape.
8/9/2019 AutoLine Industries Ltd.
19/25
19 | P a g e
Most metals may manufactured using the stamped process these include:
y Aluminum (most alloys)y
Brass
y Steel, Cold rolledy Coppery Steel, Galvanizedy Steel, Hot Rolled, Cold Rolledy Stainless Steely Titaniumy Zinc
Machines used in stamped manufacturing range from a simple hand press or hydraulic press,
to the much larger machines referred to as drop hammers. All stamping machines incorporate a
form or die to give the stamped metal the desired shape.
Stamping manufacturing processes include the following specific manufacturing processes or
techniques:
y Fine Blankingy Deep Drawingy Multislide Stampingy Fourslide Stampingy Wire forming
8/9/2019 AutoLine Industries Ltd.
20/25
20 | P a g e
y Progressive Stamping
Depending on the complexity of the part, additional manufacturing steps required for the
final part, will drive the effective cost-per-part of stamping manufacturing. Typical stamping
speeds do vary, however many high production stamping manufacturers are capable of 30 to 80
stamping stokes per minute.
Besides, wielding & piercing is also done in the company.
SUPPLIERS & CUSTOMERS
SUPPLIERS:
The main raw material for manufacturing operations is mild steel and alloy steel which
is sourced directly from manufacturers such as Tata Steel Ltd, Bhushan Steel Ltd, Ispat Ltd,
Essar Steel Ltd. The following grades of steel in our manufacturing processes:
THICKNESS ( in mm) GRADE CONSUMPTION (MT)
8/9/2019 AutoLine Industries Ltd.
21/25
21 | P a g e
0.7 D513 3000
1.2 D513 2520
1.0 EDD513 2436
1.0 D513 22681.6 DD1079 1200
2.0 DD1079 1368
Other Grades - 7632
Total Consumption per
Annum20424
The required raw material is available in large quantities and according to our qualitative
requirements.
CUSTOMERS:
Following are the customers of the company:
Name2004-05
Rs. In millions
2005-06
Rs. In millions
Gross Sales 684.82 1113.26
% of Contribution in total sales
8/9/2019 AutoLine Industries Ltd.
22/25
22 | P a g e
Company has advantage of being a single source supplier to Tata Motors, which provides
it huge potential for not just TataMotors but also Fiat India.The company supplies about 86%
of its products to Tata Motors Ltd and Bajaj Auto Limited. The single source supplier of
more than 100 components for the Tata Indica, Indigo & Marino Cars. They are also the single
source supplier for load bodies for the Tata Mini 1-Ton truck Ace.
FINDINGS & OBSERVATIONS
During our visit to Autoline Industries Ltd and while preparing this report, I observed
various things. They are:
1. They have adopted the technique of water harvesting to avoid pollution of water .2. The company has adopted high standards of safety.
Tata Motors 81.09 84.39
Bajaj Auto Ltd. 7.25 2.75
Ganage Pressings Pvt. Ltd. 0.73 0.97
Fiat India Pvt. Ltd. 0.48 -
Kailash Vahan Udyog Ltd. 0.29 0.48
Mahindra & Mahindra Ltd. - 0.26
Other sundry customers 10.16 11.12
8/9/2019 AutoLine Industries Ltd.
23/25
23 | P a g e
3. They also give a lot of importance to time management i.e they have proper shift timingsso that the workers get enough rest.
4. The industry is equipped with fully automatic machinery.
SUGGESTIONS
After the visit and while preparing this report I think there are certain things that the company
should take care of.
1. The workers working near or with the welding machines should be provided with specialmaterial of clothes that does not burn with the sparks when the welding is done.
2. Fire extinguishers should be installed in and around the manufacturing unit.
8/9/2019 AutoLine Industries Ltd.
24/25
24 | P a g e
3. The working area should be more lighted.4. There should be more ventilation.
BIBLIOGRAPHY
I took certain references and various help while preparing the project. The internet was the
main source from where we found the information. The list of URLs used for the reference is
listed below:
1. http://www.ibef.org/industry/autocomponents.aspx2. http://www.autolineind.com/3. http://www.stampritemachine.com/hot_stamping.htm
8/9/2019 AutoLine Industries Ltd.
25/25
25 | P
4. http://metals.about.com/gi/dynamic/offsite.htm?zi=1/XJ/Ya&sdn=metals&cdn=money&tm=7&f=00&tt=14&bt=0&bts=0&zu=http%3A//www.cauffiel.com/
5. http://www.engineersedge.com/manufacturing/hot_stamping.htm6. http://www.neptuneparts.com/7. http://www.searchindia.com/search/Autos/Auto_Components/index.shtml